ON MARKET ANALYSIS ON ELECTRICITY GENERATION …setmnepal.org/images/downloads/1427693550market_analysis_on... · Technology Management Pvt. Ltd (SETM) has prepared this Draft Report

FINAL REPORT ON

MARKET ANALYSIS ON ELECTRICITY GENERATION TECHNOLOGIES FROM BIOGAS

Submitted to: Submitted by: Alternative Energy Promotion

Center (AEPC) National Rural and Renewable Energy Programme (NRREP)

PO Box: 14364, Khumaltar Height Lalitpur Phone: +9771-5539390/5536843

Fax: 5539392 Website: www.aepc.gov.np

Sustainable Energy and Technology Management

(SETM) Kamaladi, Kathmandu

Nepal Phone: +9771-4412078

Email: [email protected] PO Box No: 7039

APRIL, 2014

http://www.aepc.gov.np/�

Market Analysis on Electricity Generation Technologies from Biogas Page 2

Sustainable Energy and Technology Management (SETM)

FIN

AL

REP

OR

T

Acknowledgement

We would like to express our sincere gratitude to AEPC/NRREP for entrusting us to conduct

Market Analysis on Electricity Generation Technologies from Biogas. We would like to express

deep acknowledgement to Prof. Dr. Govinda Raj Pokharel, Executive Director of AEPC. The

special thanks and gratitude goes to Mr. Samir Thapa, Assistant Director of AEPC/NRREP for

giving his invaluable suggestions and kind cooperation to complete the study. We are indebted

to Mr. Uttam Kumar Jha , Advisor of biogas sub-component/AEPC/NRREP. Also our team is

very grateful to Mr. Sushim Man Amatya, Program Officer of AEPC/NRREP, Mr. Sujesh

Shrestha, Mr. Anupam Bhusal and other valuable staffs of AEPC/NRREP for their support and

guidance in completing this study.

Lastly, but not the least, our sincere thanks go to all SETM officials/staffs for their hard work in materializing this task. __________________________ Sharada Shrestha Managing Director Sustainable Energy and Technology Management P. Ltd. (SETM) Kamaladi, Kathmandu April, 2014



FIN

AL

REP

OR

T

Acronyms/Abbreviations

AEPC : Alternative Energy Promotion Centre

BSP-Nepal : Biogas Sector Partnership Nepal

GoN : Government of Nepal

HS CODE : Harmonized Commodity Description and Coding System

IC : Internal Combustion

ISO : International Organization for Standardization

kW : Kilo Watts

MoEST : Ministry of Environment, Science and Technology

NAST : Nepal Academy of Science and Technology

NRREP : National Rural and Renewable Energy Programme

PIT : Product Introduction Test

PSA : Pressure Swing Adsorption

RETs : Renewable Energy Technologies

RETS : Renewable Energy Test Station

RMA : Rapid Market Analysis

R&D : Research and Design

SETM : Sustainable Energy and Technology Management (SETM)

SNV : The Netherlands Development Organization

TOR : Terms of Reference



FIN

AL

REP

OR

T

Table of Contents Acknowledgement ...................................................................................................................................... 2 Acronyms/Abbreviations ............................................................................................................................ 3 1 Introduction ......................................................................................................................................... 6

1.1 Background ................................................................................................................................... 6 1.2 Our Understanding on Development and Application of Biogas Generator ................................ 7 1.3 Objectives ...................................................................................................................................... 8 1.4 Limitations of the Study ................................................................................................................. 8

2 General Approach and Methodology ................................................................................................ 9 2.1 Study Approach ............................................................................................................................. 9 2.2 Methodology ................................................................................................................................ 11

2.2.1 Determination of survey tools……………………. ................................................................ 11 2.2.2 Mapping of Supply Side of Biogas Generator and Accessories ........................................ 11 2.2.3 Assessment of Biogas Electrification Technologies ............................................................ 11 2.2.4 Supply Chain Analysis……………………………. ................................................................ 11 2.2.5 Preparation of Inventory………………………. .................................................................... 12 2.2.6 Development of Testing and Commissioning Plan ............................................................. 12

3 Analysis and Findings ...................................................................................................................... 13 3.1 Overview of large biogas development in Nepal ......................................................................... 13

3.1.1 Biogas Electrification Status in Nepal ................................................................................. 14 3.2 Case study (Prefect Bio-Waste & Power Management Pvt. Ltd. In India ) ................................. 16 3.3 Conceptual framework of Biogas Electrification .......................................................................... 17 3.4 Various technological options for Biogas power generation ....................................................... 18

3.4.1 Electricity Generation Components ..................................................................................... 19 3.5 Biogas Purification and other spare parts ................................................................................... 22

3.5.1 Water scrubber technology ................................................................................................. 22 3.5.2 Compression and Storage .................................................................................................. 23 3.5.3 CO2 Scrubbing Unit ............................................................................................................. 23

3.6 Identification of appropriate biogas electrification generator for Nepal ....................................... 24 3.7 Inventory of biogas electrification components manufacturers/suppliers ................................... 24

4 Supply Chain Mechanism, Cost for Biogas Generators, Possible Suppliers in Nepal .............. 26 4.1 Supply Chain Mechanism ........................................................................................................... 26 4.2 Cost Price of Biogas Generator Sets .......................................................................................... 28 4.3 Factors affecting for biogas electrification ................................................................................... 30 4.4 Freight Forwarders for Biogas Electrification .............................................................................. 32 4.5 Potential Suppliers for Biogas Generator Sets ........................................................................... 32

5 Testing/Commissioning Procedures .............................................................................................. 33 5.1 General criterias for testing/commissioning ................................................................................ 33 5.2 Certification/testing verification of appliances/equipments ......................................................... 36 5.3 Basic Requirements for the Sustainability of Biogas Electrification Project ............................... 36 5.4 Warranty/guarantee plan ............................................................................................................. 37

6 Conclusion and Recommendations ................................................................................................ 38 6.1 Conclusion ................................................................................................................................... 38 6.2 Recommendations ...................................................................................................................... 38

References ................................................................................................................................................. 39 Annexes ..................................................................................................................................................... 40

Annex 1: List of Generator Set Manufactures/Suppliers ......................................................................... 41 Annex 2: List of Flow Meter Manufactures/Suppliers ............................................................................. 63



FIN

AL

REP

OR

T

Annex 3: List of Pressure Meter Suppliers .............................................................................................. 72 Annex 4: List of Biogas Desulfurizer Suppliers ....................................................................................... 76 Annex-5 List of Control Panel Suppliers ................................................................................................. 79 Annex-6 Checklist for Market Analysis on Electricity Generation Technologies from Biogas ................ 82

List of Figures Figure 1: General Study Approach ............................................................................................................. 10Figure 2: A diagram showing the biogas electrification process ................................................................. 17Figure 3: Schematic Diagram for Conversion of Biogas Engine from Diesel Engine ................................. 19Figure 4: Water Scrubbing Flow Diagram ................................................................................................... 23Figure 5: CO2 scrubber unit ........................................................................................................................ 24Figure 6: A Model of Generator Supply Chain Mechanism in Nepal .......................................................... 26Figure 7: An example of price variation of same capacity biogas generator sets ...................................... 28Figure 8: End Use applications of large biogas system .............................................................................. 30Figure 9: Commercial market approach for biogas electrification ............................................................... 31 List of Tables Table 1: Potential areas of commercial biogas power generation .............................................................. 14Table 2: Cost details of biogas electrification project in Devghat ............................................................... 15Table 3: Specifications of the biogas generators ....................................................................................... 20Table 4: Number of companies contacted during study period .................................................................. 25Table 5: Cost price of biogas generator sets ............................................................................................. 28Table 6: Testing and commissioning format for biogas electrification project ............................................ 33 List of Boxes Box 1: Biogas Electrification Project in Devghat, Chitwan .......................................................................... 15Box 2: Gas Turbine used for large scale biogas electrification project ....................................................... 18Box 3: Tax and custom duties for supplying generators in Nepal .............................................................. 27Box 4: An example of cost price of a generator set .................................................................................... 27



FIN

AL

REP

OR

T

1 Introduction

Sustainable Energy and Technology Management Pvt. Ltd (SETM) has prepared this Draft Report on “Market Analysis on Electricity Generation Technologies from Biogas”. SETM has submitted the Final Report to Biogas Sub Component of National Rural & Renewable Energy Program (NRREP)/Alternative Energy Promotion Centre-AEPC as per the contract agreement on date 15th February 2014. The Government of Nepal (GoN) and External Development Partners supporting Nepal's rural and renewable energy sector has resulted in National Rural and Renewable Energy Programme (NRREP) to be implemented by AEPC for five years from mid‐July 2012 to mid‐July 2017 in a single programme modality. Biogas is the prominent sub‐component and NRREP targets to install 130,000 Domestic Biogas, 1250 Community and Institutional Biogas. NRREP has also introduced Waste to Energy for thermal and electricity production.

1.1 Background Biogas product diversification and innovation of domestic biogas sector as well as introducing biogas in the business enterprises are not yet started in Nepal with clear strategy. Indeed, there is a necessity to introduce product innovation for enhancing the efficiency, durability and compatibility of biogas technology for new market segments like institutional biogas and introducing financial product development which will ensure timely disbursement of credit facilities through financial streams like climate investment and RET products insurance, will cover the post installation cares, maintenance of biogas units and thereby, promoting the sector. Besides, issues around equitable distribution, productive end-uses of the gas and slurry, and sustainability of the private sector are also major concerns. So far, little has been done, and in the upcoming programmes in the renewable energy sector, viz., National Rural and Renewable Energy Programme (NRREP). Although there is still lack of sufficient information, Nepal has a good potential for commercial based biogas plants. Some of the potential industries for large scale biogas plants includes poultry farms, cow farms, pig farms, slaughter houses, agro processing industries, schools, housing complex etc. Due to lack of technical know-how and proper up front financing mechanism, commercial biogas plants are not developed much in Nepal. The gas produced from large-scale biogas plant can be optimally utilized in many ways. The gas can be directly used for heating purpose and/or can be optimally utilized to generate electricity by producing biogas in various enterprises and institutions. The gas after certain purification can be injected to the diesel generator and replace the fuel. Similarly, the gas can be used as input fuel for thermal generator to generate electricity. This will serve not only providing electricity, it also help to reduce the exposure of greenhouse gases and manage the waste. Scaling up the biogas sector in Nepal will favor the feasibility of the current use of biogas from cooking and heating purposes to electricity production. Lack of electricity is one of Nepal’s most pressing issues, affecting the economic development of the country and leading to the utilization



FIN

AL

REP

OR

T

of fossil fuels, which harm the environment. Biogas used for electricity production purposes could represent a viable, environmentally sound alternative to fossil fuel powered generators, at the same time as act as means for fostering other productive end-uses. Furthermore, electricity production from biogas plants could be distributed to nearby communities, local business or industries, reducing the dependency on fossil fuels and increasing the availability of electricity during load shedding hours. In last couple of years, some discussions have been undergoing to use gas from the large scale biogas plants for generating electricity to meet their own demands. AEPC and SNV Nepal have conducted few studies in this regard. The power generation from gas generator is well known and proven technology in many other countries as well as Nepal. Therefore, there is a need for a market survey and analysis of technological options available for generation and distribution of electricity from biogas plant in Nepal.

1.2 Our Understanding on Development and Application of Biogas Generator Experiments on using biogas as a fuel for running internal combustion engines in general and for running generator in particularly have been conducted since the 1930s. So far, it has been spreaded to many countries in the world.

Biogas is a fuel that in Europe in general has primarily been regarded as a fuel suitable for electricity generation in gas engines. The solution of hybrid engine was successfully studied and applied. The two countries that account for the largest biogas production in Europe are Germany and England. The countries with the highest biogas production per capita are the UK, Sweden, Denmark, Switzerland and the Netherlands.

Presently, biogas generator are broadly developed and applied in many countries in the world, both developed countries and developing countries. The two countries that account for the largest biogas production in Asia are China and India. Biogas is used mostly for cooking, lighting and running power generator. At present, millions of biogas digesters have been constructed in China contributing in the increase of power yield and gradually replace the utilization of firewood for civil activities. A large number of Chinese companies have exported their products including biogas digesters to other countries. Similarly, India has been implementing the rural energy program since the 1990s. Under the program millions of biogas plants have been constructed, providing fuel for lighting, cooking and generating electricity.

Biogas generators are diversified in terms of engine, capacity and technical parameters (starting method, gas pressure, size, fuel consumption rate etc.). High capacity biogas generators are applied when biogas is supplied from big cities or the sewage treatment plants. Whereas, small and medium biogas generators are applied when biogas is supplied from domestic scale biogas plants at households or animal farms (normally, the digestion volume is less than 200 cubic meters). In Nepal, 2, 4, 6, 8 m3 sizes are domestic plants. Biogas electrification not applicable for domestic biogas plants, it is suggested to apply electrification projects only for large biogas plants.



FIN

AL

REP

OR

T

Nepal pays high attention in saving and increasing the efficiency of energy utilization and improvement of environmental sustainability. Under this target, biogas has been main object of researches/studies as fuel for biogas generator. Few experiments/demonstration projects for biogas electrification have already been done however not established as a good market yet.

1.3 Objectives The main objective of the assignment as stated in the ToR is to conduct a market analysis study and recommend appropriate technological alternatives for electricity production and distribution from biogas in Nepal. More specifically, the study aims to identify the followings:

• Value chain study on biogas electrification technology and recommend suitable option for Nepal

• Develop a testing and commissioning plan of biogas electrification technology • And preparation of monitoring plan

1.4 Limitations of the Study The following were the major limitations of this study; The study was entirely based on the secondary information The information obtained were mostly from internet based The information available is limited. The difficulty lies with the vast and unlimited number

of items under the study. The cost details were fully relay on secondary source and short time was another

constrain.



FIN

AL

REP

OR

T

2 General Approach and Methodology

2.1 Study Approach Based on the thorough understanding of the assigned objectives, SETM team has prepared an approach and methodology in line with principal underlying issues to be addressed while providing its professional consulting services. SETM intends to apply the conceptualized strategic approach as listed below:

Documentation

Participatory Approach

Consultation, coordination and interaction with the client and other concerned

stakeholders

Decentralized planning and management

Institutional strengthening and capacity building

Holistic approach for sustainability

Ensuring the consistency

Cost benefit analysis

Risk assessment



FIN

AL

REP

OR

T

Phases

Activities

Output

1st Phase Inception

2nd Phase Study

3rd Phase Data

Analysis

Review of the secondary sources: • Collection of literature and reports on energy and other

related documents • AEPC/BSP-Nepal/NBPA publications • Related websites

Preparation of Inception Report: • Table of contents of the report • Preparation of work plan and detailed methodology • Checklist preparation, human resource mobilization • Preparation of Inception Report

4th Phase Finalization

Interaction with Stakeholders on: • Identification of national manufacturers and suppliers of

the biogas treatment equipments • Available Technological options, replacement options,

consumables for biogas treatment processes • other legal provisions required for import of equipment

from international market.

Market Study: • Identify basic characteristics of biogas and other

parameters • Identify major suppliers of biogas engine and correspond • Identify the basic requirements for control/monitoring

panels and suppliers, provision of certification etc. • Identify basic requirements for purification of biogas

Draft Report • Analyze different options for engine-generator sets with their

appropriateness in context of Nepal • Analysis of various technological options based on efficiency,

cost and users need • Prepare cost benefit analysis, possible investment modality, its

financial closure for electricity production and distribution from biogas in Nepal

• Report preparation

Inception Report

Additional Secondary

and Primary Data Generation

Draft Report

Final Report

Final Report • Comments from stakeholders, Recommendations

Figure 1: General Study Approach



FIN

AL

REP

OR

T

2.2 Methodology The following methodologies were applied to conduct the study.

2.2.1 Determination of survey tools The study was conducted by applying the Rapid Market Appraisal (RMA) and Value Chain Analysis (in case of supply chain of biogas generator and accessories ). The RMA tool is appropriate for studies like this to have in a short time a good analysis and understanding of a market. A mix of qualitative and quantitative data types were researched and analyzed based on existing data available and understanding of the market by the SETM study team.

The study was focused to collect three different data set: primary data, secondary data and tertiary data. Primary Data were largely quantitative and collected through questionnaires/checklists.

This information was collected from biogas generator manufacturers/suppliers (retailers/distributors) and those institutions who have already done biogas electrification projects.

Secondary data were collected primarily through Internet searching and correspondences with various manufacturers, users.

Tertiary data were obtained from literature reviews of relevant studies/documents in other countries to get useful information for analysis.

2.2.2 Mapping of Supply Side of Biogas Generator and Accessories To analyze and develop appropriate technological option for biogas generation (up to 20 kWe), a mapping of potential suppliers, manufacturers, local dealers and existing distribution chains in the region (south/east Asian countries) were undertaken. The study team has conducted several interactions with regional manufacturers distributors /retailers/ agents (primarily China and India) and gathered information about the type of products being used, technical specification, efficiency and other specific requirements , major limitations for expansion of their business etc. The study also captured some other information like cost details, provision of after sale services and warranty/guaranty issues, availability of spare parts and their marketing channel. Similarly, the team has closely analyzed the possibility of transfer of technology (fully or partially).

2.2.3 Assessment of Biogas Electrification Technologies For the identification of the most suitable and cost-effective biogas treatment processes for engine use were analyzed in depth. Several factors such as H2S removal unit, biogas volumetric flow ranges, retention period, pressure, temperature and other processing units were considered.

To assess the best biogas generator sets; efficiency of technology, certification, detail electrification specifications with their instrumentation process, performance guarantee of all equipments etc are analyzed.

2.2.4 Supply Chain Analysis Based on the study objectives, the checklist was prepared to identify possible suppliers/dealers of those biogas treatment equipments within country or abroad as well. Also the study has



FIN

AL

REP

OR

T

identified the possible suppliers of replacement parts/consumables or spare parts of the purposed system for both nationally or internationally. The supply chain mechanism of general types generators(diesel/petrol based) and other electrical equipments was studied and based on that reference a detail supply chain framework for biogas generators has been developed.

2.2.5 Preparation of Inventory After selection of biogas based engine-generator sets and associated equipments along with supply chain mechanism the list of suppliers both nationally and internationally has been prepared. For this purpose; SETM team has identified various types of suppliers through their freight forwarder, dealers and other directly concerned stakeholders. The list of suppliers include details of the following appliances with their specifications, cost, warranty/guarantee, customs/duties and other information. Engine-generator sets

Flow meter

Processing Units

Control and monitoring panels

Replacement/spare parts

Storage Systems

2.2.6 Development of Testing and Commissioning Plan After analyzing all market segments, study team has prepared a plan for testing and commissioning. Basic requirements such as success criteria, monitoring system, after sales services etc are considered for the testing and commissioning plan preparation. The basic requirements for the verification and functional performance was analyzed to prepare the testing and commissioning plan. Similarly, the required tools and instruments such as Multimeter for electrical measurements, Ammeter, Power measurement transducer, Calibrated thermometer, flow meter, Miscellaneous hand tools are listed out during plan preparation. Furthermore; general criteria’s of monitoring such as safety, performance and intervention effects were studied. It also contains recommendations on monitoring instrumentation and quality control.



FIN

AL

REP

OR

T

3 Analysis and Findings

3.1 Overview of large biogas development in Nepal A number of biogas plants have already been installed and practiced at community level. Several of those plants were used to run dual-fuel engine in the past. However, due to some social & managerial problems rather than technical, these community plants are not functional for a long period of time in Nepal. Nepal has over half century long history of research and promotion of biogas technology, initially with personal or private attempts. After establishment of Biogas Support Programme (BSP) under the Netherlands Development Organization (SNV) in 1992 and creation of Alternative Energy Promotion Center (AEPC) under the MoEST in 1996, the biogas promotional activities in Nepal has achieved significant momentum. Near about 300 institutional and 90 community size biogas plants installed throughout the country. (Source: SETM, 2012) Majority of these plants are constructed using the design GGC 2047 that is fundamentally underground fixed dome. Larger size biogas plants installed by various organizations without any policy guidelines prescribed for institutional biogas plants. It is essential for the country to invest, promote and construct many more community and institutional biogas plants. The various business segments have good potential for larger size biogas plants. It is essential to have a number of successful larger biogas plants in operation before a widespread dissemination. There is a growing interest for the installation of larger size biogas plants for commercial farms, business companies and institutions for utilizing alternative feedstock like sewerage/night soil, kitchen and vegetable wastes and other biodegradable materials. Indeed, there is a necessity to introduce product innovation for enhancing the efficiency, durability and compatibility of biogas technology for new market segments in potential sector of Nepal. The technological options available today can be optimally utilized to generate electricity by producing biogas in various enterprises and institutions. This can be done in various ways: inject the gas to the diesel generator and replace the fuel or install thermal generator and use the produced gas as an input fuel. This will serve not only providing electricity services to the farm, it also help to reduce the exposure of greenhouse gases and manage the waste. Some of the potential areas for large scale biogas plants includes poultry farms, cow farms, pig farms, slaughter houses, agro processing industries, schools, housing complex, army barrack ,hospital etc. Due to lack of technical know-how and proper up front financing mechanism, commercial biogas power generation projects are not developed yet in Nepal. AEPC has already carried out the detail feasibility studies of biogas power generation in different segments such as poultry farms, cow farms, slaughter houses etc. Similarly, SNV Nepal has initiated the biogas for business program in 2012. Based on the findings of those previous studies; the study team has identified the following sector as potential for biogas power generation in future. Table two shows the some potential segments for biogas power generation in Nepal.



