Operation and Inspection of Cranes, Lifting and Materials Handling Equipment Information Pack

Training, Competence, ManpowerInformation Pack

Training CoursesOperation and Inspection of Cranes, Lifting and Materials Handling Equipment

Why choose JTN Technical Services?

We are committed to supplying training and consultancy that brings real value and relevance to the client, improves the skills and competence of the workforce,

reduces incidents, and is a tool with which a person can benefit throughout their career.

Our Competence Consultancy is second to none in the region and our certified OPITO Competence Assessor and Internal Verification services underpins

our belief that all organisations can benefit from an enhanced focus on competence no matter what their prior experience.

We are honest and loyal to all those that engage with us. Our integrity, adherence to standards and the pursuit of competence means that clients have trusted and engaged

our services over a period of many years.

ACCREDITATION

QUALITY CERTIFICATION

What We Do

Training

We provide high quality training at your site or ours anywhere in the world. We deliver to your specification and through a broad range of internationally recognised accrediting bodies with instructors who are experts in their field.

Skills Training

• Competence Assessor and Internal Verifier Training

• Crane Operation and Inspection

• Lifting and Materials Handling Equipment Operation and Inspection

• Health and Safety training

• Environment Training

• Logistics Training

• Scaffolding Training

• First Aid

• Defensive Driving

Technical Training

• Instrumentation

• Mechanical

• Process

• Electrical

Details of these courses can be found in the rear of this booklet.

Competence

Wherever you are located, we provide a start to finish service for your organization; providing all the advice, documentation, system design, manpower and training you need for your Competence Assurance Programme. Whether a new Competence Management System (CMS) is being introduced, a current one needs improvement or you just require some fresh ideas and skills to move forward we have a solution for you.

Competence Services

• CMS system design

• Implementation Management

• Provision of qualified discipline assessors

• Provision of qualified Internal Verifiers

• CMS audits

• Skills gap analysis

• CMS Induction programme

• Assessor and Verifier training

• Helping you to achieve OPITO CMS approval

3WHAT WE DO

WHAT WE DO4

What We Do

Manpower

Wherever you are, we have people with the skills to support you. Whether you need an expert to undertake a part of your scope, a trainer to deliver your courses, an inspector for your equipment or a mentor or on-the-job trainer for your staff we have the correct support available.

For more information please get in touch at [email protected]

People

• Discipline Assessors and Trainers

• Process

• Instrument

• Mechanical

• Electrical

• OPITO Stage 3 Crane Operators

• OPITO Stage 3 Riggers

• OPITO Stage 4 Banksmen

• OPITO LOLER Competent People

• API RP 2D Riggers

• API RP 2D Offshore Crane Operators

• API RP 2D and Spec 2C Offshore Pedestal Crane Inspectors

• API Loose Lifting Equipment Inspectors

Services

• Inspection (Cranes and Hoists, Slings and Loose Lifting Gear, Lifting Devices and Heavy Equipment)

• Crane Maintenance and Overhaul services

Our manpower service can usually be deployed anywhere in the world within 48 hours.

Clients

Where We’ve Worked

As of August 2015

5WHERE WE’VE WORKED & CLIENTS

A B

D

C

E

G

H

F

I

Role Specific Training Materials Handling Training

Planning Roles

A Lifting Authority/Competent Person

The Lifting Authority carries out risk assessments, delivers toolbox talks, compiles lift plans and inspects lifting equipment and accessories

Course(s):

• API Lifting Authority (Competent Person) Training (page 16)

• API Lifting Authority (Competent Person) Assessment (page 17)

ROLE SPECIFIC TRAINING6

Maintainance/ Inspection Roles

F

G

Lifting Authority/Competent Person

A Loose Lifting Equipment Inspector is a person able to identify and inspect various lifting and rigging hardware to visually check they are fit for purpose and safe for use.

Course(s):

• Loose Lifting Equipment Inspection (page 17)

Rigging Loft Controller

A Rigging Loft Controller ensures the logging, safe keeping and quaranting of Lifting Equipment

Course(s):

• Rigging Loft Management (page 24)

H

I

CCU Inspector

A Cargo Carrying Unit (CCU) Inspector is responsible for conducting

Visual testing and examination of CCU.

