Upload
phamkhue
View
232
Download
1
Embed Size (px)
Citation preview
OH BABY VENDOR MANUAL
Oh Baby Vendor Manual
2
Table of Contents
OH Baby Care Label Information: pg. 3-4
OH Baby Price Ticket Information: pg. 5-8
OH Baby Hangtag & Label Information: pg. 9-17
OH Baby Packaging Information: pg. 17-20
OH Baby Poly Bag Information: pg. 20-22
OH Baby Hanger and Crown Sizer Information: pg. 22-26
OH Baby Hanging and Folding Requirements: pg. 27-44
OH Baby Packing Requirements for Bras: pg. 45
OH Baby Carton Requirements: pg. 46-49
OH Baby Testing Requirements: pg. 49
OH Baby Charge Back Policy and Procedures: pg. 49
OH Baby Photo Shoot Sample Policy: pg. 49
Mainetti Group-Contact Information: pg. 50-57
Oh Baby Vendor Manual
3
OH BABY BRAND CARE LABEL INFO
Oh Baby Vendor Manual
4
*EXAMPLE OF A CARE LABEL WITH “2-PIECE GARMENT”
*EXAMPLE OF A CARE LABEL (BRA)
Oh Baby Vendor Manual
5
OH BABY BRAND PRICE TICKET INFO
For the initial orders only, all labels are ordered from Avery Dennison. The contact is Alina Liu and she can be e-mailed at [email protected]. Delivery is approximately 2 weeks and the prices are FOB Los Angeles, California, U.S.A. To order “Size” and “Country of Origin” labels, communicate the country and sizes needed. There is no label number for either of these.
Prices for the initial orders of “Main” labels are as follows: MW-OB-WOVEN-TOPS Oh Baby Top Sew $57.50/per thousand MW-OB-WOVEN-PANT Oh Baby Side Sew $61.50/per thousand
Prices for the “ Country of Origin” and “Size” labels are as follows: U.A.E. $25.35/per thousand Philippines $32.00/per thousand India $27.70/per thousand Sri Lanka $30.00/per thousand
Bangladesh $24.20/per thousand Turkey $21.85/per thousand Mexico $21.00/per thousand Guatemala $21.85/per thousand Oh Baby labels can be developed by different sources only after the initial shipment. Labels developed for
later shipments must be submitted and approved by the Vendor Relations Manager at Destination Maternity Corporation.
OH BABY PRICE TICKET FORMAT:
Oh Baby Vendor Manual
6
Oh Baby Vendor Manual
7
Item Ticket Placement Exceptions
Bottoms Inject hangtag through the wearer's left side seam 1” below waistband
Leather: Inject in Size/COP label in center back of waistband
Bras Inject or tack hangtag at the base of the wearer's left strap none
Camisoles Inject hangtag through size or COP label in neckline.
Label free garments: Inject in the underarm seam of the wearer's left arm
Dresses Inject hangtag at bottom of wearer's left sleeve none
Dresses: Sleeveless Inject hangtag through size or COP label in neckline.
Label free garments: Inject in the underarm seam of the wearer's left arm
Extra Button Placement
Place extra button in tiny, clear ziplock bag. Place behind hangtag and inject with same attachment allowing tag to hang over waistband on outside of garment. none
Outerwear Inject hangtag at bottom of wearer's left sleeve
Leather: Inject in the inside seam at the bottom of the wearer's left sleeve or seam in sleeve lining. Care taken not to damage the leather
Overalls Inject hangtag at the wearer's left wasitband side seam. none
Panties Inject hangtag using 1/2" attachment through wearer's left side.
Joker tags with integrated barcodes are allowed
Robes Inject at bottom of wearer's left sleeve. none
Shortalls Inject hangtag at wearer's left waistband side seam. none
Sleepwear Inject hangatg at bottom of wearer's left sleeve. none
Sleevless Tops Inject hangtag through size or COP label in neckline.