FIN

AL

REP

OR

T

Table 1: Potential areas of commercial biogas power generation

S.N. Particular Segment Description Remarks

1

Commercial Cow Farms

Cow farming now becoming popular and is characterized by traditional small holder farms (10, 12 numbers) to large commercial farms (300 numbers).

2

Commercial Poultry Farms

Poultry farming is one of the motivating enterprises and is concentrated in some parts, primarily the Terai region of the country due to various infrastructure facilities, including electricity. Electricity supply is one of the pre requisites of the poultry farming.

Some poultry farms have already practiced larger biogas plant.

3

Commercial Pig Farms

In comparison to other livestock, crop cycle of pig farming is shorter. It is another potential segment for commercial biogas plants.

Some pig farms have practiced small size biogas plants.

4

Slaughter Houses

Thousands of animals are slaughtered every day in urban and semi-urban areas but there is no proper mechanism of waste management. Larger size biogas plants in commercial way may be a viable option for their waste management in future.

5 Beverage Industry

Beverage industry is another potential segment for commercial biogas.

6 Large Hotels Large/Star hotels are also potential sites for larger size biogas plants

7 Other sector

Corporate or multinational companies/industries, Barracks, Prisons, Community hostels, schools/college, hospitals and other institutions are other potential sites for commercial biogas development in Nepal.

Source: SETM There are huge potential and significant benefits of commercial biogas plants against the current implementation of septic tanks, garbage dumping, incineration and traditional compost pit as well. The market study shows, there is an incredible potential of establishing biogas plants in large number of different business entities in commercial ways where copious bio-degradable wastes are available to produce biogas.

3.1.1 Biogas Electrification Status in Nepal In past, several community biogas plants was used to run a dual-fuel engine. These engines were procured from India (Kirloskar and Usha) and use a very simple gas carburetor and seem to be fairly robust and reliable. The gas from community biogas plants was used to run 5 to 8 HP engines mostly for agro-processing and in a few cases for generating electricity. Near about 30 numbers of such projects were already been established in Nepal although not working properly at this time. (Source: Devkota, 2009) Now both India and China has developed the engines which can fully run with biogas and there is no need of alternate fuel and there is need of CO2 scrubbing. The purpose of CO2 scrubbing unit is to remove the unwanted CO2 from raw biogas dissolving with water. Such engines can be introduced for power generation however it is new technology for Nepal till date.



FIN

AL

REP

OR

T

Table 2: Cost details of biogas electrification project in Devghat

Particulars 20 Cum biogas plant cost Rs. Particulars Electrical

equipment cost Construction materials 92460

Biogas engine with alternator 206250

Biogas appliances including fittings 26731 Main switch

Labour cost 50225 Control Panel 7500 Construction, supervision, after sales, training

38500 Temperature indicator 3750

Company services 20792 RPM indicator 3750

Gas production (cft) 200 Power meter, voltmeter, ammeter, hour meter

31000

Gas production (cm) 5.6 Energy meter 7500 Hour meter 5000 Engine shade 2000 Total 228708 Total 266, 750

Source: UCS, 2010 [The cost of transmission and distribution are not included as using the existing line]

Box 1: Biogas Electrification Project in Devghat, Chitwan

With the support from AEPC, the Universal Consultancy P. Ltd., Kathmandu had installed biogas generator in Yogi Narahari Nath Asram, Chitwan district of Nepal. There was already a 20 cum biogas plant feeding with cattle dung installed in 2059 BS. The overall management of installed system was done by Bageshwori Adhyadhmik Parishad. As provided information by Mr. Shanta Prasad Pokharel, president of Asram; biogas system is working but electrification process stopped after six months of establishment. The technical specification of installed biogas generator was as follows; Rated Power Output: kW 2.5 Gas Consumption: 0.8 - 0.9 Cum/KWH Methane in Biogas: 50 - 55% Lubrication Oil Capacity: 5 Ltr. No. of Cylinder: One Output Voltage: 230 Volt, 1 Phase Power factor: 0.8

Biogas Electrification at Devghat (Photo Source: SETM)

Total cost of installation was NRs. 266,750.00. Desulfurising and dehydrating units were not installed in that scheme; that was the main reason for not running engine for longer period.



FIN

AL

REP

OR

T

Recently, another biogas electrification project has been established in Shobhabhagawati, Kathmandu jointly by Kathmandu University and Water Aid Nepal. The general description of established project is given below:

Biogas generator set features: Capacity: 650 watt Output AC voltage: ac 220 V DC output: 12 V Rated current: 8.3 A Automatic voltage regulator 6.5 Hp Warranty: 1.5 years

The installed capacity of biogas generator is 650 Watt. Total installation cost of biogas electrification system is around Rs 3,50,000. Particularly, the cost of biogas generator set is Rs 2,50,000 including Tax/VAT and flight charge. The technical parts of the project were installed by Kathmandu University whereas Water Aid Nepal provided financial support. The size of biogas digester is 12 cubic meter. Till date, biogas electrification system is in operational condition. Basically it is used for lighting purpose in nearby households. Altogether 15 bulbs are connected and run nearly 3 to 4 hours per day if sufficient amount of gas is available. For the smooth operation of biogas generator there 11-12 KPa gas pressure is required. Local people are happy to have electricity from biogas in their households.

They use biogas desulfurizer for removal of hydrogen sulphide, but hydrogen sulphide decreases the biogas production up to 3 to 4 KPa, now desulfurizer unit is replaced. The cost of biogas desulfurizer is Rs 200. The gas generated from biogas generator is also used in cooking purpose.

3.2 Case study (Prefect Bio-Waste & Power Management Pvt. Ltd. In India ) Perfect Bio-Waste and Power Management Pvt. Ltd is the oldest organization in India working continuously in the field of energy generation such as BIO GAS/ BIO MASS and other renewable energy source. The selected project area are rural and interior parts of India.

The organization was already installed many bio-electrification project by using poultry waste, vegetable waste, cow dung and algae. Thus established projects are successfully run in around the India. The digester capacity for poultry waste was three hundred and ten meter cube; similarly digester capacity for cow dung was twenty five hundred meter cube; these are the some examples. The details about capacity, digester feed, power generation capacity, industry used, area and the commissioning year is provided in the Annex part.

The organization has the wide range of Biogas Generators from 3 KVA to 125 KVA, which are specifically to perform extreme weather condition and tough rural running condition. They are offering complete solution on renewable energies, have experience of more than 200 installation of biogas generators, provides more tested product.

Photo 1: Installed biogas generator at Shobhabhagawati Source: SETM, 2014



FIN

AL

REP

OR

T

3.3 Conceptual framework of Biogas Electrification The gas produced from an anaerobic process contains Methane, moisture Hydrogen Sulfide, Carbon dioxide and other impurities. The average calorific value of biogas is about 21-23.5 MJ/m³, so that 1 m³ of biogas corresponds to 0.5-0.6 litre diesel fuel or about 6 kWh (FNR, 2009). The biogas yield of a plant depends not only on the type of feedstock, but also on the plant design, fermentation temperature and retention time. Methane has a high calorific value in its pure stage. If the moistures and other impurities especially sulfide gas are properly separated the pure methane is suitable for Internal Combustion (IC). Once pure Methane is available in suitable quality and quantity it finds a wide scope of electricity generation.

Biogas generated from the digester is allowed to flow through moisture traps. This process condenses out the Moisture present in the gas. The gas is then allowed to counter flow in a specially designed Sulfide extractor. This filter drains out Balance Moisture along with the present sulfides. Treated gas is pressurized with the help of a primary compressor but if the gas is already pressurized, it is not required. The available pressure in large biogas plants might already be enough and a compressor might not be necessary. The filters mounted drain out any leftover moisture and Oil present post compression. The pressurized clean gas is then passed through a Physical Separation Device. The Physical Separation Device is a specially designed modern high pressure combined directional flow device for cleaning Biogas of its impurities like H2S,CO2 etc (Source: SETM, 2011). The following diagram shows the general process of biogas electrification;

Figure 2: A diagram showing the biogas electrification process

https://energypedia.info/wiki/File:Biogas_plant_used_for_power_generation.png�



FIN

AL

REP

OR

T

3.4 Various technological options for Biogas power generation In the world market there is availability of biogas generators with different types and series, types of engine, capacity and technical parameters. Biogas generators are widely utilized in the world, both in developed and developing countries. The most challenging is the first stage of the generator selection: the combustion engine using the biogas as fuel. In assumption, biogas can be used as fuel in nearly all types of combustion engines, such as gas engines (Otto motor), diesel engines, gas turbines etc. There are different types of biogas generator sets available in the market (mostly in China) from 1 kW to 1000 kW range. These generators can be run purely from the gas produced from the biogas digester with necessary modifications. In the majority commercially run biogas power plants today, internal combustion motors have become the standard technology. The following types of engines are, in principle, well-suited for operating on biogas:

• Four-stroke diesel engines • Four-stroke spark-ignition engines • Converting diesel engines • Converting spark-ignition engines • Co-generation unit (electricity and heat utilization) • Turbines

In the market of India and China there are several products of biogas generators already being practiced although those technological options are still new for Nepal. Also biogas- diesel dual mode engine does not require significant additional investment. A locally prepared arrangement for moisture traps and sulphide extractor is sufficient for this technology.

Box 2: Gas Turbine used for large scale biogas electrification project Combustion turbines, or gas turbines, have been used for power generation for decades and are often the technology of choice for new electric generation due to their low capital cost, low maintenance, and low emissions. The gas turbine is an internal combustion engine that operates with rotational rather than reciprocating motion. Turbines can be fueled by natural gas or biogas and are used in a broad scope of applications, including electric power generation, gas pipeline compressors, and various industrial applications requiring shaft power. While many newer turbines are large utility units, manufacturers are producing smaller and more efficient units that are well-suited to distributed generation applications. Turbines range in size from 30 kW (micro turbines) to 250 MW (large industrial units). Jenbacher is the world leader company for biogas turbines included in the annex.



FIN

AL

REP

OR

T

Figure 3: Schematic Diagram for Conversion of Biogas Engine from Diesel Engine

Source: BiGFIN, 2010

In biogas which contains methane as the fuel element, the self ignition temperature is relatively high and much higher compression ratios can be used, which leads to improved efficiency. The alteration of a diesel engine into an equivalent spark ignition engine requires the following modifications/ retrofitting;

• Remove the fuel injection system (fuel pump and the injector) • Incorporation of a suitable spark plug in place of the injector by appropriate alteration in

the injector hole. • Modification in the engine intake system incorporating appropriate system for air-fuel

mixing and control i.e. a gas carburetor system. • Retrofitting with cam shaft/ crank shaft a particularly designed ignition system. • Modification in the combustion chamber/ compression ratio etc.

3.4.1 Electricity Generation Components Biogas engine with alternator An engine-generator is the combination of an electrical generator and an engine (prime mover) mounted together to form a single piece of self-contained equipment. The engines used are usually piston engines, but gas turbines can also be used. And there are even hybrid diesel-gas units, called dual-fuel units. The Alternator is high efficient, self-excited, self-regulated and suitable for uninterrupted operation. They also provide the electrical control panel with all type of indication, automatic changeover and monitoring/controlling as optional. Many different versions of engine-generators are available in the market ranging from very small portable sets to large sizes of capacity ranges from 2kW to 2000kW. The primary advantage of engine-generators is the ability to independently supply electricity, allowing the units to serve as backup power solutions. Some specification of the biogas generators suitable for this study is presented below:



FIN

AL

REP

OR

T

Table 3: Specifications of the biogas generators Model (KW) 8 15 20 26 35 45

Rated power(KW/KVA) 8/10 15/18.75 20/25 26/32.2 35/43.8 45/56.3

Rated Speed(r/min) 1500 1500 1500 1500 1500 1500

Rated Voltage(V) 400 400 400 400 400 400

Rated Current(A) 14 27 36 47 63 81

Rated Frequency(HZ) 50 50 50 50 50 50

Rated Power Factor 0.8 0.8 0.8 0.8 0.8 0.8

Supply Connection 3 phases 4 lines 3 phases 4 lines

Excitation Way Brushless Brushless

Starting Mode 24 VDC Electric starting system 24 VDC Electric starting system

Cooling Water Cooling system Water Cooling system

Speed Control Electronic governor Electronic governor

Gas Consumption(m3/kW/h) Less than 0.70 Less than 0.70

Dimension

Length 1450 2000 2100 2328 2220 2350

Width 620 670 730 730 730 900

Height 1250 1300 1320 1320 1390 1310

Net Weight 420 600 620 710 810 2120

Biogas Gas requirements

1- Biogas no less more than 65% Methane(CH4) 2- Gas pressure: Enough Biogas should be processed by desulfuring and dehydration before entering into the generator sets.(Otherwise, it will damage the engine cylinder, spark plug and other parts.) The warranty will not cover damaged cause wrong operation.



FIN

AL

REP

OR

T

Biogas generator Electricity generation process (Source: SETM, 2011)

The following instruments are required for biogas electricity generation. These instruments are:

A. Digital temperature indicator for water/ oil /exhaust gas B. Digital RPM indicator C. Power meter and monitor D. Energy meter • It provides prompt, convenient feedback on electrical or other energy

use. Devices may also display cost of energy used, and estimates of greenhouse gas emissions.

E. Analog ammeter and voltmeter • A voltmeter is an instrument used for measuring electrical potential difference between

two points in an electric circuit. • An ammeter is a measuring device used to measure the electric current in a circuit. • A voltmeter is connected in parallel with a device to measure its voltage, while an

ammeter is connected in series with a device to measure its current. • At the heart of most analog meters is a galvanometer, an instrument that measures

current flow using the movement, or deflection, of a needle. The needle deflection is produced by a magnetic force acting on a current-carrying wire.

Voltmeter Ammeter

F. Self start without battery G. Control panel for mounting of instrument • An electric switchboard is a device that directs electricity from one or more

sources of supply to several smaller regions of usage. It is an assembly of one or more panels, each of which contains switches that allow electricity to be redirected.

Energy Meter

Control Panel

https://www.boundless.com/physics/definition/circuit/�

https://www.boundless.com/physics/definition/current/�

https://www.boundless.com/physics/definition/parallel/�

https://www.boundless.com/physics/definition/series/�

https://www.boundless.com/physics/definition/force/�

http://en.wikipedia.org/wiki/Electricity�

http://en.wikipedia.org/wiki/Switch�



FIN

AL

REP

OR

T

Especially design engine to use biogas and producer gas, water cooled/air cooled, spark ignition, 1500 RPM, continuous rating, heavy duty and most important operation without battery for remote place. A specially designed of automatic air and fuel control and system to take care of efficient, smooth working of engine with variable load is essential.

3.5 Biogas Purification and other spare parts Biogas purification can be anticipated to enrich the methane content in the biogas. The use of pressurized water scrubber, which might be appropriate from both technical and economic point of view in Nepal at commercial scale. Moreover, other several processes like pressure swing absorber, membrane separation, activated carbon sieve method, cryogenic etc are available in the market. Pressure Swing Adsorption (PSA) Pressure Swing Adsorption (PSA) is a technique which consists of four adsorber vessels, a compressor and an H2S removal step. The four adsorber vessels contain adsorbent material (carbon molecular sieve) which adsorbs N2, O2, H2O, CO2 and H2S. The H2S is adsorbed irreversible by the adsorbent material and would thus poison the material. Therefore, an additional H2S removal step to be included.

Membrane separation Membrane separation processes operate without heating and therefore use less energy than conventional thermal separation processes such as distillation, sublimation or crystallization. The separation process is purely physical.

Cryogenic Cryogenic processing is not a substitute for heat treatment, but rather an extension of the heating - quenching - tempering cycle. Normally, when an item is quenched, the final temperature is ambient. The only reason for this is that most heat treaters do not have cooling equipment. This technique seems more difficult and expensive too. Among the various purification processes, the water scrubber technology seems more appropriate.

3.5.1 Water scrubber technology Two types of water absorption processes are commonly used for upgrading of gas from anaerobic digestion, single pass absorption and regenerative absorption. Water can also be recycled and a stripper column has to be integrated in the regenerative absorption process whereas the water in the single pass process is used only once. These appliances also can be made available in the market of Nepal via supply chain market of both China and India.

http://en.wikipedia.org/wiki/Distillation�

http://en.wikipedia.org/wiki/Sublimation_(phase_transition)�

http://en.wikipedia.org/wiki/Crystallization�



FIN

AL

REP

OR

T

Source: Greenlane, 2010

Figure 4: Water Scrubbing Flow Diagram

3.5.2 Compression and Storage A common gas compressor posses fire hazards, since auto-ignition temperature of biogas is 537°C. So leakage and extreme temperature rise will be lethal. A hermetic reciprocating compressor can be used in a refrigeration system with a hydrocarbon refrigerant. It requires cooling system, otherwise careful operation must be done so as not to raise the temperature above safe limits. The pressure and volume of the gas at various points of compression can be distinguished using a pressure gauge and flow-meter respectively. The consequence of pressure is two-fold; it can alter the composition as well as the total output of biogas. CO2 is soluble in water willingly while methane is not. At high pressure, the solubility of CO2 increases proportionally much more than that of methane, with the upshot that the gas will contain a higher percentage of methane. A separate tank can be used with a floating gas holder for the storage of the digestate and also storage of the raw biogas. Floating gas holders can be made of steel, fiberglass, or flexible fabric materials. The market analysis shows that, the vehicle tubes, plastic bags etc as gas storage could be used.

3.5.3 CO2 Scrubbing Unit Biogas consists of different gases like Methane, carbon dioxide, and some other trace gases like hydrogen sulfide, hydrogen, nitrogen, water vapor and others. From those gases, only methane is required for cooking and lighting purposes but the others are harmful for the equipments which the biogas burnt in, transported through and decrease the calorific value of the biogas. So that, unwanted gases should be removed. The purpose of CO2 scrubbing unit is to remove the unwanted CO2 from raw biogas dissolving with water.

Photo 2: Compression System Setup (Source: TUTA/IOE/PCU)



FIN

AL

REP

OR

T

Biogas outlet

Water inlet

Biogas inlet

Water outlet

CO2

Scrubbing unit

Figure 5: CO2 scrubber unit

3.6 Identification of appropriate biogas electrification generator for Nepal Biogas generators can be easily brought to Nepal from markets of India and China. Most of generators originate from China while few generators are from India as well. According to result of the market analysis, at present the number of biogas generators used in Nepal is almost nil in comparison with quantity of biogas plants already installed. Study team suggested that; Biogas generator must select based on two main factors: capacity and electricity consumption demand. According to factual survey, generators are to be selected by market availability. Market survey shows that, even though biogas generators are available sold in the market but the information and technical parameters are not sufficiently provided by the suppliers. Study team has made several contacts with various suppliers for their product details along with technical specifications. Normally, the suppliers only provide quotation. The information in the quotation is very simple which mentions about power and price of generator. Other information such as fuel consumption, lifetime, catalogue etc was lacking. There is a lack of neither manual nor instruction brochure to direct users/buyers to select suitable generator, installation, operation as well as maintenance. There are various options for selecting biogas generators. After establishing the supply chain system

3.7 Inventory of biogas electrification components manufacturers/suppliers

in the market (biogas sector); a buyer can choose product as their best choice.

Study team has contacted to several manufacturer companies and suppliers as far as possible. The following numbers of companies were contacted while conducting the internet based search/survey.

4.1 cm

45.0cm

24.0 cm

4.0 cm

7.6 cm

2.1 cm

4.9 cm

36.2 cm

2.1 cm

1.4 cm

6.0 cm

Biogas Outlet

Water Inlet

Biogas Scrubber

Water Outlet

Biogas Inlet



FIN

AL

REP

OR

T

Table 4: Number of companies contacted during study period Biogas Generators China India Bangladesh Germany

Manufacturing companies 4 10 Supplier companies 36 5 3 1

Based on email and phone calls received from the various suppliers from China and India; some suppliers have shown their high interest to supply biogas generators in Nepal. For example, Saicharan Urja India Pvt Ltd, India has given high inquisitiveness to supply biogas generator, biogas flow meter, pressure gauge for gas metering system, and biogas desulphurizer units in Nepal. The various e-mail received and its passion to perform this task is relatively high than other suppliers. Another potential suppliers are Green Power Solutions, Perfect Bio-waste and Power Management P. Ltd and Green Power International Pvt. Ltd, India.

