ONSITE OFFERS - Powertools motor efficiency ... • RapidCycle sequential firing mechanism ... TCT reversible blades, Dust Bag, Side Fence, Hex Wrench,

OCTOBER - NOVEMBER 2016

ONSITE OFFERS

New 3-speed XRP draws cool, clean air from the base of the tool to maintain ideal running temperature.

RESULT: YOUR TOOL WILL LAST LONGER

18V DCD996P2-XE Gear box 3 SpeedNo-load speed 0-450/1,300/2,000rpm (2,250rpm hammer)Beats per min 0-8,600/25,500/38,250bpmMax Torque (Hard) 95NmMax Torque (Soft) 66NmMax. Drilling Capacity [Wood] 55mmMax. Drilling Capacity [Metal] 15mmMax. Drilling Capacity [Masonry] 16mm

XRP COMBI DRILLDCD996P2-XE

INCREASED POWER FOR IMPROVED PERFORMANCE AND FASTER APPLICATION SPEED

The power output of the new DEWALT 18V XRP Hammer Drill Driver has been increased to 820 UWO (unit watts out) which means its able to complete a wide range of applications - fast. The increased power output offers faster application speed in all tasks especially under heavy load conditions.

• Increased speed of application from 34,00BPM (DCD995) to 38,250BPM at 2,250RPM

• Improved 3 position LED, with a 20 minute torch setting allows for better task visibility

• Increased air flow to prolong drill life

APPLICATION PERFORMANCEDCD776

42Nm

DCD785

60Nm

DCD985

80Nm

DCD996

95Nm

350 UWO(UNITS WATTS OUT)




NEW XRP TECHNOLOGY PERFORMANCE FOR REAL APPLICATIONS

18V 3-SPEED XRPHEAVY DUTY HAMMER DRILL

E-Clutch Technology Precise finish first time, every time

All metal chuckIncreased

performance & durability

XR Intelligent switch module maximum tool & battery protection

LED WORK LIGHTFoot mounted LED

reduces chuck shadow

LOW 2.6 Lumens 20sec delay

MEDIUM 18 Lumens 20sec delay

HIGH 60 Lumens

20min torch function

95Nm torque Brushless motor

efficiency+ High capacity battery

= Extreme Runtime

XR Li-Ion 5.0Ah batteriesExtended runtime& optimised power

3 speed functionality

38,250 BPM at 2,250RPM for fast masonry drilling

NEW

ELECTRONIC CLUTCH

Not only does the Intelligent Trigger protect the tool and battery, it also now controls the clutch. The Electronic Clutch is smart enough to know what speed the drill is in, the torque setting selected and even how hard you are pulling the trigger. The Electronic Clutch with 11 torque settings offers more precise control from fewer settings which means you have more control and get the job done faster.

ALL METAL GEARBOXProvides smooth power

transfer and increased durability

POWERFUL BRUSHLESS MOTORFor improved efficiency and

heavy duty tasks

• NEW Automatic high speed hammer 38,250 BPM

• XRP 3 Speed all-metal Transmission• Brushless motor technology• Electronic Clutch• 3 position LED Work light• 60 lumen torch function

with 20min LED delay

32

INCLUDES

XRP HAMMER DRILL KITDCD996P2-XE

2 TOOL XRP COMBO KITDCK276P2-XE

6 TOOL XRP COMBO KIT *

DCK696P2B-XE

• XRP 3 Speed all-metal Transmission• No-load speed: 0-450/1,300/2,000rpm

(2,250rpm hammer)• Beats per min: 0-8,600/25,500/38,250bpm• Torque: 95 Nm• LED Work light• Brushless motor technology• Electronic ClutchKit includes: 2 x 5.0Ah XR Li-Batteries, Multi Voltage Charger, Side Handle, TSTAK™ Kit Box

DCD996 XRP Hammer Drill:• E-Clutch, 3 speed, 95Nm, 2,000rpm (2,250rpm hammer)

DCF887 Impact Driver:• 205Nm, 3,800ipm, 3 speed / torque settings

Supplied with TOUGHSYSTEM™ Kit Box

Kit includes:2 x 5.0Ah XR Li-Batteries, Multi Voltage Charger,Side Handle, TOUGHSYSTEM™ Kit Box

