Embed Size (px)
Citation preview
belfuse.com/cinch
Omega Catalog
About Bel
Bel is a publicly traded company that has been operated by the same family for over 65 years. Our history of organic
growth and acquisitions have broadened our product portfolio. This has established Bel as a world leader with a diverse
offering of power, protection and interconnect products. We design and manufacture these products which are
primarily used in the networking, telecommunications, computing, military, aerospace, transportation and broadcasting
industries. Bel’s portfolio of products also finds application in the automotive, medical and consumer electronics markets.
About Omega
The Omega product series consists of a family of connectors qualified to the MIL-C-26500 general purpose specification.
The Omega line has been expanded to also include many qualified products to numerous Boeing BACC45/BACC63
connector specifications. Utilizing the MIL-C-26500 mating interface, Cinch has also designed a high performance series
of connectors with attributes for shielding, environmental sealing, fluid resistance, and vibration - namely our CN0966/
CN0967/CN1020/CN1021/CN0909 connectors.
Our CN0942/CN0944 fixed contact receptacle connectors are designed specifically for custom board mount, flex circuit,
and soldered wire applications. These CN series of connectors are designed to meet all electrical and mechanical
requirements of the MIL-C-26500 military specification.
Table of Contents
MIL-C-26500 C48 SeriesIntroduction 3
C48 Series ConnectorsOrdering Information 4
Inserts Arrangement 5
Plug Connectors 6
Receptacle Connectors 7
CN0915, C48 Series ConnectorsLimited Wiring Space Receptacle Connectors, Crimp Removal Tool 9
CN0942/CN0944, C48 Series ConnectorsShort Receptacle Connectors, Non-Removable Contacts 11
CN0942 Series: Fluorosilicone Inserts 12
CN0944 Series: Fluorosilicone Inserts 13
C48 Series AccessoriesCable Support Assembly 14
Contacts 15
CN0966 SeriesSelf-Locking Plugs 16
CN0967 SeriesVibration-Resistant Receptacle 17
CN1020 SeriesVibration-Resistant Plug Connector 18
CN1021 SeriesVibration-Resistant Plug Receptacle 19
CN909A MMB SeriesVibration-Resistant Plug Connector 20
C48 Series & C48 FamilyMounting Panel Data 21
3
The C48 Series describes a family of connectors qualified to MIL-C-26500. While maintaining the MIL-C-26500 mating interface, this product has also been expanded to include qualifications to numerous Boeing specifications to satisfy general purpose requirements and unique product challenges for shielding, environmental sealing, fluid resistance, and vibration. The expanded Cinch C48 product family offers numerous product options qualified to Boeing high-performance requirements and product solutions developed for alternate termination styles/low-profile packaging.
• Qualified to MIL-C-26500
• Styles qualified to Boeing BACC45 Series
• Styles qualified to Boeing BACC63 Series
• Power contact sizes: 20, 16, and 12
• Coax contacts available: size 12 and 8
• Contacts: crimp - front release
• Optional fixed contacts: PC termination
• Coupling styles: bayonet and threaded
• Environmentally sealed
MaterialsShell Aluminum, stainless-steel options available
Finish Aluminum - anodize, optional electroless nickel / cadmium over nickel
Rubber Silicone / fluorosilicone
Dielectric Glass-filled epoxy
EnvironmentalTemperature Extremes +200ºC / 392ºF to -55ºC / -65ºF
Ozone Resistance 0.015% by volume
Temperature Life Internal 238ºC for 1,000 hours
Moisture Resistance 1,000 megohms minimum / MIL-STD-202, Method 106
Thermal Shock -55ºC (-67ºC) to 260ºC (500ºF)
ElectricalDielectric Strength 1,500 volts VAC RMS
Current Rating (Test) Size 20 7.5 Amps D.C. Size 16 13.0 Amps D.C. Size 12 23.0 Amps D.C.
Insulation Resistance 5,000 megohms minimum
MechanicalVibration Std - 20 g’s; 12 hours (Synasoidal) MMB / Self-lock - 39.6 g’s RMS, 48 hours (Random)
50 g’s
Contact Retention Size 20 - 20 lb minimum Size 16 - 25 lb minimum Size 12 - 30 lb minimum
Durability Threaded - 200 mating cycles Bayonet - 500 mating cycles
a. Positive Location Captivated Insert (Mechanical Interlock)
b. Insert Face Seal
c. Socket Contact, MIL-C-39029/32
d. Pressuring Seal Contact
e. Anti-Deflection Disc
f. Resilient Socket Insert
g. Insert Rim Seal
h. Dynamic “O” Ring Shell Seal
i. Five-Key Shell Polarization
j. Metal-to-Metal Shoulder
k. Bayonet or Threaded Coupling, Permanent Captivation
l. Contact Retention Clip
m. Pin Contact, MIL-C-39029/31
n. Wire Sealing Risers
o. Grommet
MIL-C-26500 C48 SERIES
Introduction
B
CDF EG HIL JKO MN
A
4
C48 Series Connectors
Military Stand Part Numbers
You can use MS* as well as C48 Series part numbers when ordering C48 Series connects.*MS part numbers are supplied less cable support. If cable support is desired, it must be ordered separately.
Series Designation
Coupling Style 0 = Threaded1 = Bayonet
Shell Style 0 = Square flange receptacle3 = Single-hole mounting receptacle6 = Straight plug
Environmental Class R = Meets MIL-C-26500 (USAF)
Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24
Alternate Shell Positions 6, 7, 8, 9, 10, see page 4, Table 1(Omit for normal position)
Contact Style P = PinS = Socket
Insert Arrangements
See page 5
Order Code (Deviations) 100 = Connector with contacts & cable support102 = Connector less cable support with contacts105 = Connector less contacts with cable support106 = Connector less contacts & less cable support*See order codes for Boeing on page 15
Environmental Class R = Meets MIL-C-26500 (USAF)
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, or 24
Contact Style P = PinS = Socket
Insert Arrangements See page 5
Coupling Style
T = ThreadedB = Bayonet
Alternate Shell Positions N, 6, 7, 8, 9, Y, see page 4, Table 1Military Designation
MS24264 = Square-flange receptacleMS24265 = Single-hole mounting receptacleMS24266 = Straight plug
C48 - 0 6 R 22 - 55 P 6 -102
MS24266 R 22 T 55 P 6
Ordering Information
Shell Keying (Front face of receptacle shown) Alternate position 6 through Y incorporate special shell polarizing key and keyways. All inserts remain in the normal posiiton.
Connecetor Size 8 and 10 Connecetor Size 12, 14, 16, 18, 20, 22, 24 and 28
Position A B C D A B C D
Normal (N) 105º 140º 215º 140º 105º 140º 215º 265º
6 102º 132º 248º 275º 18º 149º 192º 259º
7 80º 118º 230º 140º 92º 152º 222º 342º
8 35º 140º 205º 275º 84º 152º 204º 342º
9 64º 155º 234º 140º 24º 135º 199º 334º
10 or Y* 25º 115º 220º 275º 98º 152º 268º 338º
*Not available in Size 8 Connectors. See indivdual part number systems. 3-4 Call Toll Free: 1 (800) 323-9612
3
C48 SeriesInserts Available(Showing Front Face of Socket Inserts)
Alternate Shell Positions (Front face of receptacle shown)NOTE: Alternate positions 6 through Y incorporate special shell polarizingkey and keyways. All inserts remain in the normal position.
For Connector SizeFor Connector Size 8 and 10 12, 14, 16, 18, 20, 22, 24, and 28
Positions A B C D A B C DNormal (N) 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°7 80° 118° 230° 312° 92° 152° 222° 342°8 35° 140° 205° 275° 84° 152° 204° 334°9 64° 155° 234° 304° 24° 135° 199° 240°
10 or Y* 25° 115° 220° 270° 98° 152° 268° 338°*Not available in Size 8 Connector. See individual part number systems.
† = #1 shielded contact is interchangeablewith #12 power contact.
(Y) = Available in Boeing Insert Style.
(Y) (Y) (Y) (Y) (Y)
(Y)
(Y)
(Y)(Y)
(Y)(Y)(Y)(Y)
(Y)(Y)
(Y)(Y)(Y)
ShellSize-14
ShellSize-18
ShellSize-20
ShellSize-22
ShellSize-24
ShellSize-28
CN096XCN102XSeriesOnly
ShellSize-8
ShellSize-10
ShellSize-12
ShellSize-16
Table 1 - Alternate Shell Positions
5
C48 Series Connectors
Showing Front Face of Socket Inserts
Shell Size 24
23#20 contacts 20#16 contacts Insert 24-43(Y)
2#12 contacts 55#20 contacts Insert 24-57†(Y)
61#20 contacts Insert 24-61(Y)
29#16 contacts Insert 24-29
30#16 contacts Insert 24-30
Shell Size 28
42#16 contacts Insert 28-42
Shell Size 8
2#20 contacts Insert 8-2(Y)
3#20 contacts Insert 8-3(Y)
Shell Size 10
2#20 contacts Insert 10-2(Y)
2#16 contacts Insert 10-20
5#20 contacts Insert 10-5(Y)
Shell Size 12
3#16 contacts Insert 12-3
12#20 contacts Insert 12-12(Y)
Shell Size 14
2#16 contacts 1#2 shielded contact
Insert 14-3
4#12 contacts Insert 14-4†
7#16 contacts Insert 14-7
9#20 contacts 3#16 contact
Insert 14-12(Y)
15#20 contacts Insert 14-15(Y)
Shell Size 16
10#16 contacts Insert 16-10
24#20 contacts Insert 16-24(Y)
Shell Size 18
8#12 contacts Insert 18-8†
10#16 contacts 1#2 shielded contact
Insert 18-11
14#16 contacts Insert 18-14
31#20 contacts Insert 18-31(Y)
Shell Size 20
16#16 contacts Insert 20-16
19#20 contacts 6#12 contacts
Insert 20-25†(Y)
24#20 contacts 4#12 contacts
Insert 20-28†(Y)
37#20 contacts 2#16 contacts
Insert 20-39†(Y)
41#20 contacts Insert 20-41(Y)
Shell Size 22
12#12 contacts Insert 22-12†
19#16 contacts Insert 22-19
26#20 contacts 6#12 contacts
Insert 22-32†(Y)
55#20 contacts Insert 22-55(Y)
27#20 contacts 12#16 contacts Insert 22-39(Y)
Insert Arrangement
3-4 Call Toll Free: 1 (800) 323-9612
3
C48 SeriesInserts Available(Showing Front Face of Socket Inserts)
Alternate Shell Positions (Front face of receptacle shown)NOTE: Alternate positions 6 through Y incorporate special shell polarizingkey and keyways. All inserts remain in the normal position.