Course(s):

• Cargo Carrying Unit (CCU) Transit Inspection (page 25)

• Loose Lifting Equipment Inspection (page 17)

Crane Inspector

A Crane Inspector would be expected to perform inspections in line with API RP 2D and Spec 2C

Course(s):

• API RP 2D Offshore Pedestal Crane Inspection (Friction Type) (page 15)

• API RP 2D Offshore Pedestal Crane Inspection (Hydraulic/ Electric Type) (page 21)

• API Mobile Crane Inspection (page 19)

Operational Roles

B

C

D

Slinger

A Slinger is able to utilise slings effectively to secure cargo and make it safe for lifting

Rigger

A Rigger attaches or detaches loads or loose gear to lifting devices and interprets approved lift plans

Banksman

A Banksman reviews and checks the load and the balance of the load and controls the lift by signalling/communicating. They do not touch the load.

Course(s):

• API RP 2D Rigger/ Slinger/ Banksman (page 11)

• Hoisting and Rigging Awareness (page 20)

E Crane Operator

A crane operator is trained for the specific type of crane they are expected to use.

Course(s):

• API RP 2D Offshore Pedestal Crane Operator (page 10)

• API Mobile Crane Operator (page 12)

• Tower Crane Operator (page 22)

• Pendant Controlled Gantry Crane Operator (page 21)

• Rough Terrain Crane Operator (page 23)

7ROLE SPECIFIC TRAINING

Materials Handling CoursesCODE TITLE PAGE

CLMHE001 API RP 2D Offshore Pedestal Crane Operator 10

CLMHE002 API RP 2D Rigger/ Slinger/ Banksman 11

CLMHE014 API Mobile Crane Operator 12

CLMHE017 Lifting Authority (Competent Person) Training 13

CLMHE020 Lifting Authority (Competent Person) Assessment 14

CLMHEI001 API Spec 2C & RP 2D Offshore Pedestal Crane Inspection (Friction Type) 15

CLMHEI002 API Mobile Crane Inspection 16

CLMHEI003 Loose Lifting Equipment Inspection 17

CLMHEI009 API Spec 2C & RP 2D Offshore Pedestal Crane Inspection (Hydraulic/ Electric Type) 18

CLMHE004 Forklift Truck Operator Training 19

CLMHE005 Hoisting and Rigging Awareness 20

CLMHE011 Pendant Controlled Gantry Crane Operator 21

CLMHE015 Tower Crane Operator 22

CLMHE016 Rough Terrain Crane Operator 23

CLMHE019 Rigging Loft Management 24

CLMHEI007 Cargo Carrying Unit (CCU) Transit Inspection 25

AVAILABLE INTERNATIONAL ACCREDITATION

API certification is the most desirable and trusted credential in the petrochemical industry. Obtaining API certification increases your marketability and earning potential and makes you a highly regarded professional in the field.

api.jtn.me

API ACCREDITED

SHELL COMPLIANCE

API RP 2D - Offshore Pedestal Crane Operator

AIM & OBJECTIVES

The aim of this module is to establish that the delegate has the required underpin-ning knowledge, understanding and practical skills to fulfil the role of API Offshore Pedestal Crane Operator safely & effectively.

The objectives of this module is to highlight that the dangers of crane operations in the offshore environment cannot be overemphasized. Delegates that attend this course will leave with a more thorough understanding of the critical elements of lifting and moving loads and personnel safely in an offshore environment.

This module follows API – RP – 2D 7th Edition Requirements.

CERTIFICATION

Delegates successfully meeting the API Offshore Pedestal Crane Operator assess-ment requirements will be issued with an API Offshore Pedestal Crane Operator certificate for the crane(s) on which they have been trained and assessed. Certifi-cate is valid for four years.

The successful delegate shall also be qualified to perform crane inspections, with the exception of the initial, quarterly and annual inspection.

Successful delegates will also be issued with a wallet card.

Where a delegate DOES NOT MEET the required assessment outcomes, no certifi-cate will be awarded and the delegate must retake the API Offshore Pedestal Crane Operator assessment.

