Onsite Survey Templt Tp-final(3)

8/3/2019 Onsite Survey Templt Tp-final(3)

1/16

BATTERY SWAP SurveyReport

TP-HUAWEI

Site ID:

Location:

Site ID/Location

Site Address:

Scene: (Urban/ rural/mountain)

BTS Type: (Indoor/Outdoor)

Site type:(Sharing or independentif sharing, with which operator)

RT(Building storeys )

Site Area (L*W*H):

Site Height (from GL):

Nearest Landmark:

Date :

Telenor Representative:

Huawei Representative:

- 1 -

TP

Confidential BTS Site Battery Swap Survey Report


2/16

Site Access

Item (Y/N) Remarks

Owner issue

Access Issue at Night

Society Issues

Keys Required

Guard Available (if yes mention

Contact No.)Existing Site is below road

level(M)Existing Site within 25 feet radius

of road Level(Distance)

Level of Pad from Gravel top(mm)

Access Issue For EquipmentDelivery(Any obstacle)

(i) Narrow Street

(ii) Crane usage (RT)

(iii) Stairs usage (RT)

(iv) Narrow Stairs Case orWide(RT)

(v) Equipment Can Easilypass through(RT)

(vi) High Power TransmissionLines (RT)

(vii) Any additional ToolsRequired for access andequipment entrance (e.g.

- 2 -

TP



3/16

ladder/emergency lights)

Equipment Detail

Items Detail Remarks

DG Capacity (Rating)

DG Brand

DG Condition(working/faulty)Transformer Capacity

(Complete Detail)Number of Power Cabinets

on Site (Rectifier)Brand & Rating Power

System

(Rectifier)

Model of Power system

(Rectifier)

Numbers of RectifiermodulesOver All Site Load

(Distribution Current)Number of Working

Rectifier ModulesNumber of Faulty Rectifier

ModulesSpace Available for Extra

Rectifier ModulesExisting Battery Capacity

(Ah)

Number of Battery Banks

Battery Banks Model

Number of cells in each

battery bank

- 3 -

TP



4/16

Availability of battery

temperature sensorGEM Installed

Battery circuit breakers/ fuses information on Rectifier

Fuse1 Fuse 2 Fuse 3 Fuse 4

Make of breaker/fuse

Model

Breaker/fuse

Capacity in Amp(A)

In use/Not in use

Total Battery MCB

Installed in Cabinet

(Brand & Rating)

MCB Installed in

Rectifier or With

Battery Shelve in

Cabinet

AC breakers information in ACDB

No of spare single phase

AC breaker in ACDB

Make of single phase AC

breaker in ACDB

single phase AC breaker

Capacity in Amp(A)

Wapda three phase Voltage

R-Y (Phase-Phase)

Y-B (Phase-Phase)

B-R (Phase-Phase)

R (Phase-Neutral)

- 4 -

TP



5/16

Y (Phase-Neutral)

B (Phase-Neutral)

Required Material Detail

Items Detail Remarks(Details)

Power Cable Length From

Meter To MCCB(Wapda)Mark and measure the AC

cable route length from

existing ACDB to new

Battery Cabinet1 Dia PVC for AC cable

(Make cable routing in

layout)Mark and measure the DC

cable route length from

Rectifier to new Battery

CabinetRequirement of New

Duct(DC & PGND)New Cable Duct for Dc

Cables(RT & GF OPTION-1 &

6)New Cable Ladder for DC

Cable for GF site (Make

cable routing in layout)

Vertical

Horizontal

Check the existing Earthing

bus bar on equipment PadQuantity of spare holesCheck the existing Earthing

bus bar on DG Pad

Quantity of spare holesEarthing cable length (As

Per Requirement)

- 5 -

TP



6/16

Earthing Cable from Pit to

Busbar (If Required)Earthing Cable from Busbar

to new Equipment bar (If

Required)Requirement of New Bus

Bar

Earthing Value()

Important Observations

Critical Issues Impact On SwapProposedSolution

- 6 -

TP



7/16

- 7 -

TP



8/16

Civil Work Part

Space for new Battery Cabinet: Battery rack size (W*D*H) 905mm*1125mm*2155mmOn existingequipmentPad

On DGPAD

Need toextendexistingpad

New PADrequired(L*W)2mx 1.5m

Acquisitionrequired fornew PAD

UndertheTower

OnExistingEmptyPad

Option-1 Option-2 Option-3 Option-4 Option-5 Option-6 Option-7

In case of any options selected above, please fill accordingly below:

Option-1Mention the position of new Battery Cabinet inLayout(mark the dimensions of available space) YES NOMark and measure the AC cable route length fromexisting ACDB to new Battery Cabinet (M)

1 Dia PVC for AC cable(Make cable routing in layout) (M)

Mark and measure the DC cable route length fromRectifier to new Battery Cabinet (M)