For Connector SizeFor Connector Size 8 and 10 12, 14, 16, 18, 20, 22, 24, and 28
Positions A B C D A B C DNormal (N) 105° 140° 215° 265° 105° 140° 215° 265°
6 102° 132° 248° 320° 18° 149° 192° 259°7 80° 118° 230° 312° 92° 152° 222° 342°8 35° 140° 205° 275° 84° 152° 204° 334°9 64° 155° 234° 304° 24° 135° 199° 240°
10 or Y* 25° 115° 220° 270° 98° 152° 268° 338°*Not available in Size 8 Connector. See individual part number systems.
† = #1 shielded contact is interchangeablewith #12 power contact.
(Y) = Available in Boeing Insert Style.
(Y) (Y) (Y) (Y) (Y)
(Y)
(Y)
(Y)(Y)
(Y)(Y)(Y)(Y)
(Y)(Y)
(Y)(Y)(Y)
ShellSize-14
ShellSize-18
ShellSize-20
ShellSize-22
ShellSize-24
ShellSize-28
CN096XCN102XSeriesOnly
ShellSize-8
ShellSize-10
ShellSize-12
ShellSize-16
6
Threaded CouplingsC48-06RXX-XXXXMS24266RXXTXXXXBACC45FS1
3-5Call Toll Free: 1 (800) 323-9612
3
C48 SeriesPlug Connectors
Threaded CouplingC48-06RXX-XXXXMS24266RXXTXXXXBACC45FS1
Bayonet CouplingC48-16RXX-XXXXMS24266RXXBXXXXBACC45FT1
Dimensions
Shell A. Dia. B. Dia. C. Max. D. Thread Size in mm in mm in mm UNEF-2A
8 .328 8.331 .437 11.100 .776 19.712 .437-2810 .420 10.668 .562 14.275 .906 23.013 .562-2412 .580 14.732 .750 19.050 1.078 27.381 .750-2014 .664 16.866 .812 20.625 1.141 28.982 .812-2016 .769 19.533 .938 23.825 1.266 32.157 .937-2018 .902 22.911 1.062 26.975 1.375 34.925 1.062-1820 1.033 26.238 1.182 30.023 1.510 38.354 1.187-1822 1.152 29.261 1.312 33.325 1.625 41.275 1.312-1824 1.282 32.253 1.432 36.373 1.760 44.704 1.437-18
1Boeing Specifications, see page 3-14.
1.345 (34.164)Max.
1.345 (34.164)Max.
Bayonet CouplingC48-16RXX-XXXXMS24266RXXBXXXXBACC45FT1
3-5Call Toll Free: 1 (800) 323-9612
3
C48 SeriesPlug Connectors
Threaded CouplingC48-06RXX-XXXXMS24266RXXTXXXXBACC45FS1
Bayonet CouplingC48-16RXX-XXXXMS24266RXXBXXXXBACC45FT1
Dimensions
Shell A. Dia. B. Dia. C. Max. D. Thread Size in mm in mm in mm UNEF-2A
8 .328 8.331 .437 11.100 .776 19.712 .437-2810 .420 10.668 .562 14.275 .906 23.013 .562-2412 .580 14.732 .750 19.050 1.078 27.381 .750-2014 .664 16.866 .812 20.625 1.141 28.982 .812-2016 .769 19.533 .938 23.825 1.266 32.157 .937-2018 .902 22.911 1.062 26.975 1.375 34.925 1.062-1820 1.033 26.238 1.182 30.023 1.510 38.354 1.187-1822 1.152 29.261 1.312 33.325 1.625 41.275 1.312-1824 1.282 32.253 1.432 36.373 1.760 44.704 1.437-18
1Boeing Specifications, see page 3-14.
1.345 (34.164)Max.
1.345 (34.164)Max.
Shell Size
ADiameter
BDiameter
CMaximum
DThread
in mm in mm in mm UNEF-2A
8 0.328 8.331 0.437 11.100 0.776 19.712 0.437-28
10 0.420 10.668 0.562 14.275 0.906 23.013 0.562-24
12 0.580 14.732 0.750 19.050 1.078 27.381 0.750-20
14 0.664 16.866 0.812 20.625 1.141 28.982 0.812-20
16 0.769 19.533 0.938 23.825 1.266 32.157 0.937-20
18 0.902 22.911 1.062 26.975 1.375 34.925 1.062-18
20 1.033 26.238 1.182 30.023 1.510 38.354 1.187-18
22 1.152 29.261 1.312 33.325 1.625 41.275 1.312-18
24 1.282 32.253 1.432 36.373 1.760 44.704 1.437-18
11Boeing specifications, see page 15Boeing specifications, see page 15
C48 Series Connectors
Plug Connectors
7
3-6 Call Toll Free: 1 (800) 323-9612
3
Square Flange,Threaded CouplingC48-OORXX-XXXXMS24264RXXTXXXBACC45FM1
Square Flange,Bayonet CouplingC48-1ORXX-XXXXMS24264RXXBXXXBACC45FN1
Dimensions
A B C D F G H J KShell +.005 (.127) +.005 (.127) Max. Dia. Max. Max. Thread Thread Min. Min.Size in mm in mm in mm in mm in mm UNEF-2A UNEF-2A in mm in mm
8 .812 20.625 .594 15.088 .125 3.175 .561 14.250 .437 11.100 .562-24 .437-28 .620 15.748 .447 11.35410 .937 23.800 .719 18.263 .125 3.175 .696 17.679 .562 14.275 .687-24 .562-24 .748 18.999 .572 14.52912 1.031 26.188 .812 20.625 .125 3.175 .875 22.225 .750 19.050 .875-20 .750-20 .913 23.190 .760 19.30414 1.125 28.575 .906 23.013 .125 3.175 .935 23.749 .812 20.625 .937-20 .812-20 .980 24.892 .822 20.87916 1.250 31.750 .969 24.613 .125 3.175 1.062 26.975 .938 23.825 1.062-18 .937-20 1.107 28.119 .948 24.07918 1.343 34.112 1.062 26.975 .125 3.175 1.187 30.150 1.062 26.975 1.187-18 1.062-18 1.209 30.709 1.072 27.22920 1.437 36.500 1.156 29.363 .125 3.175 1.312 33.325 1.182 30.023 1.312-18 1.187-18 1.337 33.960 1.192 30.27722 1.562 39.675 1.250 31.750 .125 3.175 1.437 36.500 1.312 33.325 1.437-18 1.312-18 1.452 36.881 1.322 33.57924 1.703 43.256 1.375 34.925 .154 3.912 1.562 39.675 1.432 36.373 1.562-18 1.437-18 1.577 40.056 1.442 36.627
1 = Boeing specifications, see page 3-14.
C48 SeriesReceptacle Connectors
1.407 (35.738)Max.
1.407 (35.738)Max.
Square Flange, Threaded CouplingC48-OORXX-XXXXMS24264RXXTXXXBACC45FM1
3-6 Call Toll Free: 1 (800) 323-9612
3
Square Flange,Threaded CouplingC48-OORXX-XXXXMS24264RXXTXXXBACC45FM1
Square Flange,Bayonet CouplingC48-1ORXX-XXXXMS24264RXXBXXXBACC45FN1
Dimensions
A B C D F G H J KShell +.005 (.127) +.005 (.127) Max. Dia. Max. Max. Thread Thread Min. Min.Size in mm in mm in mm in mm in mm UNEF-2A UNEF-2A in mm in mm
8 .812 20.625 .594 15.088 .125 3.175 .561 14.250 .437 11.100 .562-24 .437-28 .620 15.748 .447 11.35410 .937 23.800 .719 18.263 .125 3.175 .696 17.679 .562 14.275 .687-24 .562-24 .748 18.999 .572 14.52912 1.031 26.188 .812 20.625 .125 3.175 .875 22.225 .750 19.050 .875-20 .750-20 .913 23.190 .760 19.30414 1.125 28.575 .906 23.013 .125 3.175 .935 23.749 .812 20.625 .937-20 .812-20 .980 24.892 .822 20.87916 1.250 31.750 .969 24.613 .125 3.175 1.062 26.975 .938 23.825 1.062-18 .937-20 1.107 28.119 .948 24.07918 1.343 34.112 1.062 26.975 .125 3.175 1.187 30.150 1.062 26.975 1.187-18 1.062-18 1.209 30.709 1.072 27.22920 1.437 36.500 1.156 29.363 .125 3.175 1.312 33.325 1.182 30.023 1.312-18 1.187-18 1.337 33.960 1.192 30.27722 1.562 39.675 1.250 31.750 .125 3.175 1.437 36.500 1.312 33.325 1.437-18 1.312-18 1.452 36.881 1.322 33.57924 1.703 43.256 1.375 34.925 .154 3.912 1.562 39.675 1.432 36.373 1.562-18 1.437-18 1.577 40.056 1.442 36.627
1 = Boeing specifications, see page 3-14.
