OFFSHORE PLATFORM COATINGS: SELECTING AND · PDF fileOFFSHORE PLATFORM COATINGS: SELECTING AND SOURCING ... Offshore Platform Coatings: Selecting and Sourcing ... formerly with ENI

OFFSHORE PLATFORM COATINGS:SELECTING AND SOURCING

A JPCL eResource

jpclP A I N T S Q U A R E . C O M J O U R N A L O F P R O T E C T I V E C O A T I N G S & L I N I N G S

Offshore Platform Coatings: Selecting and Sourcing

A JPCL eBook

Copyright 2013 byTechnology Publishing Company2100 Wharton Street, Suite 310

Pittsburgh, PA 15203

All Rights Reserved

This eBook may not be copied or redistributed without the written permission of the publisher.

Introduction

Inorganic vs. Organic Zinc Primers for Offshore Platforms:

An End User’s Point of View

by Massimo Cornago, Consultant

Coating System Guide for Offshore Platforms

Coatings Company Profiles

Contents

iiContents

iv

1

5

11

Photo courtesy of Hempel

iv

Introduction

This eBook consists of a feature published in JPCL comparing zincprimers for Offshore Platforms, as well as JPCL Buying Guide material onselecting and specifying coatings for Offshore Platform applications invarious exposure environments.

The Buying Guide is organized by various exposure types, such as “Jacket Immersed Area,” for steel substrates. Then, coating manufacturersare listed in alphabetical order and their preferred system is named inboth proprietary and generic terms. Finally, contact details are given forall the companies.

This collection is designed to provide general guidance on selectingand specifying coatings for Offshore Platforms, and then to give sourcesfor acquiring the appropriate systems.

Introduction

Photo courtesy of Hempel

1

ue to the harsh environment at sea, good corrosion protection of offshore platformsis necessary to ensure that the design life of each structure is achieved. Success ofthe coating work depends on many aspects (paint specification, paint systemscertification, surface preparation, coating application, certified inspectors’ activity, etc.).Mainly, however, success of the coating depends on the environmental conditions

and the procedures used to counteract adverse environmental exposures during application. Sometimes it is not possible to have the best environment or, very often, to have enough time

reserved for the painting activities, so it’s necessary to have alternative approved paint systemsthat will give the same performance but can be applied in a shorter time. This article describesthe approach of one oil company in the selection of different paint systems for the corrosionprotection of offshore platform structures above the splash zone. In particular, the articlefocuses on the initial choice between different primers, either inorganic zinc or organic (epoxy)zinc at the newbuilding stage. The preliminary pre-qualification tests and the procedures adoptedwill be described. In addition, the use of a polyurethane topcoat instead of an epoxy/acrylic forthe maintenance system was evaluated.

Editor’s note: This article appeared in

JPCL in February 2012. The author was

formerly with ENI Exploration & Produc-

tion, SpA, Italy,

Inorganic vs. Organic Zinc Primers

for Offshore Platforms:

An End User’s Point of ViewBy Massimo Cornago,Consultant

D

iStockphoto

iStockphoto

Test ProgramThe purpose of the test program was to verify the application efficiency of a paintsystem composed of an organic zinc epoxy, intermediate epoxy, and epoxy acrylictopcoat, and compare this system to the one traditionally used by the company.According to the product data sheets, the organic zinc primer system has areduced application time (with consequent reduction in operational costs) for thesame quality and performance offered by the current system.

Paint Systems ComparedFor the coating application efficiency tests, the paint systems shown in Table 1were compared. System 3 is traditionally used by the company for newbuilding,and System 4 is used in maintenance activities. Systems 1 and 2 are under evalu-ation for newbuilding, and System 5 is an alternative maintenance system.

Description of Work All the systems were applied on one-meter-long beams (HEB 500 steel joists).Surfaces were prepared by blasting with non-siliceous material to White Metal,degree Sa3 (in conformity with ISO 8501), and with a profile of 70-85 microns.

Both Systems 4 and 5 were applied on the same joist and divided in two identicalhalves for the gloss comparative evaluation of the two different topcoats.

In addition, three carbon steel plates (150x70x15cm) were arranged side by side, for every system,and given the same surface preparation and coatingapplication method for each system.

The products used in System 3 (A2) were alreadyavailable in the fabrication yard. However, theycame from different suppliers, so the data obtainedisn’t as truly comparable as if the products hadcome from the same paint manufacturer. Never-theless, this system has been used for many years,and the performance obtained is well known.

Preparation of SurfacesThe surface preparation of all joists and plates wasexecuted in accordance with the Company PaintFunctional Specification, which calls for blasting toSa3 with a medium profile. The plates were washedwith high-pressure water before blasting. The joists,unlike the plates, didn’t require a pre-treatment andthus were directly blast cleaned.

Blasting operations were executed in the blastingcabinet in accordance with ISO 8502-4. The abrasive material used was SteelGrit 40.7, in accordance with ASTM D4285. The blotter test was used toensure that the air used in the blasting and painting operation was free of oiland/or water.

