Upload
letuyen
View
304
Download
4
Embed Size (px)
Citation preview
Operators Manual
FARVAL® CS2000 STATIONS Description & Installation Instructions
2011F r#3
Farval®series - CS2000 Central Stations
2
Features
• Dual piston pump with working pressure rating
of 3500 psi (240 bar).
• Life rating of pump more than 2 million cycles
at 3500 psi.
• Steel reservoir supplied with visual indicator
and low level warning switch standard.
• Simplified construction - internal porting elim-
inated tubing and fittings.
• Air bleed in reservoirs to eliminate air pock-
ets.
• Adjustable relief valve - readily accessible on
the outside.
• Functional interchangeable with older stations
such as DJ10 and DJ25.
DJ2000 Pump
CS2212 Pump
Farval®series - CS2000 Central Stations
3
Table of Contents
Illustrations and specifications are not binding in detail.Designs are subject to modification and improvement without notice.
INTRODUCTIONCS2000 stations store, control and supply the lubricant to systems. Depending on reservoir size, they can be used in systems that service anything from small machine tools to large machinery in steel mills, or from small to large off road machinery such as power drills, power shovels and drag lines. A. Standard Items Standard items on these stations include a switch arrange-ment for automatic level warning systems, visual level indi-cation, an adjustable pressure relief valve and a n electri-cally driven pump. B. Options A variety of reservoir sizes, a reversing valve for DUALINE systems, and a high level warning switch are offered. C. Kits Kits are available for mounting controls and NEMA 4 appli-cations. D. General Specifications
Contents
INTRODUCTION ...............................................3
Standard Items ..............................................3
Options .............................................................3
Kits ...................................................................3
General Specifications ..................................3
DESCRIPTION .................................................4
INSTALLATION SPECIFICATIONS Small Capacity DUALINE Stations ...............5
Medium Capacity DUALINE Stations ..........6
Large Capacity DUALINE Stations ..............7
PARTS DESCRIPTION
Pump.................................................................8
Reservoir Modules .................................. 9-11
Reversing Valve ........................................... 12
Reversing Valve Conversion Loop ............ 13
Pump type Dual piston
Pump output 6.0 in3/min @ 175 strokes/min @ 1000 psi (70 bar)
Maximum operating pressure *For higher pressures, consult engineering
3500 psi * (240 bar)
Gear ratio Note: Other ratios are available at extra cost.
10:1 standard
Lubricants Oil and Grease
Reservoirs - Oil 6 Gallon Steel 15 Gallon Steel 30 Gallon Steel
Reservoirs - Grease 10 Pound Plastic 10 Pound Steel 24 Pound Steel
100 Pound Steel
Motor Note: Other motors are available at extra cost.
1/3HP, 230/440V, 3 Phase,NEMA 48 Frame
& TEFC
Reversing Valve DR45 Standard on DUALINE stations
Factory set @ 1500 psi (103 bar)
Relief Valve All Stations Factory set @ 3000 psi (206 bar)
Farval®series - CS2000 Central Stations
4
Figure 1
Part Number Reservoir Size & Material Type High Level
Warning Switch Part Number Reservoir Size & Material Type High Level
Warning Switch
CS2210 10 lb. Plastic Dualine/Grease No CS2225 24 lb. Steel Dualine/Grease Yes
CS2211 10 lb. Plastic Dualine/Grease Yes CS2206 6 gal. Steel Dualine/Oil No
CS2212 10 lb. Steel Dualine/Grease No CS2207 6 gal. Steel Dualine/Oil Yes
CS2224 24 lb. Steel Dualine/Grease No CS22101 100 lb. Steel Dualine/Grease Yes
Central Stations consist of a pump, reservoir and motor. Devices associated with particular types of systems are included with some stations. Optional equipment such as control mounts, are offered as kits. There are eight standard CS2000 Central Stations. With some basic features being made standard, this lineup should meet the needs of most applications. The eight standard units are shown in Figure 1.
