Oracle Hyperion Financial Management, Fusion …...Oracle Hyperion® Financial Management, Fusion Edition Service Pack 11.1.1.3.50 Readme About This Service Pack This Readme file describes

Oracle Hyperion® Financial Management, Fusion Edition

Service Pack 11.1.1.3.50

Readme

About This Service Pack

This Readme file describes the defects fixed in this Service Pack as well as the necessary requirements

and instructions for installing this release.

Caution: You are urged to carefully read and understand the following requirements. Failure to comply

may result in applying a service pack that can cause your application to malfunction, including

interruption of service and/or loss of data. Before installing or applying this service pack:

Verify that your system configuration (product version and service pack level, platform) exactly

matches what is specified in the Readme.

Supported Paths to This Service Pack

You can apply this Service Pack to the following release:

Oracle Hyperion Financial Management 11.1.1.3

Supported Platforms

Microsoft Windows 2003 SP1

Supported Languages

All

Dependencies

Before applying this release, perform these tasks:

1. Determine if you need to patch the OPatch tool on each computer hosting EPM System

products as follows:

a. From a command prompt, navigate to

b. Execute the command:

2. If the version is greater than or equal to 10.2.0.4.9, skip to “Installing This Service Pack”.

3. If the version is less than 10.2.0.4.9, apply the OPatch patch as follows:

a. On My Oracle Support, navigate to the Patches and Updates page.

b. Search for the patch number 6880880.

c. Select the 10.2 version.

d. View the Readme for instructions to apply the pack.

NOTE: The Patch 6880880 Readme file says to unzip the files to Oracle Home. Instead,

unzip the files to Hyperion Home.

Required Microsoft Patches

Microsoft has identified a security issue that could allow a hacker to compromise your Windows based

system. The Microsoft VC 2005 SP1 ATL redistributable pack MUST be installed prior to installing

this Service Pack.

On a 32-bit machine, you must install the Microsoft 32-bit ATL security update before you install this

Service Pack.

On a 64-bit machine, you must install BOTH the Microsoft 32-bit ATL security update AND the

Microsoft 64-bit ATL security updates before you install this Service Pack, or 32-bit client menus will

not display in the 64-bit environment.

The updated VC 2005 redistributable is available here for both x86 (32-bit) and x64 (64-bit):

http://www.microsoft.com/downloads/details.aspx?familyid=766A6AF7-EC73-40FF-B072-

9112BAB119C2&displaylang=en

Service Pack Type

This Service Pack replaces files in the existing installation, and does not require a full installation.

This Service Pack replaces the following files:

On 32-bit machines:

Client files:

%HYPERION_HOME%/products/FinancialManagement/Client/HFM.exe

%HYPERION_HOME%/products/FinancialManagement/Client/HsxDSSecurityps.dll

%HYPERION_HOME%/products/FinancialManagement/Common/HsvICACMps.dll

%HYPERION_HOME%/products/FinancialManagement/Common/HfmAwbAgentps.dll

%HYPERION_HOME%/products/FinancialManagement/Common/HsvDSRulesOMps.dll

%HYPERION_HOME%/products/FinancialManagement/Common/HsvDataps.dll

%HYPERION_HOME%/products/FinancialManagement/Common/HsvSystemInfops.dll

%HYPERION_HOME%/products/FinancialManagement/Client/HFMConfigUtil.exe

%HYPERION_HOME%/products/FinancialManagement/Common/HsvSecurityAccessps.dll

%HYPERION_HOME%/products/FinancialManagement/Client/HsvStringIDLib.dll

%HYPERION_HOME%/products/FinancialManagement/Client/HsvWebResources.dll

%HYPERION_HOME%/products/FinancialManagement/Common/HFMErrorHandler.dll

%HYPERION_HOME%/products/FinancialManagement/Consultant Utilities/XML2RLE.exe

http://www.microsoft.com/downloads/details.aspx?familyid=766A6AF7-EC73-40FF-B072-9112BAB119C2&displaylang=en

http://www.microsoft.com/downloads/details.aspx?familyid=766A6AF7-EC73-40FF-B072-9112BAB119C2&displaylang=en

Smartview files:








%HYPERION_HOME%/products/FinancialManagement/Web/HFMOfficeProvider/bin/App_Code.compiled

%HYPERION_HOME%/products/FinancialManagement/Web/HFMOfficeProvider/bin/HFMOfficeProvider_

deploy.dll


%HYPERION_HOME%/products/FinancialManagement/Web/HFMOfficeProvider/PrecompiledApp.config

Admclient files:










Server files:








%HYPERION_HOME%/products/FinancialManagement/Server/HFM Schema Upgrade.exe

%HYPERION_HOME%/products/FinancialManagement/Server/HsxADO.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HFMCopyAppLib.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HfmCopyApplication.exe

%HYPERION_HOME%/products/FinancialManagement/Server/HfmCopyAppCmd.exe

%HYPERION_HOME%/products/FinancialManagement/Server/HsvCalculate.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvData.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDataSourceImpl.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSCalcStatus.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSCalculate.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSData2.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSICM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSJournals.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSReports.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSSQL.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvEPUACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvICACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvJournals.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvRetrieveACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvSecurityAccess.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvSecurityLoadACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvStarSchemaACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvSystemActivity.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvSystemInfo.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvWebFormGeneratorACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsxDSSecurity.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsxSQLHelper.dll


%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSMetadata2.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResBrazillian_Portuguese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResDanish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResDutch.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResFinnish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResFrench.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResGerman.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResItalian.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResJapanese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResKorean.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2Resources.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResPolish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResRussian.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResSimplified_Chinese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResSpanish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResSwedish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResTraditional_Chinese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResTurkish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/InteropJava.jar

%HYPERION_HOME%/products/FinancialManagement/Server/HsxServer.exe

%HYPERION_HOME%/products/FinancialManagement/Server/HsxSecurity.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSTransactions.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSSystemInfo.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSSystemChange.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSRulesOM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSMemberListScript.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSMemberLists.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvDSDataCubes2.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvClusterController.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HfmAwbAgent.exe

%HYPERION_HOME%/products/FinancialManagement/Consultant

Utilities/HFMAuditExtractCmdLine.exe

%HYPERION_HOME%/products/FinancialManagement/Consultant Utilities/HFMAuditExtractUtility.exe


%HYPERION_HOME%/products/FinancialManagement/Server/HsxDSNs.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsxSystemConfig.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsxServerImpl.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvReportGeneratorACM.dll

%HYPERION_HOME%/products/FinancialManagement/Server/lib/BIPubSystemReports.exe

%HYPERION_HOME%/products/FinancialManagement/Consultant

Utilities/HFMAuditExtractSchemaDefs.xml

Webapp files:

%HYPERION_HOME%/products/FinancialManagement/Web Server/HFMwICTransactions.dll



%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/DataAudit.asp

%HYPERION_HOME%/products/FinancialManagement/Client/HFM.exe




%HYPERION_HOME%/products/FinancialManagement/Client/HsvWebClient.dll

%HYPERION_HOME%/products/FinancialManagement/Client/HsvWebFormsACV.dll

%HYPERION_HOME%/products/FinancialManagement/Client/HsxDSSecurityps.dll





%HYPERION_HOME%/products/FinancialManagement/Server Working Folder/Report Style

Sheets/Journal/HFM_JournalSimple.xsl

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResBrazillian_Portuguese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResDanish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResDutch.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResFinnish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResFrench.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResGerman.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResItalian.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResJapanese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResKorean.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResPolish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResRussian.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResSimplified_Chinese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResSpanish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResSwedish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResTraditional_Chinese.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2ResTurkish.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvTier2Resources.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsvSecurityAccess.dll

