One-Touch Mini Fittings KJ · Series KJ One-Touch Mini Fittings Fittings & Tubing 1414 KJH Straight Union Tubing Tubing KJH Different Diameter Straight KJE Bulkhead Union KJT Dfferent

Series KJ One-Touch Mini Fittings

Fittings & Tubing

1412

One-Touch Mini Fittings

Applicable Tubing

Series KJ

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: M3, M5, R1/8

Fluid

Max. operating pressure

Operating vacuum pressure

Proof pressure

Ambient and fluid temperature

Thread

Thread label (Standard)For application requiring copper-free material (Standard)

Air, Water Note1)

1.0MPa

–100kPa

3.0MPa

–5 to 60˚C, In case of water: 0 to 40˚C (with no condensation)

JIS B0203 (Taper thread for piping)JIS B0209, Class 2 (Metric coarse thread)

JIS B0211, Class 2 (Metric fine thread)

With sealant

Brass parts are all electroless nickel plated.

Mounting

Nut

Note1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.

Tubing material

Tubing O.D.

Nylon, Soft nylon, Polyurethane

ø2, ø3.2, ø4, ø6

PAT.

ChuckApplicable to nylon and polyurethane.Large retaining force.Secure engagement and large retaining force with chuck.

Compatible with low vacuum to 1.0 MPa of pressure.The special shape ensures sealing and reduces resistance of tubing insertion.

Requires little force for removal.Releases the chuck to remove the tubing.Prevents the chuck from biting too deeply into the tubing.Tubing removal is easier.

Enables piping in a narrower space.Body and thread can be rotated (For positioning).Electroless nickel plated.R1/8 thread with sealant.

Packing

Stud

Release bush (Light grey)

O-ringBody (White)Tubing

Gasket

Guide 2Guide 1

Outside diameter reduced by 20%(Compared with series KQ), allowing piping in a narrower space.

Thread sealant as standard.

For application requiring copper-free material. (Electroless nickel plating)

Compatible with vacuum to –100 kPa of pressure.

ø2 One-touch MiniSeries KJ

One-Touch Mini Fittings Series KJ

Fitti

ngs

& T

ubin

g

1413FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION

M3M5

2

M3M5

2

2M3M5

2M5M3

KJH Male Connector

Tubing Female thread hole

3.2

4

6

M5

M3

M3

M5

M5

KJH02-M3 -M5KJH23-M3

-M5 -01S

KJH04-M3 -M5 -01S

KJH06-M5 -01S

Most common style used to pipe from female thread in the same direction.

<M3, M5>

<R1/8>

<R1/8>

The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space.

Applicabletubing O.D.

mm

3.2

6

4

Connecting thread

M3

M3

M5

M5

M5


mm

Connecting thread Model

KJS02-M3KJS23-M3

-M5KJS04-M3

-M5 -01S

KJS06-M5 -01S

Model

<R1/8>

To branch the line from the female thread at 90˚ in each direction.

<M3, M5>


mm

M3

M3

M5

M5

3.2

4

6

Connecting thread

M5

KJT02-M3 -M5

KJT23-M3 -M5 -01S

KJT04-M3 -M5 -01S

KJT06-M5 -01S

Model

<M3, M5>

<R1/8>

Most common style used to pipe from female thread at a right angle.


mm

3.2

6

4

Connecting thread

M3

M3

M5

M5

M5

KJL02-M3 -M5

KJL23-M3 -M5 -01S

KJL04-M3 -M5 -01S

KJL06-M5 -01S

Model

<M3, M5>

<R1/8>

To branch the line from the female thread in the same direction and at 90˚.

<M3, M5>


mm

M3

M3

M5

M5

3.2

4

6

Connecting thread

M5

KJY02-M3 -M5

KJY23-M3 -M5 -01S

KJY04-M3 -M5 -01S

KJY06-M5 -01S

Model

3.2

4

6

M5

M5

M5

KJU23-M5 -01S

KJU04-M5 -01S

KJU06-M5 -01S

To branch a tubing in the same direction.

<M5>

<R1/8>


mm


R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

R1/8

KJS Hex Socket head Male ConnectorKJT Male Branch Tee

KJL Male Elbow KJY Male Run Tee

KJU Branch “Y”

2 M3

<R1/8>

Basically used in the same way as a male elbow.But also used in 3 dimensional piping to prevent interference of fittings.

<M3, M5>


mm

M3

M3

M5

M5

3.2

4

6

Connecting thread

M5

KJW02-M3 -M5KJW23-M3

-M5 -01S

KJW04-M3 -M5 -01S

KJW06-M5 -01S

Model

R1/8

R1/8

R1/8

KJW Extended Male Elbow

M3M5

2

Series KJ One-Touch Mini Fittings

Fittings & Tubing

1414

KJH Straight Union

Tubing Tubing

KJH Different Diameter Straight

KJE Bulkhead Union KJT Dfferent Diameter Tee

KJL Union Elbow KJU Different Diameter Union “Y”

KJT Union Tee

To connect tubing in the same direction.

Applicable tubing O.D.mm

3.246

KJH02-00KJH23-00KJH04-00KJH06-00

Model

To connect tubing through a panel.


23.246

KJE02-00KJE23-00KJE04-00KJE06-00

Model

3.246

To connect tubing at right angles to each other.

Applicable tubing O.D.mm Model

KJL23-00KJL04-00KJL06-00

23.246

To branch tubing into 2 directions each at 90˚ to the original one.


KJT02-00KJT23-00KJT04-00KJT06-00

23.246

To branch tubing in the same direction.


KJU02-00KJU23-00KJU04-00KJU06-00

To connect tubing of different diameters.


2

3.2

4

b3.24466

KJH02-23 -04KJH23-04

-06KJH04-06

Model

To branch the tubing into two at a right angle and reduce the resulting branches in size.


a3.24

b46

KJT23-04KJT04-06

Model

2- a b

ba

To branch tubing into 2 smaller tubing in the same direction as the original one.


a22

3.24

b3.2446

KJU02-23KJU02-04KJU23-04KJU04-06

Model

2- a

b

a

KJU Union “Y”

2

One-Touch Mini Fittings Series KJ

Fitti

ngs

& T

ubin

g


KJL Plug-In Elbow

Tubing One-touch fittings

KJU Plug-In “Y”

KJR Plug-In Reducer KJX Reducer Union Plug-In “Y”

KJL Reducer Elbow

KJF Female Connector

To change the tubing direction from a one-touch fitting by 90˚.


mm3.246

Aplicablefitting size

3.246

KJL23-99KJL04-99KJL06-99

Model

To connect to a smaller one-touch fitting.


mm

Applicablefitting size

3.2

4

4466

KJR02-04KJR23-04

-06KJR04-06

Model

To change the tubing direction from a one-touch fitting by 90˚ as well as to connect to a tubing of a smaller diameter.


mm


3.2

4

466

KJL23-04 -06

KJL04-06

Model

To branch the line from a one-touch fitting into tubing in the same direction.


mm


3.246

3.246

KJU23-99KJU04-99KJU06-99

Model

To branch the line from a one-touch fitting into smaller diameter in the same direction.


mm


3.24

46

KJX23-04KJX04-06

Model

To pipe from the male threaded portion of a pressure gauge, etc.


mm

3.2

6

4

Connecting thread

KJF23-M3 -M5

KJF04-M3 -M5

KJF06-M5

Model

Tubing

M3M5M3M5M5

Male thread

2

KJP PlugTo plug unused one-touch fittings.


2 KJP-02

Model

Series KQ2 One-Touch Fittings

Fittings & Tubing

1416

Applicable tubing diameter: Metric Size Connecting thread: M, R, Rc

Fluid



Proof pressure


Thread

Sealant (Thread portion)

Air, Water Note 1)

1.0MPa

–100kPa

3.0MPa

–5 to 60˚C, In case of water: 0 to 40˚C (With no condensation)



With / Without sealant

Mounting

Nut

Note 1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.

ChuckApplicable to nylon and polyurethaneLarge retaining forceSecure engagement with chuck and large retaining force with collet.

Compatible with a wide range of pressure, from low vacuum to 1.0 MPa.The special shape ensures sealing and reduces resistance in tubing insertion.

Series KQ2: Light greySeries KQ : BlueRequires little force for removalReleases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.

Effective for piping in confined spaceThe body and thread portion can be rotated. (For positioning)

Packing

Stud

Release button

O-ringBody

Tubing

M, R, RcThread

ColletGuide

Series

Series KQ2Series KQ

Body

White

Black

Release button

Light grey

Blue

Tubing material

Tubing outside O.D.

Nylon, Soft Nylon, Polyurethane

ø3.2, ø4, ø6, ø8, ø10, ø12, ø16

Series KQ2: White bodySeries KQ : Black body

PAT.

KQ2/White body

One-Touch Fittings

Applicable Tubing

Series KQ2

Colour

Specifications

Wide range of pressures - Low vacuum (10 Torr) to 10 Bar (1.0MPa) pressure

Wide range of tube systems (3.2mm - 16mm OD tube)

Minimised resistance to air flow

Widest range of configuration available

Choice of body colour to suit customer application

Features

Uni-fitting seriesUniversal application to G, Rc and NPT areas

Also available

Imperial sizes

Contact SMC for details of these types.

A full range of SMC fittings is available tosuit imperial size tubing from 1/8 to 1/2”,with either European standard Metric and Rthreads or American standard UNF andNPT threads.

One-Touch Fittings Series KQ2

Fitti

ngs

& T

ubin

g


3.2

4

6

8

10

12

16

M5

M5M6

M5M6

KQ2H23-M5 -01S -02SKQ2H04-M5 -M6 -01S -02SKQ2H06-M5 -M6 -01S -02S -03SKQ2H08-01S -02S -03SKQ2H10-01S -02S -03S -04SKQ2H12-02S -03S -04SKQ2H16-03S -04S

KQH23-M5 -01S -02SKQH04-M5 -M6 -01S -02SKQH06-M5 -M6 -01S -02S -03SKQH08-01S -02S -03SKQH10-01S -02S -03S -04SKQH12-02S -03S -04SKQH16-03S -04S


<M5, M6>

<R>


mm

Connecting thread

Model

Most common style used to pipe from female thread at aright angle.

<M5>

<M6>

<R>

KQ2H( ) KQH( )

For piping at 45˚ from female thread.Intermediate model between male connector and male elbow.

<M5, M6>

<R>


mmM5M6

M5M6

4

6

8

10

12

16

Connecting thread

KQ2K04-M5 -M6 -01S -02SKQ2K06-M5 -M6 -01S -02S -03SKQ2K08-01S -02S -03SKQ2K10-01S -02S -03S -04SKQ2K12-02S -03S -04SKQ2K16-03S -04S

KQK04-M5 -M6 -01S -02SKQK06-M5 -M6 -01S -02S -03SKQK08-01S -02S -03SKQK10-01S -02S -03S -04SKQK12-02S -03S -04SKQK16-03S -04S


mm

Connecting thread

3.2M5

M5M6

M5M6

4

6

8

10

12

16

KQ2L23-M5 -01S -02SKQ2L04-M5 -M6 -01S -02SKQ2L06-M5 -M6 -01S -02S -03SKQ2L08-01S -02S -03SKQ2L10-01S -02S -03S -04SKQ2L12-02S -03S -04SKQ2L16-03S -04S

KQL23-M5 -01S -02SKQL04-M5 -M6 -01S -02SKQL06-M5 -M6 -01S -02S -03SKQL08-01S -02S -03SKQL10-01S -02S -03S -04SKQL12-02S -03S -04SKQL16-03S -04S

Model

KQ2K (White) KQK (Black)

Model

KQ2L (White) KQL (Black)

R1/8R1/4

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2

R1/8R1/4

R1/8R1/4


R1/8R1/4


Release Button, Light grey

Release ButtonBlue

3.2

4

6

8

10

12

16

M5

M5

M5


<M5>

<R>


mm

Connecting thread

Model

KQ2W (White) KQW (Black)KQ2W23-M5 -01S -02SKQ2W04-M5 -01S -02SKQ2W06-M5 -01S -02S -03SKQ2W08-01S -02S -03SKQ2W10-02S -03S -04SKQ2W12-02S -03S -04SKQ2W16-03S -04S

KQW23-M5 -01S -02SKQW04-M5 -01S -02SKQW06-M5 -01S -02S -03SKQW08-01S -02S -03SKQW10-02S -03S -04SKQW12-02S -03S -04SKQW16-03S -04S

R1/8R1/4

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2

KQ2H/KQH Male Connector KQ2L/KQL Male Elbow


KQ2K/KQK 45 Male Elbow KQ2W/KQW Ext. Male Elbow


Fittings & Tubing

1418


Hexagon Socket Head Male ConnectorThe hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space.

<M5, M6>

<R>


mm

4

6

8

10

12

16

Connecting thread

M5M6

M5M6

KQ2S04-M5 -M6 -01SKQ2S06-M5 -M6 -01S -02SKQ2S08-01S -02S -03SKQ2S10-01S -02S -03S -04SKQ2S12-02S -03S -04SKQ2S16-03S -04S

KQS04-M5 -M6 -01SKQS06-M5 -M6 -01S -02SKQS08-01S -02S -03SKQS10-01S -02S -03S -04SKQS12-02S -03S -04SKQS16-03S -04S

Model

KQ2S( )KQS( )

R1/8

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2

Release Button, Light grey

Release ButtonBlue

KQ2S/KQS

M5

M5<M5>

<R>

Hex. Socket Head Universal Male Elbow

The hexagon socket in the head is used to tighten the body with a hexagon wrench. Useful in a confined space.


mm

4

6

8

10

12

Connecting thread

KQ2VS04-M5 -01SKQ2VS06-M5 -01S -02SKQ2VS08-01S -02S -03SKQ2VS10-02S -03SKQ2VS12-03S -04S

KQ2VS (White)

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

KQ2VS/KQVS

M5

<M5>

<R>

The hexagon head of the body is used to tighten the body with a box wrench in a confined space.


mm

4

6

8

10

12

16

Connecting thread

KQ2V04-M5 -01SKQ2V06-M5 -01S -02SKQ2V08-01S -02S -03SKQ2V10-02S -03SKQ2V12-03S -04SKQ2V16-03S -04S

KQV04-M5 -01SKQV06-M5 -01S -02SKQV08-01S -02S -03SKQV10-02S -03SKQV12-03S -04SKQV16-03S -04S

Model

KQ2V (White) KQV (Black)

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2R3/8R1/2

M5

KQ2V/KQV Universal Male ElbowTo branch the line from the female thread at 90˚ in each direction.

3.2

4

6

8

10

12

16

M5

M5M6

M6M5

<M6>

<R>


mm

Connecting thread

Model

KQ2T (White) KQT (Black)KQ2T23-M5 -01S -02SKQ2T04-M5 -M6 -01S -02SKQ2T06-M5 -M6 -01S -02S -03SKQ2T08-01S -02S -03SKQ2T10-01S -02S -03S -04SKQ2T12-02S -03S -04SKQ2T16-03S -04S

KQT23-M5 -01S -02SKQT04-M5 -M6 -01S -02SKQT06-M5 -M6 -01S -02S -03SKQT08-01S -02S -03SKQT10-01S -02S -03S -04SKQT12-02S -03S -04SKQT16-03S -04S

R1/8R1/4

R1/8R1/4


KQ2T/KQT Male Branch Tee


Fitti

ngs

& T

ubin

g




3.2

4

6

8

10

12

16

M5

M5M6

M6M5

<M5, M6>


mm

Connecting thread

Model

KQ2Y (White) KQY (Black)KQ2Y23-M5 -01S -02SKQ2Y04-M5 -M6 -01S -02SKQ2Y06-M5 -M6 -01S -02S -03SKQ2Y08-01S -02S -03SKQ2Y10-01S -02S -03S -04SKQ2Y12-02S -03S -04SKQ2Y16-03S -04S

KQY23-M5 -01S -02SKQY04-M5 -M6 -01S -02SKQY06-M5 -M6 -01S -02S -03SKQY08-01S -02S -03SKQY10-01S -02S -03S -04SKQY12-02S -03S -04SKQY16-03S -04S

<R>

R1/8R1/4

R1/8R1/4


KQ2Y/KQY Male Run Tee KQ2U/KQU Union “Y”

3.2

4

6

8

10

12

16

M5

M5M6

M5M6


<M5, M6>

<R>


mm

Connecting thread

Model

KQ2U (White) KQU (Black)KQ2U23-M5 -01S -02SKQ2U04-M5 -M6 -01S -02SKQ2U06-M5 -M6 -01S -02S -03SKQ2U08-01S -02S -03SKQ2U10-02S -03S -04SKQ2U12-02S -03S -04SKQ2U16-03S -04S

KQU23-M5 -01S -02SKQU04-M5 -M6 -01S -02SKQU06-M5 -M6 -01S -02S -03SKQU08-01S -02S -03SKQU10-02S -03S -04SKQU12-02S -03S -04SKQU16-03S -04S

R1/8R1/4

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R3/8R1/2

KQ2VD/KQVD Double Uni. Male Elbow

To branch the line from the female thread at right angles. 2 individual parts rotate freely.


mm

Connecting thread

4

6

8

10

12

Model

KQ2VD (White) KQVD (Black)KQ2VD04-01S -02S -03SKQ2VD06-01S -02S -03SKQ2VD08-01S -02S -03S -04SKQ2VD10-02S -03S -04SKQ2VD12-02S -03S -04S

KQVD04-01S -02S -03SKQVD06-01S -02S -03SKQVD08-01S -02S -03S -04SKQVD10-02S -03S -04SKQVD12-02S -03S -04S

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2

Triple Universal Male ElbowKQ2VT/KQVT

4

6

8

10

12

KQ2VT04-01S -02S -03SKQ2VT06-01S -02S -03SKQ2VT08-01S -02S -03S -04SKQ2VT10-02S -03S -04SKQ2VT12-02S -03S -04S

KQVT04-01S -02S -03SKQVT06-01S -02S -03SKQVT08-01S -02S -03S -04SKQVT10-02S -03S -04SKQVT12-02S -03S -04S

To branch line from the female thread into 3 directions at right angles.3 individual parts rotate freely.


mm

Connecting thread

Model

KQ2VT (White) KQVT (Black)


Branch Universal Male Elbow KQ2Z/KQZThe hexagon head of the body is used to tighten the body with a box wrench. Used to branch the line. Elbow union for piping.

<M5>

<R>


mm

4

6

8

10

12

Connecting thread

M5 KQ2Z04-M5 -01SKQ2Z06-01S -02S -03SKQ2Z08-01S -02S -03SKQ2Z10-02S -03SKQ2Z12-03S -04S

KQZ04-M5 -01SKQZ06-01S -02S -03SKQZ08-01S -02S -03SKQZ10-02S -03SKQZ12-03S -04S

Model

KQ2Z (White) KQZ (Black)

R1/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R3/8R1/2

To branch the line from the female thread into 4 tubes in the same direction.

KQ2UD/KQUD Delta Branch “Y”

4

6


mm

Connecting thread

Model

KQ2UD (White) KQUD (Black)KQ2UD04-01S -02SKQ2UD06-01S -02S

KQUD04-01S -02SKQUD06-01S -02S

R1/8R1/4R1/8R1/4


Fittings & Tubing

1420


KQ2LU/KQLU KQ2ZD/KQZD

KQ2ZT/KQZT KQ2D/KQD Male Delta Union

4

6

8

10

12

M5

M5M6

M6KQ2LU04-M5 -M6 -01S -02SKQ2LU06-M5 -M6 -01S -02S -03SKQ2LU08-01S -02S -03SKQ2LU10-02S -03S -04SKQ2LU12-02S -03S -04S

KQLU04-M5 -M6 -01S -02SKQLU06-M5 -M6 -01S -02S -03SKQLU08-01S -02S -03SKQLU10-02S -03S -04SKQLU12-02S -03S -04S

To branch tubing at a right angle from the female thread.

<M5, M6>

<R>


mm

Connecting thread

Model

KQ2LU (White) KQLU (Black)

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

Branch Union ElbowTo branch the line from the female thread into 4 tubes at right angles. 2 individual parts rotate freely.


mm

Connecting thread

4

6

8

10

12

KQ2ZD04-01S -02S -03SKQ2ZD06-01S -02S -03SKQ2ZD08-01S -02S -03S -04SKQ2ZD10-02S -03S -04SKQ2ZD12-02S -03S -04S

KQZD04-01S -02S -03SKQZD06-01S -02S -03SKQZD08-01S -02S -03S -04SKQZD10-02S -03S -04SKQZD12-02S -03S -04S

Model

KQ2ZD (White) KQZD (Black)


Double Branch Universal Male Elbow

4

6

8

10

12

To branch the line from the female thread into 6 tubes at right angles. 3 individual parts rotate freely.


mm

Connecting thread

Model

KQ2ZT (White) KQZT (Black)KQ2ZT04-01S -02S -03SKQ2ZT06-01S -02S -03SKQ2ZT08-01S -02S -03S -04SKQ2ZT10-02S -03S -04SKQ2ZT12-02S -03S -04S

KQZT04-01S -02S -03SKQZT06-01S -02S -03SKQZT08-01S -02S -03S -04SKQZT10-02S -03S -04SKQZT12-02S -03S -04S


Triple Branch UniversalMale Elbow

To branch the line from the female thread into 2 directions at right angles.

4

6

8

10

12

M5

M5M6

M6

<M5, M6>


mm

Connecting thread

Model

KQ2D (White) KQD (Black)KQ2D04-M5 -M6 -01S -02SKQ2D06-M5 -M6 -01S -02S -03SKQ2D08-01S -02S -03SKQ2D10-02S -03S -04SKQ2D12-02S -03S -04S

KQD04-M5 -M6 -01S -02SKQD06-M5 -M6 -01S -02S -03SKQD08-01S -02S -03SKQD10-02S -03S -04SKQD12-02S -03S -04S

<R>

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2


Fitti

ngs

& T

ubin

g


Tubing Tubing

Bulkhead Union

KQ2H/KQH Straight Union KQ2LE/KQLE

KQ2E/KQE KQ2T/KQT Union Tee

KQ2L/KQL Union Elbow KQ2U/KQU Union “Y”

KQ2H/KQH KQ2T/KQT Diff. Dia. Tee

Bulkhead Male ElbowTo connect tubings in the same direction.