PREREQUISITE

01. Delegates must be qualified as an API Rigger/Slinger/Banksman or Level 3 Rigger.

02. Delegates must meet the following physical qualifications:

• Have vision of at least 20/30 Snellen in one eye and 20/50 in the other with or without correction, and have depth perception as demonstrated by record of a recognized test administered by an authorized medical person.

• Be able to distinguish red, green and yellow regardless of position of colours.

• Have hearing, with or without hearing aid, adequate for the specific oper-ation.

03. Delegates must select which of the following two crane types and/or sub-types they require qualification for:

• Operation of Mechanical (Friction Type)

• Operation of Non - Mechanical

• Hydraulic

• Electric

04. For this course all delegates are required to provide their own protective cloth-ing (ie) hardhat, safety boots, safety glasses & coveralls etc.

Who Should Attend?

Personnel who are responsible for the safe operations of offshore pedestal cranes.

Location

Training/ Assessment will be conducted at delegate’s normal offshore place of work or an alternative suitable training/ assessment location.

Duration

5 days

Participants

Maximum of 8

Accreditation

In Compliance With

Schedule

4 - 8 April 2016

25 - 29 August 2016

Course Code

CLMHE 001

MATERIALS HANDLING COURSES10

API RP 2D - Rigger/ Slinger/ Banksman

AIM & OBJECTIVES

This module is designed for all rigging and lifting personnel who require to demon-strate a competence in the Rigger/ Banksman/ Slinger role. The recommended practices identify the basic competencies and safety training required by the Offshore/Onshore Oil & Gas Industry for personnel involved in rigging and lifting operations.

This module follows API – RP – 2D 7th Edition Requirements.

CERTIFICATION

Delegates successfully meeting the API Rigger/Slinger/Banksman Assessment requirements will be issued with an API Rigger/Slinger/Banksman Certificate of Competence which is valid for 4 years.


Where a delegate DOES NOT MEET the required assessment outcomes, no certif-icate will be awarded and the delegate must retake the API Rigger/Slinger/Banks-man Assessment.

PREREQUISITE

• Attendees will verify compliance with JTN Medical Screening Form

• For this course all delegates are required to provide their own protective cloth-ing (ie) hardhat, safety boots, safety glasses & coveralls etc.

Who Should Attend?

Personnel who supervise or are directly involved in rigging and lifting operations, including crane lifting. The module could also be beneficial to persons with a responsibility for the issue and control of lifting equipment and accessories.

Location

JTN Training Centre, Labuan or client’s premises if suitable facilities are available.

Duration

3 days

Participants

Maximum of 8

Accreditation

In Compliance With

Course Code

CLMHE 002

Schedule

14 - 16 January 201617 - 19 February 201625 - 27 February 201610 - 12 March 201629 - 31 March 201614 - 16 April 201618 - 20 April 201618- 20 May 201626 - 28 May 20169 - 11 June 201628 - 30 June 201611 - 13 July 201621 - 23 July 2016

4 - 6 August 201622 - 24 August 20168 - 10 September 201613 - 15 September 20164 - 6 October 201613 - 15 October 201614 - 16 November 201624 - 26 November 20168 - 10 December 201619 - 21 December 2016

11MATERIALS HANDLING COURSES

Mobile Crane Operator

AIM & OBJECTIVES

This aim of this module is to confirm attendees are competent to ensure the safety & reliability of a mobile crane in compliance with statutory requirements.

This module incorporates API - RP - 2D 7th Edition Requirements.

CERTIFICATION

Delegates successfully meeting the Mobile Crane Assessment requirements will be awarded an API Mobile Crane Operator Certificate which is valid for 4 years.

PREREQUISITE

• Valid API Rigger/Slinger/Banksman or equivalent



Who Should Attend?

Personnel who are required to operate mobile cranes for lifting operations

Location

Training will conducted at delegate’s normal place of work or an alternative suitable training/ assessment location.