%HYPERION_HOME%/products/FinancialManagement/Web Server/Mailer.dll

%HYPERION_HOME%/products/FinancialManagement/Web Server/HFMwAwbHandler.dll

%HYPERION_HOME%/products/FinancialManagement/Web Server/HFMwDataGrid.dll

%HYPERION_HOME%/products/FinancialManagement/Web Server/HFMwXMLtoVBScriptGenerator.dll

%HYPERION_HOME%/products/FinancialManagement/Web Server/HFMwSystemInfo.dll

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/global.asa

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Common/Async.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/HFMProcessControlPanelGridInt

erface.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/ProcessControlPanel.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/ProcessControlPanelOptions.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/WDEFCellFunctions.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/WdefInterface.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/WebFormClientScript.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/XMLDataGrid.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/wdef.xslt

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Data/wdefExcel.xslt

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/DocMgr/DocMgr.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/DocMgr/DocMgr.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/DocMgr/DocMgrCommon.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/DocMgr/OpenItem.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/EIE/EIEFunctions.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/EIE/EIEListener.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/EIE/HfmAwbListener.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/GlobalWorkspaceNav/bpm/js/com/hy

perion/hfm/web/common/HfmTaskTree.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/GlobalWorkspaceNav/bpm/js/com/hy

perion/hfm/web/common/HfmTree.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/GlobalWorkspaceNav/bpm/modules/c

om/hyperion/hfm/web/appcontainer/Handler.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/IntercompanyTransactions/AutoMatch

.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/IntercompanyTransactions/ICAlertOpt

ions.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/IntercompanyTransactions/NewEditIC

Transaction.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Journals/OpenJournal.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Journals/ProcessJournalsQueryDef.as

p

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/LoadExtract/ProcessLoadData.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/LoadExtract/ProcessLoadJournals.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/MbrSel/MbrSel.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/MbrSel/Tree.js

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/OwnershipManagement/EPUFilterOpti

ons.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Reports/ProcessICPPOV.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Reports/ProcessJournalReportsPov.as

p

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Reports/checkStatus.asp


%HYPERION_HOME%/products/FinancialManagement/Server/HsxDSNs.dll

%HYPERION_HOME%/products/FinancialManagement/Server/HsxSystemConfig.dll

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Administration/RunningTasks.asp

%HYPERION_HOME%/products/FinancialManagement/Web/HFM/Workspace/Preferences.asp

On 64-bit machines:

Client files:

%HYPERION_HOME%/FinancialManagement/Client/HFM.exe

%HYPERION_HOME%/FinancialManagement/Client/HsxDSSecurityps.dll

%HYPERION_HOME%/FinancialManagement/Common/HsvDataps.dll

%HYPERION_HOME%/FinancialManagement/Common/HsvSystemInfops.dll

%HYPERION_HOME%/FinancialManagement/Common/HsvICACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/HfmAwbAgentps.dll

%HYPERION_HOME%/FinancialManagement/Common/HsvDSRulesOMps.dll

%HYPERION_HOME%/FinancialManagement/Client/HFMConfigUtil.exe

%HYPERION_HOME%/FinancialManagement/Common/HsvSecurityAccessps.dll

%HYPERION_HOME%/FinancialManagement/Common/HFMErrorHandler.dll

%HYPERION_HOME%/FinancialManagement/Client/HsvStringIDLib.dll

%HYPERION_HOME%/FinancialManagement/Client/HsvWebResources.dll

%HYPERION_HOME%/FinancialManagement/Consultant Utilities/XML2RLE.exe

%HYPERION_HOME%/FinancialManagement/Client/32bit/CHGLIST.VBS

%HYPERION_HOME%/FinancialManagement/Client/32bit/ClipBoard.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFM.exe

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsxClient.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFM_xerces-c_2_4_0.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/hfm.ico

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMAddin.xla

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMcCalculate.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMConfigure.exe

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMConfigure.ico

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMConfigUtil.exe

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMConstants.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMRulesEditor.exe

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMRulesEditor.ico

%HYPERION_HOME%/FinancialManagement/Client/32bit/HFMRulesEditor.ini

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsButtonBar.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsDataControl.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvActions.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvADMDriver.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvAppProfileSnapIn.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvAuditExtract.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvButtonBarInfo.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvButtonPad.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvcDataLoad.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvCoreVCSnapIn.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvDataExplorerGrid.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvDimensionEditorSnapin.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvGgeRetsae.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvHALDriver.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvJournalLoadACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvJournalsACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvJournalsExSnapIn.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvLoadExtractCommonSI.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvLoadExtractOptions.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvMetadataAPP.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvMetadataLoadACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvMetadataXML.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvNavigationTree.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvParseHTTP.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvPOVSelection.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvReportGeneratorACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvResourceManager.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvRulesLoadACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvSecurityLoadACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvStringIDLib.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvTaskPad.ocx

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvTier1Resources.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvTier1TransResources.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvVirtualGrid.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvVirtualTree.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebClient.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebFormsACV.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResBrazillian_Portuguese.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResDanish.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResDutch.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResFinnish.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResFrench.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResGerman.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResItalian.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResJapanese.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResKorean.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResources.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResPolish.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResRussian.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResSimplified_Chinese.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResSpanish.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResSwedish.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResTraditional_Chinese.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvWebResTurkish.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsvXFSGgeRetsae.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsxClientUI.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsxCommonDialogs.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsxDSSecurityps.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsxSecurityps.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HsxServerImplps.dll

%HYPERION_HOME%/FinancialManagement/Client/32bit/HSX_CONTEXTSEN.HLP

%HYPERION_HOME%/FinancialManagement/Client/32bit/HTML_doc.ico

%HYPERION_HOME%/FinancialManagement/Client/32bit/vc6-re200l.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HatEx.exe

%HYPERION_HOME%/FinancialManagement/Common/32bit/HFM_xerces-c_2_4_0.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/InteropJava.jar

%HYPERION_HOME%/FinancialManagement/Common/32bit/InteropJava.properties

%HYPERION_HOME%/FinancialManagement/Common/32bit/mfc80u.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/msvcp80.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/msvcr80.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/og801nodbas.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/ogc801r.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/vcredist_x86.exe

%HYPERION_HOME%/FinancialManagement/Common/32bit/HfmAwbAgentPS.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HFMCASSecurity.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HFMErrorHandler.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HfmGridACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HFMWebMetadataACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvADMDriverACM2ps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvCalculateps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvClusterControllerps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDataACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDataCubesps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDataExplorerACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDataps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDataSourceps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDBManagementACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDSMemberListScriptps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDSRulesOMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvDSSQLps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvEPUACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvEventLog.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvFileTransferps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvICACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvICMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvJournalLoadACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvJournalsACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvJournalsps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvLoadFileConverter.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvMetadataps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvProcessFlowACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvProcessFlowps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvReportGeneratorACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvReportsps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvResourceManagerps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvRetrieveACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvScriptEngineps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSecurityAccessps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSecurityLoadACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSessionps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSharedAppData.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSharesCalculationsACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvStarSchemaACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSystemChangeps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvSystemInfops.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvUserPrefACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvWebACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvWebFormGeneratorACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvWebJournalsACMps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/HFM_version.xml

