Upload
anabel-turner
View
215
Download
0
Embed Size (px)
DESCRIPTION
Camera & Voice Pod Setup Click to allow voice Step 1 Step 2 Click to allow to authorise Pause webcam last frame of video used as a still Hold down to talk Click for hands free operation Step 3 Stop camera/voice
Citation preview
Optimising your Bandwidth
Select Meeting>My Connection Speed and choose from one of the options listed.
Modem - Optimises your room use for a dialup connection.DSL - Optimises your room use for a broadband connection such as ADSL, cableLAN - Select this is you are on a corporate network, like @ TAFE
Optimising your Audio
Step 1
Select the Meeting>Audio Setup Wizard menu
Step 2
Follow the wizard instructions
Install the flash enhancement if requested
Camera & Voice Pod Setup
Click to allow voice
Step 1 Step 2
Click to allow to authorise
Pause webcamlast frame of video used as a still
Hold down to talk
Click for hands free operation
Step 3
Stop camera/voice
Tips for using audio/video
When you first enable the voice/camera pod your mic is turned on, unless you are talking switch it off by clicking the talk icon, it will turn light grey.
If you are using a webcam, conserve bandwidth by pausing the video stream. Click the video icon, a still will be used in place of the video, click it again to resume video.
Unless you are talking turn off your mic. Your name will have a grey or green microphone icon next to it if your mic is active. This adds noise to the room so turn if off until you need to speak.