Embed Size (px)
Citation preview
Toll Free: 1 866 761-1535 | www.mastermeter.ca
See reverse side for more specifi cations »
The easy and reliable upgrade for DIALOG registers.
The Master Meter Dual Switch Output Module provides a reliable signal between the DIALOG register and the DIALOG 3G External Transceiver. Completely potted for superior moisture protection.
Factory tested to 50,000,000 cycles. Reed Switch assembly is provided from the factory sealed with 4 feet (1.2 m), 24 gauge, 2-conductor stranded cable. Remote counting or batching equipment can be installed up to 500 feet (150 m) from meter, connected by 24 gauge, 2-conductor stranded cable (if equipment allows, most electronic counters only allow up to 30 feet [9 m]).
BENEFITS & FEATURES
• For use with all Master Meter water meters equipped with DIALOG registers
• Durable casing, 24 gauge cable
• Potted with proprietary resin impervious to moisture penetration
• Factory tested to 50,000 cycles
Dual Switch Output Module
ON-SITE METER READING
TECHNICAL SPECIFICATIONS
Description Two switch output assembly compatible with Master Meter DIALOG Register.
Switch Type Dry contact reed Switch Type Proximity Sensor. Factory tested to 50,000,000 cycles.
Case All electronics housed in a durable, engineered plastic case, upgraded to resist moisture penetration and ultraviolet degradation.
Sealing Encoder and connectors potted with proprietary resin impervious to moisture penetration.
Maximum Switch Current
500 mA
Maximum Recommended
Switching Voltage
32 volts (AC or DC)
WARNING: We recommend contacts be kept within the parameters stated
Contact Resistance
70 ohms
Power Requirements
Dual Switch Output Assembly has no power supply of its own. Power derived from external source such as the peripherals attached to it.
Compatible Equipment
LCD Remote Counter, RF Transmitters, Electrical/electronic counters, totalizers, or actuators, or any equipment requiring single or double closed contact input.
Wiring/Distances Reed Switch assembly is provided from the factory sealed with 4 feet (1.2 m), 24 gauge, 2-conductor stranded cable. Remote counting or batching equipment can be installed up to 500 feet (150 m) from meter, connected by 24 gauge, 2-conductor stranded cable (if equipment allows, most electronic counters only allow up to 30 feet [9 m]).
Warranty One year from date of shipment.
| [email protected] | Phone: 877.566.3837 | Fax: 925.407.2903
Master Meter Canada • 100 Lansdowne Street, Suite 207 • St-Bruno, Québec J3V 0B3 Toll free: 1 866 761-1535 • Phone: (450) 461-1535 • Fax: (450) 461-3720
www.mastermeter.ca [email protected]
©2005 Master Meter, Inc. All rights reserved. DIALOG and Master Meter are registered trademarks of Master Meter, Inc. Master Meter reserves the right to make modifications to the products described herein at any time and without notice. U.S. Patent No. 6,819,292, Patent No. 6,954,178. Others pending. EnviroBrass® is a registered trademark of ASARCO.
Distributed by:
Dual Switch Output Module
MMDS_D3GDSO_CEN Rev16/05/06
| [email protected] | Phone: 877.566.3837 | Fax: 925.407.2903