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsxServerps.dll

%HYPERION_HOME%/FinancialManagement/Common/32bit/vcredist_x86.exe

%HYPERION_HOME%/FinancialManagement/Common/32bit/HsvMetadataLoadACMps.dll

%WINDIR%/SystemWOW64/ASYCFILT.DLL

%WINDIR%/SystemWOW64/atl.dll

%WINDIR%/SystemWOW64/COMCAT.DLL

%WINDIR%/SystemWOW64/comdlg32.ocx

%WINDIR%/SystemWOW64/INETWH32.dll

%WINDIR%/SystemWOW64/MFC42.DLL

%WINDIR%/SystemWOW64/MSCOMCTL.OCX

%WINDIR%/SystemWOW64/MSVCIRT.DLL

%WINDIR%/SystemWOW64/MSVCP60.DLL

%WINDIR%/SystemWOW64/MSVCRT.DLL

%WINDIR%/SystemWOW64/ogocxgrd.ocx

%WINDIR%/SystemWOW64/OLEAUT32.DLL

%WINDIR%/SystemWOW64/OLEPRO32.DLL

%WINDIR%/SystemWOW64/Roboex32.dll

%WINDIR%/SystemWOW64/STDOLE2.TLB

%WINDIR%/SystemWOW64/TList6.ocx

%WINDIR%/SystemWOW64/MFC71u.dll

%WINDIR%/SystemWOW64/atl71.dll

%WINDIR%/SystemWOW64/msvcp71.dll

%WINDIR%/SystemWOW64/msvcr71.dll

Smartview files:








%HYPERION_HOME%/FinancialManagement/Web/HFMOfficeProvider/bin/App_Code.compiled

%HYPERION_HOME%/FinancialManagement/Web/HFMOfficeProvider/bin/HFMOfficeProvider_deploy.dll


%HYPERION_HOME%/FinancialManagement/Web/HFMOfficeProvider/PrecompiledApp.config

Admclient files:










Server files:








%HYPERION_HOME%/FinancialManagement/Server/HFM Schema Upgrade.exe

%HYPERION_HOME%/FinancialManagement/Server/HsxADO.dll

%HYPERION_HOME%/FinancialManagement/Server/HFMCopyAppLib_x64.dll

%HYPERION_HOME%/FinancialManagement/Server/HfmCopyApplication_x64.exe

%HYPERION_HOME%/FinancialManagement/Server/HfmCopyAppCmd_x64.exe

%HYPERION_HOME%/FinancialManagement/Server/HsvCalculate.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSCalculate.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvData.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDataSourceImpl.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSCalcStatus.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSData2.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSICM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSJournals.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSReports.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSSQL.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvEPUACM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvICACM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvJournals.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvRetrieveACM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvSecurityAccess.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvSecurityLoadACM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvStarSchemaACM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvSystemActivity.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvSystemInfo.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvWebFormGeneratorACM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsxDSSecurity.dll

%HYPERION_HOME%/FinancialManagement/Server/HsxSQLHelper.dll


%HYPERION_HOME%/FinancialManagement/Server/HsvDSMetadata2_x64.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResBrazillian_Portuguese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResDanish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResDutch.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResFinnish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResFrench.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResGerman.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResItalian.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResJapanese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResKorean.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2Resources.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResPolish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResRussian.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResSimplified_Chinese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResSpanish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResSwedish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResTraditional_Chinese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResTurkish.dll

%HYPERION_HOME%/FinancialManagement/Server/InteropJava.jar

%HYPERION_HOME%/FinancialManagement/Server/HsxServer.exe

%HYPERION_HOME%/FinancialManagement/Server/HsxSecurity.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSTransactions.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSSystemInfo.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSSystemChange.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSRulesOM.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSMemberListScript.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSMemberLists.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvDSDataCubes2.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvClusterController.dll

%HYPERION_HOME%/FinancialManagement/Server/HfmAwbAgent.exe

%HYPERION_HOME%/FinancialManagement/Consultant Utilities/HFMAuditExtractCmdLine_x64.exe

%HYPERION_HOME%/FinancialManagement/Consultant Utilities/HFMAuditExtractUtility_x64.exe


%HYPERION_HOME%/FinancialManagement/Server/HsxDSNs.dll

%HYPERION_HOME%/FinancialManagement/Server/HsxSystemConfig.dll

%HYPERION_HOME%/FinancialManagement/Server/HsxServerImpl.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvReportGeneratorACM.dll

%HYPERION_HOME%/FinancialManagement/Server/lib/BIPubSystemReports.exe

%HYPERION_HOME%/FinancialManagement/Consultant Utilities/HFMAuditExtractSchemaDefs.xml

Webapp files:

%HYPERION_HOME%/FinancialManagement/Web Server/HFMwICTransactions.dll

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/DataAudit.asp

%HYPERION_HOME%/FinancialManagement/Client/HFM.exe






%HYPERION_HOME%/FinancialManagement/Client/HsvWebClient.dll

%HYPERION_HOME%/FinancialManagement/Client/HsvWebFormsACV.dll

%HYPERION_HOME%/FinancialManagement/Client/HsxDSSecurityps.dll





%HYPERION_HOME%/FinancialManagement/Server Working Folder/Report Style

Sheets/Journal/HFM_JournalSimple.xsl

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResBrazillian_Portuguese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResDanish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResDutch.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResFinnish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResFrench.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResGerman.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResItalian.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResJapanese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResKorean.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResPolish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResRussian.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResSimplified_Chinese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResSpanish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResSwedish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResTraditional_Chinese.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2ResTurkish.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvTier2Resources.dll

%HYPERION_HOME%/FinancialManagement/Server/HsvSecurityAccess.dll

%HYPERION_HOME%/FinancialManagement/Web Server/Mailer.dll

%HYPERION_HOME%/FinancialManagement/Web Server/HFMwAwbHandler.dll

%HYPERION_HOME%/FinancialManagement/Web Server/HFMwDataGrid.dll

%HYPERION_HOME%/FinancialManagement/Web Server/HFMwICTransactions.dll

%HYPERION_HOME%/FinancialManagement/Web Server/HFMwXMLtoVBScriptGenerator.dll

%HYPERION_HOME%/FinancialManagement/Web Server/HFMwSystemInfo.dll

%HYPERION_HOME%/FinancialManagement/Web/HFM/global.asa

%HYPERION_HOME%/FinancialManagement/Web/HFM/Common/Async.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/HFMProcessControlPanelGridInterface.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/ProcessControlPanel.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/ProcessControlPanelOptions.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/WDEFCellFunctions.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/WdefInterface.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/WebFormClientScript.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/XMLDataGrid.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/wdef.xslt

