Upload
adsila
View
21
Download
2
Embed Size (px)
DESCRIPTION
OR-PR 156. Fabricate a Standard Full Calf Cuff. Fabricate a Standard Full Calf Cuff. Cut a strip of leather 2 1/2” wide and the length of the largest calf circumference + 2 1/2”. 2 1/2”. Largest Calf Circumference + 2 1/2”. Fabricate a Standard Full Calf Cuff. - PowerPoint PPT Presentation
Citation preview
OR-PR 156
Fabricate a Standard Full Calf Cuff
Fabricate a Standard Full Calf Cuff Cut a strip of leather 2 1/2” wide and the
length of the largest calf circumference + 2 1/2”
Largest Calf Circumference + 2 1/2”
2 1/2”
Fabricate a Standard Full Calf Cuff
Cut out pearl/cream cow strip as long as cuff and about 2” wider
Make sure that stretch runs along length
Cuff width + 2”
Cuff length
STRETCH
Fabricate a Standard Full Calf Cuff
Glue back of cuff as well as cowhide
Fabricate a Standard Full Calf Cuff
Stretch cowhide lengthwise
Fabricate a Standard Full Calf Cuff Turn leather strip over, center, and adhere to
cowhide strip
Fabricate a Standard Full Calf Cuff Measure in 2 1/2 “ from each end and mark top
& bottom edges of cuff Cut cowhide at 45° angles as shown Glue edges of leather strip within cut lines
2 ½” 2 ½”
Fabricate a Standard Full Calf Cuff Fold and glue down cowhide over edges of cuff Sew around perimeter of cuff, 3/16” from edges
Fabricate a Standard Full Calf Cuff Trim away cowhide around perimeter of cuff Trim folded-over cowhide 1/8” from stitching Miter corners of cuff slightly
Fabricate a Standard Full Calf Cuff Your cuff is now ready to attach to the calf band