Label free garments: Inject in the underarm seam of the wearer's left arm
Sweaters Inject in the size or COP label in the neckline. none
Swimwear Seperates Wearer's left underarm or left waistband side seam. none
Swimwear Sets In the size or COP label. none
Tank Tops Inject hangatg through size or COP label in neckline.
Label free garmnets: Inject in the underarm seam of wearer's left arm
Tops:Knit or Woven Inject hangatg in bottom of wearer's left sleeve Juniors: Inject in neckline through label or sewn in loop
Turtlenecks Inject in the size or COP label in the neckline with a 5" attachment. none
Vests Inject hangtag in bottom of wearer's left armhole.
Leather: Inject through the size/COP label inside neckline
Oh Baby Vendor Manual
8
RETAIL TICKET PLACEMENT cont’d
Retail and/or vendor logo hang tags must be injected securely to the garment following the placement directives listed above:
• Use 2” clear injectors for children’s garments • Use 3” clear injectors for adult garments • Use 5” clear injectors for all turtlenecks • Retail price tags must face up on any folded garment being placed in a poly bag. • Price tickets use paper quality as DMC. Please ensure that the perforation on the ticket does not disturb the UPC code.
• Price ticket size is 1 ½” X 2 ¾” • Do not use safety pins • Place extra buttons in a small poly bag and inject it to the garment along with the hang tags
• Price Tickets MUST be visible through poly bag for all order types
Oh Baby Ticket Placement – Hanger Flat Packs • Please follow guidelines listed on page 6 above.
OH BABY TICKET PLACEMENT – E-Commerce Flat Packs
• Please follow guidelines listed on page 6 above.
ALL E-COMMERCE: NO E-COMMERCE ORDERS WILL HAVE ANY TYPE OF HANGER; BRAS THAT ARE NORMALLY SHIPPED ON HANGERS WILL NOT HAVE HANGERS FOR E-COMMERCE SHIPMENTS.
Tickets for Apparel Sets:
• When ticketing sets of multiple apparel items, the main retail tag should state “2 PC Set” or “3 PC Set”
• Place the price ticket on the top item of the set (i.e. shirt, jacket, vest, swimwear, sleep gown or robe).
• Additional tickets are required on the second and/or third piece garment of the set that states:
o 2 PC or 3 PC Set o Color o Label Name o Style Number o Size o NO BAR CODE AND NO RETAIL
� Note: $0.00 is NOT permitted on the additional ticket.
Oh Baby Vendor Manual
9
OH BABY BRAND HANGTAG INFORMATION
Oh Baby Vendor Manual
10
PLEASE NOTE: If a marketing hangtag has been designated for an item it should be attached to the garment in the same spot as the price ticket, but will be under the price ticket. The first thing the customer should see will
be the price ticket. NOTE: The hangtag must be front side face up.
• For Belly hangtags please reference diagrams below. OH BABY LABEL AND HANGTAGS INFO CONT’D
If the buyer has specified a marketing hangtag for orders a 3” barb must be used. PLEASE NOTE: If a marketing hangtag has been designated for an item it should be attached to the garment in the same spot as the price ticket, but will be under the price ticket. The first thing the customer should see will be the price ticket. Please see below for new marketing hangtags; please follow PLM instructions for specific hangtags that are required on the garments.
COMPONENT # DESCRIPTION
LB-OBG-TS MAIN LABEL TOP SEW
LB-OBG-SS MAIN LABEL SIDE SEW
TG-OBGRYGEN GENERIC HANGTAG
TG-OBGRYWP GENERIC PLUS HANGTAG
TG-OBGRYSF SECRET FIT HANGTAG
TG-OBGRYSFP SECRET FIT PLUS HANGTAG
TG-OBGRYMID MID BELLY HANGTAG
TG-OBGRYUND UNDER BELLY HANGTAG
TG-OBGRYNUR NURSING HANGTAG
TG-OBGRY2PC 2 PIECE SET HANGTAG
TG-OBGRY3PC 3 PIECE SET HANGTAG
TG-OBGRYPET PETITE HANGTAG
MAIN LABEL TS MAIN LABEL SS
Oh Baby Vendor Manual
11
FRONT BACK
FRONT BACK
Oh Baby Vendor Manual
12
FRONT BACK
FRONT BACK
Oh Baby Vendor Manual
13
FRONT BACK
FRONT BACK
Oh Baby Vendor Manual
14
FRONT BACK
FRONT BACK
Oh Baby Vendor Manual
15
FRONT BACK
FRONT BACK
Oh Baby Vendor Manual
16
Oh Baby Vendor Manual
17
OH BABY PACKAGING INFO
There are three (3) types of orders/packaging for Oh Baby.