The surface of all samples was therefore cleaned to White Metal,corresponding to ISO 8501, degree Sa3. Any metal flaws exposed after blastcleaning were eliminated through disk grinding.

The determination of roughness (or blast profile) was carried out in accor-dance with ASTM D4417, Method C (X-Coarse tape).

2

Table 1: Systems Compared

System 1 C/a Organic zinc epoxy—75 microns

Intermediate epoxy—200 microns

Epoxy acrylic topcoat—75 microns

System 2 C/p Organic zinc epoxy—75 microns

Intermediate epoxy—200 microns

Polyurethane topcoat —75 microns

System 3 A2 Inorganic zinc—75 microns

Epoxy polyamide—25 microns

Epoxy polyamide—125 microns

Fluorocarbon topcoat—30 microns

System 4 C/Ma Intermediate epoxy—200 microns

Epoxy acrylic topcoat—75 microns

System 5 C/Mp Intermediate epoxy—200 microns

Polyurethane topcoat—75 microns

Table 2: Environmental Conditions during Blasting and Coating

Date—Hour Blast/Paint Temp. Air Temp. Relative Dew Temp.

Cabinet (C) Humid Humidity Point Metal

Bulb (C) (%) (C) (C)

09/14—10:30 Blasting 27 20.5 63 19.5 31

09/14—11:45 Paint 28 21 64 17.8 30

09/14—12:01 Paint 28 21 64 17.8 30

09/14—17:00 Paint 27 22 63 19.5 28.5

09/15—11:20 Paint 27.5 24 72 22.7 28.8

09/15—14:20 Paint 26.5 26.5 72 21.5 28.5

09/15—14:50 Paint 28 25 78 23.9 29.5

09/15—15:15 Paint 28 23.5 72 23.2 28

09/16—17:00 Paint 27 20.5 63 19.5 31

09/17—09:45 Paint 22 18.5 73 16.2 30

09/18—11:30 Paint 27.5 21 57 18 34

Table 3: Average Spot Dry Film Thickness Reading

Sample 1 2 3 4 5

C/a C/p A2 C/Ma C/Mp

Total DFT 350 380 290 310 315

(Microns)

Environmental ConditionsDuring all work operations, environmental data was recorded with a sling psychrometer and a con-tact magnetic analog thermometer. Environmental recordings were measured inside the blast-ing/painting cabinet.

Paint ApplicationAll the systems were applied by airless spray using two pumps produced by two different compa-nies, although the pumps have the same operational characteristics.

The wet film thickness was measured during all application phases using a wet film comb. The dryfilm thickness during all the phases of systems application was carried out according to SSPC-PA 2,“Measurement of Dry Film Thickness with Magnetic Gauges.” The instrument was calibrated by es-tablishing the “zero” through four spot readings on the blast-cleaned substrate (random area by sam-ple joists) and through measurements with plastic shims certified by the instrument manufacturer,75 microns thick for primers, and 400 microns for topcoat systems.

Adhesion Determination Adhesion tests were carried out in con-formity with ASTM D3359 (cut), D4541(pull-off) and ISO 4624 (pull-off) standards,as required by the Company FunctionalSpecification. Tests according to the cutmethod were carried out using a knife andadhesive tape where the painting thicknessexceeded 125 microns on all the systems,but only the pull-off results are given inthis article. Tests with the pull-off methodwere carried out on the three full paintsystems by applying dollies on the surfacewith a two-pack composite epoxy,and were measured with a mechanicalinstrument.

Analysis of Completion Time of Finished SystemsThe application of all tested systems was timed in orderto compare theoretical times specified in the product datasheets and real times obtained in the climatic conditionspresent.

Results and DiscussionAfter blast cleaning, the average roughness obtained wasas follows.• Joist 1: 80 microns • Joist 2: 75 microns • Joist 3: 72 microns • Joist 4: 76 microns

The environmental conditions during the variousstages of blasting and painting for the test samples areshown in Table 2.

3

Table 4: Adhesion Values and Fracture Modes

Sample Average Adhesion Visual Observation Average Adhesion Visual Observation

Value (MPa) by (Detachment) Value (MPa) by (Detachment)

Mechanical Instr. (%) Pneumatic Instr. (%)

System 1 5.5 80 topcoat 12.5 100 topcoat

C/a 20 intermediate 0 intermediate

System 2 6 80 topcoat 12.5 70 topcoat

C/p 20 intermediate 10 intermediate

System 3 7 90 topcoat 16 90 topcoat

A2 10 intermediate 10 intermediate


C/Ma


C/Mp

Table 5: Total Drying Times

Paint System 1 Paint System 2 Paint System 3 Completion times Hours hours hours

Completed (yard) 27 27 96

Completed (product data sheet) 10 10 52

Movable (yard) 29 36 100

Movable (product data sheet) 12 18 54

“The [total drying] times...demonstrate amarked difference between the theoretical and the practical....”

As can be seen, the environmental conditions inside the blasting and painting cabinet were fairlyuniform and always optimum for the work. The metal temperature was always at least 3 degrees Cabove the dew point. However, the climatic conditions outside the cabinet, because of several storms,caused a slowdown of drying time and coating of the inorganic zinc and intermediate epoxypolyamide.