%HYPERION_HOME%/FinancialManagement/Web/HFM/Data/wdefExcel.xslt

%HYPERION_HOME%/FinancialManagement/Web/HFM/DocMgr/DocMgr.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/DocMgr/DocMgr.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/DocMgr/DocMgrCommon.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/DocMgr/OpenItem.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/EIE/EIEFunctions.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/EIE/EIEListener.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/EIE/HfmAwbListener.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/GlobalWorkspaceNav/bpm/js/com/hyperion/hf

m/web/common/HfmTaskTree.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/GlobalWorkspaceNav/bpm/js/com/hyperion/hf

m/web/common/HfmTree.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/GlobalWorkspaceNav/bpm/modules/com/hyper

ion/hfm/web/appcontainer/Handler.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/IntercompanyTransactions/AutoMatch.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/IntercompanyTransactions/ICAlertOptions.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/IntercompanyTransactions/NewEditICTransacti

on.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Journals/OpenJournal.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Journals/ProcessJournalsQueryDef.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/LoadExtract/ProcessLoadData.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/LoadExtract/ProcessLoadJournals.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/MbrSel/MbrSel.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/MbrSel/Tree.js

%HYPERION_HOME%/FinancialManagement/Web/HFM/OwnershipManagement/EPUFilterOptions.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Reports/ProcessICPPOV.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Reports/ProcessJournalReportsPov.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Reports/checkStatus.asp


%HYPERION_HOME%/FinancialManagement/Server/HsxDSNs.dll

%HYPERION_HOME%/FinancialManagement/Server/HsxSystemConfig.dll

%HYPERION_HOME%/FinancialManagement/Web/HFM/Administration/RunningTasks.asp

%HYPERION_HOME%/FinancialManagement/Web/HFM/Workspace/Preferences.asp

This is a standalone service pack and includes all previous service fixes.

This Service Pack replaces the following Service Fixes:

8835335,8854048,8855934,8866755,8874344,8883709,8925824,8949113,8967462,9020842,902124

8,9064610,9086782,9128376,9147333,9176158,9176992,9179968,9206454,9243044,9292570,9306

617,9323968,9346191,9346952,9381004,9391735,9394096,9403948,9444073,9450270,9500130,95

49938,9588869,9656668,9704921,9840579,9861495,9899699

Top of Document

Defects Fixed in this Service Pack

10093437 Schema Upgrade Utility may cause a SQL error when copying data tables

10071779 Change of POV is not retained when opening a Web Form from a Task List

10021801 Database Optimization.

9981572 Performance Optimization for email alerting

9976375 Exporting [System] account members with Extended Analytics may cause HFM to

hang

9972110 Logon Optimization

9969273 Entity Details only reflects data from the last nature parameter when writing to the

same POV

9968948 Requires two clicks to make a cell active for data input in Web Data Entry Form

9968798 Decimal separators may not be recognized appropriately when loading WDEF from

Excel 2007

9968722 Creating new context in Apache to a second HFM Web Server may not succeed

9967185 Under IE7 and IE8 custom documents are opened with the name of the current .asp

page listed and not the name of the document

9955755 The POV not displaying when creating an HFM Task Flow

9947815 Under certain circumstances cell text may not display on a web form.

9947810 Use of Greek characters in a journal label may cause the journal not to display

properly

9947793 Under certain circumstances users with appropriate rights cannot save a web grid

9947711 After deleting a scenario via ERPI users may not be able to open an application

9947635 Under certain circumstances the Win32 client may fail to respond

9947154 Under certain circumstances an email alert may not be sent from Process Control.

9946826 Sending an email alert from Process Control may generate a HTTP 500 error

9946816 A journal report may not render as an XLS file when the POV was changed from the

default POV

9946791 The caching of validation accounts may show entities in process control as invalid

9946716 With an org by period application the manage ownership module may not display the

correct values when an inactive entity is included in the org structure

9946646 Web Forms with certain decimal and thousand separators cannot be exported to

Excel

9946642 May be unable to open a journal through the “entity details” module

9946577 Under certain circumstances the OK button in process control may not respond

9946101 Extraneous characters being added to cell text when web form is exported to Excel

and cell text is in Japanese

9946051 Under certain circumstances the HSDESCRIPTION function in Smart View will return

a “Null” value

9942103 Ownership information is not copied between scenarios for inactive entities

9942076 An Intercompany Transaction Report may not generate a full listing of the partner

entities

9942072 An Unexpected error may be generated when loading data in a replace by security

mode

9942068 Memory Optimization for metadata load

9942060 Running an Extended Analytics routine may not complete when using a VIP in the

environment

9942056 HFM may become unresponsive after performing a data synchronization in EPMA

between Planning and HFM

9942048 Would like to use the exchange rates from HFM in the Intercompany Transaction

module

9942043 Translations need to be performed prior to consolidations for sibling entities

9942018 Extended Analytics may not update the schema tables when a large organization is

being extracted

9941999 Changes to validation accounts for Phases 2-9 are not being retained

9941995 Running of extremely large consolidations may not complete.

9941979 Memory Optimization for sparse applications

9941949 Process Management should ignore inactive entities

9939201 A user‟s last information is not retained when a user opens a document from

document manager

9915008 Under certain circumstances the HFM Application Server Configuration utility may not

complete successfully

9910671 Loading metadata using an .app file will change the name of each custom dimension

to uppercase

9897236 Performance optimization for Smart View with use of double-byte characters

9865646 The ICPENTITIESAGGREGATIONWEIGHT property is not accepting a negative factor

9861479 In certain circumstances the comma and decimal separators are being extracted as a

“4” in data audit exports '4'

9856425 After use of the copy application utility a consolidation may not generate automated

consolidation journals

9848953 Under certain circumstances the “loading application” message may not disappear

even after the application has fully opened

9848212 Matching templates saved in a folder may not display in the Intercompany Matching

Screen

9828393 Under certain circumstances the status of some extraneous parent entities may

change to CN when loading metadata with new entities

9827833 The export to Excel doesn‟t work with Turkish decimal preferences

9819814 Current descriptions not displaying with the correct currency label

9815063 A journal report in XLS format may not complete with large number of records

9814474 After loading metadata in replace mode the calculation status for parent entities will

differ between adding a child member with no data or removing a child member with no data

9813935 Performance optimization for security load

9804380 Switching between applications may cause a requested document does not exist

error to appear

9796855 After using the copy application utility there are several instances of “Drill Through to

FDM” in the context menu

9793929 The error “ An error occurred generating HTML from XML and XSL” may occur while

opening a journal report with style sheet HFM_JOURNALSIMPLE.XSL

9779758 Data may not display in a journal report when sorting is used for both accounts and

entities

9777319 Rows on WDEF may be misaligned when using border styles

9734197 In certain circumstances the comma and decimal separators are being extracted as a

“4” in data audit exports '4'

9729086 If user name contains Turkish characters an email alert may not be sent

9728701 Optimization of synchronization between servers for removed data

9726727 Changing a column width on a form in Excel resulting in Excel truncating data

9725296 Under certain circumstances a journal with an invalid parent/child combination may

be posted

9725136 Performance optimization for task flow

9725116 Performance optimization for running Intercompany Matching Reports

9701572 The function OPENPERIODMULTIPLE may not open a period in a clustered

environment

9685795 The error “error occurred while accessing the safe array” may occur when logging in

after performing a loading a metadata change in the “UseSecurity” parameters in application

setting

9677889 Would like the HFMAUDITEXTRACTCMDLINE.EXE utility to extract either task audit or

data audit by alone

9655204 Phase submission updates may not synchronize across all HFM application servers

9645686 The user and calendar filters may not work in the task audit and data audit screens

9645275 An email alert may not be sent for successfully promoted entities if there was an

unsuccessful promotion of an entity during the session

9644284 When creating an application with a similar prefix to a deleted application the user

may not be able to add a new journal

9616069 When a user does not have access to a Web Data Entry Form in a task list, the form

was removed without any dialog message to the user

9546021 Under certain circumstances data may not be able to be locked for years prior to the

year specified in the “PHASEDSUBSTARTYEAR” parameter

9499544 An extract of data audit may not include the decimal and thousand separator

specified in user preferences

9471631 When navigating in HFM a user may receive a ' Loading....' message in the lower left

pane of the screen

9411101 When executing system reports from document manager a user may experience a

dialog box that remains open when the report has been closed

9403367 The “Drill Through to FDM” does not work when selected from a linked Web Data

Entry Form

9395108 Under rare circumstances a rule included in a deployed rule set for Calculation

Manager may not execute with a “force calculate”

