ACCESSORIES

OPTIONS

Seats ... we’re all about seats!

All Raz seats feature IPAS

Molded SeatsOur exceptionally durable Molded Seats are contoured to reduce sitting pressures, stabilize the pelvis and provide exceptional comfort.

At Raz, we believe that the most important component of a mobile shower commode chair is the seat. Since people come in many shapes and sizes, we offer an exceptionally large variety of seats. If none of these seats fit, our engineers can design a custom seat that will accomodate unique client needs.

Front BridgedZ405

AdjustedFully Rearward

AdjustedFully Forward

Rotated4.5°

Front AccessZ463M23

Front AccessZ410

Front AccessZ463M26

Front AccessZ420

AdjustedLaterally 1”

Front BridgedZ415

18”W Seats (4 configurations) • 2 depths (16”-18” and 19”-21”)• 2 access types (Front Bridged, Front Access)

HD Seats (2 configurations)• 23”W x 18”-20”D (for 22”W frames) • 26”W x 18”-20”D (for 24”/26”W frames)

Raz’s unique seat attachment brackets serve 2 functions: • They lock the seat in place but release easily for cleaning for interchangability.• IPAS Adjustment: Slots in the brackets allow the seats to be adjusted fore/aft, side-to-side and rotated up to • 4.5° Exclusive to Raz, IPAS (Ischial Pelvic Alignment System), allows for the seat to be adjusted for optimaIT positioning within the aperture.

1

Visco-Foam Interface Seats (VFI)VFI Seats are constructed with a top layer of 1” Visco Elastic Foam, upholstered on top of a Molded Seat, providing exceptional comfort and pressure redistribution.

Front BridgedZ436BRI

Rear AccessZ436RRO

Right AccessZ439RTO

Front AccessZ436FRO

Front BridgedZ439BRI

Rear AccessZ439RRO

Front AccessZ463V23

Front AccessZ463V26

Left AccessZ436LTO

Front AccessZ439FRO

Right Access Z436RTO

Left Access Z439LTO

18”W Seats (10 configurations) • 2 depths (16-18” and 19”-21”)• 5 access types (front, front bridged, left, right, rear)

HD Seats (2 configurations)• 23”W x 18”-20”D (for 22”W frames only) • 26”W x 18”-20”D (for 24”/26”W frames only)

2

When standard, off-the-shelf seats do not meet client needs, Raz will design a seat for optimized function, comfort and support. All custom seats are fabricated with 3-layers of proprietary foam and are supported by HDPE base, which is upholstered with 4-way stretch vinyl.

Some examples of custom seats...

Leg Length Discrepancy

CAT Seat withRear Access

HD Seat Left Access

SacralValley

Custom Seats

Seats ... cont’d

Everest&Jennings Replica Seats

EJRM – Molded EJRV – Visco Foam • Soft, molded foam replica of the E&J seat• Tear drop-shaped aperture• Deep side cutouts to facilitate self care• Size: 18”W x 16”-18”DOrder Code: Z4EJRM

• Visco Foam version of the E&J Replica seat• Tear drop-shaped aperture• Deep side cutouts to facilitate self care• Size: 18”W x 16”-18”DOrder Code: Z4EJRV

Shower-Only Molded

• Soft, molded foam with gentle contours for added comfort• Drainage slot• 5” of depth adjustability• Size: 18”W x 16”-21”DOrder Code: Z4SOM

3

Seat Options and Accessories

Pommel

Whizard® – Urine Deflector

• Lowers commode pan to provide access for self-care with pan in place• Four kits available: 1”, 2”, 3”, 4”Order Codes:1” – ZPSK12” – ZPSK23” – ZPSK34” – ZPSK4

• Unique width- and angle-adjustable design• Removable• Fits AT/CAT/AT600Order Code: ZPMLT

• Held in place with patent-pending wing feature• Can be positioned closer or further away from user• Will fit all Raz seats (excluding Shower-Only) as well as most toilet seatsOrder Code: ZIHW

Gimbled Front Seat Brackets• Raises front the front of the seat to create “dump angle” • Provides a height increase of 1” / 1.5” / 2” (approx., depending on seat depth) Order Code: ZGFSB10 for 1” increaseZGFSB15 for 1.5” increaseZGFSB20 for 2” increase