In the case of China, Alibaba Group has several suppliers in China and other countries as well. It is famous for biogas generator products and other accessories. Among the supplier companies; these three companies namely Zhengzhou Yudong New Energy Co.Ltd, Weifang Heng An Imp and Exp Co.Ltd of China are the most interested suppliers of biogas generators. Similarly, for supply of the biogas desulphurizer, one of the potential suppliers is Wuhan Acme Agro-Tech Co., Ltd, China. Another capable supplier for supply biogas desulfurizer is Shenzhen Puxin Technology Co.Ltd, China.

As reply in the e-mail and phone calls, the biogas generator manufacturer companies (multinational companies/large companies) said that, if Nepal requires biogas generator sets above 50/60 pieces per year, they are ready for opening biogas generator suppliers company in Nepal.

The various appliances is required for biogas electrification. This market study aimed to identify the major suppliers of the following appliances in Nepal and abroad as well.

1) Engine-generator sets: Biogas generators sets suppliers (registered) in Nepal are not available but in China and India there were found too many suppliers. A list of suppliers in China, India and Bangladesh has been prepared in Annex-1.

2) Flow meter: Few suppliers are already working in Nepal. Apart from Nepal; there are many suppliers in China and India as well. The list of supplier is given in Annex-2.

3) Pressure meter: A list of suppliers is attached in Annex-3.

4) Desulfurizer units: A list of supplier from China and India is prepared in Annex- 4.

5) Monitoring and Control Panels: With reference to this market survey, it can be said that electrical control panels are easily available (local retailers/shops have easy access) in the major cities (Kathmandu, Pokhara, Dhangadi, Nepalgunj, Biratnagar etc) of Nepal. A list of suppliers is attached in Annex-5.

An inventory of biogas electrification appliances manufacturers/suppliers has been prepared. Almost biogas electrification appliances have 1 year warranty.



FIN

AL

REP

OR

T

4 Supply Chain Mechanism, Cost for Biogas Generators, Possible Suppliers in Nepal

4.1 Supply Chain Mechanism The supply chain system for biogas generators in Nepal is not established. However, study team has visited several electrical shops in Kathmandu to identify the marketing channel of other generators sets such as petrol engine, diesel engine etc. Among the dealers; few were ready to sell biogas generator sets in the market, if there is high demand (large number). The retailers of general generator sets were found unknown about biogas electrification. As they said; there is good availability of technical persons for repair and maintenance of any electrical equipments in the local market. The flow meter, pressure meter, desulfurizer unit etc are already being sold in the market as per demand for various purposes.

A query related to demand and supply chain; local dealers stated that they must first submit the Letter of Intent as per their local demand then receives quotation. Based on demand and quotation; local dealers are sending budget to their respective companies in China, India or others. Nepalese local dealer is responsible to pay tax, customs and duties while buying generator sets and other required appliances. In similar way, suppliers from China, India or other countries provide warranty/guarantee of such systems. If there is major damage then that supplier gives replace of that system. As informed; some manufacturers/suppliers (multinational companies) have their local dealers in Kathmandu and also providing technical supports to other local dealers time to time. Local retailers are responsible for selling of generator sets which bought from dealers at local market. In the case of normal generator set supply chain; there is already established national dealers (like Honda, Yamaha etc) one side whereas other side local dealers are importing those sets from international suppliers as well. Consumer can bought normal generator sets in different options like, national dealers, local dealers and local retailer/shops. A flow chart of supply chain mechanism for normal generator sets (like diesel and petrol based) is given below.

Figure 6: A Model of Generator Supply Chain Mechanism in Nepal



FIN

AL

REP

OR

T

The spare parts of normal generator sets are available in the market. Furthermore, the repair and maintenance facilities after sales services also available in local market. In similar way, biogas electrification related workshop/dealers could be established in Nepal. Implementation is first then it create ultimately repair and maintenance centers in the market. The HS CODE (Harmonized Commodity Description and Coding System) of tariff nomenclature is an internationally standardized system of names and numbers for classifying traded products developed and maintained by the World Customs Organization (WCO) (formerly the Customs Cooperation Council), an independent intergovernmental organization with over 170 member countries based in Brussels, Belgium. This market study was also focused to identify the HS Code of each biogas generator set but only few suppliers provided their such codes. Federation of Nepalese Chambers of Commerce and Industry (FNCCI) is responsible to regulate HS code of all exporting goods. It is mainly focused on agro-products and herb products. The Integrated Customs Tariff was created to facilitate use of the Harmonized System and it is simply a guideline and does not constitute any legal requirement. Users are advised to consult the legal text for accuracy and legal judgment. Detail process is attached in Annex part. (Source: www.customs.gov.np) As per demand; it is possible to bought biogas generator sets in Nepal either from India, China or third country. The demand creation in large number will help ultimately to establish market chain of manufacturer to consumers. By creating more demand in the sector; a supply chain mechanism of biogas generator and associated systems could be established. The following is the general provision of Tax and custom duties in Nepal.

Source: Arthik Adhyadesh, 2070

In addition to the direct subsidy on the biogas system, Nepal government has granted some other financial incentives for biogas development and promotion whole over the country. The value added tax (VAT) is exempted on imported biogas appliances. Similarly, there is provision of only 1 percent import duty and 1.5 percent local development tax in the import of biogas appliances. Such kind provision should be developed for biogas generator sets as well.

Box 3: Tax and custom duties for supplying generators in Nepal For 10 kW or more than 10 kW generator : import duty is only 1% .

Machines that runs from alternative energy such as wind turbine , biogas ,and its parts: only 1% import duty.

Generator company that are assigned in VAT, that export their generating parts : 1% charge in import duty .

Biogas and equipment’s used in biogas parts: only 1% import duty charge. Machines or equipments that runs from biofuels ,and their parts: only 1% import duty charge. For generator capacity less than 10 kW the import duty charge is 15%.

Box 4: An example of cost price of a generator set According to study in the market, price for diesel generator set of 5 KVA is NRs 7,00,000(factory price) in which user /customer should pay for VAT 13% and tax 15%. Total cost of diesel generator for 5 KVA including TAX and VAT is 8, 96,000 (at users’ level). The transportation cost highly depends upon the quantity of imported products, location, time etc. In case of high number of demand, international suppliers are fully responsible for transportation cost and other service delivery as well.

http://www.customs.gov.np/�



FIN

AL

REP

OR

T

4.2 Cost Price of Biogas Generator Sets Depending on origin and technical characteristics of each generator, price is different and decided by manufacturers/suppliers. A supplier provided different quotation of same capacity generator. It is impossible to say a specific price of generator. For example; cost price of 1kW capacity biogas generator set in China ranges from 98-1500 dollars but in India its cost 1900 dollar. Similarly, cost price of 3kW capacity biogas generator set in China ranges from 150 -1500 dollars but in India its cost 2500 dollar. This figures indicate that there are several products in the market of China and India with different price of generator sets having different capacities. After establishing demand supply system; a buyer can bought the biogas generator sets as suited for own purpose.

Figure 7: An example of price variation of same capacity biogas generator sets

A list of price of biogas generator sets as per their quotation (factory price) provided by the suppliers from China and India is given below.

Table 5: Cost price of biogas generator sets Name of the Suppliers Capacity kW Cost / Price in Dollar Chongqing Jiachi Machinery Manufacturing Co., Ltd. 1 $ 98-265 Model Number: BG350 1 $5,105 Shandong China Coal Industrial Equipment Corp. Ltd 1.2 $1,500 Shanghai Z&S International Trading Co., Ltd 2 $40 – 240 Chongqing Honpan Machinery Co., Ltd 3 $105-195 Shenzhen Puxin Technology Co., Ltd. 3 $1,000 Wuhan Acme Agro-Tech Co., Ltd. 3 $ 500 – 1,000 Wuhan Acme Agro-Tech Co.Ltd. 3 $400 – 800 Shanghai Better Industry Co., Ltd. 3.5 $1500-5000 Shanghai Better Industry Co.Ltd 3.5 $1500-5000 Fuan Sheng Ke Electrical Machinery Co., Ltd 5 $100 – 390 KAMA International Trade & Technology Co., Ltd 5 $70-21000 Shandong Shenghan Power Co., Ltd 5 $1000-8000



FIN

AL

REP

OR

T

Weifang Haitai Power Machinery Co., Ltd 5 $4,600 Wuhan Acme Agro-Tech Co., Ltd. 5 $700 Wuhan Acme Agro-Tech Co.Ltd 5 $700-900 Shenzhen Powertec Generator System Co., Ltd 7 $2000-10000 Zhengzhou Yudong New Energy Co., Ltd 8 $1,000-3,000 Fuan Delixi Electric Machinery Co., Ltd. 10 $2,500 Shenzhen Genor Power Equipment Co., Ltd 10 $8959-9585 Shenzhen Sunrise Econergy Co., Ltd 10 $5,000 Weifang Guanghui Agricultural Machinery Co., Ltd 10 $4500-6500 Weifang Guanghui Agricultural Machinery Co., Ltd 10 $4,500 – 7,000 Weifang Heng An Imp& Exp Co., Ltd 10 $5680-6400 Weifang Hualing Power Co., Ltd 10 $5,200 Weifang Hualing Power Co.Ltd 10 $3,000-20,000 Weifang Naipute Gas Genset Co., Ltd. 10 $10,000 Weifang Yidaneng Power Co.Ltd 10 $4500-25000 Weifang Yidaneng Power Co.Ltd. 10 $5000-7000

Wuhan Acme Agro-Tech Co.Ltd. 10 $6,000

Zhengzhou Yodong New Energy 10 $525 Weifang Yidaneng Power Co.Ltd. 12 $2,000 Weifang Guanghai Machinery co.ltd 14 1000 Weifang Haitai Power Machinery Co., Ltd 14 $5,105 Miracle Power system inc. 15 $3,500 Shandong Shenghan Power Co., 15 $3000-60000 Weifang Hualing Power Co.Ltd 15 $3,000-20,000 Weifang Naipute Gas Genset Co., Ltd. 15 $2,000 Weifang Yidaneng powers Co.Ltd 15 $4,500 Weifang Yidaneng Power Co.Ltd. 18 $ 98-265 Weifang Yidaneng Power Co.Ltd. 18 $4,500

Anhui Fenghuo Renewable Energy Co., Ltd. 20 Camda New Energy Equipment Co., Ltd 20 $11,700

Camda New Energy Equipment Co., Ltd 20 $10500-14500

Camda New Energy Equipment Co., Ltd. 20 10000

Chongqing Fengdong Import & Export Co., Ltd 20 $80-50000

Dongying Shengdong Dynamoelectric Facility Co., Ltd 20 $3000-5000

Fujian Saint Meilan Motor Wiring Co., Ltd. 20 $1,999-5,999

Shandong Lvhuan Power Equipment Co., Ltd. 20 $1,000

Shandong Shenghan Power Co. 20 $6,200

Shandong Shenghan Power Co., Ltd. 20 $3,000

Shenzhen Genor Power Equipment Co., Ltd 20 $13,259



FIN

AL

REP

OR

T

Taizhou Taifa, New Energy Science Co. Ltd 20 $10,000

Weifang Hualing Power Co., Ltd 20 $5,000

Weifang Hualing Power Co., Ltd. 20 $1000-6000

Weifang Hualing Power Co.Ltd 20 $1,000 Xiamen GTL Power System Co., Ltd 20 $6,000 Zhengzhou Yudong New Energy Co., Ltd 20 $4560-19999 Zhengzhou Yudong New Energy Co., Ltd 20 $3,000-8,000 Patvin Auto Products Pvt. Ltd 1-3 $1900-2500 ( Note: The price is as per actual provided in their quotation not including Tax/VAT; moreover if large demand created then some companies as mentioned above are ready to deliver their products in Kathmandu including some taxes and VAT as per rule of Nepal. Most of the manufacture companies/suppliers from India were reluctant to provide cost details without actual demand.)

4.3 Factors affecting for biogas electrification Biogas electrification projects has not only benefit of power generation but its environmental value is also high due to waste management in large commercial farms, municipal waste etc. Economically, biogas electrification project must compete with electricity generation from national grid or petrol, diesel based electrification. With reference to the deficit in demand and supply of grid electricity at the present time and the market price of diesel and petrol; biogas electrification projects might be more viable options to fulfill energy demand in commercial farms in Nepal.

The following are major supporting factors for implementation of biogas electrification projects in the context of Nepal:

Rising prices of petroleum products (diesel and petrol)

Figure 8: End Use applications of large biogas system



FIN

AL

REP

OR

T

Low reliability of electricity provision from national grids with long duration of power cuts (Up to 12-14 hours load shedding per day).

Waste management and sanitation provisions are highly prioritized. However the following inhibiting factors are:

Need to buy high quality components from abroad countries (from China, India or other countries); market is not established yet.

Unfavorable conditions/policy for selling electricity till date Lack of awareness, capacity and experience preventing the economic operation of

infrastructure components. The economic feasibility of a biogas plant depends on the economic value of the entire range of plant outputs. The following factors are to be taken into consideration;

Electricity generation Biogas as cooking energy Heat, co-generated by the combustion engine Waste management condition (sanitation and health hygiene) Slurry used as fertilizer

The following figure provide basic idea about the commercial market approach (Investment Vs Returns) for large biogas sector.

Figure 9: Commercial market approach for biogas electrification



FIN

AL

REP

OR

T

4.4 Freight Forwarders for Biogas Electrification It is assumed that the role of freight forwarders to establish linkage between different stakeholders in the market is very crucial. Biogas generator supply chain is not established yet, thus study team has worked to identify the potential freight forwarders in Nepal. Apart from few personnel working to the sector, others were not familiar with the technology. 4.5 Potential Suppliers for Biogas Generator Sets A field visit was conducted in Kathmandu to identify the potential suppliers of biogas generator sets and other accessories in future. The following companies were committed to bring biogas generator sets in Nepal for their commercial purpose; if there is commitment of demand in large number and marketing of those products by authorized agency.

1. Macto Sphere Concern, Teku Kathmandu 2. Onyx International Pvt. Ltd, Baneshwor 3. Eis Marketing Pvt. Ltd, Baneshwor 4. Pragati Trading Concern, Kathmandu 5. B.K Overseas Concern, Putalisadak Kathmandu 6. Engineering Marketing Concern, Tripureshwor 7. Generator Bazar Pvt. Ltd, Kathmandu 8. Infratech Pvt. Ltd, Thapathali 9. Shubham Engineering service, Kalanki 10. Associated Enterprises, New road

[Note: As studied in the market of Kathmandu for supply of biogas generator set, the following suppliers are committed to supply of biogas generator set if biogas generator set requirement is greater than 50 pieces.]



FIN

AL

REP

OR

T

5 Testing/Commissioning Procedures 5.1 General criterias for testing/commissioning A number of biogas electrification projects of different capacities and applications should be taken up for refining the technical know-how, developing technical experts/technicians and necessary infrastructure, establishing a proper arrangement of operation & maintenance and large scale dissemination. The implementing organizations must make sure that sufficient feed materials for proposed biogas plants size are available on sustainable basis and the beneficiary organization gives an undertaking that the plant would be maintained and operated for a minimum period of ten years. Based on provided information, an authorized agency will be responsible for testing and commissioning of thus established project. Testing and commissioning could be initiated after developing the required specifications and standards, discussions/deliberations on the performance of systems, setting up operation and maintenance mechanism, training of required human resources, capacity building, business meets for the prospective industries, etc. with the ultimate objective of promotion of biogas electrification. The general format of testing and commissioning for biogas electrification project is prepared as follow:

Table 6: Testing and commissioning format for biogas electrification project

1. Salient Features of the Project Name of plant: Name of Owner: Location: Size of Biogas Plant: Supplier/Installer: Ownership: Private/community Total waste production (kg): Beneficiary type : Electrification Status: System type: Rated Output kW: Voltage: Maximum Current: Gas Cleaning system: Start of Construction of project: ______D/M/Y Commissioning date: _____________D/M/Y 2. Technical Status of the Plant 2.1 Power house/Generator Shed Powerhouse size (internal): L : ______m X B: _______X H: ________m Construction: Roof and floor used Adequate working space for O/M: Cleanliness: Adequate lighting : Free of undue leakages: Waste safely disposed off: Earthing done properly: Remarks on Powerhouse – - - - - - - - Briefly discuss any major defects observed



FIN

AL

REP

OR

T

2.2 Generator Specification: Type:____________ Phase:_____ Voltage: _____V, Capacity: _____ kW/kVA, PF ___ RPM _____ rpm, Full load current: _______ Amp Frequency: ______Hz Insulation class: ______ Protection class: _____IP Manufacturer: ___________________Earthing done properly: Yes/No Remarks on Generator: - Briefly discuss any major defects observed

2.3 Control Panel and Switchgear Protection provided: Yes/No Over voltage / under voltage: ___ ___ Over frequency/ under frequency: ___ ___ Overload/Short circuited: ___ ___ Are the installed fuses / breakers are of adequate size: Yes/No Size of MCCB/MCB: _______Amps Rated breaking capacity of the breaker: _______ K Amp Type of Fuse installed: HRC/KIT-KAT Rating: _______Amps Emergency switch and feeder switch working properly: Yes/No Lightning arrestors installed at the power house: Yes/No

Measuring instruments incorporated in the Control panel to measure the following: 1. Main voltage and Ballast voltage Yes ( ) No ( ) 2. Load currents Yes ( ) No ( ) 3. Frequency Yes ( ) No ( ) 4. Power (kW) if provided Yes ( ) No ( ) 5. Energy (kWh) if provided Yes ( ) No ( ) 6. Indicator lamps Yes ( ) No ( ) 7. Time totalizer (operating hours) Yes ( ) No ( )

Remarks on Control Panel and switchgears – Briefly discuss any defects observed

2.4 Cable, connections and supply Type of power cable used in the power house: Copper/Aluminum Size of Cable _________mm2 Cable jointing and connections properly? Yes/No Type of Service cable used for hooking up: Concentric/ Twin flat/ others Size of Cable: _________mm2 Tapping connection done properly? Yes/No 2.5 Transmission/Distribution Lines Type of transmission/distribution Overhead/underground Length of the system: __________m Type of cable: ACSR/ABC/PVC Type of Pole: Mild Steel / Wood 2.6 Manuals and other related documents All the specified manuals are supplied (Acceptable) Few of the specified manuals are supplied (Not acceptable- Non Critical) None of the specified manuals are supplied (Not acceptable- Critical) Confirm supply of following manuals: (a) Operation, Maintenance and troubleshooting manual

Yes/No



FIN

AL

REP

OR

T

(b) Check list for fault detection and communication with manufacturer, checklist for normal operation (bearings, instruments, belts, coupling rubbers, noise vibrations) (c) Technical manual of as-built plant (d) Sample (master copy) of operation sheet for the operator (e.g. data, instrument readings, observations, reading interval, signature etc) (e) Sample (master copy) of maintenance sheet for the operator (lubrication intervals, check intervals, signature etc). Wiring diagram of power station with description of all fuses (type and size) (f) Address, phone number of suppliers and sub-suppliers for spare parts ordering and guarantee claims. (g) Wiring diagram of power station with description of all fuses and switches (type and size)

Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No

Remarks:

2.6 Spares parts and tools List the spare parts and tools supplied to the plant:

Spare parts Tools Description Remarks/Condition Description Remarks/Condition

Comment on supplied v/s quoted list of spare parts and tools: Recommend any additional spare or tool that is required for the site and equipment condition: Other remarks and observation:

Biogas Electrification Installation completion certification and remarks Installation of fully accepted with 1 year warranty _________________________ __________________________ ______________________ Signature of AEPC representative Signature of Entrepreneur Signature of Installer Name: Name: Name: Date: Date: Date:



FIN

AL

REP

OR

T

5.2 Certification/testing verification of appliances/equipments From this market study; it is identified that biogas generators also manufactured under ISO Standards however the testing the components of biogas are being considered to be established. The Renewable Energy Test Station (RETS) is an autonomous body governed by “Renewable Energy Test Station Rules 2063” framed under clause 31 of Nepal Academy of Science and Technology (NAST) Act 2048. It seems necessary to undertake the testing verification and certification of all appliances by RETS for the quality development and sustainable utility of biogas electrification products. An appropriate testing equipment to be identified to undertake quality testing of the various parameters. At least the “Product Introduction Test (PIT)” to be carried out to introduce biogas electrification system and its components for the first time in the market. Furthermore; AEPC/NRREP should initiate testing protocol for biogas electrification system.

5.3 Basic Requirements for the Sustainability of Biogas Electrification Project Operation of biogas plant should strictly follows instruction so as to ensure suitable dilution ratio of dung and water; gas pipe line must be gas-tight and no gas leakage. The biogas can effectively be utilized for electrification system after dewatering and cleaning of the gas. In addition, the slurry produced in the process provides valuable organic fertilizer for farming and sustaining the soil fertility. In this context, the frequent monitoring of the following components by technical team to be required.

Biogas Plants Gas Cleaning System Engine with alternator

• 100% biogas engines • Micro-turbines • Standard dual fuel engines preferably with diesel

Control Panel Machine Room / Shed Manure management system / protocol

Furthermore, these components are also to be monitored at the same time.