9392247 The “Drill Through to FDM” option is not available for locked cells

9308043 The ECA status tooltip in Process Control may not display the correct number of

posted journals

9216167 An Intercompany Report will open in HFM format first after selecting XLS format

6853691 A user may be able to see a document name in a task list for which he doesn‟t have

security access

6576432 The function HS.ACCOUNT.ISICP is not returning “R” as a valid response

Top of Document

Known Issues in this Service Pack

The following issues are the noteworthy known issues of this release.

Accessibility

The buttons in the Financial Management content area are not accessible with keyboard shortcuts.

Only the top level keyboard navigation, for example, integration with Workspace menus and

toolbars, object palette, and accessing the Financial Management content area is supported.

Application

If Financial Management is not properly shut down, temporary files may remain upon reboot. To

ensure optimal performance, it is recommended that you delete all *.db.* file names from the

Financial Management Server Working folder before launching Financial Management.

If you do not allow enough space in the initial creation of the relational database tables (Oracle, MS

SQL, or IBM DB2), you can create applications, but you cannot open or delete applications. Refer to

your database guide when you create database tables.

HFM, HSV, and HSX are reserved names and cannot be used for application names or application

descriptions.

The ampersand (&) is not a supported character for any label in an application.

If you are using Financial Management and Planning on the same server, use a naming convention

to differentiate the applications; for example, Corp_Actual and Corp_Budget.

To execute Calculation logic on the Adjustment members of the Value dimension, the AllowAdjs

entity attribute must be enabled. If this attribute is not enabled, it can prevent an entity from

changing to a status of OK. Enabling this attribute allows the system to change the status for those

members to OK.

You may encounter an issue with not being able to open applications with certain MBCS naming

patterns on Oracle 10g and Oracle 9i. In Oracle versions 9 and 10, a change was made for double-

byte characters. Double-byte characters require two bytes to be stored in Oracle 9. This means

that an nvarchar2 field that is ten characters in size will not support ten double-byte characters.

Thus a user cannot create applications with more than 5 international characters.

When using an IBM DB2 database, double-byte characters in application names are only supported

with DB2 8.1 FP10 and 8.2 FP3.

If yellow triangles display when you are trying to create an application, ensure that Shared

Services is running or that the connection is established.

To access Financial Management Administrator menu items and functions in Workspace, you must

be assigned these security roles: Creator Group and Dimension Editor.

In Financial Management, you must be assigned the Project Manager global security role to delete

a Financial Management application in both Classic Application Administration and EPMA. If you do

not have the Project Manager role, the application does not delete successfully.

If you are using an Oracle database, certain characters in the Financial Management application

name may prevent you from creating applications. Do not use the Turkish “i” or the German

“sharp ess” in an application name.

Consolidation

When running a consolidation the following error may occur: “An unknown error has occurred in

the HsvData2 object” with a description of: “Value violated the integrity constraints for a column or

table” and the following problem: “Cannot insert duplicate key in object”. To solve this error,

invalid records need to be deleted.

Data Audit

The filter functionality is not operable in Data Audit. Specific members may be typed into the filter

boxes.

Database Management

In an Organization by Period application copying data for a list of entities that has invalid entities

will fail. In order to copy this, the list needs to be narrowed to eliminate invalid entities.

Document Manager

Financial Management prevents users from loading a custom document in override mode with the

same name as a document already loaded but with a security class to which they do not have

access. The error message does not clearly state the reason of the failure: “Failed Security error:

user does not have All access.”

A text document (*.txt) containing German keyboard characters does not retain its original

contents after it is loaded into a Financial Management application. You must extract the files and

view them in your native viewer (for example, Notepad or Wordpad).

Special characters in document names (@, ., #,(),$,%,&) cause load failures or truncated file

names.

ERPI Integrator

For Classic applications only one language is supported. The default language selected in the ERPI

application registration screen is used to populate the first language in the list of languages in HFM.

It is possible that the default language selected in ERPI could be English, and the first language in

HFM is French, and the English member description get pushed to the French descriptions in HFM.

It is important to make sure this is correctly setup in ERPI for the first release.

For EPMA enabled applications languages will be supported up to the HFM allowed limit of ten.

However, the case sensitivity for languages still occurs. Languages must match exactly. Please

note that the default selection in the target application registration screen is ignored and ERPI

attempts to find a match between the ERPI list and the alias member list from EPMA.

ERPI is case sensitive when loading Metadata. Source systems may allow the creation and

maintenance of the same member in different cases. So, CORP and Corp could both reside in the

source ERP and ERPI will see this as two different members. HFM will not support this. See ERPI

Admin Guide for further details.

ERPI and source ERPs also support special characters in member labels like “-“ and “/”. HFM will

not support these characters for member labels. See the ERPI Administrator’s Guide for further

details.

Exchange rates are not interfaced directly into HFM, and the users will need to manually take them

from the AIF_HS_EXCHANGE_RATES table and insert them into HFM manually. See the ERPI

Administrator’s Guide for further details.

ICP dimensions members that are auto-created based on the entity dimension during the

deployment process are not shown in the target section of the detailed member mapping screen for

ERP Integrator. The only members shown as targets for the ICP dimension are the system members and user created members.

Extended Analytics

Star schemas created in earlier versions of Financial Management (Release 3.0.3 and 3.0.2a) are

not available for update with this release. New information, such as member descriptions, user-

defined fields, and account types are now included in the Extended Analytics export. These changes

result in new columns that are added to the dimension tables in the star schema, which make the

old tables incompatible.

Cell text and line item detail are not written to the star schema.

An issue arises with export/import of metadata from Financial Management to a Hyperion Essbase

database, through Integration Services. Extended Analytics doesn‟t pick up metadata in the same

order that metadata appears in the Financial Management application because of an additional field

for Financial member order, which is missing.

If you are using Microsoft SQL Server as a target database for the Extended Analytics module, an

issue may arise when the default language on the DBMS and Application Servers is Turkish. If a

database user name stored in the Extended Analytics target UDL file contains the letter “I”,

Extended Analytics extracts fail. One workaround is to use a username that does not contain the

letter “I”. If the DBMS username must contain the letter I, you must edit the registry on all

Financial Management Application Servers as follows:

Set the value of the EAUseODBC registry entry to a value of zero (0). If this registry value does not

exist in the system, create it and assign the value of 0. This forces the Extended Analytics module

to use ADO connectivity instead of ODBC to connect to the target DBMS.

Key: HKEY_LOCAL_MACHINE\Software\Hyperion Solutions\Hyperion Financial

Management\Server

Value Name: EAUseODBC

Value Type: DWORD

Value: 0

Installation

For known installation and configuration issues, see the Oracle Hyperion Enterprise Performance

Management System Installation and Configuration Readme.