Duration

4 days

Participants

Maximum of 8

Accreditation

Schedule

14 - 17 January 20166 - 9 May 201622 - 25 September 20164 - 7 November 2016

Course Code

CLMHE 014


Lifting Authority (Competent Person) Training

AIM & OBJECTIVES

This aim of this module is to give the attendees an understanding of the Lifting Au-thority’s responsibilities and how to fulfill them. This will enable them to direct and supervise a safe lifting operation in accordance with Safe Systems of Work.

This module incorporates RP - 2D 7th Edition requirements

CERTIFICATION

Attendees successfully meeting the API Lifting Authority Training requirements will be awarded an API Lifting Authority Training certificate which has no expiry.

PREREQUISITE

• Attendees must have successfully completed API - RP - 2D Rigger/Slinger/Banksman course or recognized equivalent.



Who Should Attend?

Personnel who have lifting operations experience.

Location


Duration

4 days

Participants

Maximum of 8

Accreditation

Schedule

14 - 17 March 201625 - 28 April 201615 - 18 August 201617 - 20 October 2016

Course Code

CLMHE 017


Lifting Authority (Competent Person) Assessment

AIM & OBJECTIVES

This aim of this assessment is to evaluate the competence of a company spon-sored applicant who has been recommended to take on the role of Lifting Authority (LA).

This module incorporates RP-2D 7th Edition requirements.

CERTIFICATION

Applicant successfully meeting the API Lifting Authority assessment requirements will be awarded an API Lifting Authority Certificate which has no expiry, provided the person is continuously working in this position.

If a person has not worked in this position for a period of two years he/she must once again be put forward by his employing company for assessment.

APPLICANT PRIOR ACHIEVEMENT

It is the responsibility of the employer to ensure that the applicant is ready to be assessed and has:

01. Suitable and relevant experience in both crane operations & hoisting and lifting operations involving the use of portable lifting equipment.

02. Knowledge and experience of:

• API - RP - 2D, LOLER, PUWER & HASAWA requirements

• Safe Systems of Work

• Assessment of personnel

• Management of personnel

• The inspection of lifting equipment

• Safe use of lifting equipment

• Management of rigging lofts

• The planning of lifting operations

• Risk assessment

PREREQUISITE


• The LA applicant must have theoretical knowledge and operational experience to select the appropriate lifting equipment and plan how it should be used

• Determine the suitable levels of supervision for the lifting operations and be able to verify / manage the contents of the rigging loft (or equivalent).


Who Should Attend?

Acting Lifting Authorities requiring competence assessmen or as a follow up to CLMHE 017.

Location


Duration

2 days

Participants

Maximum of 4

Accreditation

Schedule

18 - 19 March 201629 - 30 April 201619 - 20 August 201621 - 22 October 2016

Course Code

CLMHE 020


API SPEC 2C & RP 2D - Offshore Pedestal Crane Inspection (Friction Type)

AIM & OBJECTIVES

The aim of this module is to confirm delegates are competent to ensure the safety and reliability of pedestal crane hoisting and lifting equipment in compliance with statutory requirements.

This module incorporates API Spec 2C & RP - 2D 7th Edition Requirements.

CERTIFICATION

Delegates successfully completing the API Offshore Pedestal Crane Inspection (Friction Type) programme will be awarded an API Offshore Pedestal Crane Inspec-tion certificate for:

• Mechanical (Friction Type) Cranes

This certificate deems the inspector qualified to perform: initial, pre-use, monthly, quarterly and annual inspections, and is valid for four (4) years.


Where a delegate DOES NOT MEET the required assessment outcomes, no certifi-cate will be awarded and the delegate must retake the API Offshore Pedestal Crane Inspection (Friction Type) assessment.

PREREQUISITE



Who Should Attend?

Personnel who wish to inspect, test and report on the condition of offshore pedestal cranes.

Location

Training / Assessment will be conducted at delegate’s normal offshore place of work or an alternative suitable training/ assessment location.

Duration

3.5 days

Participants

Maximum of 8

Accreditation

In Compliance With

Schedule

17 - 20 January 201612 - 15 December 2016

Course Code

CLMHEI 001


API - Mobile Crane Inspection

AIM & OBJECTIVES

The aim of this module is to confirm delegates are competent to ensure the safety and reliability of mobile crane hoisting and lifting equipment in compliance with statutory requirements.