DCD996 XRP 3spd Hammer DrillDCF887 Brushless 3spd Impact DriverDCS380 Reciprocating SawDCS391 Circular SawDCG412 125mm Angle GrinderDCR006 Bluetooth Worksite SpeakerTool Connect™ for security and inventory management

Kit includes: 2 x 5.0Ah XR Li-Ion Bluetooth Batteries, Multi Voltage Charger, 2x TOUGHSYSTEM™ Kit Box

NEW 18V XR LI-ION XRP KITS 18V KITS - ALL NEW XRP HAMMER DRILL

DCF899HP2-XE

18V XR LI-ION 1/2" HIGH TORQUE BRUSHLESS IMPACT WRENCH - FRICTION RING

• No-load speed: 0 - 400 / 1200 / 1900 rpm

• Impacts per min: 0-2,400ipm• Torque: 950 Nm (1625Nm breakaway)• 1/2" (12.7mm) socket drive

with friction ring• 3 speed / torque settings• Aluminium front housing

for durability

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, Heavy Duty TSTAK™ Kit Box

18V XR LI-ION 1/2” HIGH TORQUE BRUSHLESS IMPACT WRENCH - DETENT PIN

DCF899P2-XE

REDEMPTION* REDEMPTION*

• No-load speed: 0 - 400 / 1200 / 1900 rpm

• Impacts per min: 0-2,400ipm• Torque: 950 Nm

(1625Nm breakaway)• 1/2" (12.7mm) Socket Drive• 3 speed / torque settings• Aluminium front housing

for durability


18V XR LI-ION ½" IMPACT WRENCHES BRUSHLESS TECHNOLOGY - DETENT PIN OR FRICTION RING AVAILABLE

TORQUE 950Nm (1625Nm BREAKAWAY)

3 SPEED SETTINGS

BRUSHLESS MOTOR

Available as: DCF899P2-XE 5.0AH Kit and DCF899N-XE Bare Tool (detent pin)

DCF899HP2-XE 5.0AH Kit and DCF899HN-XE Bare Tool (friction ring)

Bare tool also available: DCD996N-XE

*Available November

54

18V XR COMPACT IMPACT WRENCH - BARE DCF880N-XE


*Go to WWW.GUARANTEEDTOUGH.CO.NZ to redeem. Terms & Conditions available online.

INCLUDES

INCLUDES

4.0

REDEMPTION OFFERS

REDEMPTION*

REDEMPTION*

REDEMPTION*

REDEMPTION*

18V XR LI-ION BRUSHLESS RAPID CYCLE 16 GAUGE FINISH NAILER KIT

18V XR LI-ION BRUSHLESSSDS-PLUS ROTARY HAMMER - KIT

18V XR LI-ION BRUSHLESS RAPID CYCLE2 SPEED FRAMING NAILER - KIT

18V XR LI-ION SDS-PLUS ROTARY HAMMER - KIT

• Nail Length: 32 - 63mm, Magazine Angle: 20°• Compact, lightweight & ergonomic design• Gas-free operation - reduced running cost• Reduced running costs & servicing requirements• Brushless Motor means longer runtime• RapidCycle sequential firing mechanism• Thumb wheel depth adjuster


• 3 mode cordless Rotary Hammer• Brushless motor technology• Up to 24mm capacity in concrete• Best in class Hand/Arm vibration 6.6 m/s²• Impact Energy: 2.1J• Beats per min: 0-4,600bpm• No Load Speed: 0-1,100rpm• Quick release dual chuck system

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Quick Change Chuck, Multi Voltage Charger, TSTAK™ Kit Box

• Nail Length: 50 - 90mm• Magazine Angle: 30-34°• RapidCycle sequential firing mechanism• Gas-free Operation• 2 Speed operation for increased run time• Up to 800 Nails per Charge• Less Down-time, Lower Running Costs

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, Heavy Duty Kit Box

• Ideal for anchors and fixing holes up to 24mm in masonry• Best in Class Hand/Arm Vibration 6.6 m/s²• Impact Energy: 2.1J, Beats per min: 0-4,500bpm• No Load Speed: 0-1,200rpm• 3 Mode: Chisel, Hammer & Rotary drilling• Quick Release Chuck

Kit includes: 2 x 4.0Ah XR Li-Ion Batteries, Quick Change Chuck, Multi Voltage Charger, Kit Box