3.2468

101216

KQ2H23-00KQ2H04-00KQ2H06-00KQ2H08-00KQ2H10-00KQ2H12-00KQ2H16-00

KQH23-00KQH04-00KQH06-00KQH08-00KQH10-00KQH12-00KQH16-00

Model

KQ2H (White) KQH (Black)

To connect tubings through a panel and change the tubing entry by 90˚.


468

1012

KQ2LE04-00KQ2LE06-00KQ2LE08-00KQ2LE10-00KQ2LE12-00

KQLE04-00KQLE06-00KQLE08-00KQLE10-00KQLE12-00

Model

KQ2LE (White) KQLE (Black)



3.2468101216

KQ2E23-00KQ2E04-00KQ2E06-00KQ2E08-00KQ2E10-00KQ2E12-00KQ2E16-00

KQE23-00KQE04-00KQE06-00KQE08-00KQE10-00KQE12-00KQE16-00

Model

KQ2E( ) KQE( )Release button,Light grey

Release buttonBlue



3.2468101216

KQ2T23-00KQ2T04-00KQ2T06-00KQ2T08-00KQ2T10-00KQ2T12-00KQ2T16-00

KQT23-00KQT04-00KQT06-00KQT08-00KQT10-00KQT12-00KQT16-00

Model

KQ2T (White) KQT (Black)

3.2468

101216



Model

KQ2L (White) KQL (Black)KQ2L23-00KQ2L04-00KQ2L06-00KQ2L08-00KQ2L10-00KQ2L12-00KQ2L16-00

KQL23-00KQL04-00KQL06-00KQL08-00KQL10-00KQL12-00KQL16-00



3.2468

101216

KQ2U23-00KQ2U04-00KQ2U06-00KQ2U08-00KQ2U10-00KQ2U12-00KQ2U16-00

KQU23-00KQU04-00KQU06-00KQU08-00KQU10-00KQU12-00KQU16-00

Model

KQ2U (White) KQU (Black)

Different Dia. Straight

To connect tubings of different diameters.


3.2468

1012

b468

101216

KQ2H23-04KQ2H04-06KQ2H06-08KQ2H08-10KQ2H10-12KQ2H12-16

KQH23-04KQH04-06KQH06-08KQH08-10KQH10-12KQH12-16

Model

KQ2H (White) KQH (Black)ba a

To branch the tubing into two at a right angle and reducethe resulting branches in size.


a3.24681012

b468

101216

KQ2T23-04KQ2T04-06KQ2T06-08KQ2T08-10KQ2T10-12KQ2T12-16

Model

KQ2T (White)

KQT23-04KQT04-06KQT06-08KQT08-10KQT10-12KQT12-16

KQT (Black)

2- a

b


Fittings & Tubing

1422

Tubing Tubing

KQ2LU/KQLUTo connect tubing in the same direction as well as to branch it into another smaller tubing at 90˚.


a681012

b46810

KQ2T06-04KQ2T08-06KQ2T10-08KQ2T12-10

Model

KQ2T (White)

2- a

b

To branch tubing into 2 smaller tubes in the same direction as the original one.


a3.24681012

b468101216

KQ2U23-04KQ2U04-06KQ2U06-08KQ2U08-10KQ2U10-12KQ2U12-16

KQU23-04KQU04-06KQU06-08KQU08-10KQU10-12KQU12-16

Model

KQ2U (White) KQU (Black)a a

b

Different Dia. DoubleUnion "Y"



a46

b68

KQ2UD04-06KQ2UD06-08

KQUD04-06KQUD06-08

Model

KQ2UD (White) KQUD (Black)

4- a

b

4681012


To branch a tube at a right angle into two tubes.

Model

KQ2LU (White) KQLU (Black)KQ2LU04-00KQ2LU06-00KQ2LU08-00KQ2LU10-00KQ2LU12-00

KQLU04-00KQLU06-00KQLU08-00KQLU10-00KQLU12-00

To connect 3 tubes at right angles with each other.


468

1012

KQ2D04-00KQ2D06-00KQ2D08-00KQ2D10-00KQ2D12-00

KQD04-00KQD06-00KQD08-00KQD10-00KQD12-00

Model

KQ2D (White) KQD (Black)

To branch tubing into 4 directions.


4681012

KQ2TW04-00KQ2TW06-00KQ2TW08-00KQ2TW10-00KQ2TW12-00

Model

KQ2TW (White)

To connect 4 tubes at right angles with 2 smaller tubes on both sides.Applicable tubing O.D.

mma6810

b8

1012

KQ2TX06-08KQ2TX08-10KQ2TX10-12

Model

KQ2TX (White)

b ba

a

KQT (Black) is manufactured as a made to order.

This model is not available with black body specifications.


To branch tubing into smaller tubing in 3 directions.Applicable tubing O.D.

mma6810

b81012

KQ2TY06-08KQ2TY08-10KQ2TY10-12

Model

KQ2TY (White)

3- a

b


Branch Union Elbow KQ2T/KQT

KQ2D/KQD Delta Union KQ2U/KQU

Different Diameter Tee

Diff. Dia. Union “Y”

KQ2TW Cross KQ2UD/KQUD

KQ2TX Different Diameter Cross KQ2TY Different Diameter Cross


Fitti

ngs

& T

ubin

g


Ext. Plug-in Elbow

KQ2L/KQL Plug-in Elbow

KQ2L/KQL Reducer Elbow

Tubing

KQ2W/KQW

KQ2U/KQU Plug-in “Y”

KQ2R/KQR Plug-in Reducer KQ2X/KQX Diff. Dia. Plug-in “Y”

One-touch fittings

To change the tubing direction from a one-touch fitting by 90˚.


mm3.2468101216

Fitting size

3.2468101216

KQ2L23-99KQ2L04-99KQ2L06-99KQ2L08-99KQ2L10-99KQ2L12-99KQ2L16-99

KQL23-99KQL04-99KQL06-99KQL08-99KQL10-99KQL12-99KQL16-99

Model


To change the tubing direction from a one-touch fitting by 90˚. Applicable to 3 dimensional piping when used with a plug-in elbow.


mm3.24681012

Fitting size

3.24681012

KQ2W23-99KQ2W04-99KQ2W06-99KQ2W08-99KQ2W10-99KQ2W12-99

KQW23-99KQW04-99KQW06-99KQW08-99KQW10-99KQW12-99

Model

KQ2W (White) KQW (Black)



mmFitting size

3.2

4

12

10

8

6

468

1048

10121012121616

KQ2R23-04KQ2R04-06 -08 -10KQ2R06-04 -08 -10 -12KQ2R08-10 -12KQ2R10-12 -16KQ2R12-16

KQR23-04KQR04-06 -08 -10KQR06-04 -08 -10 -12KQR08-10 -12KQR10-12 -16KQR12-16

Model

KQ2R (White) KQR (Black)

To change the tubing direction from a one-touch fitting by 90˚ as well as to connect to tubing of a smaller diameter.


mm3.2

4

6

8

1012

Fitting size

46881010121216

KQ2L23-04KQ2L04-06 -08KQ2L06-08 -10KQ2L08-10 -12KQ2L10-12KQ2L12-16

KQL23-04KQL04-06 -08KQL06-08 -10KQL08-10 -12KQL10-12KQL12-16

Model




mmFitting size

3.2468

101216

3.2468101216

KQ2U23-99KQ2U04-99KQ2U06-99KQ2U08-99KQ2U10-99KQ2U12-99KQ2U16-99

KQU23-99KQU04-99KQU06-99KQU08-99KQU10-99KQU12-99KQU16-99

Model

KQ2U (White) KQU (Black)

To branch the line from a one-touch fitting into tubing of a smaller diameter in the same direction.


mmFitting size

46810

681012

KQ2X04-06KQ2X06-08KQ2X08-10KQ2X10-12

KQX04-06KQX06-08KQX08-10KQX10-12

Model

KQ2X (White) KQX (Black)

To branch the line from a one-touch fitting into 4 tubes of a smaller diameter in the same direction.


mmFitting size

46

68

KQ2XD04-06KQ2XD06-08

KQXD04-06KQXD06-08

Model

KQ2XD (White) KQXD (Black)

KQ2XD/KQXD Double Branch “Y”


Fittings & Tubing

1424

Tubing Male Thread



mm

4

6

8

10

12

16

Connecting thread

KQ2F04-01 -02KQ2F06-01 -02 -03KQ2F08-01 -02 -03KQ2F10-02 -03KQ2F12-02 -03 -04KQ2F16-03 -04

KQF04-01 -02KQF06-01 -02 -03KQF08-01 -02 -03KQF10-02 -03KQF12-02 -03 -04KQF16-03 -04

Model

KQ2F( ) KQF( )

3.2

4

6

8

10

12

16

Used for trunk connection between tubing and a male thread installed through a panel.


mm

Model

KQ2E( )KQE( )KQ2E23-02KQ2E04-01 -02KQ2E06-01 -02 -03KQ2E08-01 -02 -03KQ2E10-02 -03KQ2E12-03 -04KQ2E16-03 -04

KQE23-02KQE04-01 -02KQE06-01 -02 -03KQE08-01 -02 -03KQE10-02 -03KQE12-03 -04KQE16-03 -04

Connecting thread

To pipe from the male threaded at the right angle.

<M5, M6>

<Rc>


mmM5M6

M5M6

4

6

8

10

12

Connecting thread

KQ2LF04-M5 -M6 -01 -02KQ2LF06-M5 -M6 -01 -02 -03KQ2LF08-01 -02 -03KQ2LF10-02 -03 -04KQ2LF12-02 -03 -04

KQLF04-M5 -M6 -01 -02KQLF06-M5 -M6 -01 -02 -03KQLF08-01 -02 -03KQLF10-02 -03 -04KQLF12-02 -03 -04

Model

KQ2LF (White) KQLF (Black)

4

6

8

10

12

M5

M5

To connect a line from a male and female thread in the same direction as well as to branch it into 2 pipes at a right angle. Multiplex connections possible.

<M5>

<R, Rc>


mm

Connecting thread

Model

KQ2VF (White) KQVF (Black)KQ2VF04-M5 -01SKQ2VF06-M5 -01S -02SKQ2VF08-01S -02S -03SKQ2VF10-02S -03SKQ2VF12-03S -04S

KQVF04-M5 -01SKQVF06-M5 -01S -02SKQVF08-01S -02S -03SKQVF10-02S -03SKQVF12-03S -04S

Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2Rc3/8Rc1/2

Rc1/4Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc3/8Rc1/2Rc3/8Rc1/2

Rc1/8Rc1/4

Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2Rc1/4Rc3/8Rc1/2

R/Rc1/8

R/Rc1/8R/Rc1/4R/Rc1/8R/Rc1/4R/Rc3/8R/Rc1/4R/Rc3/8R/Rc3/8R/Rc1/2

To branch a line from a male or female thread in the same direction and at a right angle. Multiplex connections possible.

<M5>


mmM5

4

6

8

10

12

Connecting thread

KQ2ZF04-M5 -01SKQ2ZF06-01S -02SKQ2ZF08-01S -02SKQ2ZF10-02S -03SKQ2ZF12-03S -04S

KQZF04-M5 -01SKQZF06-01S -02SKQZF08-01S -02SKQZF10-02S -03SKQZF12-03S -04S

Model

KQ2ZF (White) KQZF (Black)

<R, Rc>

R/Rc1/8R/Rc1/8R/Rc1/4R/Rc1/8R/Rc1/4R/Rc1/4R/Rc3/8R/Rc3/8R/Rc1/2

Release button, Light grey

Release buttonBlue

Release button, Light grey

Release buttonBlue

KQ2F/KQF Female Connector KQ2LF/KQLF Female Elbow

KQ2E/KQE Bulkhead Female Conn. KQ2VF/KQVF Uni. Female Elbow

KQ2ZF/KQZF Branch Uni. Female Elbow


Fitti

ngs

& T

ubin

g


Accessories

4

3.2

6

8101216

Attached to release buttons for various applications to distinguish them by colour.


mmModel Application

To connect 2 one-touch fittings.

Applicable fitting size

468101216

KQ2N04-99KQ2N06-99KQ2N08-99KQ2N10-99KQ2N12-99KQ2N16-99

KQN04-99KQN06-99KQN08-99KQN10-99KQN12-99KQN16-99

Model

KQ2N (White) KQN (Black)

KQ2C-04m

KQ2C-04A-m

KQ2C-04B-m

KQ2C-06m

KQ2C-06A-m

KQ2C-06B-m

KQ2C-08mKQ2C-10mKQ2C-12mKQ2C-16m

KQ2C-01mKQ2C-01A-m

KQ2C-01B-m

KQH, KQ2H04-M5, M6KQS, KQ2S04-M5, M6

KQH, KQ2H23-M5

KQL, KQ2L04-M5, M6KQT, KQ2T04-M5, M6KQY, KQ2Y04-M5, M6

KQL, KQ2L23-M5KQT, KQ2T23-M5KQY, KQ2Y23-M5

KQH, KQ2H06-M5, M6KQS, KQ2S06-M5, M6

KQL, KQ2L06-M5, M6KQT, KQ2T06-M5, M6KQY, KQ2Y06-M5, M6

To connect one-touch fittings of different sizes.


a468

1012

b68

101216

KQ2N04-06KQ2N06-08KQ2N08-10KQ2N10-12KQ2N12-16

KQN04-06KQN06-08KQN08-10KQN10-12KQN12-16

Model


To plug unused tubing.


468

101216

KQ2C04-00KQ2C06-00KQ2C08-00KQ2C10-00KQ2C12-00KQ2C16-00

KQC04-00KQC06-00KQC08-00KQC10-00KQC12-00KQC16-00

Model

KQ2C (White) KQC (Black)

To plug unused one-touch fittings KQ2P (White), KQP (Blue).


3.2468

101216

KQ2P-23KQ2P-04KQ2P-06KQ2P-08KQ2P-10KQ2P-12KQ2P-16

KQP-23KQP-04KQP-06KQP-08KQP-10KQP-12KQP-16

Model

KQ2P (White) KQP (Black)

(m) in the above table is the colour of the cap.See list bellow:B (Black), R (Red), YR (Orange), BR (Brown), Y (Yellow),G (Green), CB (Sky blue), GR (Gray), W (White), BU (Blue)

Connecting thread

To connect a one-touch fitting and R female thread.

Applicablefittingsize

4

6

8

10

KQ2N04-M5 -01SKQ2N06-M5 -01S -02SKQ2N08-02S -03SKQ2N10-03S

KQN04-M5 -01SKQN06-M5 -01S -02SKQN08-02S -03SKQN10-03S

Model


M5

M5

ba

R1/8

R1/8R1/4R1/4R3/8R3/8

KQ2P/KQP Plug KQ2C/KQC Tubing Cap

KQ2N/KQN Nipple

KQ2C Colour Cap

KQ2N/KQN Diff. Dia. Nipple

KQ2N/KQN Adapter

Series KQ2 One-touch fittings with G Type Connection Threads

Fittings & Tubing

1426

One-touch Fittings (Whith G Type Connection Threads)Series KQ2

Applicable tubing: Dimensions mmWith cylindrical threading/tapping: G1/8’’, G1/4’’, G3/8’’, G1/2’’

Features

G

Gasket

Female thread

Male thread

G Thread.

One-touch connection and release.

Possible to use in vacuum to -100kPa.

The male thread for piping drasticallycuts piping manhours.

Suitable foe use with port thrads conformingto ISO1179 and ISO16030.

The seal gasket on the male thread for piping eliminates the need for pipe tape.

Fluid



Proof pressure


Thread

Air, Water Note 2)

1.0 MPa Note 3)

–100 kPa

3.0 MPa

–5 to 60C, In case of water: 0 to 40C (No freezing)

JIS B0207 (EN ISO228)


Mounting

Nut

Applicable Tubing

Specifications

Note 2) The surge pressure must be under the maximum operating pressure.Note 3) The amount of leakage is not zero, and so the use for holding vacuum such as a leak tester should be avoided.

Principal Parts Material

Tubing material

Tubing O.D.

Body C3604BD, PBTC3604BD (Thread portion)

Stainless steel 304Stainless steel 304, C3604BD, PBT

POMNBR

StudChuckGuideCollet, Release buttonSeal, O-ring

Stainless steel 304, NBRGasket

Note 1) The soft nylon tube is not available with water.

FEP,PFA, Nylon, Soft nylon (Note1), Polyurethane

ø4, ø6, ø8, ø10, ø12, ø16

Product’s Color

Series Body Release buttonSeries KQ2 White Light grey

Raco

ords

et t

ubes

/A

uxili

aire

s de

lign

e

One-touch fittings with G Type Connection Threads Series KQ2

Fitti

ngs

& T

ubin

g


4

6

8

10

12

16

1 8

1 8

1 81 4

1 43 8

1 43 8

KQ2H04-G01

KQ2H06-G01

KQ2H08-G01KQ2H08-G02



1 4 KQ2H04-G02

1 8 KQ2H10-G01

1 4

3 8

KQ2H06-G02

KQ2H08-G03

3 8 KQ2H06-G03

1 2 KQ2H10-G04

1 2 KQ2H12-G043 8 KQ2H16-G031 2 KQ2H16-G04

4

6

8

10

12

16

1 8

1 8

1 81 4

1 43 8

3 8

1 43 8

KQ2L04-G01

KQ2L06-G01

KQ2L08-G01KQ2L08-G02



1 4 KQ2L04-G02

1 8 KQ2L10-G01

1 4

3 8

KQ2L06-G02

KQ2L08-G03

3 8 KQ2L06-G03

1 2 KQ2L10-G04

1 2

1 2

KQ2L12-G04KQ2L16-G03KQ2L16-G04

Male Branch Tee:

KQ2T

4

6

8

10

12

16

1 8

1 8

1 81 4

1 43 8

1 43 8

KQ2T04-G01

KQ2T06-G01

KQ2T08-G01KQ2T08-G02



1 4 KQ2T04-G02

1 8 KQ2T10-G01

1 4

3 8

KQ2T06-G02

KQ2T08-G03

3 8 KQ2T06-G03

1 2 KQ2T10-G04

1 2 KQ2T12-G043 8 KQ2T16-G031 2 KQ2T16-G04

Male Connector:

KQ2HMale Elbow:

KQ2L

Male Run Tee:

KQ2Y

4

6

8

10

12

16

1 8

1 8

1 81 4

1 43 8

1 43 8

KQ2Y04-G01

KQ2Y06-G01

KQ2Y08-G01KQ2Y08-G02



1 4 KQ2Y04-G02

1 8 KQ2Y10-G01

1 4

3 8

KQ2Y06-G02

KQ2Y08-G03

3 8 KQ2Y06-G03

1 2 KQ2Y10-G04

1 2 KQ2Y12-G043 8 KQ2Y16-G031 2 KQ2Y16-G04

Female Connector:

KQ2F

4

6

8

10

12

1 8

1 8

1 81 4

1 43 81 4

3 8

KQ2F04-G01

KQ2F06-G01

KQ2F08-G01KQ2F08-G02



1 4 KQ2F04-G02

1 4

3 8

KQ2F06-G02

KQ2F08-G03

3 8 KQ2F06-G03

1 2

KQ2F12-G02

1 2


Extended Male Elbow:

KQ2W

4

6

8

10

12

1 8

1 8

1 81 4

1 43 8

1 43 8

KQ2W04-G01

KQ2W06-G01

KQ2W08-G01KQ2W08-G02



1 4 KQ2W04-G02

1 4

3 8

KQ2W06-G02

KQ2W08-G03

3 8 KQ2W06-G03

1 2 KQ2W10-G04

1 2 KQ2W12-G0416

3 8

3 81 2

KQ2W16-G03KQ2W16-G0416

Hexagon Socket Head Male Connector:KQ2S

4

6

8

10

12

1 8

1 81 4

1 43 8

1 43 8

KQ2S08-G01KQ2S08-G02



1 8 KQ2S04-G01

1 8 KQ2S10-G01

1 4

3 8

KQ2S06-G01

KQ2S08-G03

KQ2S06-G02

1 2 KQ2S10-G04

1 2 KQ2S12-G04

Bulkhead Connector: KQ2E

4

6

8

10

12

1 8

1 8

1 81 4

3 8

3 8

KQ2E04-G01

KQ2E06-G01

KQ2E08-G01KQ2E08-G02



1 4 KQ2E04-G02

KQ2E10-G02

1 4

3 8

KQ2E06-G02

KQ2E08-G03

3 8 KQ2E06-G03

1 2 KQ2E12-G04

Universal Male Elbow:

KQ2V4

6

8

10

12

1 81 8

1 81 4

1 43 83 8

KQ2V04-G01KQ2V06-G01



KQ2V10-G02

1 4

3 8

KQ2V06-G02

KQ2V08-G03

1 2 KQ2V12-G04

3 81 2


16

1 43 8

1 2

3 8 KQ2V16-G03KQ2V16-G04

161 2

ModelConnection

threadG

Applicable tubing O.D.

(mm)Model

Connection thread

G


(mm)Model

Connection thread

G


(mm)ModelConnection

threadG


(mm)

ModelConnection

threadG


(mm)Model

Connection thread

G


(mm)Model

Connection thread

G


(mm)Model

Connection thread

G


(mm)

ModelConnection

threadG


(mm)

Series KS/KX Rotary One-Touch Fittings

Fittings & Tubing

1428

Rotary One-Touch Fittings

Applicable Tubing

Series KS/KX

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: M,R

Fluid



Proof pressure


Thread

Air

1.0MPa

–100kPa

3.0MPa

–5 to 60˚C (With no condensation)


HolderElectroless nickel plating allows copper-free applications.

The special rotary seal minimizes rotating torque and friction.

Low-torque, low-friction operation with oil containing slide bearing.

The ball bearing ensures low-torque rotation.

Series KS: BlueSeries KX: Light greyThe male connector is provided with a tubing rotation prevention mechanism.

Ball bearing

Cassette

Electroless nickel plating allows copper-free applications.Thread sealant is standardized.

Stud

Rotary seal

Slide bearing

Tubing material

Tubing O.D.

Nylon, soft nylon, Polyurethane

ø4, ø6, ø8, ø10, ø12


Rotating torque N·m

Allowable number of rotations S-1

PAT.

Rotary one-touch fittings for low-torque rotation.