CERTIFICATION

Delegates successfully completing the API Mobile Crane Inspection programme will be awarded an API Mobile Crane Inspection certificate which is valid for three years.

PREREQUISITE


• For this course all delegates are required to provide their own protective

• clothing (ie) hardhat, safety boots, safety glasses & coveralls etc.

Who Should Attend?

Personnel who work around mobile cranes but lack the experience necessary to inspect. It is also intended for personnel who currently perform inspections but lack the assessment necessary to be considered competent and qualified as defined by legislation.

Location

Training will be conducted at delegate’s normal place of work or an alternative suitable training/ assessment location.

Duration

3 days

Participants

Maximum of 8

Accreditation

Schedule


Course Code

CLMHEI 002


Loose Lifting Equipment Inspection

AIM & OBJECTIVES

The aim of this module is to highlight and reinforce to the delegates the importance of inspection and maintenance of lifting equipment to ensure it remains safe for use.


CERTIFICATION

Delegates successfully meeting the API Loose Lifting Equipment Inspection as-sessment requirements will be awarded an API Loose Lifting Equipment Inspection certificate which is valid for four years.

PREREQUISITE


• For this course all delegates are required to provide their own protective cloth-ing (ie) hardhat, safety boots, safety glasses & coveralls etc

Who Should Attend?

Personnel who are involved with the inspection and use of lifting equipment.

Location


Duration

3 days

Participants

Maximum of 12

Accreditation

Schedule

11 - 13 January 201622 - 24 February 20167 - 9 March 201611 - 13 April 201623 - 25 May 20166 - 8 June 201618 - 20 July 20161 - 3 August 20165 - 7 September 201610 - 12 October 201621 - 23 November 20165 - 7 December 2016

Course Code

CLMHEI 003


API SPEC 2C & RP 2D - Offshore Pedestal Crane Inspection (Hydraulic/ Electric Type)

AIM & OBJECTIVES

The aim of this module is to confirm delegates are competent to ensure the safety and reliability of pedestal crane hoisting and lifting equipment in compliance with statutory requirements.

This module incorporates API Spec 2C & RP - 2D 7th Edition Requirements.

CERTIFICATION

Delegates successfully completing the API Offshore Pedestal Crane Inspection (Hy-draulic/Electric Type) programme will be awarded an API Offshore Pedestal Crane Inspection certificate for

• Non-mechanical (Hydraulic, Electric) Cranes

This certificate deems the inspector qualified to perform: initial, pre-use, monthly, quarterly and annual inspections, and is valid for four (4) years.


Where a delegate DOES NOT MEET the required assessment outcomes, no certifi-cate will be awarded and the delegate must retake the API Offshore Pedestal Crane Inspection (Hydraulic/Electric Type) assessment.

PREREQUISITE



Who Should Attend?

Personnel who wish to inspect, test and report on the condition of offshore pedestal cranes.

Location

Training / Assessment will be con-ducted at delegate’s normal offshore place of work or an alternative suit-able training / assessment location.

Duration

3.5 days

Participants

Maximum of 8

Accreditation

In Compliance With

Schedule

2 - 5 February 20168 - 11 August 2016

Course Code

CLMHE 008


Forklift Truck Operator

AIM & OBJECTIVES

The aim of this module is to impart to the attendees, the necessary knowledge and skills required of a fork lift truck operator.

CERTIFICATION

Delegates successfully meeting the API Forklift Truck Operator assessment require-ments will be awarded an API Forklift Truck Operator certificate which is valid for three years.

PREREQUISITE

• Attendees will verify compliance with JTN Medical Screening Form.


Who Should Attend?

Personnel who are required to operate fork lift trucks.

Location


Duration

3 days

Participants

Maximum of 8

Accreditation

Schedule


Course Code

CLMHE 004


Hoisting & Rigging Awareness

AIM & OBJECTIVES

The aim of this module is to provide delegates, from different job roles, with an introductory knowledge of rigging and lifting operations.