Description
10 LB. STEELGREASERESERVOIR
10 LB. PLASTICGREASERESERVOIR
24 LB. STEELGREASERESERVOIR
6 GALLON STEELOILRESERVOIR
100 LB. STEELGREASERESERVOIR
FIGURE 2
II. DESCRIPTION
CS2000 Stations consist of sub-assemblies that aredesigned as modular kits. These kits may be combinedto form the variety of stations shown in Figure 1.Figure 2 illustrates how the modules are combined.
PUMP ANDBASE ASSEMBLY
DR45REVERSING VALVEMODULE
Farval®series - CS2000 Central Stations
5
Part Number Reservoir Size & Material Type High Level
Warning Switch
CS2210 10 lb. Plastic Grease No
CS2211 10 lb. Plastic Grease Yes
CS2212 10 lb. Steel Grease No
D. SMALL CAPACITY DUALINE STATIONS OUTLINE AND MOUNTING DIMENSIONS Figure 6
Installation Specifications
SEE VIEW A-A FORHIGH LEVEL SWITCH
VIEW A-A FOR HIGH LEVEL SWITCH
SEE VIEW A-A FORHIGH LEVEL SWITCH
Farval®series - CS2000 Central Stations
6
Part Number Reservoir Size & Material Type High Level
Warning Switch
CS2224 24 lb. Steel Grease No
CS2225 24 lb. Steel Grease Yes
CS2206 6 gal. Steel Oil No
CS2207 6 gal. Steel Oil Yes
E. MEDIUM CAPACITY DUALINE STATIONS OUTLINE AND MOUNTING DIMENSIONS Figure 7
Installation Specifications
SEE VIEW A-A FORHIGH LEVEL SWITCH
VIEW A-A FOR HIGH LEVEL SWITCH
SEE VIEW A-A FORHIGH LEVEL SWITCH
Farval®series - CS2000 Central Stations
7
G. LARGE CAPACITY DUALINE STATIONS OUTLINE AND MOUNTING DIMENSIONS Figure 9
Installation Specifications
Part Number Reservoir Size & Material Type High Level
Warning Switch
CS22101 100 lb. Steel Grease Yes
REVERSING VALVE
Farval®series - CS2000 Central Stations
8
A. PUMP CS2000 stations have dual piston pumps.
The two pistons are driven by eccentrics,
a worm gear, and an electric motor.
The drive shaft rotation must be in the
direction of the arrow shown by item
51 of Figure 9. All station assemblies
include one-way couplings to prevent
damage to the pump.
The crankcase of the pump should be
filled with a 140SAE grade gear oil.
Parts Description - Pump
DJ2000 PUMP
No. Req'd
Item No.
DescriptionPart
NumberNo.
Req'dItem No.
DescriptionPart
Number1 1 MAIN SPRING 200870 2 25 COTTER PIN U201A4
2 2 BEARING, SINGLE ROW AF1001 4 26 HEX HD BOLT U204A3
1 3 BEARING CONE, SINGLE ROW AF10041 4 27 HEX HD BOLT U204B5
1 4 PLUG, MAIN PISTON BORE PLU10758B 3 28 HEX HD BOLT U204C12
1 5 BEARING CONE AF10141 4 29 LOCK WASHER U213E
2 6 WRIST PIN DC2512 4 30 LOCK WASHER U213F
2 7 ECCENTRIC DJ1010101 3 31 COPPER WASHER U1305F
2 8 CONNECTING ROD DJ1010111 2 32 3/8" BALL U230E
1 9 PUMP HOUSING HSG10737D 2 33 WOODRUFF 505 U233E