1. Store Orders are flat packed on hangers and may be pre-packed or solid/color solid size, depending on if it is a store order or a bulk order. If needed, as in the case of beaded garments, cardboard may be placed between each pre-pack or bundle.
2. E-Commerce orders for internet orders are shipped flat pack, solid color, and solid size with each item in an individual poly bagged without hangers. Each bag must have a small gum price label placed in the center of the front side of the poly bag. They may be ordered from Avery Dennison or your own local
supplier. Avery Dennison’s style is KOH-9099-GN. If you order from a local supplier it must be submitted to the vendor relations manager at DMC for approval. Retail price hang tag is still required for the garment inside of the bag. Please see below chart for additional details.
Oh Baby Vendor Manual
18
*IF ORDERS ARE WRITTEN AS E-COMMERCE ORDERS (SOLID COLOR SOLID SIZE), EACH ITEM IS IN ITS OWN POLY BAG AND NO HANGER. THE BAG MUST BE SEALED. DO NOT USE RUBBER BANDS ON E-COMMERCE ORDERS.
POLY BAGS DO NOT NEED TO BE PERFORATED FOR E-COMMERCE ORDERS.
3. PRE-PACKS- orders by store (flat pack on hangers). USE ONE MASTER POLY BAG PER PRE-PACK. THE MASTER POLY BAGS SHOULD NOT BE RUBBER BANDED OR TIED TOGETHER; RUBBER BANDS AND TIES HAVE BEEN ELIMINATED AND MAY NOT BE USED ON ANY PURCHASE ORDER. THE CARTON WILL CONTAIN UNITS IN PRE-PAK RATIO BUT POLY BAG WILL NOT BE RUBBER BANDED OR TIED TOGETHER. PLEASE SEE PAGE 19 FOR HOW TO PACK A PRE-PACK.
Oh Baby Vendor Manual
19
SEE BELOW FOR PHOTOS ON HOW TO PACK PRE-PAKS. (ONE PRE-PACK PER CARTON)
Step-1: As per ratio 1:2:2:1 All 6 pc together. Step-2: For 6 pc; Put into one master poly.
Step-3: Close the poly 6pc in one poly. Step-4: Put this one pre pack in the carton
Step-5: Close the carton.
Oh Baby Vendor Manual
20
*Please note this is for all fabric Colorblock Garments.
OH BABY POLYBAG INFORMATION
° Poly bag should weigh from 0.00075 to .00125 inches, made of polyethylene and have a perforated shoulder.
° For hanging garments, please refer to page 17. Folded E-Commerce garments DO NOT require a center
perforation on poly bag. ° No pins, clips, tiebacks or chipboard are allowed. ° Poly bag wording: Please follow suggested wording on page 20. ° Poly bag should be sized to accommodate hangers where applicable. ° Poly bags must be sealed. If it is a shipment on hangers, the bottom of the poly bag should be sealed so
that the garments are completely protected.
Oh Baby Vendor Manual
21
Oh Baby Vendor Manual
22
*PERFORATION CAN BE ON CENTER FRONT AND BACK OF POLY BAG
OH BABY HANGER INFORMATION
° All hangers are to be ordered in BLACK (POLYPROPYLENE or POLYSTYRENE) matte color with the exception of:
° Sleep set with baby apparel attached i.e. baby onsie: The onsie is shipped on clear hanger. ° Intimates: are shipped on clear hangers
° Both hangers can be purchased from ALLIANCE, MAINETTE, SSI, VISCONTI or RANDY and these hangers are guaranteed to fit the MAINETTI SIZER. Although Kohl’s has other nominated hanger suppliers, these suppliers have not contracted to make hangers to fit the Mainetti Sizer.