Digester, gas holder and accessories Feed / slurry handling system (composed pits) with water supply and storage Initial feed, Gas outlet Gas cleaning system

Any new efficient system for production of biogas, cleaning of the gas and conversion of the gas to electricity etc. can also be used subject to prior approval of the AEPC/NRREP. A summary profile of the intended project to be prepared including the following information.

Location for the project including GPS location Map and other information Name of the owner with detail contact information Business details: type of business, its nature in detail Daily/Monthly electricity consumption: Information about biogas plant (size, model, construction year, feeding materials etc) Preliminary efficiency of biogas generator



FIN

AL

REP

OR

T

Reasons for installing/purchasing biogas generator Estimate operation daily hours of generators Energy Savings Selection of biogas generator (model, size etc) Parameters (technical specifications in detail) Origin (location of manufacturer/suppliers) Suppliers/Local service providers etc

This type profile helps for regular monitoring of the project as per need. A periodic plan to monitor the all systems from authorized agencies should be developed which ultimately will help for the sustainability of the established projects.

5.4 Warranty/guarantee plan Based on market survey, it can be said that there is provision of warranty for at least one year of all biogas electrification appliances in most cases. Thus, the implementing agency should imply the provision of warranty is mandatory for installer or suppliers. Also the post installation services are to be required for sustaining the technology in future. At least 1-2 years of warranty/guarantee with repair and maintenance facilities should be encouraged for the successful implementation of biogas electrification projects in Nepal. Moreover, the following considerations are required;

Gas storage systems should be used to ensure enough gas and pressure for generator Do not change electric appliances currently being used after installation in the respective

business entity Concentration of hydrogen disulphide in access of 0.1 % is harmful to the engine. Hence

it is necessary to install gas cleaning system to remove hydrogen sulphide before the gas is taken to the engines.

Install a reverse circuit breaker Set up recording notebook to record daily data of operation Prepare the record of repair and maintenance as per need



FIN

AL

REP

OR

T

6 Conclusion and Recommendations 6.1 Conclusion Biogas generator has been rather widely used in the world. In international market, biogas generators are various type, kind of engine, capacity and technical characteristics. However, utilization of biogas generators in Nepal is still at its beginning. Quantity of generators that has already been installed into biogas systems is negligible in comparison to success of biogas installation in Nepal.

This study has focused to identify the possible biogas generators that are available in the market of China, India and Bangladesh. Moreover, a list of suppliers of biogas electrification appliances from China and India has been prepared.

6.2 Recommendations • The biogas electrification demonstration projects should be developed. To date, biogas

generator are not applied sufficiently in Nepal. Thus, a large number of biogas users, electric suppliers/dealers/retailers, private companies are not able to access information about the technology. Such established demonstration projects could play vital role to attract private sector in sector.

• It is possible to use hybrid generators like biogas/petroleum generator and/or biogas/diesel generator in order to make use of generators that already available in the market. The utilization of hybrid generator helps users to take initiative in electricity production as well as be active in case biogas plant has to stop due to any reason like maintenance or lack of feeding material (unavailability of biogas).

• Demand creation of biogas electrification projects in commercial approach is another challenge however it is equally important for attracting the market in this sector. AEPC should provide facilitating role through creating the investment friendly environment to attract the private sector for their business purpose.

• AEPC should made policy recommendation to the government for TAX/VAT exemption of biogas generators and their accessories which ultimately lower the cost of technology. Such type provision would help for the promotion and implementation of biogas electrification projects in the country.

• Quality of the whole system including their certification, guarantee, regular follow up monitoring, after sales services etc should be strictly followed by all concerned agencies before, during and after implementation of the projects.



FIN

AL

REP

OR

T

References Bajracharaya, Tri Ratna; “Purification and Compression of Biogas: A research Experience”, TUTA/IOE/PCU

Biogas Forum India, Newsletter, June 2010

Govinda P. Devkota, January 2009 “Development of Modality for Promotion of Institutional or Community Biogas Plants in Nepal”

Ministry of Finance; Nepal Government “Arthik Adhyadesh 2070”

SETM, 2012 “Baseline for Domestic and Larger Size Biogas Programmes, SNV Nepal”

SETM, 2012 “Market Analysis of the Biogas for Business Program, SNV Nepal”

SETM, 2011 “Detailed Feasibility Study of Biogas Power Generation from Poultry Waste in the Poultry Farms, AEPC”

www.aepc.gov.np

www.alibaba.com

www.energypedi.info

http://www.aepc.gov.np/�

http://www.alibaba.com/�

http://www.energypedi.info/�



FIN

AL

REP

OR

T

Annexes

Annex 1: List of Generator Set Manufactures/Suppliers

Biogas Generator Suppliers in China

S.N Name of the Suppliers Capacity Generator Specification Photograph Cost / Price Contact Details Remarks

1.

Weifang Guanghai

Agricultural Machinery Co.

Ltd

60 kW

Gas consumption: 0.6m^3/kWh Speed: 1500/1800 rpm Model no:YDNGFZ-60 Rated power: 60 kW

Rated voltage: 400/230v Rated current: 108A Frequency: 50/60 Hz Water cooling method

3-ph, 4 wire Excitation type: Brushless

$ 4500/set

Country: China State: Shandong

Web: ww.yidaneng.com Email:[email protected] FAX:0086-0536-8224655

Mobile:13375366086

Four hour tested Environmental

protection Easy control

and maintenance

2.

Dongying Shengdong

Dynamoelectric Facility Co.Ltd

30 kW

Model no: SD-30 Rated power: 30 kW

Warranty: 1 yr or 1000 hrs Fuel consumption: 0.4Nm^3/kWh

Ac 3-ph output Rating(kva): 37.5 Efficiency: 86.1%

Total service life: 15-20 yrs type: In line, 4 stroke

Electric control ignition

$ 3000/set


Web: www.dysd.net E-mail： [email protected]

Fax： 0546-5056787 Tel： 0546-5056186

Cooling way: water cooled

3.

Taizhou Taifa, New

Energy Science Co. Ltd

20 kW

Model no: TFS20 Rated power: 20/25 kW Electric starting system

4 Cylinders Gas consumption: 1.63m^3/kWh

3 phase 4 wire system Warranty: 1 yrs or1000 hrs

Net wt.: 700 kg Electric governing method Rated speed: 1500 rpm

Cooling system: Water-cooled

$ 10000/set

Country: China State: Jiangsu

Web: www.fdjtf.com Tel: 13515155003

Email:[email protected]

CE ISO approved

Good quality Environment

friendly

mailto:[email protected]�



FIN

AL

REP

OR

T

4. Weifang

Yidaneng powers Co.Ltd

15 kW

Model no: YDNGFZ10~YDNGFZ500 Frequency: 50/60 hz

Cylinder: Multi cylinder in one line Automatic alarm system

Rated power: 10 kW-500kW Warranty: 1 yrs or 1500 hrs

Gas consumption: 0.36 m^/kWh Voltage regulation: less than 1

Cooling type: open cooling 3-ph 4 wire

Net wt.: 470-12000kg 4 stroke

$ 4500/set

Country: china State: Shandong

Web: www.yidaneng.com FAX:0086-0536-8224655

Mobile:13375366086 E-mail:[email protected]

5.

Weifang Naipute

Gas Genset Co., Ltd.

15 kW

Model no: 15GFT Cylinder no: 4 Net wt: 500 kg 3-ph ac output

Speed: 1500/1800 rpm Rated power: 15 kW

Efficiency: 84.3% Rating kVA: 22.5

Shaft: Single bearing Operation language: English

$ 2000/set


web: www.en.wfnpt.com TEL：86-0536-8910261 FAX：86-0536-8910259 Email:[email protected]

Long life time: 15-20 years

6. Miracle Power

system inc.

15 kW

Model no: MT21B Warranty: 2000 hrs/1 yrs

Rated power: 10 kW speed: 1500/1800 rpm

Engine: Toyota 4 Y 3-ph ac output

Rated current: 27.2 A Fuel: Biogas

Gas consumption: 0.64 m^3/kWh

$ 3500/set

Country: China State: Sichaun

www.miraclepower.cn Fax: +86-769-83521488

Mail:[email protected] Tel: 86-28-84921381

Environment friendly Original

manufacturer

7.

Chongqing Jiachi

Machinery Manufacturing

Co., Ltd.

Small power(1

kW)

Model no: JC1200 o/p: single phase ac

Speed: 3600 rpm Rated voltage: 120/230 Rated power: 1.0 kW Rated current: 3.2 A Frequency:50/60 Hz

$ 98-265/ unit

Country: China State: Chongqing

www.cqjc_machinery.com Fax:0086-23-65660766 Tel:0086-23-65660766

Contact person: Mr. Leonard Yang

Soundproof and portable low fuel

consumption High quality,

durable


http://www.miraclepower.cn/�

http://www.cqjc_machinery.com/�



FIN

AL

REP

OR

T

8. Wuhan

Acme Agro-Tech Co., Ltd.

5 kW

Model no: AM190FG output: Ac or Dc

High security label Speed: 1500 rpm

Rated voltage: 230v/120 v low biogas pressure

$ 700/set

State: Guangdong Country: China

www.puxintech.com Fax:86-27-83315893 Tel:86-13277936540

Contact person: Mr. Siyo Tang

Easy to operate Easy to start

9.

Weifang Naipute Gas

Genset Co. Ltd.

10 kW

Model :10GFT Exciting method: AVR Brushless

Rated power: 10 kW Rated voltage: 400/230v

Max gas consumption: 3.5m^3/kWh Starting mode: Electrical

Cylinder no:3 Rated current: 18A

Rated speed:1500/1800 rpm Speed regulation mode: Electrical

Voltage fluctuation rate: less than 3s

$10,000/set


web: www.en.wfnpt.com FAX：86-0536-8910259 TEL：86-0536-8910261 Mail:[email protected]

10.

Shandong China Coal Industrial

Equipment Corp. Ltd

1.2 kW

Gas consumption: 0.55 to 0.65m³/kWh Power supply: 230V/50Hz Running power: 1,200W

Peak power: 1,300W temperature requirement: -5 to 40°C

General altitude: 2,000m Packing: 620 x 460 x 470mm/set,

HS code: 85022000

$ 1500/set


www.chinacoalintl.com Mail:[email protected]

Tel:+86-537-2351381

11.

Shenzhen Puxin

Technology Co., Ltd.

3 kW

Gas consumption: 0.55~0.65m3/kWh 230V 50 Hz

Running Power 3000W Peak Power 3500W

Temp, Requirement: -5°C~40°C General altitude: 2000m

710*710*600mm/set 93kg/set HS CODE: 85022000

$ 1,000/set

Country: China State: Shenzhen

puxinbiogas.en.alibaba.com Fax:86-755-89323983

Mbl:13425127057 Contact person: Mr. Vane Yen

Excellent safety feature low cost

http://www.puxintech.com/�



FIN

AL

REP

OR

T

12. Wuhan Acme

Agro-Tech Co., Ltd

3kW

Output Type: AC Single Phase Speed: 1500R/M

Frequency: 50HZ/60HZ Gas consumption: 0.55~0.65m3/kWh

HS CODE: 85022000 Warranty: 1 year

Rated Current: 12V 8.3A Temperature Requirement: -5°C~40°C

Rated Power: 3KW Peak Power: 3500W

$ 500 - 1,000 / Set

State: Hubei http://www.acmesgro.org

Country: china Fax:86-27-83315893 Tel:86-13277936540


clean, good quality,

High return Small size

biogas generator

13. Wuhan Acme

Agro-Tech Co.Ltd.

10 kW

Model Number: AM-485Q Gas consumption: 0.55 CBM per kWh

Power arrange: 10kW-500kW Rated Power: 10KW

Rated Voltage: 400/230V Speed: 1500r/min

Output Type: AC Three Phase Number of Cylinder:4

Type of Cooling: Closed Water Net Weight:700kg

1 yrs or 1500 hrs warranty

$ 6,000 / Set

Country: china State: Hubei

http://www.acmesgro.org Fax:86-27-83315893 Tel:86-13277936540


High cost effective

Stable and durable

14.

Guangxi Yulin Excellent Power

Generator Equipment Co.,

Ltd.

50 kW

Model no: 50GF O/p type: 3-ph ac Speed: 1500 r/min

Fuel consumption: ≤0.5m³/kW/h Voltage Changing Ratio: less than 0.5

Intake gas pressure: 5-10 kpa O/p power: 132 kW

Steady voltage variation: ≤±1

$ 5000/set

State: Guangxi Country: China

http://www.gxzydl.com Fax:86-771-3323973 Tel:86-771-3334448

Contact person: Mr. Alex Zhang

Powerful engine Lower noise

Low fuel consumption

15.

Dongying Shengdong

Dynamoelectric Facility Co., Ltd.

80 kW

77.8% Quick Response Rate Model Number: SD-80 Speed: 1500R/1800R output power: 100kW

warranty: 1500h Electric starting method

Net wt: 2000kg Rated current: 180A

89.8% efficiency

$ 8000/set


www.dyshengdong.com.cn/ Fax:86-546-8357588 Tel:86-546-8357588

Contact person:Ms. Bella Shang

http://www.acmesgro.org/�

http://excellentpower.en.alibaba.com/company_profile.html#top-nav-bar�





http://www.gxzydl.com/�

http://www.dyshengdong.com.cn/�



FIN

AL

REP

OR

T

16.

Chongqing Honpan

Machinery Co., Ltd

3 kW

Model Number:HP3500GF starting mode: electric start

Speed: 3000rpm Rated V: 110V/220V/120V/380V

Type: 4-stroke/air cooling/single cylinder Rated Power: 2.8KW(50HZ) 3KW

One year warranty G.W: 47 kg

$105-195 / Set

Country: China State: Chongqing

http://www.honpan.net Tel:0086-023-66424915

Contact person: Mr. Leon Tao

Low gas consumption

Fast start Low noise

Strong power o/p

17.

Shandong Lvhuan Power

Equipment Co., Ltd.

20 kW

Model Number: LHBG20 3-ph ac o/p

Speed: 1500r/min Frequency: 50 Hz

cooling method: heat exchanger Rated Power: 20kW

Rated Voltage: 400/230v Warranty: 1 year or 1000 running hours

No. of cylinder: 4 Automatic alarm system

Weight: 750 kg Starting system: DC 24v Electric motor

$1000/set


www.lvhuandongli.com Email: [email protected]

Fax: +86-531-62337578 Tel: +86-531-62337767

Power saving Reasonable

price High quality

18.

Wuhan Acme

Agro-Tech Co., Ltd.

3 kW

Model Number: AM-3500BG Rated Power: 2.8kW

Voltage Regulator: Rated Voltage: 230v/120v Rated Current: 12V 8.3A

Speed: 1500R/M Gas Consumption(m3/kWh) ≤0.7 Starting System Electric/Manual

Net/Gross Weight(Kg) 79/81 Warranty: 1 year

$400 - 800 / Unit

Country: China State: Hubei

www.acmeagro.org fax:86-27-83315893 Mbl:86-13277936540


Very easy to operate

Clean and safe

19. Weifang

Yidaneng Power Co.Ltd.

18 kW

Model Number: YDN10GFZ~YDN500GFZ Output Type: AC Three Phase

Speed: 1500rpm Rated Current: 18A~900A No. of cylinders: 4, 6, 12 Automatic alarm system

Cooling method: Water cooled Gas Consumption (m3/kWh): 0.36

Starting Mode: Electric Cooling Type :Closed water cooling

1 year or 1500 hours warranty

$ 98-265/ unit

State: Shandong Country: China

Web: http://www.yidaneng.com/en/

Fax:86-0536-8224655 Tel:86-0536-8502767

Contact person: Mr. Guangzhou Zhang

http://www.honpan.net/�

http://www.lvhuandongli.com/�

http://www.acmeagro.org/�



FIN

AL

REP

OR

T

20.

Weifang Hualing Power Co.Ltd

15 kW

Model no: HUALING 3-ph ac o/p

Speed: 1500/1800 rpm Frequency: 50/60 Hz

Consumption rate: 0.3m3/kWh Power(W): 10-1000kW

Warranty: 1500hrs or 1 yr Rated voltage:

220/380V,230/400V,240/415V,120/240V No. of cylinders: 4,6,12

$3,000‐20,000/Set

Country: China City: Weifan

www.wfhlpower.com Fax:86-0536-8862839 Tel:86-13805-368712

Contact person: Mr. Huifu Zhang

21.

Zhengzhou Yudong New

Energy Co., Ltd 8 kW

Model Number: YG8-Z Output Type: AC Three Phase

Speed: 1500 / 1800rpm Frequency: 50hz / 60hz

wiring way: 3-phase 4-wire Gas consumption:0.33cbm/kWh

Exciting way: Brushless Starting mode: 24V DC electric

Rated power: 8 kW Rated Current: 14.4A

32.7% Quick Response Rate

$1,000‐3,000/Set

Country: China State: Henan

Web:http://www.yu-dong.com Fax:86-371-63698912 Mbl:86 13073731307

contact person:Ms. Mary Wang

low maintenance

cost, Longer life, Well performed control system,

Sound and alarm devices, Auto shut-down

22. Weifang

Yidaneng Power Co.Ltd.

12 kW

Model Number: GH30-GH625 Output Type: AC Three/Single Phase

Speed: 1500R/1800R Rated Voltage: 230/400V Rated Current: 18-900A

Governing Method: Electric Connection Type: 3Phase4Wire Cooling system: Water cooled

1year warranty four stroke

Rated Power: 10-500kW/12-625kva

$ 2000/set


www.yidaneng.com/en Fax:86-0536-8224655 Tel:86-0536-8502767

Contact person: Mr. Guanghui Zhang

ISO9001:2008 certificate

Compact design with low noise

heavy load durable

23. Weifang

Hualing Power Co., Ltd

20 kW

Model Number: HL Output Type: AC Three Phase

Frequency: 50HZ60HZ Rated Power: 20-500kW Rated Current: 20-2000A

3 phase 4 wire system No of cylinders: 4,6,12

Nominal speed: 1500/1800rpm Rated Voltage: 230/400V 240/480V

$ 1000/set

"State: Shandong Country: China"





FIN

AL

REP

OR

T

24.

Dongying Shengdong

Dynamoelectric Facility Co., Ltd

20 kW

Model Number: SD-20 Output Type: AC Three Phase

Rated Power: 20kW/25KVA Rated Voltage: 230/400V

Rated Current: 36A Fooling way: water cooled

Cylinder numbers: 4 Fuel consumption: 0.4M3/kWh Exciting method: self excited

Efficiency: 80.7%

$3000‐5000 / Set

"City: Dongying State: China"

Web:http://www.dyshengdong.com.cn/

Fax:86-546-8357588 Tel:86-546-8357588

Contact person:Ms. Bella Shang

25.

Camda New Energy

Equipment Co., Ltd

20 kW

Model Number: KDGH20-G Output Type: AC Three Phase

Speed: 1500/1800rpm Rated Power: 20 kW

Ignition system: Altronic Service Life: 30 years

Ambient temperature: 0-40℃ Gas consumption: ≤0.33cbm/kWh

Starting mode: 24VDC electric Air intake: Natural or turbocharger

$ 11700 / Set

"State: Guangdong Country: China"

www.camdagenerator.com E-mail: [email protected]

Fax: +86-769-88996200 Tel: +86-769-88996268

Low operation cost, Clean and environmental

friendly

26. Weifang

Yidaneng Power Co.Ltd

18 kW

Model no: YDN N0~YDNN500 Rated Voltage: 400/230V Automatic alarm system

Gas Consumption (m3/kWh) 0.36 Starting Mode Electric

Rated Current: 18A~900A No. of cylinders: 4, 6, 12

Rated Power: 10kW/12.5kva~500kW/625kva

$ 4,500/set


www.yidaneng.com/en/ Fax:86-0536-8224655 Tel:86-0536-8502767


Sound-proof weather-proof

canopy is optional

27.

Weifang Haitai Power

Machinery Co., Ltd

14 kW

Model Number: HT-14GF Rated Power: 14kW/17.5kva Cooling method: water cooled

Warranty: one year or 1500hours Start method: electric start

Regulator: AVR Speed: 1500/1800 rpm

Output Type: AC Three Phase Sea-level:<1000m

Fuel Consumption(cbm/kWh):0.6 Rated voltage: 400 / 230V, 380 / 220, 220 /

120 or as requirement NO. of Cylinder: 4 in line

$ 5105/set


www.hitepower.com Fax:86-536-8878025 Tel:86-536-8878025

Contact person: Mr. John Wang



FIN

AL

REP

OR

T

28. Shandong Shenghan

Power Co., Ltd. 20 kW

Model Number: SHC20GF Output Type: AC Three Phase

Speed: 1500/1800RPM Rated Voltage: 230/400V

Start method: electric Fuel: diesel and biogas

Warranty: 1 Year Rated Power: 20kW Rated Current: 36A

Combustion: direct injection 4 Stroke

$ 3000/set


www.sdshenghan.cn fax:86-536-8203300 Mbl:86-536-8217733

Contact person:Ms. maggie Xu

29. Miracle Power Systems Inc 60 kW

Model Number: MS, MT, MC Speed: 1500RPM,1800RPM

Rated Voltage: 400/230V;220/110V Rated Power: 6-640kW

Rated Current: 10.8-1903A 1,500 hours or 18 months

$5,000 / Set State: Sichaun, China

www.miraclepower.cn Fax: +86-769-83521488

Mail:[email protected] Tel: 86-28-84921381

30. Shanghai Better Industry

Co., Ltd.