C48 SeriesReceptacle Connectors
1.407 (35.738)Max.
1.407 (35.738)Max.
Square Flange, Bayonet CouplingC48-1ORXX-XXXXMS24264RXXBXXXBACC45FN1
Shell Size
A±0.005 (0.127)
B±0.005 (0.127)
CMaximumDiameter
DMaximum
FMaximum
GThread
H Thread
JMinimum
KMinimum
in mm in mm in mm in mm in mm UNEF-2A UNEF-2A in mm in mm
8 0.812 20.625 0.594 15.088 0.125 3.175 0.561 14.250 0.437 11.100 0.562-24 0.437-28 0.620 15.748. 0.447 11.35
10 0.937 23.800 0.719 18.263 0.125 3.175 0.696 17.679 0.562 14.275 0.687-24 0.562-24 0.748 18.999 0.572 14.52
12 1.031 26.188 0.812 20.625 0.125 3.175 0.875 22.225 0.750 19.050 0.875-20 0.750-20 0.913 23.190 0.760 19.30
14 1.125 28.575 0.906 23.013 0.125 3.175 0.935 23.749 0.812 20.625 0.937-20 0.812-20 0.980 24.892 0.822 20.87
16 1.250 31.750 0.969 24.613 0.125 3.175 1.062 26.975 0.938 23.825 1.062-18 0.937-20 1.107 28.119 0.948 24.07
18 1.343 34.112 1.062 26.975 0.125 3.175 1.187 30.150 1.062 26.975 1.187-18 1.062-18 1.209 30.709 1.072 27.22
20 1.437 36.500 1.156 29.363 0.125 3.175 1.312 33.325 1.182 30.023 1.312-18 1.187.18 1.337 33.960 1.192 30.27
22 1.562 39.675 1.250 31.750 0.125 3.175 1.437 36.500 1.312 33.325 1.437-18 1.312.18 1.452 36.881 1.322 33.57
24 1.703 43.256 1.375 34.925 0.154 3.912 1.562 39.675 1.432 36.373 1.562-18 1.437.18 1.577 40.056 1.442 36.62
11Boeing specifications, see page 15Boeing specifications, see page 15
C48 Series Connectors
Receptacle Connectors
8
Single-Hole Mount, Threaded CouplingC48-03RXX-XXXXMS24265RXXTXXX
3-7
3
Call Toll Free: 1 (800) 323-9612
Single-Hole Mount,Threaded CouplingC48-03RXX-XXXXMS24265RXXTXXX
Single-Hole Mount,Bayonet CouplingC48-13RXX-XXXXMS24265RXXBXXX
Dimensions
A B C D E G H J KShell +.005 (.127) Max. Hex +.003 (.076) Max. Max. Dia. Max. Thread Thread ThreadSize in mm in mm in mm in mm in mm in mm UNEF-2A UNEF-2A UNEF-2A
8 .979 24.867 .828 21.031 .593 15.062 1.068 27.127 .561 14.249 .437 11.100 .562-24 .625-20* .437-2810 1.104 28.042 .953 24.206 .718 18.237 1.192 30.277 .696 17.678 .562 14.275 .687-24 .750-20 .562-2412 1.291 32.791 1.140 28.956 .905 22.987 1.380 35.052 .875 22.225 .750 19.050 .875-20 .937-20 .750-2014 1.391 35.331 1.250 31.750 .968 24.587 1.505 38.227 .935 23.749 .812 20.625 .937-20 1.000-20 .812-2016 1.516 38.506 1.329 33.757 1.093 27.762 1.630 41.402 1.062 26.975 .938 23.825 1.062-18 1.125-20* .937-2018 1.641 41.681 1.455 36.957 1.217 30.912 1.740 44.196 1.187 30.150 1.062 26.975 1.187-18 1.250-20* 1.062-1820 1.766 44.856 1.642 41.707 1.342 34.087 1.860 47.244 1.312 33.325 1.182 30.023 1.312-18 1.375-18 1.187-1822 1.954 49.632 1.705 43.307 1.467 37.262 2.040 51.816 1.437 36.500 1.312 33.325 1.437-18 1.500-20* 1.312-1824 2.079 52.807 1.892 48.057 1.592 40.437 2.160 54.864 1.562 39.675 1.432 36.373 1.562-18 1.625-18 1.437-18
* Thread: UN-2A
NOTES:Contact factory for information about Boeing specifications.For mounting hole dimensions and jam nut torques, see page 3-20.
C48 SeriesReceptacleConnectors
1.407 (35.738)Max.
1.407 (35.738)Max.
Single-Hole Mount, Bayonet CouplingC48-13RXX-XXXXMS24265RXXBXXX
3-7
3
Call Toll Free: 1 (800) 323-9612
Single-Hole Mount,Threaded CouplingC48-03RXX-XXXXMS24265RXXTXXX
Single-Hole Mount,Bayonet CouplingC48-13RXX-XXXXMS24265RXXBXXX
Dimensions
A B C D E G H J KShell +.005 (.127) Max. Hex +.003 (.076) Max. Max. Dia. Max. Thread Thread ThreadSize in mm in mm in mm in mm in mm in mm UNEF-2A UNEF-2A UNEF-2A
8 .979 24.867 .828 21.031 .593 15.062 1.068 27.127 .561 14.249 .437 11.100 .562-24 .625-20* .437-2810 1.104 28.042 .953 24.206 .718 18.237 1.192 30.277 .696 17.678 .562 14.275 .687-24 .750-20 .562-2412 1.291 32.791 1.140 28.956 .905 22.987 1.380 35.052 .875 22.225 .750 19.050 .875-20 .937-20 .750-2014 1.391 35.331 1.250 31.750 .968 24.587 1.505 38.227 .935 23.749 .812 20.625 .937-20 1.000-20 .812-2016 1.516 38.506 1.329 33.757 1.093 27.762 1.630 41.402 1.062 26.975 .938 23.825 1.062-18 1.125-20* .937-2018 1.641 41.681 1.455 36.957 1.217 30.912 1.740 44.196 1.187 30.150 1.062 26.975 1.187-18 1.250-20* 1.062-1820 1.766 44.856 1.642 41.707 1.342 34.087 1.860 47.244 1.312 33.325 1.182 30.023 1.312-18 1.375-18 1.187-1822 1.954 49.632 1.705 43.307 1.467 37.262 2.040 51.816 1.437 36.500 1.312 33.325 1.437-18 1.500-20* 1.312-1824 2.079 52.807 1.892 48.057 1.592 40.437 2.160 54.864 1.562 39.675 1.432 36.373 1.562-18 1.625-18 1.437-18
* Thread: UN-2A
NOTES:Contact factory for information about Boeing specifications.For mounting hole dimensions and jam nut torques, see page 3-20.
C48 SeriesReceptacleConnectors
1.407 (35.738)Max.
1.407 (35.738)Max.
Shell Size
A±0.005 (0.127)
BMaximum
Hex
C±0.003 (0.076)
DMaximum
EMaximum Diameter
GMaximum
H Thread
J Thread
KThread
in mm in mm in mm in mm in mm UNEF-2A UNEF-2A UNEF-2A UNEF-2A
8 0.979 24.867 0.828 21.031 0.593 15.062 1.068 27.127 0.561 14.249 0.437 0.562-24 0.625-20* 0.437-28
10 1.104 28.042 0.953 24.206 0.718 18.237 1.192 30.277 0.696 17.678 0.562 0.687-24 0.750-20 0.562-24
12 1.291 32.791 1.140 28.956 0.905 22.987 1.380 35.052 0.875 22.225 0.750 0.875-20 0.937-20 0.750-20
14 1.391 35.331 1.250 31.750 0.968 24.587 1.505 38.227 0.935 23.749 0.812 0.937-20 1.000-20 0.812-20
16 1.516 38.506 1.329 33.757 1.093 27.762 1.630 41.402 1.062 26.975 0.938 1.062-18 1.125-20* 0.937-20
18 1.641 41.681 1.455 36.957 1.217 30.912 1.740 44.196 1.187 30.150 1.062 1.187-18 1.250-20* 1.062-18
20 1.766 44.856 1.642 41.707 1.342 34.087 1.860 47.244 1.312 33.325 1.182 1.312-18 1.375-18 1.187-18
22 1.954 49.632 1.705 43.307 1.467 37.262 2.040 51.816 1.437 36.500 1.312 1.437-18 1.500-20* 1.312-18
24 2.079 52.807 1.892 48.057 1.592 40.437 2.160 54.864 1.562 39.675 1.432 1.562-18 1.625-18 1.437-18
* Thread: UN-2A* Thread: UN-2A
NOTESNOTES::Contact factory for information about Boeing specifications.Contact factory for information about Boeing specifications.For mounting hole dimensions and jam nut torques, see page 21.For mounting hole dimensions and jam nut torques, see page 21.