DCN661P2-XE

DCH274P2T-XE

DCB695P2-XE

DCH254M2-XE

DCF887P2-XE

DCK693P2-XE

DCZ391P2-XE

18V XR LI-ION 5.0AH BRUSHLESS 2-TOOL COMBO KIT

18V XR LI-ION BRUSHLESS 3 SPD IMPACT DRIVER 5.0AH KIT

18V XR LI-ION 6-TOOL COMBO KIT

18V XR LI-ION 3-TOOL COMBO KIT - INCLUDES BRUSHLESS

DCD796 Brushless Hammer DrillDCF887 Brushless 3spd Impact DriverTOUGHSYSTEM™ Kit Box

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, TOUGHSYSTEM™ Kit Box

• No-load speed: 0-3,250rpm • Impacts per min: 0-3,800ipm• Torque: 205 Nm• 3 speed / torque settings• 6.35mm drop-in hex bit holder • Brushless motor technology• 3x LED “Halo” light ring• Belt clip and magnetic bit storage


DCD985 XRP 3spd Hammer DrillDCF885 Impact DriverDCS380 Reciprocating SawDCS391 Circular SawDCG412 125mm Angle grinderDCL040 LED Pivot Light

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, 2x TOUGHSYSTEM™ Kit Box

DCD796 Brushless Hammer DrillDCF887 Brushless 3spd Impact DriverDCG412 125mm Angle GrinderTSTAK™ Kit Box

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, TSTAK™ Kit Box

DCK266P2-XE

18V XR LI-ION 4-TOOL 5.0AH COMBO KIT - INCLUDES BRUSHLESS

DCD796 Brushless Hammer DrillDCF887 Brushless 3spd Impact DriverDCS380 Reciprocating SawDCS391 165mm Circular SawDS150 TOUGHSYSTEM™

DS400 TOUGHSYSTEM™

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, TOUGHSYSTEM™ Storage

DCK451P2-XE

18V XR LI-ION BRUSHLESS HAMMER DRILL 5.0AH KIT

• Heavy Duty all-metal transmission• Brushless motor technology• No-load speed: 0-550 / 2,000rpm• Beats per min: 0-34,000bpm• Torque: 70 Nm• Max capacity (wood) 40mm• 13mm all-metal keyless chuck• Ultra bright 60 Lumen work light• Belt clip and magnetic bit storage


DCD796P2-XE

REDEMPTION OFFERS

REDEMPTION*

REDEMPTION*

REDEMPTION* REDEMPTION*

REDEMPTION*

REDEMPTION*

76

XR 18V 3 SPEED BRUSHLESS IMPACT DRIVER BARE UNIT DCF887N-XE

18V XR BRUSHLESS HAMMER DRILL BARE UNIT DCD796N-XE

18V XR 4.0AH BATTERY PACK DCB182-XE

18V 5AH XR LI-ION BATTERY PACK DCB184-XE


18V CIRC SAW BARE TOOL DCS391N-XE

18V XR HANDHELD LED WORKLIGHT DCL050-XE

18V XR HANDHELD LED WORKLIGHT DCL050-XE



*Go to WWW.GUARANTEEDTOUGH.CO.NZ to redeem. Terms & Conditions available online. *Go to WWW.GUARANTEEDTOUGH.CO.NZ to redeem. Terms & Conditions available online.

+

+

++

DCP580P2-XE DCP580N-XE

18V XR LI-ION BRUSHLESS PLANER KIT 18V XR LI-ION BRUSHLESS PLANER BARE TOOL

• Brushless motor• Twin blade drum (TCT blades)• On board blade & tool storage• No-load speed: 15,000 rpm• Air Lock™ compatible• Max cut depth: 2mm• Rebate capacity: 9mm• Planer width: 82mm• Shoe length: 295mm• Drum diameter: 48mm

Kit includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, TCT reversible blades, Dust Bag, Side Fence, Hex Wrench, Torx Key, TSTAK™ Kit Box

• Brushless motor• Twin blade drum (TCT blades)• On board blade & tool storage• No-load speed: 15,000 rpm• Air Lock™ compatible• Max cut depth: 2mm• Rebate capacity: 9mm• Planer width: 82mm• Shoe length: 295mm• Drum diameter: 48mm