3.5 kW

Model Number: BG350 Output Type: AC Single Phase

DC Output: 12V Rated Power: 3.5-4kW Peak Power: 3.5-4kW

Min. Fuel Consumption: 3.50M³/H frequency of generator:50/60hz

Speed: 1500 rpm Rated Current: 8.3 A

$1500‐5000 / Set

State: Shanghai Country: China

www.chinaicemakingmachine.com

Fax:+86-213965008 Mbl:+86-2160518061

Mail:li_joyce2003

31.

Zhengzhou Yudong

New Energy Co., Ltd

20 kW

Model Number: YDGM Output Type: AC Three Phase Speed: 1000RPM/1500RPM

Rated Current: 1440A Rated Voltage: 400V/230V,

Rated Power: 800kW Starting mode: 24VDC electric

Supply connection: 3 ph, 4 wires Warranty: 12 months

$4560‐19999 / Set

"State: Henan Country : China"

www.yu-dong.com Fax:86-371-63698912 Mbl:86 13073731307

Contact person:Ms. Mary Wang



FIN

AL

REP

OR

T


Power Co., Ltd 20 kW

Model Number: SHC20GF AC Three Phase

peed: 1500/1800RPM Frequency: 50/60Hz Start method: electric

Warranty: 1 Year Type: Open or silent type

Rated Power: 20kW Rated Voltage: 230/400V

Rated Current: 36A Combustion: direct injection

Regulator: AVR

$3000‐70000/Set


www.sdshenghan.cn fax:86-536-8203300 Mbl:86-536-8217733


low consumption

and big fuel tank

33.

Fuan Delixi Electric

Machinery Co., Ltd.

10 kW

Model Number: GF3 Output Type: AC Three Phase

Speed: 1500/1800rpm Rated Power: 10kW-500kW

Rated Voltage: 400/380v Number of Cylinders: 4

Cooling System: Water cooled Rated Current: 29A

$2,500/set

State: Fujian, China fadlx.en.alibaba.com

Fax:0086-0593-6396766 Mbl:0086-18650573318

Contact person: Mr. Allen Yang

Automatic Start/Stop

Parameters display(V/A/Hz)

34. Qingzhou

Feida Industrial Co..

40 kW

Output Type: AC Three Phase Brand Name: jdec

Rated Current: 72A Rated Power: 44kW/40kW

Speed: 1500r/min Rated Voltage: 400/230v

Frequency: 50

$1500‐25000 / Set

State: Shandong, China www.feidashiye.com

E-mail: [email protected] Fax:+86-10-65676932 Tel: +86-10-65682685

35.

Shenzhen Powertec Generator

System Co., Ltd

7 kW

Model Number: PCM220S-PCK906S Speed: 1500/1800rpm

Rated Power: 7kW-2000kW Rated Voltage: 230/400V;220/380V

Rated Current: 20-2500A Warranty: One year or 1000 hours

Starting Way: Electric starting

$2000‐10000 / Set

low weight easy to

operating, installation and maintenance



FIN

AL

REP

OR

T

36.


Machinery Co., Ltd

1 kW-6 kW

Model Number: HT8GF-HT100GF Output Type: AC Single Phase

Speed: 3000/3600 rpm Frequency: 50/60Hz

Rated Current: 1.8A-10.8A Excitation type: Self-excitation

Start Method: Electric Rated Voltage: 400/230V

Voltage regulator: Without AVR

$5,105 ‐ 386,800/Set

State: Shandong, China www.hitepower.com Fax:86-536-8878025 Tel:86-536-8878025

Contact person: Mr. John Wang

37. Weifang

Yidaneng Power Co., Ltd

10 kW

Model Number: YDNGFZ-10 Output : AC Three/Single Phase

Rated Power: 10kW/12.5KVA Speed: 1500/1800rpm

Rated Power: 10kW/12.5KVA Rated Voltage: 400/230V

Rated Current: 18A Starting Model: Electric

Warranty: 1 year or 1500 hours Cooling method: Water cooled

Gas Consumption(m3/kWh):0.36

$5000‐7000 / Set

State: Shandong, China www.yidaneng.com/en/ Fax:86-0536-8224655 Tel:86-0536-8502767


38.

Fuan Sheng Ke Electrical

Machinery Co., Ltd

5 kW

Model Number: LNG(Y)6800L(E) Brand Name: SKENGKE

Rated Current: 1.8-300KVA Rated Power: 7kW/6kW/5kW

Output Type: AC Single Phase " Rated Voltage:

115/230,220,230,240/110,120" Speed: 3000/3600 Warranty: 18month

Gas consumption: 0.3kg/kWh

$100 ‐ 390 / Set

State: Fujian, China www.fuanshengke.com

39.

Camda New Energy

Equipment Co., Ltd

24kW

Model Number: KDGH24-G Speed: 1500RPM/1800RPM

Rated Power: 24kW Rated Voltage: 400/230V

Rated Current: 43.3A Overhauling time: Long Performance: Durable Efficiency: High(85%)

$ 12000/set State: Guangdong, China


Fax: +86-769-88996200 Tel: +86-769-88996268

lower gas consumption



FIN

AL

REP

OR

T

40. Shandong Shenghan Power Co.

20 kW

Model no: 20 GFT Output Type: AC 3 Phase Rated Power: 8-1000kW Rated Voltage: 400/230

Frequency: 50/60HZ "Test: Four hours

Cooling System: Water cool Rated Current: 10-1800A

$ 6200/set State: Shandong, China www.sdshenghan.cn

Fax:86 - 0536 - 8203300 Mbl:86 - 187 - 53681019

41.

KAMA International

Trade & Technology

Co., Ltd

5 kW

Model Number: KMMG2800/KMMG5000 Rated Power: 5kW

Frequency: 50HZ/60HZ Output Type: AC Single Phase

Rated Voltage: 220V/380V 4-stroke

$70‐21000/set

State: Jiangsu, China www.kamawy.com.cn Fax:86-519-85215520

Mobile: 86-519-85202770 contact person:Ms. Tracy Wang


Power Co., Ltd

5 kW

Model Number: SHP Output Type: AC Three Phase

Frequency: 50/60 Rated Voltage: 220v

Rated Current: 18A-1800A Starting method: electric

Prime: 20-1000kW Starting method: electric

Cooling: air-cooled, water cooling

$1000‐8000 / Set

State: Shandong, China www.sdshenghan.cn

Fax:86 - 0536 - 8203300 Mbl:86 - 187 - 53681019

43. Shanghai

Better Industry Co.Ltd

3.5 kW


Speed: 1500R/M Frequency: 50/60HZ Rated Current: 8.3A Peak Power: 3.5-4kW

DC Output: 12V Min. Fuel Consumption: 3.50M³/H

$1500‐5000 / Set

State: Shanghai ,China http://www.chinaicemakingmach

ine.com Fax:+86-213965008 Mbl:+86-2160518061

Mail:li_joyce2003

44.

Shanghai Z&S International

Trading Co., Ltd

2 kW

Model no: HH2500 Output Type: AC Single Phase

Rated power: 2 kW Rated Voltage: 220V

Rated Current: 3.8~23A starting system: recoil/ket start

type: single-cylinder Small size Low noise

$40 ‐ 240 / Piece

State: Shanghai, China www.zsproway.com

Fax:+ 86 21 58993001 Tel:+86 21 5899 2801

Email: [email protected]

Stable output long life



FIN

AL

REP

OR

T

45. Model Number: BG350

Output Type: AC

Single Phase

Model Number: HT8GF--HT10GF Output Type: AC Three Phase

Frequency: 50/60Hz Warranty: one year or 1500hours

regulator: AVR start method: electric start

cooling method: water cooled Rated Current: 14.4-18A Rated Voltage: 400/230V

$5105/set State: Shandong, China

www.hitepower.com Fax:86-536-8878025 Tel:86-536-8878025

Contact person:Ms. John Wang

Well performed control system

Easy to operate

46. Speed: 1500R/M

Frequency: 50/60HZ


Speed: 1500R/M Frequency: 50/60HZ

Min. Fuel Consumption: 3.50M³/H DC Output: 12V

Peak Power: 3.5-4kW Rated Power: 3.5kW Rated Voltage: 230V

$1500‐5000 / Set

State: Shanghai, China http://www.chinaicemakingmach

ine.com Fax:+86-213965008 Mbl:+86-2160518061

Mail:li_joyce2003

47. Anhui Fenghuo

Renewable Energy Co., Ltd.

20 kW

Model Number: FH-BG Lifespan: 10 to 20years Rated Voltage: 400/230

Output Type: AC Three Phase Speed: 1500

Power: 3000w to 500kW Gas consumption: 0.7m^3/kWh

State: Anhui, China

http://www.fenghuo.org Tel:0086-551-64266997 fax0086-551-64266997

mail:[email protected]

48.

Weifang Guanghui

Agricultural Machinery Co.,

Ltd

10 kW

Model Number: YDNGFZ-10 Output : AC Three/Single Phase

Speed: 1500/1800 rpm Frequency: 50/60HZ

Rated Voltage: 400/230V, 380/220V Rated Current: 18A

Warranty: 1 year or 1500 hours Rated Power: 10kW/12.5kva

$4500‐6500 / Set

State: Shandong, China www.yidaneng.com Fax:86-536-8224655 Tel:86-536-8502767


49.

Shenzhen Genor Power

Equipment Co., Ltd

10 kW

Model Number: GNPG Speed: 1500rpm or 1800rpm

Output Type: AC Single Phase Rated Current: 18A

Ignition: Altronic Cooling System: Water Cooled Rated V:220V/380V, 230V/400V

1500 Hours Warranty Rated Power: 10kW

$8959‐9585 / Set

State: Guangdong www.gensetpower.com

Email:[email protected] Fax:0086-755-33263659 Tel:0086-755-23343515

Low Gas Consumption



FIN

AL

REP

OR

T

50. Weifang

Hualing Power Co.Ltd

100 kW Model Number: HUALING Output Type: AC Three Phase

Speed: 1500/1800 Frequency: 50/60

Rated V.:400V 230V 380V,400V Rated Power: 10kW TO 1000kW Consumption rate: 0.3m3/kWh

Warranty: 1 yr or 1500 hrs

$3,000‐20,000/Set

State: Shandong, China www.wfhlpower.com Fax:86-0536-8862839 Tel:86-13805-368712


51.

Camda New Energy

Equipment Co., Ltd

20 kW

Model Number: KDGH Output Type: AC Three Phase

Speed: 1500/1800 rpm Starting Mode: Electronic

Lifetime: 20 years Warranty: 1 year or 1500 run hours

Overall efficiency: Over 85% Rated Voltage: 415/400/380

$10500‐14500/set

"State: Guangdong, China" www.camdagenerator.com

E-mail: [email protected] Fax: +86-769-88996200 Tel: +86-769-88996268

52. Weifang U-Power Co., Ltd

25 kW Output Type: AC Three Phase Speed: 1500/1800rmp Frequency: 50/60Hz

Model Number: 25QFD Rated Current: 45A

Rated Power: 25kW/31.25kva DC 24V Electrical starting

Fuel consumption(Nm3/kWh): 0.6

$7900 / Set "State: Shandong, China" http://en.ulipower.com.cn

Fax: 86-536-8293520 Tel:86-536-8290122

Contact Person: Crown Yang

53. Weifang

Yidaneng Power Co.Ltd

10 kW Model No: YDNGFZ10~YDNGFZ500 Output Type: AC Three Phase

Speed: 1500/1800rpm Rated Power:

10kW/12.5kva~500kW/625kva Rated Voltage: 400/230V Rated Current: 18A~900A

Stroke: 4 Stroke Cold Style: Water-cooled Automatic alarm system

Warranty:1 year or 1500 run hours

$4500‐25000 / Set

State: Shandong, Country: China

www.yidaneng.com/en/ Fax:86-0536-8224655 Tel:86-0536-8502767


Auto start Sound-proof

54. Weifang


20 kW Model Number: HL-Biogas gen. Speed: 1000 1500 1800 rpm

Output Type: AC Three Phase Rated Power: 20-500kW Rated Current: 20-2000A

3 phase 4 wire system

$ 5000/set






FIN

AL

REP

OR

T

55. Weifang

Naipute Gas Genset Co., Ltd

30 kW Model Number: 30GFT Output Type: AC Three Phase

Speed: 1500/1800 rpm Rated Power: 30 kW

Rated Voltage: 230/400 V Rated Current: 54 A Cylinder number: 4

Starting Mode: Electrical Efficiency: 86.2%

$2000‐20000 / Set

" State: Shandong" Country: China

http://www.wfnpt.com FAX：86-0536-8910259 TEL：86-0536-8910261 Mail:[email protected]

56. Xiamen GTL

Power System Co., Ltd

20 kW

"Model Number: GNPG" Output Type: AC Three Phase

Speed: 1500/1800RPM Rated Power: 16~2000kW

Good quality. best price Gas consumption 0.33 CBM/khW

Longer life: Auto shutdown

$ 6000/set

" State: Fujian" Country: China

http://www.cngtl.com Fax:86-592-7898663 Tel:86-592-7196398

Contact person: Mr. Vicsun Wang

Well perform control

sound & light alarm devices


Power Co.,

15 kW

Model Number: SH-15GFZ Output Type: AC Three Phase

Rated Power: 15kW Cooling method: Water cooled

warranty: 1 year Starting method: Auto start

Rated Current: 27A Gas con.: less than 0.33cbm/kWh

$3000‐60000 / Set

www.sdshenghan.cn State: Shandong, China Fax:86 - 0536 - 8203300 Mbl:86 - 187 - 53681019

58. Zhengzhou

Yodong New Energy

10 kW Rated voltage: 400 v

Speed : 1500 rpm 3-ph ac output

Warranty: 1yrs or 1500 running hrs Gas consumption: 0.36m^3/kWh

$ 525/set place: Henan China

web:www.yu-dong.com mail:[email protected]

Fax:0371-63698912 Tel:0371-60170555

environment friendly

Fuel: biogas , natural gas

59.

Weifang Guanghai Machinery

co.ltd

14kW

Speed: 1500rpm/1800rpm Rated voltage: 380/220 Water cooled method

Can work at 55`c Three phase ac o/p

$1,000


country: china web: www.yidaneng.com

Fax:86-0536-8224655 Tel:86-0536-8502767

60.

Camda New Energy

Equipment Co., Ltd.

20 kW

Model Number: KDGH Output Type: AC 3 Phase

Speed: 1500RPM Rated Power: 20kW TO 500kW

Rated Voltage: 400/230 Rated Current: 36 to 900A

$10,000

"State: Guangdong" Country: China


Fax: +86-769-88996200 Tel: +86-769-88996268



FIN

AL

REP

OR

T

Temperature rise: 20 to 40 Celsius Overhaul 25000~28000 hours

Altitude: Sea level 500 m below

61.

Chongqing Fengdong

Import & Export Co., Ltd

20 kW

Output Type: AC Single Phase Speed: 1500RPM

Rated Power: 20kW Rated Voltage: 400/230

Rated Current: 36 Voltage Regulator: AVR

Four-Stroke, Air-Cooling method

Electric starting

$80‐50000 / Set

www.cqfengdong.cn Country: China(Mainland)

Tel: 862367603513 Email:[email protected]

Easy to carry Easy to Move , Electrical speed

control

62. Zhengzhou

Yudong New Energy Co., Ltd

20 kW

Model Number: YDGM100-G Speed: 1000RPM

Output Type: AC Three Phase Rated Voltage: 400/230V

Rated Current: 108A 3-phase 4-wire

start mode: electric Excitation: brushless

$3,000‐8,000/Set

"State: Henan" Country: China

http://www.yu-dong.com mail:[email protected]

Fax:0371-63698912 Tel:0371-60170555

environmentally friendly

steady power Biogas

63.


Machinery Co., Ltd

5 kW

Model Number: HT5GF Output Type: AC Three Phase

Speed: 1500 rpm Rated Power: 5kW

Rated Voltage: 400/230V Rated Current: 9A

Governor method: Electric Starting model: 24V Warranty: 12 month

$ 4600/set High

performance High quality

64.

Shenzhen Sunrise

Econergy Co., Ltd

10 kW

Model Number: LHBG10kW Output Type: AC 3 Phase

Speed:1800rpm,3000rpm/3600rpm Frequency: 50HZ/60HZ

Rated Power: 8kW/10kW Rated Voltage: 400V/230V

Rated Current: 16A Warranty: 1 Year or 3000Hours

Automatic alarm system electronic or manual control

$5,000/set

"State: Guangdong" Country: China

http://www.bio-eco.co Fax:86-0755-84559112 Tel:86-0755-84559112

Contact person: Mr. Alex Pan



FIN

AL

REP

OR

T

65. Wuhan Acme

Agro-Tech co.Ltd

5 kW

Gas Consumption Ratio (m3)/ kW.h:3.5/2.7 Output Type: AC or DC

Frequency: 50hz or 60hz Frequency: 50hz or 60hz

Rated Power: 3kW Rated Current: 12V 8.3A Starting type: electrical

Net wt: 88 kg Model Number: AM-5000

$700‐900 / Unit

Country: China http://www.acmeagro.org

State: Hubei Fax:86-27-83315893 Mbl:86-13277936540


Easy to operate Durable, High

quality

66.

Weifang Guanghui

Agricultural Machinery Co.,

Ltd

10 kW

Model Number: YDNGFZ Output: AC Three/Single Phase

Speed: 1500/1800 rpm Frequency: 50/60HZ

Rated Power: 10kW-500kW/75kva Rated Voltage:400/230V, 380/220V

Rated Current: 18-900A No. of Cylinder: 4

Gas Consumption (m3/kWh): 0.6 Cooling Type: Closed water cooling

$4,500 ‐ 7,000 / Set

State: Shandong, China www.yidaneng.com Fax:86-536-8224655 Tel:86-536-8502767


Weather proof Easy control

and maintenance

67. Weifang

Heng An Imp& Exp Co., Ltd.

10 kW

Model Number: LHBG20 Speed: 1500RPM Frequency: 50HZ

Output Type: AC Three Phase Rated Voltage: 230/400V

Rated Current: 16 Power range: 10-700kW

3 phase 4 wire 1 year or 1500 running hours warranty

Automatic alarm system

$5680‐6400 / Set


www.wfhengan.com Fax:0536-6103202 Tel:0536-6103201


68. Weifang


10 kW

Model Number: HL Output Type: AC Three Phase

Speed: 1500/1800rpm Rated Power: 10-1000kW Rated Current: 20-2000A

Rated Voltage: 220/380v,230/400v 3 phase 4 wire system

$5,200 / set

State: Shandong, China www.wfhlpower.com Fax:86-0536-8862839 Tel:86-13805-368712



Power Co., Ltd

Model Number: SH100GFZ Output Type: AC Three Phase

Speed: 1500/1800RPM Frequency: 50/60HZ Rated Current: 180A Rated Power: 100kW

Cooling method: water cooling Warranty: 1 year

$5,000 ‐ 9,999 / Set

State: Shandong, China www.sdshenghan.cn fax:86-536-8203300 Mbl:86-536-8217733




FIN

AL

REP

OR

T

70.

Fujian Saint Meilan

Motor Wiring Co., Ltd.

20 kW

Model Number: SMD,SMY Output Type: AC Three Phase Rated Power: 20kva--1000kva

Speed Governor: Electric Rated Current: 25-2000A

"Rated Voltage: 110V/240V, 220V/380V"

Warranty: 1 yr

$1,999‐5,999/Set

State: Fujian, China http://www.smlmotor.com Fax:0086-591-83806990 Tel:0086-591-28315566

Contact person:Ms. Nina Lin

environment friendly

professional test

71. Weifang

Hualing Power Co., Ltd.

25 kW

Model Number: HL25, Cold Style: Water-cooled

Start: Electric Start Cylinder: Multi-cylinder

Production Rate: 25kW-2000kW Stroke: 4 Stroke

Frequency: 50 Hz Three-phase four wire system.

$1000‐6000 / Set

State: Shandong, china www.wfhlpower.com Fax:86-0536-8862839 Tel:86-13805-368712


72.