C48 Series Connectors
9
Square-Flange, Threaded CouplingCN0915B-XXXXXXX-XXX
3-8
3
Call Toll Free: 1 (800) 323-9612
C48/CN0915 SeriesLimited Wiring Space Receptacle ConnectorsCrimp Removal Contacts
Square-Flange,Bayonet CouplingCN0915A-XXXXXXX-XXX
Dimensions
A B C D F GShell +.0045 (.114) +.005 (.127) +.004 (.102) Max. +.0015 (.038) ThreadSize in mm in mm in mm in mm in mm UNEF-2A
8 .812 20.625 .594 15.088 .121 3.073 .561 14.250 .497 12.624 .562-2410 .937 23.800 .719 18.263 .121 3.073 .696 17.679 .503 15.799 .687-2412 1.031 26.187 .812 20.625 .121 3.073 .875 22.225 .745 18.923 .875-2014 1.125 28.575 .906 23.012 .121 3.073 .935 23.749 .871 22.123 .937-2016 1.150 29.210 .969 24.613 .121 3.073 1.062 26.975 .995 25.273 1.062-1818 1.343 35.382 1.062 26.975 .121 3.073 1.187 30.150 1.058 26.873 1.187-1820 1.437 36.500 1.156 29.362 .121 3.073 1.312 33.325 1.184 30.074 1.312-1822 1.562 39.675 1.250 31.750 .121 3.073 1.437 36.500 1.307 33.198 1.437-1824 1.703 43.256 1.375 34.925 .154 3.912 1.562 39.675 1.432 36.373 1.562-18
NOTES:
1 For other modifications, classes, etc., contact factory.• For mounting hole dimensions, see page 3-20.• Uses CRIM-LOK contacts. See page 3-12.* Former order code - 100 designated rhodium plated contacts
Ordering Information1 CN0915 A 10 A 05 P N - 000Series DesignationCN0915
Series ModificationA - Bayonet CouplingB - Threaded Coupling
Environmental ClassA - Anodized AluminumN - Electroless Nickel-Plated AluminumS - Stainless Steel
Shell Size8, 10, 12, 14, 16, 18, 20, 22, & 24
Order Code000 - Less Contacts200 - Gold-Plated Contacts* See below
Shell PositionN, 6, 7, 8, 9, 10 (See page 3-4)Contact StyleP - PinS - SocketInsert Arrangement(See page 3-4)
Square-Flange,Threaded CouplingCN0915B-XXXXXXX-XXX
Ordering Information1
Square-Flange, Bayonet CouplingCN0915A-XXXXXXX-XXX
Shell Size
A±0.0045 (0.114)
B±0.005 (0.127)
C±0.004 (0.102)
DMaximum
F±0.0015 (0.038)
GThread
in mm in mm in mm in mm in mm UNEF-2A
8 0.812 20.625 0.594 15.088 0.121 3.073 0.561 14.250 0.497 12.624 0.562-24
10 0.937 23.800 0.719 18.263 0.121 3.073 0.696 17.679 0.503 15.799 0.687-24
12 1.031 26.187 0.812 20.625 0.121 3.073 0.875 22.225 0.745 18.923 0.875-20
14 1.125 28.575 0.906 23.012 0.121 3.073 0.935 23.749 0.871 22.123 0.937-20
16 1.150 29.210 0.969 24.613 0.121 3.073 1.062 26.975 0.995 25.273 1.062-18
18 1.343 35.382 1.062 26.975 0.121 3.073 1.187 30.150 1.058 26.873 1.187-18
20 1.437 36.500 1.156 29.362 0.121 3.073 1.312 33.325 1.184 30.074 1.312-18
22 1.562 39.675 1.250 31.750 0.121 3.073 1.437 36.500 1.307 33.198 1.437-18
24 1.703 43.256 1.375 34.925 0.154 3.912 1.562 39.675 1.432 36.373 1.562-18
NOTESNOTES::
1 For other modifications, classes, etc., contact factory 1 For other modifications, classes, etc., contact factory • For mounting hole dimensions, see page 21 • For mounting hole dimensions, see page 21 • Uses CRIM-LOK contacts. See page 13• Uses CRIM-LOK contacts. See page 13
3-8
3
Call Toll Free: 1 (800) 323-9612
C48/CN0915 SeriesLimited Wiring Space Receptacle ConnectorsCrimp Removal Contacts
Square-Flange,Bayonet CouplingCN0915A-XXXXXXX-XXX
Dimensions
A B C D F GShell +.0045 (.114) +.005 (.127) +.004 (.102) Max. +.0015 (.038) ThreadSize in mm in mm in mm in mm in mm UNEF-2A
8 .812 20.625 .594 15.088 .121 3.073 .561 14.250 .497 12.624 .562-2410 .937 23.800 .719 18.263 .121 3.073 .696 17.679 .503 15.799 .687-2412 1.031 26.187 .812 20.625 .121 3.073 .875 22.225 .745 18.923 .875-2014 1.125 28.575 .906 23.012 .121 3.073 .935 23.749 .871 22.123 .937-2016 1.150 29.210 .969 24.613 .121 3.073 1.062 26.975 .995 25.273 1.062-1818 1.343 35.382 1.062 26.975 .121 3.073 1.187 30.150 1.058 26.873 1.187-1820 1.437 36.500 1.156 29.362 .121 3.073 1.312 33.325 1.184 30.074 1.312-1822 1.562 39.675 1.250 31.750 .121 3.073 1.437 36.500 1.307 33.198 1.437-1824 1.703 43.256 1.375 34.925 .154 3.912 1.562 39.675 1.432 36.373 1.562-18
NOTES:
1 For other modifications, classes, etc., contact factory.• For mounting hole dimensions, see page 3-20.• Uses CRIM-LOK contacts. See page 3-12.* Former order code - 100 designated rhodium plated contacts
Ordering Information1 CN0915 A 10 A 05 P N - 000Series DesignationCN0915
Series ModificationA - Bayonet CouplingB - Threaded Coupling
Environmental ClassA - Anodized AluminumN - Electroless Nickel-Plated AluminumS - Stainless Steel
Shell Size8, 10, 12, 14, 16, 18, 20, 22, & 24
Order Code000 - Less Contacts200 - Gold-Plated Contacts* See below
Shell PositionN, 6, 7, 8, 9, 10 (See page 3-4)Contact StyleP - PinS - SocketInsert Arrangement(See page 3-4)
Square-Flange,Threaded CouplingCN0915B-XXXXXXX-XXX
Ordering Information1
Limited Wiring Space Receptacle Connecters, Crimp Removal Contacts
CN0915, C48 Series Connectors
10
NOTESNOTES::1 For other modifications, classes, etc., contact factory1 For other modifications, classes, etc., contact factory• For mounting hole dimensions• For mounting hole dimensions, see page 21, see page 21• Uses CRIM-LOK contacts. See page 13• Uses CRIM-LOK contacts. See page 13* Former order code - 100 designated rhodium plated contacts* Former order code - 100 designated rhodium plated contacts
Series Modification A = Bayonet couplingB = Threaded coupling
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, or 24
Contact Style P = PinS = Socket
Shell PositionN, 6, 7, 8, 9, 10, see page 4, Table 1
Insert Arrangement
See page 5
Order Code 000 = Less contacts200 = Gold-plated contacts
Series DesignationCN0915
Environmental Class A = Anodized aluminumN = Electroless nickel-plated aluminumS = Stainless steel
CN0915 A 10 A 05 P N - 000
CN0915, C48 Series Connectors
Ordering Information
11
Contact Style P = PinS = Socket
Order Code 000 = Less contacts200 = Gold-plated contacts
Single-Hole Mount, Bayonet CouplingCN0942D XXXXXXXXXCN0944D XXXXXXXXX
3-9Call Toll Free: 1 (800) 323-9612
3
CN0942/CN0944 Series (C48 Family)Short Receptacle ConnectorsNon-Removable Contacts
Single-Hole Mount,Bayonet CouplingCN0942D XXXXXXXXXCN0944D XXXXXXXXX
Square Flange,Bayonet CouplingCN0942B XXXXXXXXXCN0944B XXXXXXXXX
Dimensions
A B C D F J K LShell Max. Max. Max. Max. Thread +.005 (.127) +.005 (.127) +.003 (.176)Size in mm in mm in mm in mm UNEF-2A in mm in mm in mm
8 .984 24.994 .828 21.031 1.068 27.127 .561 14.250 .625-20* .812 20.625 .594 15.088 .593 15.06210 1.109 28.169 .953 24.206 1.192 30.277 .696 17.679 .750-20 .937 23.800 .719 18.263 .718 18.23712 1.296 32.919 1.140 28.956 1.380 35.052 .875 22.225 .937-20 1.031 26.188 .812 20.625 .905 22.98714 1.396 35.459 1.250 31.750 1.505 38.227 .935 23.749 1.000-20 1.125 28.575 .906 23.013 .968 24.58716 1.521 38.634 1.329 33.757 1.630 41.402 1.062 26.975 1.125-20* 1.250 31.750 .969 24.613 1.093 27.76218 1.646 41.809 1.455 36.957 1.740 44.196 1.187 30.150 1.250-20* 1.343 34.112 1.062 26.975 1.217 30.91220 1.771 44.984 1.642 41.707 1.860 47.244 1.312 33.325 1.375-18 1.437 36.500 1.156 29.363 1.342 34.08722 1.959 49.759 1.705 43.307 2.040 51.816 1.437 36.500 1.500-20* 1.562 39.675 1.250 31.750 1.467 37.26224 2.084 52.934 1.892 48.057 2.160 54.864 1.562 39.675 1.625-18 1.703 43.256 1.375 34.925 1.592 40.437
S**
T**
T*
S*
* Th’d: UN-2A** See “S” and “T” dimensions on page 3-10.