° If outerwear or sweaters are shipped on hangers, they must be ordered from Mainetti. ° Please see below (pgs. 22-25) for hanger description and photos.
OH BABY CROWN SIZER INFORMATION
Kohl’s requires that all hangers have crown sizers.
• Baby Onsie DOES NOT get the crown sizer. Only the adult piece that is paired with the onsie will have the sizer.
• Crown sizers must be ordered from Mainetti. (Please see pgs 22-25 for list of contacts). • Style Number for 4-Sided Crown Sizer: CS1Q • Price is $1.50 per hundred
*NOTE: Style number for 2-Sided Crown Sizer CSI will no longer be available for purchase as of July 1st 2009
Oh Baby Vendor Manual
23
*”Bottoms”: This includes ALL bottoms: Pants, Cropped, Denim, Shorts, and Skirts.
(484CG)
Oh Baby Vendor Manual
24
Oh Baby Vendor Manual
25
Oh Baby Vendor Manual
26
Hanger Profile: Molded Fixed Hook, C Section, Clear in Color Material: Styrene or Styrene Blend
Product Category Size Suggestions Hanger Description Style# Hanger Profile
Intimate Apparel (Molded plastic hook; use with bras, panties, slips) *Style available only through Mainetti
Missy/Junior 10" Intimate Top/Bottom GS19
All Ranges 10" Intimate Top KCB*
All Ranges 10" Intimate Bottom KJN"
Plus Sizes 11" Intimate Top/Bottom GS11
All Ranges 10" Intimate Wrap Bottom (Comb) CW87
All Ranges 10" Three Pair Panty Hanger W345
10" Logo If Approved Only
Crown Sizer (use with all black wire hook hangers)
All Adult 4-Sided Print Crown Sizer
CS1Q (Mainetti)
38DD
38DD 38D
*All Intimate Apparel is shipped on CLEAR color Hangers
Oh Baby Vendor Manual
27
OH BABY HANGING AND FOLDING REQUIREMENTS
Oh Baby Vendor Manual
28
Oh Baby Vendor Manual
29
Oh Baby Vendor Manual
30
Oh Baby Vendor Manual
31
STEP 1: STEP 2:
STEP 3: STEP 4:
STEP 5: STEP 6:
Oh Baby Vendor Manual
32
Oh Baby Vendor Manual
33
Oh Baby Vendor Manual
34
Oh Baby Vendor Manual
35
OH BABY HANGER REVIEW FOR SWIM SUITS
`
Front View Back View
1 PC / Hanger # 6210 1 PC / Hanger # 6210
Front View Back View
2 PC / Hanger # 8212 2 PC / Hanger # 8212
Oh Baby Vendor Manual
36
Oh Baby Vendor Manual
37
OH BABY FOLDING INFORMATION FOR PANTS – GOH FLAT
PACK OR FLAT PACK OH BABY FOLDING INFORMATION FOR FLAT PACK TOPS – EXCLUDING SWEATERS AND FLEECE TOPS Garment size after folding will be 9” W x 12” L Step 1: Lay top face down on a flat surface. Step 2: Center a board/template over the top
Step 3: Fold left side over so that the sleeve meets the right edge of the garment. Step 4: Repeat step 3 with the other side of the garment. Step 5: Fold bottom of garment up to required fold size of 9” wide x 12” long (template s/b smaller). Step 6: Turn garment over, place in poly bag.
Oh Baby Vendor Manual
38
OH BABY FOLDING INFORMATION FOR FLAT PACK TOPS – SWEATERS AND FLEECE TOPS Garment size after folding will be 11” W x 14” L Do not use a template
Oh Baby Vendor Manual
39
Option A Option B *Both folding methods Options A & B are acceptable; please choose the most appropriate for poly bag size.