1 10 SPUR GEAR, DJ2000 PUMP GEA10724B 2 34 5/8-18 RETAINER SCREW, SLOTTED U1204G
1 11 WORM GEAR, DJ2000 WOR10723B 1 35 1/4 X 15/16 L STRAIGHT KEY U1215C6
1 12 SHIM, PUMP CYLINDER SHM10726B 1 36 SPRING U1304J
1 13 PISTON AND CYLINDER ASSEMBLY LB10546 1 37 COPPER WASHER U1305L
1 14 PLATE, OPEN END WORM PLA10739B 1 38 CLOSURE PLUG U1501J
1 15 PLATE CLAMPING GEAR, MACHINED PLA10720B 1 39 SHAFT SEAL, .375 OIL U1738B
1 16 FLAT POINT SET SCREW U250G8 1 40 O-RING BUNA U1720009
1 17 SHAFT - GEAR AND ECCENTRIC SHA10735B 1 41 NAMEPLATE, ARROW U1312BL
1 18 GEAR SPACER SPA10718A 1 42 NAMEPLATE, ALUMINUM U1312C
1 19 TAG, LUBRICANT FILL NOTE(NOT SHOWN) TAG11750A 1 43 CHECK VALVE ASSEMBLY, 1/8 NPT B4942
1 20 ELBOW, 1/4 MPT X 3/8 FPT U1023 1 44 NAMEPLATE, SHAFT ROTATION U1312W
3 21 1/4-18 NPTF PLUG, PLATED U119BC 1 45 SPRING RETAINER RET10925B
1 22 3/8-18 NPTF, PLUG PLATED U119CC 1 46 BEARING CUP, SINGLE ROW AF10042
3 23 1/8-27 NPTF PLUG U1351 1 47 BEARING CUP AF10142
1 24 COPPER WASHER, U1305AB 2 48 COPPER WASHER U1305E
15
264 PL
294 PL
44
23
23
42
51
35
6 2 PL
7
810
12
17
18
24
25 2 PL
33 2 PL7
10
43
4746
SECTION B-B
21
21
37
38
23AA
B
B
1
9
13
14
16
27 4 PL
32
45
30 4 PL
48
48
NOTE 2
SET RELIEF AT 3000+/-100 PSI. THIS IS APPROXIMATELY 1.5 TURNS OF SCREW ADJUSTMENT WHEN SPRING COMPRESSION STARTS.
NOTE 2FIGURE 9
SECTION A-A
2 2
11
39
NOTE: STANDARD COUPLINGS:U109011 ONE WAY CLUTCH (MOTOR)U968B FLEX COUPLING (PUMP)UX968 SPIDER ONLY
FILLER CONNECTION(SEE FIGURE 10)
DRIVESHAFTROTATION
C
C
4
20
22
21 28 3 PL
32
342X
36
41
31 3 PL
SECTION C-C
40
Farval®series - CS2000 Central Stations
9
Parts Description - ReservoirsT2002 - 10 LB. GREASE - STEEL
No. Req'd
Item No.
DescriptionPart
Number1 1 Kit - Switch & Indicator (Low-Level) LB105781 2 Follower Assembly LB105831 3 Body - Reservoir (Steel) BOD10905B1 4 Spring - Reservoir SPR11114B1 5 Cover - Reservoir COV10796C3 6 Rod - Tie ROD10797B1 7 Retainer - Rod RET10799B3 8 Washer - Lock - 5/16" U213F3 9 Nut - Hex - 5/16" U219B1 10 Plug - Hole 7/8" PLU11106A1 11 Filler Screen Assembly T30S10151A1 12 Nipple - Pipe - 1/4" x 2" U101B51 13 Bushing - Reducing - 1/4" - 3/8" U104C21 14 Coupling - Pipe - Straight - 1/4" U112B1 15 Plug - Quick Disconnect - 1/4" MP U421BC1 16 Coupling - Quick Disconnect - 3/8" FP U422C1 17 Elbow - Steel Street - 1/4" U1104B1 18 Washer - Copper - 1" I.D. U1305AA1 19 Nameplate - Farval U1312BT1 20 Gasket GAS10873B2 21 Nameplate - Hazard Warning U1312R1 22 Nameplate - Model U1312C3 23 Washer - Flat - 5/16" U241C
T2000 - 10 LB. GREASE - PLASTICNo.
Req'dItem No.