+

4.0

4.0

CORDLESS MITRE SAW OUTSTANDING PERFORMANCE & ACCURACY

POSITIVEMITRE STOPS

INTEGRATEDCARRY HANDLES

EXTENDED RUNTIME

UP TO 250 CUTS PER CHARGE

DEDICATEDCORDLESS

BLADE

AIR LOCK™

COMPATIBLE

XPS SYSTEM

BARE TOOL: BATTERIES & CHARGER SUPPLIED SEPARATELY

*75MM PINE

DCS365N-XE Cut Capacity H 50mm x W 250mmWeight 11.5Kg total weightBlade speed 3,750rpmMitre range 48°L / 48°RBevel range 48°LRuntime Up to 250 cuts*Blade diameter 184mmBlade bore 16mm

CORDLESS PLANERWORLD’S FIRST BRUSHLESS PLANER

REDEMPTION*

• 1300W motor for performance & durability

• Variable speed: 1750 - 4000rpm• Anti kickback function • 55mm depth of cut• 0- 47° bevel capacity

Kit includes: 8 Tooth Blade, Airlock Adaptor, 1x 1.5m Double Sided Rail, TSTAK™ Kit Box

BONUS

1300W HEAVY DUTY PLUNGE SAWDWS520KT-XE DCK295M2-XE

DCS355M2-XE

10.8V XR LI-ION TWIN PACK 10.8V 3X360° LASER – GREEN BEAM

18V XR LI-ION 2 PIECE KIT

18V XR BRUSHLESS OSCILLATING MULTI-TOOL - 4.0 AH KIT

DCD710 Drill DriverDCF815 Impact DriverTSTAK™ Clear Kit Box

Kit includes: 2 x 2.0Ah 10.8V XR Li-Ion Batteries, Multi Voltage Charger, TSTAK™ Kit Box

• 3 x 360° self levelling, selectable line lasers for full room coverage

• Accuracy ±3mm@10m• Green beam technology. 4x more

visible than comparable red beams• Full time pulse mode – can be used

with compatible detectors• 15m / 30m (radius) visible working

distance. 50m / 100m (radius) with detector

Kit includes: 10.8v battery and charger, case and magnetic bracketIP65 rated. 2m drop tested. Guaranteed Tough

DCD985 XRP Hammer Drill:• 3 speed, 80Nm, 2,000rpm

DCF880 1/2" Impact Wrench:• 203Nm, 2,700ipm, 1/2” socket drive

Supplied with TOUGHSYSTEM™ Kit Box• Overload protection system

Kit includes: 2 x 4.0Ah XR Li-Ion Batteries, Multi Voltage Charger, TOUGHSYSTEM™ Kit Box

• Versatile multi-tool• Suitable for variety of applications• Quick change accessory system• Universal adaptor• Fits most oscillating accessory brands• Dual grip variable speed trigger• Oscillations per minute: 0-20,000• Brushless motor technology

Kit includes: 2 x 4.0Ah XR Li-Ion Batteries, Multi Voltage Charger, 35Pc Accessory Set, Universal Accessory Adaptor, TSTAK™ Kit Box

DCK211D2T-XE DCE089D1G-XE

BONUS BONUS

BONUS+

• 4,400rpm Brushless Motor, up to 6,000 screws per charge

• Up to 6,000 screws per charge• Tool-free depth control• Rotating detachable screw magazine• Auto & manual operation• Set & Forget manual feed nose piece• Screw length 25 - 57mm

Kit Includes: 2 x 5.0Ah XR Li-Ion Batteries, Multi Voltage Charger, TSTAK™ Kit Box, Collated Magazine, Nose Piece, PR2 Driver Bit

BONUS

18V XR LI-ION BRUSHLESS COLLATED DRYWALL SCREWDRIVER - KIT

DCF620P2K-XE

GREAT DEALS ONSITE

REDEMPTION*

98


50MTR LASER DISTANCE MEASURER (LDM)DW03050-XJ

SANDER PALM GRIP QTR SHEETDWE6411-XE

18V XR 4.0AHBATTERY PACKDCB182-XE

*Go to WWW.GUARANTEEDTOUGH.CO.NZ to redeem. Terms & Conditions available online.*Go to WWW.GUARANTEEDTOUGH.CO.NZ to redeem. Terms & Conditions available online.

