To Order, Call or Shop Online at omega.com SM 1

U Operates up to 140C (284F)U Submersible (IP68)U User Replaceable BatteryU Rugged U Programmable Start TimeU Software Battery Life IndicatorU Flush Mount (OM-CP-PR140) or 18 NPT

Pressure Port (OM-CP-PR140-NPT)

OM-CP-PR140

High Temperature Pressure Data LoggerPart of the NOMAD Family

OM-CP-PR140 data logger and OM-CP-IFC400 docking station shown larger than actual size.

Optional

The OM-CP-PR140 is a pressure data logger designed for use in autoclave validation and mapping. This rugged device can withstand temperatures up to 140C (284F) and is completely submersible (IP68). The OM-CP-PR140 is built with a precision stainless steel pressure gauge. The device has an accuracy of 0.03 Bar (0.435 psi), which can be achieved over a wide temperature range, from 20 to 140C (68 to 284F). The OM-CP-PR140 can be programmed to take readings as often as once per second (1 Hz), and has non-volatile memory that can store up to 32,700 measurements. The OM-CP-PR140-LUERFITTING is a 18 NPT to female luer lock adaptor. It can be used with the OM-CP-PR140-NPT data logger. The OM-CP-PR140-LUERFITTING can easily be screwed into the 18 NPT female port on the data logger. This rugged adaptor is made of 316 stainless steel construction and can withstand harsh environments such as steam sterilization cycles.The OM-CP-IFC406 multiplexer data logger interface allows for multiple devices to be connected into one interface. Each OM-CP-IFC406 allows for 6 data loggers to be connected. Up to 3 OM-CP-IFC406 units may be daisy-chained together to communicate with a total of 18 devices through 1 USB port. To connect multiple OM-CP-IFC406 interfaces together, simply join the units side by side, making sure the spring pin contacts are connected and magnetically joined.Simply place the OM-CP-PR140 in the OM-CP-IFC400 docking station or OM-CP-IFC406 multiplexer, connect to an available USB port on your computer, and the device can be started, stopped or downloaded using our user friendly software. Graphical, tabular and summary data is provided for analysis and can be viewed in psia, mmHg, bar, Torr and kPa. The data can also be automatically exported to Excel for further calculations. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged.

OM-CP-PR140-NPT shown larger than actual size.

OM-CP-PR140-LUERFITTING, 18 NPT to female luer lock adaptor (optional). Shown larger than actual size.

OM-CP-IFC406 multiplexer data logger interface, shown smaller than actual size.

To Order, Call or Shop Online at omega.com SM2

To Order Model No. Description OM-CP-PR140 High temperature pressure data logger, flush mount OM-CP-PR140-CERT High temperature pressure data logger, flush mount, and NIST calibration certificate OM-CP-PR140-NPT High temperature pressure data logger (18 NPT pressure port) OM-CP-PR140-NPT-CERT High temperature pressure data logger (18 NPT pressure port) and NIST calibration certificate OM-CP-PR140-LUERFITTING 18 NPT to female luer lock adaptor OM-CP-IFC400 Docking station (for single data logger) with USB cable, software and manual OM-CP-IFC406 Multiplexer data logger interface (accepts up to 6 data loggers) with USB cable, software and manual OM-CP-BAT110 Replacement 3.6V high temperature lithium batteryComes complete with 3.6V lithium battery. Operators manual and USB interface cable are included with the OM-CP-IFC400 software/cable package (required for data logger operation, sold separately). Ordering Example: OM-CP-PR140-CERT, high temperature pressure data logger (flush mount) with NIST calibration certificate.

SpecificationsOM-CP-PR140 Data LoggerPressure Sensor: Semiconductor strain gaugePressure Range: 0 to 5 bar (0 to 72.5 psia)Pressure Resolution: 0.1 mBar (0.0015 psia)Calibrated Accuracy: 0.03 bar (0.435 psi) (20 to 140C/68 to 284F)Pressure Response Time: 0.1 ms (10 to 90% FSR)Repeatability: 0.5% FSR; 0.2% typicalReading Rate: 1 second to 1 every 24 hoursMemory: 32,700 readings; software configurable memory wrapStart Modes: Software programmable immediate start or delay start up to six months Real Time Recording: May be used with PC to monitor and record data in real timeCalibration: Digital calibration through softwareCalibration Interval: Monthly calibration recommendedData Format: psia, bar, mbar, atm, Torr, Pa, kPa, MPa, mmHg, inHg, inH20, mH20, foot, meterBattery Type: 3.6V lithium battery included; user replaceableBattery Life: 2 years typical

OM-CP-IFC400, Windows software displays data in graphical or tabular format.

Time Accuracy: 1 minute/month at 20CComputer Interface: USB (OM-CP-IFC400 interface cable required); 125,000 baudSoftware: XP SP3/Vista/7 and 8 (32- and 64-bit)Operating Environment: -20 to 140C (-4 to 284F) 0 to 100% RH, may be used above 60C (140F) for up to 8 hrs per 24 hr periodDimensions: OM-CP-PR140: 50.8 L x 25.4 mm dia. (2.0 x 1.0")

OM-CP-PR140-NPT: 58.2 L x 25.4 mm dia. (2.3 x 1.0")Weight: 85 g (3 oz)Enclosure: Stainless SteelOM-CP-IFC406 MultiplexerOperating Environment: 10 to 35C (50 to 95F); 0 to 95% RH non-condensingBaud Rate: 125,000 baudConnection Type: USB (to PC)Weight: 750 g (1.65 lb)Material: 6061 Aluminum (PTFE impregnated hard anodize coating), ABS plasticEnclosure Dimensions: 24.13 L x 4.95 W x 4.45 cm H (9.5 x 1.95 x 1.75")Maximum Input Voltage: 6V

OM-CP-PR140-NPT shown larger than actual size.