DescriptionPart
Number1 1 Kit - Switch & Indicator (Low-Level) LB105781 2 Follower Assembly LB105821 3 Body - Reservoir (Plastic) BOD10793B1 4 Spring - Reservoir SPR11114B1 5 Cover - Reservoir COV10796C3 6 Rod - Tie ROD10797B1 7 Plug - Closure U1522H3 8 Washer - Lock - 5/16" U213F3 9 Nut - Hex - 5/16" U219B1 10 Plug - Hole 7/8" PLU11106A1 11 Filler Screen Assembly T30S10151A1 12 Nipple - Pipe - 1/4" x 2" U101B51 13 Bushing - Reducing - 1/4" - 3/8" U104C21 14 Coupling - Pipe - Straight - 1/4" U112B1 15 Plug - Quick Disconnect - 1/4" MP U421BC1 16 Coupling - Quick Disconnect - 3/8" FP U422C1 17 Elbow - Steel Street - 1/4" U1104B1 18 Washer - Copper - 1" I.D. U1305AA1 19 Nameplate - Farval U1312BT1 20 Gasket GAS10873B2 21 Nameplate - Hazard Warning U1312R1 22 Nameplate - Model U1312C3 23 Washer - Flat - 5/16" U241C
BB
22
21
10
16
15
14
12
13 111817
7
8
19
20
4
3
6
5
23
9
2
1
21
FIGURE 10
FILLER CONNECTION(SEE FUIGURE 9 FOR LOCATION)
BB
22
21
10
16
15
14
12
13 111817
7
8
19
20
4
3
6
5
23
9
2
1
21
FIGURE 12
Farval®series - CS2000 Central Stations
10
Parts Description - Reservoirs
T2005 - 24 LB. GREASE - STEELNo.
Req'dItem No.
DescriptionPart
Number1 1 Retainer - Follower Rod RET10929B1 2 Kit Switch & Indicator Res. Level LB105781 3 Follower Assembly LB106091 4 Cover - Reservoir COV10839C4 5 Rod - Tie ROD10840B1 6 Spring - Reservoir SPR10841B1 7 Body - Reservoir BOD10842B4 8 Washer - Lock - 5/16" U213F4 9 Nut - Hex 5/16" - 18 U219B1 10 Nameplate U1312BT1 11 Plate - Base Reservoir PLA10850C1 12 Gasket GAS10843A1 13 Filler Screen Assembly T30S10151A1 14 Plug - Quick Disconnect - 3/8" FP U421CC1 15 Coupling - Quick Disconnect - 3/8" FP U422C1 16 Washer - Copper - 1" I.D. U1305AA2 17 Nameplate - Hazard Warning U1312R6 18 Screw - Soc. HD Cap. - 5/16" - 18 x 1" U225B56 19 Washer - Copper - 21/64" I.D. U1305E1 20 Gasket GAS10873B1 21 Nameplate - Model U1312C1 22 Tubing - Spring Guide TUB11128B1 23 Nut - Jam - Hex 3/4" - 16 U239J1 24 Washer - Copper U1305S
T2004 - 6 GAL. OIL - STEELNo.
Req'dItem No.