Square Flange, Bayonet CouplingCN0942B XXXXXXXXXCN0944B XXXXXXXXX
Shell Size
AMaximum
BMaximum
CMaximum
DMaximum
FThread
J±0.005 (0.127)
K ±0.005 (0.127)
L±0.003 (0.076)
in mm in mm in mm in mm UNEF-2A in mm in mm in mm
8 0.984 24.994 0.828 21.031 1.068 27.127 0.561 14.250 0.625-20* 0.812 20.625 0.594 15.088 0.593 15.062
10 1.109 28.169 0.953 24.206 1.192 30.277 0.696 17.679 0.750-20 0.937 23.800 0.719 18.263 0.718 18.237
12 1.296 32.919 1.140 28.956 1.380 35.052 0.875 22.225 0.937-20 1.031 26.188 0.812 20.625 0.905 22.987
14 1.396 35.459 1.250 31.750 1.505 38.227 0.935 23.749 1.000-20 1.125 28.575 0.906 23.013 0.968 24.587
16 1.521 38.634 1.329 33.757 1.630 41.402 1.062 26.975 1.125-20* 1.250 31.750 0.969 24.613 1.093 27.762
18 1.646 41.809 1.455 36.957 1.740 44.196 1.187 30.150 1.250-20* 1.343 34.112 1.062 26.975 1.217 30.912
20 1.771 44.984 1.642 41.707 1.860 47.244 1.312 33.325 1.375-18 1.437 36.500 1.156 29.363 1.342 34.087
22 1.959 49.759 1.705 43.307 2.040 51.816 1.437 36.500 1.500-20* 1.562 39.675 1.250 31.750 1.467 37.262
24 2.084 52.934 1.892 48.057 2.160 54.864 1.562 39.675 1.625-18 1.703 43.256 1.375 34.925 1.592 40.437
* Th’d: UN-2A* Th’d: UN-2A
** See “S” and “T” dimensions on page 11** See “S” and “T” dimensions on page 11
3-9Call Toll Free: 1 (800) 323-9612
3
CN0942/CN0944 Series (C48 Family)Short Receptacle ConnectorsNon-Removable Contacts
Single-Hole Mount,Bayonet CouplingCN0942D XXXXXXXXXCN0944D XXXXXXXXX
Square Flange,Bayonet CouplingCN0942B XXXXXXXXXCN0944B XXXXXXXXX
Dimensions
A B C D F J K LShell Max. Max. Max. Max. Thread +.005 (.127) +.005 (.127) +.003 (.176)Size in mm in mm in mm in mm UNEF-2A in mm in mm in mm
8 .984 24.994 .828 21.031 1.068 27.127 .561 14.250 .625-20* .812 20.625 .594 15.088 .593 15.06210 1.109 28.169 .953 24.206 1.192 30.277 .696 17.679 .750-20 .937 23.800 .719 18.263 .718 18.23712 1.296 32.919 1.140 28.956 1.380 35.052 .875 22.225 .937-20 1.031 26.188 .812 20.625 .905 22.98714 1.396 35.459 1.250 31.750 1.505 38.227 .935 23.749 1.000-20 1.125 28.575 .906 23.013 .968 24.58716 1.521 38.634 1.329 33.757 1.630 41.402 1.062 26.975 1.125-20* 1.250 31.750 .969 24.613 1.093 27.76218 1.646 41.809 1.455 36.957 1.740 44.196 1.187 30.150 1.250-20* 1.343 34.112 1.062 26.975 1.217 30.91220 1.771 44.984 1.642 41.707 1.860 47.244 1.312 33.325 1.375-18 1.437 36.500 1.156 29.363 1.342 34.08722 1.959 49.759 1.705 43.307 2.040 51.816 1.437 36.500 1.500-20* 1.562 39.675 1.250 31.750 1.467 37.26224 2.084 52.934 1.892 48.057 2.160 54.864 1.562 39.675 1.625-18 1.703 43.256 1.375 34.925 1.592 40.437
S**
T**
T*
S*
* Th’d: UN-2A** See “S” and “T” dimensions on page 3-10.
Short Receptacle Connectors, Non-Removable Contacts
CN0942/CN0944, C48 Series Connectors
12
Table 2 - CN0942 Series: Fluorosilicone Inserts
Termination Designator Contact Style Termination
T Minimum S ±0.002
01* P & S 0.250 0.025
02* X & Y 0.230 N/A
03** P & S 0.144 0.025
04** X & Y 0.124 N/A
06* T & W 0.900 0.025
* Applies to CN0942B/CN0942C ** Applies to CN0942D/CN0942E
CN0942 B 10 J 05 P N 01
Series Modification B = Square-flange mount bayonet coupled C = Square-flange mount thread coupled D = Single-hole mount bayonet coupled E = Single-hole mount thread coupled
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, or 24
Contact Style Solder pin terminalP = PinS = Socket
Solder cup terminalX = PinY = Socket
Wire wrap terminalT = PinW = Socket
Insert Arrangements See page 5
Class
G = Cadmium/nickel finishJ = Anodized finishN = Electroless nickel finish
Shell Position N, 6, 7, 8, 9, Y, see page 4, Table 1
Series Designation Termination See table
Ordering Information
CN0942 Series: Fluorosilicone Inserts
CN0942 B 10 J 05 P N 01
Series Modification B = Square-flange mount bayonet coupled C = Square-flange mount thread coupled D = Single-hole mount bayonet coupled E = Single-hole mount thread coupled
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, or 24
Contact Style Solder pin terminalP = PinS = Socket
Solder cup terminalX = PinY = Socket
Wire wrap terminalT = PinW = Socket
Insert Arrangements See page 5
Class
G = Cadmium/nickel finishJ = Anodized finishN = Electroless nickel finish
Shell Position
Series Designation
NOTES:NOTES:11 For other modifications, class, etc., consult factory. For other modifications, class, etc., consult factory.For mounting hole dimensions, see page 21.For mounting hole dimensions, see page 21.
Termination See table
CN0942/CN0944, C48 Series Connectors
Fluorosilicone Inserts
13
Table 3 - CN0942 Series: Neoprene Inserts
Termination Designator Termination Type Termination
T Minimum S ±0.002
01* B 0.250 0.025
02* C 0.230 N/A
03** B 0.144 0.025
04** C 0.124 N/A
06* W 0.900 0.025
* Applies to CN0944B/CN0944C ** Applies to CN0944D/CN0944E
Ordering Information
CN0944 Series: Neoprene Inserts
NOTES:NOTES:11 For other modifications, class, etc., consult factory. For other modifications, class, etc., consult factory.For mounting hole dimensions, see page 21.For mounting hole dimensions, see page 21.
CN0944 B 10 R 05 P N C 01
Series Modification B = Square-flange mount bayonet coupled C = Square-flange mount thread coupled D = Single-hole mount bayonet coupled E = Single-hole mount thread coupled
Shell Size 8, 10, 12, 14, 16, 18, 20, 22, or 24
Contact Style P = PinS = Socket
Insert Arrangements See page 5
Class
G = Cadmium/nickel finishN = Electroless nickel finishR = Anodized finish
Shell Position N, 6, 7, 8, 9, Y, see page 4, Table 1
Series Designation Termination See page 13, table 3
Termination Type B = Solder pinC = Solder cupW = Wire wrap
CN0942/CN0944, C48 Series Connectors
Neoprene Inserts
14
C48 Series Accessories
3-11Call Toll Free: 1 (800) 323-9612
3
C48 SeriesAccessories
Cable Support AssemblyCable clamps support cable or wire at the plug or receptacle andprevent twisting and pulling.
Dimensions
XA B I.D. P
Cinch Max. Dia. +.015 (.381) +.005 (.127) C Th’d Max.Size Part No. MS in mm in mm in mm UNEF-2B in mm
8 C48-2840 MS27291-13 .606 15.393 .935 23.749 .186 4.725 .437-28 .789 20.04210 C48-2341 MS27291-1 .731 18.568 .935 23.749 .270 6.858 .562-24 .914 23.21612 C48-2342 MS27291-2 .919 23.343 .935 23.749 .400 10.160 .750-20 1.026 26.06114 C48-2343 MS27291-3 .981 24.918 1.170 29.718 .460 11.684 .812-20 1.090 27.68616 C48-2344 MS27291-4 1.106 28.093 1.170 29.718 .610 15.494 .937-20 1.250 31.75018 C48-2345 MS27291-5 1.231 31.268 1.170 29.718 .690 17.526 1.062-18 1.358 34.49320 C48-2643 MS27291-14 1.356 34.443 1.170 29.718 .816 20.728 1.187-18 1.481 37.61922 C48-2346 MS27291-6 1.481 37.618 1.170 29.718 .940 23.876 1.312-18 1.604 40.74224 C48-2644 MS27291-15 1.606 40.793 1.170 29.178 1.066 27.078 1.437-18 1.729 43.919
C Thread
Cable clamps support cable or wire at the plug or receptacle and prevent twisting and pulling. For use on C48 Series connectors.