Applicable to oscillating and rotating sections of robots etc.

For application requiring copper-free material (Electroless nickel plated)

R1/8 thread sealant is standardized.

Note1)

Rotary sealX ring shape minimizes friction while providing an excellent seal. Seal is fire and shock proof fluorine rubber. It proves against high friction heat in high speed rotation and longer life.

ScraperPrevents chips from entering the bearing parts.

Ball bearingThe ball bearing ensures low-torque rotation. SUS440C improves corrosion resistance.

Series KX (High speed type) construction

Series KS(Standard) * Other specifications are same as those of series KS.

Note1) Take precautions regarding the maximum operating pressure with soft nylon and polyurethane.

ø8

0.0146.7

20

ø6

0.0128.4

20

ø4

0.0068.4

25

ø10

0.0205

16.7

ø12

0.0224.2

16.7Series KS

Series KX

Note1)

Note1) Rotating torque at a 0.5 MPa pressure.

Male Connector

Male Elbow

Rotating Torque / Allowable Number of Rotations

Series KX (Construction)

Rotary One-Touch Fittings Series KS/KX

Fitti

ngs

& T

ubin

g


KSH Male Connector

Standard Series KS

KSL Male Elbow

KXH Male Connector KXL Male Elbow

4

6

8

10

12

M5

M5M6

M6


<M5, M6>

<R>


mm

Connecting thread

Model


<M5, M6>

<R>


mmM5M6

M5M6

4

6

8

10

12

Connecting thread

KSL04-M5 -M6 -01S

KSL06-M5 -M6 -01S -02SKSL08-01S

-02S -03SKSL10-02S

-03S -04SKSL12-03S

-04S

Model

KSH04-M5 -M6 -01S

KSH06-M5 -M6 -01S -02SKSH08-01S

-02S -03SKSH10-02S

-03S -04SKSH12-03S

-04S

4

6

8

10

12

M5

M5M6

M6


<M5, M6>

<R>


mm

Connecting thread

Model


<M5, M6>

<R>


mmM5M6

M5M6

4

6

8

10

12

Connecting thread

KXL04-M5 -M6 -01S

KXL06-M5 -M6 -01S -02S

KXL08-01S -02S -03S

KXL10-02S -03S -04S

KXL12-03S -04S

Model

KXH04-M5 -M6 -01S

KXH06-M5 -M6 -01S -02SKXH08-01S

-02S -03SKXH10-02S

-03S -04SKXH12-03S

-04S

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

High Speed Type Series KX

Series KM One-Touch Fitting Manifold

Fittings & Tubing

1430

One-Touch Fitting Manifold

Applicable Tubing

Series KM

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: R, Rc

Model

Fluid


Proof pressure


Thread

Accessory

Air, Water Note1)

1.0MPa

3.0MPa


KM11

—

No

KM12

JIS B0203 (Taper thread for piping)

Hexagon socket head plug: 1 pc

KM13

—

No

KM14


No

KM15

—

No

KM16

—

No


Tubing material

Tubing O.D.


ø4, ø6, ø8, ø10, ø12

Model

KM11

ø8

ø10

ø12

Rc1/4

Rc3/8

ø6

ø8

ø10

ø6, R1/8

ø6, R1/4

ø6, R3/8

ø8, R1/8

ø8, R1/4

ø8, R3/8

ø10, R1/4

ø10, R3/8

ø10, R1/2

ø6

ø8

ø10

ø4

ø6

One-touch fitting

Port A

One-touch fitting

Port B

Porting

6, 10

KM12 One-touch fitting Rc female thread 6, 10

KM13 One-touch fitting One-touch fitting 3

KM14 One-touch fitting One-touch fittingR male thread 3

KM16 One-touch fitting One-touch fitting 3

KM15 One-touch fittingOne-touch fitting

rod 3

Number of port APort A port sizePort B

Port size ø8

ø6

ø4

Compact and lightweight.

Centralized piping possible.

Rich variation of 40 styles.

One-touch installation.

Threaded or one-touch fitting inlet or plug-in stem.

3,6 or 10 way manifold.

Model

One-Touch Fitting Manifold Series KM

Fitti

ngs

& T

ubin

g


KM11

One Touch Fittings Manifold

KM14Applicable tubing O.D.

mmA

4

6

8

B

8

10

12

KM11-04-08-6 -10

KM11-06-10-6 -10

KM11-08-12-6 -10

Model

6106

106

10

Number of port A

A

B


A

4

6

8

B6881010

KM13-04-06-3 -08-3KM13-06-08-3 -10-3KM13-08-10-3

Model

33333

Number of port AA


mmConnecting

thread

4

6

8

KM12-04-02-6 -10

KM12-06-02-6 -10

KM12-08-03-6 -10

Model

6106

106

10

Number of port A

A

Applicable tubingO.D. mmA

4

4

6

6

8

B

6

8

8

10

10

KM14-04-06-01S-3 -02S-3 -03S-3KM14-04-08-01S-3

-02S-3 -03S-3KM14-06-08-01S-3

-02S-3 -03S-3KM14-06-10-02S-3

-03S-3 -04S-3KM14-08-10-02S-3

-03S-3 -04S-3

Model

333333333333333

Number of port A

A

B

B


A446

B466

KM16-04-04-3KM16-04-06-3KM16-06-06-3

Model

333

Number of port AA

Connecting thread

Applicable tubingO.D. mmA

4

6

8

B6881010

6881010

KM15-04-06-3 -08-3KM15-06-08-3 -10-3KM15-08-10-3

Model

33333

Number of port A

A

B


B

A

Rc1/4

Rc1/4

Rc3/8


KM12

KM13

KM15

KM16

Series KF Insert Fittings

Fittings & Tubing

1432

Insert Fittings, Resin sleeve and Brass Sleeve types

Series KF

Specifications

Features

Applicable Tubing

Material / Body, Union nut: BrassMaterial / Sleeve: Resin or Brass

Fluid temperature /

–5 to 15°C (Brass sleeve)

–5 to 60°C (Resin sleeve)

Can be used with steam. (For brass sleeve)

Grease-free

Applicable tubing material / FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin

The insert mechanism provides a reliable retaining force on the tube. Sleeve

Body

Tube can be connected without fully removing the nut.Prevents the tube from disconnecting during piping. Light tightening

torque

Union nut

Note) Please avoid using in a vacuum holding application such as a leak tester, as leakage may occur.

Sleeve materialFluidAmbient and fluid temperatureMaximum operating pressureOperating vacuum pressure Note)

Proof pressureLubricantSeal (Thread portion)

1.0 MPa–101.3 kPa

7.0 MPa (at 60C)Grease-free

None or with sealant

BrassAir, Steam

–5 to 150°C (No freezing)

ResinAir


Series Tubing O.D. Tubing O.D. x I.D. (mm)ø10 x ø6.5 ø10 x ø7.5 ø12 x ø8 ø12 x ø9ø8 x ø6ø8 x ø5ø6 x ø4ø4 x ø2.5

TTSTUTPTPSTHTL

NylonSoft nylon

PolyurethanePolyolefin

Soft polyolefinFEP

Super PFA

Insert Fittings Series KF

Fitti

ngs

& T

ubin

g


O.D. I.D.

Connec-tion

thread

ModelApplicabletubing size (mm)

Resin sleeve Brass sleeveR1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2R1/4R3/8R1/2

KFH04-01SKFH04-02SKFH06-01SKFH06-02SKFH06-03SKFH08U-01SKFH08U-02SKFH08U-03SKFH08N-01SKFH08N-02SKFH08N-03SKFH10U-02SKFH10U-03SKFH10U-04SKFH10N-02SKFH10N-03SKFH10N-04SKFH12U-02SKFH12U-03SKFH12U-04SKFH12N-02SKFH12N-03SKFH12N-04S

KFH04B-01SKFH04B-02SKFH06B-01SKFH06B-02SKFH06B-03S

———

KFH08B-01SKFH08B-02SKFH08B-03S

———


———


O.D. I.D.

Model


KFL04-01SKFL04-02SKFL06-01SKFL06-02SKFL06-03SKFL08U-01SKFL08U-02SKFL08U-03SKFL08N-01SKFL08N-02SKFL08N-03SKFL10U-02SKFL10U-03SKFL10U-04SKFL10N-02SKFL10N-03SKFL10N-04SKFL12U-02SKFL12U-03SKFL12U-04SKFL12N-02SKFL12N-03SKFL12N-04S

KFL04B-01SKFL04B-02SKFL06B-01SKFL06B-02SKFL06B-03S

———

KFL08B-01SKFL08B-02SKFL08B-03S

———


———


O.D. I.D.

Model


KFT04-01SKFT04-02SKFT06-01SKFT06-02SKFT06-03SKFT08U-01SKFT08U-02SKFT08U-03SKFT08N-01SKFT08N-02SKFT08N-03SKFT10U-02SKFT10U-03SKFT10U-04SKFT10N-02SKFT10N-03SKFT10N-04SKFT12U-02SKFT12U-03SKFT12U-04SKFT12N-02SKFT12N-03SKFT12N-04S

KFT04B-01SKFT04B-02SKFT06B-01SKFT06B-02SKFT06B-03S

———

KFT08B-01SKFT08B-02SKFT08B-03S

———


———


O.D. I.D.

Model


KFY04-01SKFY04-02SKFY06-01SKFY06-02SKFY06-03SKFY08U-01SKFY08U-02SKFY08U-03SKFY08N-01SKFY08N-02SKFY08N-03SKFY10U-02SKFY10U-03SKFY10U-04SKFY10N-02SKFY10N-03SKFY10N-04SKFY12U-02SKFY12U-03SKFY12U-04SKFY12N-02SKFY12N-03SKFY12N-04S

KFY04B-01SKFY04B-02SKFY06B-01SKFY06B-02SKFY06B-03S

———

KFY08B-01SKFY08B-02SKFY08B-03S

———


———


ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø4

ø6

ø8

ø10

ø12

ø4

ø6

ø8

ø10

ø12

ø4

ø6

ø8

ø10

ø12

ø4

ø6

ø8

ø10

ø12

KFL Male ElbowUsed to pipe tube at right angles to a female thread. Most general type

KFY Male Run TeeUsed to pipe a branch line at right angles and in the same direction from a female thread.

Connec-tion

thread

Applicabletubing size (mm)

Connec-tion

thread


Connec-tion

thread


KFH Male ConnectorUsed to pipe tube in the same direction as a female thread. Most general type

KFT Male Branch TeeUsed to pipe a branch line at right angles in both directions from a female thread.

Insert Fittings

Series KF Insert Fittings

Fittings & Tubing

1434

Insert Fittings

O.D. I.D.

Model


KFV04-01SKFV04-02SKFV06-01SKFV06-02SKFV06-03SKFV08U-01SKFV08U-02SKFV08U-03SKFV08N-01SKFV08N-02SKFV08N-03SKFV10U-02SKFV10U-03SKFV10U-04SKFV10N-02SKFV10N-03SKFV10N-04SKFV12U-02SKFV12U-03SKFV12U-04SKFV12N-02SKFV12N-03SKFV12N-04S

KFV04B-01SKFV04B-02SKFV06B-01SKFV06B-02SKFV06B-03S

———

KFV08B-01SKFV08B-02SKFV08B-03S

———


———


O.D. I.D.


Resin sleeve Brass sleeve

ø6ø6.5

KFH04-00KFH06-00KFH08U-00KFH08N-00KFH10U-00KFH10N-00KFH12U-00KFH12N-00

KFH04B-00KFH06B-00

—KFH08B-00

—KFH10B-00

—KFH12B-00

O.D. I.D.


Resin sleeve Brass sleeveKFT04-00KFT06-00KFT08U-00KFT08N-00KFT10U-00KFT10N-00KFT12U-00KFT12N-00

KFT04B-00KFT06B-00

—KFT08B-00

—KFT10B-00

—KFT12B-00

ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø2.5ø4ø5

ø7.5ø8ø9

ø2.5ø4ø5ø6

ø6.5ø7.5ø8ø9

ø4

ø6

ø8

ø10

ø12

ø4ø6

ø8

ø10

ø12

ø4ø6

ø8

ø10

ø12

Swivel Elbow Used to pipe tube at right angles to a female thread. Can be swiveled in any direction.

Union TeeUsed to pipe tubes in both 90 directions.

Straight UnionUsed to pipe tubes in the same direction.

Connec-tion

thread


O.D. I.D.

Model

Resin sleeve Brass sleeveR1/4R1/4R3/8

R1/4

R1/4

R1/4

KFF04B-02KFF06B-02KFF06B-03

—KFF08B-02

—KFF10B-02

—KFF12B-02

O.D. I.D.

Model

Resin sleeve Brass sleeveø2.5

ø4

ø5ø6

ø6.5ø7.5ø8ø9

ø4ø5ø6

ø6.5ø7.5ø8ø9

ø4

ø6

ø8

ø10

ø12

ø6

ø8

ø10

ø12

R1/4

R3/8

R3/8

R3/8

KFE06-02KFE08U-03KFE08N-03KFE10U-03KFE10N-03KFE12U-03KFE12N-03

KFE06B-02—

KFE08B-03—

KFE10B-03—

KFE12B-03

KFF Female ConnectorUsed to pipe tube from a male thread such as pressure gauge.

KFE Bulkhead Connector Used to pipe tube to a male thread.

KFF04-02KFF06-02KFF06-03KFF08U-02KFF08N-02KFF10U-02KFF10N-02KFF12U-02KFF12N-02

Connec-tion

thread


Connec-tion

thread


Insert Fittings Series KF

Fitti

ngs

& T

ubin

g


Insert Fittings

O.D. I.D.

Model


KFV04-01SKFV04-02SKFV06-01SKFV06-02SKFV06-03SKFV08U-01SKFV08U-02SKFV08U-03SKFV08N-01SKFV08N-02SKFV08N-03SKFV10U-02SKFV10U-03SKFV10U-04SKFV10N-02SKFV10N-03SKFV10N-04SKFV12U-02SKFV12U-03SKFV12U-04SKFV12N-02SKFV12N-03SKFV12N-04S

KFV04B-01SKFV04B-02SKFV06B-01SKFV06B-02SKFV06B-03S

———


———


———


O.D. I.D.



ø6ø6.5

KFH04-00KFH06-00KFH08U-00KFH08N-00KFH10U-00KFH10N-00KFH12U-00KFH12N-00

KFH04B-00KFH06B-00

—KFH08B-00

—KFH10B-00

—KFH12B-00

O.D. I.D.


Resin sleeve Brass sleeveKFT04-00KFT06-00KFT08U-00KFT08N-00KFT10U-00KFT10N-00KFT12U-00KFT12N-00

KFT04B-00KFT06B-00

—KFT08B-00

—KFT10B-00

—KFT12B-00

ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø2.5ø4ø5

ø7.5ø8ø9

ø2.5ø4ø5ø6

ø6.5ø7.5ø8ø9

ø4

ø6

ø8

ø10

ø12

ø4ø6

ø8

ø10

ø12

ø4ø6

ø8

ø10

ø12

Swivel Elbow Used to pipe tube at right angles to a female thread. Can be swiveled in any direction.

Union TeeUsed to pipe tubes in both 90 directions.

Straight UnionUsed to pipe tubes in the same direction.

Connec-tion

thread


O.D. I.D.

Model

Resin sleeve Brass sleeveR1/4R1/4R3/8

R1/4

R1/4

R1/4

KFF04B-02KFF06B-02KFF06B-03

—KFF08B-02

—KFF10B-02

—KFF12B-02

O.D. I.D.

Model

Resin sleeve Brass sleeveø2.5

ø4

ø5ø6

ø6.5ø7.5ø8ø9

ø4ø5ø6

ø6.5ø7.5ø8ø9

ø4

ø6

ø8

ø10

ø12

ø6

ø8

ø10

ø12

R1/4

R3/8

R3/8

R3/8

KFE06-02KFE08U-03KFE08N-03KFE10U-03KFE10N-03KFE12U-03KFE12N-03

KFE06B-02—

KFE08B-03—

KFE10B-03—

KFE12B-03

KFF Female ConnectorUsed to pipe tube from a male thread such as pressure gauge.

KFE Bulkhead Connector Used to pipe tube to a male thread.

KFF04-02KFF06-02KFF06-03KFF08U-02KFF08N-02KFF10U-02KFF10N-02KFF12U-02KFF12N-02

Connec-tion

thread


Connec-tion

thread


Insert Fittings

O.D. I.D.

Model


KFW04-01SKFW04-02SKFW06-01SKFW06-02SKFW06-03SKFW08U-01SKFW08U-02SKFW08U-03SKFW08N-01SKFW08N-02SKFW08N-03SKFW10U-02SKFW10U-03SKFW10U-04SKFW10N-02SKFW10N-03SKFW10N-04SKFW12U-02SKFW12U-03SKFW12U-04SKFW12N-02SKFW12N-03SKFW12N-04S

KFW04B-01SKFW04B-02SKFW06B-01SKFW06B-02SKFW06B-03S

———

KFW08B-01SKFW08B-02SKFW08B-03S

———


———


O.D. I.D.



ø2.5

ø4

ø5

ø6

ø6.5

ø7.5

ø8

ø9

ø2.5ø4ø5ø6

ø6.5ø7.5ø8ø9

ø4

ø6

ø8

ø10

ø12

ø4ø6

ø8

ø10

ø12

KFE04-00KFE06-00KFE08U-00KFE08N-00KFE10U-00KFE10N-00KFE12U-00KFE12N-00

KFE04B-00KFE06B-00

—KFE08B-00

—KFE10B-00

—KFE12B-00

Swivel Extended ElbowUsed to pipe tube at right angles to a female thread. Can be swiveledat any direction. Solid section moves fittings up above a workpiece.

Bulkhead UnionUsed to pipe tubes through a panel.

Connec-tion

thread


ø4ø6ø8

ø10ø12


KFP-04KFP-06KFP-08KFP-10KFP-12

PlugUsed to plug unused fittings.

Series M Miniature Fittings

Fittings & Tubing

1436

Miniature Fittings

Series M

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread : M3, M5, R1/8

Applicable tubing material

Max. operating pressure (at 20C)Connection sizeThread

Hose Nipple

Barb Fittings

Compact piping space.The hose nipple has a large holding force, allowing easy connection and removal.

A wide variety of models is available.Piping in the same direction is possible at different heights.

Hose nipple, Hose elbow.Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.

Nylon Soft nylon

M3, M5, R1/81.0MPa

JIS B0209 Class 2 (Metric thread), JIS B0203 (Taper thread for piping)

Polyurethane

ø4/ø2.5ø6/ø4

ø3.18/ø2.18 ø4/ø2.5ø6/ø4

ø2, ø3.18/ø2ø4/ø2.5, ø6/ø4

1.5MPa 0.8MPa

Tubing

Barb fittingsThe tube allows easy tubing insertion as well as secure tubing holding.

BodyWith electroless nickel plated

BodyWith electroless nickel plated

Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.

Cap nutSecure holding is achieved by manual tightening.Easy disconnection of tubing by loosening.Electroless nickel plated.

GasketSmall tightening torque.Secure sealing.

Barb fittingsThe tube allows easy tubing insertion as well as secure tubing holding.


Tubing

—M3

M5-R1/8

ø4/ø2.5 ø2, ø3.18/ø2, ø4/ø2.5

PAT.

Applicabletubing

ø2 Miniature FittingsSeries M

Miniature Fittings Series M

Fitti

ngs

& T

ubin

g


Miniature Fittings

Series M5

ModelDescriptionBarb fittings for nylon tubing

To pipe nylon tubing.

Application

M-5AN-4

M-5AN-6

Extension fitting For 3D piping to

prevent interference between fittings.

M-5J

Barb fittings for soft tubing

Barb elbow for nylon tubing

To pipe soft nylon tubing.

To pipepolyurethane tubing.



To pipe soft nylon, polyurethane tubing.

M-5AU-3

M-5AU-4

M-5AU-6

• To pipe nylon tubing• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.

M-5ALN-4

M-5ALN-6

Barb elbow for soft tubing

ModelDescription Application

To pipe soft nylon,polyurethane tubing.

Body rotates 360˚ around the stud axis. Position can be fixed after alignment.





Remark(s)

ø6/4 X M5

ø4/2.5 X M5ø4/2.5 X M5

ø3.18/2.18 X M5

ø3.18/2 X M5

ø3.18/2 X M5

ø4/2.5 X M5

ø6/4 X M5

ø4/2.5 X M5

ø6/4 X M5

ø3.18/2.18 X M5

ø6/4 X M5

ø4/2.5 X M5

M-5ALU-3

Barb elbow for nylon tubing (H)

Barb elbow for soft tubing (H)

• To pipe nylon tubing• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.

M-5ALHN-4

ø6/4 X M5 M-5ALHN-6

NippleTo connect fittings and equipment or to connect 2 fittings.

M-5N

Universal tee

M-5UT

Universal elbowBody rotates 360˚ around the stud axis. Position can be fixed after alignment.


M-5UL

TeePerpendicular piping in both directions.M-5T

Elbow

Perpendicular piping.M-5L

Hose elbow(H)

Hose elbow• To pipe nylon, soft nylon, polyurethane tubing.• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.

Hose nipple To pipe nylon, soft nylon, polyurethane tubing.

M-5H-4

ø6/4 X M5 M-5H-6

ø4/2.5 X M5 M-5HL-4

ø6/4 X M5 M-5HL-6

ø4/2.5 X M5 M-5HLH-4

ø6/4 X M5 M-5HLH-6

M-5ALU-6

ø4/2.5 X M5 M-5ALU-4

ø3.18/2 X M5

ø3.18/2.18 X M5

ø6/4 X M5

M-5ALHU-3

ø4/2.5 X M5 M-5ALHU-4

M-5ALHU-6

Remark(s)

M5 female X M5 femaleX M5 male

M5 male X M5 female

M5 male X M5 male

Universal nippleBody rotates 360˚ around the stud axis.M-5UN

M5 male X M5 male

PAT.

Bulkhead unionPanel mount connection

M-5EM5 X M5female – female

Bulkhead Reducer Reduction from Rc1/8 to M5. Panel mounting is possible.

M-5ERRc1/8 X M5 female

M5 female X M5 female X M5 female

M5 femaleX M5 male

M5 female X M5 female

Manifold Rc1/8 can be diverted in up to nine M5 stations. Panel mounting is possible.