The wet film thicknesses were in the range of 280–400 microns, and the average spot dry filmthickness reading is given for each system in Table 3.

The adhesion values and mode of fracture for the different systems are given in Table 4.For the total drying times, see Table 5.The times shown in the Table 5 demonstrate a marked difference between the theoretical and the

practical, and, importantly, the test systems show a large reduction with regard to the system con-ventionally used (A2). Such differences are possible, due particularly to the application of organicepoxy zinc, which, compared to the inorganic zinc, dries in about 3 hours. This primer offers quickovercoating and does not require an epoxy polyamide tie-coat application for pore saturation, and,in the final analysis, it is unrelated to relative humidity and can be applied at values below 50%.

Conclusions The tests in yard have emphasized the following. 1. Both paint systems 1 and 2 have shown total application times lower than those obtained by con-ventional system No. 3 2. The polyurethane topcoat system is liked better for its higher gloss, consistency, low volatile or-ganic compound (VOC) content and high-solids content. This topcoat was already included in thesystem of paint provided for the area above the splash-zone and is an integral part of the last reviewof the Company Functional Paint Specification! (The fluoropolymer topcoat was removed from thepaint specification because of a very high cost with not much difference in performance, and apolyurethane topcoat was substituted.)3. Both systems 4 and 5 applied directly on the bare metal, without using primer, confirm good re-sults in terms of adhesion, and so they are considered efficacious if used in maintenance. Thepolyurethane topcoat in system 5 is already used by the company.4. Because of its lower dependence on climatic conditions, the organic zinc epoxy application is eas-ier than the inorganic zinc application. However, attention has to be paid, particularly, to the filmthickness and drying time. In addition, the absence of tie-coat application (a coat of paint betweenprimer and intermediate) is more sensitive to mistakes in the formation of the zinc film.

About the AuthorMassimo Cornago, now a private consultant, most recently worked for ENI Exploration & Produc-tion, SpA, Italy. He has approximately 30 years of experience in the oil and gas industry, with muchof his work focusing on coatings and corrosion engineering. He has been involved in research anddevelopment, corrosion studies, risk evaluation, chemical treatments, and active as well as passivecorrosion protection. Cornago also has experience with problem solving and failure analyses, and hehas performed inspections and provided assistance on jobs in the field. In addition, his expertiseincludes preparing analyses of technical specifications for paint and coatings work on newconstruction and on maintenance projects; qualifying coating application facilities, paint systems andcoatings, paint manufacturers, and applicators; and management of paint and coating maintenancework in a variety of settings, including FPSO and offshore platforms. He is a NACE-certified coat-ing inspector and has taught for NACE, AGIP, and the Associazone Italiana di Metallurgia (AIM).He is active in ISO and other industry organizations and has presented papers, chaired conferencesessions, and published articles around the world. He is a recipient of the 2012 award, JPCL’s TopThinkers: The Clive Hare Honors.

4

JPCL

5

Altex Coatings Ltd.CarboguardEpoxy 100% Solids (1 or 2 Coats)

Amercoat CanadaAmercoatEpoxy Novolac (1 or 2 Coats)

BASF Corporation—Building SystemsA-P-EEpoxy/Epoxy 100% solids

Belzona, Inc.Belzona 5831Epoxy 100% Solids (1 or 2 Coats)

Carboline CompanyCarboguardEpoxy 100% Solids (1 or 2 Coats)

ChemCo SystemsCCS Marine CoatingOrganic Zinc/Epoxy 100% solids

Chemtreat India Ltd.ChemtuffEpoxy Flake Filled/Epoxy Flake Filled

Cote-L Industries Inc.Durabak/Durabak SmoothUrethane/Urethane

Denso North AmericaSeaShield/DensoOther

Eoncoat LLCEonCoat 0 VOCOther

ErgonArmorNovocoatEpoxy Novolac (1 or 2 Coats)

Euclid Chemical CompanyAquasealEpoxy 100% Solids (1 or 2 Coats)

FujiFilm Smart Surfaces, LLCDuplex Silicone Fouling ReleaseOther

Gemite Products Inc.Fibre-PrimeOther

Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)

Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy/Epoxy

Hempel (USA) Inc.45751-3/45751-3/45751-3Epoxy/Epoxy/Epoxy

Heresite Protective Coatings, LLCCSE-6200/UC-5500Epoxy (1-2 Coats)/Urethane

HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)

Hydrex Underwater TechnologyEcospeedVinyl Ester/Vinyl Ester/Vinyl Ester

Instacoat Premium ProductsInstacoatOther

International Paint LLCInternationalEpoxy/Epoxy/Epoxy

Jotun Paints Inc.JotamasticEpoxy/Epoxy 100% Solids

Kaufman Products, Inc.K Pro UC CoatingEpoxy 100% Solids (1 or 2 Coats)

KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester/Vinyl Ester/Vinyl Ester

NSP Specialty ProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)

Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)