10.8V COMPACT LED FLASHLIGHTDCL510N-XJ

10.8V COMPACT LED FLASHLIGHTDCL510N-XJ

18V IMPACT DRIVER BARE TOOL DCF885N-XE

+

+

+

USB CHARGING ADAPTER*

WITH ANY BARE TOOL LISTED OPPOSITEBONUS

DCD796N-XEDCD985N-XE DCD740N-XE DCS380N-XE (Blade not included)

DCS373N-XE

DCF899HN-XE DCS331N-XEDCF899N-XE

DCF620KN-XE DCN695N-XEDCN660N-XE DCS355N-XE

*BONUS USB CHARGING ADAPTER ONLY AVAILABLE AT PARTICIPATING RETAILERS, WHILE STOCKS LAST. BARE TOOLS SUPPLIED WITHOUT BATTERIES & CHARGER.

DCG412N-XEDCS391N-XE

DCF880N-XE

DCF887N-XE

GET WITH THE SYSTEM

CORDLESS OFFERS

DCB102-XE

XR LI-ION DUAL PORT CHARGING STATION WITH DUAL USB OUTLET

• Charge two XR Li-Ion battery pack simultaneously

• 2 x USB charging outlets suitable for charging portable devices

• Suitable for 10.8V, 14.4V, 18V Slide Packs

• Intelligent variable charge system, diagnostic LED indicator

• Protects battery cells during charge

• Charge Time 30mins (1.5Ah battery)

BONUS

BONUS

BONUS

DCL043-XE

DCL060-XE

18V XR LI-ION LED SPOTLIGHT - BARE TOOL

18V XR LI-ION LED AREA LIGHT - BARE TOOL

• 1000 Lumen max. output• Focused high intensity beam• 400m distance rating• Over 10 hours runtime with a 5.0Ah battery

• 1500 lumen output• Broad and even beam pattern• 3.3 hours runtime (5.0Ah battery pack)• Rotatable lamp head• Directional control of light output

CHARGER SUPPLIED SEPARATELY

CHARGER SUPPLIED SEPARATELY

1110

18V XR 2AH BATTERY PACKDCB183-XE



CODE DESCRIPTIONDCD985N-XE 18V XR LI-ION XRP HAMMER DRILL - BARE TOOLDCD796N-XE 18V XR LI-ION BRUSHLESS HAMMER DRILL - BARE TOOLDCD740N-XE 18V XR LI-ION 10MM RIGHT ANGLE DRILL - BARE TOOLDCS380N-XE 18V XR LI-ION RECIPROCATING SAW - BARE TOOLDCS391N-XE 18V XR LI-ION CIRCULAR SAW - BARE TOOLDCS373N-XE 18V XR LI-ION METAL CIR SAW- BARE TOOLDCG412N-XE 18V XR LI-ION 125MM GRINDER - BARE TOOLDCF887N-XE 18V XR LI-ION BRUSHLESS 3 SPD IMPACT DRIVER - BARE TOOLDCN660N-XE 18V XR LI-ION BRUSHLESS 16 GAUGE FINISH NAILER - BARE TOOLDCF620KN-XE 18V XR LI-ION BRUSHLESS COLLATED DRYWALL SCREWDRIVER - BARE TOOLDCS355N-XE 18V XR BRUSHLESS OSCILLATING MULTI-TOOL - BARE TOOLDCN695N-XE 18V XR LI-ION BRUSHLESS 2 SPEED FRAMING NAILER - BARE TOOLDCF899N-XE 18V XR LI-ION 1/2" HIGH TORQUE BRUSHLESS IMPACT WRENCH - BARE TOOL

DCF899HN-XE 18V XR LI-ION 1/2" FRICTION RING HIGH TORQUE BRUSHLESS IMPACT WRENCH - BARE TOOLDCF880N-XE 18V XR LI-ION 1/2" IMPACT WRENCH - BARE TOOLDCS331N-XE 18V XR LI-ION JIGSAW - BARE TOOL

BONUS OFFERS ++

+ +

DWS780-XE

DWE7491-XE

DW872-XEDW735-XE

D28715-XE

DW717-XE

DW745-XE

D28710-XE

305MM 1675W COMPOUND SLIDE MITRE SAW WITH XPS

254MM HEAVY DUTY 2000W PORTABLE TABLE SAW

2200W 355MM TCT METAL CHOP SAW330MM THREE KNIFE, TWO SPEED PORTABLE THICKNESSER

2200W 355MM HIGH PERFORMANCE METAL CHOP SAW

250MM 1675W COMPOUND SLIDE MITRE SAW WITH XPS

254MM PORTABLE 1850W TABLE SAW

355MM ABRASIVE CHOP SAW

• XPS Shadow Cut Line System• Big capacity: H 110mm x W 305mm

or W 345mm x H 76mm• Positive stop bevel & mitre functions• Compact profile for ease of portability