M-5MRc1/8

X M5 female(9 port )

Gasket (H) M-5ALm-6M-5ALHm-6M-5HL-4, 6M-5HLH-4, 6.

M-5GH

Gasket

M5 thread labelMaterial:PVC

Material:Nylon 66.GF 30%

M-5G1

Plug To plug unused M5 port.

Bushing

M-5B

M-5P

Connection from R1/8 piping to M5 fittings.

R1/8 X M5 female

M-5AU-2To pipepolyurethane tubing.ø2/1.2 X M5

To pipepolyurethane tubing.M-5ALHU-2ø2/1.2 X M5

M-3ALU-2ø2/1.2 X M3

M-5ALHU-2ø2/1.2 X M5

Series M Miniature Fittings

Fittings & Tubing

1438

Miniature Fittings

Series M3 Series R1/8

ModelDescription



Application



M-3AU-3

M-3AU-4


Universal elbow




M-3ALU-3

M-3ALU-4



M-3UL

Universal tee

ModelDescription ApplicationRemark(s)

ø3.18/2.18X M3

ø3.18/2 X M3

ø4/2.5 X M3

ø3.18/2.18X M3

ø3.18/2 X M3

ø4/2.5 X M3

M3 femaleX M3 male

M3 maleX M3 male

M3 female X M3 femaleX M3 male

M-3UT


M-3N

PlugTo plug unused M3 port.M-3P

GasketSealant (Thread portion)M-3G

M-04R-2

Plug-in reducer

To pipe polyurethane tubing.

M-32R-2

M-01AU-6



M-01AU-4

Barb fittings for nylon tubing

To pipe nylon tubing.

M-01AN-4

Remark(s)

ø4/2.5 X R1/8

M-01AN-6ø6/4 X R1/8

ø4/2.5 X R1/8

ø6/4 X R1/8

ø2/1.2 X 3.2 mm

ø2/1.2 X 4 mm


M-3AU-2ø2/1.2 X M3To pipepolyurethane tubing.

M-3ALU-2ø2/1.2 X M3To pipepolyurethane tubing.

M-01H-6

Hose nipple

To pipe nylon, soft nylon, polyurethane tubing.

M-01H-4ø4/2.5 X R1/8

ø6/4 X R1/8

M-04F-2

Hose nipple

To pipe polyurethane tubing.

M-32F-2ø2/1.2

X 3.2 mmone-touch

ø2/1.2 X 4 mmone-touch

MaterialPVC

Self Align Fittings Series H, DL, L, LL

Fitti

ngs

& T

ubin

g


Self Align Fittings

Series H, DL, L, LL

Specifications

Features

Main Parts Material

Prevents tubing from deforming inwards.

Prevents tubing sliding during installation.The tubing holding mechanism gives the strong feeling when inserting the tubing and prevents the tubing from sliding when screwing in the tubing.

Flared inside diameter

Tubing holder

Large holding force by metal ferrule.Applicable to soft copper.(Not applicable to urethane tubing.)

Ferrule

Body

Union nut

Tubing

PAT.




Proof pressure

Fluid

Sealant (Thread portion) Note)

Nylon tubing, Soft nylon tubing, Soft copper tubing (C1220T-O)

ø4, ø6, ø8, ø10, ø12

1.0MPa

10MPa

Air

JIS B 0203 (Taper thread for piping)

JIS B 0211 Class 2 (Metric fine thread)

None or with sealant

Thread portionNut part

Body

Nut

Ferrule

C3604BD, C3771BE

C3604BD

C2700T

Thread

Ferrule with no orientation.The non-oriented construction is free from mistakes and consequent working loss or accidents when inserting the ferrule into the fitting body are reduced.

Hardened ridge ferrule.The single bite construction with a strong ridge prevents breakage of ferrule when tightening.

Small pressure loss.A large flow rate is achieved with small flow resistance due to the construction without an insert.

Wide variety of styles and sizes.10 models including swivel styles and 5 tubing O.D. provide a wide range of fittings that will fit any application.

Note) The male elbow, male branch tee and service tee union with sealant are manufactured upon receipt of order.


Series H, DL, L, LL Self Align Fittings

Fittings & Tubing

1440

Self Align Fittings

H Male Connector L Swivel Elbow

4

6

8

10

12

H04-01 -02H06-01 -02 -03H08-01 -02 -03H10-02 -03 -04H12-02 -03 -04


Applicable tubingmm

Connecting thread

Model

4

6

8

10

12

L04-01 -02L06-01 -02 -03L08-01 -02 -03L10-02 -03 -04L12-02 -03 -04

To pipe from the female threaded at the right angle.Swiveled at any direction.

4

6

8

10

12

DL04-01 -02DL06-01

-02 -03DL08-01

-02 -03DL10-02

-03 -04DL12-02

-03 -04


4

6

8

10

12

LL04-01 -02LL06-01

-02 -03LL08-01

-02 -03LL10-02

-03 -04LL12-02

-03 -04

To pipe from the female threaded at a right angle.Swiveled at any direction. Solid piece moves fittings up from work piece.

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

Applicable tubingmm


Applicable tubingmm


Applicable tubingmm


DL Male Elbow LL Swivel Extended Elbow

Self Align Fittings Series H, DL, L, LL

Fitti

ngs

& T

ubin

g


Self Align Fittings

DT Male Branch Tee DT Union Tee

4

6

8

10

12

DT04-01 -02DT06-01

-02 -03DT08-01

-02 -03DT10-02

-03 -04DT12-02

-03 -04


4

6

8

10

12

DY04-01 -02DY06-01 -02 -03DY08-01 -02 -03DY10-02 -03 -04DY12-02 -03 -04


468

1012

DE04-00DE06-00DE08-00DE10-00DE12-00


4681012

DT04-00DT06-00DT08-00DT10-00DT12-00


4

6

81012

DHF04-02DHF06-02

-03DHF08-02DHF10-02DHF12-02


681012

DEF06-02DEF08-03DEF10-03DEF12-03


ø4ø6ø8ø10ø12

DP-04DP-06DP-08DP-10DP-12

To plug unused self-align fittings.


Model

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

Rc1/4Rc3/8Rc3/8Rc3/8

Rc1/4Rc1/4Rc3/8Rc1/4Rc1/4Rc1/4

Applicable tubing

mm


Applicable tubing

mm


Applicable tubing mm

Model

Applicable tubing

mm


Applicable tubing

mm


Applicable tubing mm Model

DHF Female Connector

DEF Bulkhead Female Connector

DP Plug

DY Male Run Tee

DE Bulkhead Union

Series KC Self - sealing fittings

Fittings & Tubing

1442

Self - sealing fittings

Applicable Tubing

Series KC

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: M, R, Rc

Fluid


Proof pressure


Thread label (Standard)

Copper-free specifications (Standard)

Air

1.0MPa

3.0MPa




With sealant

All brass parts with electroless nickel plated.

MountingNut

Tubing material

Tubing O.D.


ø4, ø6, ø8, ø10, ø12

Thread

Built-in self seal mechanism.No air leakage even when the tubing is removed.

Effective for piping in confined space.The body and thread portion rotate separately.

No need of a sealant tape.Stud

Body

Guide

CushionStopper

O-ringRetainer

Spring

Valve

Release button

ColletChuck

With sealant

O-ring

Tubing

One-touch fitting with built-in self seal mechanism to prevent air exhaust when removing the tubing.

Electroless nickel plated for copper-free applications.

Without tubing With tubing

PAT.

Self - sealing fittings Series KC

Fitti

ngs

& T

ubin

g

1443

FOR MORE DETAILSSEE OUR SPECIFIC CATALOGUES,PRODUCTS CD´s OR ONLINE INFORMATION

KCH Male Connector

Tube Coupler

KCE Bulkhead Union

4

6

8

10

12

M5

M5

KCH04-M5 -01S

KCH06-M5 -01S -02SKCH08-01S

-02S -03SKCH10-02S

-03SKCH12-03S

-04S

For piping in the same direction from the female thread.

To pipe from the female thread at the right angle.


mm

4

6

8

10

12

Connecting thread

M5

M5


mm


KCL04-M5 -01S

KCL06-M5 -01S -02S

KCL08-01S -02S -03S

KCL10-02S -03S

KCL12-03S -04S

To connect tubing through a panel.One of 2 ports has a check valve.


4681012

KCE04-00KCE06-00KCE08-00KCE10-00KCE12-00

Model

Model



4681012

KCT04-00KCT06-00KCT08-00KCT10-00KCT12-00

Model

To branch tubing in the same direction. Only branches have integral check valves.


468

1012

KCU04-00KCU06-00KCU08-00KCU10-00KCU12-00

Model

To connect tubing in the same direction. One of 2 ports has a check valve.


468

1012

KCH04-00KCH06-00KCH08-00KCH10-00KCH12-00

Model

To be connected to a series KQ one-touch fitting to provide tube coupler function.


4681012

KCJ04-99KCJ06-99KCJ08-99KCJ10-99KCJ12-99

Model

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

KCT Union Tee

KCL Male Elbow

KCH Straight Union

KCU Union “Y”

KCJ Check Adaptor

Series KC Self - sealing fittings

Fittings & Tubing

1444

Tube Coupler

468

1012

KCH04-99KCH06-99KCH08-99KCH10-99KCH12-99

To save tube cutting labor in cases where tubing is frequently connected and removed.To connect tubing in the same direction as the tube coupler.


Model

4681012

KCL04-99KCL06-99KCL08-99KCL10-99KCL12-99

To save tube cutting labor in cases where tubing is frequently connected and removed.To connect a tubing at a right angle to the tube coupler.


Model

468

1012

KCE04-02KCE06-02KCE08-03KCE10-03KCE12-03



mmModelConnecting

thread

1/41/43/83/83/8

KCH Straight Plug for Frequent Use KCE Bulkhead Female Union

KCL Elbow Plug for Frequent Use

Multi-Connector with One-Touch Fittings Series DMK

Fitti

ngs

& T

ubin

g

1445


With cover

Multi-Connector with One-Touch Fittings

Series DMK

Specifications

Features

Applicable tubing O.D.: Metric Size No. of connecting tubing: 6 or12



Fluid




ø3.2, 4

Air

1.0MPa


With one-touch fitting.Applicable to nylon, soft nylon and polyurethane tubing.

Installation processes are considerably reduced.Simpler installation and less labour compared with use of numerous bulkhead unions for panel mounting.

Secure tubing retention.Tubing can be firmly connected to the multiconnector in one-step operation (with one-touch fitting).

No. of connecting tubesTwo types, with 6 and 12 connecting tubing, are available.

6

ModelApplicable

tubingO.D. mm

No. ofconnecting

tubingMulti-

connector Plug side Socketside

12

DMK6

DMK12

ModelApplicable

tubingO.D. mm

No. ofconnecting

tubingMulti-

connector Plug side Socketside

046

3.2mm4mm

2304

Tubing O.D.

612

612

No. of connecting tubing

Multi connectorPlug side

Socket side

—PS

Configuration

Accessories (Optional)Nil

Single side cover (1 pc.)Both sides cover (2 pcs.)

-C1C2

DMKHow to Order

SocketSocket case

U-ringSecure sealing.

Plug casePlug

The protrusion and recession on both surfaces can be fit for engagement at the prescribed position.

Clamp ringConnects the socket and plug.

PlateSpacer

Cover

Holder

PAT.

3.2

4

DMK6-23

DMK6-04

DMK6P-23

DMK6P-04

DMK6S-23

DMK6S-04

DMK12-23

DMK12-04

DMK12P-23

DMK12P-04

DMK12S-23

DMK12S-04

3.2

4

Series KDM Rectangular Multi-Connector

Fittings & Tubing

1446

Rectangular Multi-Connector

Applicable Tubing

Series KDM

Specifications

Features

Applicable tubing O.D.: Metric Size No. of connecting tubing: 10 or 20

Fluid



Proof pressure


Air

1.0MPa

–100kPa

1.5MPa


Tubing material

Tubing O.D.


ø3.2, ø4, ø6, ø8

Substantial reduction of mounting space.Requires less installation space compared with use of numerous bulkhead unions for panel mounting.

One-touch installation and removal of connector.Numbers of pipes can be connected and disconnected instantly without connection errors, saving substantial labour in installation.

One-touch tubing connection.One-touch fittings substantially cut down man hours for piping.

Plug caseEngagement in the prescribed position can be achieved by fitting both surfaces.

With one-touch fittingTubing of different diameters can be used together.Metric size ø3.2, ø4, ø6, ø8For application requiring copper-free material (Electroless nickel plated)Two types, with 10 and 20 connecting tubing are available.

PackingCompatible with vacuum of -100kPa to 1 MPa

Clamp bolt

Panel mounting bracket (Standardized)Mounting only requires operation on the panel front. No need to make mounting screw holes. (Allows up to 5 mm of panel thickness) Plug connector

Socket connector

Plate

Screw for bracketE type snap ring

Socket casePAT.PEND

3.2468

KDM10-23 -04 -06 -08

No. of connecting

tubing

10


mmModel

3.2468

KDM20-23 -04 -06 -08

No. of connecting

tubing

20


mmModel

KDM10

KDM20

Flame Resistant One-Touch Fittings Series KR

Fitti

ngs

& T

ubin

g


Flame Resistant One-Touch Fittings

Applicable Tubing

Series KR

Specifications

Features


Push-in collet type

For flame resistant soft nylon tube

ø6, ø8, ø10, ø12mm tube

Sealant on threaded portion

For air and water, vacuum or pressure applications

Low disconnecting force (prevents biting)

Flame resistance equivalent to UL-94 standard V-0

ChuckApplicable to soft nylon.Large retaining force.Secure engagement with chuck and large retaining force with collet.

Compatible with a wide range of pressure, from low vacuum to 1.0 MPa.The special shape ensures sealing and reduces resistance of tubing insertion.

Series KR: Black body.Requires little force for removal.Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.

Effective for piping in confined space.The body and thread portion can be rotated. (For positioning)

Packing

Stud

Release button

O-ringBody

Tubing

Prevents releasing of the tubing due to spatter invasion or adhesion.

Cover (Option)

No need of a sealant tape.

With sealant

ColletGuide

PAT.

Series KR: Black body.Series KR-W2: White Body - See Best Pneumatics

Fluid


Proof pressure


Thread


Air, Water Note1)

1.0MPa

3.0MPa




With sealant (Standard)

MountingNut


Tubing material

Tubing O.D.

Flame resistant double layer, flame resistant soft nylon

ø6, ø8, ø10, ø12

Series KR Flame Resistant One-Touch Fittings

Fittings & Tubing

1448


KRH Male Connector KRK 45˚ Male Elbow

6

8

10

12

KRH06-01S -02S -03SKRH08-01S

-02S -03SKRH10-01S

-02S -03S -04SKRH12-02S

-03S -04S




mm

6

8

10

12

Connecting thread


mmConnecting

thread

Model

KRL06-01S -02S -03S

KRL08-01S -02S -03S

KRL10-01S -02S -03S -04S

KRL12-02S -03S -04S

KRH( )

For piping at 45˚ from female thread.Intermediate model between male connector and male elbow.


mm

6

8

10

12

Connecting thread

KRK06-01S -02S -03S

KRK08-01S -02S -03S

KRK10-01S -02S -03S -04S

KRK12-02S -03S -04S

Model

KRL(Black)

Model

KRK (Black)



mm

6

8

10

12

Connecting thread

KRW06-01S -02S -03SKRW08-01S

-02S -03SKRW10-02S

-03S -04SKRW12-02S

-03S -04S

Model

KRW(Black)



mm

6

8

10

12

Connecting thread

KRV06-01S -02SKRV08-01S

-02S -03SKRV10-02S

-03SKRV12-03S

-04S

Model

KRV(Black)

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

Release button,Green

KRL Male Elbow KRW Extended Male Elbow

KRV Universal Male Elbow

6

8

10

12



mm

Model

KRE-W2 (White)

KRE06-01W2 -02W2 -03W2

KRE08-01W2 -02W2 -03W2

KRE10-02W2 -03W2

KRE12-02W2 -03W2 -04W2

Connecting thread

Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2


KRE-W2 Bulkhead Female Union

Flame Resistant One-Touch Fittings Series KR

Fitti

ngs

& T

ubin

g



KRT Branch Tee KRU Union “Y”

6

8

10

12

KRT06-01S -02S -03S

KRT08-01S -02S -03S

KRT10-01S -02S -03S -04S

KRT12-02S -03S -04S




mm

6

8

10

12

Connecting thread


mm

Connecting thread

Model

KRY06-01S -02S -03S

KRY08-01S -02S -03S

KRY10-01S -02S -03S -04S

KRY12-02S -03S -04S

KRT (Black)



mm

6

8

10

12

Connecting thread

KRU06-01S -02S -03S

KRU08-01S -02S -03S

KRU10-02S -03S -04S

KRU12-02S -03S -04S

Model

KRY (Black)

Model

KRU(Black)



68

1012

KRH06-00KRH08-00KRH10-00KRH12-00

Model

KRH (Black)



681012

KRE06-00KRE08-00KRE10-00KRE12-00

Model

KRE( )



681012

KRL06-00KRL08-00KRL10-00KRL12-00

Model

KRL (Black)

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2

Release button,Green

KRY Male Run Tee KRH Straight Union

KRE Bulkhead Union

KRL Union Elbow

Series KR Flame Resistant One-Touch Fittings

Fittings & Tubing

1450


KRT Union Tee KRP Plug

68

1012

KRT06-00KRT08-00KRT10-00KRT12-00




681012


Model

KRU06-00KRU08-00KRU10-00KRU12-00

KRT (Black)

To plug unused one-touch fittings.

68

1012

KRP-06KRP-08KRP-10KRP-12

Model

KRU (Black)

Model



mm

Fitting size

Fitting size

6

8

10

810101212

KRR06-08 -10

KRR08-10 -12

KRR10-12

Model

KRR (Black)



mm

Fitting size

68

1012

681012

KRU06-99KRU08-99KRU10-99KRU12-99

Model

KRU (Black)

Prevents releasing of the tubing due to spatter invasion or adhesion.KR (Applicable tubing: FR soft nylon)

681012

KR-06CKR-08CKR-10CKR-12C

ModelFitting size

Prevents releasing of the tubing due to spatter invasion or adhesion.KR (Applicable tubing: FR soft nylon, FR2 layer)

681012

KR-06C1KR-08C1KR-10C1KR-12C1

ModelFitting size

KRU Union “Y” KR Spatter Cover 1

KRR Plug-In Reducer

KRU Plug-In “Y”

KR Spatter Cover 2

Flame Resistant One-Touch Fitting Manifold Series KRM

Fitti

ngs

& T

ubin

g


Flame Resistant One-Touch Fitting Manifold

Applicable Tubing

Series KRM

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: Rc

Tubing material

Tubing O.D.

FR double layer, FR soft nylon

ø6, ø8, ø10, ø12

One-touch tubing manifold.

Flame resistance equivalent to UL-94 standard V-0.

6-10 outlets.

For air and water.

For vacuum or pressure applications.

Model

Fluid


Proof pressure


ThreadAccessory

Air, Water Note 1)

1.0MPa

3.0MPa

–5 to 60˚C,In case of water: 0 to 60˚C (With no condensation)

Note 1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.

Port AConnection size

Number of port A

PortingPort A Port B

Model

KRM11

KRM12

One-touch fitting

One-touch fitting

One-touch fitting

Rc female thread

6, 10

6, 10

ø6 tubing

ø8 tubing

ø6 tubing

ø8 tubing

Port BConnection size

ø10 tubing

ø12 tubing

Rc1/4

Rc3/8


Hexagon socket head plug: 1 pc

—

None

KRM12KRM11

Model

KRM11 KRM12

Construction

Series KRM Flame Resistant One-Touch Fitting Manifold

Fittings & Tubing

1452

Flame Resistant One-Touch Fittings Manifold

KRM11

KRM12

6

A

8

10

B

12

6106

10

KRM11-06-10-6 -10

KRM11-08-12-6 -10

Connectionthread

Applicable tubing O.D. mm Numberof port A

ModelA

B

6

8

610610

KRMC-06-6 -10

KRMC-08-6 -10


mmN Model

6

8

6106

10

KRM12-06-02-6 -10

KRM12-08-03-6 -10


mm

Numberof port A

ModelAA

Rc1/4

Rc3/8

KRMC (Applicable tubing: FR soft nylon)

KRMC Spatter Cover 3

Stainless Steel One-Touch Fittings Series KG

Fitti

ngs

& T

ubin

g

1453


Stainless Steel One-Touch Fittings

Applicable Tubing

Series KG

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: M5, R, Rc

Tubing material

Tubing O.D.


ø4, ø6, ø8, ø10, ø12, ø16

Stainless steel specification compatible with corrosive environment.

303 stainless steel used for metal parts.

Suitable for use in CRT production lines for copper free environment,for food processing machine washing to endure water or salt splashes and for use in clean rooms to prevent particle generation resulting from corrosion.

Tube sizes Ø4 - 16mm

Fluid



Proof pressure


Thread


Air, Water Note1)

1.0MPa

–100kPa

3.0MPa




With / Without sealant Note2)

MountingNut

Note1) Applicable to general industrial water. Consult SMC if using for other fluids. Surge pressure must be under the maximum operating pressure.Note2) Suffix "S" to part number if sealant is desired.

PAT.

ChuckApplicable to nylon and polyurethane.Large retaining force.Secure engagement with chuck and large retaining force with collet.

Compatible with a wide rangeof pressure, from low vacuum to 1.0MPa.The special shape ensures sealing and reduces resistance in tubing insertion.

Requires little force for removal.Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.

Effective for piping in confined space.The body and thread portion can be rotated.

Packing

Stud

Release button (White)

O-ringBody (White)Tubing

ColletGuide

Series KG Stainless Steel One-Touch Fittings

Fittings & Tubing

1454

KGH Male Connector


KGL Male Elbow

4

6

8

10

12

16

M5

M5

KGH04-M5 -01 -02KGH06-M5 -01 -02 -03KGH08-01 -02 -03KGH10-01 -02 -03 -04KGH12-02 -03 -04KGH16-03 -04


<M5>

<R>

The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space.