PPC Coatings (MTR)PPC CoatingsOther

PPG Protective & Marine CoatingsAmercoatEpoxy Novolac (1 or 2 Coats)

Rhino Linings CorporationRhino TuffGripUrethane Elastomeric (1 Coat)

Sauereisen, Inc.SauereisenEpoxy 100% Solids (1 or 2 Coats)

Seal For Life IndustriesStopaq WrappingbandTape Wraps

Sherwin-WilliamsEuronavy ES301Epoxy/Epoxy 100% Solids

Simpson Strong-Tie/Fox IndustriesFox FX-70 Field Formed SystemOther

Specialty Products, Inc. (SPI)Polyshield HT-SL, SS-100, HT-100FPolyurea Pure (1, 2, or 3 Coats)

Subsea Industries NVEcospeedVinyl Ester/Vinyl Ester/Vinyl Ester

Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic

Listings are alphabetized by company name.

Jacket Immersed AreaSteel

Coating System Guide for Offshore Platforms

SPONSORED BY

6

Tesla NanoCoatings Ltd.TeslanZinc-Rich, Organic

ThermionThermionThermal Spray

Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)

TMS Metalizing Systems, Ltd.TMS MetalizingThermal Spray

U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids

Wasser CorporationWasserMCU Zinc Rich/MCU/MCU

Wilko Paint, Inc.WilkoPolyester/Polyester/Polyester

Jacket Splash ZoneSteel

AcryliCon Flooring SolutionsAcryliCon IndustryOther

Altex Coatings Ltd.CarboguardEpoxy/Epoxy Flake Filled (2 Coats)

Amercoat CanadaAmercoatEpoxy 100% Solids (1 or 2 Coats)

BASF Corporation—Building SystemsA-P-EEpoxy/Epoxy 100% Solids


Blome International/Part of the Hempel GroupBlome EC-86Epoxy/Epoxy/Epoxy

Canusa-CPSWrapid BondTape Wraps

Carboline CompanyCarboguardEpoxy Flake Filled/Epoxy Flake Filled

ChemCo SystemsCCS Marine Coating HBEpoxy 100% Solids (1 or 2 Coats)

Chemtreat India Ltd.ChemtuffEpoxy Flake Filled/Epoxy Flake Filled



Enecon CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)


ErgonArmorNovocoatEpoxy/Epoxy 100% Solids




Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy 100% Solids

Hempel (USA) Inc.45751-3/45751-3/45751-3Epoxy/Epoxy/Epoxy

Heresite Protective Coatings, LLCCSE-6200Epoxy/Epoxy/Epoxy



Industrial Nanotech Inc.Nansulate PTThermal Spray



ITW PolySpec/Futura CoatingsPolySpec ThiokolEpoxy/Epoxy 100% Solids

Jotun Paints Inc.MarathonEpoxy/Epoxy Flake Filled (2 Coats)

SPONSORED BYOffshore Platforms

Cli

ck o

ur

Re

ad

er

e-C

ard

at

pa

ints

qu

are

.co

m/r

ic

7


KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy Flake Filled (2 Coats)

NSP Specialty ProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)



PPG Protective & Marine CoatingsAmercoatEpoxy 100% Solids (1 or 2 Coats)

Premier Coating Systems Inc.PCS-#1200TAOther


Rust Bullet, LLCRust Bullet StandardOther



Sherwin-WilliamsSher-Glass FFEpoxy Flake Filled/Epoxy Flake Filled


Specialty Products, Inc. (SPI)Polyshield HT-SL, Hi-E, HT-100FPolyurea Pure (1, 2, or 3 Coats)


Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate



Thin Film Technology, Inc.Bio-Dur 560Epoxy 100% Solids (1 or 2 Coats)

TIB Chemicals AGProtegolUrethane Elastomeric (1 Coat)


U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids


Wilko Paint, Inc.WilkoshieldPolyester/Polyester/Polyester

Jacket Atmospheric ZoneSteel

Altex Coatings Ltd.Carbozinc, Carboguard, CarbothaneOrganic Zinc/Epoxy/Urethane

Amercoat CanadaAmercoatInorganic Zinc/Epoxy/Urethane


Canusa-CPSWrapid BondTape Wraps

Carboline CompanyCarbozincInorganic Zinc/Epoxy/Urethane

Chemtreat India Ltd.ChemtuffEpoxy 100% Solids (1 or 2 Coats)

CorrosealCorroseal Rust Converter PrimerOther





ErgonArmorNovocoatEpoxy (1-2 Coats)/Acrylic (1-2 Coats)


FSC Coatings Inc.Rustop/SP-X Silicone Poly PlusEpoxy (1-2 Coats)/Urethane




Hempel (USA) Inc.45751-3/45751-3/55000Epoxy/Epoxy/Siloxane

Heresite Protective Coatings, LLCVR-500Other





Jotun Paints Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane


KCC Corrosion Control Co., Ltd.Techni-Plus EP 14Epoxy/Epoxy 100% Solids

NSP SpecialtyProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)