DescriptionPart
Number1 1 Retainer - Float Rod RET10799B1 2 Float Switch Assembly LB105841 3 Float Assembly LB106101 4 Body - Reservoir BOD10906B1 5 Cover - Reservoir COV10839C4 6 Rod - Tie ROD10840B4 7 Washer - Lock - 5/16" U213F4 8 Nut - Hex - 5/16" - 18 U219B1 9 Nameplate U1312BT1 10 Plate - Base Reservoir PLA10850C1 11 Gasket GAS10843A1 12 Gasket GAS10873B6 13 Screw - Soc. HD Cap. - 5/16" - 18 x 1" U225B26 14 Washer - Copper 21/64" I.D. U1305E1 15 Filler Screen Assembly T30S10151A1 16 Nipple Pipe - 1/4" x 2" U101B51 17 Bushing - Reducing - 1/4" - 3/8" U104C21 18 Coupling - Pipe Straight - 1/4" U112B1 19 Plug - Quick Disconnect - 1/4" MP U421BC1 20 Coupling - Quick Disconnect U422C1 21 Elbow - Steel Street - 1/4" U1104B1 22 Washer - Copper 1" I.D. U1305AA1 23 Nameplate - Model U1312C
AA
23
1522 17
21
16
18
19
20
SECTION A-A
5
1
8
4
10
11
2
13
14
12
3
7
6
9
AA
21
16 1513 14
17
4
1
9
11
12
2
18
19
20
6
8
5
3
22
23 24
7
Farval®series - CS2000 Central Stations
11
Parts Description - Reservoirs
AA
SECTION A-A
4
6
7
8
2
9
18
20
1117
15
5
14
21
10
3
13
12
1
24
19
23 22
24BB
SECTION B-BSCALE 1 : 1
NOTE: SOME ITEMS HAVE BEEN ROTATEDIN THE SECTION VIEW FOR CLARITY
5
T40D1C1 - 100 LB. GREASE - STEELItem No.
No. Req.
Part No. Description
T40D
1C1
RESE
RVOI
R AS
SEM
BLY
1 1 T4010051 RESERVOIR BODY, 100LB
2 1 T4010071 COVER, 100LB RES.
3 1 T4010101 FOLLOWER PLATE, MACHINED
4 1 T4010111A INDICATOR ROD
5 2 U220J HEX NUT, 1-14
6 1 U232F EYEBOLT, SHOULDERED
7 1 U127B DRAIN COCK, 1/4NPT
8 3 U204F2 HEX HD BOLT
9 1 T4010272 FOLLOWER SEAL
10 1 T4010302 BAND CLAMP
11 1 T4010241 RESERVOIR GASKET
12 1 U1025 STREET ELBOW 3/4 NPT X 3/4 NPT
13 1 U101E18 PIPE NIPPLE, 3/4 X 6
18 8 U204E7 HEX HD BOLT
20 8 U213J 1/2 LOCK WASHER
21 8 U219E 1/2-13 HEX NUT
22 2 U213E 1/4 LOCK WASHER
23 2 U204A2 HEX HD BOLT
T40D
1A21
RESE
RVOI
R AD
APTE
R AS
SEM
BLY
14 1 T4010061 RES.ADPT 100LB & 200LB
15 2 T4010141 CLOSED END COVER
17 8 U204B10 HEX HD BOLT
19 8 U213F LOCK WASHER
24 1 T4010202 HI-LO LEVEL SWITCH ASSY
Farval®series - CS2000 Central Stations
12
C. REVERSING VALVE MODULE (MODULE KIT DR45K)
Parts Description Reversing Valve
SWITCH ~ S.P.D.T.
CONDUIT CONNECTION1/2” N.P.S.M.
TORQUE TO BE 150+/-10 LB./IN. PRESSURE GAUGE 0-5000 P.S.I. (2 PLACES)
3/8” N.P.S.F.(2 PLACES)
OPTIONAL RETURN1/4” N.P.S.F. PLUGGED(2 PLACES)
FIGURE 17
RETURN LINES ~ 3/8” N.P.S.F. PLUGGED
RELIEF ~ 1/2”N.P.S.F.(PLUGGED) REF.
5.75”(3.5”)
REAR VIEW
SUPPLY1/4”N.P.S.F.
ALTERNATERELIEF1/8”N.P.S.F.
4.3”
3.12”
0.69”
3.0”
3.40” MAX.3.12” MIN.