Commode Pan Spacer Kits

4

Back Frames and Back Supports All back heights are measured from the top of seat (molded) to top of back upholstery

Back Frame Width Different From Seat Frame Width

Adjusta-Backs (Standard with tension-adjustable upholstery)

• Height / Angle-adjustable, flip-up arm supports• Multiple straps allow optimal adjustment and keeps upholstery in place • Recess depth: up to 3” at top / up to 4.5” below horizontal back tube• Upholstery can be raised 2.5” (excluding 24”H)• Arm Locks Included – USA only

• The most common reason for choosing a back frame narrower than a seat frame is to provide optimal spacing between the arms on a base that will fit over a toilet.

• A common reason for choosing a back frame wider than the seat frame is to provide more space between the arms without going to the expense of a wider base frame.

Reclining Backs – for AP/SP/AT/CAT

• Available heights 18”/20”/24” • 30° of recline • 2-Point Reclining Arms• Tension-adjustable vinyl upholstery• Order Code: See order forms for all Reclining Backs

2” narrower 4” narrower 2” wider

Add frame width to complete order code (14”/16”/18”/20”/22”/24”) – 18”W is standardOrder Code:

15”H – Z509_ _ 20”H – Z510_ _ 17”H – Z515_ _ 24”H – Z520_ _

15”H 17”H 20”H 24”H

4

Symphony Back Support

Harmony Back Support

• Soft, durable molded foam pads • Contoured to minimize loss of seat depth• Fits back widths from 14” to 30”• Fits 17”, 18”, 20”, 24” back heights• Ideal for infection-control environments

• Molded, contoured back support• Fits 18”W back frames only• Fits 17” and 20” back frame heights• Ideal for infection-control environmentsOrder Code: Z749

Arm SupportsStandard Flip-Up Arms 2-Point Arms

Standard Arms – 13” Z5BAR13

Short Arms – 10”Z5BAR10

• Longer and extra strong arm support• Spring button locks are standard• Standard on recline modelsOrder Code: Z52PAT for CAT/ATZ52PAS for AP/SP

Arm Trough

• Soft, molded foam• Lateral/medial and fore/aft adjustment• Includes drain hole• Compatible with Pivoting Arm MountOrder Code: Z7TRL/R

Add frame width to complete order code (14”/16”/18”/20”/22”/24”/26”/28”/30”) – 18”W is standardOrder Code: 15”H – Z5S_ _

5

Anterior Posture Support BarPivoting Hand Grips

• Rotates in 90° increments and locks in either the medial or 1 of 2 vertical positionsOrder Code: Z7PHG

• Available for all chair widths• Attaches with stretchable, rubber clasp• Foam grips provide additional comfort• Widths 14”-30”Order Codes: Z7APS_ _Add width to complete code

Pivoting Arm Mount

Flat Arm Pads

• Available for both regular and short arms • Lateral/medial and fore/aft adjustment• Compatible with Pivoting Arm MountOrder Codes: • Long Pad – Z7FLL/R (14” long x 3.25” wide)• Short Pad – Z7FSL/R (10” long x 3” wide)

• Allows Arm Trough or Flat Arm Pad to be rotated 95°, permitting the arms to be flipped up without interference.• Allows low-mounted lateral pads (below top of Arm Trough) to be swung away• Arm Trough / Flat Arm Pad can be adjusted medially and angled inward for optimal arm positioning/support. Order Code: Z7PAML/R

Armrest Lock Kit Armrest Spacer Kit

• Provides additional width between armrestsOrder Codes: Z718 – 1” increase in width Z719 – 2” increase in width

• Locks arm in down position to assist with transfers and improve user stability• Releases easily with forearm• Standard on Adjusta-Back (USA only)Order Code: Z710

Arm Supports ... cont’d

6

Foot and Leg Supports

Standard Footrests

Note: Adjustment ranges are measured from top of Molded Seat to footplate

MFX12

V-Style

Footrest Extension Tubes MFX8

Flip-Back Footrest

Angle / Depth Adjustable Footplates

• 90° foot placement • Center-mount footplate improves maneuverability • 16”-20.5” adjustment range• Tilt model includes calf padsOrder Codes:Z7FBT for AT/CAT Z7FBAS for AP/SP