New Cable Ladder for DC Cable for GF site

(Make cable routing in layout)

Vertical

(M)

Horizontal

(M)4GI Duct for DC Cable for RT site(Make cable routing in layout) (M)Check the existing Earthing bus bar on equipment PadQuantity of spare holes (Nos)Check the existing Earthing bus bar on DG PadQuantity of spare holes

(Nos)If spare holes available, then mention Earthing cablelength from existing bus bar to new cabinet (M)If spare holes not available, then mention earthing cablefrom new bus bar to pit and form new bus bar to newcabinet. (M)

And form new bus bar to new cabinet. (M)

- 8 -

TP



9/16

Special Remark

Option-2

Mention the position of new Battery Cabinet in Layout YES NOMark and measure the AC cable route length from

existing ACDB to new Battery Cabinet (M)1 Dia PVC for AC cable(Make cable routing in layout) (M)


New Cable Ladder for DC Cable for GF site(Make cable routing in layout)

Vertical

(M)

Horizontal

(M)4GI Duct for DC Cable for RT site(Make cable routing in layout) (M)Check the existing Earthing bus bar on equipment PadQuantity of spare holes (Nos)

Check the existing Earthing bus bar on DG PadQuantity of spare holes (Nos)

Earthing cable length

Special Remark

- 9 -

TP



10/16

Option-3

Mention the position of new Battery Cabinet in Layout YES NO

How much area need to be extend( On Existing Pad) (M^2)

Extended PAD size M x M

Sun shed is needed to extend or not YES NO

Mark and measure the AC cable route length fromexisting ACDB to new Battery Cabinet (M)




Vertical

(M)

Horizontal

(M)4GI Duct for DC Cable for RT site(Make cable routing in layout) (M)Check the existing Earthing bus bar on equipment Pad

Quantity of spare holes (Nos)Check the existing Earthing bus bar on DG PadQuantity of spare holes (Nos)

Earthing cable length from existing bar to new bar

Earthing cable from new bar to sun shed

Earthing cable from new bar to New Equipment

Mark the North Direction

Special Remark

- 10 -

TP



11/16

Option-4

Space available for new PAD (1.5mx2m) YES NO


New sun shed is required for new PAD YES NOMark and measure the AC cable route length fromexisting ACDB to new Battery Cabinet (M)




Vertical

(M)

Horizontal

(M)4GI Duct for DC Cable for RT site(Make cable routing in layout) (M)Check the existing Earthing bus bar on equipment PadQuantity of spare holes (Nos)Check the existing Earthing bus bar on DG PadQuantity of spare holes (Nos)




North direction

Special Remark

- 11 -

TP



12/16

Option-5

Check the possibilities of space for acquiring Available

Not Available


New sun shed is required for new PAD YES NOMark and measure the AC cable route length fromexisting ACDB to new Battery Cabinet (M)




Vertical

(M)

Horizontal

(M)4GI Duct for DC Cable for RT site(Make cable routing in layout) (M)Check the existing Earthing bus bar on equipment PadQuantity of spare holes (Nos)

Check the existing Earthing bus bar on DG PadQuantity of spare holes (Nos)




Special Remark

- 12 -

TP



13/16





Vertical

(M)

Horizontal


(Nos)If spare holes available, then mention Earthing cablelength from existing bus bar to new cabinet (M)If spare holes not available, then mention earthing cablefrom new bus bar to pit and form new bus bar to new

cabinet. (M)


Special Remark

- 13 -

TP



14/16



Mark and measure the DC cable route length from

Rectifier to new Battery Cabinet (M)New Cable Ladder for DC Cable for GF site(Make cable routing in layout)

Vertical

(M)

Horizontal


(Nos)If spare holes available, then mention Earthing cablelength from existing bus bar to new cabinet (M)

If spare holes not available, then mention earthing cablefrom new bus bar to pit and form new bus bar to newcabinet. (M)


Special Remark

- 14 -

TP



15/16

Site Snaps(obligatory)

1. Complete site view from main entrance (2 to 3 snaps) from differentangles.

2. Complete site view from tower 6 m height.

3. Site level from road level

4. Narrow Street (For Crain usage)

5. Stairs usage (RT)

6. Proposed Equipment space covering the surroundings (marked all four

directions).

7. Existing DG PAD.

8. Existing Battery Bank.

9. Battery Bank Brand/Rating

10. Existing BTS & PAD snaps from appropriate distance (cover whole

scenario of pad).

11.Transformer Snap

12.ACDB/ATS.

13.Rectifier with open door from front.

- 15 -

TP



16/16

14.1 Rectifier modules rating snaps.

15. Equipment & DG pad earthing bus bar snaps.

16. . Earthing Value Snaps.

17. . Earhting pit snap.

18. Wapda Voltage (P/P-01) & (P/N-03)

- 16 -

TP


Documents

Onsite Survey Templt Tp-final(3)