Cable Support Assembly
Shell Size
Cinch Part Number
MS Part Number
AMaximum
B±0.005 (0.381)
XI.D. ±0.005 (0.127)
CTh’D
PMaximum
in mm in mm in mm in mm in mm
8 C48-2840 MS27291-13 0.606 15.393 0.935 23.749 0.186 4.725 0.437-28 0.789 20.042 20.042
10 C48-2341 MS27291-1 0.731 18.568 0.935 23.749 0.270 6.858 0.562-24 0.914 23.216 23.216
12 C48-2342 MS27291-2 0.919 23.343 0.935 23.749 0.400 10.160 0.750-20 1.026 26.061 26.061
14 C48-2343 MS27291-3 0.981 24.918 1.170 29.718 0.460 11.684 0.812-20 1.090 27.686 27.686
16 C48-2344 MS27291-4 1.106 28.093 1.170 29.718 0.610 15.494 0.937-20 1.250 31.750 31.750
18 C48-2345 MS27291-5 1.231 31.268 1.170 29.718 0.690 17.526 1.062-18 1.358 34.493 34.493
20 C48-2643 MS27291-14 1.356 34.443 1.170 29.718 0.816 20.728 1.187-18 1.481 37.619 37.619
22 C48-2346 MS27291-6 1.481 37.618 1.170 29.718 0.940 23.876 1.312-18 1.604 40.742 40.742
24 C48-2644 MS27291-15 1.606 40.793 1.170 29.178 1.066 27.078 1.437-18 1.729 43.919 43.919
Cable Support Assembly
15
Contacts
C48 Series Accessories
Cinch Part Number MS Part Number Boeing Part Number Contact Maxium Current Contacts Contacts Contacts Size Wire Size RatingPin Socket Pin Socket Pin Socket (Sheilded) AWG Amps
C48-1226-02 C48-1227-02 No. 1* ** 3
C48-1226-54 C48-1227-54 **** 1
C48-1226-55 C48-1227-55 ***** 1
C48-2187-02 C48-2188-02 No. 2 *** 7.5
M32029/31-235 M39029/32-254 BACC47CN1S BACC47CP1S No. 12 12 41
M32029/31-235 M39029/32-254 BACC47CN1S BACC47CP1S No.14 14 32
M39029/31-229 M39029/32-248 BACC47CN1S BACC47CP1S No. 16 16 22
M39029/31-229 M39029/32-248 BACC47CN1S BACC47CP2S No. 18 18 16
M39029/31-627 M39029/32-260 BACC47CN2S BACC47CP2S No. 20 20 7.5
M39029/31-627 M39029/32-260 BACC47CN2S BACC47CP3S No. 22 22 5.0
M39029/31-627 M39029/32-260 BACC47CN3S BACC47CP3S No. 24 24 3.0
* * Fits into No. 12 power contact cavity. Fits into No. 12 power contact cavity. ** ** Accommodates cables RG174/U, RG179U, RG179A/U, RG187/U, RG188/U, RG161/U, as well as shielded wire. Accommodates cables RG174/U, RG179U, RG179A/U, RG187/U, RG188/U, RG161/U, as well as shielded wire. Can also accommodate Cable MIL-C-27500-22 KING (Extruded) or 22 AWG per MIL-C-7078 type II. Can also accommodate Cable MIL-C-27500-22 KING (Extruded) or 22 AWG per MIL-C-7078 type II. *** *** Accommodates Cable MIL-C-27500 KING; 20 KING; 18 KING (Extruded) or 22, 20, 18 AWG, per MIL-C-7078 type II. Accommodates Cable MIL-C-27500 KING; 20 KING; 18 KING (Extruded) or 22, 20, 18 AWG, per MIL-C-7078 type II. **** **** For use with RG195/U and RG180/U, RG180A/U, and RG1808/U. For use with RG195/U and RG180/U, RG180A/U, and RG1808/U. ***** ***** Accommodates Cables RG178/U, RG178A/U, RG1788/U, and RG196/U.Accommodates Cables RG178/U, RG178A/U, RG1788/U, and RG196/U.
MS Part Number Color Code Size
MS27488-20-2 Red 20
MS27488-16-2 Green 16
MS27488-12-2 Orange 12
Grommet Sealing Plugs
Insertion Tool Removal Tool Crimp Tool Adjustable Turret Contact Size
M81969/17-03 M81969/19-06 M22520/1-01 MS22520/1-02 No. 20
M81969/17-04 M81969/19-01 M22520/1-01 MS22520/1-02 No. 16
M81969/17-05 M81969/19-02 M22520/1-01 MS22520/1-02 No. 12
Crimp/Insertion/Removal tools are listed only for reference, tools are procured from tool manufacture or authorized distributor.Crimp/Insertion/Removal tools are listed only for reference, tools are procured from tool manufacture or authorized distributor.
Insertion/Removal Tools
When you order Cinch C48 Series connectors with contacts, the contact package contains enough contacts to complete the insert arrangement plus two spares. The package also includes sealing plugs for 15% of the contacts in the inserts, minimum of three. To provide proper sealing, insert unwired contacts and sealing plugs in all unused holes. (Use a #12 contact for a #1 shielded hole.) To order contacts and sealing plugs separately use the part numbers in the table below.
16
CN0966 Series
NOTES:NOTES:
11 For modifications, classes, etc. not listed, consult factory For modifications, classes, etc. not listed, consult factory * Th’d: UNS-2A * Th’d: UNS-2A ** Size 28 = 1.395 (35.434) ** Size 28 = 1.395 (35.434) * Former order code - 100 designated rhodium plated contacts* Former order code - 100 designated rhodium plated contacts
Series Modification
A = UngroundedB = Grounded (conductive)
Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Contact Style
P = PinS = Socket
Insert Arrangements
See page 5
Alternate Shell Positions
N, 6, 7, 8, 9, 10 See page 4, table 1
Series Designation
Class
A = Anodized aluminumG = Cadmium/nickel-plated aluminumN = Electroless nickel-plated aluminumS = Stainless steel
Order Code
000 = Less contacts100 = *See below 200 = With gold-plated contact
CN0966 B 10 S 05 P N - 000
Threaded CouplingCN0966XXXXXXXXBACC63BP1
3-15
3
Call Toll Free: 1 (800) 323-9612
CN0966 Series (C48 Family)Self-Locking Plug Connectors
Threaded CouplingCN0966XXXXXXXXBACC63BP1
Ordering Information2 CN0966 B 10 S 05 P N - 000Series DesignationCN0966
Shell Size8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
ClassA - Anodized AluminumG - Cadmium/Nickel-Plated AluminumK - Stainless Steel Flame ResistantN - Electroless Nickel-Plated AluminumS - Stainless Steel
Order Code (Deviations)1
000 - Less Contacts100 - * See below200 - With Gold-Plated Contacts
Alternate Shell PositionsN, 6, 7, 8, 9, 10Per table on page 3-4
Contact StyleP - Pin InsertS - Socket Insert
Insert Arrangements(See page 3-4)
Notes:1 For Boeing Specification, see page 3-14.2 For modifications, classes, etc. not listed, consult factory.* Th’d: UNS-2A** Size 28 = 1.395 (35.434)* Former order code - 100 designated rhodium plated contacts
Series ModificationA - UngroundedB - Grounded (Conductive)
Dimensions
A B CShell + .005 (.127) Max. Dia. ThreadSize in mm in mm UNEF-2A
8 .835 21.209 .306 7.773 .500-2010 .972 23.698 .371 9.423 .625-2412 1.165 27.254 .547 13.894 .750-2014 1.230 30.124 .613 15.570 .875-2016 1.355 33.198 .758 19.253 1.000-2018 1.470 34.798 .865 21.971 1.0625-1820 1.607 38.100 .986 25.044 1.1875-1822 1.735 41.148 1.106 28.092 1.3125-1824 1.858 44.069 1.235 31.369 1.4375-1828 2.113 52.070 1.485 37.719 1.750-18*
1.345**(34.164)
Max.
360° LOCKINGACCESSORY TEETH
Size A±0.005 (0.127)
BMaximum Diameter
C Thread
in mm in mm UNEF-2A
8 0.835 21.209 0.306 7.773 0.500-20
10 0.972 23.698 0.371 9.423 0.625-24
12 1.165 27.254 0.547 13.894 0.750-20
14 1.230 30.124 0.613 15.570 0.875-20
16 1.355 33.198 0.758 19.253 1.000-20
18 1.470 34.798 0.865 21.971 1.0625-18
20 1.607 38.100 0.986 25.044 1.1875-18
22 1.735 41.148 1.106 28.092 1.3125-18
24 1.858 44.069 1.235 31.369 1.4375-18
28 2.113 52.070 1.485 37.719 1.750-18*
Ordering Information
Self-Locking Plug Connectors
17
CN0967 Series
Contact Style
P = PinS = Socket
Order Code
000 = Less contacts100 = *See below 200 = With gold-plated contact
Threaded CouplingCN0967XXXXXXXXBACC63BV1
3-16
3
Call Toll Free: 1 (800) 323-9612
CN0967 (C48 Series)Vibration-Resistant Receptacle
Threaded CouplingCN0967XXXXXXXXBACC63BV1
Dimensions
A B C D J LShell +.0045 (.114) +.005 (.127) Max. Max. Dia. Thread ThreadSize in mm in mm in mm in mm UNEF-2A UNEF-2A
8 .812 20.625 .594 15.088 .561 14.250 .328 8.331 .5265-24 .5000-2010 .937 23.800 .719 18.263 .696 14.250 .371 9.423 .6875-24 .6250-2412 1.031 26.187 .812 20.625 .875 17.679 .547 13.894 .8750-20 .7500-2014 1.125 28.575 .906 23.012 .935 22.225 .609 15.469 .9375-20 .8750-2016 1.250 31.750 .969 24.613 1.062 23.749 .758 19.253 1.0625-18 1.0000-2018 1.343 34.112 1.062 26.975 1.187 30.150 .865 21.971 1.1875-18 1.0625-1820 1.437 36.500 1.156 29.362 1.312 33.325 .986 25.044 1.3125-18 1.1875-1822 1.562 39.675 1.250 31.750 1.437 36.500 1.106 28.092 1.4375-18 1.3125-1824 1.703 43.256 1.375 34.925 1.562 39.675 1.235 31.369 1.5625-18 1.4375-1828 2.000 50.800 1.562 39.675 1.810 45.976 1.485 37.719 1.8125-16 1.750-18*
Ordering Information2
CN0967 C 10 S 05 P N - 000Series DesignationCN0967
Shell Size8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Environmental ClassA - Anodized AluminumG - Cadmium/Nickel-Plated AluminumK - Stainless Steel, Flame ResistantN - Electroless Nickel-Plated AluminumS - Stainless Steel
Order Code (Deviations)000 - Less Contacts100 - * See below200 - With Gold-Plated Contacts
Alternate Shell PositionN, 6, 7, 8, 9, 10Per table on page 3-4.
Contact StyleP - Pin S - Socket Insert Arrangements(See page 3-4)
Series ModificationC - Square-Flange MountG - Square-Flange with Clinch Nuts
1.407**(35.738)
Max.