CERTIFICATION

Delegates successfully meeting the Hoisting & Rigging Awareness assessment requirements will be awarded Hoisting & Rigging Awareness certificate which has no validity.

PREREQUISITE



Who Should Attend?

Personnel who have had little or no training and experience in rigging and lifting operations.

Location


Duration

2 days

Participants

Maximum of 12

Accreditation

Schedule

15 - 16 June 201628 - 29 November 2016

Course Code

CLMHE 005


Pendant Controlled Gantry Crane Operator

AIM & OBJECTIVES

The aim of this module is to impart to the delegates the necessary knowledge & skills required of a Pendant Controlled Gantry Crane Operator.

CERTIFICATION

Delegates successfully completing the Pendant Controlled Gantry Crane Operator programme will be awarded a Pendant Controlled Gantry Crane Operator certificate which is valid for 3 years.

PREREQUISITE



Who Should Attend?

All personnel operating or working with pendant controlled gantry cranes.

Location

Delegates will be trained and as-sessed at their normal place of work using the cranes they operate on a daily basis.

Duration

2 days

Participants

Maximum of 8

Accreditation

Schedule

Please contact a member of our staff at hello.jtn.me

Course Code

CLMHE 011


Tower Crane Operator

AIM & OBJECTIVES

The aim of this module is to impart to the delegates, the basic knowledge & skills required of a Tower Crane operator.

CERTIFICATION

Delegates successfully completing the Tower Crane Operator programme will be awarded a Tower Crane Operator Certificate which is valid for three years.

PREREQUISITE

• Part of the content of this course includes tower climbing. Therefore it is cru-cial that delegates are not afraid of heights to the extent that they are unable to carry out this activity.

• Attendees will verify compliance with JTN Medical Screening Form.


Who Should Attend?

Potential and existing operators who have received no formal instruction and those wishing to refresh their skills.

Location

Training/ assessment will be con-ducted at delegate’s place of work or an alternative training / assessment location.

Duration

3 days

Participants

Maximum of 8

Accreditation

Schedule


Course Code

CLMHE 015


Rough Terrain Crane Operator

AIM & OBJECTIVES

All delegates attending this module will gain significant and useful skills and will leave with a stronger understanding and appreciation of the requirements and responsibilities of Rough Terrain Mobile Crane Operators.

CERTIFICATION

Delegates successfully completing the Rough Terrain Mobile Crane Operator pro-gramme will be awarded a Rough Terrain Mobile Crane Operator Certificate which is valid for three years.

PREREQUISITE

• Valid API Rigger/Slinger/Banksman or equivalent



Who Should Attend?

Personnel who are required to oper-ate Rough Terrain mobile cranes for lifting operations.

Location


Duration

5 days

Participants

Maximum of 6

Accreditation

Schedule


Course Code

CLMHE 016


Rigging Loft Management

AIM & OBJECTIVES

The aim of this module is to provide the delegates with a better knowledge and understanding of the legal and practical requirements in running an operational rigging loft.

CERTIFICATION

Delegates successfully Delegates successfully completing the Rigging Loft Management programme will be awarded an Rigging Loft Management certificate which has no expiry.

PREREQUISITE

• A valid Rigger certificate or equivalent, and

• A valid API Loose Lifting Equipment Inspection certificate or equivalent


• For this course all delegates are required to provide their own protective cloth-ing (ie) hardhat, safety boots, safety glasses, coveralls, etc.

Who Should Attend?

Personnel responsible for the issuing and control of lifting equipment on-board an offshore installation or ashore based workplace.

Location


Duration

3 days

Participants

Maximum of 12

Accreditation

Schedule


Course Code

CLMHE 019


Cargo Carrying Unit (CCU) Transit Inspection

AIM & OBJECTIVES

The aim of this module is to provide delegates with the required skills & knowledge to inspect various cargo carrying units prior to shipment in compliance with BS EN 12079 & DNV 2.7.1, 2 & 3.

Although a theory session is presented, the emphasis of this module is practical examination.

CERTIFICATION

Delegates successfully meeting the CCU Inspection assessment requirements will be awarded a certificate of attendance which aids in addressing the various legislative requirements placed upon employers to ensure their employees are competent.

