Oilfield & Heavy Equipment For Sale At Auction! - OKLAHOMA … · 2019. 11. 19. · Well Control Equipment Casing & Drill Pipe Handling Tools Auxiliary Equipment Yard 5 Auxiliary

OKLAHOMA CITY, OKTUESDAY/WEDNESDAY

NOVEMBER 12th/13th, 20199:00AM (CST) EACH DAY

AUCTION SALE SITE

Embassy Suites - Airport 1815 S Meridian Ave

(405) 682-6000

NOTE: Please read all “Bidding Terms & Conditions” of this auction, located in the back of this catalog and become familiar with them before bidding on any lots.

UPCOMING AUCTIONS

ODESSA, TX DECEMBER 12th, 2019Complete Liquidation of Capstar Drilling - Permian Basin Div.

OKLAHOMA CITY, OK JANUARY - TBD Drilling Rigs & Related Components

YARD LOCATIONS/CHECKOUT

YARD #1 - OKLAHOMA CITY, OK

ADDRESS: Superior Energy Auctioneers’ Yard @ Will Rogers Industrial Park, 7501 SW 29th St, 73179CHECKOUT: Thru Nov 29th, Mon-Sat (8-5) – NOT INCLUDING SUNDAYS or THANKSGIVINGCONTACT: Todd Sorrels @ 405-397-9914 15,000# Forklift Available For Hire

Inspect Equipment Prior to Bidding

YARD #2 - ODESSA, TX

ADDRESS: Superior Energy Auctioneers’ Yard @ 11611 CR 128 West, 79765CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) \ – NOT INCLUDING THANKSGIVING WEEKCONTACT: Mitchell Long @ (432) 661-4414 or Josh Casteel @ (432) 631-3575

YARD #3 - KILGORE, TX

ADDRESS / DIRECTIONS: 3616 River Road, 75662. From I-20 Near Kilgore, TX, Take Exit #587, Turn North on Hwy 42, Go 0.2 Mile to Traffic Light, Turn Left on FM1252, Go 0.7 Mile to River Road, Turn Right & Go 0.1 Mile To Yard on Left.CHECKOUT: Nov 15th thru Nov 29th, Mon-Fri (8 to 4) – NO WEEKENDS, UNLESS BY APPOINTMENT – NO CHECKOUT THURSDAY NOV 28thCONTACT: Kyle Modisette @ (903) 522-1689

YARD #4 - SIBLEY, LA

ADDRESS: 130 Corporate Dr, 71073CHECKOUT: Thru Nov 29th, Mon-Fri (8-5) – BY APPOINTMENT ONLYCONTACT: Brad Dick @ (318) 453-7746

YARD #5 - TOMBALL, TX

ADDRESS: Challenger Equipment @ 12814 Old Boudreaux Lane, 77375CHECKOUT: Thru Dec 6th, Mon-Fri (8 to 5) – NOT INCLUDING THANKSGIVING WEEK, SAT-URDAYS BY APPOINTMENT ONLYCONTACT: Wayne Hawkins @ (281) 351-4247 Tel & Fax or (713) 882-7594 Cell NOTE: No Charge For Loadouts, Drivers Must Sign-In At Office

YARD #6 - BROOKSHIRE, TX

ADDRESS / DIRECTIONS: 1211 Seidel Road, 77423. From Houston, TX Go West on I-10 to Exit #730 (Peach Ridge Road). Continue West on Service Road to the Brazos River. Turn Left Under I-10 & Stay Straight on Seidel Road For Approximately 1.0 Mile To Yard On Left.CHECKOUT: Thru Nov 29th, Mon-Fri (8-5) – BY APPOINTMENT ONLYCONTACT: John Fantuzzo @ (361) 244-4494

YARD #7 - LINDSAY, OK

ADDRESS: 14272 ECR 1558, 73052CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) – BY APPOINTMENT ONLY – NOT INCLUDING THANKSGIVING WEEKCONTACT: Nathaniel @ (405) 428-0740

YARD #9 - SWEETWATER, TX

ADDRESS: STRC Oilfield Technology @ 3401 S. IH 20, 79556CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) – BY APPOINTMENT ONLY – NOT INCLUDING THANKSGIVING WEEKCONTACT: Wendell Manley @ (575) 748-4777

YARD #10 - KNOX CITY, TX

ADDRESS: STRC Oilfield Technology @ 2201 State Hwy 222 E, 79529CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) – BY APPOINTMENT ONLY – NOT INCLUDING THANKSGIVING WEEKCONTACT: Orrin Myers @ (940) 256-3743 or David Leija’s Cell @ (940) 256-2386

YARD #11 - BOWIE, TX

ADDRESS: STRC Oilfield Technology @ 3043 Hwy 59 North, 76230CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) – BY APPOINTMENT ONLY – NOT INCLUDING THANKSGIVING WEEKCONTACT: Junior Ingram @ (940) 531-8535

YARD #12 - MIDLAND, TX

DIRECTIONS: 3213 E County Rd 44, 79705. Turn Right Before Groves International, Then Proceed on Road To Equipment On Right.CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) – BY APPOINTMENT ONLY – NOT INCLUDING THANKSGIVINGCONTACT: Raymond @ (432) 250-3276 or Stan @ (432) 813-6411

YARD #13 - ROOSEVELT, UT

ADDRESS: 4019 E Hwy 40, 84066CHECKOUT: Thru Dec 6th, Mon-Fri (8-4) – BY APPOINTMENT ONLY – NOT INCLUDING THANKSGIVINGCONTACT: Yard Manager @ (719) 257-8586

YARD #14 - NEWCOMERSTOWN, OH

ADDRESS: 401 Enterprise Dr, 43832 CHECKOUT: Thru Nov 27th, Mon-Fri (8-5) – NOT INCLUDING WEEKENDSCONTACT: Jason Hatfield @ (330) 925-1000

YARD #15 - EUREKA, TX

ADDRESS / DIRECTIONS: 195 Grand View Dr, 75109. From I-45 & Hwy 287 (Exit #229), Go South on Hwy 287 13-Miles to Grand View & Go Right for 1/4-Mile to Yard on Right.CHECKOUT: Thru Nov 29th, Mon-Fri (8-5) – NOT INCLUDING WEEKENDS & THANKSGIVINGCONTACT: Spence Hummel @ (918) 630-2148

YARD #16 - MIDKIFF, TX

DIRECTIONS: From the Intersection of IH-20 & TX-158 (Exit # 138) in Midland. Travel East on TX-158 f/ 20.2 Miles To TX-137. Go South or Right on TX-137 12.8 Miles to CR-180. Turn Right on Hwy CR-180 for 2.5 Miles to Yard on Right.CHECKOUT: Thru Nov 27th, Mon-Fri (8-5) – BY APPOINTMENT ONLY – NOT INCLUDING WEEKENDSCONTACT: Eric Heaton @ (325) 450-4052

YARD #17 - WOODWARD, OK

ADDRESS: Corner of Hwy 270 & Anderson Rd, 73801CHECKOUT: Thru Nov 29th, Mon-Fri (8-5) – NOT INCLUDING WEEKENDS & THANKSGIVINGCONTACT: Spence Hummel @ (918) 630-2148

YARD #18 - SASAKWA, OK

ADDRESS / DIRECTIONS: John L Lewis Well Service @ 14342 NS 365 Rd, 74867. From the R/R Tracks in Sasakwa Go East on Hwy 56 4/10-Mile & Go Right on EW-1425 for 4/10-Mile & Go Right 2/10 Mile to Yard on Left.CHECKOUT: Thru Nov 27th, Mon-Sat (8-5)CONTACT: John L Lewis @ (580) 320-5531

YARD #19 - PIEDMONT, OK

ADDRESS: 15190 NW Expressway, 73078 CHECKOUT: Thru Nov 27th, Mon-Fri (8-5) – NOT INCLUDING WEEKENDSCONTACT: Robert Luther @ (405) 613-1142

Baker Energy Solutions, Justin Baker @ (405) 833-2688

Randy Baker Trucking @ (405) 642-2782

HEI Trucking, Johnny Pettigrew @ (405) 596-8371

Well Completions, Rodney Evans @ (918) 647-1926

Edge Services, Allen Rickers @ (580) 216-3087

Patterson Motor Freight, Dwight Patterson @ (281) 456-0077

Wagoneers Trucking @ (918) 437-1192

Gilbert & Sons Trucking, Don @ (405) 275-4549

Benchmark Logistics, Kelly Branson @ (405) 618-0001

Stevens Trucking @ (405) 745-2363

Big Iron Trucking @ (405) 756-7909

Deepwell Energy @ (405) 745-3479

Lanes Motor Freight @ (580) 256-5063

AIMS Global Logistics @ (713) 489-8911

ABA Trucking, Bo Mathis @ (918) 448-5092 or (405) 882-1160

Meadow Lark (Slick Backs Only), Marlin Harbour @ (940) 704-1202

NW Logistics @ (405) 506-1850

J&B Heavy Haul @ (405) 702-8890

Gryphon Global Transport @ (405) 478-5934

TRUCKING COMPANIES

A 5% Administrative Fee Will Be Charged On All Purchases, 8% For Online Bidders

TABLE OF CONTENTS

Generators/Forklifts / Light Trailers

Trucks / Vacuum Trucks / Trailers

Crane Trucks / Crane

Blenders / Hydration Unit / Cement Trailers

Chemical Equipment

Frac Pumps / Dbl Pumpers / Blenders

Sand Conveyors / Storage Trailers

Parts Houses / Cement & Acid Trailers

Wireline Truck

Snubbing Units

Swab Unit

Well Service Rigs

Power Swivels & Pumps

Mud Mixing Tanks & Plants

Washpipe & Sand Screens

Tubing / Drill Pipe / Collars

Well Service BOP’s

Fishing & Rental Tools

Well Servicing Tools

Workover & Drilling Bits

Lot 1

Lot 20

Lot 47

Lot 82

Lot 125

Lot 131

Lot 145

Lot 177

Lot 194

Lot 195

Lot 202

Lot 203

Lot 246

Lot 268

Lot 277

Lot 281

Lot 403

Lot 461

Lot 544

Lot 813

DAY 1

Real Estate (To Be Offered @ 12:00 Noon)

Shop & Construction Equipment

Cementing Unit

Air Compressors / Foam Unit / Nitrogen Equip

Trucks & Trailers

Drilling Components

Partial Rig

Drill Pipe & Collars

Well Control Equipment

Casing & Drill Pipe Handling Tools

Auxiliary Equipment Yard 5







Production Equipment

Reamers/Bit Breakers / Lift Nubbins

Lot 2000

Lot 901

Lot 936

Lot 937

Lot 949

Lot 1010

Lot 1059

Lot 1062

Lot 1352

Lot 1402

Lot 1524

Lot 1570

Lot 1619

Lot 1633

Lot 1643

Lot 1649

Lot 1667

Lot 1691

Lot 1753

DAY 2

PatrickPerryman

Typewritten Text

SUPERIOR ENERGY AUCTIONEERS, LPOKLAHOMA CITY, OK

NOVEMBER 12 & 13, 2019Loc Lot# Unit# Price Buyer

REAL ESTATE

_______ _______ _______2 BN 2000 Real Estate To Be Offered @

12:00 Noon: 7917 North CountyRoad West, Odessa, TX 7974. (BRITT TRUCKING Yard). 8+/-Acres w/Caliche Base, 2000'Chain Link Fence w/30' SideGate Entrance, 7000 Sq FtBuilding, 260 Sq Ft Officew/Bathroom, 760 Sq Ft BreakRoom w/Bathroom, 700 Sq FtParts Room, 4600 Sq Ft 4-BayShop w/12' x 16' OutdoorCovered Shed, 2-Acre ParkingArea. Subject to Owner'sConfirmation, 10% DownRequired Day of Sale, BuyerPays All Closing Costs &Closing to Occur in 30 Days.

ii



BEGIN DAY TWO

_______ _______ _______18 CK 900 (x) 1999 CHEVROLET 1500

Rockwood Express Van, VIN-1GBFG15R6X1092100, p/b V-8Gas Eng, Auto Trans, PW, PL,PS, Customized w/BRAUN ElecHandicap Chair Lift

_______ _______ _______18 CK 901 JOHN DEERE 3235A Reel Mover

p/b JOHN DEERE 3-Cyl Diesel(1786 Hours) w/(5) 22" Cutters,26.5x14-12 NHS Front &20x10.00-8NHS Rear Tires

_______ _______ _______18 CK 902 DITCH WITCH 5110DD Rubber

Tired Trencher, s/N-5L0559, p/bDEUTZ F3L912 Diesel Eng w/8'Rock Boom, A420BH Backhoew/20" Bucket, Back Fill Blade,31x15.50x15NHS Tires

_______ _______ _______18 CK 903 DUPLIKAT D3L Farm Tractor,

S/N-SP200AD09, p/b DEUTZF4L912 Air-Cooled Diesel Engw/PTO, 3-Pt Hitch, 10.00-16SLMulti-Rib Front & 16.9-30 TractorRear Tires & KING KUTTER 60"Bush Hog

_______ _______ _______18 CK 904 HYSTER H155XL Forklift p/b

PERKINS 4-Cyl Diesel Eng, 5' x5' Forks

1



_______ _______ _______2 GP 905 (9) McKISSICK 459 Guyline 10-

Ton 2-Sheave Blocks (UNUSED)

_______ _______ _______2 GP 906 (9) McKISSICK 458 Guyline 5-

Ton 6" Sheave Blocks (UNUSED)

_______ _______ _______2 GP 907 (x) CM 1-1/2-Ton Chain Hoists

_______ _______ _______2 GP 908 (x) CM 1-1/2-Ton Chain Hoists

_______ _______ _______1 AC 909 LINCOLN R3R-300 DC Arc

Welder, S/N-AC519316, 480-Volt,3-Phase

_______ _______ _______2 GP 910 WACKER NEUSON Transfer

Pump p/b KOHLER KD625-3 3-Cyl Eng, Mtd on S/A Bumper PullTrailer(NOTE: BILL OF SALE ONLY)

_______ _______ _______2 BB 911 (x) Suction/Discharge Trailer

w/MISSION MagnumSandmaster 10 x 8 Cent Pumpp/b VOLVO 6-Cyl Diesel Engw/TWIN DISC SP311P2 Trans, AllMtd on T/A Pintle Hitch Trailer,VIN-11785 (1520181)

2



_______ _______ _______2 BB 912 (x) Frac Pump Parts 14 x 12

Transfer Pump p/b DETROITSeries 60 Diesel Eng w/TorqueConverter, All Mtd on 2011MERTZ T/A Trailer, VIN-1M91P3029BA211565,w/Manifold, Landing Gear,Kingpin (151303)

_______ _______ _______2 GP 913 WHEELABRATOR Sand Blaster,

S/N-A122863, w/Elec Motor,Breaker Box, Control Panel

_______ _______ _______1 CE 914 DGSNR 6KW Silent Gen p/b 4-

Stroke Air-Cooled Diesel Engw/Elec Starter & Controls

_______ _______ _______15 AG 915 (15-17) EAGLE 8500 Watt

Portable Gen p/b Diesel Eng(UNUSED)

_______ _______ _______18 CK 916 LINCOLN SA-250 Welding

Machine p/b 3-Cyl Diesel Eng,Cutting Torch & Toolbox, on 15'T/A Bumper Hitch Trailer w/16"Tires (Note: Bottles Do Not Go)(NOTE: BILL OF SALE ONLY)

3



_______ _______ _______1 AT 917 MAGNAPLUS 363PSL1607

140KW AC Gen, S/N-LM3744570802, p/b BF4M DieselEng w/Elec Starter, Radiator &Controls, 500-Gal Day Tank,Breaker Panel, All Mtd onFABRIQUE T/A BH Trailer, VIN-520BP202XCP003481, w/LandingGear, ST235/80R16 Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______1 AI 918 2010 JOHN DEERE 710J 4-WD

Backhoe/Loader, S/N-1T0710JXCA0181997, w/Bucket,Outriggers, Enclosed Cab (568Hours)

_______ _______ _______2 AL 919 2001 CAT IT28G Wheel Loader,

S/N-CATIT28GP8CR003374,w/6'L Forks, Enclosed Cab,Quick Attach Coupling

_______ _______ _______12 GP 920 (12-12) TEREX 72-51 Front End

Loader, S/N-57307, p/b DETROIT6-71 Diesel Eng, ROPS, 10'Forks

_______ _______ _______12 GP 921 (12-35) TAYLOR Y-24BWO Stiff

Mast Forklift, S/N-5004P8512,w/24,000# Lift Capacity p/bDETROIT Diesel Eng

4



_______ _______ _______1 CE 922 (x) 2007 IHC 4100 SBA 4x2 S/A

Dually 1-Ton Knuckle BoomBucket Truck f/Pumping UnitService, VIN-3HTMWAFK97N462348, p/b IHCVT-365 Diesel Eng, Auto Trans,PTO, Hydraulics, ETI ETC3TIHyd Bucket Boom, (2) HydOutriggers, ETI 12-Comp ServiceBed, (2) Spools of WeldingLeads, Air Compressor p/bHONDA GX-160 Gas Eng, AirTank, Air Operated GreasePump, Hose Reels, 225/70R19.5Tires (139,193 Miles)