PPG Protective & Marine CoatingsAmercoatInorganic Zinc/Epoxy/Urethane



8

Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic



Sherwin-WilliamsEuronavy ES 301Epoxy/Epoxy 100% Solids


Specialty Products, Inc. (SPI)Polyshield HT-SL, Hi-E, HT-100FPolyurea Pure (1, 2, or 3 Coats)





Thin Film Technology, Inc.Bio-Dur 560/568Epoxy 100% Solids (1 or 2 Coats)


U.S. Coatings, LLCZincGard/GripLineOrganic Zinc/Epoxy 100% Solids

Wasser CorporationWasserMCU/MCU/MCU

Wilko Paint, Inc.WilkoshieldPolyester/Polyester/Polyester

Topsides Severe Marine Exposure

Steel

AcryliCon Flooring SolutionsAcryliCon IndustryOther

Altex Coatings Ltd.Carbozinc, Carboguard, CarbothaneOrganic Zinc/Epoxy/Urethane

Amercoat CanadaAmercoatOrganic Zinc/Siloxane

Armor Plate, Inc.Armor Plate 901 ABEpoxy/Epoxy 100% Solids

Blair Rubber CompanyMarseal 4000Sheet Lining, Thermoplastic

Carboline CompanyCarbothaneOrganic Zinc/Epoxy/Urethane

Chemtreat India Ltd.ChemtuffEpoxy/Epoxy Novolac (2 Coats)

Coatings For Industry, Inc.UrethabondMCU Zinc Rich/Urethane/Urethane

Cote-L Industries Inc.Durabak 18/Durabak 18 SmoothUrethane/Urethane

Denso North AmericaDensoPolyester/Polyester/Polyester



ErgonArmorNovocoatEpoxy (1-2 Coats)/Urethane


FSC Coatings Inc.Rustop/SP-X Silicone Poly PlusEpoxy (1-2 Coats)/Urethane

Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)



Hempel (USA) Inc.45751-3/45751-3/55000Epoxy/Epoxy/Siloxane

Heresite Protective Coatings, LLCCSE-6200/UC-5500Epoxy (1-2 Coats)/Urethane





International Paint LLCInternationalInorganic Zinc/Epoxy/Siloxane

ITW American Safety TechnologyAS-250Epoxy/Epoxy/Epoxy

Jotun Paints Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane


KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane

MascoatMM-DTMAlkyd/Acrylic/Acrylic

NSP SpecialtyProductsNSP-120 HPEC High BuildEpoxy 100% Solids (1 or 2 Coats)



PPG Protective & Marine CoatingsAmercoatOrganic Zinc/Siloxane


9

Premier Coating Systems Inc.PCS-#1111/PCS-#4300Epoxy (1-2 Coats)/Fluorourethane

Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)

Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic



Sherwin-WilliamsEuronavy ES 301/Acrolon 218 HSEpoxy (1-2 Coats)/Urethane

Simpson Strong-Tie/Fox IndustriesFox FX-70-9 Hydro Ester CoatingEpoxy 100% Solids (1 or 2 Coats)

Specialty Products, Inc. (SPI)Polyshield HT-Slow, AMP 100, Hard Cap 100Polyurea Pure (1, 2, or 3 Coats)

SpeedCove Precast Cove Base SystemsSpeedCove Precast Cove Base SystemsOther





Thin Film Technology, Inc.Bio-Gard 258/561Epoxy (1-2 Coats)/Acrylic (1-2 Coats)


U.S. Coatings, LLCZincGard/EpoxyGrip/UreGripInorganic Zinc/Epoxy/Urethane


Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane

ZRC WorldwideZRC Zero-VOC Galvanizing CompoundZinc-Rich, Inorganic


Click our Reader e-Card at paintsquare.com/ric

10

AAbatron, Inc.5501-95th Ave.Kenosha, WI 53144Phone: 800-445-1754Contact: Marsha [email protected]

AcryliCon Flooring Solutions2905 Jordan Crt., Ste. B, #301Alpharetta, GA 30004Phone: 888-736-7550Contact: Jason [email protected]

Acrymax Technologies, Inc.221 Brooke St.Media, PA 19063Phone: 800-553-0523Contact: Eric [email protected]

Advanced Chemical Technologies, Inc.100 W. Wilshire Blvd., Ste. C-1Oklahoma City, OK 73116Phone: 800-535-0433Contact: Kevin [email protected]

Advanced Polymer Coatings, Ltd.951 Jaycox Rd.Avon, OH 44011Phone: 800-334-7193Contact: Jim [email protected]

Alistagen CorporationTen Park Ave.New York, NY 10016Phone: 212-317-0100Contact: Alis [email protected]

Altex Coatings Ltd.PO Box 142Tauranga, 3140 New ZealandPhone: 64 7 541 2327Contact: Ricky [email protected]

Amercoat Canada1174 South Service Rd. WOakville, ON L6L 5T7 CanadaPhone: 905-847-1500Contact: Daniel [email protected]

Andek Corporation850 Glen Ave., PO Box 392Moorestown, NJ 08057Phone: 800-800-2844Contact: Neil [email protected]

Arizona Polymer Flooring Inc.7731 N 68th Ave.Glendale, AZ 85303Phone: 888-855-3455Contact: Daniel [email protected] our display ad, p. 60.