Intercompany Transaction Module

Asynchronized processing support – The following processes support asynchronized processing:

Load Transactions, Auto-Match, Post All, UnPost All, UnMatch All, Delete All, Matching Report by ID,

Matching Report by Account, and Transaction Report.

Each of the processes is recorded in the Running Task window, enabling you to view the progress

of each process as well as to stop the task. You can also select the log from the Running Task

window to view the status information after the process is completed.

You must refresh the Process IC Transaction screen to view the updated status information after

these processes: Post All, UnPost All, UnMatch All, Delete All. After you click OK when the Refresh

message displays, and run the process, to refresh the status in the Process IC Transaction screen,

click the Update button again and the status will be refreshed.

Matching Report and Transaction Report – To view either the Matching Report or the Transaction

Report, you must click the report icon next to the Report task recorded in the Running Task

Window after the process is completed.

Use the HFM format for executing the ICT matching report by transaction ID. The BI Publisher

versions may not be correct.

Matching Report processing – The processing of the matching report is driven by the Entity‟s

transactions. Therefore, if the Entity does not have a transaction with the Partner but the Partner

has a transaction with the Entity, the Partner transaction is not captured in the matching report. In

order for this transaction to be processed, you must specify the Partner entity in the Entity

selection.

Auto-Match by Account – The auto-match by account process performs the matching of

transactions based on the selection for the Entity and the Entity Account. For example, suppose

you have the following four transactions for matching:

A ICRec B

B ICPay A

B ICRec A

A ICPay B

If your matching selection is Entity = A, Partner = <blank> for all partners, and if your matching

accounts are ICRec with ICPay, the system will use the selection for Entity and Entity Account as

the basis for matching. Hence, the system will match based on Entity A and Account ICRec. The

result from this matching process will return ONE match group.

A ICRec B

B ICPay A

If you would like the system to also match A‟s ICpay with B, you will need to also specify another

matching account set of ICPay with ICRec. Another option is to include B in the Entity selection so

that the system will also process the transaction of B ICRec with A and also includes the following

matching group.

B ICRec A

A ICPay B

Matching Report by Account – The Matching Report by Account will not include the reversed

matching. The process is assume that the “suppress reversed” option is ON by default. For

example, if you have the following transactions in the system:

A ICRec B

B ICPay A

B ICRec A

A ICPay B

If your report selection is Entity = A, Partner = <blank> for all partners, and if your matching

accounts are ICRec with ICPay, the system uses the selection for Entity and Entity Account as the

base for the matching report.

Thus, the system matches based on Entity A and Account ICRec. The result from this matching

report process displays ONE match group.

A ICRec B

B ICPay A

If you would like the system to also match A‟s ICpay with B, you will need to also specify another

matching account set of ICPay with ICRec. Another option is to include B in the Entity selection so

that the system will also process the transaction of B ICRec with A and hence will also include the

following matching group.

B ICRec A

A ICPay B

IC Transaction Detail Report – This report provides the transaction information in the format

specified by the user in the report layout. However, the system always sorts the transactions by

the Entity and Partner field first and then applies sorting to other fields specified by the user. This

issue will be addressed in future release.

Process IC Transaction – When you first enter the Process IC Transaction screen, you will see the

vertical scroll bar to your right and the horizontal scroll bar at the bottom. This vertical scroll bar

controls the scrolling for the browser page. However, if you want to control the vertical scrolling

for the transactions that are displayed in the IC transactions grid, you will need to use the

horizontal scroll bar to scroll to the right and you should see the vertical scroll bar that controls the

transaction grid.

Load Transactions – During the Load IC Transactions process, the system allows you to first scan

the load file for potential errors. However, upon completion of the scan process, the system must

refresh the load screen and clear the file name that you previously specified. This is the same

behavior in all other load processes in Financial Management and it will not be addressed in the

release. You must reselect the load file after the completion of the scan process if you want to

continue with the load transactions process.

Error Messages - The system may not provide appropriate error messages in some processes

performed in the IC Transactions module. For example, during the “Delete All” process, the system

does not provide a valid error message when there are Matched or Posted transactions. However,

the system correctly skips over the Matched or Posted transactions during the Delete process.

Windows 2003 – You may experience a timeout error when you run very large Matching reports on

Windows 2003.

You cannot load ICT transactions using a Turkish operating system.

Email notifications within Process Intercompany Transactions do not include all the dimensional

details within the body of the notification.

Journals

In Organization by Period applications, if you select inactive child-parent combinations, an "invalid

parent or child/parent combination" or "invalid entity" error message is displayed.

When you assign security rights to users for journal creation, you should assign users access to

Create Journals and Read Journals.

Oracle database is case-sensitive for Journal Group names.

There is an inconsistency for accepting field lengths that are too long in journals.

The filtering for journal templates within journal tasks is not operational for sorting of entities.

When a user is unposting a journal and the journals module becomes unavailable due to a

“transactions log full” condition on DB2, the journal may appear to be unposted but the unposting

may not have completed. The Database administrator should review the transaction logs regularly

to ensure that there is adequate space.

Load

If an invalid member list is loaded, Web users may not be able to access the Data Explorer grid. If

the following error message is displayed, it is recommended that you correct the member list,

reload it, and then access the Data Explorer grid:

"

"

On Windows 2003 with no Service pack, you do not receive a confirmation message when a load is

successful. You can review the log, but no message is displayed. This limitation does not exist with

Windows 2003 SP1.

For a data load, if you have Autoclose selected for the progress window, there is no opportunity to

review the load file log after the Load window closes. You can view the results in the progress

window immediately after the load completion.

When loading a metadata .APP file from an older release through the Web, the error log may

indicate the improper line number within the error message.

The Web may report a proxy timeout issue when loading large application files that have not been

converted to the latest schema formats. If the files are converted to the latest file formats using

the Win32 client, the updated files will load on the Web.

If you receive a proxy timeout error when loading large files, increase the Web proxy timeout or

use the Win32 client to load the file.

Lifecycle Management (LCM)

If you are running an LCM migration and experience an out of memory exception in IIS, open IIS

and change the following settings for HFMLCMservice:

1. Right-click on HFMLCMService Application pool and open the Properties page.

2. Select the Recycling tab and under Memory recycling, set these values:

Maximum virtual memory (in megabytes): 1000

Maximum used memory (in megabytes): 800

3. Click the Health tab and change the Shutdown time limit to 10800 seconds (3 hours).

4. Click on Apply, then OK to close the Properties page.

5. Perform IIS reset.

Localization

For all localized Financial Management applications where the data contains Unicode characters,

make sure to set “Exact all files in Unicode format” preferences for those applications. To set this

preference:

1. Log on to Workspace.

2. From the File menu, select Preferences.

3. Select Consolidation.

4. From the drop-down list, select the application.

5. Make sure that this option is selected: Extract Option – Save all files in Unicode format.

6. Click Save.

When you perform an LCM export operation on a Financial Management application, if the exported

content is incorrect and Unicode characters are removed, make sure that Save all files in

Unicode format is set for the source application.

When you are using Process Control, an error is returned when you select the Rates icon in a

localized version. The User Guide indicates that a predefined "Rates" grid must be created if you

want to access "Rates" from Process Control. If localized, the "Rates" grid must be named using

the localized string in order for the grid to be accessible.

In the Financial Management Configuration Utility, when you specify the cluster name, you cannot

use these special characters:

+ * # [ ] { } ( ) ; : , @ !