PREREQUISITE


• For this course all delegates are required to provide their own protective clothing (ie) suitable hardhat, safety boots, safety glasses & coveralls.

• Attendees must have a Slings & Lifting Set Inspection certificate.

Who Should Attend?

All personnel who are involved in cargo handling.

Location


Duration

1 day

Participants

Maximum of 10

Accreditation

Schedule


Course Code

CLMHEI 007


Other CoursesCATEGORY PAGE

Materials Handling 27

Logistics 27

Transportation 27

Health, Safety, Security and Environment 28

Competency 28

Scaffolding 28

Soft Skills 29

First Aid 29

Vocational Training - Instrumentation 29

Vocational Training - Mechanical 30

Vocational Training - Production 31

Vocational Training - Electrical 31

Materials HandlingCODE TITLE

CLMHE001 API RP 2D Offshore Pedestal Crane Operator

CLMHE002 API RP 2D Rigger Slinger Banksman

CLMHE003 Telehandler Operator Course

CLMHE004 Forklift Truck Operator Training

CLMHE005 Hoisting and Rigging Awareness

CLMHE010 Lorry Loader (HIAB)

CLMHE011 Pendant Controlled Gantry Crane Operator

CLMHE013 Mobile Elevated Work Platforms (MEWP)

CLMHE014 API Mobile Crane Operator

CLMHE015 Tower Crane Operator

CLMHE016 Rough Terrain Crane Operator

CLMHE017 Lifting Authority (Competent Person) Training

CLMHE019 Rigging Loft Management

CLMHE020 Lifting Authority (Competent Person) Assessment

CLMHE021 Excavator Operator

CLMHEI001 API Spec 2C & RP 2D Offshore Pedestal Crane Inspection (Friction Type)

CLMHEI002 API Mobile Crane Inspection Training

CLMHEI003 Loose Lifting Equipment Inspection

CLMHEI004 Overhead Crane Hoist Inspection

CLMHEI005 Wire Rope Inspection

CLMHEI006 Wire Rope Socketing

CLMHEI007 CCU Transit Inspection

CLMHEI009 API Spec 2C & RP 2D Offshore Pedestal Crane Inspection (Hydraulic/Electric Type)

CLMHEI011 Slings and Lifting Sets Inspection

LogisticsCODE TITLE

LOG001 Introduction to Logistics and Supply Chain Management

LOG002 Choosing and Developing a Multi Modal Transport Solution

TransportationCODE TITLE

TRA001 Defensive Driving

27OTHER COURSES

Health, Safety, Security and EnvironmentCODE TITLE

HSSE001 NEBOSH International General Certificate in Occupational Safety and Health

HSSE002 Manual Handling

HSSE003 Working Safely at Height

HSSE004 SWAT Hazard Identification and Implementing Controls at the Worksite

HSSE005 SWAT Risk Assessment

HSSE006 SWAT Permit to Work Awareness

HSSE007 SWAT Lock out Tag out and Test

HSSE008 SWAT Toolbox Talk Developing and Delivery

HSSE009 Developing a Safety Culture

HSSE010 Dropped Object Prevention Scheme

HSSE011 Electrical Safety Awareness

HSSE012 Explosive Atmospheres

HSSE013 HSE Management System Completion

HSSE014 Incident Investigation

HSSE015 Process Safety

HSSE016 Occupational Health and Safety Auditing

HSSE017 Managing Safety

HSSE018 Permit to Work Underpinning Knowledge

HSSE019 Certificate in Environmental Management

HSSE021 SIMOPS

HSSE022 Use of PPE

HSSE023 Health and Safety for Supervisors

HSSE024 Envionmental Awareness at Work

CompetencyCODE TITLE

OPI001 OPITO Competence Assessor

OPI002 OPITO Internal Verifier

ScaffoldingCODE TITLE

SCA001 Scaffolding Part A

SCA002 Scaffolding Part B

SCA003 Scaffolding (Complex)

SCA004 Safe Inspection of Scaffolds

SCA005 Safe Inspection of Scaffolds (Complex)