Oh Baby Vendor Manual
40
Oh Baby Vendor Manual
41
Oh Baby Vendor Manual
42
Oh Baby Vendor Manual
43
Oh Baby Vendor Manual
44
Oh Baby Vendor Manual
45
OH BABY PACKING REQUIREMENTS FOR BRAS
Oh Baby Vendor Manual
46
Oh Baby Vendor Manual
47
OH BABY CARTON REQUIREMENTS
The most important thing to remember in packing cartons is do not over-pack, as hangers will break. Do not under-pack the cartons as merchandise will shift in transit and will not be presentable for immediate placement on floor. The following is the SUGGESTED number of pre-packs, per master carton, by product. This can also be used as a guideline for the solid color and solid size carton quantities, per master carton. NO SHORTAGES ARE ALLOWED. A MAXIMUM OF 3% OVERAGE IS ALLOWED, BUT IF ITEM IS A PRE-PACK THE OVERAGE MUST BE COMPLETED PRE-PACKS. ALL QUANTITY VARIANCES MUST BE PRE-APPROVED BEFORE SHIPMENT. ANY CANCELLATIONS OR SHORTAGES GREATER THAN 3% WILL GENERATE A CHARGEBACK OF 50% OF THE FOB COST FOR THE PIECES/PRE-PACKS MISSING (OR 50% OF THE LDP COST, DEPENDING ON THE TERMS OF THE ORDER). ANY OVERAGES, GREATER THAN 3%, NOT APPROVED IN ADVANCE OF SHIPMENT, WILL RESULT IN NON-PAYMENT.
OH BABY CARTON INFORMATION o SINGLE CARTONS
o Carton walls must be double wall and burst strength must be 250 pounds on all cartons.
o Cartons must have minimum edge crush (ECT) 45. Cartons must be labeled with their ECT and/or bursting strength certification.
o Carton size for tops, dresses is 18” W x 20” L x 11” H. (minimum 3” height is allowed) o Carton size for bottoms is 13” W x 20” L x 11” H. (minimum 3” height is allowed) o Carton maximum weight is 40 lbs. on all cartons. o Carton strapping is not allowed.
o PRE-PACK CARTONS o Carton walls must be double wall and burst strength must be 250 pounds on all cartons. o Cartons must have minimum edge crush (ECT) 45. Cartons must be labeled with their ECT and/or
bursting strength certification. o Carton size for tops, dresses is 18” W x 20” L x 3” minimum or 10” maximum H. o Carton size for bottoms is 13” W x 20” L x 3” minimum or 10” maximum H. o Must Ship at least 50% Full. o ONE PRE-PACK PER CARTON ONLY IS ALLOWED
*Each pre-pack must be grouped in pre-pack formation (for example 1-2-2-1) and then laid in the box. Vendors are not allowed to group all sizes together as one pre-pack in the carton
o Carton maximum weight is 40 lbs. on all cartons. o Carton strapping is not allowed.
o E-COMMERCE CARTONS o Carton walls must be double wall and burst strength must be 250 pounds on all cartons.
o Cartons must have minimum edge crush (ECT) 45. Cartons must be labeled with their ECT and/or bursting strength certification.
o Carton size is 16” W x 24” L x 11” H. (minimum 3” height is allowed) o Carton maximum weight is 40 lbs. on all cartons. o Carton strapping is not allowed.
Carton height for all cartons can be as low as 3” as long as Carton Label is affixed correctly. Please see photo below.
Oh Baby Vendor Manual
48
OH BABY CARTON MARKINGS
° On both long sides, we need the below information in BOLD PRINT. The words “OH BABY” should be 2” x 8” ideally, for brand recognition within the MWI warehouse.
OH BABY
Net Wgt.: ________________ Kgs. Gross Wgt.: ______________ Kgs.
° License Plates must also be used on the short sides of the carton
20” X 18” X 3” Carton Dimension
Oh Baby Vendor Manual
49
Kohl’s Private Brand Odd Lot Shipment Policy
OH BABY FABRIC/GARMENT TESTING (for all order types)
All standards and test are the same as Destination Maternity Corporation.
OH BABY CHARGE BACK POLICIES (for all order types)
Please go to Sect 9 of Destination Maternity Vendor Manual for a list of charge backs and procedures.