_______ _______ _______1 CE 923 Asst'd Hammer, Pipe & Crescent

Wrenches, VICTOR Torch,Gauges & Hoses, Die Grinder,Socket Set & Misc Tools

_______ _______ _______1 AB 924 (x) 1999 IHC Navistar 4900 4x2

S/A Mechanic's Service Truck,VIN-1HTSDADN3XH621224, 188"WB p/b IHC 530E Diesel Eng,Auto Trans, TURNER 10-Compw/LIFTMORE 3200 ElecHoist/Stringer Crane w/RemoteControls, Pilot Lights, 11R22.5Tires, All Alum Budds

5



_______ _______ _______18 CK 925 (x) 1986 IHC 2375 (S2300) S/A

Dually Service Truck, VIN-1HSZDGFNXGHB18845, 221"WB p/b CUMMINS L-10 DieselEng, FULLER 13-Spd Trans,Sleeper Cab, 10-Comp Bedw/AUTOCRANE Hoist/Stinger,Air Compressor w/o Motor, (2)HC Outriggers, HD Bumperw/Vises, 11R22.5 Tires, All AlumBudds

_______ _______ _______18 CK 926 (x) 1986 IHC 1954 S/A Truck

w/Alum Pipe Laying & TestingMachine, VIN-1HTLDTVN5GH40437, 218" WBp/b IHC DT-466 Diesel Eng, 5-Spd w/2-Spd Rear Axle, PTO,Hyd Pump w/Hyd AdjustableHeight Work Platform, (4) HandCrank Leveling Jacks, (2) LPGTanks

_______ _______ _______18 CK 927 (x) 1975 IHC Paystar 5000 (F-

5070) T/A Dump Truck, VIN-A5057EGB17573, 184" WB p/bCUMMINS NTC-290 Diesel Eng,MORSE 4-Spd Main & 4-Spd AuxTrans, PTO, Hyd Pump, Approx10-Yd Hyd Dump Bed, 395/85R20Front & 11R-24.5 Rear Tires

_______ _______ _______18 CK 928 (x) 1976 PETERBILT 359S T/A

Dump Truck, VIN-77656P, p/bDiesel Eng, FULLER 10-SpdTrans, PTO, 34,000# Rears,Approx 10-Yd Dump Body, 22.5's

6



_______ _______ _______18 CK 929 (x) 1980 IHC 2275 T/A Dump

Truck, VIN-DA227KGB11955, p/bCUMMINS NTC-350 Diesel Eng,FULLER RTO-9513 13-SpdTrans, PTO, Hyd Pump, TIMPTE14x7 10.5-Yd Dump Bed,11R22.5's

_______ _______ _______18 CK 930 (x) 1952 OSHKOSH W-712 S/A

Dump Truck, VIN-4325R, 4-WDp/b CAT 3306 Diesel Eng, 5-SpdTrans, Dropbox, HEIL 5-YdDump Body, Hyd Dump Cyl,12.00x20 Tires

_______ _______ _______18 CK 931 Shopbuilt 32'OAL T/A Equipment

Trailer w/9' Neck, 23' DovetailBed, Ramps, Hand CrankLanding Gear, 9.00-015LT Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______18 CK 932 (x) 1997 NATIONAL 30'OAL T/A

Dovetail Equipment Trailer, VIN-1N9FP252XVK008503, w/8'4"W x25'L Bed, Folding Ramps, PintleHitch, ST235/85R16 Tires, DualWheels

_______ _______ _______18 CK 933 Shopbuilt 26'OAL T/A

Gooseneck Trailer w/8'W x 17'Bed, 16" Tires(NOTE: BILL OF SALE ONLY)

7



_______ _______ _______18 CK 935 ANDERSON 36'OAL T/A

Equipment Trailer w/8'W x 30'LDovetail Bed, Folding Ramps,Pintle Hitch, 16" Tires(NOTE: BILL OF SALE ONLY)

8



CEMENTING UNIT

_______ _______ _______12 GP 936 (12-6) Cement Mixing Trailer

w/PINION B550 Triplex pump p/bDETROIT 16V-71 Diesel Eng,ALLISON HT750 Trans, 1500-GalTanks, Cement Hopper, All Mtdon T/A Utility Flatbed Trailer, VIN-1UYFS2482RA036801, w/11R24.5Tires(NOTE: BILL OF SALE ONLY)

9



AIR COMPRESSORS/FOAM UNIT/NITROGEN EQUIP

_______ _______ _______14 BX 937 (14-0) Elec Air Package w/VFD

House, Lots 938 thru 944 (Note:The Package Will be SoldSubject to Owner'sConfirmation)

_______ _______ _______14 BX 938 (14-1) 2014 SULLAIR 1350/500

20/12 Air Compressor, S/N-201305210057, p/b BALDOR600HP 1790RPM Elec Motorw/575-Volt Starter Box,MURUPHY Gauge Panel,MESABI Heat Exchangers, (2) 3"1502 Hardlines, Elec Cable, Mtdon Covered Sid (2357 MeteredHours)

_______ _______ _______14 BX 939 (14-2) 2014 SULLAIR 1350/500


10



_______ _______ _______14 BX 940 (14-3) 2014 SULLAIR 1350/500


_______ _______ _______14 BX 941 (14-4) 2014 SULLAIR 1350/500


_______ _______ _______14 BX 942 (14-5) 2014 SULLAIR 1350/500


11



_______ _______ _______14 BX 943 (14-6) 2014 GARDNER DENVER

WB-12 2-Stage Booster, S/N-S412159, w/7.5" x 5" Bore p/bBALDOR 600HP 1790RPM ElecMotor w/575-Volt Starter Box,COTTA Gear Reduction Drive,MURPHY Gauge Panel, MESABIHeat Exchangers, Elec Cable,Mtd on Covered Skid (1545Metered Hours)

_______ _______ _______14 BX 944 (14-7) 2014 12'W x 48'L Crimped

Steel VFD Control House w/5000Amp 600-Volt Main 65K A/CSwitchgear f/(3) 2-Megawatt GenConn f/600-Volt Utility Power, (8)600-Volt Branch Circuits, (5)CUTLER HAMMER 600HP SoftStarters f/Air Comps, (3)Variable Spd Frequency Drives,500 KVA & 112.5 KVATransformers, 600 Amp 480-Volt& 300 Amp 120/208-Volt BreakerPanels, ALLEN BRADLEY PLCTouch Screen Master Control,NORTHERN Air Climate ControlUnit, External ReceptacleStation, Skidded (Note: w/GridPower, Diesel or NG Gen PowerCapability)

12



_______ _______ _______12 GP 945 (12-7) Air Foam Unit w/SULLAIR

Air Compressor, S/N-0060300127, p/b DETROIT Series60 Diesel Eng, GARDNERDENVER Booster p/b DETROITSeries 60 Diesel Eng, KERRKP300 Triplex Pump p/b 4-CylDiesel Eng, Manual Trans, 2-Compartment Tank, Diesel FuelTank, All Mtd on 48' 3-Axle DropDeck Trailer, VIN-_____________, 255/70R22.5Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______12 GP 946 (12-10) AIR LIQUID 60 2F

Nitrogen Unit w/ALTRONICControl Panel

_______ _______ _______12 GP 947 (12-11) GENERON High Pressure

Membrane Nitrogen Unit, S/N-MM015008

_______ _______ _______18 CK 948 (x) 1987 IHC 1954 S/A Truck

w/Logging/Monitor Van Body,Vin-1HTLDTVN5HHA24160, 265"WB p/b IHC 6-Cyl Diesel Eng,FULLER 13-Spd Trans, (2) RoofMtd AC's, Elec Lights, 11R22.5's

13



TRUCKS & TRAILERS

_______ _______ _______1 AL 949 (x) 2007 IHC Paystar 5600 T/A

Rig-Up Bed Truck, VIN-_____________, 360" WB p/bCUMMINS ISX 500HP (Pre-Emission) Diesel Eng, FULLER 9-Spd Main w/4-Spd Aux Trans,22,000# Front & 58,000# Rears,Walking Beam Susp, 9'W Bedf/BRADEN 150 & TULSA 90Winches, 10"Dia RollingTailboard, 445/65R22.5 Front &12R-24.5 Rear Tires (103,000Miles)

_______ _______ _______1 AL 950 (x) 2007 MACK Granite T/A Rig-

Up Gin Truck, VIN-1M2AG11C57M064029, p/bMACK 450HP Diesel Eng, MACKMaxitorque 8-Spd Main & 4-SpdAux Trans, 22,000# Front &54,000# Rears, CAMELBACKSusp, 9'W Bed w/TULSA 100 &70 Winches, Live Pole Winch, 6"Triple Lined Poles, 10"DiaRolling Tailboard, 445/65R22.5Front & 12R-24.5 Rear Tires

14



_______ _______ _______2 AM 951 (x) 2012 PETERBILT T/A Rig-Up

Pole Truck, Vin-1NPTL4TX5CD162281, 397" WBp/b CUMMINS ISX15 450HPDiesel Eng, EATON FULLER 10-Spd Trans, Aux Trans, TULSARufnek 130,000# Winch,CHELSEAL PTO, Triple Frame,10" Rolling Tailboard, 445R22.5Front & 12.00R24 Rear Tires(64,297 Miles)

_______ _______ _______2 AL 952 (x) 1994 INTERNATIONAL

Paystar 5000 Tandem TandemPole Truck, VIN-2HSTGM2T4RC083419, 352" WBp/b CAT 3406 Diesel Eng,EATON 18-Spd Manual Trans,65,000# Rear, TULSA HydPowered 130,000# Winch, Poles,Headache Rack, Toolboxes,RT425/65R22.5 Front & 11R24.5Rear Tires (477,625 Miles)

_______ _______ _______1 AL 953 (x) 1992 MACK RD T/A Rig-Up

Gin Truck, VIN-1N2P267C1NM011693, 280" WBp/b MACK 350 Diesel Eng, 5-SpdMain w/NEW 4-Spd Aux Trans,20,000# Front, 46,000# Rears,CAMELBACK Susp, TULSA 100& 34 Winches, 6" Triple LinedPoles, 10"Dia Rolling Tailboard,425/65-22.5 Front & 11R-24.5Rears

15



_______ _______ _______2 AL 954 (x) 1993 MACK RD688S T/A Pole

Truck, VIN-2M2P267UPC016475,289" WB p/b MACK EMT-300Diesel Eng, Manual Trans, PTOw/Chain Drive, TULSA Rufnek100,000# Winch w/Poles,Headache Rack, RollingTailboard, 425/65R22.5 Front &11R24.5 Rear Tires

_______ _______ _______2 AL 955 (x) 1982 KENWORTH C-500 T/A

Pole Truck, VIN-1NKCL2OX1C195899, 296" WBp/b CUMMINS NTC-350 DieselEng, Manual Trans, PTO, TULSA Rufnek 100,000# Winch,BRADEN Winch w/Poles, 10"Rolling Tailboard, 445/65R22.5Front & 11R24.5 Rear Tires

_______ _______ _______2 AL 956 (x) 1981 AUTOCAR T/A Truck,

VIN-1WBRCCJE4B0093726, 350"WB p/b Diesel Eng, ManualTrans, PTO w/Chain Drive,TULSA Rufnek Winch, HeadacheRack, Toolboxes, RollingTailboard, 445/65R22.5 Front 712.00R24 Tires (1,063,011Metered Miles)

16



_______ _______ _______1 CE 957 (x) 1997 MACK CL-173 T/A

Oilfield Gin Truck, VIN-1M2AD09C8WW005776, 281" WBp/b MACK E7-350 Diesel Eng,Maxitorque T-2130 13-Spd MainTrans, 4-Spd Aux Trans, PTO's,40,000# Rears, Dbl Frame w/21'Rig-Up Bed w/TULSA 70L,TULSA 34 & TULSA Live PoleWinches, 29'L Reinforced GinPoles, 8-5/8" Rolling Tailboard,Cutting Torch Hose Reel,Toolboxes, 425/65R22.5 Front &11R-24.5 Rear Tires, All AlumBudds, 403,769 Miles, 30,688Hours

_______ _______ _______1 CE 958 Roustabout Tools: Unit

Wrenches, Combo & PipeWrenches, Fence Post Drivers,VICTOR Cutting Torch, ImpactWrenches, Asst'd Sockets, AirDrill, Chains & Binders, HammerWrenches, Polished RodClamps, Air/Hyd Foot ControlPump & Misc

_______ _______ _______15 AG 959 (x) (15-1) 1991 KENWORTH W-

900B 4-Axle Winch Truck, VIN-1XKWD60X7M5565374,w/Pusher Axle, 255" WB p/bCUMMINS 855/14 Diesel Eng,FULLER RTO-15715 15-Spd Main& AT-1202 2-Spd Aux Trans,46,000# Rears, TULSA 80 Winch,Frame Width Rolling Tailboard,5th Wheel, 285/75R-24.5 Front &11R-24.5 Rear Tires

17



_______ _______ _______2 BE 960 (x) 2008 INTERNATIONAL T/A

Sleeper Truck, VIN-2HCVAPRO9C092235, 224" WBp/b CUMMINS ISX 450HP DieselEng, EATON 10-Spd Trans, PTO,11R22.5 Tires w/5th Wheel(1,203,353 Metered Miles, 33,869Metered Hours)

_______ _______ _______2 BE 961 (x) 2005 FREIGHTLINER T/A

Sleeper Truck, Vin-1FUJA6CKX6L024533, 246" WBp/b DETROIT Series 60 300HPDiesel Eng, EATON 10-SpdTrans, PTO, 5th Wheel, 11R22.5Tires (864,051 Metered Miles,37,810.8 Metered Hours)

_______ _______ _______18 CK 963 (x) 1998 KENWORTH T-800 T/A

Winch/Vacuum Truck, VIN-1XKDD99X8WJ767970, 192" WBp/b CUMMINS M11-350ESPDiesel Eng, FULLERRTLO14610B Trans, PTO's, WetKit, Air Ride Susp, Rufnek 34Hyd Winch, WALLENSTEIN 3"Hyd Vac Pump, Frame WidthRolling Tailboard, 5th Wheel,11R22.5's

18



_______ _______ _______18 CK 964 (x) 1977 IHC Paystar 5000 (F-

5070) T/A Winch Truck, VIN-D3117GGB19209, 189" WB p/bDETROIT 8V-71N Diesel Eng,FULLER RT-951 13-Spd Trans,PTO, TULSA 34L Winch, FrameWidth Rolling Tailboard, 5thWheel, 11R-22.5's

_______ _______ _______18 CK 965 (x) 1981 KENWORTH W-900A

T/A Oilfield Rig-Up Bed Truck,VIN-1NKWL29X9BS193266, 284"WB p/b CUMMINS NTC-350 BCDiesel Eng, 1252A 5-Spd Main &1241C 4-Spd Aux Trans, 5.29Gears, SSHD 44,000# Rears,PTO's, 21' Bed w/TULSA 70LR &TULSA 34 Winches, 8-5/8"ODRolling Tailboard, 11R-24.5's

_______ _______ _______18 CK 966 (x) 1980 OSHKOSH R-1246-2 T/A

Gin Truck, VIN-18731, 203" WBp/b CAT 3406 Diesel Eng,FULLER RT-12509 9-Spd Main &2-Spd Aux Trans, 46,000# Rears,PTO, 16' Bed w/BRADEN MS-20Hyd Winch, Gin Poles, RollingTailboard, 5th Wheel,385/65R22.5 Front & 11R-24.5Rear Tires

_______ _______ _______18 CK 967 (x) 1978 IHC F-2275 6x4 T/A

Truck, VIN-DF227HHA17078,160" WB p/b CUMMINS DieselEng, FULLER 13-Spd Trans, 5thWheel, 10.00R-20 Tires

19



_______ _______ _______18 CK 968 (x) 1982 IHC 1854 S/A Gin Truck,

Vin-1HTAA1853CHA10055, 206"WB p/b IHC DT-466 Diesel Eng, 5-Spd w/2-Spd Rear Axle, 15' Bedw/RAMSEY & TULSA Winches,Gin Poles, Rolling Tailboard, 5thWheel, 10.00x20's

_______ _______ _______18 CK 969 (x) 1995 FREIGHTLINER T/A

Truck, VIN-1FUYDSEB0SH638209, 212" WBp/b DETROIT Series 60 DieselEng, FULLER Trans, PTO, AirRide Susp, 40,000# Rears, 5thWheel, 22.5 Tires

_______ _______ _______18 CK 970 (x) 1982 FORD 9000 T/A Truck,

VIN-1FDY090RXCVA36551, p/bDETROIT 6V-71 Diesel Eng,FULLER RTO-11608LL Trans,Headache Rack, 5th Wheel,22.5's

_______ _______ _______18 CK 971 (x) 2004 CHEVROLET 1-1/2-Ton

S/A Dually Flatbed Truck, VIN-1GBE4E1164F506633, 4-Doorp/b DURAMAX Diesel Eng, AutoTrans, 19.5 Tires

20



_______ _______ _______18 CK 972 OSHKOSH R2046 T/A Truck, VIN-

17923, p/b CUMMINS NTC-350Diesel Eng, FULLER RT-12515Main & 2-Spd Aux Trans,20,000# Front & 46,000# Rears,Dbl Framed, 395/85R22.5 Front &11R-22.5 Rear Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______18 CK 973 (x) 1989 KENWORTH W-900 T/A