• Increases footrest adjustment range by 2” (18”-22.5”) • Fits Standard Footrests Order Code: Z7FET2

• 8”-12” adjustment rangeOrder Code: Z7MFX8

• To accommodate plantar / dorsiflexion and fore / aft foot positioningOrder Code: Z7ADM

• Tapered design reduces footprint for improved maneuverability• 16”-20.5” adjustment range• Angle / depth adjustable• Easily removable – bayonet mount prevents bindingOrder Code: Z7VS

• Swing-away• Removable • 16”-20.5” adjustment rangeOrder Code: Z705N

• 12-16” adjustment range• Standard on Raz-CATOrder Code: Z7MFX12

Z7FBAS Z7FBASFlipped Back

Z7FBT

7

Foot and Leg Supports ... cont’d

Residual Lower Limb Support

• Full elevation, level with seat surface• High pivot joint virtually eliminates shearing • Padded pivot joint• Depth / Angle Adjustable Footplate• Recessed, contoured calf pad• Available in Standard, and in Forward Offset configurations for seats that overhang front edge of frame:

Custom supports can be constructed in unilateral or bilateral configurations, with fixed or position / angle adjustment.

The Universal is a one-size-fits-all uniltaeral option that utilizes the contoured calf pad from our Elevating Legrest. This support offers the following adjustments: 14° of angle, 5” fore/aft, 3” vertical

• Easily snaps on and off• Available for all frame widthsOrder Codes: Z7CS_ _ (16”, 18”, 20”, 22”, 24”, 26”, 28”, 30”)

Elevating Legrests

Snap-On BodypointAeromesh Calf Strap H-Strap

• Hook and loop fastener• 2 sizes (for 18”W and 22”W frames)Order Codes: Z706 for 18”-20”W frames Z712 for 22”-24”W frames

Forward OffsetZ7ELROFL/R

UniversalZ7RLSL/R

Custom Bilateral Adjustable Angle

Custom UnilateralFixed-Angle

StandardZ7ELRL/R

8

Foot and Leg Support Accessories

Casters and Wheels

Adjustable Heel LoopsLateral / Medial Offset Footrest Receiver

• Positions foot and leg supports 2” laterally or mediallyOrder Code: Z7OFR

• Adjustable-length accomodates fore/aft foot positioning• Removable for cleaningOrder Code: Z708ADJ

• Provides soft, warm surface • Available for all footplate models Order Codes: · Standard Footplates – Z7NCS · Narrow Molded Footplates – Z7NC16 · Angle/Depth Adjustable Footplates – Z7NCA · ABS Angle/Depth Adjustable Footplates – Z7NCABS · Covers for V-Style and Flip-Back Footplates by special order

• Locks footrest to frame, but still allows swingaway function • Available for all footplate models Order Codes: Z7FSLK

Neoprene Footplate Covers

Foot Support Lock

• Ergonomic handrim• Sealed precision bearingsOrder Codes:Z612R – 22” for Raz-SP Z614R – 24” for Raz-SPZ614RHD – 24” for Raz-SP600

• Dual-locking design locks both swivel and roll • 5” standard on all chairs – 6” standard on Raz-AT600• 4” and 6” upgrades are optional on other models

Casters 22” and 24” Wheels

9

• Allows for easy removal of wheels• Large button cap for ease of activationOrder Code: Z660 for Raz-SP

• Vinyl coating improves user grip • Projections allow propulsion with palm of hand

Specialty Handrims Quick-Release Axles

User-Actuated Caster Swivel LocksThese caster swivel locks prevent both front casters from swivelling, making self-propel chairs more stable for independent lateral transfers.

The handles extend up to the seat level, making it easier for the client to activate independently.Order Code: Z674

Vinyl-Coated22”: Z612R24”: Z614R

Vinyl-Coated with Vertical Projections

22”: Z622PHR24”: Z624PHR

Casters and Wheel Accessories

Directional Caster Locks can be used on Attendant Propel models. The DCL facilitates steering by locking one rear caster in the forward position without locking the roll function.