NOTES:1 For Boeing Specification, see page 3-14.2 For modifications, classes, etc., not listed, consult factory.• For mounting hole dimensions, see page 3-20.* Th’d: UNS-2A**Size 28 = 1.457 (37.008)* Former order code - 100 designated rhodium plated contacts
360° LOCKINGACCESSORY TEETH
Size A±0.0045 (0.114)
B±0.005 (0.127)
CMaximum
DMaximum
J Thread
L Thread
in mm in mm in mm in mm UNEF-2A UNEF-2A
8 0.812 20.625 0.594 15.088 0.561 14.250 0.328 8.331 0.5265-24 0.5000-20
10 0.937 23.800 0.719 18.263 0.696 14.250 0.371 9.423 0.6875-24 0.6250-24
12 1.031 26.187 0.812 20.625 0.875 17.679 0.547 13.894 0.8750-20 0.7500-20
14 1.125 28.575 0.906 23.012 0.935 22.225 0.609 15.469 0.9375-20 0.8750-20
16 1.250 31.750 0.969 24.613 1.062 23.749 0.758 19.253 1.0625-18 1.0000-20
18 1.343 34.112 1.062 26.975 1.187 30.150 0.865 21.971 1.875-18 1.0625-18
20 1.437 36.500 1.156 29.362 1.312 33.325 0.986 25.044 1.3125-18 1.1875-18
22 1.562 39.675 1.250 31.750 1.437 36.500 1.106 28.092 1.4375-18 1.3125-18
24 1.703 43.256 1.375 34.925 1.562 39.675 1.235 31.369 1.5625-18 1.4375-18
28 2.000 50.800 1.562 39.675 1.810 45.976 1.485 37.719 1.8125-16 1.750-18*
NOTES:NOTES:
1 1 For modifications, classes, etc., not listed, consult factory For modifications, classes, etc., not listed, consult factory • For mounting hole dimensions, see page 21• For mounting hole dimensions, see page 21 * Th’d: UNS-2A * Th’d: UNS-2A **Size 28 = 1.457 (37.008) **Size 28 = 1.457 (37.008) * Former order code - 100 designated rhodium plated contacts* Former order code - 100 designated rhodium plated contacts
Series Modification
C = Square-flange mountG = Square-flange with clinch nuts
Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Contact Style
P = PinS = Socket
Insert Arrangements
See page 5
Alternate Shell Positions
N, 6, 7, 8, 9, 10 See table 4, table 1
Series Designation
Class
A = Anodized aluminumG = Cadmium/nickel-plated aluminumK = Stainless steel flame resistantN = Electroless nickel-plated aluminumS = Stainless steel
Order Code
000 = Less contacts100 = *See below 200 = With gold-plated contact
CN0967 C 10 S 05 P N - 000
Ordering Information
Vibration-Resistant Receptacle
18
CN1020 Series
Bayonet CouplingCN1020-XXXXXXXXBACC63CB1
3-17
3
Call Toll Free: 1 (800) 323-9612
CN1020 Series (C48 Family)Vibration-Proof Plug Connector
Bayonet CouplingCN1020-XXXXXXXXBACC63CB1
Ordering Information2 CN1020 A 10 G 05 P N - 000Series DesignationCN1020
Shell Size8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Environmental ClassA - Anodized AluminumG - Cadmium//Nickel-Plated Aluminum
Order Code (Deviations)1
000 - Less Contacts100 - * See below200 - With Gold-Plated ContactsAlternate Shell PositionsN, 6, 7, 8, 9, 10Per table on page 3-4.
Contact StyleP - Pin S - Socket
Insert Arrangements(See page 3-4)
Notes:1 For Boeing Specification, see page 3-14.2 For modification, classes, etc., not listed, consult factory.* Th’d: UNS-2A** Size 28 = 1.395 (35.434)* Former order code - 100 designated rhodium plated contacts
Series ModificationA - Standard Plug
Dimensions
A B CShell + .005 (.127) Max. Dia. ThreadSize in mm in mm UNEF-2A
8 .765 19.447 .306 7.773 .500-2010 .967 24.561 .371 9.423 .625-2412 1.078 27.381 .547 13.894 .750-2014 1.187 30.149 .613 15.570 .875-2016 1.309 33.248 .758 19.253 1.000-2018 1.375 34.925 .865 21.971 1.0625-1820 1.505 38.227 .986 25.044 1.1875-1822 1.625 41.275 1.106 28.092 1.3125-1824 1.755 44.577 1.235 31.369 1.4375-1828 2.161 54.889 1.485 37.719 1.750-18*
1.345* *(34.164)
Max.
360° LOCKINGACCESSORY TEETH
Size A±0.005 (0.127)
BMaximum Diameter
C Thread
in mm in mm UNEF-2A
8 0.765 19.447 0.306 7.773 0.500-20
10 0.967 24.561 0.371 9.423 0.625-24
12 1.078 27.381 0.547 13.894 0.750-20
14 1.187 30.149 0.613 15.570 0.875-20
16 1.309 33.248 0.758 19.253 1.000-20
18 1.375 34.925 0.865 21.971 1.0625-18
20 1.505 38.227 0.986 25.044 1.1875-18
22 1.625 41.275 1.106 28.092 1.3125-18
24 1.755 44.577 1.235 31.369 1.4375-18
28 2.161 54.889 1.485 37.719 1.750-18*
NOTES:NOTES:
11 For modifications, classes, etc., not listed, consult factory For modifications, classes, etc., not listed, consult factory • For mounting hole dimensions, see page 21 • For mounting hole dimensions, see page 21 * Th’d: UNS-2A * Th’d: UNS-2A **Size 28 = 1.395 (35.434) **Size 28 = 1.395 (35.434) * Former order code - 100 designated rhodium plated contacts* Former order code - 100 designated rhodium plated contacts
Series Modification
A = Standard plug
Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Contact Style
P = PinS = Socket
Insert Arrangements
See page 5
Alternate Shell Positions
N, 6, 7, 8, 9, 10 See page 4, table 1
Series Designation
Class
A = Anodized aluminumG = Cadmium/nickel-plated aluminum
Order Code
000 = Less contacts100 = *See below 200 = With gold-plated contact
CN1020 A 10 G 05 P N - 000Ordering Information
Vibration-Proof Plug Connector
19
CN1021 Series
Bayonet CouplingCN1021XXXXXXXXBACC63CC1
3-18
3
Call Toll Free: 1 (800) 323-9612
CN1021 Series (C48 Family)Vibration-Resistant Receptacle
Bayonet CouplingCN1021XXXXXXXXBACC63CC1
Dimensions
A B C D LShell +.0045 (.114) +.005 (.127) Max. Max. Dia. ThreadSize in mm in mm in mm in mm UNEF-2A
8 .812 20.625 .594 15.088 .561 14.250 .328 8.331 .500-2010 .937 23.800 .719 18.263 .696 14.250 .371 9.423 .625-2412 1.031 26.187 .812 20.625 .875 17.679 .547 13.894 .750-2014 1.125 28.575 .906 23.012 .935 22.225 .609 15.469 .875-2016 1.250 31.750 .969 24.613 1.062 23.749 .758 19.253 1.000-2018 1.343 34.112 1.062 26.975 1.187 30.150 .865 21.971 1.0625-1820 1.437 36.500 1.156 29.362 1.312 33.325 .986 25.044 1.1875-1822 1.562 39.675 1.250 31.750 1.437 36.500 1.106 28.092 1.3125-1824 1.703 43.256 1.375 34.925 1.562 39.675 1.235 31.369 1.4375-1828 2.000 50.800 1.562 39.675 1.810 45.976 1.485 37.719 1.750-18*
CN1021 A 10 G 05 P N - 000
Series DesignationCN1021
Shell Size8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Environmental ClassA - Anodized AluminumG - Cadmium/Nickel-Plated Aluminum
Order Code (Deviations)000 - Less Contacts100 - * See below200 - With Gold-Plated Contacts
Alternate Shell PositionN, 6, 7, 8, 9, 10Per table on page 3-4.
Contact StyleP - Pin S - Socket Insert Arrangements(See page 3-4)
Notes:1 For Boeing Specification, see page 3-14.2 For modifications, classes, etc. not listed, consult factory.• For mounting hole dimensions, see page 3-20.* Th’d: UNS-2A** Size 28 = 1.457 (37.008)* Former order code - 100 designated rhodium plated contacts
Series ModificationA - Square-Flange MountC - Square-Flange with Clinch Nuts
Ordering Information2
1.407**(35.738)
Max.