Truck, VIN-2XKWDB9XOKM52614, p/bCUMMINS NTC-350 Diesel Eng,FULLER Trans, Air Ride Susp,22.5's

_______ _______ _______18 CK 974 (x) 1985 MACK R686ST T/A Cab

& Chassis, VIN-1M2N179Y2FA098158, 222" WBp/b MACK 6-Cyl Diesel Eng,MACK 6-Spd Trans, 22.5's

_______ _______ _______2 BN 975 (x) 2008 PETERBILT T/A Pole

Truck, VIN-1NPTLOEX890778149, 327" WBp/b CUMMINS ISM410 DieselEng, EATON FULLER ManualTrans, PTO w/Chain Drive,TULSA Rufnek 65,000# &45,000# Winches w/Poles,Headache Rack, 8" RollingTailboard, Triple Frame,445/65R22.5 Front & 11R24.5Rear Tires (Inoperable)

21



_______ _______ _______2 BN 976 (x) 2007 MACK CV-713 T/A Pole

Truck, VIN-1M2AG11C47M059429, 342" WBp/b MACK 6-Cyl Diesel Eng,Maxitorque Manual Trans, PTOw/Chain Drive, TULSA 65,000# &45,000# Winches w/Poles,Headache Rack, 10" RollingTailboard, Triple Frame,445/65R22.5 Front & 11R24.5Rear Tires (Inoperable)

_______ _______ _______2 BN 977 (x) 2007 MACK GU-713 T/A Rig-

Up Truck, VIN-1M2AX04658M002816, ___" WBp/b MACK MP7-405M Diesel Eng,Maxitorque Manual Trans, PTOw/Chain Drive, TULSA 65,000# &45,000# Winches, 10" RollingTailboard, Triple Frame,445/65R22.5 Front & 11R24.5Rear Tires (Inoperable)

_______ _______ _______2 BN 978 (x) 2005 WESTERN STAR T/A

Rig-Up Truck, VIN-5KKJALAYX6PW45993, 383" WBp/b CAT C-15 Diesel Eng,SPICER Manual Trans, PTOw/Chain Drive, TULSA 65,000# &45,000# Winches, HeadacheRack, 12" Rolling Tailboard,Triple Frame, 445/65R22.5 Front& 12.00R24 Rear Tires(Inoperable)

22



_______ _______ _______2 BN 979 (x) 2006 PETERBILT 379 T/A

Sleeper Truck, VIN-1XP50B9X770650404, 248" WBp/b CAT C15 Diesel Eng, ManualTrans, 5th Wheel, 11R22.5 Tires(Inoperable)

_______ _______ _______2 BB 980 (x) 2012 KENWORTH T800 T/A

Sleeper Truck, VIN-1XK0040X0DJ338853, 216" WBp/b CUMMINS ISX15 485HPDiesel Eng, Auto Trans, 5thWheel, 11R22.5 Tires (152858)(Inoperable)

_______ _______ _______2 BB 981 (x) 2012 KENWORTH T800 T/A

Sleeper Truck, VIN-1XKDD40X0DJ338898, 216" WBp/b CUMMINS ISX15 Diesel Eng,Auto Trans, 11R22.5 Tires (Partsof Eng Stripped, Inoperable)(152842)

_______ _______ _______2 BB 982 (x) 2011 PETERBILT 367 T/A

Sleeper Truck, VIN-1XPTD40X060149932, 244" WBp/b ISX15 500HP CUMMINSDiesel Eng, No Trans, 5th Wheel,11R22.5 Tires (Inoperable)(0149932)

23



_______ _______ _______2 BB 983 (x) 2001 PETERBILT 357 T/A

Sleeper Truck, VIN-2XPADU9X42DS73994, 233" WBp/b CAT C12 395HP Diesel Eng,Manual Trans, 5th Wheel,11R24.5 Tires (Inoperable)(0173994)

_______ _______ _______2 BB 984 (x) 2006 MACK CXN-61337271

T/A Sleeper Truck, VIN-1M2AK06Y87N016368, 205" WBp/b MACK E-7 Diesel Eng, 10-Spd Trans, 5th Wheel(Inoperable) (0116368)

_______ _______ _______2 BB 985 (x) 2008 MACK CXU-613 T/A

Sleeper Truck, VIN-1M1AW02Y89N006652, 220" WBp/b MACK E-7 Diesel Eng, 10-Spd Trans, 5th Wheel, 11R22.5Tires (Inoperable) (0106652)

_______ _______ _______2 BB 986 (x) 1999 MACK CH-613 T/A

Sleeper Truck, VIN-1M2AA18Y9YW126928, 215" WBp/b MACK E-7 Diesel Eng, 10-Spd Trans, 5th Wheel, 11R22.5Tires (Inoperable) (0126928)

_______ _______ _______2 BB 987 (x) 2005 MACK CXN-613 T/A

Sleeper Truck, VIN-1M1AK07Y4SN006906, p/bMACK E-7 Diesel Eng, 10-SpdTrans, 5th Wheel, GARDNERDENVER APOGAA Compressor(Inoperable) (0106906)

24



_______ _______ _______2 BB 988 (x) 1999 MACK CH-613 T/A

Sleeper Truck, VIN-1M1AA13Y9XW101117, p/bMACK E-7 Diesel Eng, 10-SpdTrans, 216" WB, 11R22.5 Tires(Inoperable) (101117)

_______ _______ _______2 BB 989 (x) 1998 MACK CH-613 T/A

Sleeper Truck, VIN-1M1AA14Y9X203898, 214" WBp/b MACK E-7 Diesel Eng, 10-Spd Trans, 5th Wheel, 11R22.5Tires (Inoperable) (0103898)

_______ _______ _______2 BB 990 (x) 1999 MACK CH-613 T/A

Sleeper Truck, VIN-1M1AA13Y5XW110929, p/bMACK E-7 Diesel Eng, 10-SpdTrans, 200" WB, 5th Wheel,11R22.5 Tires (Inoperable)(0110929)

_______ _______ _______2 BB 990

A(x) 2000 MACK CX-613 T/ASleeper Truck, VIN-1M1AE06Y71W009506, p/bMACK E-7 Diesel Eng, 10-SpdTrans, 210" WB, 5th Wheel,11R22.5 Tires (0109506)

_______ _______ _______2 BB 991 (x) 2006 FREIGHTLINER T/A

Sleeper Truck, VIN-1FUJA6CK97LW91595, 24" WBp/b DETROIT Series 60 14L515HP Diesel Eng, ManualTrans, 5th Wheel, 295/75R22.5Tires (Inoperable) (02X2595)

25



_______ _______ _______2 BB 992 (x) 2005 MACK CXN-613 T/A

Sleeper Truck, VIN-1M1AK06Y06M010101, 209" WBp/b MACK E-7 Diesel Eng, 10-Spd Trans, 5th Wheel, 11R22.5Tires (Inoperable) (0110101)

_______ _______ _______2 BN 993 (x) 1996 WESTERN STAR Triaxle

Winch Tractor, VIN-2WLPCCJG2TK944322, p/bCUMMINS Diesel Eng, 10-SpdTrans, 252" WB, TULSA Winch,13' Bed Poles, Rolling Tailboard,11R24.5 Tires (Inoperable)

_______ _______ _______1 AL 994 (x) 1981 NUTTALL 3-Axle Narrow

Neck Oilfield Lowboy, VIN-NMC50248, w/Inverted 5thWheel, Rolling Tailboard, NeckRoller

_______ _______ _______1 AL 995 (x) 1979 NABORS 3-Axle Narrow

Neck Oilfield Lowboy, VIN-25908LD3, w/Inverted 5th Wheel,Rolling Tailboard, Neck Roller

_______ _______ _______1 AL 996 (x) 1973 DOWNING 3-Axle

Narrow Neck Oilfield Lowboy,VIN-473301, w/Inverted 5thWheel, Rolling Tailboard, NeckRoller

26



_______ _______ _______18 CK 997 Shopbuilt 40'OAL T/A Oilfield

Lowboy, 8'W x 11'L Neck, 29'Deck, Rolling Tailboard, StrapWinches, Hand Crank LandingGear, 9.00x20 Tires(NOTE: BILL OF SALE ONLY)

_______ _______ _______18 CK 998 (x) 1980 AZTEC 40' T/A Oilfield

Float, VIN-FCB010040, 100,000#GVWR, 8-5/8" OD RollingTailboard, Folding LandingGear, 11R22.5's

_______ _______ _______18 CK 999 (x) 1954 AMERICAN 34' T/A

Oilfield Float, VIN-6586,w/CAMELBACK Susp, 8-5/8"ODRolling Tailboard, FoldingLanding Gear, 11R22.5's

_______ _______ _______18 CK 1000 (x) 1981 HOBBS 75K-45 45' T/A

Float, VIN-1H5P04527BN032802,w/Strap Winches, 11R22.5's

_______ _______ _______2 BN 1001 (x) 2005 TRANSCRAFT T/A 48'

Flatbed Trailer, VIN-1TTF4820562015363, 80,000#GVWR, Air Brakes, Kingpin,11R24.5 Tires

_______ _______ _______2 BN 1004 (x) 1989 LUFKIN T/A 38' Flatbed

Trailer, VIN-1L01B4221E1065754, 84,000#GVWR, Air Brakes, Tool Basket,Kingpin, 11R24.5 Tires

27



_______ _______ _______2 BN 1005 (x) 1983 LUFKIN T/A 38' Flatbed

Trailer, VIN-1L01B4221D1061380, 98,000#GVWR, Air Brakes, Kingpin,11R24.5 Tires

_______ _______ _______2 BN 1006 (x) 1988 FONTAINE T/A 48'

Flatbed Trailer, VIN-13N148203K1545309, 80,000#GVWR, Air Brakes, Kingpin,11R24.5 Tires

_______ _______ _______2 BN 1007 (x) 1996 LOADKING 45' T/A

Equipment Trailer w/10' UpperLoading Deck & 3' Dovetailw/Folding Ramps, VIN-1B4L40243T6120326, 82,450#GVWR, Air Brakes, Kingpin,245/70R17.5 Tires (Missing Axle)

_______ _______ _______2 BB 1008 8'W x 42'L Flatbed Trailer, VIN-

_________, 11R22.5 Tires(1322610)(NOTE: BILL OF SALE ONLY)

_______ _______ _______2 BB 1009 (x) 1987 FRUEHAUF T/A 3000-

Gal Fuel Tank, VIN-4T0442XJ617502, w/LiquidControls, Fuel Pump w/Hose,Leveling Jacks, Kingpin,11R22.5 Tires (1322849)

28



DRILLING COMPONENTS

_______ _______ _______1 AC 1010 2008 CANRIG TM-120 Iron

Roughneck, S/N-10, w/Spinner &Makeup/Breakout Assembly,Complete

_______ _______ _______1 CH 1011 FORUM PWS-2250 Pipe

Wrangler Hyd Catwalk, S/N-22MP101150640FM463, RigFloor Height 22' Max, 8000# LiftCapacity p/b 100HP Elec 480-Volt Motor (486 Metered Hours),Hyd Leveling Jacks & Controls

_______ _______ _______1 CH 1012 FORUM PWS-2250 Pipe

Wrangler Hyd Catwalk, S/N-22MP101150639FM462, RigFloor Height 22' Max, 8000#Capacity p/b 100HP Elec 480-Volt Motor (675 Metered Hours),Hyd Leveling Jacks, Stairs &Controls

_______ _______ _______1 CT 1013 GO GETTER 28"H x 7'2"W x

34'6"L Hyd Pipe Tub

_______ _______ _______1 CT 1014 GO GETTER 28"H x 7'2"W x

34'6"L Hyd Pipe Tub

_______ _______ _______1 CT 1015 GO GETTER 28"H x 7'2"W x

34'6"L Hyd Pipe Tub

29



_______ _______ _______1 CT 1016 GO GETTER 28"H x 7'2"W x

34'6"L Hyd Pipe Tub

_______ _______ _______1 CT 1017 GO GETTER 28"H x 7'2"W x

34'6"L Hyd Pipe Tub

_______ _______ _______1 CT 1018 GO GETTER 28"H x 7'2"W x

34'6"L Hyd Pipe Tub

_______ _______ _______2 AY 1019 TESCO 150-ECI 400HP Top Drive

w/TESCO SWL 150-Ton Split 4-Sheave Traveling Block, 2-1/4" x108"L Elevator Links, S/N-T84231

_______ _______ _______1 GB 1020 2014 NATIONAL OILWELL

VARCO TDS-3H Top Drive Trans,S/N-TDS3F27V184, w/ShippingStand

_______ _______ _______1 AC 1021 WEATHERFORD MP-8 800HP

Triplex Pump, S/N-CD200817,w/Quick Change Fluid End(NEW)

_______ _______ _______2 AC 1022 Pump Package, Lots 1023 thru

1024

_______ _______ _______2 AC 1023 RSF-1000 Triplex Mud Pump,

S/N-RS11001, Forged Steel FluidEnd w/Quick Change Caps, RSPulsation Dampener, FIVE STAR2500 Cent Pump, Skidded

30



_______ _______ _______2 AC 1024 CAT 3508 Diesel Eng, S/N-

LLE0579, w/Air Starter, ControlPanels, Radiator(NOTE: REMOVAL CHARGE$500.00)

_______ _______ _______2 AC 1025 Pump Package, Lots 1026 thru

1027

_______ _______ _______2 AC 1026 RSF-1000 Triplex Mud Pump,

S/N-RS06141, Forged Steel FluidEnd w/Quick Change Caps,Pulsation Dampener, MCM 5" x6" Cent Pump, Skidded

_______ _______ _______2 AC 1027 CAT 3508 Diesel Eng, S/N-

CBB00311, w/Air Starter, ControlPanels, Radiator(NOTE: REMOVAL CHARGE$500.00)

_______ _______ _______5 BS 1028 (5-85) NOV/ELMAGCO 7838W

Elec Brake, S/N-RVB11279W,600 Max RPM, 250 VDC MaxInput DC Volts, 150GPM Min,Coolant Flowrate, Water Cooled

_______ _______ _______5 BS 1029 (5-42) IDECO E-1700 Drum

Assembly Shaft, LEBUSGrooved f/1-1/4" Line, DualAssist Hydro Brake, ChainSprocket

31



_______ _______ _______5 BS 1030 (5-43) IDECO 1000 Drumshaft,

LEBUS Grooved f/1" Line, ChainSprocket

_______ _______ _______5 BS 1031 (5-1) NATIONAL 10-P-130 Triplex

Pump w/Forged Steel Fluid End,CONTINENTAL EMSCO 5000#Pulsation Dampener, Skidded(Note: REBUILT w/Papers)


Pump w/Forged Steel Fluid End,CONTINENTAL EMSCO 5000#Pulsation Dampener, Skidded(REBUILT w/Papers)

_______ _______ _______5 BS 1033 (5-3) MK-PZ9 1000HP Triplex

Pump w/Forged Steel Fluid End,Skidded (REBUILT)


Pump w/SOUTHWEST ForgedSteel Fluid End, Master Skidded

_______ _______ _______5 BS 1035 (5-5) GARDNER DENVER PZ7

Triplex Pump Gear End, Skidded

_______ _______ _______5 BS 1036 (5-6) WORTHINGTON 2-1/2" x 4"

Duplex Pump p/b 24HP ElecMotor, Skidded

_______ _______ _______5 BS 1037 (5-51) GARDNER DENVER PZ-9

Pinion Shaft (UNUSED)

32



_______ _______ _______5 BS 1038 (5-52) NATIONAL 12-P-160

Pinion Shaft (UNUSED)

_______ _______ _______5 BS 1039 (5-11) 350KW Gen Set p/b

DETROIT Series 60 Diesel Engw/Elec Starter, Radiator,SAYLOR BEALL 735 AirCompressor, 100-Gal Air VolumeTank, Fuel Tank, Workbench,Lockers, All Mtd in 8'W x 32'LGen/Tool Room House w/RoundTop, Skidded

_______ _______ _______5 AO 1040 (5-12) CAT Gen Set 1050KW p/b

CAT 399 Diesel Eng w/HMSV &Gauges, Skidded

_______ _______ _______5 BS 1041 (5-7) CAT D398 BPC Diesel Eng,

S/N-66B09888, w/Gauges, HMSV(Note: 0 Hour REBUILT)

_______ _______ _______5 BS 1042 (5-8) DETROIT 12V-71 T/T Diesel

Eng w/ALLISON 8961 Trans,Horizontal Radiator, Drive Shaft,Skidded

_______ _______ _______5 AO 1043 (5-9) CAT D399 Diesel Eng, S/N-

35B5866, w/Gauges, HMSV

_______ _______ _______5 AO 1044 (5-10) CAT D379 Diesel Eng, S/N-

68B1051, w/Gauges

_______ _______ _______5 AO 1045 (5-13) NATIONAL C-245-100

Torque Converter

33



_______ _______ _______5 AO 1046 (5-14) NATIONAL C-245-100

Torque Converter

_______ _______ _______5 BS 1047 (5-81) CAT 398 Horizontal

Exhaust System

_______ _______ _______1 CH 1048 CAT LC6 410KW Gen, S/N-

G6B14916, p/b CAT C15 ACERTDiesel Eng w/Elec Starter,Radiator, CAT EMCP 3.1 ControlPanel, All Skidded