0.62”
NON-RETURN SYSTEMARRANGEMENT #1STANDARD FROM FACTORY
LOOP SYSTEMARRANGEMENT #2
NO. 1 RETURN LINE1/4” N.P.T
NO. 2 RETURN LINE1/4” N.P.T
2.31”2.19”
1.50” 1.62”
2.19”2.31”
1
1b1a
1c
9
8
6
5
2
4
3
ARRANGEMENT #3
NO. 1 RETURN LINE1/4” N.P.T
NO. 2 RETURN LINE1/4” N.P.T
4
No. Required Arrangements Item
# Description Part Number#3 #2 #11 1 1 1 Switch and Adapter Assembly FT15801C8
1a Switch U10623
1b Switch Adapter 37041
1c Set Screw 37037
2 2 Bushing - Face - 3/8" x 1/4" P. U148C2
2 3 Elbow - Street - 1/4" P. Brass U152B
2 2 4 Tee - Street - 1/4" P. U156B
2 5 Elbow - Street - 1/4" P. 45 Deg. U1103B
1 1 1 6 Nameplate - Model U1312C
1 1 1 7 Nameplate-PR-Set(not shown) NAM10431A
1 1 1 8 Reversing Valve Assembly DR4-5
2 2 2 9 Gauge-Pressure 0-5,000 P.S.I. U902F
Farval®series - CS2000 Central Stations
13
Reversing Valve Loop Conversion
INSTALL 1/8”PIPE PLUGFOR LOOPSYSTEM.(TWO PLACES)
FIGURE 18
INSTALL 1/8”PIPE PLUGFOR LOOPSYSTEM.
RETURN LINE #2
RETURN LINE #1
RELIEFLINE
SUPPLYLINE
OPTIONALRELIEF
BOTTOM VIEW REAR VIEW
FRONTVIEW
CONVERSION OF DR45 REVERSING VALVE TO LOOP SYSTEM Valves are shipped for non-return systems, without the 1/8" pipe plug installed. All that is required to make the discharge connec-tions on the front face of the valve. For loop systems, install the 1/8" pipe plugs as shown and make the return connections to either the return ports on the front face, or the two return ports located on the bot-tom of the valve.
Farval®series - CS2000 Central Stations
14
Notes
Farval®series - CS2000 Central Stations
15
Notes
WWW.BIJURDELIMON.COM © 2016 BIJUR DELIMON INTERNATIONAL. ALL RIGHTS RESERVED. 2011F • R3 (08/17)
UNITED KINGDOM
Denco Lubrication Limited Ramsden Court Ramsden Road Rotherwas Industrial Estate Hereford, HR2 6LR
(+44) (0) 1432365000 TEL (+44) (0) 1432365001 FAX
CORPORATE HEADQUARTERS (USA)
Bijur Delimon International 2100 Gateway Centre Blvd. Suite 109 Morrisville, NC 27560
(919) 465 4448 TEL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX
SPAIN
Lubricacion Centralizada de Limon S.A. Avenida Txori Erri 3 48150 Sondica Vicaya
(+34) 94-453-2000 TEL (+34) 94-453-2500 FAX
GERMANY
Bijur Delimon International Arminstrasse 15 40227 Düsseldorf
(+49) 211 / 77 74-0 TEL (+49) 211 / 77 74-210 FAX
IRELAND
Bijur Lubricating Ireland Limited Gort Road Ennis, County Clare
(+353) 6568-21543 TEL (+353) 6568-29667 FAX
CHINA
Nanjing Bijur Machinery Products, Ltd. #9 Hengtong Road Nanjing Xingang Economic & Technical Development Zone Nanjing 210038
(+86) 25-85801188 TEL (+86) 25-85802288 FAX
INDIA
Bijur Delimon India Private Limited H-Block, A 56/1 M.I.D.C., Pimpri Pune- 411018, Maharashtra
(+91) 2032319149 TEL (+91) 2027451725 FAX
FRANCE
Bijur Products, Inc. PB 50 - ZI de Courtabœuf 9, Avenue de Quebec F-91942 Courtaboeuf Cedex
(+33) (0)169298585 TEL (+33) (0)169077627 FAX
Innovators of engineered lubrication technology since 1872
Bijur Delimon International has ISO 9001:2008 and ISO 14000 quality certified manufacturing facilities around the world, so your centralized lubrication system meets the highest industry quality standards. It’s all part of our commitment to quality and customer service.