OH BABY PHOTO SHOOT SAMPLE POLICY
Oh Baby requires that 3 Photo Shoot Samples are submitted within 10 days of the Pre Pro approval. Photo Shoot samples must be sent marked attention OB Merchant Team. 2 Size Small Tops samples of each style in all colors/patterns/stripes on order
3 Size Small Bottoms samples of each style in all colors/patterns on order 2 Size 1X Tops samples of each PLUS style in all colors/patterns/stripes on order 3 Size 1x Bottoms samples of PLUS style in all colors/patterns on order 2 Size 36C or Medium samples of Bras in each color/pattern on order
Oh Baby Vendor Manual
50
MAINETTI GROUP-INTERNATIONAL OFFICES (www.mainetti.com)
MAINETTI ASIA
Hong Kong, Taiwan, South China Mainetti (HK) Limited 1812, Kwong Sang Hong Centre
151 Hoi Bun Road Kwun Tong, Kowloon Hong Kong Tel: (852) 2389-1589 Fax: (852) 2389-1077 E-mail: [email protected]
Attn: Mr. Keith Chow South Korea Mainetti Korea Co Ltd 3 Ra-820, Shi-Wha-Industry Complex 1370-4, Jung-Wang-1 Dong
Shi-Heung-City Kyung-Gi-Do, 429-854 South Korea Tel: (82) 32 815-3388 Fax: (82) 32 815-3498 E-mail: [email protected]
Attn: Mr. Keith Chow Shanghai Suzhou Mainetti Plastic Products Ltd Room 1002-1006 Electric Power Building
430 Xu Jia Hui Road, Shanghai China 200 025 Tel: (86) 21 6445-9266 Fax: (86) 21 6445-3866
E-mail: [email protected] Attn: Mr. John Leung/Ms. Brenda Ma Singapore (ASEAN Region) Mainetti Singapore Pte Limited 545 Orchard Road #10-08 Far East Shopping Center
Singapore 238882 Tel: (65) 6734-5188 Fax: (65)6736-1552 E-mail: [email protected] Attn: Ms. Grace Chen
Malaysia Mainetti (Malaysia) Sdn. Bhd. 18 Jalan Bistari 4, Taman Industrial Jaya 81300 Skudai,
Oh Baby Vendor Manual
51
Johor, Malaysia Tel: (607) 512 2868 Fax: (607) 511 2518
E-mail: [email protected] Attn: Ms. Michelle Boon Thailand Mainetti Pendy (Thailand) Limited 174/1 Moo1, Phetkasem Road
Tambol Yaicha, Amphur Sampran Nakhorathorn Province 73110 Thailand Tel: (66-34) 225 731 Fax: (66-34) 225 734 E-mail: [email protected]
Attn: Ms. Daranee Kanuengkijkong Indonesia PT Mainetti Indonesia Komplek Daan Mogot Baru Jalan Tampak Siring Blok LB5 No33
Jakarta Barat Indonesia Tel: (62-21) 544 0490/1 Fax: (62-21) 544 0492 E-mail: [email protected] Attn: Mr. Rusdi Santosa
Sri Lanka Mainettech Lanka (Pvt) Ltd 2 Gnaranartha Pradeepaya, Mawatha, Columbo 8
Sri Lanka Tel: (94) 169-5566 Fax: (94) 168-2338 E-mail: [email protected] Attn: Mr. Jeyan Perumal/Mr. Peter Vethanayagam
Bangladesh Mainetti (Bangladesh) Pvt Limited Standard Factory Building No. 1 Ground Floor, D.E.P.Z. Savar Bangladesh
Tel: +880 2-770-2026/770-2027 Fax: +880 2-770-2020 E-mail: [email protected] Attn: Mr. Rohit Fernandopulle/Mr. Chamira Wanigasinghe Dubai, UAE Mainetti UAE Office: Trade Link Middle East Ltd P.O. Box: 16953