_______ _______ _______1 AK 1049 CAT D-379 Diesel Eng, S/N-

68B6579, w/Radiator, Controls,Pump Drive, Skidded

_______ _______ _______1 AK 1050 CAT D-379 Diesel Eng, S/N-

68B6583, w/Radiator, Controls,Air Starter, Skidded

_______ _______ _______1 AP 1051 CAT 3408 Diesel Eng, S/N-

__________, ALLISON CLT-5860Trans, Radiator, Controls, ElecStarter, Skidded

_______ _______ _______2 BH 1052 CAT 800KW Gen Set, S/N-83822,

p/b CAT 398 Diesel Eng, S/N-66B08826 (00695 Metered Hours)w/QUINCY 3900 RB AirCompressor, Skidded

34



_______ _______ _______2 BH 1053 CAT 800KW Gen Set, S/N-

8579316, p/b CAT 398 DieselEng, S/N-066B07599 (15,152Metered Hours) w/QUINCY 5126Air Compressor, Skidded

_______ _______ _______2 BH 1054 CAT 800KW Gen Set, S/N-79641,

p/b CAT 398 Diesel Eng, S/N-66B6877 (02107 Metered Hours)w/QUINCY QSI245 AirCompressor, Skidded

_______ _______ _______12 GP 1055 (12-5) 10'W x 38'L Gen House

w/VOLVO PENTA 402KW GenSet p/b VOLVO TAD12412E 6-CylEng w/Elec Starter, Radiator,Gauges, SQUARE D ElecStation, Parts Shelves, Skidded

_______ _______ _______12 GP 1056 (12-9) KOHHLER 190KW Gen p/b

JOHN DEERE 8.1L Power TechDiesel Eng, Mtd on Skid w/PartsHouse & Diesel Tank

_______ _______ _______12 GP 1057 (12-29) DETROIT Series 60

Diesel Eng w/ALLISON 5860Trans

_______ _______ _______12 GP 1058 (12-30) DETROIT Series 60

Diesel Eng

35



PARTIAL RIG

_______ _______ _______16 CB 1059 (16-1) BDW800 MI 1000HP S/D

Drawworks, LEBUS f/1-1/4" Line,Catheads, 2-Eng In-LineCompound w/Pump Drive, V-Belts p/b (2) CAT 3508 760HPDiesel Engs, Ea w/Air Starter,Radiator, Gauges, (2) QUINCY325 Air Compressors, Skidded(16-2) PARMAC 342 Dbl HydroBrake w/Cradle, PartialOverrunning Clutch, BrakeWater Tank(16-3) DSI 136'H x 20'6"W550,000# SHL Cantilever Mast, 7-Sheave Crown Block, RackingBoard, 4" Standpipe, 3"ID RotaryHose, 1-1/4" Drill Line, Spool &Stand, 16'H x 25'W x 51'L Box-On-Box Substructure w/Stairs,Safety Rails, Deadline Anchor,(2) Built-In Parts Rooms(16-4) EMSCO 350-Ton Blockw/WEB WILSON 350-Ton HydraHook (Located in Mast, NewOwner to Remove)(16-5) OILWELL PC300 Swivel(Hanging on Mast Stand)

_______ _______ _______16 CB 1060 (16-6) OILWELL A850-PT Triplex

Pump, 350HP w/Forged SteelFluid End & Quick Change Caps, HYDRIL Pulsation Dampener, 5"x 6" Charge Pump p/b CAT 3508DA Diesel Eng w/Air Starter,Radiator, Gauges, Chain DriveAssembly, Master Skidded

36



_______ _______ _______17 AG 1061 LEE C. MOORE 131'H x 18'6"W

550,000# SHL Mast w/(5) 36" &(1) 56" Fastline Sheave, CrownBlock f/1-1/4" Line, Rig Lights,4" Standpipe, Racking Board,shoes

37



DRILL PIPE & COLLARS

_______ _______ _______1 CT 1062 (4278) Ft (138 Jts) GRANT

PRIDECO 4-1/2", TSS-95, 16.60#,Rng 2 Drill Pipe w/4-1/2"XH, BNTool Jts

_______ _______ _______1 CT 1063 (4247) Ft (137 Jts) GRANT

PRIDECO 4-1/2", TSS-95, 16.60#,Rng 2 Drill Pipe w/4-1/2"XH, BNTool Jts

_______ _______ _______1 CT 1064 Jt 4-1/2" Conv HWDP w/4-

1/2"XH, BN Tool Jts, HB

_______ _______ _______1 CT 1065 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1066 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1067 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1068 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1069 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1070 Jt 4-1/2" Conv HWDP w/4-


38



_______ _______ _______1 CT 1071 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1072 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1073 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1074 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1075 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1076 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1077 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1078 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1079 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1080 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1081 Jt 4-1/2" Conv HWDP w/4-


39



_______ _______ _______1 CT 1082 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1083 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1084 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1085 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1086 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1087 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1088 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1089 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1090 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1091 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______1 CT 1092 Jt 4-1/2" Conv HWDP w/4-


40



_______ _______ _______1 CT 1093 Jt 4-1/2" Conv HWDP w/4-


_______ _______ _______2 BY 1094 (1674) Ft (54 Jts) 4-1/2", S-135,

16.60#, Rng 2 Drill Pipe w/4"IFConn, HB

_______ _______ _______2 BY 1095 (1674) Ft (54 Jts) 4-1/2", S-135,


_______ _______ _______2 BY 1096 (1674) Ft (54 Jts) 4-1/2", S-135,


_______ _______ _______2 BY 1097 (1674) Ft (54 Jts) 4-1/2", S-135,


_______ _______ _______2 BY 1098 (1674) Ft (54 Jts) 4-1/2", S-135,


_______ _______ _______2 BY 1099 (1674) Ft (54 Jts) 4-1/2", S-135,


_______ _______ _______2 BY 1100 (1674) Ft (54 Jts) 4-1/2", G-105,

16.60#, Rng 2 Drill Pipe w/4-1/2"XH Conn, HB

41



_______ _______ _______2 BY 1101 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1102 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1103 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1104 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1105 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1106 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1107 (1674) Ft (54 Jts) 4-1/2", G-105,


_______ _______ _______2 BY 1108 (1674) Ft (54 Jts) 4-1/2", G-105,


42



_______ _______ _______2 BY 1109 Jt of 4-1/2" Conv HWDP w/4-

1/2"XH Conn, HB w/5-15/16"OD x21" Avg TJ's















43



















44



















45



















46



















47



















48

















_______ _______ _______1 AC 1164 9-3/4"OD x 3"ID x 28.43'L Spiral

Drill Collar w/7-5/8"Reg Conn,SR

49







_______ _______ _______1 AC 1167 9-3/8"OD x 3-1/8"ID x 27.80'L

Spiral Drill Collar w/7-5/8"RegConn, SR

_______ _______ _______1 AC 1168 9-3/8"OD x 3-1/8"ID x 27.71'L


_______ _______ _______1 AC 1169 9-1/4"OD x 3-1/8"ID x 27.96'L


_______ _______ _______1 AC 1170 9-1/4"OD x 3-1/8"ID x 27.88'L


_______ _______ _______1 AD 1171 8"OD x 2-7/8"ID x 31.00'L Spiral

Drill Collar w/NC-56 Conn, SR,HB (Like NEW MPI'D)



50



















51



_______ _______ _______1 AM 1181 7-1/4"OD x 2-1/3"ID x 31.04'L

Spiral Drill Collar w/4-1/2"IFConn (NEW)

_______ _______ _______1 AM 1182 7-1/4"OD x 2-13/16"ID x 31.07'L


_______ _______ _______1 AM 1183 7-1/4"OD x 2-13/16"ID x 30.99'L


_______ _______ _______1 AM 1184 7-1/4"OD x 2-13/16"ID x 30.98'L


_______ _______ _______1 AM 1185 7-1/4"OD x 2-13/16"ID x 31.00'L


_______ _______ _______1 AM 1186 7-1/4"OD x 2-13/16"ID x 30.64'L


_______ _______ _______1 AM 1187 7-1/4"OD x 2-13/16"ID x 31.05'L


_______ _______ _______1 AM 1188 7-1/4"OD x 2-13/16"ID x 31.04'L


52



_______ _______ _______1 AM 1189 7-1/4"OD x 2-13/16"ID x 31.04'L


_______ _______ _______1 AM 1190 7-1/4"OD x 2-13/16"ID x 31.06'L


_______ _______ _______1 AM 1191 7-1/4"OD x 2-13/16"ID x 31.02'L


_______ _______ _______1 AM 1192 7-1/4"OD x 2-13/16"ID x 31.05'L


_______ _______ _______1 AM 1193 7-1/4"OD x 2-13/16"ID x 31.09'L


_______ _______ _______1 AM 1194 7-1/4"OD x 2-13/16"ID x 30.63'L


_______ _______ _______1 AM 1195 7-1/4"OD x 2-13/16"ID x 30.83'L


_______ _______ _______1 AM 1196 7-1/4"OD x 2-13/16"ID x 30.75'L


53



_______ _______ _______1 AM 1197 7-1/4"OD x 2-13/16"ID x 31.05'L


_______ _______ _______1 AM 1198 7-1/4"OD x 2-13/16"ID x 30.11'L

Spiral Drill Collar w/4-1/2"IFConn, HB

_______ _______ _______1 AM 1199 7-1/4"OD x 2-13/16"ID x 30.38'L


_______ _______ _______1 AM 1200 7-1/4"OD x 2-13/16"ID x 30.47'L


_______ _______ _______1 AM 1201 7-1/4"OD x 2-13/16"ID x 30.56'L


_______ _______ _______1 AM 1202 7-1/4"OD x 2-13/16"ID x 30.26'L


_______ _______ _______1 AM 1203 7-1/4"OD x 2-13/16"ID x 30.68'L


_______ _______ _______1 AM 1204 7-1/4"OD x 2-13/16"ID x 29.91'L


54



_______ _______ _______1 AM 1205 7-1/4"OD x 2-13/16"ID x 30.74'L


_______ _______ _______1 AM 1206 7-1/4"OD x 2-13/16"ID x 30.15'L


_______ _______ _______1 AM 1207 7-1/4"OD x 2-13/16"ID x 30.42'L


_______ _______ _______1 AM 1208 7-1/4"OD x 2-13/16"ID x 30.60'L


_______ _______ _______1 AM 1209 7-1/4"OD x 2-13/16"ID x 30.20'L


_______ _______ _______1 AM 1210 7-1/4"OD x 2-13/16"ID x 30.16'L


_______ _______ _______1 AM 1211 7-1/4"OD x 2-13/16"ID x 30.08'L


_______ _______ _______1 AM 1212 7-1/4"OD x 2-13/16"ID x 30.56'L


55



_______ _______ _______1 AM 1213 7-1/4"OD x 2-13/16"ID x 30.56'L


_______ _______ _______1 AM 1214 7-1/4"OD x 2-13/16"ID x 30.52'L


_______ _______ _______1 AM 1215 7-1/4"OD x 2-13/16"ID x 31.30'L


_______ _______ _______1 AM 1216 7-1/4"OD x 2-13/16"ID x 30.22'L


_______ _______ _______1 AM 1217 7-1/4"OD x 2-13/16"ID x 30.21'L


_______ _______ _______1 AM 1218 7-1/4"OD x 2-13/16"ID x 30.56'L


_______ _______ _______1 AM 1219 7-1/4"OD x 2-13/16"ID x 30.56'L


_______ _______ _______1 AM 1220 7-1/4"OD x 2-13/16"ID x 30.17'L


56



_______ _______ _______1 AM 1221 7-1/4"OD x 2-13/16"ID x 30.53'L


_______ _______ _______1 AM 1222 7-1/4"OD x 2-13/16"ID x 30.10'L


_______ _______ _______1 AM 1223 7-1/4"OD x 2-13/16"ID x 30.64'L


_______ _______ _______1 AM 1224 7-1/4"OD x 2-13/16"ID x 30.29'L


_______ _______ _______1 AM 1225 7-1/4"OD x 2-13/16"ID x 30.48'L


_______ _______ _______1 AM 1226 7-1/4"OD x 2-13/16"ID x 30.35'L


_______ _______ _______1 AM 1227 7-1/4"OD x 2-13/16"ID x 30.58'L


_______ _______ _______1 AM 1228 7-1/4"OD x 2-13/16"ID x 30.19'L


57



_______ _______ _______1 AM 1229 7-1/4"OD x 2-13/16"ID x 29.26'L


_______ _______ _______1 AM 1230 7-1/4"OD x 2-13/16"ID x 30.20'L


_______ _______ _______1 AM 1231 7-1/4"OD x 2-13/16"ID x 30.28'L


_______ _______ _______1 AM 1232 7-1/4"OD x 2-13/16"ID x 30.10'L


_______ _______ _______1 AM 1233 7-1/4"OD x 2-13/16"ID x 30.32'L


_______ _______ _______1 AM 1234 7-1/4"OD x 2-13/16"ID x 30.19'L


_______ _______ _______1 AM 1235 7-1/4"OD x 2-13/16"ID x 30.54'L


_______ _______ _______1 AM 1236 7-1/4"OD x 2-13/16"ID x 30.44'L


58



_______ _______ _______1 AM 1237 7-1/4"OD x 2-13/16"ID x 30.06'L


_______ _______ _______1 AD 1238 7-1/8"OD x 2-7/8"ID x 30.58'L


_______ _______ _______1 AD 1239 7-1/8"OD x 2-7/8"ID x 29.92'L


_______ _______ _______1 AD 1240 7-1/8"OD x 2-7/8"ID x 30.09'L


_______ _______ _______1 AD 1241 7-1/4"OD x 2-7/8"ID x 30.69'L


_______ _______ _______1 AD 1242 7-1/8"OD x 2-7/8"ID x 30.51'L


_______ _______ _______1 AD 1243 7-1/8"OD x 2-7/8"ID x 29.69'L


_______ _______ _______1 AD 1244 7-1/4"OD x 2-7/8"ID x 30.27'L


59



_______ _______ _______1 AD 1245 7-1/8"OD x 2-7/8"ID x 30.25'L


_______ _______ _______1 AD 1246 7-1/4"OD x 2-7/8"ID x 30.32'L


_______ _______ _______1 AD 1247 7-1/4"OD x 2-7/8"ID x 30.12'L


_______ _______ _______1 AD 1248 7-1/4"OD x 2-7/8"ID x 30.64'L


_______ _______ _______1 AD 1249 7-1/8"OD x 2-7/8"ID x 30.34'L


_______ _______ _______1 AD 1250 7-1/8"OD x 2-7/8"ID x 29.88'L


_______ _______ _______1 AD 1251 7-1/4"OD x 2-7/8"ID x 30.33'L


_______ _______ _______1 AD 1252 7-1/8"OD x 2-7/8"ID x 29.66'L


60



_______ _______ _______1 AD 1253 7-1/4"OD x 2-7/8"ID x 30.44'L


_______ _______ _______1 AC 1254 6-9/16"OD x 2-1/4"ID x 30.97'L

Slick Drill Collar w/4-1/2"XHConn, SR, HB (NEW)

_______ _______ _______1 AC 1255 6-9/16"OD x 2-1/4"ID x 31.01'L


_______ _______ _______1 AC 1256 6-9/16"OD x 2-1/4"ID x 30.98'L


_______ _______ _______1 AC 1257 6-9/16"OD x 2-1/4"ID x 31.02'L


_______ _______ _______1 AC 1258 6-9/16"OD x 2-1/4"ID x 31.05'L


_______ _______ _______1 AC 1259 6-9/16"OD x 2-1/4"ID x 31.02'L


_______ _______ _______1 AC 1260 6-9/16"OD x 2-1/4"ID x 31.04'L


61



_______ _______ _______1 AC 1261 6-9/16"OD x 2-1/4"ID x 31.02'L


_______ _______ _______1 AC 1262 6-9/16"OD x 2-1/4"ID x 31.04'L


_______ _______ _______1 AC 1263 6-9/16"OD x 2-1/4"ID x 31.02'L


_______ _______ _______1 AC 1264 6-9/16"OD x 2-1/4"ID x 31.04'L


_______ _______ _______1 AC 1265 6-9/16"OD x 2-1/4"ID x 31.05'L


_______ _______ _______1 AD 1266 6-1/2"OD x 2-1/4"ID x 30.80'L

Slick Drill Collar w/4-1/2"XHConn (Like NEW)