Shenzhen Genor Power

Equipment Co., Ltd

20 kW

Model Number: GNPG Output Type: AC Three Phase Speed: 1500rpm or 1800rpm

Frequency: 50HZ/60HZ Rated Power: 20kW to 1000kW Cooling System: Water cooled Rated Current: 36A to 1800A

1500 Hours Warranty overhaul term: 25000 ~ 30000 hours

$13,259/ set State: Guangdong, china www.gensetpower.cm

Email:[email protected] Fax:0086-755-33263659 Tel:0086-755-23343515

Low Gas Consumption

73. Weifang Heng An

Imp& Exp Co., Ltd

10 kW

Model Number: LHBG20 Output Type: AC Three Phase

Rated Voltage: 230/400V Rated Current: 16

Power range: 10-700kW 3 phase 4 wire

Rated power: 10 kW Cylinder no: 4

1 year or 1500 running hours

$5680‐6400 / Set

State: Shandong, China www.wfhengan.com Fax:0536-6103202 Tel:0536-6103201




FIN

AL

REP

OR

T

Biogas Generator Suppliers in India

S.N Name of the Suppliers Capacity Generator Specification Photograph Cost / Price Contact Details Remarks

1.

Patvin Auto Products Pvt. Ltd

3 kW

Model Number: MA3000 Brand Name: PATVIN-Powerking

Output Type: AC Single Phase Speed: 7000 RPM

Rated Current: vary Rated Power: 3 KW

Fuel: Gas Frequency: 50 Hz

$2,500 /set Country/Region: India

State: Gujarat www.patvinauto.org

Mobile: +(91)-9824079204 Contact person: Mr. Dhaval

Patel Tel:+(91)-(265)-2631474

Environment Friendly Durable

Model Number: PG010 Type: Gas based generator

Run on Biogas: save the diesel Brand Name: PATVIN

$ 1900/set High quality Easy control

2. EMSI India Electricity production ranges from 3 kW to

500 kW

State: Tamil Nadu City: Chennai

Fax:91 Tel:91-9551563864 Contact person: Mr.

Manivannan V Mbl:9551563864

High performance

3. Siya Instruments

No. of Cylinders: 1 or 2 Output voltage: 230/415v

Power factor: 0.8 1-ph or 3-ph output

Cooling method: Water cooled, air cooled Speed: 1500 rpm

mail: [email protected] Phone: +91-294-2491903

Fax:91-0294-2491903 Mbl:00919414156154

Contact person: Ms. Rachna Jagetiya



FIN

AL

REP

OR

T

4. Biomate India, New Delhi

3.5 kW

TW5000H Rated voltage: 110/220/380v

Frequency: 50/60 Hz single cylinder,4-stroke,force air-cooled

Net wt: 85 kg Consumption (m3/h ): 0.35

Rated o/p: 3.5 kW

State: New Delhi Country: India

Phone: +(91)-8376805941 www.fermentor.co.in

Mail:[email protected] Contact person: Dr. Sharma

Mbl:+(91)-9910896223

Durable Cost saving low noise

5.

Prakash Marketing, Hyderabad

15 kW Range: 15kw to 82.5 kW Resistance to corrosion

Highly efficient Easy installations

Rated power: 15 kW Frequency: 50 Hz/60 Hz Speed: 1500/1800 rpm

Andhra Pradesh, India www.indiamart.com/prakash-

marketing-hyd/biogas-generators.html

Mbl:(91)-8978789736 Contact person: Mr. A. K. Singh Mail:prakashgensethyd@gmail.

com

Low gas consumption

Low noise

Biogas Generator Suppliers in Bangladesh S.N Name of the

Suppliers Capacity Biogas Generator Specification Photograph Cost/price Contact

1 Mak international 2 kW

Brand Name: Heseng Output Type: AC Single Phase

Rated Voltage: 220 Rated Current: 2

can run by NG/LP/CNG /Bio-Gas

Country: Bangladesh, Dhaka http://www.makbay.com

Mail:[email protected] Fax:0092-42-5749902

phone:0092-42-5749903

2

Hi-Tech Machinery Co.

Ltd 5 kW

Brand Name: HI TECH Output Type: AC Three Phase

Rated Power: 4.6 kW Speed: 3000

Low noise gas generator 1 yr guarantee.

Country: Bangladesh, Dhaka http://www.hitechmc.com Fax:00880-02-8919715 Tel:00880-2-8932074 Mbl:88-01711985667

Contact person:Ms. SENA QU

3 Prince Engineering Ltd

Model Number: GF-600 Brand Name: Shengli

ignition system: altronic Speed: 1000rpm

Country: Bangladesh, Dhaka http://www.pelbd.com

Mail:[email protected] Phone:+880-171-3044850

Skype: pelbd.prince QQ: 1841566794


http://www.alibaba.com/member/prince81.html�

http://www.alibaba.com/member/prince81.html�



FIN

AL

REP

OR

T

Biogas Generator Suppliers in Germany

1 Tuba Turbine GMBH

Model Number: G 3516 Frequency: 50 Hz/ 400v

Running hrs: 45 Brand Name: Caterpillar

EUR 39000-

54000/set

City: Frankfurt am Main Country: Germany

Tel:49-69-505047301 Mbl:491717525838

Fax:49-69-505047450 Contact person: Mr. Frank Kraemer

Biogas Generator Manufacturers in India and China S.N Name of the Manufacturers Contact

1 Perfect Gas Generators

B-301, Okhla Industrial Area, Phase-1, New Delhi, Delhi - 110020, India

+91-9311160471/ 9310240810/ 9310440810 +91-11-20513424

2 Prakash Marketing

Prakash Marketing # 11, Sindhi Colony Behind Visl Building j.C Road, Bangalore, Karnataka, India

91-080-22483230

3 Asia Africa Trade Links

B 032, Belvedere Tower, Dlf Phase 2, Gurgaon, Haryana - 122002, India

+91-124-3225427 +91-124-2350483

4 S. G. P. L

Sarafa Bazar Lashkar Gwalior, Gwalior, Madhya Pradesh - 474001, India

0751-2632841 91-0751-2632844

5 Enerzea Power Solution Pvt. Ltd. 1304, 2nd Floor, 3rd Stage,Near Chikka Bommasandra

Cross,Yelahanka New Town,Bangalore - 560065, Indiatel-fax: +, Bangalore, Karnataka, India

6 Chroma Ator G 85 , Preet Vihar, New Delhi, Delhi, India

91-11-43023798

7 Clarke Energy India Pvt Ltd 412, 4th Floor, Race course Tower, Gotry road,

Vadodara, Gujarat, India 91-265-2352988

8 Macii Labs Faridabad, Faridabad, Haryana - 121005, India

9 MPMC POWERTECH CORP

Address:No. 111 Luda Rd. Luyuan Industrial Zone Pudong Shanghai China

Tel:+86 21 61049555/60970158 MP:00-86-18621857018 (Mr. Robert)

Fax:+86-21-60970155 E-mail: [email protected]

10 Wuxi Baifa Power Ltd.

Plot 101-D, Airport Road, National New High-Tech Industrial Dev. Zone, Wuxi, Jiangsu Province,

China P.C: 214028 International Dept.

Tel: +86 510 8534 2666 Mobile:+86 159 6187 5555 Mr. Eddie Yu

FAX: +86 510 8534 5333

E-mail: [email protected]

11 Alibaba Group

Alibaba Group Corporate Headquarters: 969 West Wen Yi Road

Yu Hang District Hangzhou 311100

China



FIN

AL

REP

OR

T

Tel: (+86) 571-8502-2077 Fax: (+86) 571-8526-9066

India Office: Premises No. 201-203

2nd Floor, Palai Plaza Building Shankar Mottam Road, Dadar (East)

Mumbai 400014 India

Tel: (+91) 22-4233-5252 Fax: (+91) 22-4233-5281

12 Camda Generator Work Co., Ltd

Add: Tangchun Industrial Zone, Liaobu Town, Dongguan City, Guangdong, P.R.C

Tel: +86-769-88996200 Fax: +86-769-88996200

Http://www.camda.cc E-mail: [email protected]

13 Advance Power Technologies E 7/b-586, Sangam Vihar, New Delhi,

Delhi- 110062, India +91-9212743981

14 Geeta Electronics

Plot No. 32 Mahapura Ajmer Road Bhankrota Jaipur 302026 City - Jaipur, Rajasthan,

India 09672607744

Annex 2: List of Flow Meter Manufactures/Suppliers Flow Meter Suppliers in Nepal

S.N. Name of The Suppliers Cost/price Contact Details Remarks

1 Surya Enterprises 1675 plus13% VAT +977-1-4230814 Tripureshwor, Kathmandu Flow meter available as per demand.

2 General Overseas 1010 9849712191

3

Associated Enterprises AE International Pathscience

International Hyonjan Electrical and Fabricators

Sailesh Baniya 9851063194, 01-4248930

[email protected] New road, Kathmandu

Ultrasonic Flow Meter Water/ other liquid flow measurement in different water intensive

process Specifications: Flow measurement

Flow Meter Suppliers in China

S.N. Name of The Suppliers Technical Specification Photograph Cost/price Contact Details Remarks

1

Beijing Airport Beiguang

Instruments Co., Ltd.

Model no: F56 Brand Name: BABI Low pressure lost

4 digit flow rate & 8 digit totalizer 4-20 mA & Scale pulse output

$185-1800 /

Set

State: Beijing Country: China

Web: http://www.bab-i.com Fax:86-10-80487531

Mbl:15810420059 Contact person: Mr. David Liang

2

Beijing Sincerity Automatic

Equipment Co., Ltd.

Model Number: DMF-Series Work pressure:( 0~32) MPa

Environment temp: -20°C ~ +70°C Response time:0.1s~5s, adjustable Response time:0.1s~5s, adjustable

$200-5000 /

Unit

State: Beijing Web: http://www.bjssae.com E-mail: [email protected]

Fax : 010 -52073955 Tel : 010 -52073959

Handle the problem

high or low temp. high

pressure, high velocity

3

Yantai Chemins Instrument

Co., Ltd

Model Number: LUGB Velocity of flow: ±0.1 - 12 m/s

Accuracy :±1% Velocity of flow: ±0.1 - 12 m/s Power: 220V+/-10% AC 50Hz Env. temperature: -10 ~ +45

Relative humidity not more than 85%

$500-

800/Piece


Web: http://www.chemins-tech.com Fax:0086-535-2945018 Tel:0086-535-8381357

Contact person: Mr. Chemins

http://bab.en.alibaba.com/�








FIN

AL

REP

OR

T

4

Sichuan Vacorda Instruments

Manufacturing Co., Ltd

Model Number: LZ Warranty: 18 months

Accuracy: 1.5 Standard Flow ratio:10:1

Application: low flow rate Lifetime: 5-10 yrs

$ 55 - 300/Piece

State: Sichuan Country: China

Web: http://www.hbyb.com E-mail: [email protected]

Fax: 86-813-2629091 Tel: 86-813-2629092

5 Shaanxi Yuke Test & Control

Technology Co., Ltd

Model Number: YK-FM001 Nominal diameter: DN300mm~DN3000mm

Accuracy: -1.5---+1.5 Low power consumption, strong stability

small pressure loss

$2-100 /

piece

State: Shaanxi Country: China

Web: http://www.yksensor.com Fax:86-29-88644945 Mbl:86-13363997735

Contact person:Ms. luna li

Linear measurement principle can

achieved Strong stability

6

Shenzhen Phoein Technology

Co., Ltd

Model Number: LF10L Flow Range: 0-2000Nm3/h

Range Ratio: 100:1 to 1000:1 Operating Pressure:

10MPa at 200C, 9.5MPa at 2000C Response time: 0.75s

$ 300/piece

Country: China Web: http://www.phoein.com

pressure loss be negligible.

7

Anhui Tianwei Instrument Co., Ltd

Model Number: LUGB biogas flow meter Power: 24VDC,battery Output: 4~20mA/ pulse Diameter: 25~300 mm Accuracy :1.0%,1.5%

Low pressure loss, low cost

$ 100-900 / Set

State: Anhui Country: China

Web: http://www.ahtwyb.cn Fax:86-0551-5661780 Tel:86-0551-5661688

Contact person: Mr. YAN LI

stable performance

and long service life

8

Shanghai Anjun E-Tech Co., Ltd

Model Number: AVZ

Accuracy: 0.2% Flow range rate: 10:1

Normal Diameter: DN3-DN3000 Pressure range: 0.6-40MPa

Output : 4-20 mA, pulse

$ 137/set

Country: China Web: http://www.aetsensor.com

State: Shanghai Fax:86-21-69595611

Tel:0086-021-18616867388 Contact person: Mr. Anjun Sh

Mbl:15221689158

9

Hangzhou Darhor Technology Co.,

Limited

Model Number: DH250series Accuracy: 0.2%,0.5%,1% optional

Flow span: 10:1 Warranty: 1 year DN: 2~300mm

Temperature: -40~+450℃ Supply power: 12-28v dc

$100-

1,000/Set

State: Zhejiang Country: China

Web: http://www.darhor.com Fax:86-571-85781527 Tel:86-571-88964377

Contact person: Mr. Andy dudu

All metal construction Strong and

stable

http://darhor.en.alibaba.com/company_profile.html#top-nav-bar�





FIN

AL

REP

OR

T

10

Jiangsu Huahai M & C

Technology Co., Ltd

Model Number: HLVZ Principle: Differential Pressure Application: Gas, liquid, steam

State: Jiangsu Country: China

http://www.ehuahai.com Fax:86-517-86981010 Mbl:8613655239623

Contact person:Ms. Sheila Xu

11

Hangzhou Darhor

Technology Co., Limited

Model No :vortex flow meter warranty: one year flow range: various medium: liquid, gas

Environment temp:-20~+55 Pressure class: PN

1.0MPaPN1.6MPaPN2.5MPaPN4.0MPa

$150-1000 /

Set


Web: http://www.darhor.com Fax:86-571-85781527 Tel:86-571-88964377


12 Kaifeng Kaide

Flow Instrument Co., Ltd

Model Number: LUGB Pressure:1.6MPa,2.5MPa,4.0MPa

Accuracy:±1.5%, ±1.0% Applicable to both gas and liquid

Temperature:-40~+350 Caliber(mm):15~2000

$ 350/set

State: Henan Country: China

Web: http://www.kdyb.com/ Fax:86-378-6682432 Tel:86-378-3212788 MSN:[email protected]

mail: [email protected]

High accuracy High reliability

Simple structure, no moving parts

13 Shanghai

Jiasong Machine Co., Ltd

Model Number: OGM2 Flow Range: 30-300L/min

Accuracy: ±0.5% Inlet and Outlet: NPT2" or BSP2" Max Working Pressure:1.8MPa

$100-700/Piece

"State: Shanghai Country: China"

www.jiasongmachine.com: Fax:86-21-69593330 Mbl:013917156756

Contact person:Ms. Christing Yu

High accuracy, Easy

maintenance Low pressure

drop

14

Zhejiang Sanzhou

Gas Meter Co., Ltd

Model Number: SZ-G1.6T/G2.5T/G4.0T Maximum pressure: 50KPa

Pressure loss less than 200pa Working temp: —10~+40

Max. flow-rate Qmax:6m^3/h

$10 - 100/Piece

Country: China Web:

http://www.szrqb.com/en/index.asp Phone:86-577-61729555

Contact person: JIM zheng

Long service life, accurate measuring corrosion resistance

strong

15

Shenzhen Puxin

Technology Co., Ltd

Model Number: JBD2.5-SA Brand Name: Puxin

Nominal flow rate: 2.5 m3/h Pressure loss, ≤200Pa Long term performance

Max. working pressure:10KPa

$60 - 70 / Set

"State: Guangdong Country: China"

www.puxintech.com Fax:86-755-89323983 Tel:86-755-28938251

Contact person: Mr. Vane Yen Mbl:13425127057

Accurate measurement

Advanced technology New design

structure

http://www.ehuahai.com/�



FIN

AL

REP

OR

T

16

Sichuan Vacorda Instruments

Manufacturing Co., Ltd

Model Number: LZ Warranty: 18 months

Pressure loss:7KPa-70KPa Lifetime: 5-10 years

Power supply: Standard: 24VDC two-line 4~20mA

Application: small pipe, low flow rate .Flow ratio:10:1, special type: 20:1

$100-256/Piece

"State: Sichuan Country: China"

Web: http://www.hbyb.com E-mail: [email protected]

Fax: 86-813-2629091 Tel: 86-813-2629092

power-fail protection

function long life time.

17

Zhejiang Koeo Petroleum Machinery Co., Ltd

Model Number: OGM-50 Max. Flow Rate(L/Min): 120

Max. Pressure: 3.4Mpa Precision: ±0.5%

Min. Flow Rate(L/Min): 20 low pressure drop

$10.-150/Piece

State: Zhejing Country: China

http://www.koeochina.com Fax:86-577-67365481 Tel:86-577-67355480

contact person: Ms. Judy Wong Mbl:13634222572

18 Shenzhen

Phoein Technology Co., Ltd

Model Number: ZF605 Repeatability: ± 0.1% FS

Range Ratio: 10:1 Signal Output: 4-20mA

Power Supply: 13.5~30V DC Accuracy Class: 1.0, 1.5, 2.0, 2.5

Explosion-proof Alarming switches can be optimized

$100-1,000/Set

State: Guangdong, Country: China

http://www.phoein.com

19 Quanzhou Rixin

Flow-meter & Instrument Co.,Lt

Model Number: SBL Brand Name: RIXIN

High accuracy Easy to operate

Level of security: Explosion-proof certificate

$100‐5888/Piece

State: Fujian Country: China

www.rixin-flow.com/en Phone:86-0595-28203300

20

Jiechuang Science And


Model Number: 040 Brand Name: jc

Not allow high pressure High accuracy

$100‐5000 / Set

State: Jiangsu, China http://www.jiechuang.com

Fax:86-517-86980638 Tel:86-517-86989565

Contact person:Ms. Emilia Xu Mbl:008615052699328

21 Dalian Zerogo

Instrument Co., Ltd

Model Number: Turbine biogas gas flow meter

Accuracy: 0.2-1.5% Power Supply: 12-28VDC,

Output Signal: Pulse, 4-20mA Condition Temp: -200 --- +500

Caliber:DN65-3000mm flow range 0.01m3/h to 800m3/h

$430‐1600 / Set

State: Liaoning, China http://china-zerogo.en.alibaba.com/

Email:[email protected] Fax:86-411-83897310 Tel:86-411-83895740 Post Code：116038



FIN

AL

REP

OR

T

22 Shanghai Anjun E-Tech Co. Ltd

Model no: AVS100 pressure:1.6MPa,2.5MPa,4.0MPa

o/p: Pulse, 4~20mA Accuracy: +/-1.5% (gas)

Temp of Medium:-40~+350 can work lasting for 2 years

$99‐9999/Piece

State: Shanghai Country: China

http://www.aetsensor.com Fax:86-21-69595611

Tel:0086-021-18616867388 Contact person: Mr. Anjun Sh

Mbl:15221689158

High accuracy Used gases,

steam and liquids

23 Chengdu Andisoon Measure Co., Ltd.

Model Number: AMF015-25 Brand Name: Andisoon

Ambient Temp: -25℃~+55℃ W.P: ≤25MPa

Relative Humidity: ≤95% Density: 0.001g/cm3

$2100‐3249/set

State: Sichuan, china http://www.andisoon.com

Tel:86-028-63165804 Contact person: Ms. Annie zhou

Good stability high pressure

gas measurement

24 Anhui Tianwei Instrument Co., Ltd

Model Number: LUGB Output: 4~20mA/ pulse Diameter: 25~300 mm Power: 24VDC,battery

Accuracy:±1.5% Rated Pressure: GB 1.6MPa, 2.5MPa,

4.0MPa Explosion Proof: Exd IIB T3~6 / Ex ia IIC

T3~6

$100‐900 / Set

State: Anhui, China http://www.ahtwyb.cn Fax:86-0551-5661780 Tel:86-0551-5661688


Low pressure loss, Low cost High reliability

25 Zhengzhou

Protech Mechanical Equipment Co., Ltd

Model Number: DN25 Accuracy: 1.0; 1.5

Relative temperature: 5%~95% Medium temp: -20℃~80℃

Atmosphere pressure: 86Kpa ~ 106Kpa Temperature: -20℃~50℃

Explosion-proof grade: ibII BT4

$99-999 / Set

state: Henan Country: China

http://www.china-protech.com Fax:86-371-67103035 Tel:86-371-56763132

Contact person: Mr. Ben Ma

Sensitive reaction, high

accurate structure and

good reproducibility

26 Hangzhou Darhor Technology Co.,

Limited

Model Number: DH-VF biogas flow meter Signal output: 4~20 Pulse

Explosion-proof:ExiallCT4,ExiallBT4 Size: DN15 ~ DN500

Accuracy: ±1.5% for gas Power Supply: 24VDC / 3.6V Lithium

Battery Rated Pressure: 1.6MPa, 2.5MPa, 4.0MPa,

6.4MPa

$299-2,999/set

State: Zhejiang, China http://darhor.en.alibaba.com

Fax:86-571-85781527 Tel:86-571-88964377


Wide measuring range

turndown ratio 10:1

27 Quanzhou Rixin Flow-Meter And

Instrument Co., Ltd.