Arizona Specialty Coatings LLC21242 N. Black Canyon Hwy., Ste. APhoenix, AZ 85027Phone: 623-780-3336Contact: Pete [email protected]

Arkema Inc.900 First Ave., Bldg. 10King of Prussia, PA 19406Phone: 610-205-7898Contact: Vince [email protected]

Armor Plate, Inc.PO Box 5625Pasadena, TX 77508Phone: 337-540-7606Contact: Tommy [email protected]

Atlas Minerals & Chemicals, Inc.1227 Valley Rd., PO Box 38Mertztown, PA 19539Phone: 610-682-7171Contact: Scott [email protected]

Avilion Inc.3947 Lincoln Hwy.Downingtown, PA 19335Phone: 610-942-7388Contact: Michelle [email protected]

BBASF CorporationBuilding Systems889 Valley Park Dr.Shakopee, MN 55379Phone: 800-433-9517Contact: Customer [email protected]

Bechtel Industrial Coating Supply21424 SE 16th Pl.Sammamish, WA 98075Phone: 425-392-1876Contact: Robert [email protected]

Belzona, Inc.2000 NW 88th Crt.Miami, FL 33172Phone: 305-594-4994Contact: Kelli [email protected]

Blair Rubber Company5020 Panther Pkwy.Seville, OH 44273Phone: 888-276-1400Contact: Howard [email protected]

company profiles

11

Blome InternationalPart of the Hempel Group1450 Hoff Industrial Dr.O’Fallon, MO 63366Phone: 636-379-9119Contact: Laura [email protected]

Bowers Industrial3645 W. 1987 SouthSalt Lake City, UT 84104Phone: 800-892-5224Contact: [email protected]

Bridgeport Chemical291 West McAllenSikeston, MO 63801Phone: 573-472-9700Contact: Rob [email protected]

CCanusa-CPS25 Bethridge Rd.Toronto, ON M9W 1M7 CanadaPhone: 416-744-5798Contact: Bob [email protected]

Carboline Company2150 Schuetz Rd.St. Louis, MO 63146Phone: 314-644-1000Contact: Steve [email protected] our display ads, inside front cover and p. 136.

CCI Con-Tech of California, Inc.2211 Navy Dr.Stockton, CA 95206Phone: 209-941-8324Contact: Steven A. [email protected]

Ceilcote (International Paint LLC)6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267Contact: Sales Adminstrationpcmarketing.americas@akzonobel.cominternational-pc.com

Celufibre Industries Inc.14735–124 Ave.Edmonton, AB T5L 3B2 CanadaPhone: 780-447-1255Contact: Kevin [email protected]

ChemCo Systems2800 Bay Rd.Redwood City, CA 94063Phone: 800-757-6773Contact: John [email protected]

ChemMasters, Inc.300 Edwards St.Madison, OH 44057Phone: 800-486-7866Contact: John [email protected]

Chemtreat India Ltd.408 Srishti PlazaMumbai, 400070 IndiaPhone: 91 9820024504Contact: Mukul Guptachemtreatindia.com

Chugoku Marine Paints Singapore Pte. Ltd.No. 22 Tuas St.Singapore, 638459 SingaporePhone: 65 [email protected]

CIM Industries23 Elm St.Peterborough, NH 03458Phone: 603-924-9481Contact: Becky [email protected]

Coatings For Industry, Inc.319 Township Line Rd.Souderton, PA 18964Phone: 215-723-0919Contact: Kevin Klotzcoatingsforindustry.comSee our display ad, p. 62.

Concrete Solutions™Products by Rhino Linings9151 Rehco Rd.San Diego, CA 92121Phone: 619-410-6020Contact: Bart [email protected]

ConShield Technologies541 10th St., #233Atlanta, GA 30318Phone: 877-543-2094Contact: Joe [email protected]

Copolymer Protection SystemsPO Box 2860Danville, CA 94526Phone: 925-551-7796Contact: Gerald [email protected]

Copps Industries, Inc.10600 N. Industrial Dr.Mequon, WI 53092Phone: 800-672-2622Contact: Jeff [email protected]

Corchem®

1227 South Murphy St.Odessa, TX 79766Phone: 432-332-1335Contact: Daryl [email protected]

Corotech High Performance Coatings101 Paragon Dr.Montvale, NJ 07645Phone: 201-949-6216Contact: Jeffrey T. [email protected]

Corroseal6107 N Marine Dr.Portland, OR 97203Phone: 800-237-1573Contact: Sue [email protected]

Corro-Shield International, Inc.7059 Barry St.Rosemont, IL 60018Phone: 847-298-7770Contact: Hugh [email protected]

Cortec Corporation4119 White Bear Pkwy.St. Paul, MN 55110Phone: 651-429-1100Contact: Cliff [email protected]