Metadata

A metadata load from an earlier version may not work and return a blank page.

To fix this, manually run the following command from command line on the Web Server machine:

regsvr32 %HHYPERION_HOME%\products\FinancialManagement\Client\HsvMetadataXML.dll.

Metadata Synchronizations

Shared Services no longer supports metadata synchronization. To share dimensions (hierarchies) with

Financial Management and Planning, use EPMA functionality.

Oracle Databases

To improve performance in Oracle, the DBA should run statistics on the ICTTransactions table. There are a

variety of utilities and commands available to perform this task. Following is a sample of one of the commands that you can use:

Performance Management Architect

For information on Performance Management Architect (EPMA) issues, see the Oracle Hyperion

Enterprise Performance Management Architect Readme.

Process Management/Process Control

If Process Management was included in a tasklist from a prior version, when you select Process

Management, you will be redirected to the new Process Control page. You should remove the old

reference and replace it with the new Process Control module.

For DB2 8.1 or 8.2, only one document can be attached to a subcube during any process

management action, per application.

Related Content

The error “80070005:Access is denied” is displayed when the URL is configured with the Fully

Qualified Domain Name. Use the following format when configuring Related Content in the EPM

Configurator:

o

( will not work)

Running Tasks

Running Tasks are no longer available if you set the AutoClearDataAfterSeconds registry key.

The help file in the running task log file is not available. The help file is available from the running

task main screen.

Security Administration

A user with the Load System role does not automatically have the Application Creator role assigned

when the application is converted from a Classic Administration Application to an EPMA application.

Users with the Load System role must be manually provisioned, or they cannot load metadata after

the application is converted.

Smart View

The Migration Utility does not convert the HFMLNK function unless the cell specifies this format:

HFMLNK (<value>, <POV>). For example, HFMLNK (V1, D1) where V1 is a cell reference to a

value, and D1 is a cell reference to a dimension would convert correctly, however, if you combine

the value and the POV into one cell reference, (HFMLNK (C1))it does not convert. It is

recommended that if any HFMLNK functions contain only one cell reference, that you find and

replace them with the specified format.

Due to a limitation in Microsoft Excel, if any cell in a workbook contains over 1024 characters, the

Migrate Active Workbook feature does not migrate the workbook. You can reduce the size of data

contained in one cell by referencing out multiple functions or removing dimensions to be set in the

background POV.

Software Development Kit (API)

The CELLSTATUS_CANREAD bit in “CALCSTATUSMIDDLEBITS” has been retired. It is suggested to

use the CELLSTATUS_NOREADACCESS bit to get the same info. As a reminder this value is

opposite from the CELLSTATUS_CANREAD bit.

For example, if the current code to check if a cell can be read is:

if ( !(status & CELLSTATUS_CANREAD )) { show error message that user cannot read the cell } This code can be changed to the following without changing the behavior.

if ( status & CELLSTATUS_NOREADACCESS ) {show error message that user cannot read the cell } For reference, the Cell Metadata Status Constants section in the HFM Object Guide now

becomes:

Cell Metadata Status Constants

The following constants represent metadata statuses for cells.

Table 116. tagCALCSTATUSMIDDLEBITS Enumeration

Constant Description

CELLSTATUS_CANREAD The cell cannot be read.

CELLSTATUS_DRILLABLE The cell allows drill through to the source of data.

CELLSTATUS_HASTEXT The cell contains a cell text description.

CELLSTATUS_INVALID Invalid metadata combination.

CELLSTATUS_ISADJUSTMENTMEMBER The cell’s Value dimension member is an ADJS member.

CELLSTATUS_ISINPUTFREQUENCY The cell is an input-level time period.

CELLSTATUS_NOREADACCESS The user does not have read access to the cell.

CELLSTATUS_NOWRITEACCESS The user does not have write access to the cell.

CELLSTATUS_SUPPORTSCHARTLOGIC The cell supports calculations.

CELLSTATUS_SUPPORTSCONSOLIDATION The cell supports consolidations.

CELLSTATUS_SUPPORTSLINEITEMS The cell supports line items.

CELLSTATUS_SUPPORTSPERIODALLOCATIONS The cell is a parent-level time period whose children are input cells.

CELLSTATUS_SUPPORTSTRANSLATION The cell supports translations.

HsvSystemInfo

The interface of HsvSystemInfo has changed. Any third-party utility or application compiled with

older HFM libraries that accesses one of the following methods needs to be rebuilt with the latest

HFM libraries.

The affected methods are as follows:

GetExtractFileEncoding

SetExtractFileEncoding

GetActivityUserID

EnumActivityUsers

SetCurrentActivity

GetCurrentActivity

AddTaskToAudit

EnumAuditTasks

ClearAuditTasks

DisableNewConnections

EnableNewConnections

EnumProhibitConnections

WarnUsersForShutDown

KillUsers

GetKillUserStatus

GetKillUsersStatus

CheckAccess

SetCurrentModule

EnumAuditTasks2

ClearAuditTasks2

AddTaskToRunningTasks

KeepRunningTaskStillAlive

GetRunningTaskStatus

ClearRunningTask

UpdateRunningTaskProgress

GetRunningTaskProgress

EnumRunningTasks

StopRunningTask

UpdateRunningTaskStatus

ExtractTaskAudit

UpdateRunningTaskProgressDetails

GetRunningTasksCount

GetActivityCodeDesc

UpdateRunningTaskLogFilePathName

GetRunningTaskLogFilePathName

EnumActivityServers

IsScheduledTaskReadyToRun

GetResourceFormattedString

UpdateRunningTaskPOV

EnumRunningTasksPOV

AddRefToHsxServer

ReleaseHsxServer

SetCurrentModuleEx

GetModuleName

EnumRunningTasksEx

OutputSystemInfo

GetLastModifiedDateForArtifact

GetCalcRulesType

GetWorkingDirectory

System Reports

In Journal reports, the style sheet type does not take effect if it is hard-coded on the Data tab as

the XML style sheet type or if the report is saved remotely.

Rows or columns may not display for Data Explorer system reports if the members selected are set

to description only and the members do not have descriptions in the metadata.

Account lists are not supported for Intercompany Matching Reports.

If you save a report in XML or HTML format and a blank screen is displayed, verify the entry first.

Then, if the entry is correct, save the report as an RPT file. A more descriptive error message is

displayed.

Intercompany Matching Reports may not run in an SSL environment.

When you run EPU reports the BI Publisher formats do not run properly if the Web server and

Application server are on different machines.

Using 64 bit HFM and running system reports using Oracle BI Publisher may result in an Access

Denied error. To fix this issue, perform the following steps:

A domain account should be used for the Financial Management Web Server and Financial

Management Application Server. On the IIS 6 Web Server, the Application Pool identity must be set

to the domain user, and the appropriate permissions must be set on the following:

c:\windows\help\iishelp\common: Read and Execute, List Folder Contents, Read

c:\windows\system32\inetsrv\ASP Compiled Templates: Full Control

c:\windows\IIS Temporary Compressed: Full Control

This user must also be added to the IIS_WPG group.