_______ _______ _______1 AD 1267 6-1/2"OD x 2-1/4"ID x 30.78'L


_______ _______ _______1 AD 1268 6-1/2"OD x 2-1/4"ID x 30.80'L


62



_______ _______ _______1 AD 1269 6-1/2"OD x 2-1/4"ID x 31.36'L


_______ _______ _______1 AD 1270 6-1/2"OD x 2-1/4"ID x 30.81'L


_______ _______ _______1 AD 1271 6-1/2"OD x 2-1/4"ID x 30.79'L


_______ _______ _______1 AD 1272 6-1/2"OD x 2-1/4"ID x 30.80'L


_______ _______ _______1 AD 1273 6-1/2"OD x 2-1/4"ID x 30.81'L


_______ _______ _______1 AD 1274 6-1/2"OD x 2-1/4"ID x 30.78'L


_______ _______ _______1 AD 1275 6-1/2"OD x 2-1/4"ID x 30.79'L


_______ _______ _______1 CT 1276 6-1/4"OD x 2-3/8"ID x 30.49'L

Slick Drill Collar w/4-1/2"XHConn

63



_______ _______ _______1 CT 1277 6-5/16"OD x 2-7/16"ID x 29.56'L


_______ _______ _______1 CT 1278 6-9/16"OD x 2-5/16"ID x 29.39'L

Slick Drill Collar w/4-1/2"XHConn, SR

_______ _______ _______1 CT 1279 6-3/8"OD x 2-1/2"ID x 29.36'L


_______ _______ _______1 CT 1280 6-3/8"OD x 2-5/16"ID x 29.98'L


_______ _______ _______1 CT 1281 6-5/16"OD x 2-7/16"ID x 29.57'L


_______ _______ _______1 CT 1282 6-9/16"OD x 2-5/16"ID 29.58'L


_______ _______ _______1 CT 1283 6-1/4"OD x 2-1/2"ID x 29.34'L


_______ _______ _______1 CT 1284 6-5/16"OD x 2-1/2"ID x 28.82'L


64



_______ _______ _______1 CT 1285 6-1/2"OD x 2-5/16"ID x 30.11'L


_______ _______ _______1 CT 1286 6-9/16"OD x 2-5/16"ID x 30.09'L


_______ _______ _______1 CT 1287 6-3/8"OD x 2-1/2"ID x 29.27'L


_______ _______ _______1 CT 1288 6-5/16"OD x 2-3/8"ID x 29.66'L


_______ _______ _______1 CT 1289 6-1/2"OD x 2-5/16"ID x 29.85'L


_______ _______ _______1 CT 1290 6-1/2"OD x 2-5/16"ID x 30.50'L


_______ _______ _______1 CT 1291 6-1/4"OD x 2-1/2"ID x 28.42'L


_______ _______ _______1 CT 1292 6-1/2"OD x 2-5/16"ID x 31.02'L


65



_______ _______ _______1 CT 1293 6-1/2"OD x 2-5/16"ID x 31.04'L


_______ _______ _______1 CT 1294 6-5/16"OD x 2-7/16"ID x 30.42'L


_______ _______ _______1 CT 1295 6-9/16"OD x 2-3/8"ID x 30.60'L

Slick Drill Collar w/4-1/2"XHConn, SR, HB

_______ _______ _______1 CT 1296 6-1/2"OD x 2-5/16"ID x 31.03'L


_______ _______ _______1 CT 1297 6-5/8"OD x 2-3/8"ID x 30.84'L


_______ _______ _______1 CT 1298 6-5/8"OD x 2-5/16"ID x 31.12'L


_______ _______ _______1 CT 1299 6-3/8"OD x 2-3/8"ID x 30.86'L


_______ _______ _______1 CT 1300 6"OD x 2-3/8"ID x 28.56'L Slick

Drill Collar w/4-1/2"XH Conn

66



_______ _______ _______1 AD 1301 6-1/2"OD x 2-7/8"ID x 31.12'L

Slick Drill Collar w/4-1/2"XHConn, SR, HB (NOV Inspected)

_______ _______ _______1 AD 1302 6-1/2"OD x 2-7/8"ID x 30.79'L


_______ _______ _______1 AD 1303 6-3/8"OD x 3"ID x 29.83'L Slick

Drill Collar w/4-1/2"XH Conn,SR, HB (NOV Inspected)

_______ _______ _______1 AD 1304 6-3/8"OD x 2-7/8"ID x 31.18'L


_______ _______ _______1 AD 1305 6-1/2"OD x 2-7/8"ID x 30.50'L


_______ _______ _______1 AD 1306 6-1/2"OD x 2-7/8"ID x 31.11'L


_______ _______ _______1 AD 1307 6-1/2"OD x 2-5/16"ID x 31.13'L


_______ _______ _______1 AD 1308 6-1/2"OD x 2-5/16"ID x 30.41'L


67



_______ _______ _______1 AD 1309 6-3/8"OD x 3"ID x 30.77'L Slick


_______ _______ _______1 AD 1310 6-1/2"OD x 3"ID x 30.08'L Slick


_______ _______ _______1 AD 1311 6-3/8"OD x 2-7/8"ID x 31.19'L


_______ _______ _______1 AD 1312 6-7/16"OD x 2-7/8"ID x 30.85'L


_______ _______ _______1 AD 1313 6-1/2"OD x 2-7/8"ID x 31.17'L


_______ _______ _______1 AD 1314 6-1/2"OD x 2-7/8"ID x 31.13'L


_______ _______ _______1 AD 1315 6-1/2"OD x 2-5/16"ID x 30.86'L


_______ _______ _______15 AG 1316 (15-18) 6-1/16"OD x 2-1/4"ID x

29.03'L Slick Drill Collar w/4-1/2"XH Conn

68



_______ _______ _______15 AG 1317 (15-19) 6"OD x 2-3/8"ID x 29.58'L


_______ _______ _______15 AG 1318 (15-20) 6-3/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1319 (15-21) 6-3/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1320 (15-22) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______15 AG 1321 (15-23) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______15 AG 1322 (15-24) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1323 (15-25) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1324 (15-26) 6"OD x 2-1/4"ID x 30.24'L


69



_______ _______ _______15 AG 1325 (15-27) 6"OD x 2-1/4"ID x 29.44'L


_______ _______ _______15 AG 1326 (15-28) 6-2/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1327 (15-29) 6-3/16"OD x 2-3/4"ID x


_______ _______ _______15 AG 1328 (15-30) 6-2/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1329 (15-31) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1330 (15-32) 6-3/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1331 (15-33) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1332 (15-34) 6-3/16"OD x 2-1/2"ID x


70



_______ _______ _______15 AG 1332

A(15-35) 6-5/16"OD x 2-3/8"ID x29.57'L Slick Drill Collar w/4-1/2"XH Conn

_______ _______ _______15 AG 1333 (15-36) 6-1/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1334 (15-37) 6-2/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1335 (15-38) 6-3/16"OD x 2-1/4"ID x


_______ _______ _______15 AG 1336 (15-39) 6-1/4"OD x 2-1/4"ID x


_______ _______ _______15 AG 1337 (15-40) 6-3/16"OD x 2-3/4"ID x

29.16'L Spiral Drill Collar w/4-1/2"XH Conn

_______ _______ _______15 AG 1339 (15-41) 6"OD x 2-1/4"ID x 30.01'L


_______ _______ _______15 AG 1340 (15-42) 6"OD x 2-1/8"ID x 29.00'L


71



_______ _______ _______15 AG 1341 (15-43) 6"OD x 2-3/8"ID x 29.90'L


_______ _______ _______15 AG 1342 (15-44) 6"OD x 2-3/8"ID x 29.22'L


_______ _______ _______2 GP 1343 Set of 3'H x 30'L Pipe Racks







_______ _______ _______2 GP 1350 Set of 3'H Pipe Racks, (1) 28'L &

(1) 24'L

_______ _______ _______1 AP 1351 (3) 42"H x 26'L & (1) 42"H x 24'L

Triangular Pipe Racks

72



WELL CONTROL EQUIPMENT

_______ _______ _______5 BS 1352 (5-72) SHAFFER LWS 9" 3000#

Dbl Blowout Preventerw/Studded Top & Bottom, All onShipping Stand

_______ _______ _______5 BS 1353 (5-73) HYDRIL V 11" 5000# Sgl

Blowout Preventer w/StuddedTop & Bottom w/3-1/2" PipeRams

_______ _______ _______5 BS 1354 (5-31) Type U 16-3/4" x 5" Pipe

Rams

_______ _______ _______5 BS 1355 (5-32) Type U 16-3/4" x 5" Pipe

Rams

_______ _______ _______5 BS 1356 (5-33) Type U 16-3/4" x 5" Pipe

Rams

_______ _______ _______5 BS 1357 (5-34) Type U 16-3/4" x 3-1/2"

Pipe Rams

_______ _______ _______5 BS 1358 (5-35) SHAFFER 13-5/8" x 4-1/2"

10,000# LWS Rams

_______ _______ _______5 BS 1359 (5-36) SHAFFER 13-5/8" x 2-3/8"

10,000# LWS Rams

_______ _______ _______5 BS 1360 (5-37) SHAFFER 11" 5000# Blind

LWS Rams

73



_______ _______ _______5 BS 1361 (5-38) SHAFFER 11" 5000# Blind

LWS Rams

_______ _______ _______5 BS 1362 (5-39) SHAFFER 13-5/8" x 5"

5000# LWS Rams

_______ _______ _______5 BS 1363 (5-40) 11" x 3-1/2" 5000# LWS

Rams

_______ _______ _______5 BS 1364 (5-41) 11" 5000# Blind LWS

Rams

_______ _______ _______5 BS 1365 (5-53) 2004 5000# Choke

Manifold w/DOYLE'S ManualChoke Valves, (2) 4-1/16" 5000#,(6) 2-1/16" 5000# & (1) 1-1/16"5000#, Mtd on Skid

_______ _______ _______5 BS 1366 (5-54) (2) CAMERON 2-1/16"

10,000# Gate Valves, TOTAL 3-1/16" 10,000# Gate Valve,CAMERON 2-1/16" 10,000#Check Valve, T-3 ENERGY 2-9/16" 10,000# Air Op, SWACOChoke Valve, 4-1/16" 5000# x 3-1/16" 5000# DSA, 4-1/16" 5000#Weld-On Companion Flange,SWACO Super Choke Valve,Control Panel w/Air Hoses

_______ _______ _______1 AD 1367 HYDRIL GK-8-900 9" 3000#

Annular Blowout Preventerw/Studded Top & FlangedBottom

74



_______ _______ _______1 AB 1368 SHAFFER 9" 3000# Annular

Blowout Preventer w/StuddedTop & Flanged Bottom

_______ _______ _______1 AC 1369 HYDRIL GK 13-5/8" 3000#

Annular Blowout Preventerw/Studded Top & FlangedBottom

_______ _______ _______1 CT 1370 SHAFFER 9" 3000# Annular

Blowout Preventer w/StuddedTop & Flanged Bottom, (2)SHAFFER LWS 9" 3000# SglBlowout Preventer, BothStudded Top & Bottom & 9"3000# Drilling Spool

_______ _______ _______1 AC 1371 SHSAFFER 9" 3000# Sgl

Blowout Preventer w/BlindRams & Studded Top & Bottom

_______ _______ _______1 AC 1372 SHAFFER 9" 3000# Sgl Blowout

Preventer w/4" Pipe Rams &Studded Top & Bottom

_______ _______ _______1 CT 1373 SHAFCO 11" 3000# Sgl Blowout

Preventer w/Studded Top &Bottom

_______ _______ _______1 AE 1374 Set of SHAFFER 13-5/8" x 5"

5000# Blowout Preventer Rams

_______ _______ _______1 AC 1375 SHAFFER 13-5/8" 5000# Element

(UNUSED)

75



_______ _______ _______1 AB 1376 RAGAN 13" Type K Element

(UNUSED)

_______ _______ _______1 AE 1377 (2) Drilling Spools, (1) 20"H x 7-

1/16" 10,000# & (1) 15"H x 4-1/16" 15,000# x 7-1/16" 10,000#

_______ _______ _______1 AC 1378 (4) Drilling Spools, (1) 17"H x 9"

5000# & (2) 20"H x 13-5/8" 5000#& (1) 24"H x 11" 5000#

_______ _______ _______1 AD 1379 (4) Drilling Spools, (1) 32"H x

11" 5000#, (2) 23"H x 11" 5000#& (1) 26" x 11" 5000#


11" 5000# & (1) 16"H x 7" 3000#


11" 5000# & (2) 24"H x 11" 5000#

_______ _______ _______1 AD 1382 (4) Various Size Drilling Spools

_______ _______ _______1 AD 1383 (4) Various Size Drilling Spools

_______ _______ _______1 AD 1384 (5) Drilling Spools, (1) 96"H x 13-

5/8" 5000#, (1) 120"H x 11"5000#, (1) 72"H x 11" 5000#, (2)72"H x 7" 3000#

_______ _______ _______1 AD 1385 (3) Various Size DSAs

76



_______ _______ _______1 CS 1386 (3) Various Size DSAs



_______ _______ _______1 AD 1389 13-5/8" 10,000# x 11" 10,000#

DSA

_______ _______ _______1 AC 1390 13-5/8" 10,000# x 11" 10,000#

DSA

_______ _______ _______1 AD 1391 KOOMEY Type 80 4-Station

Closing Unit w/Triplex Pump p/b20HP Elec Motor, (4) 20-GalAccumulator Bottles, SwitchBox, Gauges & Controls,Skidded

_______ _______ _______1 AC 1392 KOOMEY 4-Station Closing Unit

w/CAT 45G1 Triplex Pump p/bHATZ Supra Diesel Eng w/ElecStarter, (4) 10-Gal AccumulatorBottles, Gauges & Controls,NOV Air Pump, Hyd Hoses,Skidded

_______ _______ _______1 AC 1393 (10) 1" 5000# Colflex Hoses, (2)

30'L & (8) 40'L, All in SteelShipping Box

_______ _______ _______1 CV 1394 (2) 10'L BOP Steel Armored Kill

Line Hoses w/1502 Conn

77



_______ _______ _______1 AC 1395 SWACO Super Choke Panel

_______ _______ _______2 GP 1396 TOWNSEND 11" 3000# Annular

Blowout Preventer

_______ _______ _______2 GP 1397 TOWNSEND 11" 3000# Sgl

Blowout Preventer w/BlindRams

_______ _______ _______2 GP 1398 TOWNSEND 11" 3000# Sgl

Blowout Preventer w/4-1/2" PipeRams

_______ _______ _______2 AY 1399 DRILLING CONTROLS Type 80 5-

Station Closing Unit w/(6) 10-GalBottles, (2) Triplex Pumps p/b15HP Elec Motors, Skidded

_______ _______ _______2 AN 1400 KOOMEY 5-Station Closing Unit,

S/N-118304, w/(4) 10-Gal Bottles,Triplex Pump p/b HONDA Eng,Air Pump, Skidded

_______ _______ _______12 GP 1401 (12-34) 2012 CAD CONTROL

SYSTEMS High/Low PressureTest System w/Hydroplex TriplexPump p/b 30HP Elec Motor, AirPump, Pressure Gauges, ChartRecorders, Skidded

78



CASING & DRILL PIPEHANDLING TOOLS

_______ _______ _______1 AB 1402 ECKEL 13-3/8" Hyd Casing

Tongs w/ATLAS Tong TorqueGauge & Steel Shipping Stand

_______ _______ _______1 AO 1403 FARR 10-3/4" LW Hyd Casing

Tongs w/Hanger

_______ _______ _______1 AD 1404 ECKEL 10-3/4" Hyd Casing

Tongs

_______ _______ _______1 AB 1405 Set of ECKEL 10-3/4" x 8-5/8"

Tong Heads

_______ _______ _______1 AS 1406 Hyd Power Unit w/PARKER Hyd

Pump p/b 40HP Elec Motor, HydCooler Fan p/b BALDOR 1.5HPElec Motor, Hyd Tank, HydHoses, Starter Box, All Mtd onShipping Stand

_______ _______ _______1 AS 1407 IEC SYSTEMS Hyd Power Unit

w/Hyd Pump p/b 25HP ElecMotor, Remote Operator'sConsole, Hyd Tank, Hyd Hoses,Starter Box, All Mtd on ShippingStand

79



_______ _______ _______1 AO 1408 VIERECK Hyd Power Unit w/Hyd

Pump p/b 30HP Elec Motor, HydCooler Fan p/b 1.5HP ElecMotor, Hyd Hoses, Starter box,Hyd Tank, All Mtd on ShippingStand

_______ _______ _______1 AO 1409 Hyd Power Unit w/Hyd Pump p/b

FORD 4-Cyl Diesel Eng,Radiator, Hyd & Fuel Tanks, HydHoses, Controls, All Mtd onShipping Stand

_______ _______ _______1 AD 1410 (2) 3" x 192" Elevator Bails

_______ _______ _______1 AD 1411 (2) 3" x 192" Elevator Bails

_______ _______ _______1 AP 1412 (2) 3-1/2" x 144" Elevator Bails

_______ _______ _______1 AO 1413 (2) BJ 175-Ton Elevator/Spiders

w/5-1/2" Slips

_______ _______ _______1 AO 1414 (2) BJ 500-Ton Elevator/Spiders

_______ _______ _______1 AO 1415 BVC 150-Ton Slip Type Elevator,

Dressed f/5-1/2" Pipe

_______ _______ _______1 AO 1416 BVC 150-Ton Slip Type Elevator,

Dressed f/4-1/2" Pipe

_______ _______ _______1 AO 1417 BJ 150-Ton Slip Type SD

Elevator, Dressed f/5-1/2" Pipe

80



_______ _______ _______1 AE 1418 BAASH ROSS 36" 200-Ton

Hinged Bowl

_______ _______ _______1 AE 1419 BAASH ROSS 30" 200-Ton

Hinged Bowl

_______ _______ _______1 AE 1420 BAASH ROSS 30" 200-Ton

Hinged Bowl

_______ _______ _______1 AC 1421 JOY 30" 200-Ton Hinged Bowl

w/30" x 24" Split Insert (NEW)

_______ _______ _______1 AC 1422 HCS 20" 500-Ton Hinged Bowl

(NEW)