<M5>

<R>


mm

4

6

8

10

12

Connecting thread

M5

M5


mm


KGS04-M5 -01KGS06-M5 -01 -02KGS08-01 -02 -03KGS10-01 -02 -03 -04KGS12-02 -03 -04


<M5>

<R>


<M5>

<R>


mmM5

M5

4

6

8

10

12

16

Connecting thread

KGL04-M5 -01 -02KGL06-M5 -01 -02 -03KGL08-01 -02 -03KGL10-01 -02 -03 -04KGL12-02 -03 -04KGL16-03 -04


mm

Connecting thread

4M5

M5

6

8

10

12

KGW04-M5 -01 -02KGW06-M5 -01 -02 -03KGW08-01 -02 -03KGW10-02 -03 -04KGW12-02 -03 -04

Model

Model

Model

R1/8R1/4


R1/8R1/4


R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8

R1/8R1/4R1/8R1/4R3/8R1/8R1/4R3/8R1/2R1/4R3/8R1/2

KGS Hex. Socket Head Male Connector KGW Extended Male Elbow

To plug unused tubing.


468

101216

KGC04-00KGC06-00KGC08-00KGC10-00KGC12-00KGC16-00

Model

KGC Tubing CapTo change the tubing direction from a one-touch fitting by 90.


mm4681012

Fitting size

468

1012

KGL04-99KGL06-99KGL08-99KGL10-99KGL12-99

Model

KGL Plugin Elbow


Fitti

ngs

& T

ubin

g

1455


KGV Universal Male Elbow


KGY Male Run Tee

KGT Male Branch Tee

KGU Union “Y”

4

6

8

10

12

M5

M5

KGV04-M5 -01KGV06-M5 -01 -02KGV08-01

-02 -03KGV10-02

-03KGV12-03

-04


<M5>

<R>


<M5>

<R>


mm

4

6

8

10

12

16

Connecting thread

M5

M5


mmConnecting

threadModel

KGT04-M5 -01 -02KGT06-M5 -01 -02 -03KGT08-01

-02 -03KGT10-01

-02 -03 -04KGT12-02

-03 -04KGT16-03

-04


<M5>

<R>


<M5>

<R>


mmM5

M5

4

6

8

10

12

16

Connecting thread

KGY04-M5 -01 -02KGY06-M5 -01 -02 -03KGY08-01

-02 -03KGY10-01

-02 -03 -04KGY12-02

-03 -04KGY16-03

-04


mm

Connecting thread

4M5

M5

6

8

10

12

KGU04-M5 -01 -02KGU06-M5 -01 -02 -03KGU08-01

-02 -03KGU10-02

-03 -04KGU12-02

-03 -04

Model

Model

Model

R1/8

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

R1/8R1/4


R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4




mm

4

6

8

10

12

Fitting size

68

1048

10121012121616

KGR04-06 -08 -10KGR06-04 -08 -10 -12KGR08-10 -12KGR10-12 -16KGR12-16

Model

KGR Plug-In Reducer

Series KG Stainless Steel One-Touch Fittings

Fittings & Tubing

1456

KGLU Male Branch Connector


KGUD Double Branch

KGD Delta Union

KGH Straight Union

4

6

8

10

12

M5

M5

KGLU04-M5 -01 -02KGLU06-M5 -01 -02 -03KGLU08-01 -02 -03KGLU10-02 -03 -04KGLU12-02 -03 -04

To branch the line from the female thread at a right angle.

<M5>

<R>

To branch the line from the female thread into 4 tubes in the same direction.


mm

4

6

Connecting thread


mmConnecting

threadModel

KGUD04-01 -02KGUD06-01 -02


To branch the line from the female thread into 2 directions at right angles.

<M5>

<R>


mmM5

M5

4

6

8

10

12

Connecting thread

KGD04-M5 -01 -02KGD06-M5 -01 -02 -03KGD08-01 -02 -03KGD10-02 -03 -04KGD12-02 -03 -04

Applicable tubingO.D. mm

4681012

KGH04-00KGH06-00KGH08-00KGH10-00KGH12-00

Model

Model

Model


Applicable tubingO.D.mm

468

101216

KGE04-00KGE06-00KGE08-00KGE10-00KGE12-00KGE16-00

Model

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

R1/8R1/4R1/8R1/4

R1/8R1/4

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

KGE Bulkhead UnionKGL Union Elbow



468

101216

KGL04-00KGL06-00KGL08-00KGL10-00KGL12-00KGL16-00

Model



468101216

KGT04-00KGT06-00KGT08-00KGT10-00KGT12-00KGT16-00

ModelTo branch tubing in the same direction.


468

1012

KGU04-00KGU06-00KGU08-00KGU10-00KGU12-00

Model

KGT Union TeeKGU Union “Y”


Fitti

ngs

& T

ubin

g

1457


KGH Different Dia. Straight


KGLU Branch Union Elbow

KGT Different Dia. Tee

KGU Different Dia. Union “Y”To branch a tube at a right angle into two tubes.


468

1012

KGLU04-00KGLU06-00KGLU08-00KGLU10-00KGLU12-00

Model



KGH04-06KGH06-08KGH08-10KGH10-12

Modela468

10

b68

1012

To branch the tubing into two at a right angle and reduce the resulting branches in size.


KGT04-06KGT06-08KGT08-10KGT10-12

Modela468

10

b68

1012



KGU04-06KGU06-08KGU08-10KGU10-12

Modela46810

b68

1012



KGUD04-06KGUD06-08

Modela46

b68

a b

4- a

b

2- a b

2- a

b

KGUD Different Dia. Double Union “Y”



mm

4

6

8

10

12

Connecting thread

KGF04-01 -02KGF06-01 -02 -03KGF08-01 -02 -03KGF10-02 -03KGF12-02 -03 -04

Model

Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/4Rc3/8Rc1/2

KGF Female Connector



mm

4

6

8

10

12

16

Connecting thread

KGE04-01 -02KGE06-01 -02 -03KGE08-01 -02 -03KGE10-02 -03KGE12-03 -04KGE16-03 -04

Model

Rc1/8Rc1/4Rc1/8Rc1/4Rc3/8Rc1/8Rc1/4Rc3/8Rc1/4Rc3/8Rc3/8Rc1/2Rc3/8Rc1/2

KGE Bulkhead Female Connector

To connect 3 tubes at right angles with each other.


468

1012

KGD04-00KGD06-00KGD08-00KGD10-00KGD12-00

Model

KGD Delta Union

Series KQG Stainless Steel 316 One-Touch Fittings

Fittings & Tubing

1458

Stainless Steel 316 One-Touch Fittings

Series KQG316 Stainless Steel one-touch fittings.

Grease free with FKM seals.

Suitable for air, water or steam up to 150˚C.

Wide variety of tubing can be used.

Optional inner sleeve for softer tubing.

Features

Tubingmaterial

Tubing O.D.

FEP, PFA, Nylon, Soft nylon, Polyurethane, Polyolefin

ø4, ø6, ø8, ø10, ø12

Applicable Tubing

Optional Inner Sleeves

Construction

How to OrderSee part number listing on next page.

No.123456789

DescriptionRelease bushingGuideChuckSealMale connector bodyMale elbow bodyO-ringStopper ringStud

Stainless steel 316Stainless steel 316Stainless steel 316

Special FKMStainless steel 316Stainless steel 316

Special FKMStainless steel 316Stainless steel 316

Material

Tube size

040204250403060408050806106510751008120812091210

TJ-0402TJ-0425TJ-0403TJ-0604TJ-0805TJ-0806TJ-1065TJ-1075

TJ-1208

TJ-1209TJ-1210

Tubing model (Material)

TU(Polyurethane)

TUS(Soft polyurethane)

TH(FEP)

TL(PFA)

Applicable inner sleeve

Model

1818181920.520.52323

24

2424

Length

Operating fluid

Operating pressure range Note 1)

Proof pressure

Ambient and Operating fluid temperature Note 2)

Lubricant

Seal on the threads

Air, Water, Steam Note 4)

–100 kPa to 1MPa

3.0 MPa


Grease-free specification

With sealantNote 1) Please avoid using in a vacuum holding application such as a leak tester, since there is leakage. Note 2) When using at 120°C or higher, for an extended period of time, we recommend that an inner sleeve be

used. Note 3) In the event of using polyurethane tubing, we recommend the use of an inner sleeve in cases where the

tubing is strained.Note 4) Special FKM that is resistant even when steam is used.

Specifications

Stainless Steel 316 One-Touch Fittings Series KQG

Fitti

ngs

& T

ubin

g


Applicable tubingO.D. (mm)

Connectionthread Model

M5R1/8M5

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

KQGH04-M5KQGH04-01SKQGH06-M5KQGH06-01SKQGH06-02SKQGH08-01SKQGH08-02SKQGH08-03SKQGH10-02SKQGH10-03SKQGH12-03SKQGH12-04S

ø4

ø6

ø8

ø10

ø12



M5R1/8M5

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

KQGT04-M5KQGT04-01SKQGT06-M5KQGT06-01SKQGT06-02SKQGT08-01SKQGT08-02SKQGT08-03SKQGT10-02SKQGT10-03SKQGT12-03SKQGT12-04S

ø4

ø6

ø8

ø10

ø12

Applicable tubing O.D. (mm) ModelKQGH04-00KQGH06-00KQGH08-00KQGH10-00KQGH12-00

ø4ø6ø8ø10ø12

Applicable tubing O.D. (mm) ModelKQGT04-00KQGT06-00KQGT08-00KQGT10-00KQGT12-00

ø4ø6ø8

ø10ø12

Applicable tubing O.D. (mm) ModelKQGU04-00KQGU06-00KQGU08-00KQGU10-00KQGU12-00

ø4ø6ø8ø10ø12



M5R1/8M5

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

KQGL04-M5KQGL04-01SKQGL06-M5KQGL06-01SKQGL06-02SKQGL08-01SKQGL08-02SKQGL08-03SKQGL10-02SKQGL10-03SKQGL12-03SKQGL12-04S

ø4

ø6

ø8

ø10

ø12



M5R1/8M5

R1/8R1/4R1/8R1/4R3/8R1/4R3/8R3/8R1/2

KQGS04-M5KQGS04-01SKQGS06-M5KQGS06-01SKQGS06-02SKQGS08-01SKQGS08-02SKQGS08-03SKQGS10-02SKQGS10-03SKQGS12-03SKQGS12-04S

ø4

ø6

ø8

ø10

ø12

Applicable tubing O.D. (mm) ModelKQGL04-00KQGL06-00KQGL08-00KQGL10-00KQGL12-00

ø4ø6ø8ø10ø12

Applicable tubing O.D. (mm) ModelKQGE04-00KQGE06-00KQGE08-00KQGE10-00KQGE12-00

ø4ø6ø8ø10ø12

KQGT Male Branch Tee

KQGH Straight Union

KQGT Union Tee

KQGU Union “Y”

KQGL Male Elbow

KQGS Hexagon Socket Head Male Connector

KQGL Union Elbow

KQGE Bulkhead Union

KQGH Male Connector

Series KFG Stainless Steel 316 Insert Fittings

Fittings & Tubing

1460

Specifications

Stainless Steel 316 Insert Fittings

Series KFGFeatures

Operating fluid

Operating pressure range Note 1)

Proof pressure

Ambient and Operating fluid temperature Note 2)

Lubricant

Seal on the threads

Air, Water, Steam

–100 kPa to 1MPa

3.0 MPa


Grease-free specification

With sealant

Material: Stainless Steel 316.

Operating fluid temperature –5 to 150°C.

Applicable tubing material: FEP, PFA, Nylon,

Soft nylon, Polyurethane, Polyolefin

Can be used with steam.

Grease-free.

Applicable tubing

Series Tubing O.D.

THTLTTSTUTPHTPS

Tubing O.D. x I.D.

ø4 x ø2,5 ø6 x ø4 ø8 x ø6 ø10 x ø7,5 ø12 x ø9FEPPFA

NylonSoft nylon

PolyurethanePolyolefin

Soft polyolefin

The insert mechanismprovides a reliable retaining force on the tube.

Fastens lightly.Adhesion or bindingalso prevented.

Sleeve

Union nut

Guide

Body

Prevents the tube from disconnecting during piping.

Tube can be connected without fully removing the nut.

Stainless Steel 316 Insert Fittings Series KFG

Fitti

ngs

& T

ubin

g


Male Connector: KFGH Male Branch Tee: KFGT

Male Elbow: KFGL

O.D. I.D.

Connectionthread

R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

KFGH0425-01SKFGH0425-02SKFGH0604-01SKFGH0604-02SKFGH0806-01SKFGH0806-02SKFGH0806-03SKFGH1075-02SKFGH1075-03SKFGH1075-04SKFGH1209-02SKFGH1209-03SKFGH1209-04S

ø2.5

ø4

ø6

ø7.5

ø9

ø4

ø6

ø8

ø10

ø12

Applicabletubing size Model

Applicabletubing size

O.D. I.D.

Connectionthread

R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

KFGT0425-01SKFGT0425-02SKFGT0604-01SKFGT0604-02SKFGT0806-01SKFGT0806-02SKFGT0806-03SKFGT1075-02SKFGT1075-03SKFGT1075-04SKFGT1209-02SKFGT1209-03SKFGT1209-04S

ø2.5

ø4

ø6

ø7.5

ø9

ø4

ø6

ø8

ø10

ø12

Model

O.D. I.D.


R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R1/4R3/8R1/2

KFGL0425-01SKFGL0425-02SKFGL0604-01SKFGL0604-02SKFGL0806-01SKFGL0806-02SKFGL0806-03SKFGL1075-02SKFGL1075-03SKFGL1075-04SKFGL1209-02SKFGL1209-03SKFGL1209-04S

ø2.5

ø4

ø6

ø7.5

ø9

ø4

ø6

ø8

ø10

ø12

Applicabletubing size

Straight Union: KFGH

Applicable tubing sizeO.D. I.D.

ø2.5ø4ø6

ø7.5ø9

KFGH0425-00KFGH0604-00KFGH0806-00KFGH1075-00KFGH1209-00

ø4ø6ø8

ø10ø12

Applicable tubing sizeO.D. I.D.

ø2.5ø4ø6

ø7.5ø9

KFGT0425-00KFGT0604-00KFGT0806-00KFGT1075-00KFGT1209-00

ø4ø6ø8

ø10ø12

Model

Model

Union Tee: KFGT



To branch the line from the female thread at 90° in each direction.


To branch tubing into 2 directions each at 90° to the original one.

Series MS Stainless Steel Miniature Fittings

Fittings & Tubing

1462

Stainless Steel Miniature Fittings

Series MS

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread : M5


Applicable tubing diameter

Max. operating pressure (At 20˚C)

Connection size

Material

Hose Nipple

Barb Fittings

Can be used in corrosive applications.

Stainless steel material (SUS316).



Hose Nipple, Hose elbow.Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.

Nylon Soft nylon

M5(JIS B0209, Class 2: Metric coarse thread)

1.0MPa

SUS316SUS 304, Aluminium

Polyurethane

ø4/ø2.5ø6/ø4

ø3.18/ø2.18 ø4/ø2.5ø6/ø4

ø3.18/ø2ø4/ø2.5, ø6/ø4

1.5MPa 0.8MPa

Body

Gasket

BarbThe tube allows easy tubing insertion as well as secure tubing holding.

BodyStainless steel 316


TubingHose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.

Cap nutSecure holding is achieved by manual tightening.Easy disconnection of tubing by loosening.Stainless steel 316



Gasket

Tubing

Small tightening torque.Secure sealing.

Stainless Steel Miniature Fittings Series MS

Fitti

ngs

& T

ubin

g



Series MS

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread : M5


Applicable tubing diameter

Max. operating pressure (At 20˚C)

Connection size

Material

Hose Nipple

Barb Fittings

Can be used in corrosive applications.

Stainless steel material (SUS316).



Hose Nipple, Hose elbow.Hose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.

Nylon Soft nylon

M5(JIS B0209, Class 2: Metric coarse thread)

1.0MPa

SUS316SUS 304, Aluminium

Polyurethane

ø4/ø2.5ø6/ø4

ø3.18/ø2.18 ø4/ø2.5ø6/ø4

ø3.18/ø2ø4/ø2.5, ø6/ø4

1.5MPa 0.8MPa

Body

Gasket




TubingHose nipples and hose elbow accept nylon, soft nylon and polyurethane tubing.

Cap nutSecure holding is achieved by manual tightening.Easy disconnection of tubing by loosening.Stainless steel 316



Gasket

Tubing

Small tightening torque.Secure sealing.


Series M5ModelDescription



Application



MS-5AU-3

MS-5AU-4

MS-5AU-6

Universal tee for soft tubing

MS-5ATHU-3

MS-5ATHU-4

MS-5ATHU-6


Hose nipple

MS-5ALHU-3

MS-5ALHU-4

MS-5ALHU-6

To pipe nylon, soft nylon, polyurethane tubing.

MS-5H-4

MS-5H-6

Hose elbow

ModelDescription Application

• To pipe nylon, soft nylon, polyurethane tubing.• Body rotates 360˚ around the stud axis. Position can be fixed after alignment.

Remark(s)

ø3.18/2.18X M5

ø3.18/2 X M5

ø4/2.5 X M5

ø6/4 X M5

ø3.18/2.18 X M5

ø3.18/2 X M5

ø4/2.5 X M5

ø6/4 X M5

ø4/2.5 X M5

ø6/4 X M5

ø4/2.5 X M5

ø6/4 X M5

Material:PVC

MS-5HLH-4

GasketSealant (M5 thread portion)M-5G1

Gasket (H)

M-5GH

Universal nippleBody rotates 360˚ around the stud axis.

MS-5UN


MS-5N

Extension fittingFor 3D piping to prevent interference between fittings.

MS-5J

PlugTo plug unused M5 port.MS-5P

BushingConnection from R1/8 piping to M5 fittings.

MS-5B

Universal tee

MS-5UT

Universal elbow Body rotates 360˚ around the stud axis. Position can be fixed after alignment.


MS-5UL

MS-5HLH-6

ø3.18/2.18 X M5

ø3.18/2 X M5

ø4/2.5 X M5

ø6/4 X M5

Material:Nylon 66GF 30%

Only for MS-5ALHU-6, MS-5HLH-4, MS-5HLH-6 and MS-5ATHU-6.

Remark(s)

M5 male X M5 male

PAT

M5 male X M5 female

M5 male X M5 male

R1/8 X M5 female

M5 female X M5 female X M5 male

M5 female X M5 male









Series KA Antistatic One-Touch Fittings

Fittings & Tubing

1464

Antistatic One-Touch Fittings

Applicable Tubing

Series KA

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: M, Uni-thread

Air

1.0MPa

–100kPa

3.0MPa

0 to 40˚C

Unithread, screw

JIS B0209, Class 2 (Metric coarse thread)

Gasket

Brass parts are all electroless nickel plated.

104 to 107Ω

Tubing material

Tubing O.D.

Antistatic soft nylon, Antistatic polyurethane

ø3.2, ø4, ø6, ø8, ø10, ø12

Fluid



Proof pressure



Copper-free specifications

Surface resistance

One-touch collet mechanism.

Compatible with vacuum to 100 kPa of pressure.

Can be used for copper-free applications.

Flame resistant (Equivalent to UL-94 Standards V-0).

Conductive resin is used for the body sealant of fittings

Mounting thread

PackingCompatible with a wide range of pressure, from low vacuum to 1.0 MPa.The special shape ensures sealing and reduces resistance of tubing insertion.

ChuckLarge retaining force.Secure engagement with chuck and large retaining force with collet.

Effective for piping in confined space.The body and thread portion can be rotated. (For positioning)

Requires little force for removal.Releases the chuck collet to remove the tube as well as to prevent the chuck from biting too deeply into the tubing.

ColletGuide

Tubing

Release button (Black)

Body

O-ring

Stud

Gasket

Uni thread

Antistatic One-Touch Fittings Series KA

Fitti

ngs

& T

ubin

g



KAH Male Connector

3.2

4

6

8

10

12

M5 M6

M6 M5

M6 M5

KAH23-M5 -M6

-U01KAH04-M5

-M6 -U01 -U02

KAH06-M5 -M6

-U01 -U02 -U03KAH08-U01

-U02 -U03KAH10-U01

-U02 -U03 -U04KAH12-U02

-U03 -U04



mmConnecting

threadModel

3.2

4

6

8

10

12

M5 M6

M6 M5

M6 M5

KAL23-M5 -M6

-U01KAL04-M5

-M6 -U01 -U02

KAL06-M5 -M6

-U01 -U02 -U03KAL08-U01

-U02 -U03KAL10-U01

-U02 -U03 -U04KAL12-U02

-U03 -U04



mm


3.2

4

6

8

10

12

M5 M6

M6 M5

M6 M5

KAT23-M5 -M6

-U01KAT04-M5

-M6 -U01 -U02

KAT06-M5 -M6

-U01 -U02 -U03KAT08-U01

-U02 -U03KAT10-U01

-U02 -U03 -U04KAT12-U02

-U03 -U04



mm


3.2

4

6

8

10

12

M5 M6

M6 M5

M6 M5

KAY23-M5 -M6

-U01KAY04-M5

-M6 -U01 -U02

KAY06-M5 -M6

-U01 -U02 -U03KAY08-U01

-U02 -U03KAY10-U01

-U02 -U03 -U04KAY12-U02

-U03 -U04



mm

Connecting thread

Model

Uni 1/8

Uni 1/8Uni 1/4

Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2

Uni 1/8

Uni 1/8Uni 1/4


Uni 1/8

Uni 1/8Uni 1/4


Uni 1/8

Uni 1/8Uni 1/4

Uni 1/8Uni 1/4Uni 3/8 Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2

KAT Male Branch Tee

KAL Male Elbow KAY Male Run Tee

Series KA Antistatic One-Touch Fittings

Fittings & Tubing

1466


KAU Union “Y” KAT Branch Tee

3.2

4

6

8

10

12

M5 M6

M6 M5

M6 M5

KAU23-M5 -M6

-U01KAU04-M5

-M6 -U01 -U02

KAU06-M5 -M6

-U01 -U02 -U03KAU08-U01

-U02 -U03KAU10-U02

-U03 -U04KAU12-U02

-U03 -U04



mmConnecting

threadModel

3.24681012

KAH23-00KAH04-00KAH06-00KAH08-00KAH10-00KAH12-00



Model

3.24681012

KAL23-00KAL04-00KAL06-00KAL08-00KAL10-00KAL12-00



Model

3.24681012

KAT23-00KAT04-00KAT06-00KAT08-00KAT10-00KAT12-00

To branch a tubing into 2 directions each at 90˚ to the original one.