Oh Baby Vendor Manual
52
LOB-1, Suite F-20 Jebel Ali Free Zone Dubai, UAE
Tel: (971) 4887-2666 Fax: (971) 4887-2665 E-mail: [email protected] Attn: Mr. Syed Mohammed Ali India Mainetti (India) PVT Ltd #58D, SIDCO Industrial Estate Ambattur, Chennai 600 098 South India Tel: (91) 44 2625-2852 Fax: (91) 44 2625-2842
E-mail: [email protected] Attn: Mr. Rajesh Menon/Ms. Khudsia Tirupur Branch #31 Ground Floor Om Shakthi Kovil Street
Kongu Nagar Tirupur - 641 607 Tel: (91) 421 222-8467 Fax: (91) 421 532-2412 Sales & Marketing Office – Delhi
Mainetti (India) Pvt Ltd 1012 & 1013 “GALLARIA” Dif – Phase IV Gurgaon – 122 001 Tel: (91) 124 505-0961
Fax: (91) 124 505-0968 Pakistan Mainetti Pakistan (Private) Limited 4th Floor – 407, Business Avenue Plot No. 26-A, Block 6
PECHS, Sharah-e-Faisal Karachi, Pakistan Tel: (92)-21-431-3140/1 Fax: (92)-21-431-3144 E-mail: [email protected] Attn: Mr. Anis
MAINETTI ASIA (CONT.)
Vietnam Mainetti Vietnam Co Ltd Room No 7 Fosco Business Center
23 Phung Khac Khoan St Dis. 1 HCMC Vietnam Tel: (84) 882 57966
Oh Baby Vendor Manual
53
Fax: (84) 882 24744 E-mail: [email protected] Attn: Mr. Lam Chi Kien, Kent
MAINETTI EUROPE
United Kingdom Mainetti (UK) Ltd
Oxnam Road Jedburgh Roxburghshire Scotland, TD8 6NN UK
Tel: (44) 1835 862200 Fax: (44) 1835 864700 Attn: Mr. John Wilde/Mr. Nick Cranston Belgium Mainette BVBA Belgium
E Lambrechtslaan B-1780 Wemmel Belgium Tel: (32) 2460-4015 Fax: (32) 2460-6335 E-mail: [email protected]
Attn: Mr. Yves Michiels Holland Mainetti BV PO Box 313 5700 AH Helmond
The Netherlands Tel: (31) 492 596-100 Fax: (31) 492 596-199 / (31) 492 596-198 (Sales) E-mail: [email protected] Attn: Mr. Leo van Rooji
France Mainetti SA Zone Industrielle 14 rue de l`Epinoy
59175 Templemars France Tel: (33) 3 206 25858 Fax: (33) 3 209 69088 Attn: Mr. Jean-Paul Andreieff MAINETTI EUROPE (CONT.)
Italy Mainetti SpA Via Casarette nr.58 36070 Castelgomberto (VI) Vicenza
Oh Baby Vendor Manual
54
Italy Tel: (39) 0445 428511 Fax: (39) 0445 428627
Attn: Mr. Gianfranco Perin / Mr. Antonio Zanon Spain Nueva Mainetti SA Verda del Alquiton, No. 6-16 28500 Arganda del Rey
Madrid Spain Tel: (34) 91 871 9606 Fax: (34) 91 871 9392 Attn: Mr. Olivier Lepoutre
Portugal Pendy Plastic Products Lda – Portugal Terronhas – Recarei 4580 Paredes Portugal Tel: (351) 2 415 6634
Fax: (351) 2 415 6636 Attn: Mr. Julio Santos Romania Mainetti Romania S.R.L. Str Lector No 3
Sibiu 550245 Romania Tel: (40) 269 230 818/230-828 Fax: (40) 269 230-878
Egypt Mainette Ltd Tower 3 Hafez Ramadan St N City Cairo, Egypt Tel: (20) 2 271 4687 Fax: (20) 2 272 1777
E-mail: [email protected] Factory: 10th of Ramadan City Zone B2 Egypt Tel: (20) 15 360879 & 383460/1
Fax: (20) 15 383462 MAINETTI EUROPE (CONT.)