_______ _______ _______1 AE 1423 BV 8-5/8" 750-Ton CL Elevator

_______ _______ _______1 AB 1424 YC Slip Type Elevator, Dressed

f/5-1/2" Pipe

_______ _______ _______1 AB 1425 YC Slip Type Elevator, Dressed

f/7" Pipe

_______ _______ _______1 AB 1426 (2) BJ 100-Ton 8-5/8" CL

Elevators & (1) WEB WILSON100-Ton 8-5/8" CL Elevator

_______ _______ _______1 AE 1427 RT 250-Ton 5-1/2" CL Elevator

_______ _______ _______1 AE 1428 (2) AOT 250-Ton 5-1/2" CL

Elevators

81



_______ _______ _______1 AB 1429 WEB WILSON 250-Ton 5-1/2" CL

Elevator

_______ _______ _______1 AC 1430 SLX 250-Ton 24-1/2" SD Casing

Elevator (UNUSED)

_______ _______ _______1 AB 1431 (3) WILSON 100-Ton Casing

Elevators, (1) 13-3/8", (1) 8-5/8"& (1) 7"

_______ _______ _______1 CA 1432 BJ 100-Ton 5-1/2" Casing

Elevator

_______ _______ _______9 BF 1433 (9-37) WEB WILSON 150-Ton SD

Elevator, SLXI 150-Ton SDElevator, (2) SLXI 150-Ton SDElevators, (2) WILSON 50-TonSD Elevators

_______ _______ _______9 BF 1434 (9-36) KO 150-Ton CL Elevator,

(2) WILSON 50-Ton SDElevators, (3) SLX 150-Ton SDElevators

_______ _______ _______2 AN 1435 (2) BJ 5-1/2" Casing Elevators,

(1) SLA 100-Ton CL & (1) SD

_______ _______ _______1 AB 1436 (3) Sets of (2) Slip Assemblies

f/Type E Casing Bowl, 8-5/8" &(2) 7-5/8"

_______ _______ _______1 AB 1437 Double Completion Spider &

Various Casing Spider Parts

82



_______ _______ _______1 AC 1438 UC-3 24" 19-Seg Casing Slip

(NEW)

_______ _______ _______1 AR 1439 UC-3 13-3/8" 12-Seg Casing Slip

(NEW)


(NEW)


(NEW)

_______ _______ _______1 AR 1442 (2) DCS-S 4" x 4-7/8" 7-Seg Drill

Collar Slips (NEW)

_______ _______ _______1 CA 1443 (2) DCS-S 10-Seg Drill Collar

Slips

_______ _______ _______1 CA 1444 (2) DCS-S 11-Seg & 8-Seg Drill

Collar Slips

_______ _______ _______1 AE 1445 (2) DCS-S 10-Seg & 8-Seg Drill

Collar Slips

_______ _______ _______1 AR 1446 (2) DCS-R 5-1/2" x 7" 9-Seg Drill

Collar Slips (NEW)

_______ _______ _______1 AR 1447 (2) DCS-R 5-1/2" x 7" 9-Seg Drill

Collar Slips (NEW)

_______ _______ _______1 AE 1448 (2) DCS-R 10-Seg Drill Collar

Slips

83



_______ _______ _______1 CA 1449 (4) DCS-R 5-1/2" x 7" 9-Seg Drill

Collar Slips

_______ _______ _______1 AP 1450 (1) DCS-R 9-Seg & (1) DCS-S 12-

Seg Drill Collar Slips

_______ _______ _______1 AR 1451 (2) DCS-L 6-3/4" x 8-1/4" 11-Seg

Drill Collar Slips (NEW)

_______ _______ _______1 AR 1452 (2) DCS-L 6-3/4" x 8-1/4" 11-Seg


_______ _______ _______1 AR 1453 (2) DCS-L 6-3/4" x 8-1/4" 11-Seg


_______ _______ _______1 AP 1454 (2) DCS-L 6-3/4" x 8-1/4" 11-Seg

Drill Collar Slips

_______ _______ _______1 CA 1455 (2) DCS-L 12-Seg Drill Collar

Slips

_______ _______ _______1 CA 1456 (2) DCS-L 12-Seg Drill Collar

Slips

_______ _______ _______1 AO 1457 (2) CMS-XL 9-Seg Casing Slips

_______ _______ _______1 AE 1458 (3) 4-1/2" DUL Drill Pipe Slips

_______ _______ _______1 AV 1459 (3) 4-1/2" DUL Drill Pipe Slips

84





_______ _______ _______1 AR 1462 (2) PMG 4-1/2" SDML Drill Pipe

Slips (NEW)

_______ _______ _______1 QB 1463 (2) 4-1/2" SDML & (1) 4-1/2" DUL

Drill Pipe Slips

_______ _______ _______1 CA 1464 (2) 4-1/2" SDML & (2) 5" SDXL

Drill Pipe Slips

_______ _______ _______1 AR 1465 (2) PMG 4-1/2" SDXL Drill Pipe

Slips (NEW)

_______ _______ _______1 AR 1466 (2) PMG 4-1/2" SDXL Drill Pipe

Slips (NEW)

_______ _______ _______1 AP 1467 (2) 4-1/2" SDXL & (1) 4-1/2"

SDML Drill Pipe Slips

_______ _______ _______1 AR 1468 (2) PMG 3-1/2" SDS Drill Pipe

Slips (NEW)

_______ _______ _______1 AD 1469 VARCO 3-1/2" SDS Drill Pipe

Slips

_______ _______ _______1 AB 1470 (2) MGG 4-1/2" 250-Ton BN CL

Elevators

85



_______ _______ _______1 AB 1471 (2) MGG 4-1/2" 250-Ton BN CL

Elevators

_______ _______ _______1 AB 1472 (2) MGG 4-1/2" 250-Ton BN CL

Elevators

_______ _______ _______1 AB 1473 (1) BJ 4" "& (1) NOV 4-1/2" 250-

Ton BN CL Elevators

_______ _______ _______1 AB 1474 (2) AOT 5" 250-Ton BN CL

Elevators

_______ _______ _______1 AB 1475 (1) WTM 5" 150-Ton & (1) BJ 5"

250-Ton BN CL Elevators

_______ _______ _______1 AB 1476 (1) BJ 5" & (1) AOT 5" 250-Ton

BN CL Elevators

_______ _______ _______1 AB 1477 (2) AOT 5" 250-Ton BN CL

Elevators

_______ _______ _______1 AB 1478 (2) WTM 4-1/2" 250-Ton BN CL

Elevators

_______ _______ _______1 AB 1479 (1) WTM & (1) AOT 4-1/2" 250-

Ton BN CL Elevators

_______ _______ _______1 AP 1480 (2) AOT & (1) WEB WILSON 4-

1/2" 250-Ton BN CL Elevators

_______ _______ _______1 AC 1481 (1) WTM & (1) AOT 4-1/2" 250-

Ton BN CL Elevators

86



_______ _______ _______1 AC 1482 (3) AOT 5-1/2" 250-Ton BN CL

Elevators

_______ _______ _______1 CA 1483 (1) WTM 4-1/2" 250-Ton BN CL

Elevators

_______ _______ _______1 AR 1484 (2) Type C 12-Seg Safety Clamps

w/Metal Shipping Box (NEW)





_______ _______ _______1 AN 1487 (2) Type C 12-Seg Safety Clamps


_______ _______ _______1 AV 1488 (3) Type C Safety Clamps, (1) 10-

Seg & (1) 9-Seg

_______ _______ _______1 AE 1488

A(4) Type C & T Safety Clamps

_______ _______ _______1 AC 1489 (4) WEB WILSON AAX Tong

Levers (NEW)

_______ _______ _______1 AC 1490 (2) BJ Type B Rotary Tongs

w/Heads

87



_______ _______ _______1 CT 1490

A(4) WOOLLEY TOOL AAX ShortTong Levers, (32) WOOLLEYTOOL AAX Rotary Tong Heads,All in Shipping Basket

_______ _______ _______1 AP 1491 KELCO Power Slips

_______ _______ _______1 AC 1492 GRAY 3570 Air Pipe Spinner, S/N-

911, w/Hanger

_______ _______ _______1 CS 1493 Air Pipe Spinner

_______ _______ _______1 AP 1494 Hyd Pipe Spinner w/Hanger

_______ _______ _______2 GP 1495 SPINMASTER 550H Hyd Pipe

Spinner w/Spring Hanger


Spinner


Spinner (Less Hyd Motor)

_______ _______ _______2 GP 1498 (2) BVM Type B Manual Tongs



_______ _______ _______2 GP 1501 (2) BVM Type B Manual Tongs,

(1) w/o Lifting Arm

88



_______ _______ _______2 GP 1502 (2) BVM Type B Manual Tongs,

(1) w/o Lifting Arm

_______ _______ _______2 GP 1503 (2) RT Type B Manual Tongs

w/Lifting Arms

_______ _______ _______2 GP 1504 (2) ROSTEL Type B Manual

Tongs

_______ _______ _______2 GP 1505 (2) RT Type B & (1) WOOLLEY

TOOLS Type B Manual Tongsw/Liftings Arms

_______ _______ _______2 GP 1506 (1) BVM Type B & (2) RT Type B

Manual Tongs w/Liftings Arms

_______ _______ _______1 CT 1507 (3) TORCANA Inside BOPs w/4-

1/2"XH Conn, (3) TORCANAStabbing Valves w/4-1/2"XHConn, (1) TORCANA Lower KellyValve w/4-1/2"FH Conn

_______ _______ _______1 CT 1507

A(3) TORCANA 4-1/2"XH StabbingValves, (3) TORCANA 4-1/2"FHLower Kelly Valves, (1)TORCANA 4"FH Lower KellyValve, (2) TORCANA 4-1/2"XHInside BOPs

_______ _______ _______1 AC 1508 (6) 4-1/2"XH Conn Lift Subs w/4-

12/"OD Shank, (1) 6-5/8"RegConn Lift Subs w/4-1/2"ODShank

89



_______ _______ _______1 AC 1509 (6) 4-1/2"XH Conn Lift Subs w/4-

1/2"OD Shank

_______ _______ _______1 AC 1510 (2) Lower Kelly Valves, (1) 4-

1/2"XH Conn & (1) 4"FH Conn

_______ _______ _______1 AC 1511 (2) 5-1/2"FH & 4-1/2"XH Box x

Box Bit Subs, (1) 4-1/2"XH Box xPin Sub, (2) 6-5/8"Reg Conn LiftSubs w/4-1/2"OD Shank

_______ _______ _______1 AC 1512 (1) Inside BOP w/4-1/2"IF Conn,

(1) Upper Kelly Valve w/6-5/8"Reg LH Conn, (1) 6-5/8"RegConn Bit Sub, (2) Various SizeSubs

_______ _______ _______1 CE 1513 (7) 4-1/2"IF Conn x 6-5/8"Reg

Conn x 8" Shank Pin x Pin Subs(UNUSED)

_______ _______ _______1 AC 1514 (5) Sets 6-5/8"Reg Conn, Lift

Nubbins

_______ _______ _______1 AC 1515 (7) Sets 4-1/2"IF Conn, Lift

Nubbins

_______ _______ _______1 AD 1516 (10) Asst'd Drill Collar

Changeover Subs

_______ _______ _______1 QB 1517 (4) Lift Subs, 3-1/2" SDML Slips

& (2) Sgl Jt Elevators, 4-1/2" & 5-1/2"

90



_______ _______ _______1 QB 1518 (11) Asst'd Lower Kelly Valves &

Changeover Subs

_______ _______ _______1 QB 1519 (10) Asst'd Drill Collar

Changeover Subs

_______ _______ _______9 BF 1520 (9-41) (4) Asst'd Crossover Subs




91



AUXILIARY EQUIP YARD 5

_______ _______ _______5 BS 1524 (5-61) HAWK JAW JR

Spinmaster K950 Jr Hyd PipeSpinner, S/N-117, w/Backup, AllMtd in Shipping Stand

_______ _______ _______5 BS 1525 (5-25) KING OIL TOOL 150-Ton

Hyd Top Drive Head

_______ _______ _______5 BS 1526 (5-23) NOV P-200 200-Ton Swivel

_______ _______ _______5 BS 1527 (5-24) SKYTOP BREWSTER 4SX

Swivel w/6-5/8" LH Crossover(UNUSED)

_______ _______ _______5 BS 1528 (5-15) NATIONAL P-500 Swivel

w/Shipping Stand

_______ _______ _______5 BS 1529 (5-16) CONTINENTAL EMSCO LB-

500 500-Ton Swivel

_______ _______ _______5 BS 1530 (5-17) CONTINENTAL EMSCO LB-

300 Swivel (REBUILT)

_______ _______ _______5 BS 1531 (5-18) IDECO Tru-Line 300-Ton

Swivel

_______ _______ _______5 BS 1532 (5-19) IDECO Tru-Line 300-Ton

Swivel

92



_______ _______ _______5 BS 1533 (5-20) TSM 150-Ton Swivel

_______ _______ _______5 BS 1534 (5-21) TSM 150-Ton Swivel

_______ _______ _______5 BS 1535 (5-82) (1) NATIONAL P-400

Swivel Stem w/5-1/2"FH Conn &(1) IDECO TL 120-Ton SwivelStem w/4-1/2" EUE Conn

_______ _______ _______5 BS 1536 (5-26) IDECO TB525 Block/Hook

Combo w/(6) 60" Sheaves, 1-3/8"Line

_______ _______ _______5 BS 1537 (5-27) CONTINENTAL EMSCO

650-Ton Block w/(6) 60"Sheaves, 1-1/2" Line & Bicket

_______ _______ _______5 BS 1538 (5-29) 2011 IDECO 110

Block/Hook Combo w/(4) 24"Sheaves, 1" Line (UNUSED)

_______ _______ _______5 BS 1539 (5-30) BJ 5350 Hydraplex 350-

Ton Hook (REBUILT)

_______ _______ _______5 BS 1540 (5-44) 8"OD Hyd Jar w/6-5/8"IF

Conn

_______ _______ _______5 BS 1541 (5-45) 6-1/2"OD Bumper Sub w/4-

1/2"FH Conn

_______ _______ _______5 AO 1542 (5-71) (60 WEATHERFORD 3-Pt

Roller Reamers w/4-12/" Box xPin Conn (Needs Repair)

93



_______ _______ _______5 BS 1543 (5-46) AMERICAN BLOCK

150,000# Deadline Anchor, SglLine 1-3/8" Line (UNUSED)

_______ _______ _______5 BS 1544 (5-47) HERCULES 150,000#

Deadline Anchor, Sgl Line 1-3/8"Line

_______ _______ _______5 AO 1545 (5-48) 150,000# Deadline Anchor,

Sgl Line 1-3/8" Line

_______ _______ _______5 BS 1546 (5-49) (4) 30" x 1" Crown

Sheaves (NEW)

_______ _______ _______5 BS 1547 (5-50) (4) 30" x 1" Crown

Sheaves (NEW)

_______ _______ _______5 BS 1548 (5-55) Mast Raising Yoke w/1-

1/4" Line Sheave


1/4" Line Sheave


1/4" Line Sheave

_______ _______ _______5 AO 1551 (5-58) INGERSOLL RAND LS150

Air Hoist

_______ _______ _______5 AO 1552 (5-59) K-LUND SWL150 Air Hoist

94



_______ _______ _______5 BS 1553 (5-60) 2006 KEM-TRON KTDG-

1200 Degasser w/Starter Box,S/N-64010, (3) 8" Outlets(UNUSED)

_______ _______ _______5 BS 1554 (5-83) Chemical/Caustic Mixing

Tank w/Elec Motor, ExplosiveProof Starter Box & Gravity FedHopper

_______ _______ _______5 BS 1555 (5-84) Chemical/Caustic Mixing

Tank w/Elec Motor, ExplosiveProof Starter Box & Gravity FedHopper

_______ _______ _______5 AO 1556 (5-62) VETCO Hyd Hose Storage

Spool p/b JOY Hyd w/Hyd Hose(Cord Type)

_______ _______ _______5 AO 1557 (5-65) (2) Boxes UNUSESD

Asst'd Hose Clamps, ButterflyValves, Gauges, Fittings &Nozzles

_______ _______ _______5 AO 1558 (5-66) Blower p/b 10HP Elec

Motor f/GE 752 Motor (UNUSED)

_______ _______ _______5 AO 1559 (5-67) SUMLAR 20-Gal 5000#

Pulsation Dampener

_______ _______ _______5 AO 1560 (5-68) HYDRIL 5000# Pulsation

Dampener

95



_______ _______ _______5 AO 1561 (5-69) CONTINENTAL EMSCO

5000# Pulsation Dampener

_______ _______ _______5 AO 1562 (5-70) Box INGERSOLL RAND &

CAT Elec & Air Starters

_______ _______ _______5 BS 1563 (5-76) Drill Line Spooler p/b

15HP Elec Motor, Manual Trans,Chain Drive w/Control Panel

_______ _______ _______5 AO 1564 (5-78) (4) SHUR-LIFT 2516.1

TESCO Hyd Cyls (UNUSED),MARTIN DECKER 180,000# WtIndicator w/Pad, T3 Energy HighPressure Chart Recorder,CAMERON IRON Relief Valve

_______ _______ _______5 AO 1565 (5-79) (2) DOUBLE E 4" Wireline

BOP (UNUSED), 5-1/8" 5000#Tree Block (UNUSED), FLO-MATIC PSA 4005 10/A Valve(UNUSED)