< 25Kg total weight

Includes: High quality 60 Tooth Blade, Blade Spanner, Dust Bag, Material Clamp

• Max ripping capacity 825mm• Steel roll cage• Rack and pinion fence system• 0-48° bevel capacity• Cast table top ensures accuracy• Overload protection system

Includes: 24 tooth saw blade, mitre fence, parallel 2 x blade spanners, push stick

• Accurate burr-free cuts• Electronic soft start• Cool-running 70 tooth 355mm blade• Tungsten carbide tipped tooth design• Parallel and mitre cuts up to 45°• Max Cut at 90° (Square profile)

100x100mm

• 1800W Motor• Three knife cutter head 10,000 RPM• Two speed operation• Capacity: 330mm x 152mm

(3mm max cut depth)• Feed rate: 4m - 8m / min• Fan assisted chip ejection system

Includes: Dust hose adapter, Dust ejection chute

• Keyless blade clamp • Electronic soft start • Horizontal side handle • No-load speed: 4,0000 rpm • Abrasion protected 2200W motor • Spindle lock for quick wheel change• Keyless mitre adjustment• Capacity: 120mm x 120mm• Keyless material clamp

• XPS Shadow Cut Line System• Capacity: H 88mm x W 302mm

or W 320mm x H 76mm• Positive stop bevel & mitre functions• Compact profile for ease of portability

< 23Kg total weight

Includes: High quality 60 Tooth Blade, Blade Spanner, Dust Bag

• Max ripping capacity 610mm• Steel roll cage• Rack and pinion fence system• 0- 48° bevel capacity• Cast table top ensures accuracy• Overload protection system

Includes: 24 tooth saw blade, mitre fence, parallel 2 x blade spanners, push stick

• Quick release clamp for fast work piece clamping

• High power abrasion protected motor delivers high overload capabilities

• Spindle lock for quick & easy wheel change

• Adjustable spark guard allows user to control the direction of sparks

BONUS BONUS

MACHINERY

REDEMPTION*

REDEMPTION*REDEMPTION*

REDEMPTION*

DWE315KT-XE

DWE305PK-XE

DWE6423-XE

¼ SHEET ORBITAL PALM GRIP SANDER

1100 WATT - RECIPROCATING SAW

125MM RANDOM ORBIT SANDER

• 230 Watt Motor• 14,000 orbits per minute• Low vibration design (4m/s²)• Pad size: 108 x 115mm• Hook & Loop or clamp style

abrasive attachment• AirLock™ compatible extractor port

Includes: Dust Bag, Extractor Ports

• 280 Watt Motor• 8,000-12,000 orbits per minute• Low-vibration design (2.5m/s²)• Pad size: 125mm, Orbit size: 2.6mm• Hook & Loop abrasive attachment• AirLock™ compatible extractor port

Includes: Dust Bag, Extractor Ports

DWE6411-XE

BONUS

BONUS

BONUS

BONUS

701 WATT - HEAVY DUTY TOP HANDLE JIGSAW

• Keyless blade change system• Stroke Rate: 0-3,100spm• Stroke Length: 26mm• Tool - free adjustable bevel• Pendulum Action: 4 stage

Includes: Anti-Scratch Cover, Splinter Insert, Dust Adapter, Heavy Duty Kit Box

• 1100 Watt motor• 4 position blade clamp for flush

cutting and added versatility• Lever-action blade change

for ease of use• Stroke rate: 0-2,800 spm• Stroke length: 29mm

Includes: Heavy Duty Kit Box

• Quick change accessory system• Universal adaptor• Dual grip variable speed trigger• Oscillations per minute: 0-20,000• Sanding Platen included

Kit includes: 2 x 4.0Ah XR Li-Ion Batteries, Multi Voltage Charger, 37Pc Accessory Set, Universal Accessory Adaptor, TSTAK™ Kit Box

• 1250 Watt Motor• Variable speed 0-600 / 3500rpm• Variable speed dial• Max Disc dia. 150 & 180 & 230mm• Replaceable wool ingestion shields• No volt release switch