Model

3.2468

1012

KAU23-00KAU04-00KAU06-00KAU08-00KAU10-00KAU12-00



Model

KAH23-04KAH04-06KAH06-08KAH08-10KAH10-12



3.2468

10

b4681012

Uni 1/8

Uni 1/8Uni 1/4

Uni 1/8Uni 1/4Uni 3/8Uni 1/8Uni 1/4Uni 3/8Uni 1/4Uni 3/8Uni 1/2Uni 1/4Uni 3/8Uni 1/2

aa b

KAR23-04KAR04-06

-08 -10KAR06-08

-10 -12KAR08-10

-12KAR10-12



mm

Fitting size Model

3.2

4

6

8

10

4681081012101212

KAU Union “Y”

KAH Different Dia. Straight

KAR Plug-In Reducer

KAH Straight Union

KAL Union Elbow

Clean One-Touch Fittings Series KP

Fitti

ngs

& T

ubin

g


Clean One-Touch Fittings (For Air Blow Applications)

Recommended Applicable Tubing

Series KP

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: R

Particle generation grade

Fluid

Max. operating pressure (20˚C)


Proof pressure (20˚C)


Thread

Grade 1Air, Nitrogen gas, Water (Pure water)

1MPa–100kPa

3MPa–5 to 80˚C (With no condensation)JIS B0203 (Taper thread for piping)

Tubing material

Tubing O.D.

Polyolefin: Series TPHSoft polyolefine: Series TPS

ø4, ø6, ø8, ø10, ø12

Completely oil free.Tube sizes 4mm to 12mm avaiable.Liquid contact parts are non-metal.Components are washed, assembled and double packed in a clean room.Compatible with vacuum pressure (-100kPa).

Polyurethane tubing: Series TU, Nylon tubing: Series T, Soft nylon tubing: Series TS also can be used though with lower degree of cleanliness.

Note 1) Refer to the particle generation grade classifications.Note 2) Contact SMC for other types of fluids.Note 3) The max. operating pressure is one at 20˚C.Note 4) When water is used as the operating fluid, do not allow the surge pressure to exceed the max. operating pressure.

Series KP is designed for clean blow and use in washing lines. Consult SMC for use in other applications.

Sealant material: EPDM does not have sufficient resistance to mineral oil and is not suitable for piping of general pneumatic equipment.

Note 1)

Note 2)

Note3)

Particle GenerationGrade Classifications

0.1 0.2Particle Diameter m or less

Aver

age

parti

cle

conc

entra

tion

parti

cles

/ft3

0.3 0.5 1

10-1

100

101

102

103

104

Grade 4

Grade 3

Grade 2

Grade 1Caution

Polyolefin resin

SUS304 stainless steelThe chuck provides a secure bite, while holding force isincreased by the collet.

EPDMHolds the cushion and secures the seal.Suppresses sliding of the seal to prevent generation of particulates.

SUS304stainlesssteel

Polypropylene resin

EPDMSpecial configuration for reliable sealing and low resistance when inserting tube.

SUS304 stainless steelThe body can be rotated to position the piping entry (For positioning purpose).

Releases the chuck collet when tubing is removed. Also prevents the chuck from biting excessively into the tubing.

Release button

Stopper dust check

GuideCollet

Polypropylene resinBody

Polypropylene resinStud

Seal (Oil free)

EPDMO-ring (Oil free)

EPDMCushion (Oil free)

Drive bushing Chuck

Clean tubing

PolypropyleneLight force for removal

PAT.

Series KP Clean One-Touch Fittings

Fittings & Tubing

1468

KPH Male Connector

Clean One-Touch Fittings

KPY Male Run Tee

KPL Male Elbow KPU Union “Y”

KPT Male Branch Tee KPH Straight Union

4

6

8

10

12

KPH04-01 -02KPH06-01

-02KPH08-01

-02KPH10-02

-03KPH12-03

-04



mmConnecting

threadModel

4

6

8

10

12

KPL04-01 -02

KPL06-01 -02

KPL08-01 -02

KPL10-02 -03

KPL12-03 -04



mmConnecting

threadModel

4

6

8

10

12

KPT04-01 -02

KPT06-01 -02

KPT08-01 -02

KPT10-02 -03

KPT12-03 -04

To branch the line from the female thread at 90 in each direction.


mmConnecting

threadModel

4

6

8

10

12

KPY04-01 -02

KPY06-01 -02

KPY08-01 -02

KPY10-02 -03

KPY12-03 -04



mmConnecting

threadModel

4

6

8

10

12

KPU04-01 -02KPU06-01

-02KPU08-01

-02KPU10-02

-03KPU12-03

-04



mmConnecting

threadModel

4681012

KPH04-00KPH06-00KPH08-00KPH10-00KPH12-00



Model

R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

R1/8R1/4R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

Clean One-Touch Fittings Series KP

Fitti

ngs

& T

ubin

g


KPL Union Elbow


KPR Plug In Reducer

4

6

8

10

KPR04-06 -08

KPR06-08 -10

KPR08-10 -12

KPR10-12



mmModel

4681012

KPL04-00KPL06-00KPL08-00KPL10-00KPL12-00



Model

4681012

KPT04-00KPT06-00KPT08-00KPT10-00KPT12-00



Model

4681012

KPP-04KPP-06KPP-08KPP-10KPP-12


Fitting size Model

468

1012

KPU04-00KPU06-00KPU08-00KPU10-00KPU12-00



Model

Fitting size

688

10101212

KPT Union Tee KPP Plug

KPU Union “Y”

Series KPQ/KPG Clean One-Touch Fittings

Fittings & Tubing

1470

PAT.

MDriving air piping system

Drain pipingPiping for regulator breathing

Exhaust piping for solenoid valve

Relief port piping

Inside clean roomClean fittings KPQ/KPG

In case of half union

KPQ: Light greyKPG: Light blue

Release ButtonPolypropylene

StudKPQ: Brass (Electroless nickel plated)KPG: Stainless (SUS304)

BodyPolypropylene Body

KPQ: Brass (Electroless nickel plated)KPG: Stainless (SUS304)


Series KPQ/KPG

Specifications

Features

Applicable tubing O.D.: Metric Size Connecting thread: M, R

Particle generation grade

Fluid



Proof pressure (20˚C)


Thread

Grade 1Air

1MPa–100kPa

3MPa–5 to 60˚C (With no condensation)JIS B0203 (Taper thread for piping)

Wide range of port sizes of M5 to 1/2”

Use of Polypropylene for resin parts.

Tube size Ø 4mm - 12mm available.

Low particle generation suitable for clean room application.

Note 1) Refer to the particle generation grading chart. Internal parts are not included in the grading because of greasing on sealant.Note 2) The max. operating pressure is one at 20˚C.

Note 1)

Note 2)

Particle Generation Grading

0.1 0.2Particle Diameter µm or less

Aver

age

parti

cle

conc

entra

tion

parti

cles

/ft3

0.3 0.5 1

10-1

100

101

102

103

104

Grade 4

Grade 3

Grade 2

Grade 1

Recommended Applicable Tubing

Tubing material

Tubing O.D.

Polyurethane: Series 10-Nylon tubing: Series T, Soft nylon tubing: Series T and Series TS soft nylon tubing can also be used through with lower degree of cleanliness.

ø4, ø6, ø8, ø10, ø12

Series KPGStainless steel 304Release button: Light blue

Series KPQBrass (electroless nickel plated)Release button: Light gray

Polypropylene resin

Stainless steel 304

Polypropylene resinNBR

Brass (Electroless nickel plated)

Brass (Electroless nickel plated)

Stainless steel 304

Stainless steel 304

Series KPQ Series KPGModelBodyStudChuckGuide, StopperCollet, Release buttonSeal, O-ring, Bumper

Principal Parts Material

Clean One-Touch Fittings Series KPQ/KPG

Fitti

ngs

& T

ubin

g


KPQH/KPGH Male Connector


KPQT/KPGT Union Tee

KPQL/KPGL Male Elbow KPQY/KPGY Male Run Tee

4

6

8

10

12

KPQH04-M5KPQH04-01KPQH04-02KPQH06-M5KPQH06-01KPQH06-02KPQH08-01KPQH08-02KPQH10-02KPQH10-03KPQH12-03KPQH12-04

KPGH04-M5KPGH04-01KPGH04-02KPGH06-M5KPGH06-01KPGH06-02KPGH08-01KPGH08-02KPGH10-02KPGH10-03KPGH12-03KPGH12-04



mmConnecting

threadModel



KPQH KPGH

4

8

10

12

6

KPQL04-M5KPQL04-01KPQL04-02KPQL06-M5KPQL06-01KPQL06-02KPQL08-01KPQL08-02KPQL10-02KPQL10-03KPQL12-03KPQL12-04

KPGL04-M5KPGL04-01KPGL04-02KPGL06-M5KPGL06-01KPGL06-02KPGL08-01KPGL08-02KPGL10-02KPGL10-03KPGL12-03KPGL12-04


mmConnecting

threadModel

KPQL KPGL

4

8

10

12

6

KPQY04-M5KPQY04-01KPQY04-02KPQY06-M5KPQY06-01KPQY06-02KPQY08-01KPQY08-02KPQY10-02KPQY10-03KPQY12-03KPQY12-04

KPGY04-M5KPGY04-01KPGY04-02KPGY06-M5KPGY06-01KPGY06-02KPGY08-01KPGY08-02KPGY10-02KPGY10-03KPGY12-03KPGY12-04


mmConnecting

threadModel

KPQL KPGL


4

8

10

12

6

KPQT04-M5KPQT04-01KPQT04-02KPQT06-M5KPQT06-01KPQT06-02KPQT08-01KPQT08-02KPQT10-02KPQT10-03KPQT12-03KPQT12-04

KPGT04-M5KPGT04-01KPGT04-02KPGT06-M5KPGT06-01KPGT06-02KPGT08-01KPGT08-02KPGT10-02KPGT10-03KPGT12-03KPGT12-04


mmConnecting

threadModel

KPQT KPGT

<M5>

<R>

<M5>

<R>

<M5><M5>

<R><R>

M5

M5

R1/8R1/4

R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

M5

M5

R1/8R1/4

R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

M5

M5

R1/8R1/4

R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

M5

M5

R1/8R1/4

R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

Series KPQ/KPG Clean One-Touch Fittings

Fittings & Tubing

1472

KPQU/KPGU Union “Y” KPQT/KPGT Union Tee

KPQH/KPGH Straight Union

KPQU/KPGU Union “Y”

4681012

KPQH04-00KPQH06-00KPQH08-00KPQH10-00KPQH12-00

KPGH04-00KPGH06-00KPGH08-00KPGH10-00KPGH12-00



Model


4

8

10

12

6

KPQU04-M5KPQU04-01KPQU04-02KPQU06-M5KPQU06-01KPQU06-02KPQU08-01KPQU08-02KPQU10-02KPQU10-03KPQU12-03KPQU12-04

KPGU04-M5KPGU04-01KPGU04-02KPGU06-M5KPGU06-01KPGU06-02KPGU08-01KPGU08-02KPGU10-02KPGU10-03KPGU12-03KPGU12-04


mmConnecting

threadModel

KPQU KPGU

KPQH KPGH

4681012

KPQL04-00KPQL06-00KPQL08-00KPQL10-00KPQL12-00

KPGL04-00KPGL06-00KPGL08-00KPGL10-00KPGL12-00


Model

KPQL KPGL


468

1012

KPQT04-00KPQT06-00KPQT08-00KPQT10-00KPQT12-00

KPGT04-00KPGT06-00KPGT08-00KPGT10-00KPGT12-00


Model

KPQT KPGT


468

1012

KPQU04-00KPQU06-00KPQU08-00KPQU10-00KPQU12-00

KPGU04-00KPGU06-00KPGU08-00KPGU10-00KPGU12-00


Model

KPQU KPGU


4

6

8

10

68810101212

Model

KPQR KPGR



mm

Fitting size

KPQR04-06KPQR04-08KPQR06-08KPQR06-10KPQR08-10KPQR08-12KPQR10-12

KPGR04-06KPGR04-08KPGR06-08KPGR06-10KPGR08-10KPGR08-12KPGR10-12

4681012

KPP-04KPP-06KPP-08KPP-10KPP-12


Fitting size Model

<M5>

<R>

M5

M5

R1/8R1/4

R1/8R1/4R1/8R1/4R1/4R3/8R3/8R1/2

KPQL/KPGL Elbow

KPQR/KPGR Plug In Reducer

KPP Plug


Nylon Tubing Series T

Fitti

ngs

& T

ubin

g


Nylon Tubing

Series TFeatures

Suitable for piping in confined space.

20m and 100m coils

6 colour options.

T 04 25 B 20Length per roll

Symbol Length20100

20m roll100m roll (Black & White only)

Colour indicationSymbol Colour

BWR

BUYG

BlackWhiteRedBlue

YellowGreen

Tubing I.D.

Tubing O.D.

Model/Specifications

How to Order

Burst Pressure Characteristics and Operating Pressure Curve

Model

Air/Water

1.5 MPa

Refer to the burst pressure characteristics curve.

–20˚C to +60˚C (Water: 0 to 40˚C) (No freezing)

Nylon 12

Fluid

Max.operatingpressure(at 20˚C)

Burstpressure

Min.bendingradius (mm)

OperatingtemperatureMaterial

Metric size (Series T)Tubing size

T042542.5

T040343

T060464

T064564.5

T080686

T1075107.5

T1209129

T16131613

Tubing O.D. (mm)Tubing I.D. (mm)

White (W)

Red (R)

Blue (BU)

Yellow (Y)

Green (G)

Black (B)

75604836242513 100

5 32" 5 16"

Note) Imperial sizes also available on request.

Series TS Soft Nylon Tubing

Fittings & Tubing

1474

Soft Nylon Tubing

Series TSFeatures

Tubing Size: Metric Size

20m and 100m coils

6 colour options

Pliable for tighter bend radii

TS 06 04 W 100Length per roll

Symbol Length20100

20m roll100m roll (Black & White only)


BWR

BUYG

BlackWhiteRedBlue

YellowGreen

Tubing I.D.

Tubing O.D.


How to Order


Model

Air

1.0 MPa


–20˚C to +60˚C (No freezing)

Nylon 11, Nylon 12

Metric size (Series TS)Tubing size

TS04254 2.5

TS060464

TS080686

TS107510 7.5

TS120912

9

TS16121612


White (W)

Red (R)

Blue (BU)

Yellow (Y)

Green (G)

Black (B)

12 15 23 27 31 60

5 32" 5 16"

— 20 m roll — 100 m roll (TS1612 is reel.)

Fluid

Max. operatingpressure (at 20˚C)

Burst pressure

Min. bending radius (mm)

Operating temperatureMaterial

Note) Imperial sizes also available on request.

Polyurethane Tubing Series TU

Fitti

ngs

& T

ubin

g


Polyurethane Tubing

Series TU


Features


Flexible Tubing sizes 2mm to 16mm OD

For general industrial air and water applications.

20m and 100m coils.

29 colour options.

Available in metric size (TU).

Imperial sizes available on request.

TU 04 25 BU 20Length per roll

Symbol Length20

10020m roll

100m rollColour indicationSymbol Colour

BWR

BUYGCYR

BlackWhiteRedBlue

YellowGreen

TransparentOrange

Tubing I.D.Tubing O.D.

How to Order

Model

Fluid Air/Water

0.8 MPa


–20 to +60˚C (Water: 0 to 40˚C) (No freezing)

Polyurethane

Max. operating pressure at 20˚CBurst pressureMin. bending radius (mm)


Metric size (Series TU)Tubing size

TU04254 2.5

TU060464

TU080585

TU106510 6.5

TU120812 8

TU16101610


Black (B)

White (W)

Red (R)

Blue (BU)

Yellow (Y)

Green (G)

Clear (C)

Orange (YR)

10 15 20 27 35 45

5 32" 5 16"

— 20 m roll — 100 m roll (TU1610 is reel.)


4

TU02122 1.2

ø2 Polyurethane TubingSeries TU

Extra colours

Black (B)

Yellow (Y)

Green (G)

Clear (C)

Orange (YR)

Solid blue (BU1)

Clear blue (BU2)

Medium blue (BU3)

Brown (BR1)

Solid green (G1)

Clear green (G2)

Red (R)

White (W)

Blue (BU)

Neon green (G3)

Neon yellow (Y3)

Solid purple (PU1)

Clear purple (PU2)

Solid yellow (Y1)

Clear yellow (Y2)

Solid red (R1)

Clear red (R2)

Clear orange (YR1)

Neon or ange (YR2)

Silver (S1)

Gray (GR1)

Dark green (G4)

Light gray (GR2)

Neon pink (P1)

Series TUS Soft Polyurethane Tubing

Fittings & Tubing

1476

Soft Polyurethane Tubing

Series TUS

Series

Features


Suitable for piping in confined space.

20m and 100m coils

8 colour options.

TUS 10 65 B 100Length per roll

Symbol Length20

10020m roll

100m roll (Black & blue only)


BWR

BUYGNYB

BlackWhiteRedBlue

YellowGreen

TranslucentYellow brown

Tubing I.D.

Tubing O.D.

Specifications

How to Order


ModelO.D. mmI.D. mm

FluidMax. operating pressure (20˚C)Burst pressureApplicable fittingMin. bending radius mmOperating temperatureMaterial

Metric sizeTubing

TUS04254

2.5

TUS060464

TUS080585

TUS1065106.5

TUS1208128

Black (B)

White (W)

Red (R)

Blue (BU)

Yellow (Y)

Green (G)

Translucent (N)

Yellow brown (YB)

–20m roll –100m reel

Inner SleeveSeries TJReinforces soft polyurethane tubing connected to one-touch fitting.Insert an inner sleeve into soft polyurethane tubing.

Model Length1819

20.52324

TJ-0425TJ-0604TJ-0805TJ-1065TJ-1208

Applicabletubing model

TUS0425TUS0604TUS0805TUS1065TUS1208Tubing drawing

strength N(with one-touch fitting)

Without inner sleeve

With inner sleeve

Air0.6MPa

Refer to burst pressure characteristics curve.One-touch fitting, insert fittings, hose nipple

–20 to 60˚C (With no freezing)Polyurethane

8 15 15 22 29

15 60 60 85 110

80 230 250 300 480

Note 1) Not transparent but translucent owing to the material.

Note 1)

Model

TUS Related Accessories

Soft Polyurethane Tubing Series TUS

Fitti

ngs

& T

ubin

g

1477


Wear Resistant Tubing

Series TUZFeatures

Made of special polyurethane.

Sliding motion abration reduction to aprox. 1/3of the TU Series.

Flexible tubing sizes 4mm to 12mm OD.

6 Colour variations

How to Order

TUZ0425 BU 20Tubing model

ModelTUZ0425TUZ0604TUZ0805TUZ1065TUZ1208

O.D. x I.D. (mm) 4 x 2.5 6 x 4 8 x 510 x 6.512 x 8

ColourSymbol

BWR

BUYG

ColourBlackWhiteRedBlue

YellowGreen

Length per rollSymbol20

100

Length20 m roll

100 m roll

Burst Pressure Characteristics Curve and Operating Pressure

Temperature (C)

0–20

4.0

3.0

2.0

1.0

0

Pres

sure

(MPa

)

20 40 60

Burst pressure

Maximum operating pressure

Note 1) The minimum bending radius means the value measured by the method shown in the figure at the right at the temperature of 20C when the tube is bent. The minimum bending radius assumes static piping. If the tube is used in a moving part, provide extra length to the tube. Check the bending radius recommended by the flexible protection tube manufacturer to assure that the tube is used in the flexible protection tube.

Note 2) Not clear, but opaque due to material.

TUZ1208 — 20 m roll — 100 m roll

Model128

TUZ1065106.5

TUZ080585

TUZ060464

TUZ04254

2.5Tubing O.D. (mm)Tubing I.D. (mm)

Black (B)

White (W)

Red (R)

Blue (BU)

Yellow (Y)

Green (G)

Fluid

Burst pressureMin. bending radius (mm)Operating temperatureMaterial

Applicable fittings


20C60C

Air

0.8 MPa0.4 MPa


–20 to +60CSpecial polyurethane

10 15 20 27 35

One-touch fittings KQ/KJ series,Insert fittings KF series, Stainless steel 316 insert fittings KFG series,Miniature fittings M/MS series (hose nipple type)

Specifications

Model

Series TUH Hard Polyurethane Tubing

Fittings & Tubing

1478

Hard Polyurethane Tubing

Series TUH

Series

Features


2 variants, high pressure and standard.

4 colour choices.

Smaller bending radii than nylon tubing.

Improved maximum operating pressures above 0°C compared to standard polyurethane.

TUH 06 04 B 20Length per roll

Symbol Length20100

20m roll100m roll


BWBUN

BlackWhiteBlue

Translucent

Tubing I.D.

Tubing O.D.

Specifications

How to Order

Note 1) Consult SMC regarding other fluids. Water cannot be used because of occurrence of hydrolysis.Note 2) The maximum operating pressure is the value at 20˚C. Refer to the burst pressure characteristics and

operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst.

Note 3) The minimum bending radius is measured at 20˚C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius.

Model O.D. mmI.D. mmModel

O.D. mmI.D. mm

Standard

High pressure

Fluid

Burst pressureOperating temperatureMaterial

Metric sizeTubing

TUH04284

2.8TUH0425

42.5

TUH060464

TUH080585

TUH1065106.5

TUH1208128

TUH06446

4.4

TUH08588

5.8

TUH1073107.3

TUH1288128.8

Black (B)Opal (W)Blue (BU)Translucent (N)

–20m roll –100m

Air Note 1)

0.8MPa Note 2)

1.0MPa Note 2)

Refer to burst pressure characteristics curve.–20 to 60˚CPolyurethane

10 18 24 30 3610 15 20 27 35


Min. bending radius mm

Standard typeHigh pressure typeStandard typeHigh pressure type

Standard type

High pressure type


5

4

3

2

1

0-20 0 20

Operating temperature ˚C

Burs

t pre

ssur

e M

Pa

40 60


5

6

7

4

3

2

1

0-20 0 20


Burs

t pre

ssur

e M

Pa

40 60


Standard type

High pressure type

Polyurethane Coil Tubing Series TCU

Fitti

ngs

& T

ubin

g


Polyurethane Coil Tubing

Series TCU

Coil Tubing

Features

Tubing Size: Metric SizeSpecifications

Model

O.D.