Cote-L Industries Inc.1542 Jefferson St.Teaneck, NJ 07666Phone: 201-836-0733Contact: Cy [email protected]

Creative Polymers Inc.9200 Latty Ave.Saint Louis, MO 63042Phone: 314-524-0191Contact: Rod [email protected]

Crossfield Products Corp.3000 E. Harcourt St.Rancho Dominguez, CA 90221Phone: 310-886-9100Contact: Jodi [email protected]

Company Profiles

12 Company Profiles

DDampney Co., Inc.85 Paris St.Everett, MA 02149Phone: 617-389-2805Contact: Dennis [email protected]

Denso North America9747 Whithorn Dr.Houston, TX 77095Phone: 281-821-3355Contact: Jesse [email protected]

Devoe High Performance Coatings (International Paint LLC)6001 Antoine Dr.Houston, TX 77091Phone: 888-338-6347Contact: Sales & Tech [email protected]

Diamond Vogel Paint Company1110 Albany Pl. SEOrange City, IA 51041Phone: 712-737-8880Contact: Perry [email protected]

Dow Chemical Company9008 Bldg.Midland, MI 48642Phone: 800-447-4369Contact: Barb Gustafsondow.com

Dow Corning CorporationPO Box 0994Midland, MI 48686Phone: 800-248-2481Contact: Customer [email protected]/coatings

Dudick, Inc.1818 Miller Pkwy.Streetsboro, OH 44241Phone: 330-562-1970Contact: Barb [email protected]

Dunn-Edwards4885 E. 52nd Pl.Los Angeles, CA 90058Contact: Customer Servicedunnedwards.com

Duraamen Engineered Products Inc.116 West 23rd St.New York, NY 10011Phone: 212-386-7609Contact: Victor [email protected]

EEllis Paint Company3150 E. Pico Blvd.Los Angeles, CA 90023Contact: Karen [email protected]

Enecon Corporation6 Platinum Crt.Medford, NY 11763Phone: 516-349-0022Contact: Mike [email protected]

Enviroline (International Paint LLC)6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267Contact: Sales Administrationpcmarketing.americas@akzonobel.cominternational-pc.com

Eoncoat LLC4000 Airport Dr. NWWilson, NC 27896Phone: 252-360-3110Contact: Tony [email protected]

Epmar Corp.13210 Barton Cl.Whittier, CA 90605Phone: 562-236-1170Contact: Michael Sorianoepmar.com

ErgonArmorPO Box 23028Jackson, MS 39225Phone: 877-982-7667Contact: Customer [email protected]

Euclid Chemical Company19218 Redwood Rd.Cleveland, OH 44110Phone: 800-321-7628Contact: Technical [email protected]

Evonik Industries299 Jefferson Rd.Parsippany, NJ 07054Phone: 973-929-8522Contact: Christopher [email protected]

Click o

ur R

ea

de

r e-C

ard

at p

ain

tsqu

are

.com

/ric

FFabick Protective Coatings4118 Robertson Rd.Madison, WI 53714Phone: 608-242-1100Contact: Brad [email protected]

Farwest Corrosion Control Company1480 W. Artesia Blvd.Gardena, CA 90248Phone: 310-532-9314Contact: Marnie [email protected]

Flame Control Coatings, LLC4120 Hyde Park Blvd.Niagara Falls, NY 14305Phone: 716-282-1399Contact: Jim [email protected]

Flame Seal Products, Inc.15200 West Dr.Houston, TX 77053Phone: 713-668-4291Contact: Terri [email protected]

Flexi-Liner Corp.3198 Factory Dr.Pomona, CA 91768Phone: 800-423-4909Contact: Kyle [email protected]

Florock, Crawford Labs, Inc.4165 S. Emerald Ave.Chicago, IL 60609Phone: 800-356-7625Contact: Customer [email protected]

FSC Coatings Inc.5360 Eastgate Mall Rd., Ste. FSan Diego, CA 92121Phone: 800-579-8459Contact: Steve [email protected]

FujiFilm Smart Surfaces, LLC40 Boroline Rd.Allendale, NJ 07401Phone: 877-770-7446Contact: Charles [email protected]

Fusion UV Systems910 Clopper Rd.Gaithersburg, MD 20878Phone: 301-527-2660Contact: Kevin [email protected]

GGelest, Inc.11 E. Steel Rd.Morrisville, PA 19067Phone: 215-547-1015Contact: Gabrielle [email protected]

Gemite Products Inc.1787 Drew Rd.Mississauga, ON L5S 1J5 CanadaPhone: 888-443-6483Contact: Igor [email protected]

Global EcoTechnologiesPO Box 2205Antioch, CA 94531Phone: 925-473-9250Contact: Scott [email protected]

Groco Specialty Coatings10818 C.F. Hawn Frwy.Dallas, TX 75217Phone: 972-286-7890Contact: Bob [email protected]

Gulf Coast Paint Mfg., Inc.30075 County Rd. 49Loxley, AL 36551Phone: 251-964-7911Contact: John R. [email protected]

Hhci chemtech, inc.310 S. Bellis St.Wausau, WI 54403Phone: 800-596-6282Contact: Cheryl [email protected]

Hempel (USA) Inc.600 Conroe Park North Dr.Conroe, TX 77303Phone: 936-523-6000Contact: Malcolm [email protected] our display ads, pp. 46 and 94.