Model Number: SBL Brand Name: Ri Xin o/p: 4-20mA, 0-10V,

Wide measure range, bigger than 1:30 Good repeatability, generally 0.10.08% Wide measure range, bigger than 1:30

$875-55588/set

State/Region: Fujian, China www.rixin-flow.com/en

Phone:86-0595-28203300

Small pressure loss, No

movable part



FIN

AL

REP

OR

T

LCD display Remote control

28 Shanghai Cixi Instrument Co., Ltd

Model Number: XD300,XD600 Brand Name: GN

Flow range: 0-100SLM Accuracy: 1%FS

Power Supply: 7-16vdc,1A Responding time: Less than 1s

Max. Pressure: 10MPa Working temp: 5-65°C

$300-1200/set

State/ Region: Shanghai, China www.gnflowmeter.com Fax:86-21-5763 4942 Tel:86-21-5763 2436

Cont. person: Ms.Agnes Peng

customize flow range, high accuracy


Model Number: LWQ flow meter Medium: gas

Accuracy: 0.5%,1.0% OP Temperature: -10~80℃

Diameter: 10~250mm Output over size: M20*1.5 Connection: flange, screw

$100-1500 / Set

State/Region: Anhui/ china http://www.ahtwyb.cn Fax:86-0551-5661780 Tel:86-0551-5661688


30 Hangzhou Darhor Technology Co.,

Limited

Model Number: DH250 Accuracy: 0.2%,0.5%,1% optional

Flow span: 10:1 Warranty: one year

Environment temp: -40~+450℃ power: +12V DC,+24V,optional

$150-350 / Set

State/ Region: Zhejiang, China http://darhor.en.alibaba.com

Fax:86-571-85781527 Tel:86-571-88964377


specific applications, easy to install

31 Dalian Zerogo Instrument Co., Ltd

Condition Temperature: -200 --- +500 Accuracy: 0.2-1.5% PN: 0.6 --- 42MPa

Measure Ratio: 110 Repeatability: 0.1% ~ 0.08%

Measure Ratio: 110 4-20mA, 0-10V,o/p

$290-800/piece

State/Region: Liaoning, China china-zerogo.en.alibaba.com/ Email:[email protected]

Fax:86-411-83897310 Tel:86-411-83895740 Post Code：116038

Small pressure loss, safe and

reliable


"Model Number: LWQ Biogas flow meter" Diameter: 10~250mm Accuracy: 0.5%,1.0%

OP Temperature: -10~80℃ Output over size: M20*1.5

"Signal outputs: Pulse output or 4~20mA current output"

$100 - 1,500/Set

state/Country: Anhui, China http://www.ahtwyb.cn Fax:86-0551-5661780 Tel:86-0551-5661688




FIN

AL

REP

OR

T

33 Dalian Yuexiu Lubricating Oil

Instrument Agency

Model Number: HS-LUGC Brand Name:: Honestar

Condition Temp: 400C~+550C Output signal: 4~20mA

LED Display DC supply: +3.6V, +12V, +24V

pressure:1.6Mpa,≤2.5Mpa

$0-600 / Set State/ country: Liaoning, china http://cnhonestar.en.alibaba.com

34 Dalian Zerogo

Instrument Co., Ltd

Accuracy grade: ±0.2% Temperature range: -60℃ -- +200℃

Caliber: DN1-150 Temperature accuracy: ±0.002g/cm3

Output of frequency/pulse: 0Hz~10kHz Output of current loop 4mA-20mA

Atmospheric pressure range: 86kPa--106kPa

$530-3000/set

State/ Country: Liaoning, China http://china-zerogo.en.alibaba.com


35 Shaanxi Gao Kai

Electrical Equipment Co., Ltd

Model Number: GK-LUXB Operating pressure: 1.6---42 Mpa

Accuracy: 1.0/1.5 Operating temperature: under 300degree

Flow rate range: 3---1900(m3/h) 1 year warranty

$100-5000/set

State/Country: Shaanxi, China shaanxigaokai.en.alibaba.com

Tel:086-029-88470520 Mbl:13389280760

Contact person:Ms. Bonnie liu

not easy corrosion, good

performance

36

Anhui Huining Electric Meter & Appliance Group

Co., Limited

Model Number: FM Medium temperature: -30-80°C

Accuracy class: ±1.5%,±1% Nominal pressure: 0~55MPa Repeatability: 0.1%~0.08%

$100-1000 / Set

State: Anhui, China ahngroup.en.alibaba.com

Fax:86-550-7630066 Tel:86-550-7651716

Cont. person: Mr. David Shine

Good repeatability,

High accuracy, small pressure

lose

37 Yueqing City

Tianqiang Electrical Co., Ltd

Model Number: 99T1/SQ48 ( 303 ) Measuring Range: 0~15A

Operating Temperature: -25℃~+50℃ Supply Voltage: 220v,380v Accuracy Class: 1.0~2.5

Display Type: Analog Only

$1.79-3.65/set

State: Zhejiang, China http://www.tqele.cn

Fax:86-0577-62696209 Tel:86-0577-62696209

Contact person: Mr. Leon Louis

High Sensitive, pollution free

38 Kaifeng Kaide

Flow Instrument Co., Ltd

Model Number: LWG Pressure(Mpa):2.5,4.0,6.3,10,16

Brand Name: kaide 8~24V.DC,power supply

Temperature: -20°C~+55°C Accuracy: 1.5%

Flow range: 4-200m^3/h

$ 307/set

State/country: Henan, China http://www.kdyb.com/ Fax:86-378-6682432 Tel:86-378-3212788

E-mail: [email protected]

High accuracy, easy installation


Model Number: LUGB Power: 24VDC,battery

Output: 4~20mA/ pulse output Diameter: 25~300 mm Accuracy 1.0%,1.5%

$100-2500 / Set

State: Anhui, China http://www.ahtwyb.cn Fax:86-0551-5661780 Tel:86-0551-5661688


Long Service Life, Simple

Structure



FIN

AL

REP

OR

T

Explosion Proof

40

Shenzhen Phoein

Technology Co., Ltd

Model Number: LF501 Repeatability: ± 0.2% of indication

Accuracy:± 1% Power Consumption: ≤1W

Signal Output: Analog Environment Temperature: -25~+85℃

"DN: 15-300mm"

$150-1000 / Set

Country: China (Mainland) http://www.phoein.com

can display instantaneous

flow cumulative flow,

alarm status

41 Dalian Zerogo Instrument Co., Ltd

Flow rate range of media: 0.3---12m/s Accuracy: 0.2%,0.3%,

"Size:DN15-DN30004-20mA" Conductivity: ≥ 1μ s/cm,≥ 5μ s/cm

Repeatability: 0.06%,0.1% Size:DN15-DN3000

$270-800 / Set

State: Liaoning, China http://www.zerogo.com.cn


Flow Meter Suppliers in India

S.N. Name of the

Suppliers Technical Specification Photograph Cost/price Contact Details

1

Cbro Incorporation

Model Number: GFM-250 Brand Name: CBRO

Size : ½” to 14” Accuracy : ± 1% of actual reading

Design Standard : BS - 1042/ISO : 5167

State: Maharastha Country: India

http://www.cbroindia.com Cont. person: Mr. Amol Chalke

Mbl:(91)-9321727262 phone:(+91)-8376807244

2

Flowtech Measuring

Instruments Pvt. Ltd

Model no: GTRM - 99 High & Low Flow switches

Measuring Rated flow of Liquid, Gases Brand Name: Flowtech

$100-120 / Piece

State: Gujarat Country: India

http://www.flowtechinstruments.com

Fax:91 - 265 - 2636795 Contact person: Nilesh Shah Phone:91 - 265 - 2636795

Model Number: EMFM - 089 Brand Name: FLOWTECH

High Accuracy flow metering Flow range 0.5 to 10 m/s

Output :4-20 ma Process Temp: + 150 degree max

Easy maintenance as no moving parts

$ 400-500 / Piece

Model Number: ABR-090 Line Size:15 NBto100 NB

suitable for water and biogas Accuracy: +/- 2% F.S.D

Rangebility: 10:1 Maximum Operating Temperature rating is 50 o C

$300 - 360 / Piece

http://www.flowtechinstruments.com/�

http://www.flowtechinstruments.com/�



FIN

AL

REP

OR

T

Model Number: BPR-99 Brand Name: Flowtech Detachable flow scales

Scale length of 180-200 mm

$150 ‐ 360 / Piece

Model Number: EMFM-0257 Brand Name: FLOWTECH Min. conductivity : 5 us/cm

Lining : PTFE / Rubber / PP Flow range 0.5 to 10 m/s

No pressure drops in process

$400 - 500 / Piece



FIN

AL

REP

OR

T

Annex 3: List of Pressure Meter Suppliers Pressure Meter Suppliers in China and India

S.N. Name of The Suppliers Technical Specification Photograph Cost/Price Contact Details

1. Shenzhen Puxin Technology Co., Ltd

Model Number: 16KPa PRESSURE: 0~16KPa

Brand Name: Puxin High corrosion resistance

Easy to install

$ 3-4 / Piece

State: Guandong Country: China

Web: http://www.puxintech.com Fax:86-755-89323983


2.

Shanghai Cixi Instrument Co., Ltd

Model Number: A Outer diameter: 60,100,150

Relative humidity: not more than 90% working location: Vertically installed

Operating Temperature: 70 Celsius degree Accuracy: 2.5%

$ 40 - 200 / Piece

Tel:86-21-5763 2436 Fax:86-21-5763 4942

State: shanghai Contact person’s. Agnes Peng http://www.gnflowmeter.com

3. Qingdao DaZeFengYang

Trading Co., Ltd

Model Number: Y-60H Brand Name: DZFY

Accuracy: ±2.5% size: 4.0"(100mm),60"(150mm)

Pressure range: 0~0.1 Window: Glass or plastics

$3 - 8 / Piece


http://www.qddzfy.com Fax:86-532-55578785

Contact person: Mr. Victor Wang Tel:86-532-55578785

4.

Wuhan Acme Agro-Tech Co., Ltd

Model Number: AM-YL05 Brand Name: ACME

Accuracy: high accuracy Cost: low cost

Pressure: 0-16KPa

$1 - 5 / Set

State: Hubei Country: China

http://www.acmeagro.org Fax:86-27-83315893 Tel:86-13277936540


5.

Rigchina Group Company

Model Number: RC-50 Brand Name: RIGCHINA

Gauge: durable

$1 - 10 / Piece


http://www.rigchina.com FAX: 0086-579-87537696 TEL: 0086-579-87537698 Mail:[email protected]

6 Qingdao DaZeFengYang

Trading Co., Ltd

Model Number: Y-100 Accuracy class: 1.6%

Size: 63mm Operating temperature:

-40°F to 140°F (-40°C to 60°C warranty: 1 year

$4 - 10 / Piece


http://www.qddzfy.com Fax:86-532-55578785


http://rigchina.en.alibaba.com/company_profile.html#top-nav-bar�

http://www.rigchina.com/�



FIN

AL

REP

OR

T

7.

Shaanxi Yuke Test & Control Technology Co., Ltd

Accuracy: 0.5%FS overload pressure: 150%FS Load capacity: <24V,1.2A

Output: 4~20mA

$2 - 200 / Piece

State: Shaanxi Country: China

http://www.yksensor.com Fax:86-29-88644945 Mbl:86-13363997735

Contact person: Ms. luna li

8 Yantai Chemins Instrument Co.,

Ltd

Model Number: GL-4 Diameter: 100/150mm

Pressure range: 0-1.6; 0-2.5; 0-4.0; 0-6.0; 0-10; 0-16; 0-25;

0-40; 0-60Mpa Accuracy: ± 1.6%

Temperature: -25°C~55°C

$10 - 1,000/Piece


http://www.chemins-tech.com Fax:0086-535-2945018 Tel:0086-535-8381357


9

Wuhan Acme Agro-Tech Co., Ltd

Model Number: AM-YL06 Brand Name: ACME

Lifespan: durable Pressure: 0-18KPa Installation: easy

Weight: very light weight Cost: low cost

$ 2-5 / Set

State: Hubei Country: China

http://www.acmeagro.org Fax:86-27-83315893 Tel:86-13277936540

Contact person:Ms. Siyo Tang

10.

Anhui Fenghuo Renewable Energy Co., Ltd

Model Number: FH- PG- 16KG Brand Name: FENGHUO Pressure range: 0-16kpa

Type: biogas/gas HS CODE: 90262090

The weight is 8kg/100sets High corrosion resistance

Easy to install

State: Anhui, China http://www.fenghuo.org

Fax:0086-551-64266997 Tel:0086-551-64266997

Mail:[email protected]

11.

Qingdao DaZeFengYang Trading Co., Ltd

Model Number: YTP-150MF Brand Name: DZFY Accuracy: 2.5,1.6

Measuring range: 0~0.1~10MPa Warranty: one year

Dial size:60,100,150mm

$6-60 / Piece

State: Shandong, China http://www.qddzfy.com Fax:86-532-55578785


12 Yantai Chemins Instrument Co.,

Ltd

Model Number: LG190H Power supply: ≤2.0mADC

Output impedance: 3.5kΩ~6kΩ Pressure range: 0~20 K Pa, 35MPa

Response(10%~90%): <1ms

$10-1000 / Piece

State: Shandong, China http://www.chemins-tech.com

Fax:0086-535-2945018 Tel:0086-535-8381357


13 Shenzhen Puxin

Technology Co., Ltd

Model Number: 16 Kpa Brand Name: PUXIN pressure: 0~16Kpa

$3-30 / Set

State: Guangdong, China http://www.puxintech.com

Fax:86-755-89323983

http://www.chemins-tech.com/�




FIN

AL

REP

OR

T

Durable, Easy to install HS CODE: 90262090


14

Yantai Chemins Instrument Co., Ltd

Model Number: HZ-100 LCD digital display: 5 digit

Temperature: -10~+60 Pressure range:

0-600Kpa; 0-1Mpa; 0-1.6Mpa; Accuracy:0.2%FS;0.4%FS;0.5%FS;1%FS

$10-1000 / Piece


Fax:0086-535-2945018 Tel:0086-535-8381357


15

Yantai Chemins Instrument Co., Ltd

Model Number: YH2088 Power voltage: 15~36VDC, 24VDC

Accuracy: 0.1%F.S 0.25%F.S.,0.5%F.S Output signals: 4~20mA, 0~10mA

current limit protection

$10-1000 / Piece


Fax:0086-535-2945018 Tel:0086-535-8381357


16

Cixi City Baite Pressure Gauge Co., Ltd

Model Number: Y Brand Name: Baite

Pressure range:: to 36,000 psi Accuracy::

±0.02%FS, ±0.05%FS, ± 0.1%FS High quality

Dimension: 130mm×94mm×40mm

$2 - 10 / Piece

State: Cixi City, China http://www.baiteyb.com Fax：86-574-63306285 Tel：86-574-63306905

E-mail：[email protected]

17

Shenzhen Xin Heng Tong Electronics Co., Ltd.

Model Number: BPZ2005 Measurement Range: -0.1~0~100MPa

Connection Interface: N1/4~18NPT Working Temperature: -1℃~49℃

Net Weight: 0.4KG 4 digits digital display

$93 - 100 / Piece

State: Guangdong, China http://www.saiton-sensor.com

Fax: 86-0755-83158852 Telephone: 86-0755-83165394

Contact Person: Ms . Kayla

18

Shaanxi Yuke Test & Control Technology Co., Ltd

Model Number: YK3000HLT pressure ranges: 0-42MPa

Accuracy: 0.1%FS , 0.2%FS, 0.5%FS long term stability: <0.2%FS/year

system pressure: 40bar/100bar/250bar/320bar

Media temp. range: -40~+120°c

$2 - 100 /

Piece

State: Shaanxi, China http://www.yksensor.com

Fax:86-29-88644945 Mbl:86-13363997735

Contact person:Ms. luna li

19

Shanghai Liyin Mechanical And Electrical Technology Co., Ltd

Brand Name: Liyin Accuracy:1.

Ranges:-1 to 600bar Dial size:100,150mm

Explosion-proof class: Exib II

$3.3-59 / Pieces

State: Shanghai, China http://shliyin.en.alibaba.com/

Tel:086-021-52163085 Mbl:13601791935

Contact person: Mr. liqin kuang




http://www.saiton-sensor.com/�



FIN

AL

REP

OR

T

20 Qingdao Hakin Group Co., Ltd

Model Number: Y series warranty:: 1 year

Size: From 1.5" to 6" Accuracy: 3-2-3%,2.5%,1.6%,1%

Range:-1~1000 bar Window: Glass or Safety Glass

$3.3-59 / Pieces

State: Shandong, China http://en.hakin.com/meter.html

Fax:86-532-85928599 Tel:86-532-85921858

Contact person: Mr. Frank Zhang Mobile:13553089896

21

Xi'an Qinfeng Instrument Co., Ltd

Model Number: YB-254 Brand Name: QF XY

Accuracy: 0.25% Dia: 250mm

Range: 0~0.4Mpa ; 0~0.6Mpa ; 0~1.0Mpa

$50 - 200 /

Unit

State: Shaanxi, China http://xaqf.en.alibaba.com

Fax:86-29-81327337 Tel:86-29-81327582

Contact person: Mr. Wei Chen

22

Yuyao Shunhuan Instruments Co., Ltd

Model Number: LZY Brand Name: shunhuan

Accuracy: ±2.5% Shock resistant

Measure Range::0~15Psi...0~8500Psi

$1.25-

12.65/set

State: Zhejiang, China http://yuyaoshunhuan.preview.ali

baba.com/ Fax:86-574-62663063 Tel:86-574-62633258

Contact person: Ms. Sally Zhang

23

Yueqing Fengxing Electric Factory

Model Number: Y-100 Brand Name: FX

Scale diameter: 100mm Range: 0-1.6Mpa

$2-8 / Piece

State: Zhejiang, China http://cnflin.en.alibaba.com

Fax:86-577-27878016 Tel:86-577-27878016

Contact person: Mr. Bob Pan

24 Along(HK) Environtech Limited

Range detectable:0~30kpa Material: stainless steel

www.alongenvirontech.com Country: Honking Tel:852-27837818

Contact person: Mr. Kevin Guo

25 Shree Mahavir Industries

Brand Name: air master Place of Origin: Gujarat India

State: Gujarat ,India Fax:+91 288 3984100

Contact Person : Mr. Dhiren Shah

Phone : +91 22 26878240

http://en.hakin.com/meter.html�

http://yuyaoshunhuan.preview.alibaba.com/�

http://yuyaoshunhuan.preview.alibaba.com/�



FIN

AL

REP

OR

T

Annex 4: List of Biogas Desulfurizer Suppliers

Biogas Desulfurizer Suppliers in China SN Name of the Suppliers Price/ Cost Technical specification Photograph Contact Address

1 Shenzhen Puxin Technology Co., Ltd $1,00 / Set

Model Number: PX-250L Application: Biogas H2S removing

Porosity: 50 - 60% Ferric Oxide content: 25% - 33%

H2S removal rate > 99% Simple and quick installation


Fax:86-755-89323983 Mbl:13425127057 Contact person: Mr. Vane Yen

2 Shenzhen Puxin Technology Co., Ltd

Model Number: PX-250L Desulfurization for medium and small size plant

Desulfurizer filling: 250KGS once Easy installation


Fax:86-755-89323983 Mbl:13425127057

Contact person: Mr. Vane Yen

3 Wuhan Acme Agro-Tech Co., Ltd $8 - 15 / Set

Model Number: AM-TKA1 Inlet Diameter: 10mm, 16mm

G.W.: 2.4kg long use lifespan Very good quality

good cleaning effect

State: Hubei, China http://www.acmeagro.org

Fax:86-27-83315893 Tel:86-13277936540


4 Camda New Energy Equipment Co., Ltd

$3000‐8000 / Unit

Model Number: KDCL-100-WQ Main Desulfurizer: iron trioxide Working pressure: 4~40KPa

Gas flow 40~300Nm3/hr

State: Guangdong, China www.camdagenerator.com

E-mail: [email protected] Fax: +86-769-88996200 Tel: +86-769-88996268

5 Shenzhen Sunrise Econergy Co., Ltd $1800 /Set

Model Number: SR100 Methane Content (%): 60%

Nitrogen Content (%): 0 Sulphur Content (%): 0

Service life: more than 30 years

State: Guangdong, China http://www.bio-eco.co

Fax:86-0755-84559112 Tel:86-0755-84559112

Contact Person: Mr. Alex Pan

http://www.camdagenerator.com/�

http://www.camda.cc/�



FIN

AL

REP

OR

T

6 Shenzhen Puxin Technology Co., Ltd $5 - 15 / Set

Model Number: PX-1L Meet the flow rate =5m3/day

Must using indoor, Made by plastic Can treat 200m3 biogas

Color: green

State: Guangdong, China Fax:86-755-89323983


7 Chongqing Biogas New Energy Co., Ltd $850-9,850/Set

Model Number: BNE0100 Methane Content (%): 70% Nitrogen Content (%): 0.1% Sulphur Content (%): 0.01% life span: more than 10 years

loading capacity: 30kpa

State: Chongqing, China http://www.bnegas.com

Fax:0086-023-62571546 Tel:0086-023-62571546

Contact person: Mr. Ervin Wen

8 Gongyi City Xianke Water Supply Material Co., Ltd

$480 - 550 / Metric Ton

Model Number: Xk-10X Size: 4.5-5.5

Application: remove of h2s Advantage: high quality and best price

Desulfurization precision ppm:≤0.1

State: Henan, China www.activatedcarbonxk.com

Fax:86-371-64566326 Tel:86-371-64566316

Contact person:Ms. Helen He

9 Wuhan Acme Agro-Tech Co., Ltd

$500 - 10,000 / Unit

Brand Name: ACME Methane Content (%): 70 Nitrogen Content (%): 5 Sulphur Content (%): 1

