OpenVPN Setup Guide for iPad/iPhone

1. Go to ‘App Store’ search for ‘OpenVPN’ and ‘Install’ (it is free).

2. Run ‘OpenVPN’

3. Where it says ‘If you are importing a profile from an OpenVPN Access server, log into……..’ type http://www.clientconfig.com and press ‘Go’.

4. Enter your VPN username and password and press ‘Go’.

5. Now press on the last link ‘Yourself (user-locked profile).

6. Now press on ‘Open in “OpenVPN”’.

7. You will see in the middle of the page that there is a ‘New Profile Available’, press on the green ‘Plus’ symbol on the right.

8. Enter your VPN username (User ID) and password and press ‘Return’ (on the

keyboard).

9. If you are asked for permission of access then press ‘Yes’ is not then you are connected. Type your VPN username and password and click ‘OK’. You are now connected!

10. To disconnect (or connect) slide the ‘on/off’ dial next to ‘Connection’ to the left (or

right).