Morocco Mainetti – Smaco SA KM9, route d’El Jadida
Zl Lissasfa 20230 Casablanca, Marco Tel: (212) 22 914-955
Oh Baby Vendor Manual
55
Fax: (212) 22 911-674 E-mail: [email protected] Attn: Ms. Meryem Elamine
Turkey Mainetti A s Beylikduzu Mermerciler Sanayi Sitesi 2.Bulvar No: 22 Yakuplu-34904
Istanbul, Turkey Tel: (90) 212 875-0723 (7 lines) Fax: (90) 212 875-1241 E-mail: [email protected] Attn: Ms. Zeynep Yalnizoglu
MAINETTE AMERICAS
Canada Mainetti Canada Inc.
8272 19th Avenue, Montreal, Quebec, H1A 4J8 Tel: (1) 514 376-1876 Fax: (1) 514 376-4296 E-mail: [email protected]
Attn: Ms. Angela Lasciami Mr. John Le Piane United States, Mexico, Central & South America Mainetti, USA Inc. 37 Empire Street
Newark, New Jersey 07114 Tel: 973-273-0026 Cell: 908-917-1481 E-mail: [email protected] Attn: Mr. Andy Rupp
MAINETTI AMERICAS (CONT.)
Peru Mainetti Peru S.A.
Ave. Alvarez Calderon 180 Of: 07, San Isidro, Lima 27 Peru Tel: (51) 1440-3285 Fax: (51) 1221-5201 E-mail: [email protected]
Attn: Mr. Jimena Rojas Mainetti USA Inc. 4691 Lakeway Drive Belden, MS 38826
Oh Baby Vendor Manual
56
Tel: 662-844-8460 Fax: 662-884-8460 Cell: 662-790-5965
E-mail: [email protected] Attn: Mr. Don Boyd Mainetti USA Inc. 740 Brighton Way New Hope, PA 18938
Tel: 215-862-3537 Fax: 215-862-3537 Cell: 908-244-3393 E-mail: [email protected] Attn: Denise Gaudet
West Coast Distributor – (Western U.S.) Cal Supply 491 East Compton Blvd. Gardena, CA 90248 Tel: 310-532-2500 Fax: 310-327-1849
E-mail: [email protected] Attn: Mr. Mark Weinstein, President East Coast Distributor (East Coast and Southeast U.S.) HB Trim Co. Miami 9104 N.W. 105th Way
Medley, FL 33178 Tel: 305-836-6300 Fax: 305-836-2994 E-mail: [email protected] Attn: Ms. Jennifer Lesser
MAINETTI AMERICAS (CONT.)
Guatemala HB Trim Co. Guatemala Zona Franca Parque Industrial Zeta La Union Km 30.5, Carretera CA-9 Amatitlan, Guatemala C.A.
Tel: (502) 6633-2022/2021 Fax: (502) 6633-1560 E-mail: [email protected] Attn: Ms. Julieta Contreras – Operations Manager Dominican Republic HB Trim Co. Dominican Republic Km.5 ½
Oh Baby Vendor Manual
57
Carretera Santiago-Tamboril Santiago, Republic Dominicana Tel: (809) 570-8001/8002
Fax: (809) 570-8005 E-mail: [email protected] Attn: Ms. Erica Carlo – Operations Manager DR El Salvador & Honduras HB Trim Co. El Salvador (Serving El Salvador & Honduras)
Export Salva Free Z One, Edificio 18-C Km.24 Carretera a Santa Ana Colon, La Libertad, El Salvador Tel: (503) 318-8564 Fax: (503) 318-7907
E-mail: [email protected] Attn: Ms. Patricia Quinonez – Operations Manager Salvador Mexico Mainetti Mexico S.A. de C.V. Av. Mesa de Leon #116
Parque Industrial Queretaro Km 28.5 Carr. QRO-SLP Parque Industrial Queretaro C.P. 76220 Santa Rosa Jauregui, Qro Mexico Tel: (52) 442 240-9069
Fax: (52) 442 240-9066 E-mail: [email protected] Attn: Ms. Aida Bueno