If you are running several reports concurrently (for example, Intercompany Reports), and they are

taking a long time to complete, you may need to add a Windows registry setting to increase the

number of concurrent threads allowed. Use these steps to create the registry setting:

1. Select Start, then Run, and in the Open box, type regedt32, and click OK.

2. Navigate to:

3. Create a DWORD Value type for NumAsyncThreads.

4. Set the number of concurrent threads allowed, and click OK.

System Configuration/Processing

When using Financial Management, you should turn off scanning mechanisms (for example, anti-

virus, Windows Automatic Updates). Running these in conjunction with Financial Management can

result in unexpected behavior.

Task Automation

Current Module field in „Running Tasks‟ may show additional characters for tasks initiated by task

automation, however this does not impact the running tasks.

If a Taskflow never reaches the Done status when executed on a standalone Web Server from the

Web Server-only installation, follow this procedure:

o Manually copy the server resource files (HsvTier2Res*.dll) from an application server machine

to a directory on the Web Server.

o Create this string value in the registry:

HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Financial

Management\ServerResourceDir.

o Set the ServerResourceDir value to the path where the resource files were copied.

If you are using Windows 2003, the Network Service, or the account running the application pool,

needs Read/Write access to the HKLM\Software\Hyperion Solutions\Hyperion Financial

Management key and below in order to execute multiple stages in a taskflow.

User Preferences

The selection “save all changes in Unicode format” is not modifiable.

Users on System

Module names are stored in the database in the language of the user running the module.

Utilities

CopyApplication Utility for Classic HFM Applications

Please find a detailed guide for use with the CopyApplication Utility for Classic Applications on the

Oracle Technology Network at: http://www.oracle.com/technology/products/bi/performance-

management/financial-management.html.

NOTE: If the 64-bit utility fails to copy large database tables using Oracle databases, use the 32-bit

version.

HFM Utilities

The latest release of HFMUtilities Utility can be accessed via Oracle Technology Network at:

http://www.oracle.com/technology/products/bi/performance-management/financial-management.html.

Please contact Margaret Reed at [email protected] with any questions. Richard Stang

is no longer supporting this utility.

Web Data Forms

Only static HTML code is allowed in the instructions section of Data Forms.

The Calc1 function only supports two operands; however, if a Web Data Form is created using

more than two operands, the form loads without error.

Data Forms scanned with errors and then scanned without issues are saved as Preview forms.

Optional HTML formatting options are ignored with forms in Firefox 1.07.

There is a registry key that controls the number of characters for both data and cell text in web

forms. The default is 70. However, if this key is implemented and changed, the data and/or cell

text can be truncated when loading data via a web form. The registry key is named:

WebExcelExportMaxChars and is located in: HKLM\Hyperion Solutions\Hyperion Financial

Managment\Web\WebExcelExportMaxChars. This registry key must be implemented on all HFM

application and HFM web servers.

Workspace

The View pane many render improperly when navigating directly between two Financial

Management applications if the View pane is minimized in the first application. Closing and

reopening the Financial Management application restores the View pane.

http://www.oracle.com/technology/products/bi/performance-management/financial-management.html




mailto:[email protected]

Changing the text size from the View menu is not supported.

When launching Shared Services from within a Financial Management application, you may get an

error when returning to the application after logging out of Shared Services. This error may occur

when you attempt to perform a new operation within Financial Management. This error displays:

“An error has occurred. Please contact your Administrator. Session has timed out”. You must

close, and then reopen the Financial Management application.

If EPM Workspace is accessed using Oracle HTTP Server (OHS) based on Apache 2.0 and is secured

by SSL, patch 6151956 must be applied in order to successfully perform HFM data load operations.

http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=6151956

When using some versions of Firefox (2.0.0.8, 3.0.10), the Browser View tree menu may not

completely load and will continue to display "Loading".

When this occurs, there may be issues with tooltip display, some popups may not display, and

there is an issue with the browser UI when closing an application (the pane containing the Browser

View remains even though the Workspace home page is displayed).

If this happens, the recommendation is to use Internet Explorer. Alternatively, select a different folder from the Browser View, close the app, refresh the browser

(F5), then re-open the application. This may intermittently address the issues.

If the issue does not occur upon opening the application in Firefox, the UI should function as

expected for the remainder of the user session.

To use multiple Financial Management Web servers from one Workspace server, use this

procedure:

Navigate to <server>\Hyperion\common\httpServers\Apache\2.0.52\conf.

Either or will have the following text:

ProxyPass /hfm http://webserver.hyperion.com:80/hfm ProxyPassReverse /hfm http://webserver.hyperion.com:80/hfm

To add another HFM web server and context, copy and paste the two lines above in the same file,

and make appropriate changes:

ProxyPass /hfmcontext1 http://webserver01.hyperion.com:80/hfm ProxyPassReverse /hfmcontext1 http://webserver01.hyperion.com:80/hfm

In this example, a new context was added (hfmcontext1) that is pointing to a different HFM

web server (webserver01).

Restart all Workspace services and Shared Services.

From User Preferences:

1. Select Application.

2. For Alternate WebServer, type in the new Web context name (for example, hfmcontext1).

3. Save the changes.

4. Log out, then log back in. You should be directed through the new Web context.

Top of Document

Installing this Service Pack

The section includes important information about installing this service pack.

http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=6151956

http://webserver.hyperion.com/hfm

http://webserver.hyperion.com/hfm

http://webserver01.hyperion.com/hfm

http://webserver01.hyperion.com/hfm

To apply this service pack:

1. Stop , , , and processes on

all tiers.

2. Download and unzip the downloaded service pack file, , to the

directory.

Note: is the name that My Oracle Support assigns to this service pack.

When you download the file, a message indicates what the filename is.

3. From a command line, change the directory to .

4. Check that the Central Inventory exists and contains the expected set of components by

entering the following command:

If this command does not return the expected set of components, the folder wasn't

created properly under during the installation. In this case, follow the steps

in “Resolving Central Inventory Issues” below before proceeding with these steps.

5. Enter the following command:

Windows:

6. Register the Mailer.dll using the following command:

%HYPERION_HOME%\products\FinancialManagement\Web Server\Mailer.dll

%HYPERION_HOME%\products\FinancialManagement\Web Server\Mailer.dll

Top of Document

Resolving Central Inventory Issues

If you found the Central Inventory to be missing or incomplete when running the

command (see the installation procedure above), use these sections to resolve these issues.

Verifying the Central Inventory

Additional actions to take to resolve issues with the Central Inventory:

1. Verify that contains an folder.

2. Verify that the Central Inventory folder on the system is writable by the current user; if not, you

must resolve this to proceed.

On Windows, the Central Inventory is located in:

.

3. If step 2 is resolved or is not an issue, but the folder is missing, follow the steps in

“Steps to Recreate the Central Inventory” below to recreate it.

4. Sometimes the folder is there but is not complete; if steps 1-3 still do not enable

patching, delete the existing folder and use “Steps to Recreate the

Central Inventory” below to recreate it.

Steps to Recreate the Central Inventory

1. If you receive a message about the Oracle Home entry already being defined in the Central

Inventory, you need to append the “EpmSystem” HOME_NAME entry in the file as shown in the

example below:

For example, change this entry:

To:

Top of Document

Uninstalling this Service Pack

To uninstall a service pack:

1. From a command line, change the directory to .

2. Enter the following command:

Windows:

Top of Document

Copyright © 2010, Oracle and/or its affiliates. All rights reserved. http://www.oracle.com

http://www.oracle.com/

Documents

Oracle Hyperion Financial Management, Fusion …...Oracle Hyperion® Financial Management, Fusion Edition Service Pack 11.1.1.3.50 Readme About This Service Pack This Readme file describes