4

6

8

I.D.

1231231

1.5

12

1.512

Max. operating length mNumber of rolls Model

2.5

4

5

colour

Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)

TCU0425B-1

1

TCU0425B-2

24

2.5

TCU0425B-3

3

TCU0604B-1

1

Air Note 1)

0.8MPaRefer to burst pressure characteristics curve.

–20 to 60˚CPolyurethane

Black

TCU0604B-2

264

TCU0604B-3

3

TCU0805B-1

185

Note 1) Consult SMC regarding other fluids.Note 2) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid

abnormal temperature rises due to adiabatic compression.

Number of coresTubing O.D. mmTubing I.D. mmFluidMax. operating pressure (20˚C)Burst pressureOperating temperatureMaterialcolour

TCU0425B-1TCU0425B-2TCU0425B-3TCU0604B-1TCU0604B-2TCU0604B-3TCU0805B-1


Note 2)

Single or multi-core option.

For flexible piping applications.

For compact piping.

Series TFU Polyurethane Flat Tubing

Fittings & Tubing

1480

Polyurethane Flat Tubing

Series TFU

10m Roll

Features

Tubing Size: Metric SizeSpecifications

2 or 3 core flat tubing for neat presentation.

For flexible piping applications.

For compact piping.

TFU 04 25 B 2Number of cores

Symbol Number of cores23

23


B BlackTubing I.D.

Tubing O.D.

Model

2 3 2 3 2

TFU0425B-2

TFU0425B-3

TFU0604B-2

TFU0604B-3

TFU0805B-2

TFU0805B-3

34

2.5

10

64

Air Note 1)

0.8 MPaRefer to burst pressure characteristics curve.

–20 to 60˚C (With no condensation)Polyurethane

Black1510

85

20

Number of coresTubing O.D. mmTubing I.D. mmFluidMax. operating pressure (20˚C)Burst pressureOperating temperatureMaterialColourMin. bending radius mmTubing length per roll (m)

Note 1) Consult SMC regarding other fluids. Avoid abnormal temperature rises due to adiabatic compression.

TFU0425B-2TFU0425B-3TFU0604B-2TFU0604B-3TFU0805B-2TFU0805B-3

O.D. I.D. Number of rollsColour (Colour symbol) ModelBlack (B)Black (B)Black (B)Black (B)Black (B)Black (B)

4

6

8

2.5

4

5

232323

How to Order

FR Soft Nylon Coil Tubing Series TRS

Fitti

ngs

& T

ubin

g

1481


Flame Resistant Soft Nylon TubingSeries TRS

Series

Features


Specifications


How to Order TRS 10 65 B 100Length per roll

Symbol Length20

10020m roll

100m on reel

Colour indication

Tubing I.D.

Tubing O.D.Symbol Colour

BWR

BUG

BlackWhiteRedBlue

Green

ModelO.D. mmI.D. mm

FluidMax. operating pressure (20˚C)Burst pressureMin. bending radius mmOperating temperatureMaterial

Metric sizeTubing

TRS060363

TRS080585

TRS1065106.5

TRS1208128

Black (B)White (W)Red (R)Blue (BU)Green (G)

Air, Water1.2MPa

Refer to burst pressure characteristics curve.

–20 to 60˚C, Water: 0 to 60˚C (With no condensation)Flame resistant nylon (Equivalent to UL-94 Standards V-0)

17 19 27 32

Flame resistant tubing(equivalent to UL-94 Standards V-0).

Applicable to general pneumatic and water piping in a spark atmosphere such as in spot welding.

–20m roll –100m on reel

Series TRB FR Double Layer Tubing

Fittings & Tubing

1482

Flame Resistant Double Layer Tubing

Series TRB

Series

Features


Specifications


How to Order

TRB 10 75 B 100Length per roll

Symbol Length20100

20m roll100m on reel

Colour indication

Tubing I.D.


BWR

BUYG

BlackWhiteRedBlue

YellowGreen

Flame resistant (equivalent to UL-94 Standards V-0)


Double layer design using flame resistant resin (equivalent to UL-94 Standard V-0) for outer layer.

FluidMax. operating pressure (20˚C)Burst pressure

Air, Water Note 2)


Nylon 11PVC (Equivalent to V-0 in UL-94 Standards)

–20 to 60˚C, Water: 0 to 60˚C (With no condensation)

Inner tubing O.D. mmInner tubing I.D. mmOuter layer thickness mm


Metric sizeTubing

TRB0604641

15 28 35 45

TRB0806861

TRB1075107.51

TRB12091291

Black (B)White (W)Red (R)Blue (BU)Yellow (Y)Green (G)


Note 1)

Operating temperatureInner tubingOuter layer

Note 1) The inner tubing are all black.Note 2) Applicable to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature.Note 3) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression.

Material

Tool to peel off outer layer tubing.

Inner tubingSoft Nylon

Outer layer

FR double layer tubing (Sectional view)

Out

er la

yer c

olou

r

Model

Note 3)

Related Accessories

Tubing Cutter Series TKS

FR Double Layer Polyurethane Tubing Series TRBU

Fitti

ngs

& T

ubin

g


Flame Resistant Double Layer Polyurethane Tubing

Series TRBU

Series

Features


Specifications


How to Order

TRBU 10 65 B 100Length per roll

Symbol Length20100


Colour indication

Tubing I.D.


BWR

BUYG

BlackWhiteRedBlue

YellowGreen

Flame resistant (equivalent to UL-94 Standards V-0)


Double layer design using flame resistant resin (equivalent to UL-94 Standard V-0) for outer layer.

Inner tubing material: Polyurethane

FluidMax. operating pressure (20˚C)Burst pressure

Air, Water Note 2)


PolyurethanePolyolefin resin (Equivalent to V-0 in UL-94 Standards)

–20 to 60˚C, Water: 0 to 40˚C (With no condensation)

Inner tubing O.D. mmInner tubing I.D. mmOuter layer thickness mm


Metric sizeTubing

TRBU0604641

15 20 27 35

TRBU0805851

TRBU1065106.51

TRBU12081281

Black (B)White (W)Red (R)Blue (BU)Yellow (Y)Green (G)


Note 1)

Operating temperatureInner tubingOuter layer

Note 1) The inner tubing are all black.Note 2) Applicable to general industrial water. Consult SMC for use of other types of fluids. Keep the surge pressure below the maximum operating temperature.Note 3) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression.Note 4) The value at a temperature of 20˚C.

Material

Tool to peel off outer layer tubing.

Inner tubingPolyurethane

Outer layer

FR double layer polyurethane tubing (Sectional view)

5.0

4.0

3.0

2.0

1.0

0-20 0 20


Burs

t pre

ssur

e M

Pa

40 60

Burst pressure


Out

er la

yer c

olou

r

Model

Note 3)

Note 4)

Related Accessories

Tubing Cutter Series TKS

Series TAU Antistatic Polyurethane Coil Tubing

Fittings & Tubing

1484

Antistatic Polyurethane Tubing

Series TAU

Series

Features


Specifications

Burst Pressure Characteristics andOperating Pressure Curve

TAU 10 65 B 100

ModelO.D. mm I.D. mm

Burst pressure Min. bending radius mm Operating temperature MaterialSurface resistance

Metric size Tubing

TAU3220 3.22

TAU0425 4

2.5

TAU0604 64

TAU0805 85

TAU1065 106.5

TAU1208 128

Black (B)


Length per roll Symbol Length20100

20m roll 100m on reel

Colour indication Symbol Colour

B Black

Tubing I.D.

Tubing O.D.


0 to 40˚C Conductive polyurethane

104 to 107

10 10 15 20 27 35

For pneumatic piping system requiring anti static measures.

Flexible tubing

Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression. Note 2) The value at a temperature of 20˚C.

Note 1)

Note 2)

0.9MPaMax. operatingpressure (20˚C)

How to Order

Antistatic Soft Polyurethane Coil Tubing Series TAS

Fitti

ngs

& T

ubin

g

1485


Antistatic Soft Polyurethane Tubing

Series TAS

Series

Features

Specifications


TAS 10 65 B 100

ModelO.D. mmI.D. mm

Burst pressureMin. bending radius mmOperating temperatureMaterialSurface resistance

Metric sizeTubing

TAS32223.22.2

TAS04254

2.5

TAS060464

TAS080585

TAS1065106.5

TAS1208128

Black (B)


Length per rollSymbol Length20100



B Black

Tubing I.D.

Tubing O.D.


0 to 40˚CConductive polyurethane + flame resistant nylon (equivalent to UL-94 standards V-0)

104 to 107

12 12 15 19 27 32

Note 1) Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Avoid abnormal temperature rises due to adiabatic compression.Note 2) The value at a temperature of 20˚C, with a 10% or less O.D. variable rate.

Note 1)

Note 2)

1.2MPaMax. operating pressure (20˚C)

How to Order

20m Roll 100m on Reel

For pneumatic piping system requiring anti static measures.

Flame resistant tubing(Equivalent to UL-94 Standards V-0)

TAS3222B-20TAS0425B-20TAS0604B-20TAS0805B-20TAS1065B-20TAS1208B-20

Colour (Colour symbol) Model

Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)

3.2468

1012

2.22.545

6.58

TAS3222B-100TAS0425B-100TAS0604B-100TAS0805B-100TAS1065B-100TAS1208B-100

O.D. I.D. Colour (Colour symbol) Model

Black (B)Black (B)Black (B)Black (B)Black (B)Black (B)

3.24681012

2.22.545

6.58

O.D. I.D.

Series TH FEP Tubing (Fluoropolymer)

Fittings & Tubing

1486

FEP (Fluoropolymer) Tubing

Series TH

Series

Features


How to Order

Heat resistance: 200˚C

4 Colour variations

General pneumatic piping applications (Food, Semiconductor, Medical care and Automotive)

Model

Tubing O.D. (mm)

Tubing I.D. (mm)

Metric size

Translucent

Red (Translucent)

Blue (Translucent)

Black (Opaque)

NR

BUB

Color Symbol

TH0402

4

2

-20m roll -100m roll

TH0425

4

2.5

TH0604

6

4

TH0806

8

6

TH1075

10

7.5

TH1008

10

8

TH1209

12

9

TH1210

12

10

5/32"

Inch nominal size

5/16"

Inch nominal size

TH0604 N 20

ColourSymbolNR

BUB

Colour indication

Indication of tubing model

Metric size

Roll size20m roll100m roll

Symbol20100

Length per roll

TranslucentRed (Translucent)Blue (Translucent)Black (Opaque)

dne dexiF

2R

At a temperature of 20°C, bend the tubing into a U shape. Fix one end and gradually move the other end closer. Measure 2R at the point where the outside diameter's rate of change is 5%.

How to measure the minimum bending radius.

aPM erusserP gnitar ep

O .xaM

Operating Temperature °C

1

0.5

0-20 0 20 40 60 80 100120140160180200

2

3

TH0402

TH0604

TH0425

TH1008/TH1210

TH0806/TH1075/TH1209

Note) The maximum operating pressure varies dependant on the I.D. bore size even if the O.D. is the same.

Fluid

Applicablefittings



One-touch fittings: Series KQ, KJ Insert fittings: Series KFFluoropolymer fittings: Series LQMiniature fittings: Series M, MS (Hose nipple type)

Refer to below “Max. Operating Pressure.”Min. bending radius (mm) 15

Air, Inert gas: -20 to 200° °C (No freezing)

FEP (Fluorinated Ethylene Propylene Resin)

Air, Water Note 1), Inert gasNote 4)

Note 2)

Note 3)

Note 4)

20 35 60 95 100 130

Note 1) When using a fluid in liquid form, the surge pressure must not exceed the maximum operating pressure. A surge pressure higher than the maximum operating pressure can cause breakage of the fittings, or rupture of the tubing.Furthermore, an abnormal temperature increase due to adiabatic compression can also result in ruptured tubing.

Note 2) Do not use in locations where the FEP tubing will move.Be sure to operate under the maximum operating pressure conditions using the lower maximum operating specification of either the tubing or fittings.After long term use or under high temperatures, some fittings leakage may occur due to material deterioration with age. Perform periodic inspections, and if any leakage is detected, replace with a new product immediately.For High Purity Fluoropolymer, refer to the precautions of CAT.ES70-17, "High Purity Fluoropolymer Fittings & Tubing."

Note 3) Minimum bending radius is measured as shown left as representative values.Allow extra length when piping since the tubing may crush if bent more than the min. bending radius.

Note 4) Consult SMC if using any other fluids.

Max. Operating PressureSpecifications

Soft Fluoropolymer Tubing Series TD

Fitti

ngs

& T

ubin

g

1487


Soft Fluoropolymer Tubing

Series TDFeatures


Conforms to Food Sanitation Law.

Material: Denatured PTFEOperating temperature max. 260°C.

Flexibility: Approx. 20% improved.

How to Order

Maximum Operating Pressure

Note 1) When using a liquid fluid, the surge pressure must be under the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes. Furthermore, abnormal temperature rise caused by adiabatic compression may result in the tube bursting.

Note 2) Do not use this product in a manner in which the tube is not fixed.Observe the lesser value of the maximum operating pressure between the tube and fitting.A material change over a long duration or due to high-temperature may cause leakage. Perform periodic

maintenance and replace with a new product immediately when abnormalities are detected.Refer to the “Maintenance” precautions in the TD/TID tubing.For other precautions, see the “Fittings & Tubing” precautions in the “Best Pneumatics catalogue". When using the fluoropolymer fittings, please refer to the precautions in the relevant catalogue CAT. ES70-17.Note 3) The minimum bending radius is the representative value measured as shown below.

• Use a tube above the recommended minimum bending radius.• The tube may be bent if used under the recommended minimum bending radius. Therefore, refer to the refraction value and make sure that the tube is not bent or flattened.

• Please note that the refraction value is not warranted because of the value when 2R is measured by the method shown above on the left if the tube is bent or flattened, etc.


Metric size

Insert fitting KF seriesStainless steel 316 insert fitting KFG series

Miniature fittings M, MS series (Hose nipple type)Fluoropolymer fitting LQ2 series

ModelSize

TD0425Tubing O.D. (mm)Tubing I.D. (mm)

Roll

ColorFluid Note 1)

Max. operating temperature (fixed usage)Material

Max. operating pressure (MPa)

Min. bending radius (mm) Note 3)

Applicable fittings Note 2)

10 m20 m

20°C100°C200°C260°C

Recommended radiusRefraction value

42.5

1.6 0.9 0.450.2315 8

1.4 0.7 0.350.2 2516

0.9 0.5 0.250.154531

0.9 0.5 0.250.155535

0.9 0.5 0.250.157541

TD060464

TD080686

Translucent (material colour)Air, Water, Inert gas

260°CDenatured PTFE (Polytetrafluoroethylene resin)

TD1075107.5

TD1209129

TD0425

Tubing model

10Length per roll

Symbol1020

Length10 m roll20 m roll

Metric size

Bend the tube into the U-form at a temperature of 20°C. Fix one end and close loop gradually. Measure 2R when the deformed ratio of the tube diameter at bending reaches 5%.

How to measure theminimum bending radius

Fixe

d en

d

2R

–20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.0

Operating temperature (°C)

Max

. ope

ratin

g pr

essu

re (M

Pa)

TD0425

TD0604

TD0806/TD1075/TD1209

Series TL High Purity Fluoropolymer Tubing

Fittings & Tubing

1488

High Purity Fluoropolymer Tubing

Series TL

Series/Specifications

Features

How to Order

Outstanding corrosion resistance.

Compatable with max fluid temperature up to 200˚C.

High purity and low particulate generation.

+0.2–0.1

10.1

0.1

Metric sizes (Series TL)

20 40

Tubing modelNominal diameter

Tubing size

O.D.(mm)

Thickness(mm)

Bundle

Straight pipe

ColourApplicable fluidMax. operating pressure (at 20˚C)Burst pressure(at 20˚C) Min. bending radius (mm)Max. operating temperature (Fixed use)

Material

Basicdiameter

Basicdiameter

Tolerance

10 m20 m50 m100 m50 Ft. (16 m)100 Ft. (33 m)2 m

Tolerance

TL0403–

ø4 x ø3

4

0.50.05–––

4.9 MPa

TL0604–

ø6 x ø4

6

–––

6.9 MPa

TL0806–

ø8 x ø6

8

–––

4.7 MPa

65

TL1008–

ø10 x ø8

10

––

3.6MPa

110

TL1210–

ø12 x ø10

12

––

2.9 MPa

1 MPa 0.9MPa 0.7 MPa

160

TL1916–

ø19 x ø16

19

1.50.15––

2.6 MPa

0.6 MPa

Translucent (colour of material)Please refer to the applicable fluid chart.

260˚C

Super PFA

Tubing Model

Eluting fluorine ion amount (ng/g)

Type

Eluting amount

Fluorine ion

0.1 or less

Eluting metal ion amount (ng/cm2)

Type

Eluting amount

Al

4.5

Fe

0.3

Ni

0.2

Na

7.1

Ca

1.3

Length

Symbol102050100

Type

Roll

Length10 m20 m50 m

100 m

Applicable to both metric and inch size

Straight 2 m2S

20TL0604Metric sizes

2R

Note 4) Note 4)

Note 1)

Note 2)

Note 1) • The maximum operating pressure is the value at 20˚C. For other temperatures, calculate from the burst pressure drop coefficient.

Furthermore, an abnormal temperature increase due to adiabatic compression can cause tubing to burst.To operate at a temperature other than 20˚C, the operating pressure must be no more than the value calculated using the equation below: When the value (calculated using the formula below) exceeds 1 MPa, the Max. operating pressure is 1 MPa.(Max. operating pressure) = 1/4 x (burst pressure drop coefficient) x (burst pressure at 20˚C)

• When using a fluid in liquid form, the surge pressure must be no more than the maximum operating pressure.

A surge pressure higher than the maximum operating pressure can cause breakage of the fitting or bursting of the tubing.

Note 2) The minimum bending radius is measured using the method shown in the figure at the right.Note 3) It is connectable with LQ Series (3/4"size). As for other commercial items, there are some cases it is not able to connect due to tolerance of dimensions.

Fixe

d sid

e

At a temperature of 20˚C bend the tubing into a U shape. Then with one side fixed, gradually close the other side and measure 2R at the point where the tubing folds or flattens, etc.

A 15 g piece of fluororesin tubing is cut off, washed in deionized water and immersed in 15 ml of 25% methyl alcohol extract at room temperature for 24 hours. Then the extract is diluted with deionized water to be subjected to a quantitative analysis of fluorine ions.

The interior of the fluororesin tubing is washed with super deionized water. Approximately 20g of super high purity hydrofluoric acid (48%) is measured and injected into the tubing. The interior wall of the tubing is immersed at normal temperature for one week with both ends of the tubing plugged. Then the extract was diluted with super deionized water to be subjected to a quantitative analysis on Al, Fe, Ni, Na and Ca by the stripping method.

+- +- +-

High Purity Fluoropolymer Tubing Series TL

Fitti

ngs

& T

ubin

g


The material and fluid compatibility check list provides reference values as a guide only.Note 1) Since static electricity may be generated, implement suitable countermeasures.

• Compatibility is indicated for fluid temperatures of 200˚C or less.• The material and fluid compatibility check list provides reference values as a guide only, therefore we do not guarantee the application to our product.• The data above is based on the information presented by the material manufacturers.• SMC is not responsible for its accuracy and any damage happened because of this data.

Table symbol can be used.

Acetic acid

Acetone

Ammonium fluoride

Ammonium hydroxide

Butyl acetate

Methylne chloride

Hydrochloric acid

Hydrofluoric acid

Hydrogen peroxide

Methanol

Methyl ethyl Ketone

Nitric acid

Phosphoric acid

Caustic potash

Sulfuric acid

Toluene

Xylene

Sodium hydroxide

1.1.1-Trichloroethane

Rhosphorus pentachloride

Isobutyl alcohol

Isopropyl alcohol

Ozone

Ethyl acetate

Deionized water

Nitrogen

Ultrapure water

Tmah

100%

100%

40%

30%

100%

100%

38%

50%

60%

100%

—

70%

86%

85%

100%

—

—

100%

100%

—

—

—

—

—

—

—

—

—

Chemical Compatibility

Note 1)

Note 1)

Note 1)

Note 1)

Note 1)

Material and fluid compatibility check list for high purity fluoropolymer fittings

Burst pressure drop curve1.0

0.8

0.6

0.4

0.2

020 40 60 80 100 120 140 160 180 200 220 240 260

Temperature ˚C

Burs

t pre

ssur

e dr

op c

oeffi

cien

t

Series TPH Clean Tubing: Polyolefin Tubing

Fittings & Tubing

1490

Clean Tubing: Polyolefin Tubing

Series TPH

Series

Features


Suitable for clean room blowing systems.

6 colour options.

Clean tubing.

TPH 06 04 B 20Length per roll

Symbol Length20

10020m roll100m roll


BWR

BUYG

BlackWhiteRedBlue

YellowGreen

Tubing I.D.

Tubing O.D.

How to Order


SpecificationsFluidMax. operating pressure (20˚C)Min. bending radius mmBurst pressureOperating temperatureMaterial

Air, Nitrogen gas, Water (Pure water) Note 1)

35Refer to burst pressure characteristics curve.

–20 to 80˚C, Water: 5 to 80˚CPolyolefine resin

ModelO.D. mmI.D. mm

Metric sizeTubing

TPH04254

2.5

TPH060464

TPH080686

TPH1075107.5

TPH1209129

White (W)Black (B)Red (R)Blue (BU)Yellow (Y)Green (G)

–20m roll –100m roll

15 25 45 551.0MPa 0.7MPa

Note 1) Contact SMC regarding other fluids.Note 2) The maximum operating pressure is the value at 20˚C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst.Note 3) The minimum bending radius is measured at 20˚C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius.