Includes: 180mm Velcro packing pad, 180mm Velcro wool bonnet, Bail side handle, Horizontal side handle

DW331K-XE

BONUS

150MM & 180MM VARIABLE SPEED POLISHER 300W OSCILLATING MULTI-TOOL

DWP849X-XE

BONUS

+ +

+

+

+

+

DWD530KS-XE

1300W E-CLUTCH PERCUSSION DRILL

• Powerful 1300w motor• 2 speed 0-1250/0-3500 rpm• 0-56000 bpm• Maximum drilling wood 40mm• Maximum drilling steel 16mm• Electro-mechanical clutch increases user control• 2 speed gearbox

Includes: Multi-position side handle, Depth stop, Heavy Duty Carrying Case

REDEMPTION*

1312

305MM 60T SAW BLADEDT1183-QZ

254MM SAW BLADEDT1182-QZ

100MM 800W TOGGLE SWITCH SAG DWE4001-XE


*Go to WWW.GUARANTEEDTOUGH.CO.NZ to redeem. Terms & Conditions available online.


SANDER PALM GRIP QTR SHEET DWE6411-XE

HEAVY DUTY DEWALT KIT BAGN061264-LCL



LCD HEATGUN KIT D26414K-XE




LANDSCAPING EQUIPMENT PROFESSIONAL OUTDOOR POWER TOOLSNEW

18V BRUSHLESS BLOWER (BARE TOOL)DCM562PB-XE

18V HEDGE TRIMMER (BARE TOOL)DCM563PB-XE

18V BRUSHLESS STRING TRIMMER (BARE TOOL)DCM561PB-XE

• Air speed - 144 km/h• Brushless motor technology• Variable trigger + speed lock• Quiet design: 56 db• Lightweight & compact design -3.2kg• Comfort grip handle

• 30cm swath• Brushless motor technology• Two-speed control• Fully variable trigger• Pro style guard for more cut access

and better visibility• Patented gear drive design

• 55cm laser cut, dual-action blades• 19mm cutting gap• Lightweight and compact design - 2.9kg• Up to 75min trimming per charge

(with 5.0ah battery)• Hooked-tooth guard blade• Wrap around auxiliary handle

1514

2KG ROTARY HAMMERS

3 Spot 1x Cross line plumb bob

Horizontal 360° beam with vertical line

LASERS3 SPOT PLUMB BOB LASER CROSS LINE + PLUMB DOT LASER 360°+ CROSS LINE LASER

DW083K-XJ DW0822-XJ DW0811-XJ

• Self levelling 3 spot laser • Ideal for floor to ceiling transfer work

Includes: Hard case & integrated magnetic bracket

• Self levelling Cross Line and Plumb Spots• Full-time pulse mode allows use with detector• Integrated magnetic pivoting base Includes: Hard case & batteries

• Vertical-adjust base for easy set-up and fine tune adjustments

• Full-time pulse mode allows use with detector

Includes: Hard case, bracket & batteries

Technical Specifications 3 SPOT PLUMB BOB LASER DW083K-XJ

CROSS LINE + PLUMB DOT LASER DW0822-XJ

360° + CROSS LINE LASERDW0811-XJ

Levelling Type Self Self SelfAccuracy (dot) (dot) 0,2mm@1m (dot) 0,3mm@1m -Accuracy (line) - 0,3mm@1m 0.4mm@1mCompensation Range ± 4° ± 4° ± 4°Levelling Time ≤ 3s ≤ 3s ≤ 3sWorking Range 30m 30m (D) / 15m (L) 15m (L)Screw Thread for Adapter 1/4" 1/4 / 5/8" 1/4 / 5/8"Working Range with detector - 50m 50mBatteries (Alkaline unless otherwise noted) 3 x AA 3 x AA 3 x AABattery Life (all lasers on) 20 hrs 10 hrs 8 hrsOperating Temperature - 10°C > 50°C - 10°C > 50°C - 10°C > 50°CIP Rating IP54 IP54 IP54

