leading innovation

STANDARD TENSING SYSTEM

Springs tensing systemRope slackening contact included

Polígono Ind. de Pina de EbroSector C, p-9

50750 Pina de EbroEspaña (Spain)

info@dynatech-elevation.comwww.dynatech-elevation.com

(T) +34 976 165 860 (F) +34 976 165 964

Dynatech, Dynamics & Technology, S.L.

SPECIALISTS IN SAFETY COMPONENTS FOR LIFTS

STAR BIDIRECTIONAL OVERSPEED GOVERNOR FIXED ON/UNDER CAR

Tripping speed = 0,35 ÷ 2,72 m/s Rated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6 mmOverspeed switch. Remote tripping.UCM available. Fulfills EN 81-20/50

ON-BOARD GOVERNORS

ROLLER TENSING SYSTEM

Springs tensing systemRope slackening contact includedIdeal for installations with a reduced headroom and pit

QUASAR T-25BIDIRECTIONAL OVERSPEED GOVERNOR INTEGRATED WITHTHE SAFETY GEAR

Tripping speed = 0,3 ÷ 2,33 m/s Rated speed=< 2 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switchRemote trippingUCM availableFulfills EN 81-20/50

QUASAR SVBIDIRECTIONAL OVERSPEED GOVERNOR FIXED TO THE CAR

Tripping speed = 0,3 ÷ 2,7 m/s Rated speed=< 2,18 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switchRemote trippingUCM available. Fulfills EN 81-20/50

ECOELECTROMECHANICAL WEIGHING DEVICE

Silentblocks deformation measurement deviceFeeding: 12 - 32 V DC Overload relay: (NC or NO) Overload sound signal

WEIGHING DEVICES

SD-BOX PESSRAL UCM-CONTROLSAFETY DEVICE

SD-BOX detects any type of uncontrolled movement of the car (UCM) with the doors open.Power supply: • 24 VDC power supply. • Battery power supply. 12 VDC, 1,5 AhOutputs: • Safety line contact. • Control governor unlocking coil. 24 VDCFulfills EN 81-20/50 Safety category SIL 2

TENSING SYSTEMS FOR ON-BOARD GOVERNORS

UCM-ELECTRONIC DEVICES

EN 81-20 EN 81-50

It is assembled onto the T25 steering mechanism where, in turn, ASG progressive safety gear is installed

Products Range

STAR PLUSBIDIRECTIONAL OVERSPEED GOVERNOR ASSEMBLED ON/UNDER THE CAR

Tripping speed = 0,35 ÷ 2,72 m/s Rated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6 mmOverspeed switch. Remote tripping. Encoder (optional).UCM available. Fulfills EN 81-20/50

1027

10271027

1027

©

2017

/09

SPECIALISTS IN SAFETY COMPONENTS FOR LIFTS MORE INFO: www.dynatech-elevation.com

IN-3000 / IN-3000 G10INSTANTANEOUS SAFETY GEAR

For tripping speed 1 m/s:P+Q max. 8 mm Cold drawn guide rail = 2480 kgP+Q max. 9 mm Cold drawn guide rail = 2837 kgP+Q max. 9 mm Machined guide rail = 1855 kgP+Q max. 10 mm Cold drawn guide rail = 3364 kgGuide rail type: Cold drawn or machined and oiled or dry. FULFILLS EN 81-20/50

IN-6000INSTANTANEOUS SAFETY GEAR

For tripping speed 1 m/s:P+Q max. Cold-drawn guide rail= 6601 kgP+Q max. Machined guide rail= 5295 kgGuide rail type: Cold drawn or machined and oiled or dry.Admissible guide rail thickness: 16 mmFULFILLS EN 81-20/50

INSTANTANEOUS SAFETY GEARS

PQ-4000-UDBIDIRECTIONAL

Minimum P+Q = 2173 kg Maximum P+Q = 4023 kgMax. Trip. Speed = 2,5 m/sGuide rail type: Machined and oiled. Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50

PQ-3400-UDBIDIRECTIONAL

Minimum P+Q = 1107 kgMaximum P+Q = 3304 kgMax. Trip. Speed = 2,5 m/sGuide rail type: Machined and dry.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50

PR-2500-UD V.35BIDIRECTIONAL

Minimum P+Q = 613 kgMaximum P+Q = 1955 kgMax. Trip. Speed = 2,5 m/s Guide rail type: Cold drawn or machined and oiled.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50

PR-2000-UDBIDIRECTIONAL

Minimum P+Q = 537 kgMaximum P+Q = 1222 kgMax. Trip. Speed = 2,0 m/sGuide rail type: Cold drawn and oiled. Admissible guide rail thickness: 5 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50

PR-2500-UD V.50BIDIRECTIONAL

Minimum P+Q = 613 kgMaximum P+Q = 1955 kgMax. Trip. Speed = 2,5 m/s Guide rail type: Cold drawn or machined and oiled.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50

T-3 / T-2EXTENSIBLE DRIVING BAR

Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) T-3 Used with: PR-2500-UD V.50 PR-2000-UD PQ-3400-UD PQ-4000-UDT-2 Used with: PR-2500-UD V.35

PR-2500UNIDIRECTIONAL

Minimum P+Q = 741 kg Maximum P+Q = 1700 kg Max. Trip. Speed = 2,5 m/sGuide rail type: Cold drawn and oiled. Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN 81-20/50

T-1EXTENSIBLE DRIVING BAR

Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) Used with: Instantaneous PR-2500

PROGRESSIVE SAFETY GEARS

T-25 / T-25 UD T-25 XL / T-25 UD XLEXTENSIBLE DRIVING BARS

Distance between guides: from 600 to 3000 mm from 600 to 2100 mm*If it is needed other distance, contact us. Safety switch (optional).