Order Codes: Z675 for AT/CAT/AT600 Z673 for AP Z673HD for AP600

For AP/AP600 For AT/CAT/AT600

Directional Caster Locks (DCL)

10

• Locks in forward and rearward position• Fore/aft, height, and angle-adjustable• L-shaped bracket allows pad to be mounted with up to 3” medial offset from the back post

Positioning Supports

Swing-Away Lateral Thoracic Supports

Hip Adductors

Leg Adductors

• Removable• Medial / lateral adjustment• Height adjustable • Fore / aft adjustment on AT / CAT / AT600

• Removable• Medial / lateral adjustment• Fore / aft adjustment

Large Pad 6.75” x 4.3”

Small Pad 5.5” x 3.5”

Raz positioning pads are used for Swing-Away Lateral Thoracic Supports, Leg Adductors and Hip Adductors. They are adjustable and can be contoured. 2 sizes are available.

Chair Model Large Pad Small PadAP/SP Z7LGAS2L/R Z7LGAS1L/RAP600/SP600 Z7LGAS2L/R N/AAT/CAT Z7LGT2L/R Z7LGT1L/RAT600 Z7LGT2L/R N/A

Chair Model Large Pad Small PadAP / SP AT / CAT Z7LTS2L/R Z7LTS1L/RAT600 / AP600 / SP600 Z7LTS2HDL/R N/A

Chair Model Large Pad Small PadAP / SP/ AT Z7HP2L/R Z7HP1L/RCAT 14”W backs Z7HP4C2L/R Z7HP4C1L/RCAT 16” / 18”W backs Z7HP68C2L/R Z7HP68C1L/R

11

Pelvic and Chest BeltsPelvic Belt

Chest Belt

Bodypoint Pelvic Belt

Bodypoint Chest Belt

• Aeromesh fabric with side-release buckleOrder Code: Z736P S / M / L / XL

• Aeromesh fabric with side-release buckleOrder Code: Z736C S / M / L / XL

• 2-piece belt with side-release buckle • 2” webbingOrder Code: Z735 S / M / L / XL

• 1-piece wrap-around belt with hook and loop fastenerOrder Code: Z730 S / M / L / XL

Positioning Supports ... con’t

Offset Headrest Mounting Interface Plate

• Allows headrest fixture to pivot up to 22° – providing up to 10” of lateral offset, depending on height of headrest pad.Order Code: Z7HCO

• Tool-less vertical and fore / aft adjustment of headrest fixture• Molded, contoured headrest pads• Ball and socket joint in headrest pads • Small pad standard on AT/CAT/AT600 (codes shown below images)Order Codes: (AP/SP/AP600/SP600) Z7HSASS for small head supportZ7HSASL for large head support

Head Supports

Small Pad – Z7HPS(10” x 4”)

Large Pad – Z7HPL(12” x 6”)

12

Infection-Control Belts

Anti-tippers

• 1-piece wrap-around belt with side-release buckleOrder Code:Z730IC S / M / L / XL

• 2-piece with side-release buckleOrder Code:Z735IC S / M / L / XL

Vinyl-coating completely encases weave to help prevent pathogens from being trapped on the belts.

Other

AP/AP600 SP

Bard Urine Drainage Bag Holder Dual Triggers

• Clamps onto front seat support tubes to hold Bard Urine Drainage BagOrder Code: ZBUDBH_ _(16”/18”/20”/22” 24”/26”/28”/30”)

• For tilt-only or recline-only chairs, both triggers can be positioned together on either the left or right side.Order Codes:Z5DTL/R for AT/AT600Z5DLTCL/R for CAT

Order Codes: See order forms for all Front and Rear Anti-tippers

Anti-Tippers are available for all Raz chairs. They can be mounted on either the front or the rear.

Pelvic and Chest Belts ... con’t

Infection Control Pelvic Belt Infection Control Chest Belt

13

22 Howden RoadToronto, Canada M1R 3E4

www.razdesigninc.com

Contact Infoinfo@razdesigninc.com

Canada and USA: 1-877-720-5678International: +1-416-751-5678

Raz Design Inc.