+

+

+

D25133K-XE

D25144K-XE

D25263K-XE

26MM 800W SDS-PLUS ROTARY HAMMER

28MM 900W SDS-PLUS ROTARY HAMMER

28MM 900W SDS-PLUS D-HANDLE ROTARY HAMMER

• 4-26mm diameter drilling in concrete & masonry

• Rotation-stop for light chiselling applications

• Impact energy: 2.6 J

• Impact-stop for drilling in wood, steel & plastic

• Mechanical clutch eliminates sudden high-torque reaction

• Electronic variable speed control

Includes: Multi position side handle, Depth stop, TSTAK™ Kit Box


• Quick Change Removable Chuck in wood & steel

• Impact energy: 3.0J


• Mechanical clutch• Electronic variable

speed control

Includes: Multi position side handle with light, Quick Change chuck, TSTAK™ Kit Box



• Impact energy: 3.0J

• Active Vibration Control with floating rear handle

• Mechanical clutch• Electronic variable

speed control

Includes: Multi position side handle with light, Quick Change chuck, TSTAK™ Kit Box




BONUS

BONUS

BONUS

Please fill in this form and post to DEWALT NZ Bonus Offer, PO Box 12135, Penrose 1642. This redemption offer is valid only to those consumers who purchase one of the selected DEWALT NZ products between 1st October to 30th November 2016. Proof of purchase is essential to validate claim. Please send a COPY of your purchase receipt with this claim form. Please provide physical address, no PO. Boxes. Receipt must clearly show model of tool purchased, date of purchase, place of purchase and the price paid to substantiate the claim. DEWALT NZ reserves the right to request further information regarding proof of purchase from the redeemer if circumstances warrant. Keep your original receipt for warranty purposes, as proof of purchase. Goods must be

fully paid for at the time of purchase and on ONE receipt to be eligible. DEWALT NZ accepts no liability for claims that may be delayed, misdirected or lost in the mail causing them to not be received by the closing date. Redemption offer will be dispatched within 30 working days of receipt of the claim while stocks last. This redemption offer is not valid to employees of DEWALT NZ. All Redemption Offer claims must be received by 15th December 2016. This promotion cannot be used in conjunction with any other offer, limited stock available. Offer available while stocks last. An alternative bonus may be provided at the discretion of DEWALT NZ. Offer only valid when product purchased through authorised resellers of DEWALT NZ

TERMS & CONDITIONS

39 Business Parade North, East Tamaki Heights, Auckland.Telephone: 0800 4782 6539 | Fax: 0800 2782 6539

The yellow and black colour scheme is used on DEWALT Power Tools and Accessories as a trademark. DEWALT reserves the right to change any deal at any time without notice. Deals available while stocks last.

www.DEWALT.com

Please tick if you wish to receive information on new DEWALT products, promotions and prize giveaways.

REDEMPTION FORMPlease tick one redemption offer per item purchased on the table below and fill in your details to receive your redemption.

Name: Address:

Email: Phone:

Store Name: Invoice No. (Please attach a copy of your receipt):

PAGE CODE CODE ü

5 DCF899P2-XE DCF880N-XE

5 DCF899HP2-XE DCF880N-XE

6 DCN661P2-XE DCF887N-XE

6 DCN695P2-XE DCD796N-XE

6 DCH274P2T-XE DCB184-XE

PAGE CODE CODE ü

6 DCH254M2-XE DCB182-XE

7 DCZ391P2-XE DCS391N-XE

7 DCK266P2-XE DCF880N-XE

7 DCK451P2-XE DCB184-XE

7 DCK693P2-XE DCB184-XE

PAGE CODE CODE ü

7 DCD796P2-XE DCL050-XE

7 DCF887P2-XE DCL050-XE

8 DCK295M2-XE DCB182-XE

9 DCS365N-XE DCB184-XE

12 DWD530KS-XE DWE4001-XE

PAGE CODE CODE ü

13 DW735-XE DWE6411-XE

13 DW872-XE DWE4001-XE

13 D28715-XE DWE4001-XE

13 D28710-XE DWE4001-XE

JOBSITE CLEAN UP SOLUTIONS HAND HELD WET & DRY VACUUMNEW

DCV517N-XJ Tank capacity 1.9 LitreFilter efficiency Traps 99.7% of dustMax air flow 15.9 L/secHose Nozzle Outside Diameter 32mm

18V XR LI-ION 1.9L VACUUM CLEANERDCV517N-XJ

• Convenient hand held design• Single latch tank removal• Heavy duty washable filter• 1m detachable hose

Supplied as bare tool

Documents

ONSITE OFFERS - Powertools motor efficiency ... • RapidCycle sequential firing mechanism ... TCT reversible blades, Dust Bag, Side Fence, Hex Wrench,