_______ _______ _______5 AO 1566 (5-80) (4) EATON 02-315283 Hyd

Pumps (UNUSED), (3) DETROITTurbo Chargers, BEAM ChargingPump, Hyd Pump

_______ _______ _______5 BS 1568 (5-74) 10'10" x 10'10" x 32"H

Steel Shipping Basket w/(2)10k000# COFLEX Choke Hoses(Tested)

96



_______ _______ _______5 BS 1569 (5-75) 10'10" x 10'10" x 32"H

Steel Shipping Basket w/GATES3" x 30' 10,000# WP Hose & (2) 2-1/16" 10,000# WP Choke Hosesw/2-1/16" 10,000# WP, Flange byFlange

97




_______ _______ _______1 AP 1570 SKYTOP BREWSTER 27-1/2"

Rotary Table w/Split MasterBushing

_______ _______ _______1 AS 1571 MUD KING RT-275 27-1/2"

Rotary Table w/Split MasterBushing

_______ _______ _______1 AP 1572 17-1/2" Master Bushing

_______ _______ _______1 AP 1573 VARCO 5-1/4" HD Hex Kelly

Drive Bushing

_______ _______ _______1 CT 1574 NATIONAL P-300 300-Ton Swivel

_______ _______ _______1 CT 1574

ANATIONAL P-200 200-Ton Swivel

_______ _______ _______1 CT 1575 RSH 5-1/4" Sq Kelly Drive

Bushing

_______ _______ _______1 CT 1576 FOSTER 77 Hyd Kelly Spinner

w/Hanger


w/Hanger


w/Hanger

98



_______ _______ _______1 CT 1579 4-1/4" x 40' Sq Kelly w/6-5/8"Reg

Conn

_______ _______ _______1 CT 1580 4-1/4" x 40' Sq Kelly w/6-5/8"Reg

Conn

_______ _______ _______1 CT 1581 4-1/4" X 40' Hex Kelly w/6-

5/8"Reg Box 3-1/2"IF Pin

_______ _______ _______1 CT 1582 4-1/4" X 40' Hex Kelly w/6-


_______ _______ _______1 CT 1583 4-1/4" X 40' Hex Kelly w/6-


_______ _______ _______1 CT 1584 4-1/4" X 40' Hex Kelly w/6-


_______ _______ _______1 CW 1585 (2) 2010 SWACO Mongoose PT

Linear Motion Shale Shakers,Unitized w/Rig Mat

_______ _______ _______1 AP 1586 SWACO Mongoose Linear Shale

Shaker & (2) FM DXP 150-4Shale Shaker Motors

_______ _______ _______1 GB 1587 FIVE STAR Retriever .092"

15,000' Hyd/Elec WirelineMeasuring Unit w/Approx 15,000'of NEW .092" Wire, Starter Box& Controls

99



_______ _______ _______1 AD 1588 OWI 1600 Explorer Hyd/Elec

Wireline Measuring Unit w/.092"Wire, Starter Box & Controls

_______ _______ _______1 AY 1589 UNIVERSAL U35EM Hyd/Elec

Wireline Measuring Unitw/Counter, Starter Box &Controls

_______ _______ _______1 AB 1590 Hyd/Elec Wireline Measuring

Unit w/Starter Box & Control

_______ _______ _______1 AC 1591 MISSION Magnum 6" x 5" x 14"

Cent Pump p/b 75HP Elec Motor,Skidded

_______ _______ _______1 AC 1592 MISSION Magnum 6" x 5" x 14"


_______ _______ _______1 AP 1593 MISSION Magnum 6" x 5" x 14"


_______ _______ _______1 AS 1594 MCM 2" x 3" x 13" Cent Pump

p/b 25HP Elec Motor, skidded

_______ _______ _______1 AS 1595 FIVE STAR 2" x 3" x 13" Cent

Pump p/b 25HP Elec Motor,Skidded

100





_______ _______ _______1 AP 1597 MISSION 1-7/8" Pedestal 3" x 4"



Cent Pump p/b 75HP Elec Motor,Shipping Stand

_______ _______ _______1 AD 1599 Mud Agitator, Complete w/15HP

Elec Motor & Paddle

_______ _______ _______1 AP 1600 (1) 48" & (1) 30" Bug Blowers

w/Starter Boxes & Stand

_______ _______ _______1 AP 1601 VARCO Hyd Power Unit

w/ADALET Switchbox, All Mtdon Covered Skid

_______ _______ _______1 AS 1602 SULLIVAN PALATEK 30DG

Rotary Screw Air Compressorp/b 30HP Elec Motor, Air Tank

_______ _______ _______1 AC 1603 QUINCY QSI-245 Rotary Screw

Air compressor p/b BALDOR60HP Elec Motor w/Air CooledSystem p/b BALDOR 1HP ElecMotor, Hyd Tank, QUINCYControl Panel, Skidded

101



_______ _______ _______1 AP 1604 QUINCY 270 Air Compressor

_______ _______ _______1 AP 1605 QUINCY 270 Air Compressor

w/BALDOR 10HP Elec Motor

_______ _______ _______1 AP 1606 (2) INGERSOLL RAND K4U

4000# Air Hoists

_______ _______ _______1 AP 1607 INGERSOLL RAND 5000# Air

Hoist

_______ _______ _______1 AP 1608 INGERSOLL RAND 5000# Air

Hoist

_______ _______ _______1 AP 1609 (3) GARDNER DENVER HK-12

Air Hoists

_______ _______ _______1 AP 1610 JOY 4000# Air Hoist,

PULLMASTER Air Hoist, AirHoist

_______ _______ _______1 QA 1611 Approx (50) Asst'd Drawworks

Break Bands & Brake Blocks

_______ _______ _______1 AP 1612 NATIONAL Type D Deadline

Anchor, S/N-T5982

_______ _______ _______1 AP 1613 (2) 4" Vibrator Hoses, In

Transport Basket

102



_______ _______ _______1 AP 1614 (7) SALA Man Blocks, (5) SALA

Safety Harnesses, Various SizeOpen End Wrenches, Misc RigTools, (2) 4"W x 4"L ForkliftForks

_______ _______ _______1 AP 1615 ACME Rig Transformer, Mtd on

Stand

_______ _______ _______1 AB 1616 (3) WESTERN MACHINE Air

Operated Diaphragm ChemicalPumps

_______ _______ _______1 CS 1617 3-1/2" Dbl Diaphragm Pump, Mtd

on Shipping Stand

_______ _______ _______1 AO 1618 (6) INGERSOLL RAND Air

Starters

103




_______ _______ _______15 AG 1619 (15-2) (2) NOV 10-P-130 Fluid

End Modules (REBUILT, NoPapers)

_______ _______ _______15 AG 1620 (15-3) (2) NOV 8-P-80 Fluid End

Modules (REBUILT, No Papers)

_______ _______ _______15 AG 1621 (15-8) REGAN K 10" 3000#

Annular Blowout Preventer

_______ _______ _______15 AG 1622 (15-7) CONTINENTAL T-1750 17-

1/2" x 44" Rotary Table w/SplitMaster Bushing

_______ _______ _______15 AG 1623 (15-13) BREWSTER 7SX Swivel



_______ _______ _______15 AG 1626 (15-12) CONTINENTAL EMSCO

LB-300 Swivel

_______ _______ _______15 AG 1627 (15-15) FIVE STAR Retriever

Hyd/Elec Wireline Unitw/Sheaves & Counter

_______ _______ _______15 AG 1628 (15-16) WILSON AAX Tongs

w/Heads

104



_______ _______ _______15 AG 1629 (15-14) WILSON AAX Tongs

w/Heads

_______ _______ _______15 AG 1630 (15-5, 15-6) (2) BJ MGG 150-Ton

Elevators, 4-1/2"BN

_______ _______ _______15 AG 1631 (15-9) (1) Air & (3) Elec Starters

_______ _______ _______15 AG 1632 (15-4) Low to High Pressure

Hammer Unions, Weld On Conn,Assortment of Butterfly Valves(UNUSED)

105




_______ _______ _______18 CK 1633 CAT 100KW Military Gen p/b

CAT 3306 Diesel Eng, Enclosedon 4-Wheel Trailer(NOTE: BILL OF SALE ONLY)

_______ _______ _______18 CK 1634 1976 FRUEHAUF 40' T/A Box

Van/Storage Trailer, VIN-MAR418309, w/10.00x20 Tires &Contents, Approx (100) 4" x 20'LSuction Tank Hoses (UNUSED)(NOTE: BILL OF SALE ONLY)

_______ _______ _______18 CK 1639 10'D x 17'L 10,000-Gal Fuel Tank

w/Manifold, Skidded

_______ _______ _______18 CK 1640 8'Dia x 21'L 7900-Gal Fuel Tank

& 5'4"Dia x 6'L 4-CompartmentLubester, Skidded

_______ _______ _______18 CK 1641 4'Dia x 32'L 30000-Gal Propane

Tank, Skidded

_______ _______ _______18 CK 1642 5'Dia x 22'L 3000-Gal Propane

Tank, Skidded

106




_______ _______ _______9 BF 1643 (9-31) 266-Bbl Water Tanks,

10'9"Dia x 16'L w/(2) CentPumps p/b Elec Motor


10'9"Dia x 16'L w/(2) CentPumps





_______ _______ _______9 BF 1647 (9-30) Approx 11'W x 11'H x 30'L

Doghouse w/8'L Porch, Skidded

_______ _______ _______9 BF 1648 (9-35) (5) PENNSYLVANIA SLING

CO Rathole Machine Cables

107




_______ _______ _______12 GP 1649 (12-15) MCM 5" x 6" Cent Pump

p/b 60HP Elec Motor w/Manifold,Skidded

_______ _______ _______12 GP 1650 (12-2) REGENT CSH-125 Boiler,

S/N-4281, w/5,230,000 Max BTUInput, Mtd in 10'W x 33'L Housew/Breaker Box, 10'W x 4'L ToolBasket

_______ _______ _______12 GP 1651 (12-3) 2005 CRG Boiler System,

S/N-SE5291502M, 150HP, Max150PSI WP w/5175 Steam Lb/Hr,POWERFLAME C5-0 Burner,Water Tank, 2-Pump System,Mtd in 12'W x 37'L House,Skidded

_______ _______ _______12 GP 1652 (12-4) 1998 HURST Boiler

System, S/N-550015038, 150 MaxPSI, 3450 Steam Lb/Hr, POWERFLAME C4-0A Burner, (2)Pumps, Mtd in 20'L StorageContainer

_______ _______ _______12 GP 1653 (12-17) 7'9"W x 24'L Top

Doghouse w/5'L Covered Porch,Knowledge Box, Bench &Cabinet Storage, Elec Heat &Lights, Skidded

108



_______ _______ _______12 GP 1654 (12-18) 8'W x 15'L

Doghouse/Parts Room w/4-Compartment Lubester, Skidded

_______ _______ _______12 GP 1655 (12-20) 8'W x 33'L Change/Parts

House w/Lockers & Shelves

_______ _______ _______12 GP 1656 (12-21) Skid w/Hardline Racks,

8'W x 6'7"H x 6'L Parts House

_______ _______ _______12 GP 1657 (12-22) 10'6"Dia x 32'L Water

Tank w/7'L Porch, 92) 2" x 3"Cent Pumps, Ea p/b 25HP ElecMotor

_______ _______ _______12 GP 1658 (12-23) 10'6"Dia x 32'L 500-Bbl

Water Tank

_______ _______ _______12 GP 1659 (12-19) 12'W x 9'6"H x Approx

48'L Diesel/Water Tank w/PartsRoom, 3-Compartment Lubester,Skidded

_______ _______ _______12 GP 1660 (12-16) 7'10"W x 5'H x 30'L 2-

Compartment Shaker Tankw/J55 Hyd Shale Shaker,Agitator w/(6) Jets, Plumbing,Hopper, Side-Mtd Walkways,Skidded

_______ _______ _______12 GP 1661 (12-33) 10'Dia x 21'H Silo

109



_______ _______ _______12 GP 1662 (12-24) TRITON 8'6"H x 20'L

Shipping Container

_______ _______ _______12 GP 1663 (12-25) TRITON 8'6"H x 20'L

Shipping Container

_______ _______ _______12 GP 1664 (12-26) TRITON 8'6"H x 20'L

Shipping Container

_______ _______ _______12 GP 1665 (12-27) TRITON 8'6"H x 20'L

Shipping Container

_______ _______ _______12 GP 1666 (12-28) T/A Trailer Dolly

(NOTE: BILL OF SALE ONLY)

110




_______ _______ _______2 BK 1667 Set of 2-1/2" x 131" Elevator

Links

_______ _______ _______2 GP 1668 QUINCY 390 Air Compressor

_______ _______ _______2 GP 1669 QUINCY 390 Air Compressor

_______ _______ _______2 GP 1670 GARDNER DENVER ADL Air

Compressor

_______ _______ _______2 GP 1671 GARDNER DENVER ADL Air

Compressor

_______ _______ _______2 GP 1672 FORUM 8" x 6" Mud Hog Cent

Pump p/b 100HP Elec Motorw/Belt Drive

_______ _______ _______2 GP 1673 GORMAN RUPP Super T Series

Trash Pump p/b 40HP ElecMotor, Skidded w/Lifting Frame

_______ _______ _______2 GP 1674 GORMAN RUPP Super T Series

Trash Pump p/b 40HP ElecMotor, Skidded w/Lifting Frame

_______ _______ _______2 GP 1675 (8) Cent Pumps

_______ _______ _______2 GP 1676 (2) ALLISON Hyd Gearboxes

f/DETROIT Eng

111



_______ _______ _______2 GP 1677 (2) ALLISON Hyd Gearboxes

f/DETROIT Eng

_______ _______ _______2 GP 1678 R CUSHMAN 280B Hyd Gearbox

_______ _______ _______2 GP 1679 PARKER B5XS PTO Output

f/ALLISON Trans (UNUSED)





_______ _______ _______2 GP 1682 PARKER B5XV PTO Gearbox

(UNUSED)

_______ _______ _______2 GP 1683 (2) ROPER 4517 3" Gear Pumps

w/PTO Drive (UNUSED)

_______ _______ _______2 GP 1684 (6) 5" 5000# Flanges

_______ _______ _______2 GP 1685 Basket of Asst'd Drill Pipe

Stripping Rubbers

_______ _______ _______2 GP 1686 (2) 4-Way Manifolds

112



_______ _______ _______2 BB 1687 (x) 2012 FORD F-250 Crew Cab

Pickup, VIN-1FT7W2BT3CEB23086, p/b 6.7Powerstroke Eng, Auto Trans,LT235/70R17 Tires (Inoperable)(1123086)

_______ _______ _______2 BB 1688 (x) 2012 FORD F-250 Crew Cab

Pickup, VIN-1FT7W2BT1CEB23085, p/b 6.7Powerstroke Eng, Auto Trans,LT235/70R17 Tires (Inoperable)(1123085)

_______ _______ _______2 BB 1689 (x) 2012 FORD E-Series Van, VIN-

1FTNE2EL5CDA58933, p/b FORD6.4 Gas Eng, Auto Trans,LT245/75R16 Tires

_______ _______ _______2 BB 1690 (x) 2011 FORD F-150 4x4 4-Door

Pickup, VIN-1FTFW1EF28KD94992(Inoperable) (1194992)

113



PRODUCTION EQUIPMENT

_______ _______ _______1 CN 1691 2011 DOYLE'S PRODUCTION

24" x 64" 10,000# Separatorw/(3) 1-1/2" 10,000# Outlets, AllMtd on Virtual Shipping Stand









_______ _______ _______18 CK 1696 GARDNER DENVER PE-5 Triplex

Pump w/Bronze Fluid End p/bElec Motor, Skidded

_______ _______ _______18 CK 1697 GASO 1800 2-12" x 4" x 6"

Duplex Pump p/b Elec Motor

114



_______ _______ _______18 CK 1698 (2) BJ 6" x 8" Cent Pumps p/b

50HP Elec Motor, 1-1/2" CentPump p/b Elec Motor & 3"Diaphragm Pump

_______ _______ _______2 BJ 1699 Compressor Skid w/ELGI 1.50

Screw Compressor, S/N-251075,p/b 350HP Elec Motor, 2001COOLER SERVICE H54S Air-Cooled Heat Exchanger, 2001GBF 1025 Vert DischargeScrubber, 230 Max PSI, 2001GBF 1026 Vert Suction ScrubberVessel, 125 Max PSI, KIMRAY618 FGT Gas Regulator, 250 MaxPSI, KIMRAY 418FGTPD GasRegulator, 220 Max PSI, AllSkidded

_______ _______ _______2 BJ 1700 Compressor Skid w/QUINCY

4125 Compressor p/b NORTHAMERICAN 30HP Elec Motor,Vertical Suction Vessel, ControlPanel & Gauges, Skidded


4125 Compressor p/b TOSHIBA25HP Elec Motor, Vert SuctionVessel, Control Panel & Gauges,Skidded


4125 Compressor p/b TOSHIBA25HP Elec Motor, Vert SuctionVessel, Control Panel & Gauges,Skidded

115




4125 Compressor p/b 25HP ElecMotor, Vert Suction Vessel,Control Panel & Gauges,Skidded


4125 Compressor p/b 25HP ElecMotor, Vert Suction Vessel,Control Panel & Gauges,Skidded

_______ _______ _______2 BJ 1705 Compressor Skid w/QUINCY 240

Compressor p/b TECHTOP 5HPElec Motor, Vert Suction Vessel,Control Panel & Gauges,Skidded