ASG-100 UD ASG-120 UD ASG-121 UDASG-221 UDASG-65 UDBIDIRECTIONAL

Permissible massMinMax Max Tandem config.

Admissible guide rail thickness

Minimum gripping width

Maximum tripping speed

FULFILLS EN 81-20/50

Cold-drawn Machined Machined Machined Cold-drawn Oiled Oiled Dry Dry Oiled

515 kg 693 kg 598 kg 754 kg 790 kg 2139 kg 4233 kg 4019 kg 3284 kg 2214 kg 4278 kg 8466 kg 8038 kg 6568 kg 4428 kg

ASG-100 ASG-120 ASG-121ASG-221ASG-65UNIDIRECTIONAL

TENSION WEIGHT 200

Rope slackening contact included.  Rope Out Protection included.Protection plate included.      M14 forged clips included.    

TENSION WEIGHT 300

Rope slackening contact included.  Rope Out Protection included.Protection plate included.      M14 forged clips included.    

VEGABIDIRECTIONAL OVERSPEED GOVERNOR

Tripping speed = 0,4 ÷ 2,87 m/s Rated speed=< 2,4 m/sØ pulley = 200 mm Ø rope = 6mm/6,3mm/6,5mmHardened groove (optional). Remote reset and remote tripping mechanism by electrical acting (both optional).UCM available. Fulfills EN 81-20/50

VEGA PLUSBIDIRECTIONAL OVERSPEED GOVERNOR WITH ENCODER

Encoder (optional)Same features asVEGA

COMPACT TENSING PULLEY 200

Springs tensing pulley.Casting pulley. Rope tensioner: That will make rope re-tensioning easier if required.Rope slackening contact included.  Rope Out Protection included.

PROGRESSIVE SAFETY GEARS

PROGRESSIVE SAFETY GEARS WITH LATERAL DISPLACEMENT

OVERSPEED GOVERNORS

ASG-100 ASG-120 ASG-121 ASG-221 ASG-65 ASG-100 UD ASG-120 UD ASG-121 UD ASG-221 UD ASG-65 UD

7 to 16 mm

≥ 25 mm = 20 mm

2,33 m/s 3,9 m/s 2,33 m/s

QUASARBIDIRECTIONAL OVERSPEED GOVERNOR

Tripping speed = 0,3 ÷ 2,7 m/s Rated speed=< 2,18 m/sØ pulley = 120 mm Ø rope = 6 mm/6,5 mmHardened groove Overspeed switch Remote trippingUCM available. Fulfills EN 81-20/50

COMPACT TENSING PULLEY 126

Springs tensing pulley.Steel pulley. Rope tensioner: That will make rope re-tensioning easier if required.Rope slackening contact included.  Rope Out Protection included.

RENORENO FIXING KIT FOR NEW OR EXISTING FRAMES

Safety Gears: The entire range of PR, PQ and ASG progressive safety gears

Governors: Quasar T-25

EN 81-20 EN 81-50

EN 81-20 EN 81-50

1027

SPRI

NGS

TENS

ING

PULL

EYS

TENSING PULLEYS

TENS

ION

WEI

GHTS

VEGA HSBIDIRECTIONAL OVERSPEED GOVERNOR

Tripping speed = 2,87 ÷ 4,2 m/sRated speed =< 3,4 m/sØ pulley = 200mm Ø rope = 6mm/6,3mm/6,5mmHardened groove (optional).Remote reset and remote tripping mechanismby electrical acting (both optional).UCM available. Fulfills EN 81-20/50

VEGA 300BIDIRECTIONAL OVERSPEED GOVERNOR

Tripping speed = 0,6 ÷ 4,2 m/sRated speed =< 3,4 m/sØ pulley = 300mm Ø rope = 6mm / 6,5mmTest groove (optional).Hardened groove (optional).Remote reset and remote tripping mechanism byelectrical acting (both optional).UCM available. Fulfills EN 81-20/50

LBDs FAMILYBIDIRECTIONAL OVERSPEED GOVERNORS

Fulfills EN 81-1; EN 81-2More info: www.dynatech-elevation.com

LBD-200

LBD-300

FIXING KIT

LINKAGES

TANDEM CONFIG.

Used with: T-25 /T-25 UD T-2 & T-3 Safety switch (optional).

1027

10271027

1027 1027

1027

1027

1027

1027

10271027

1027

1027

1027