360° LOCKINGACCESSORY TEETH
Size A±0.0045 (0.114)
B±0.005 (0.127)
CMaximum
DMaximum Diameter
L Thread
in mm in mm in mm in mm UNEF-2A
8 0.812 20.625 0.594 15.088 0.561 14.250 0.328 8.331 0.500-20
10 0.937 23.800 0.719 18.263 0.696 14.250 0.371 9.423 0.625-24
12 1.031 26.187 0.812 20.625 0.875 17.679 0.547 13.894 0.750-20
14 1.125 28.575 0.906 23.012 0.935 22.225 0.609 15.469 0.875-20
16 1.250 31.750 0.969 24.613 1.062 23.749 0.758 19.253 1.000-20
18 1.343 34.112 1.062 26.975 1.187 30.150 0.865 21.971 1.0625-18
20 1.437 36.500 1.156 29.362 1.312 33.325 0.986 25.044 1.1875-18
22 1.562 39.675 1.250 31.750 1.437 36.500 1.106 28.092 1.3125-18
24 1.703 43.256 1.375 34.925 1.562 39.675 1.235 31.369 1.4375-18
28 2.000 50.800 1.562 39.675 1.810 45.976 1.485 37.719 1.750-18*
Contact Style
P = PinS = Socket
NOTES:NOTES:
11 For modifications, classes, etc., not listed, consult factory For modifications, classes, etc., not listed, consult factory • For mounting hole dimensions, see page 21 • For mounting hole dimensions, see page 21 * Th’d: UNS-2A * Th’d: UNS-2A **Size 28 = 1.457 (37.008) **Size 28 = 1.457 (37.008) * Former order code - 100 designated rhodium plated contacts* Former order code - 100 designated rhodium plated contacts
Series Modification
A = Square-flange mountC = Square-flange with clinch nuts
Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28
Contact Style
P = PinS = Socket
Insert Arrangements
See page 5
Alternate Shell Positions
N, 6, 7, 8, 9, 10 See page 4, table 1
Series Designation
Class
A = Anodized aluminumG = Cadmium/nickel-plated aluminum
Order Code
000 = Less contacts100 = *See below 200 = With gold-plated contact
CN1021 A 10 G 05 P N - 000Ordering Information
Vibration-Resistant Receptacle
20
CN909A MMB Series
Shell Size
8, 10, 12, 14, 16, 18, 20, 22, 24
Contact Style
P = PinS = Socket
Insert Arrangements
See page 5
Alternate Shell Positions
N, 6, 7, 8, 9, 10 See page 4, table 1
Series Designation
Class
(Dash) = Anodized aluminumE = Cadmium/nickel-plated aluminumN = Nickel-plated aluminum
Order Code
202 = with gold-plated contacts*106 = Less contacts
C0909A 10 - 05 P 8 - XXXOrdering Information
NOTES:NOTES:
11 For deviations, classes, etc. not listed, consult factory For deviations, classes, etc. not listed, consult factory * Former order code - 102 designated rhodium plated contacts* Former order code - 102 designated rhodium plated contacts
Vibration-Proof Plug Connector
Bayonet CouplingCN909AXXXXXXXBACC63BN1
3-19
3
Call Toll Free: 1 (800) 323-9612
C0909A MMB Series (C48 Family)Vibration-Proof Plug Connector
Dimensions
A B C DShell Dia. Dia. Max. ThreadSize in mm in mm in mm UNEF-2A
8 .328 8.331 .437 11.100 .766 19.456 .437-2810 .420 10.668 .562 14.275 .906 23.012 .562-2412 .580 14.732 .750 19.050 1.078 27.381 .750-2014 .664 16.866 .812 20.625 1.141 28.981 .812-2016 .769 19.533 .938 23.825 1.266 32.156 .937-2018 .902 22.911 1.062 26.975 1.375 34.925 1.062-1820 1.033 26.238 1.182 30.023 1.510 38.354 1.187-1822 1.152 29.261 1.312 33.325 1.625 41.275 1.312.1824 1.282 32.253 1.432 36.373 1.760 44.704 1.437-18
Ordering Information2 C0909A 10 - 05 P 8 - XXX
Series DesignationC0909A
Shell Size8, 10, 12, 14, 16, 18, 20, 22, 24
Class(Dash) - Anodized AluminumE - Cadmium/Nickel-Plated AluminumN - Nickel-Plated Aluminum
Order Code (Deviations)202 - With Gold-Plated Contacts*106 - Less Contacts
Alternate Shell PositionsN, 6, 7, 8, 9, 10Per table on page 3-4.Contact StyleP - Pin InsertS - Socket InsertInsert Arrangements(See page 3-4)
Notes:1 For Boeing Specification, see page 3-14.2 For deviations, classes, etc. not listed, consult factory.* Former order code - 102 designated rhodium plated contacts
Bayonet CouplingC0909AXXXXXXXBACC63BN1
1.345(34.164)
Max.
Size A Diameter
B Diameter
C Maximum
D Thread
in mm in mm in mm UNEF-2A
8 0.328 8.331 0.437 11.100 0.766 19.456 0.437-28
10 0.420 10.668 0.562 14.275 0.906 23.012 0.562-24
12 0.580 14.732 0.750 19.050 1.078 27.381 0.750-20
14 0.664 16.866 0.812 20.625 1.141 28.981 0.812-20
16 0.769 19.533 0.938 23.825 1.266 32.156 0.937-20
18 0.902 22.911 1.062 26.975 1.375 34.925 1.062-18
20 1.033 26.238 1.182 30.023 1.510 38.354 1.187-18
22 1.152 29.261 1.312 33.325 1.625 41.275 1.312-18
24 1.282 32.253 1.432 36.373 1.760 44.704 1.437-18
21
C48 Series & C48 Family
Contact Style
P = PinS = Socket
Square-Flange Mount
3-20
3
Call Toll Free: 1 (800) 323-9612
Single-Hole Mount(Jam-Nut Mount)
Dimensions
M N G H KShell Min. Min. +.005 (.127) +.005 (.127) +.005 (.127)Size in mm in mm in mm in mm in mm
8 .620 15.748 .447 11.354 .605 15.638 .635 16.129 .594 15.08810 .748 18.999 .572 14.529 .730 18.542 .760 19.304 .719 18.26312 .913 23.190 .760 19.304 .917 23.292 .947 24.054 .812 20.62514 .980 24.892 .822 20.879 .980 24.892 1.010 25.654 .906 23.01316 1.107 28.119 .948 24.079 1.105 28.067 1.135 28.829 .969 24.61318 1.209 30.709 1.072 27.229 1.225 31.115 1.260 32.004 1.062 26.97520 1.337 33.906 1.192 30.277 1.350 34.290 1.385 35.179 1.156 29.36322 1.452 36.881 1.322 33.579 1.475 37.465 1.510 38.354 1.250 31.75024 1.577 40.056 1.442 36.627 1.600 40.640 1.635 41.529 1.375 34.92528 1.827 46.406 1.760 44.704 1.856 47.143 1.885 47.879 1.562 39.675
Recommended Minimum Torque for Jam Nut
Shell Size 8 10 12 14 16 18 20 22 24Torque (Inch/lb.) 28 36 56 64.5 69 81 102 122.5 144
C48 Series & C48 FamilyMounting Panel Data
Square-Flange Mount
Single-Hole Mount (Jam-Nut Mount)
Size
MMinimum
NMinimum
G±0.005 (0.127)
H±0.005 (0.127)
K±0.005 (0.127)
in mm in mm in mm in mm in mm
8 0.620 15.748 0.447 11.354 0.605 15.638 0.635 16.129 0.594 15.088
10 0.748 18.999 0.572 14.529 0.730 18.542 0.760 19.304 0.719 18.263
12 0.913 23.190 0.760 19.304 0.917 23.292 0.947 24.054 0.812 20.625
14 0.980 24.892 0.822 20.879 0.980 24.892 1.010 25.654 0.906 23.013
16 1.107 28.119 0.948 24.079 1.105 28.067 1.135 28.829 0.969 24.613
18 1.209 30.709 1.072 27.229 1.225 31.115 1.260 32.004 1.062 26.975
20 1.337 33.906 1.192 30.277 1.350 34.290 1.385 35.179 1.156 29.363
22 1.452 36.881 1.322 33.579 1.475 37.465 1.510 38.354 1.250 31.750
24 1.577 40.056 1.442 36.627 1.600 40.640 1.635 41.529 1.375 34.925
28 1.827 46.406 1.760 44.704 1.856 47.143 1.885 47.879 1.562 39.675
Shell Size 8 10 12 14 16 18 20 22 24
Torque (inch/lb) 28 36 56 64.5 69 81 102 122.5 144
Recommended Minimum Torque for Jam Nut
Mounting Panel Data
3-20
3
Call Toll Free: 1 (800) 323-9612
Single-Hole Mount(Jam-Nut Mount)
Dimensions
M N G H KShell Min. Min. +.005 (.127) +.005 (.127) +.005 (.127)Size in mm in mm in mm in mm in mm
8 .620 15.748 .447 11.354 .605 15.638 .635 16.129 .594 15.08810 .748 18.999 .572 14.529 .730 18.542 .760 19.304 .719 18.26312 .913 23.190 .760 19.304 .917 23.292 .947 24.054 .812 20.62514 .980 24.892 .822 20.879 .980 24.892 1.010 25.654 .906 23.01316 1.107 28.119 .948 24.079 1.105 28.067 1.135 28.829 .969 24.61318 1.209 30.709 1.072 27.229 1.225 31.115 1.260 32.004 1.062 26.97520 1.337 33.906 1.192 30.277 1.350 34.290 1.385 35.179 1.156 29.36322 1.452 36.881 1.322 33.579 1.475 37.465 1.510 38.354 1.250 31.75024 1.577 40.056 1.442 36.627 1.600 40.640 1.635 41.529 1.375 34.92528 1.827 46.406 1.760 44.704 1.856 47.143 1.885 47.879 1.562 39.675
Recommended Minimum Torque for Jam Nut
Shell Size 8 10 12 14 16 18 20 22 24Torque (Inch/lb.) 28 36 56 64.5 69 81 102 122.5 144
C48 Series & C48 FamilyMounting Panel Data
Square-Flange Mount
For more information, please contact us:
North America+1 507.833.8822
Asia-Pacific+86 21 5442 7668
Europe, Middle East+44 (0) 1245 342060
belfuse.com/cinch.com
About Cinch Connectivity Solutions
For over 100 years, Cinch Connectivity Solutions has manufactured high-quality and reliable high-performance connectors and cable assemblies. Cinch is recognized as a world class connectivity supplier of RF, fiber optic, hybrid, microwave components, circular, d-subminiatures, modular rectangular, electronic enclosures and cable assemblies.
Cinch provides innovative solutions to the military, commercial aerospace, networking, telecommunication, test and measurement, oil and gas and other harsh environment industries.
ca-ccs-omega-catalog-01152020© 2020 Cinch Connectivity Solutions