Compressor p/b TOSHIBA 5HPElec Motor, Vert Suction Vessel,Control Panel & Gauges,Skidded


Compressor p/b CROWNTRITON 15HP Elec Motor, VertSuction Vessel, Control Panel,Skidded


Compressor p/b NORTHAMERICAN 20HP Elec Motor,Vert Suction Vessel, ControlPanel, Gauges, Skidded

116



_______ _______ _______2 BJ 1709 Compressor Skid w/2013

HARSCO Air-Cooled HeatExchanger, LOUIS ALLIS 75HPElec Motor, Controls, Skidded

_______ _______ _______2 BJ 1710 Compressor Skid w/R&R Air-

Cooled Heat Exchanger,WORLDWIDE 75HP Elec Motor,(2) Vert Vessels, Air VolumeTank, Controls & Gauges,Skidded

_______ _______ _______2 BJ 1711 Compressor Skid w/R&R Air-

Cooled Heat Exchanger, TECO150HP Elec Motor, (3) VertVessels, Air Volume Tank,Controls & Gauges, Skidded

_______ _______ _______2 BJ 1712 Compressor Skid w/TOSHIBA 30

H Elec Motor, Vert Vessel,Controls, Skidded

_______ _______ _______2 BJ 1713 R&R 4487K Air-Cooled Heat

Exchanger (UNUSED)

_______ _______ _______2 BJ 1714 Compressor Skid w/TECHTOP

30HP Elec Motor, Vert SuctionVessel, Controls, Gauges,Skidded

_______ _______ _______2 BJ 1715 BALDOR M4413T-4 60HP Elec

Motor

117



_______ _______ _______2 BJ 1716 BALDOR M4413T-4 60HP Elec

Motor

_______ _______ _______2 BJ 1717 QUINCY 4125 Compressor

_______ _______ _______2 BJ 1718 (4) Pallets Consisting of

KOBELCO 192 CompressorParts & QUINCY 240Compressor Parts

_______ _______ _______2 BJ 1719 (2) GE CR341E0 Pumping Plant

Control Panels w/Digital OutputPanels, All Mtd on ShippingStand, (2) MURPHY 50-30-9971Pumping Plant Control Panelsw/Digital Output Panels, Ea Mtdon Shipping Pads

_______ _______ _______2 BJ 1720 AIR-X-CHANGER 18-VV Air Heat

Exchanger p/b 1-1/2HP ElecMotor, ALTRONIC PumpingPlant Control Panel, MURPHY 50-30-2415 Pumping Plant ControlPanel, KIMRAY 61FGTPRB GasRegulator

_______ _______ _______2 BJ 1721 (2) SULLIVAN & SONS S&S867

Air-Operated InstrumentationValves w/SULLIVAN & SONS3300 Smart Positioner Controls

_______ _______ _______12 GP 1722 (12-31) WORTHINGTON CORP

Compressor, S/N-L70817,w/Scrubber, ACE Air Exchanger,Belt Drive, Skidded

118



_______ _______ _______12 GP 1723 (12-32) KNOX WESTERN

Compressor, 6" Bore Max PSI350 w/DEBER Separator, FIN-XAir Cooler, Skidded

_______ _______ _______1 AB 1724 (2) 7-1/16" 10,000# Wellheads,

Ea w/(2) 2-1/16" 10,000# GateValves

_______ _______ _______1 CS 1725 Asst'd 2" Fig. 1502 Tees &

Crosses

_______ _______ _______1 AB 1726 (5) Pallets Consisting of Pipe

Dope, Centralizers, Wellhead &Fittings, Fiberglass Fittings

_______ _______ _______18 CK 1727 LUFKIN TCA 35A (228) Pumping

Unit

_______ _______ _______18 CK 1728 COOK 57,000# Pumping Unit

_______ _______ _______18 CK 1729 CABOT AODR13YSPB (114DB)

Pumping Unit

_______ _______ _______18 CK 1730 PARKERSBURG 48-CH80D-133-

WB5 Pumping Unit

_______ _______ _______18 CK 1731 Approx 80D Sgl Reduction

Pumping Unit (SAMPSON PostOn Other End of Yard)

119



_______ _______ _______18 CK 1732 CHURCHILL 8M-40-89-36

Pumping Unit

_______ _______ _______18 CK 1733 BETHLEHEM 16D Pumping Unit

_______ _______ _______18 CK 1734 CHURCHILL 6M16-53-30

Pumping Unit

_______ _______ _______18 CK 1735 AMERICAN R4-22 (25D) Pumping

Unit w/Elec Motor (Incomplete)

_______ _______ _______18 CK 1736 LCM 114 69,500# Chain Dr

Pumping Unit (Crank ArmBroken)

_______ _______ _______18 CK 1737 SENTINEL 25S67DG36 Pumping

Unit

_______ _______ _______18 CK 1738 AMERICAN T10D (D57A)

Pumping Unit

_______ _______ _______18 CK 1739 BETHLEHEM 16D-B5-22

Pumping Unit

_______ _______ _______18 CK 1740 NATIONAL 35D Type D-7SN-

25DP Pumping Unit (Note:Missing Horse Head)

_______ _______ _______18 CK 1741 COOK JC-500 (16D) Pumping

Unit w/Elec Motor (Note: MissingHorse Head)

120



_______ _______ _______18 CK 1742 PETERSON 16 Pumping Unit

_______ _______ _______18 CK 1743 EMSCO DA-25 Pumping Unit

(Missing 1 PITTMAN & HorseHead)

_______ _______ _______18 CK 1744 COOK D25 Pumping Unit

_______ _______ _______18 CK 1745 LUFKIN TC-44S Sgl Reduction

Pumping Unit

_______ _______ _______18 CK 1746 AMERICAN 7500# D25A Sgl

Reduction Pumping Unit

_______ _______ _______18 CK 1747 (3) FAIRBANKS MORSE 503

Pumping Unit Engs


Pumping Unit Engs, (1)w/Broken Lid (Note: SomeIncomplete)


Pumping Unit Engs, (3)Incomplete


Pumping Unit Engs

_______ _______ _______18 CK 1751 (2) WITTE CRC & (1)

CONTINENTAL EMSCO CE106Pumping Unit Engs

121



_______ _______ _______18 CK 1752 (2) AJAX 5" x 6-1/2" & (1)

OILWELL E20RC Pumping UnitEngs

REAMERS/BIT BREAKERS/LIFT NUBBINS

_______ _______ _______2 GP 1753 36" Shopmade Open Hole

Reamer w/TCI


Reamer w/TCI


Reamer w/TCI


Reamer w/TCI


Reamer w/TCI & MT


Reamer w/MT


Reamer w/TCI


Reamer w/TCI

122



_______ _______ _______2 GP 1761 28" Open Hole Reamer w/Bladed


Reamer w/Bladed


Reamer w/Bladed


Reamer w/Bladed


Reamer w/Bladed

_______ _______ _______1 AC 1766 (8) Bit Breakers, (1) 8-3/8" to 9",

(1) 11-3/4" to 12-1/4", (1) 9-5/8"to 9-7/8", (1) 12" to 12-1/4", (1) 8-3/4", (1) 7-5/8" to 7-7/8", (1) 8-3/4" & (1) 9-3/8"

_______ _______ _______1 AC 1767 (5) Bit Breakers, (1) 8-3/8" to 8-

5/8", (1) 12-1/4", (1) 9-5/8" to 9-7/8", (1) 7-5/8" to 7-7/8" & (1) 10-5/8" to 11"

_______ _______ _______1 CS 1768 (13) Bit Breakers, 5-7/8" to 12-

3/4"

_______ _______ _______5 BS 1769 (5-86) (5) Tri-Cone Bit Breakers,

(2) 12" to 12-1/4", (1) 9-1/2" to 9-7/8" & (2) 7-1/2" to 7-7/8"

123




(3) 8-3/4", (1) 9-1/2" & (1) 13-1/2"


(3) 9-1/2" to 9-7/8", (2) 6-1/2" to 6-3/4"


11-3/4" to 12-1/4", 13-1/2", 12" to12-1/4", 9-5/8" to 9-7/8", 6-1/2" to6-3/4"


6-1/2" to 6-3/4", (3) 7-5/8" to 7-7/8", 12-1/4"


(3) 9-1/2" to 9-7/8", 12-1/4", 13-3/4"


17-1/2" to 18", (2) 6-1/2" to 6-3/4", (2) 9-5/8" to 9-7/8"


15-1/2", (2) 10-5/8" to 11", 9-5/8"to 9-7/8"


15", 12" to 12-1/4", (2) 10-5/8" to11"

124




(3) 12" to 12-1/4", 9-1/2" to 9-7/8", 8-3/4" to 9"


11-3/4" to 12-1/4", (2) 9-1/2" to 9-7/8", 8-3/4" to 9", 6-3/4"


9-5/8" to 9-7/8", (2) 9-1/2" to 9-7/8", 8-3/4", 7-7/8"


13-1/4", 10-5/8" to 11", 9-1/2" to9-7/8", 8-3/4" to 9", 7-7/8"


13-3/4", 11-3/4", (2) 7-5/8" to 7-7/8", 6-1/2" to 6-3/4"


12-1/2", (2) 7-5/8" to 7-7/8", 8-3/4" to 9"

_______ _______ _______5 BS 1784 (5-101) (12) Steel Lift Nubbins

w/6-5/8"Reg & 7-5/8"Reg Conn


w/6-5/8"Reg & 7-5/8"Reg Conn


w/6-5/8"Reg & 7-5/8"Reg Conn

125




w/6-5/8"Reg & 7-5/8"Reg Conn


w/6-5/8"Reg & 7-5/8"Reg Conn


w/6-5/8"Reg & 7-5/8"Reg Conn


w/6-5/8"Reg & 7-5/8"Reg Conn

_______ _______ _______5 BS 1791 (5-108) (21) Asst'd Steel Lift

Nubbins

END DAY TWO

126

BIDDING TERMS/CONDITIONS1. Bidder RegistrationAll Bidders must register and receive a bidder number at each Superior Energy Auctioneers’ auction. Anyone bidding on behalf of a third party MUST rregister and will be held personally responsible and liable for all purchases. No agency relationships will be honored. No bids should be placed on any item you own or on behalf of any owner. Only the highest bidder will be able to purchase any item placed for auction by the Auctioneer. Superior Energy Auctioneers has the right to deny anyone a bidder number and may also retract bidding privileges for any reason at any time and for any reason. Any information about a Buyer or a Seller/Consignor is confidential.

2. Payment TermsAll purchases are to be “PAID IN FULL” in negotiable U.S. Funds upon receipt of invoice. Company or Personal Checks, Cashier’s Checks or Wire Transfers are the only acceptable forms of payment. Bank wires and company or personal checks will be accompanied by a “BANK LETTER OF GUARANTEE” guaranteeing payment. Ownership of Lot transfers to Bidder when Auctioneer says “SOLD”. The Buyer waives the right to stop payment on any check or wire transfer given as payment. No cash, drafts, credit cards or ACH payments will be accepted. The Buyer may receive their equipment purchases upon completion of payment (check-out information can be found on the inside cover of the auction catalog). The Auctioneer reserves the right to hold ALL equipment until ALL funds have cleared the Auctioneer’s Bank and to hold ALL equipment on any partial payment. A late fee may be assessed if payment is not received in full within (5) business days of receipt of your invoice. Contact Sue Schmidt at [email protected] regarding your Bank Letter of Guarantee.

3. Sales TaxSales Tax will be charged on all purchases, unless the Buyer provides the proper exemption documents required by the local Government Tax Agency where the assets are located. Buyer agrees to pay all applicable sales tax on all purchases, unless they meet the requirements mentioned above. Buyer also agrees to pay any sales tax that may be assessed after initial payment has been received. International Buyers must pay the sales tax as shown on your invoice. Proper documentation must be provided in a timely manner to assist in obtaining any sales tax refund. *See Bill of Lading Requirements on our website

4. Administrative FeesA 5% Administrative Fee will be charged on all purchases made at the official sale site location. There will be an additional 3% (total 8%) fee for Internet purchases*See Auction Brochure or website for details

5. Warranties or GuaranteesALL items are sold “AS IS, WHERE IS, WITH ALL FAULTS” without a warranty or guarantee of any kind, whether written, expressed or implied as to merchantability or fitness for a particular purpose or intent. Any reference to year, make, model, serial number, condition, mileage, performance, lot numbering, and digital slides are provided as accurately as possible from sources believed to be reliable. The Buyer is wholly responsible to inspect items and accepts upon placement of a bid any item in its current condition with any and all faults or defects known or not known. Neither Superior Energy Auctioneers or the Seller shall be held liable for any defects or inaccuracies. Buyer specifically releases Auctioneers of any liability arising from the lack of merchantability or fitness of use or condition of any item purchased upon bid registration. All announcements on sale day take precedence over all printed material. Neither Superior Energy Auctioneers or the Seller accept any liability for loss or damage howsoever arising from any Lots withdrawn, cancelled or not presented for sale. Bidding on any item confirms that you have inspected the equipment and you know what you are bidding on and have accepted and agreed to these bidding terms and conditions and specifically waives any claims arising there from. Upon acceptance of Buyer’s high bid, Buyer is responsible to insure equipment purchased and Auctioneer shall not be responsible for loss or damage.

6. Indemnification & Hold Harmless/Injury & DamagesThe auction site shall include any yard or location at which any lot is located as well as the location where the auction bidding is conducted. The Bidder, Agents, Representatives or Employees agree to enter any site at their own risk. Bidders, Bidders party, Agents, employees or representatives agree to Hold Harmless and Indemnify and defend Superior Energy Auctioneers, its employees, its agents, its representatives, its sellers and its site owners for any injury, damages or loss of life which may occur on an auction site or arising from an auction. The Buyer also agrees to the same terms for load-out and check-out on all auction sites, and if requested, buyer will provide applicable Certificate of Insurance prior to load-out.

7. Contested or Tie BidsThe high bidder for each lot shall be the Buyer, and in the event two (2) or more Bidders claim the same lot after the Auctioneer has declared an item sold, the Auctioneer may re-open the sale of said item and allow bidding to continue between those Bidders until a high bidder is determined. The re-opening of any bid will be at the sole discretion of the Auctioneer, who may also decide not to re-open a bid if a bid was considered late and the item was clearly sold. The Auctioneer may also refuse any bid considered a mere fractional advance. The Auctioneer reserves the right to group, batch, withdraw, create or break-apart any lot.

8. Resale of Merchandise/Abandoned MerchandiseThe Auctioneer reserves the right to reclaim any or all merchandise for any unpaid purchases in part or in full. In the event a Buyer chooses to resell a lot, they must make up any shortages from the initial sales price as well as pay any expenses, including but not limited to attorney fees, that result from equipment having to be resold. The resale of any merchandise is at the lone discretion of the Auctioneer. Any lots or equipment not picked up by any Buyer or left beyond the stated check-out period will be considered abandoned property and may be resold or otherwise disposed of by Auctioneer. Superior Energy Auctioneers reserves the right to charge or asses any fees incurred which arise from an abandonment of property and Buyer specifically releases Auctioneer of any claim or liability arising from any equipment purchased and abandoned including without limitation, any claim for a refund or return of monies used to purchase abandoned equipment.

9. Titles/Bills of SaleFollowing collection of all money owed, Superior Energy Auctioneers will mail by USPS Certified Mail all titles and bills of sale to the Buyer within a reasonable time period following the auction.

10. Charges for Late Pickup of LotsAll purchases MUST BE removed during posted check-out period. Any lots or partial lots that are not claimed by the end of the check-out period will be considered abandoned and may be re-claimed and sold for storage costs at Superior’s discretion. The Auction Company, Seller or yard Owner are not at fault for any injury, damage or loss during or after the check-out period. Late pickup may result in a $25.00 or more per lot per day charge. A storage lien will incept on the first day after the expiration of the posted check-out period without notice.

11. Load-Out/Transportation DisclaimerNeither Superior or the Seller(s) are involved in any part of Load-Out or Transport. The responsibility of any load-out or transport arrangements and charges are the sole responsibility of the Buyer. Neither Superior or the Seller(s) should be considered the Shipper, Consignor or Consignee. Certificate of Insurance may be required prior to load-out.

12. AgreementThis Agreement is between the Bidder and the “Auctioneer” (Superior Energy Auctioneers) and shall be governed by and interpreted by the laws of the State of Texas. Venue for any dispute arising between Auctioneer and any Buyer, Bidder, Shipper, Consignor or Consignee or agent representing the same will be limited to Comal County, Texas and may be referred to Arbitration by either party prior to the filing of any suit or subsequent thereto. Any fees incurred by Superior Energy Auctioneers in the enforcement of these terms and conditions shall be assessed against Bidder as damages for which Superior will seek recovery. By registering for this auction, the Bidder understands and agrees to abide by all Terms and Conditions as stated herein.

Documents

Oilfield & Heavy Equipment For Sale At Auction! - OKLAHOMA … · 2019. 11. 19. · Well Control Equipment Casing & Drill Pipe Handling Tools Auxiliary Equipment Yard 5 Auxiliary