OTHER COURSES28

Soft SkillsCODE TITLE

SKI001 Train the Trainer

SKI002 Effective Communication Skills

SKI003 Internal Auditing

First AidCODE TITLE

AID001 First Aid

Vocational Training — InstrumentationCODE TITLE

IVT001 Introduction to Instrumentation

IVT002 Terminology & Symbology

IVT003 Basic Hand Tools

IVT004 Basic Electricity

IVT005 Basic Physics

IVT006 Principles of Measurement and Control

IVT007 Pressure Measurement

IVT008 Flow Measurement

IVT009 Level Measurement

IVT010 Temperature Measurement

IVT011 Instrumentation Pipe Work

IVT012 Instrumentation & Control Systems

IVT013 Analytical Measurement

IVT014 Hazardous Areas & Intrinsic Safety

IVT015 Automatic Control Theory

IVT016 Pneumatics & Pneumatic Controllers

IVT017 SMART Transmitters

IVT018 Control Valves

IVT019 Calibration

IVT020 Planned Preventive Maintenance

IVT021 Introduction to DCS

IVT022 Introduction to PLC’s

IVT023 Foundation Fieldbus/Communication

IVT024 Introduction to SCADA

IVT025 Fault Diagnosis

IVT026 Measuement and Control

29OTHER COURSES

Vocational Training — MechanicalCODE TITLE

MVT001 Occupational Health & Safety

MVT002 Basic Engineering Drawings

MVT003 Gas Turbines

MVT004 Pumps

MVT005 Compressors

MVT006 Internal Combustion Engines

MVT007 Lubrication and Filtration

MVT008 Valves & Actuators

MVT009 Seals Gaskets and Packing’s

MVT010 Bearings

MVT011 Mechanical and Dry Gas Seals

MVT012 Power Transmission

MVT013 Rotating Equipment Alignment

MVT014 Pipe Work and Fittings

MVT015 Heat Exchangers

MVT016 Measuring Tools & Precision Instruments

MVT017 Workshop Practice & Power Tools

MVT018 Machine Shop Practice

MVT019 P & ID’s

MVT020 Hydraulic & Pneumatic Fundamentals

MVT021 Furnaces

MVT022 Air Coolers

MVT023 Water Tube Boilers

MVT024 Diesel Engines

OTHER COURSES30

Vocational Training — ProcessCODE TITLE

PVT001 Introduction to Oil & Gas

PVT002 Basic Theory of petroleum

PVT003 Process Technician Basic Knowledge

PVT004 Operations Safety

PVT005 P & ID’s

PVT006 Wells & Manifolds

PVT007 Separation

PVT008 Oil Treatment

PVT009 Distillation

PVT010 Produced Water Systems

PVT011 Gas Dehydration

PVT012 Gas Treatment

PVT013 Gas Compression

PVT014 Refrigeration

PVT015 Storage Tanks

PVT016 Metering Systems

PVT017 Pigging Operations

Vocational Training — ElectricalCODE TITLE

EVT001 Basic Electrical Systems

EVT002 Electrical Safety

EVT003 Electric Motors & Starters

EVT004 Electrical Generation & Distribution

EVT005 Transformers

EVT006 Capacitors

EVT007 Diodes

EVT008 Semi-conductors

EVT009 Fluorescent Lights

EVT010 Uninterrupted Power Supplies

EVT011 HVAC Systems

EVT012 Earthing & Bonding Systems

EVT013 Battery Banks & Chargers

EVT014 Cathodic Protection

EVT015 HV & LV Switchgear

EVT016 Electrical Measurement

EVT017 Electrical Protection Systems & Control

EVT018 Use of Electrical Equipment in Hazardous Areas

31OTHER COURSES

If you are interested in taking this qualification, please call a member of our staff on +60 85 420 040 to discuss the programme in more detail such as assessment criteria, timelines, payment structure etc.

Alternatively, contact us online by visiting jtntechnicalservices.com/contact or email [email protected] and one of our advisors will get back to you by phone or email.

Online version of this overview at api.jtn.me

Documents

Operation and Inspection of Cranes, Lifting and Materials Handling Equipment Information Pack