Note 2)


Max. operating pressure (TPH0425,TPH0604)

TPH0806,TPH1075,TPH1209

Burst pressure

TPH0425,TPH0604

Burst pressure

Max. operating pressure(TPH0806,TPH1075,TPH1209)

Burs

t pre

ssur

e M

Pa

–20 00

1

2

3

4

5

20 40 60 80

Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease.

Caution

Clean Tubing: Soft Polyolefin Tubing Series TPS

Fitti

ngs

& T

ubin

g


Clean Tubing: Soft Polyolefin Tubing

Series TPS

Series

Features


Suitable for clean room blowing systems.

6 colour options.

Clean tubing.

Pliable for tight bend radii

TPS 06 04 B 20Length per roll

Symbol Length20100

20m roll100m roll


BWR

BUYG

BlackWhiteRedBlue

YellowGreen

Tubing I.D.

Tubing O.D.

How to Order


SpecificationsFluidMax. operating pressure (20˚C)Min. bending radius mmBurst pressureOperating temperatureMaterial

Air, Nitrogen gas, Water (Pure water) Note 1)

25Refer to burst pressure characteristics curve.

–20 to 80˚C, Water: 5 to 80˚CPolyolefine resin

ModelO.D. mmI.D. mm

Metric sizeTubing

TPS04254

2.5

TPS060464

TPS080585

TPS1065106.5

TPS1208128

White (W)Black (B)Red (R)Blue (BU)Yellow (Y)Green (G)

–20m roll –100m roll

10 20 30 400.7MPa

Note 1) Contact SMC regarding other fluids.Note 2) The maximum operating pressure is the value at 20˚C. Refer to the burst pressure characteristics and operating pressure curve for other temperatures. Abnormal temperature rises due to adiabatic compression can cause tubing to burst.Note 3) The minimum bending radius is measured at 20˚C based on the method shown in the figure at the left. At higher temperatures, breakage or flattening may occur even with a value larger than the minimum bending radius.

Note 2)

Series TP has less resistance to lithium grease and is not suitable for piping of pneumatic equipment using lithium grease.

Caution


Max. operating pressureBurs

t pre

ssur

e M

Pa

–20 00

1

2

3

4

5

20 40 60 80

Burst pressure

Series TB/TBR/TK Tubing Related Equipment

Fittings & Tubing

1492

Tubing Stand & Reels

Series TB/TBRFeatures

Compact size with a small footprint.

Installation can be easily completed by putting the tubing reels on the stand.

Easy replacement of tubing

One-touch snap fit operation

Locked Unlock condition

Tubing Cutter

Tubing Reels Tubing Stand: TB-2

TK-1 TK-2

Applicable tubing size mm Model

TBR-1TBR-2TBR-3TBR-4

4, 68

1012

Note) Do not use the cutter to cut metal such as wires.

Applicable tubing O.D.: 13mm or less

Applicable tubing O.D.: 18mm or less

TK-3 (Simple type)Applicable tubing O.D.: 12mm or less

Tubing reel

Tubing stand

40060

0750

Movement is easy with attached casters. A reel support is

provided, which can be moved according to the number of reels.

Series TK

Tubing Related Equipment Series TM/TG/TKS

Fitti

ngs

& T

ubin

g


Multiple Tubing Holder

Series TMFeatures

Double Layer Tubing Stripper

The outer layer of double layer tubing is peeled off easily.

ModelApplicable tubing sizeApplicable tubing materialHandle colourWeight

TG-1ø4, ø6

Nylon, Soft nylon, PolyurethaneBlue33g

ModelTKS-06TKS-08TKS-10TKS-12

Tip colourOrangeYellowBlue

Green

Applicable tubing*

TRB0604, TRBU0604TRB0806, TRBU0805TRB1075, TRBU1065TRB1209, TRBU1208

Can be separated at any position depending on the number of tubing. Adopts flame resistant resin (Equivalent to UL-94 Standards V-0).

To remove tubing in a confined space or from manifolded one-touch fittings.

* Inner tubing material/TRB: soft nylon, TRBU: polyurethane

TM-04TM-06TM-08TM-10TM-12

468

1012

Model6

12

8

Number of tubing (MAX.) Accessory: Phillips countersunk tapping screwSize: nominal size X length Number of pieces

4

2 X 6

2.6 X 8

3 X 8


Align the cutter with the cutting groove and cut the holder.

Cautionq The multiple tubing holder can be cut apart according to

the number of tubing to be connected.

<Cutting method>

w Cut the multiple tubing holder at a desired position and mount it on the equipment with the attached phillips countersunk tapping screws.

e Align the tube with the holding position and push down to fit it into the holding part.

r Pull up a tubing to remove it from the holder.

How to Use

Model

Tubing Release Tool

Series TG

Double Layer Tubing Stripper

Series TKS

Variations

Series MQR Rotary Joint

Fittings & Tubing

1494

Low Torque Metal Seal Type Rotary Joint

Series MQR

Specifications

How to Order

FeaturesStart-up torque unaffected by supply pressure and temperature fluctuations.Use of metal seals prevents the spool from sticking to the rotating surface even after a long period of non-operation.Operating pressure - 100kPa - 1MPa.Piping ports are aligned in a spiral line for easy piping.

Ball bearing

Spool(Metal seal)

Sleeve(Metal seal)

Body

Adapter plate

Construction

1 circuit, 2 circuits, 4 circuits, 8 circuits, 12 circuits, 16 circuits1 circuit, 2 circuits, 4 circuits, 8 circuits, 12 circuits

16 circuits

Connection diameter

Number of circuits

Low torquerotary joint(Metal seal type)

Options

Note: No flange type in 1 circuit system

Nil StandardF Note) Flange

1 circuit2 circuits4 circuits8 circuits12 circuits

Number of circuits Flange part number2 circuits MQR2-F4 circuits MQR4-F8 circuits MQR8-F12 circuits MQR12-F16 circuits MQR16-F

Model MQR1-M5 MQR2-M5 MQR4-M5 MQR8-M5 MQR12-M5Number of circuits (Number of ports) 1 2 4 8 12Fluid Air / Inert gasSeal structure Metal sealGuide structure Bearing supported Bearing supported at both ends

Port size Male R1/8Female M5

M5

Flow ratecharacteristics

C[dm3/(s.bar)] b Cv0.50 0.40 0.17

Lubrication Not requiredMin. operating pressure –100kPaMax. operating pressure 1.0MPa

–10 to 80°C

Max. start-up rotation torque Note 2) 0.003 N·m or less 0.03 N·m or less 0.05 N·m or less 0.10 N·m or less 0.20 N·m or lessAllowable rotation number 3000 min-1 (r.p.m.) or less Note 3) 2000 min-1 (r.p.m.) or less 1500 min-1 (r.p.m.) or less 900 min-1 (r.p.m.) or less 600 min-1 (r.p.m.) or less

1N or less 15N or less 30N or less 40N or less 50N or less

WeightAllowable axial load

0.025kg 0.16kg 0.39kg 0.76kg 1.26kg

MQR16-M516

0.50 N·m or less200 min-1 (r.p.m.) or less

50N or less

2.80kg

Ambient temperature and operating fluidtemperature Note 1)

Allowable radial load(allowable coupling axisreaction) Note 4)

M5

MQR F 4 M5M5

12481216

Note 1) The temperature 80 °C includes temperature rise during rotation.Note 2) The rotational torque does not change with the supply pressure or with non-use (remains within allowable torque), but it does change with the rotational

speed.Note 3) If using at a speed above 600 min-1 (r.p.m.), ensure rotation is in the direction in which the joint is fastened.Note 4) Rubber / resin couplings are recommended due to their excellent absorption of off center, shocks, and vibrations.

Options/Mounting Bracket

Rotary Joint Series MQR

Fitti

ngs

& T

ubin

g

1495


MQR1-M5

MQR4-M5

MQR2-M5

M4thread length 8

2-M3 thread length 6P.C.D.29

4-M5ø10 counter bore depth 1.5

∗ Flange: MQR2-F (for MQRF2-M5)

∗ 4-ø3.5 mounting hole

∗ 35∗ 29

ø3+0.1 0 depth 10

±3 0.0

5.4

2.862

5.65.3

1

1

2

2

)43( 052

ø15h8

ø35h8(10 from end)

ø15H8

41∗ 5

1 2

(6)

32 2-M3 thread length 8P.C.D.29

∗ Flange: MQR4-F(for MQRF4 - M5)

ø3+0.1 0 depth 10

M5 thread length 10

±0.03

ø20h8ø44h8

(10 from end)

2-M4 thread length 8P.C.D.38

5.5 2-M3 thread length 6P.C.D.38


∗5 4

∗73

207

∗ 5)55(

31

72

1

32

4

5.65.3

6.42 = 3 x 2.82.8 = P

8-M5ø10 counter bore depth 1.5

ø20H8(ø8)

1

2

341

4

4º5

∗ Symbol indicates flange dimensionsDimensions: Standard Type/Flange Type

ssorca htdiW

41 :stalf

ssorca htdiW

7 :stalf

(16.2)M5

ø14

ø7.6

512 43

)8(

R1/8M5

MQR8-M5

M6 thread length 10 4-M3thread length 6P.C.D.43

∗ Flange: MQR8-F(for MQRF8 - M5)


∗50

∗41

ø4.1 0.05 depth 10

0.037

ø49h8 0

0.033ø25h816-M5 ø10 counter bore depth 1.5

378 501

51∗

5

(10 from end)

12

43

56

87

5.75.4

922.8

74.75

P2 .8

ø25H810

12

3

45

6

7

8

462-M4thread length 8P.C.D.43

P54 º

22.5

Series MQR Rotary Joint

Fittings & Tubing

1496

∗ Symbol indicates flange dimensionsDimensions: Standard Type/Flange Type


∗ Flange: MQR12-F(for MQRF12-M5)

+0.05ø4.1

±0.038

∗ 4-ø8 counter bore 5.5ø4.5 mounting hole

M6thread length 10

∗55

∗5 4

depth10

24 x M5ø10 counter bore depth1.5

0- 0.033

ø54h8

ø30h8(10 from end)

3021 041

71∗ 7

(10)ø30H8

5.5

139

2.09 = 11 x 2.82.8 = P

12

345

67

89

1011

12

º54 º54

4-M3thread length 8 P.C.D.4851

P=30º

1 23

4

5

6789

10

11

12

MQR12-M5

ø5.1±0.05±0.03depth 8

MQR16-M5

P=225. °

(ø19)5.01 ø40H8

34° 34°

7361

61

10

∗65

∗55

65 ° 65 °

5 .781∗7

5.71

321=51 x 2.8 2.8=P5.73

5.5

ø64h8

ø45h8

16-M5ø10 counter bore 1.5

∗ Flange: MQR16-F(for MQRF16-M5)

1312

54

1615

14

1312

1110 9 8

7654

321

4-ø8 counter bore 5.5ø4.5 mounting hole

M8 thread length 10


(10 from end)

1615

14

1110

98

7 6

32

1

16-M5 ø13.5 counter bore 1


Blow Gun Series VMG

Fitti

ngs

& T

ubin

g


Blow Gun

Series VMG

Specifications

FeaturesSpecial valve design and construction saves energy.

Choice of bottom or top piping.

Selection of nozzles can be added (see KN section).

Threaded or one-touch connection.

Typical pressure loss is less than 1%.

Effective sectional area 30mm². (Without Nozzle)

Provides constant trigger force irrespective of the supply pressure.

How to Order

Blow gun Nozzle

Nil010203041112132122232431323334

Type Nozzle modelWithout nozzleKN-R02-100KN-R02-150KN-R02-200KN-R02-250

KNH-R02-100KNH-R02-150KNH-R02-200

KNS-R02-075-4KNS-R02-090-8KNS-R02-100-4KNS-R02-110-8KNL3-06-150KNL3-06-200KNL6-06-150KNL6-06-200

ø1ø1.5ø2

ø2.5ø1

ø1.5ø2

ø0.75 x 4ø0.9 x 8ø1 x 4

ø1.1 x 8ø1.5ø2

ø1.5ø2

Nozzle size

VMG 1

Series

Piping entry

Body colour

01W

1 Resin body lever type

1 BottomTop2

Standard type

W Urban whiteDark blueBU

Connection size

F02F0311

Piping connection system

Screw-in type

With S coupler plug

Port size

Plug part no.

Size and part no.1/43/8

KK4P-02MS

Note 1)

Male thread nozzle

High efficiency nozzle

Low noise nozzlewith male thread

Copperextensionnozzle

Length 300mmLength 600mm

Fluid

Operating pressure range

Proof pressure


Effective area

Port size

Piping entry

Nozzle port size

Weight

Operational force (when the valve is fully open)

Air

0 to 1.0MPa

1.5MPa

5 to 60 C (With no freezing)

30mm2 (without nozzle)

1/4, 3/8

Rc1/4

180g

7N

TopBottom

Note 1) One piece of H06-02 self-align fitting is attached.

Bottom Piping Top Piping

When a copper extension nozzle is ordered separately, a self-align fitting will also be required for connection. Order one with the above part number in addition to the nozzle.

F03

Series VMG Blow Gun

Fittings & Tubing

1498

Dimensions

Provides constant operational force irrespective of the supply pressure Pressure loss

0 1.0

Conventional product

Ope

ratio

nal f

orce

Supply pressure (MPa)

Larg

eSm

all

Blow Gun VMG

0

0.01

0.02

0.03

0.04

0.05

0 0.2 0.4 0.6 0.8 1 1.2Supply pressure (MPa)

Pres

sure

loss

(MPa

)

∗Male thread nozzle ø2.5

0.005MPa pressure loss at 0.5 MPa

23

23

A

172.

5

34.2

30

147

117.5102

A

30

156

117.5102

S coupler plug mounting

1/4, 3/8

Width across flats 22

1/4, 3/8

Width across flats22

VMG12/Piping entry: Top

VMG11/Piping entry: Bottom

S coupler plug mounting

1/4

1/4

Type Nozzle modelKNS-R02-075-4KNS-R02-090-8KNS-R02-100-4KNS-R02-110-8KNL3-06-150KNL3-06-200KNL6-06-150KNL6-06-200

Low noise nozzle with male thread

Copper extension nozzle(with self align fitting H06-02)

Nozzle sizeø0.75 x 4ø0.9 x 8ø1 x 4

ø1.1 x 8ø1.5ø2

ø1.5ø2

A12121212

305.3305.3605.3605.3

Type Nozzle modelKN-R02-100KN-R02-150KN-R02-200KN-R02-250

KNH-R02-100KNH-R02-150KNH-R02-200

Male thread nozzle

High efficiency nozzle

Nozzle sizeø1

ø1.5ø2

ø2.5ø1

ø1.5ø2

A23.423

22.522.1444444

34.2

Note 1) Note 1)

Note 1) Reference dimensions after installation

mm mm

Nozzle

Nozzle

Not

e 1)

Not

e 1)

Nozzles for Blowing Series KN

Fitti

ngs

& T

ubin

g

1499


Specifications Nozzle (KN, KNK, KNH, KNS, KNL)

Nozzles for Blowing

Series KNNozzle system for air blowing and back pressure sensing.

Complete range of delivery nozzles with different fittings.

Lower air consumption for dramatic cost savings in use.

Deliver a controlled amount of air where needed.

Consistent performance for assured results.

Easier to set up than improvised nozzles and jets.

Features

Sensing head (KNP)Applicable tubing materialApplicable piping O.D. mmFluidMax. operating pressureAmbient and fluid temperature

Seal for R threads

Threads MountingNut

Nylon, Soft nylon, Flexible copper pipe (C1220T), OST pipeø4, ø6, ø8, ø10, ø12, ø16, ø20

Air, Coolant1.0MPa (0.3MPa with SGP pipe)

-5 to 60˚C (with no freezing)JISB0203 (taper threads for piping)

JISB0211, class 2 (taper threads for piping)None

Applicable fitting sizeFluidMax. operating pressure (at 20˚C)Ambient and fluid temperature

ø4Air

0.8MPa-5 to 60˚C (with no freezing)

(mm)

KN-04-100KN-04-150KN-06-100KN-06-150KN-06-200KN-08-150KN-08-200KN-10-250KN-10-300KN-10-350KN-10-400KN-10-600KN-12-350KN-12-400KN-12-600KN-16-400KN-16-600KN-20-400KN-20-600

ø1ø1.5ø1ø1.5ø2ø1.5ø2ø2.5ø3ø3.5ø4ø6ø3.5ø4ø6ø4ø6ø4ø6

ø4ø4ø6ø6ø6ø8ø8ø10ø10ø10ø10ø10ø12ø12ø12ø16ø16ø20ø20

10101212121414141414141417171722222626

10101212121414171717171719191924242727

27 27.730.130.831.533.834.635.636.337.129.527.740.441.331.240.138.445.643.9

15151616161616171717171717171717171717

L 1 L 2H1 H2

L2

L1

øDH2H1

Nozzle with self-align fitting/KN

Model D

KN-R01-100KN-R01-150KN-R02-100KN-R02-150KN-R02-200KN-R02-250KN-R02-600KN-R03-400KN-R03-600KN-R04-400KN-R04-600KN-R06-600KN-R06-800KN-R10-800

ø1ø1.5ø1ø1.5ø2ø2.5ø6ø4ø6ø4ø6ø6ø8ø8

R1/8R1/8R1/4R1/4R1/4R1/4R1/4R3/8R3/8R1/2R1/2R3/4R3/4R1

1010141414141417172222272736

21.42131.43130.530.127.131.830.141.840.149.647.862.8

17.41725.42524.524.121.125.423.733.631.840.13852.4

(mm)

Model Nozzle sizeD

Connectionsize L 1 A

Width across flatsH1

A

L1

øD

H1

Connection thread

Nozzle with male thread/KN

Nozzle size Connectionsize

Width across flats

Series KN Nozzles for Blowing

Fittings & Tubing

1500

KNL3-06-150KNL3-06-200KNL3-08-200KNL3-08-250KNL3-10-250KNL3-10-300KNL6-06-150KNL6-06-200KNL6-08-200KNL6-08-250KNL6-10-250KNL6-10-300

ø1.5ø2ø2ø2.5ø2.5ø3ø1.5ø2ø2ø2.5ø2.5ø3

ø6ø6ø8ø8ø10ø10ø6ø6ø8ø8ø10ø10

300300300300300300600600600600600600

Copper extension nozzle/KNL(mm)

Model D Outside diameter L 1

øD L1

O.D

.

Low noise nozzle with male thread: KNS

Model Nozzle sizeD L 1 AWidth across flats

H1KNS-R02-075-4KNS-R02-090-8KNS-R02-100-4KNS-R02-110-8

ø0.75 x 4ø0.9 x 8ø1 x 4ø1.1 x 8

R 1/4R 1/4R 1/4R 1/4

14141414

20202020

14141414

(mm)

Model DConnection

thread L 1 AWidth across flatsH1

KNH-R02-100KNH-R02-150KNH-R02-200

ø1ø1.5ø2

R 1/4R 1/4R 1/4

141414

525252

464646

(mm)

AL1

øDH1

Connection thread

Self-align fitting (For copper extension nozzle connection).

Half unioneg: H06-02

The air blow thrust isimproved by 10%.

High efficiency nozzle:KNH

øD

2

A

L1

ConnectionthreadH1

KN-Q06-100KN-Q06-150KN-Q06-200KN-Q08-150KN-Q08-200KN-Q10-200KN-Q10-250KN-Q12-250KN-Q12-300

ø1ø1.5ø2ø1.5ø2ø2ø2.5ø2.5ø3

ø6ø6ø6ø8ø8ø10ø10ø12ø12

3535353939434345.545.5

18181820.520.522222424

Nozzle for One-touch fitting/KN (mm)

Model D L 1 A

øD

L1

A

10

Note) Applicable only for use with SMC KQ fittings.

(mm)

Model DConnection

size L 1 L 2Width across flatsH1 H2

KNK-10-400KNK-10-600KNK-12-400KNK-12-600KNK-16-400KNK-16-600KNK-20-400KNK-20-600

ø4ø6ø4ø6ø4ø6ø4ø6

ø10ø10ø12ø12ø16ø16ø20ø20

1717171717171717

1717191924242727

41.741.741.241.241.841.843.843.8

1717171717171717

35°

L1L2

øD

8.5H2

Pivoting nozzle with self-align fitting/KNK

Nozzle size

Nozzle size

Connectionsize

Connectionsize

Nozzle size

Nozzle size

Nozzles for Blowing Series KN

Fitti

ngs

& T

ubin

g

1501


Model Nozzle sizeD

Connectionsize L 1 A

Width across flatsH1 H2

Model Nozzle sizeD

Connectionsize L 1 L 2

Width across flatsH1 H2

KNK-R02-400KNK-R02-600KNK-R03-400KNK-R03-600KNK-R04-400KNK-R04-600

ø4ø6ø4ø6ø4ø6

R1/4R1/4R3/8R3/8R1/2R1/2

171717171717

171717172222

3838393942.242.2

31.931.932.432.434.134.1

KNS-08-075-4KNS-08-100-4KNS-10-075-4KNS-10-090-8KNS-10-100-4

ø0.75 x 4ø1 x 4ø0.75 x 4ø0.9 x 8ø1 x 4

ø8ø8ø10ø10ø10

1212141414

1414171717

24.324.3242424

1616171717

(mm)

(mm)

L2

L1

øD

2H2H1

35°

øD

L1A

8.5

Connection thread

H2H1

Pivoting nozzle with male thread/KNK

Low noise nozzle with self-align fitting/KNS

Sensing Heads

H2H1

øD

L1 L2

øDA

L1L3

L2

L 1 L 2H1 H2

KNP-1 ø2.5 ø4 5 8 63.7 1000

L 1 L 2H1

KNP-2 ø0.7 ø4 5 41

A

12.7 1000

L 3

23

(mm)

(mm)

Model

Model

D

D

Standard sensing head

Needle sensing head

Polyurethane tubing

Cas

sette

siz

e

Polyurethane tubing

Connectionsize

Connectionsize

Nozzle size

Nozzle size

Documents

One-Touch Mini Fittings KJ · Series KJ One-Touch Mini Fittings Fittings & Tubing 1414 KJH Straight Union Tubing Tubing KJH Different Diameter Straight KJE Bulkhead Union KJT Dfferent