Remove H2S by using Desulfurizer High efficient of H2S removal

Long lifespan

State: Hubei, China http://www.acmeagro.org

Fax:86-27-83315893 Tel:86-13277936540


10 Tianjin Yuanlong Chemical Industry Co.Ltd $480 - 860 / Ton

Model Number: MT-502 Application: H2S removal

Size:: 4.5-5.5 Can be regeneration

High efficient to remove H2S

State: Tianjin, China www.yuanlongchem.com Fax:0086-22-23523959

Mail:[email protected] Tel:0086-22-23528561

11 Nanjing Yuant Environmental Engineering Co., Ltd $500-3000 / Set Place of Origin: Jiangsu China

Brand Name: Yuant

State: Jiangsu, China http://www.njydhb.com Email:[email protected]

Ph:15996218571

http://www.activatedcarbonxk.com/�

http://www.yuanlongchem.com/�




FIN

AL

REP

OR

T

12

Anhui Fenghuo Renewable Energy Co., Ltd

Model Number: FH-BF-002 Outlet Diameter: 8-10mm Brand Name: FENGHUO Can treat 200m3 biogas

Meet the flow rate =5m3/day

State: Anhui, China http://www.fenghuo.org Fax:0086-551-64266997 Tel:0086-551-64266997 Mail:[email protected]

13 Gaoyi Sunpower Chemical Co., Ltd. $450 - 1,050 / Ton

Model Number: SP-003 Stable quality

Usage: nature gas, coke oven gas, biogas Applicable to the removal of H2S from biogas

Purity: 100%

http://www.zno-cn.com State: Heilongjiang, China

Fax:86-311-66699528 Email:[email protected]

Tel: 86-311-66699518

14 Shenzhen Puxin Technology Co., Ltd $3-850 / Piece

Model Number: NY/ZS324-2001 Brand Name: Puxin

Family size desulphurizer Net weight: 100 kg

Can treat 2000m3 biogas


Fax:86-755-89323983 Mbl:13425127057

Contact person: Mr. Vane Yen




FIN

AL

REP

OR

T

Annex-5 List of Control Panel Suppliers

SN Name of the Suppliers Technical Specification Photograph Cost/Price Contact Details

1

Chongqing Runchi

Technology Co., Ltd

Model Number: GTR-17,high quality , Three keypads to operate system procedure, Systems status display by LED ,Dimension:

W 72 * H 72 * D 58 mm

$1-300 / Piece

Fax:86-023-68249519,Tel:86-023-68249519,Contact person: Mr. Jerry Tang

,Mbl:13667643016,State:Chongqing,china,Web: http://kangms18.cn.alibaba.com/

2

Dongguan Feirui

Electronics Co., Ltd

Model Number: DSE501K ,Certificate: ISO9001 ,Power Supply: 9 to 33 Vdc

Continuous ,Guarantee: 365 days ,Alternator Input Range: 15 - 305 V AC

RMS

$55-65 / Piece

Fax:86-769-23166296,Tel:86-769-23836636,Contact person:Ms. Holly Liao,Mbl:86-

13532612206,State:Guangdong,China,Web: http://dgfeirui.en.alibaba.com

3 Ningde Kada Power Co., Ltd

Brand Name: KADA, Model Number: DSE5220 ,micro-processor based design

,Automatic shutdown on fau,Automatic engine starting and stopping Remote control

and monitoring, Warranty Period: 1 year

$10 - 30 / Piece Operational Address: Room 401, No. 21,

Xianfeng Building, Chengdong Road, Ningde, Fujian, China ,Web: http://www.kadapower.com

4

Yueqing Hecheng

Electrical Co., Ltd

Model Number: DSE5130 ,start delay contro,Gross Weight 1kg,P/N 5130, Brand

Name: Deep sea ,Parking / Idle Speed Control, remote automatic start / shutdown

$10-100 / Piece Fax:86-577-56667563,Tel:86-577-

80221899,Contact person: Mr. David Zheng ,Mbl:18657770175,Web: http://www.jeenda.com

5

Shenzhen Graigar


Brand Name: Graigar Model Number: GTR168,Power Consumption: 5

W,Application: All Genset,Engine Protection (O.S./ L.O.P. / H.W.T. / O.C./ EMS./ L. Batt.)

$1-200 / Piece Fax:86-755-27541660,Tel:86-755-

27541660,Contact person: Mr. Leo Lee ,Mbl:15967476818,Web: http://www.graigar.cn

http://cqrunchi.en.alibaba.com/company_profile.html#top-nav-bar�




http://dgfeirui.en.alibaba.com/company_profile.html#top-nav-bar�




http://kadapower.en.alibaba.com/company_profile.html#top-nav-bar�

http://kadapower.en.alibaba.com/company_profile.html#top-nav-bar�

http://jeenda.en.alibaba.com/company_profile.html#top-nav-bar�




http://graigar.en.alibaba.com/company_profile.html#top-nav-bar�






FIN

AL

REP

OR

T

6

Dongguan Huxin

Electronics Co., Ltd.

Brand Name: Huxin Model Number: DSE703 generator control panel ,in put:

AC75 - 277V , size: 150x110mm , frequency: 50 - 60Hz ,Remote start

,Automatic shutdown when fault conditions are detected

$1-2 / Piece

Fax:86-0769-85269552,Tel:86-0769-33287995,Contact person:Ms. Anna Wen

,Mbl:86 15814253875,Web: http://www.huxindg.com

7 Fujian Baina Trade Co., Ltd.

Brand Name: compa, DSE ,CE and ISO9000,Operating Temperature Range: -30

to 70 degree,Charge Fail / Excitation Range:0 V to 35 V

$40-90 / Piece Tel:0086-591-28315566,Contact person:Ms.

Sheng Lin,Province/State: Fujian,web: http://www.y-alu.com

8

Chongqing Boce


Brand Name: BOCE Model Number: 168 Gross Weight:: 0.25kg Package Size::

75mm*75mm*75mm Panel Cut-Out(W*H):: 68mm*68mm

DC Supply:: DC 8 - 36 V Start Mode:l: Auto & Manual Color:: black,small size,

lower price

$1-45 / Piece

Fax:86-23-68693061,Tel:86-23-68697623,Contact person:Ms. Trudy Tu

,Mbl:13983604406,State:Chongqing,China,Web: http://www.cqboce.com.cn

9

Fuzhou W.D Power

Industrial Co., Ltd.

Model Number: WDPG-C, Output Type: AC Three Phase,Speed:

1500RPM / 1800RPM,Frequency: 50HZ / 60Hz,Warranty: 1000 hours or one year ,Certificate:ISO9001, ISO14001, CE, BV,

Noise: 65dB at 7M ,

$222-999 / Set

Fax:0086-591-83258951,Tel:0086-591-83259782,Contact person:Mr. Kevin Huang

,state:Fujian,China,Web: http://www.wd-power.com

http://huxin.en.alibaba.com/company_profile.html#top-nav-bar�




http://zsdalum.en.alibaba.com/company_profile.html#top-nav-bar�

http://zsdalum.en.alibaba.com/company_profile.html#top-nav-bar�

http://cqboce.en.alibaba.com/company_profile.html#top-nav-bar�




http://chinawending.en.alibaba.com/company_profile.html#top-nav-bar�






FIN

AL

REP

OR

T

10 Fuan Kaiyue

Electronic Co., Ltd.

Model Number: DSE501K , Brand Name: Populace ,Warrenty:one year warranty, ,Size: 7.5*12.5*6.5CM Packing: carton

,Operating Temperature Range:-30 to +70°C,Alternator Input Range:15 - 305 V AC

RMS

$20-40 / Piece

Fax:86-593-6616132,Tel:86-593-6616132,Contact person:Ms. Grace

Chan,Mbl:13850383550,State:Fujian,China,Web: http://www.genpart.cn

11

Chongqing Boce


Model Number: 6110,Display: LED&LCD Power Range: above 10kw , Warranty:

1year ,Brand Name: BOCE,Mounting-hole Size: 220mm*160mm

$1-130 / Piece

Fax:86-23-68693061,Tel:86-23-68697623,Contact person:Ms. Ms. Trudy Tu

,Mbl:13983604406,State:Chongqing,China,Web: http://www.cqboce.com.cn

12 Fuan Parbeau

Electronics Co., Ltd.

Model Number: GTR-168 , Brand Name: Parbeau ,DC Supply: DC 8 - 36 V ,.1 year warranty ,Auxiliary shutdown protection: 1

Sec,N.C,Auto Start function by detected ATS terminal l2.,Manual start engine

$70-85 / Piece

Fax:86-593-6305076,Tel:86-593-6116677,Contact person:Ms. Ivy Wu

,Mbl:13055575681,State:Fujian,China:,Web: http://parbeau.com

http://populaces.en.alibaba.com/company_profile.html#top-nav-bar�







http://parbeau.en.alibaba.com/company_profile.html#top-nav-bar�



Annex-6 Checklist for Market Analysis on Electricity Generation Technologies from Biogas

Name of the Supplier: ……………................................................................ General information

Owner's name: ……………………………Mobile No. ……………………..Contact Tel: …………………… Contact Person: …………………………..Email Address: ……………………………………………………. Address:……………………………………Country: …………………………………………………………….

Information on Engine-generator sets/Appliances

1. Which type and capacity of generators and equipment’s are available in the market?

Name Capacity/Brand/Model Price Fuel

System After sales services(Y/N)

Warranty Period Remarks

Generator

Flow Meter

Pressure Meter

Desulfurizer & Dehydrator (H2S Removal Units)

Other 1

(Specify)

Other 2 (Specify)

2. Are you an authorized supplier/dealer?

1) Yes 2) No If yes, then which company? …………………………..

3. In your opinion, market of generator/electro-mechanical parts for biogas electrification is 1) Increasing highly 2) increasing slowly 3) decreasing sharply 4) decreasing slowly 5) constant

4. Have you ever experienced a shortage of generator?

1) Yes 2) no If yes then, around which capacity………….

5. In which region/area the sales of the generator higher? _______________________

6. How do you manage to sell the generators/appliances to the customers? 1) From the stock 2) Order them from the company as per need



FIN

AL

REP

OR

T

7. Do you give delivery service for the customer? 1) Yes 2) No If yes do you charge for the delivery? 1) Yes 2) No

8. What is the delivery charge? __________________

9. Are you facing any problems for the delivery? ………………………………………………

10. Do you give maintenance service for the customer?

1) Yes 2) No

11. Can you provide consistently high service level that meets our expectation? 1) Yes 2) No

12. What are the safety tips before operating this generators/ appliances?

13. Does it require expertise to install those equipment’s/ components? 1) Yes 2) No

14. Are those equipment’s/ appliances are portable?

1) Yes 2) No

15. List of spare parts suppliers at local market

16. Repair and Maintenance Service Providers at local market

Observation



FIN

AL

REP

OR

T

Jenbacher Type 4 (844 - 1562 kW) Based on the proven design concepts of GE's Jenbacher Type 3 and Type 6 engines, Type 4 gas engines are characterized by high power density and outstanding efficiency in the 800 to 1,500 kW power range. Optimized control and monitoring provide easy maintenance capabilities, as well as maximum reliability and availability. Features & Benefits

• Type 4 offers the highest efficiency in its power class • High-tech components maximize reliability • LEANOX® lean burn control ensures minimal emissions • Modern engine concept increases service-friendliness • High-power turbocharger allows optimal operation at higher air intake temperature and

altitude

Application GE’s Jenbacher Type 4 gas engines can be designed as generator sets, cogeneration systems, or as a container. Depending on customer specifications, a variety of gas types can be used to increase overall efficiency levels, reduce industrial emissions, and optimize the integration of all available engine-related heat sources.

• Applicable heat sources include engine cooling water, oil, mixture gas, and exhaust gas. • Customers can dispose of environmental pollutants from landfills, agriculture, chemical,

and mining sites, while using the gases for power generation simultaneously. • Applicable gas types include: natural gas, associated petroleum gas (flare gas),

propane, biogas, sewage gas, landfill gas, coal mine gas, and other special gases (e.g., coke, wood, and pyrolysis gases).



FIN

AL

REP

OR

T

Few Photographs

Photo 3: Electrification from biogas in India

(Photo Source: Jeevan Shrestha, Biogas Expert)

Photo 4: A contact person of Shobhabhagawati Bio-electrification Project (Mr. Amir Bajracharaya)

(Photo Source: SETM, 2014)



FIN

AL

REP

OR

T

Process for Import goods (www.customs.gov.np) What are the procedures to import goods from India? Through • L/C • T.T • Draft • Local Purchase (Local Import What are the conditions to be fulfilled while importing the goods from India against the payments of convertible foreign currency? • Import should be done on L/C basis. • Import should be only from Indian procedure or firm/ company. • Only production oriented industrial firm and energy industry of the capacity up to 5 MW registered in Nepal is allowed to import. • Bill of Export must be at the time of import. • There must be number and date of ARE 1 from in Bi. Bi. Ni. form 4. • The goods are cleared from customs only in case of the number of ARE 1 mentioned in Bi. Bi. Ni. From 4 matches with the number of ARE 1 from came along with goods in the customs. What are the documents to be submitted in the customs while goods are to be imported from India against the payment of convertible foreign exchange? The documents are: • Declaration Form • LC/ T.T/ Draft • ARE 1 Form • Document of Insurance • Packing List • Bill of Export • Certificate of VAT Registration • Certificate of Registration of firm or company • Certificate of Industry Registration is case of Industry • In case of requirement of permission of certain institution for importation of particular goods, such permission of the concerned institution • TA and COP documents for the importation of vehicle • Bi. Bi. Ni. Form 4 • Appointment letter of customs agent in case of appointed agent What are the necessary documents on local import from India? The documents are: • Declaration Form • L/C in case of L/C opened in India currency • Invoice • Insurance Document • Packing List • Transportation Document • In case of L/C in Indian currency, Bi. Bi. Ni Form 4 (kha) issued by bank • Certificate of Registration of Firm or Company • Certificate of Registration of Industry in case of Industry • Certificate of VAT Registration • In case of requirement of permission of certain institution for importation of particular

http://www.customs.gov.np/�



FIN

AL

REP

OR

T

goods, such permission of the concerned institution • Appointment letter of customs Agent in case of appointed Agent What is the mode of payment regarding import of goods from Tibet the autonomous region of China? The modes of payment are: • L/C • Draft or convertible foreign currency payment as specified by Nepal Rastra Bank • Traditional Barter System • Nepalese resident within 30 km distance of the border are allowed to import the goods up to the amount of NRs.16000 without payments through banking system How much the maximum value of Drat or T.T can be used for the import at one time? The goods worth up to U.S $30000 can be imported at one time through Draft or T.T. Is any permission required for the import though Draft or T.T? There is no need of any permission of any institution while importing through Draft or T.T from Tibet but in case of import of third country goods via India through Draft or T.T permission of DoCSM is required.



FIN

AL

REP

OR

T

Commodity Classification

What is commodity classification? Commodity Classification is the grouping of similar goods which are countless and traded in world trade, on the basis of nature, use, quality, composition of the goods. . Which commodity classification has been adopted in Nepal? Nepal has adopted Harmonized commodity description and coding system (HS). It is the developed and adjusted form of Customs Cooperation Council Nomenclature (CCCN) and Standard International Trade Classification (SITC)

. When the HS system was started in Nepal? It was started since Fiscal Year 2049/50. This system has been updated as per revised. The recent version is 2012 which is going to be adjusted. What are the specialties of this system? The main specialties are:- • Uniformity and similar order in classification of the goods in international trade. • Established customs language at custom points. • Helps to conduct trade agreement • Uniformity in trade statistics • Facilitate comparison of international trade and data analysis.

What are its objectives? The objectives are:- • To simplify the imposition of duty on import/ export of goods. • Record real data of international trade. • Determine the country of origin of the goods. • Monitor the trade and control • Remove the trade barrier and facilitate trade.

Who are its users? Its users are: • Government • Traders • International Organization • Transport Agents • Importer and Exporters • Producers • Statisticians • Transporters • Authority of Port Operation What is the procedure of HS classification? The classification procedure is as follow:- • Search the description of goods from bills, agreement, and analysis report issued for the goods. • Conduct physical examination and laboratory test. • Verify technical description of goods. • Look the condition of presentation of the goods • Find the level of production - such as raw material, non worked, worked, semi finished, finished etc. • Identify the use and function of goods.



FIN

AL

REP

OR

T

What is the structure of HS System? There are 21 Sections, 97 Chapters, 1224 Headings and 5205 Sub-headings. While classifying the goods, the sub-headings up to six digits are same to all countries .In this six digits sub-heading first two digits denotes chapters and second two digits denotes headings and the last two digits denotes the specific goods. In which aspect of Harmonic Code number, should the importer/ exporter should give attention? The importer/ exporter should mention detail description of goods and declare detail descriptions in declaration form. If Customs office demands additional description of goods or analysis report and technical specification for the proper classification it should submit to help the customs office.

Is there the provision of appeal in disagreement in classification? In case of disagreement the importer/ exporter can appeal against the decision of the customs to the Director General of the Department of Customs for reclassification through the same customs office. What is the basis of classification to be undertaken by the Director General of Customs? The basis are:- • Harmonized System of World Customs Organization • The suggestions of concerning expert or suggestions of national or international agencies.

What is the way out to release goods in case of confusion in classification? In such condition goods can be release according to the classification decision of the customs on deposit of chargeable duties and fees. After the final classification decision, the chargeable duty is deducted from the deposit furnished and then deposit is released.



FIN

AL

REP

OR

T



FIN

AL

REP

OR

T

file:///C:/Users/Owner/Downloads/hs%20207071(201314)engdoc2012%20version-22e39eaf890ffd3cafd345b51718ec81_2014-02-01-12-50-08.pdf



FIN

AL

REP

OR

T

An example products of Perfect Bio-Waste and Power Management Pvt Ltd.

S.N. URL Digester Feed Gas Type

Engine Capacity

Digester Capacity

1 http://www.youtube.com/watch?v=y9dtSPtXcZk&feature=em-upload_owner COW DUNG BIO-GAS 250 Kwh 2500 m3

2 http://www.youtube.com/watch?v=kDsYvPgiUuE&feature=em-upload_owner

POULTRY LITTER BIO-GAS 50 Kwh 310 m3

3 http://www.youtube.com/watch?v=l905W5Iz_es&feature=em-upload_owner

POULTRY LITTER BIO-GAS 50 Kwh 140 m3

4 https://www.youtube.com/watch?v=iXBNiL16Y1k COW DUNG BIO-GAS 10 Kwh 60 m3

5 https://www.youtube.com/watch?v=N3QSMHSkJMg RICE HUSK

BIO-MASS 50 Kwh NA

6 https://www.youtube.com/watch?v=x_qOMkeQ3_8 COW DUNG BIO-GAS 24 Kwh 85 m3

The details in hard copy is attached.

http://www.youtube.com/watch?v=y9dtSPtXcZk&feature=em-upload_owner�

http://www.youtube.com/watch?v=y9dtSPtXcZk&feature=em-upload_owner�

http://www.youtube.com/watch?v=kDsYvPgiUuE&feature=em-upload_owner�

http://www.youtube.com/watch?v=kDsYvPgiUuE&feature=em-upload_owner�

http://www.youtube.com/watch?v=l905W5Iz_es&feature=em-upload_owner�

http://www.youtube.com/watch?v=l905W5Iz_es&feature=em-upload_owner�

https://www.youtube.com/watch?v=iXBNiL16Y1k�

https://www.youtube.com/watch?v=iXBNiL16Y1k�

https://www.youtube.com/watch?v=N3QSMHSkJMg�

https://www.youtube.com/watch?v=N3QSMHSkJMg�

https://www.youtube.com/watch?v=x_qOMkeQ3_8�

https://www.youtube.com/watch?v=x_qOMkeQ3_8�

Documents

ON MARKET ANALYSIS ON ELECTRICITY GENERATION …setmnepal.org/images/downloads/1427693550market_analysis_on... · Technology Management Pvt. Ltd (SETM) has prepared this Draft Report