Hempel DenmarkLundtoftevej 150DK-2800 Kgs. LyngbyPhone: 45 4593 [email protected] our display ads, pp.76 and 100.

Heresite Protective Coatings, LLC822 South 14th St.Manitowoc, WI 54220Phone: 920-684-6646Contact: Doug [email protected]

Highland International, Inc.465 Industrial Park Dr., PO Box 3564Boone, NC 28607Phone: 828-265-2513Contact: Salespbaxter@highland-international.comhighland-international.comSee our display ad, p. 53.

Hi-Temp Coatings TechnologyPO Box 2347Acton, MA 01720Phone: 978-635-1110Contact: Mike [email protected]

HJ3 Composite Technologies2440 West Majestic Park WayTucson, AZ 85705Phone: 520-322-0010Contact: John [email protected]

Huntsman Polyurethanes2190 Executive Hills Blvd.Auburn Hills, MI 48326Phone: 248-322-7431Contact: Kevin A. [email protected]/pu/ace

Hydrex Underwater Technology604 Druid Rd. E.Clearwater, FL 33756Phone: 727-443-3900Contact: George [email protected]

IInduron Coatings, Inc.3333 R. Arrington Jr. Blvd. N.Birmingham, AL 35234Phone: 800-324-9584Contact: Jeff [email protected]

Industrial Nanotech Inc.1925 Trade Center Way, Ste. 1Naples, FL 34109Phone: 800-767-3998Contact: Francesca [email protected]

Instacoat Premium Products44648 Mound Rd., Ste. 104Sterling Heights, MI 48317Phone: 877-552-6724Contact: Anthony [email protected]

Insulating Coatings Corporation27 Link Dr., Ste. DBinghamton, NY 13904Phone: 800-223-8494Contact: Rick [email protected]

13 Company Profiles

14 Company Profiles

International Coatings Inc.2925 Lucy Ln.Franklin Park, IL 60131Phone: 800-624-8919Contact: Angel [email protected]

International Paint LLC6001 Antoine Dr.Houston, TX 77091Phone: 800-589-1267Contact: Sales Adminstrationpcmarketing.americas@akzonobel.cominternational-pc.comSee our display ad, p. 30.

Isolatek International41 Furnace St.Stanhope, NJ 07874Phone: 800-631-9600Contact: Sean [email protected]

ITW American Safety Technology6614 Gant Rd.Houston, TX 77066Phone: 281-397-0033Contact: Alan [email protected]

ITW Devcon30 Endicott St.Danvers, MA 01923Phone: 800-933-8266Contact: Jessica [email protected]

ITW PolySpec/Futura Coatings6614 Gant Rd.Houston, TX 77066Phone: 281-397-0033Contact: Alan [email protected] our display ad, p. 51.

JJotun Paints Inc.9203 Hwy. 23Belle Chasse, LA 70037Phone: 504-394-3538Contact: Salesjotun.com/usSee our display ad, p. 68.

Jotun Powder CoatingsPO Box 2130, Stubberod3255 Larvik, 3255 NorwayPhone: 47 33 16 40 00Contact: Fredrik [email protected]

KKaufman Products, Inc.3811 Curtis Ave.Baltimore, MD 21226Phone: 800-637-6372Contact: Alex [email protected]

KCC Corrosion Control Co., Ltd.4018 Trey Dr.Houston, TX 77084Phone: 281-550-1199Contact: Owen T. [email protected]

Kema Coatings LimitedUnit 904–60 Wyndham St. SGuelph, ON N1E 7H7 CanadaPhone: 519-826-9374Contact: Mark [email protected]

Kemper System America, Inc.1 Reuten Dr.Closter, NJ 07624Phone: 800-541-5455Contact: Diana [email protected]

Key Resin Company4050 Clough Woods Dr.Batavia, OH 45103Phone: 888-943-4532Contact: Eric [email protected]

Kryton International Inc.1645 East Kent Ave.Vancouver, BC V5P 2S8 CanadaPhone: 604-324-8280Contact: Isabella [email protected]

LLonza Microbial Control5660 New Northside Dr., Ste. 1100Atlanta, GA 30328Phone: 800-523-7391Contact: Customer Service [email protected]

Click o

ur R

ea

de

r e-C

ard

at p

ain

tsqu

are

.com

/ric

15

MMad Dog Primer309 Plum St. NNorthfield, MN 55057Phone: 507-645-7431Contact: Steve [email protected]

Madison Chemical Industries490 McGeachie Dr.Milton, ON L9T 3Y5 CanadaPhone: 905-878-8863Contact: Kim [email protected]

Mascoat4310 Campbell Rd.Houston, TX 77041Phone: 713-465-0304Contact: Chad [email protected] our display ad, p. 49.

Micor Company, Inc.3232 N. 31st St.Milwaukee, WI 53216Phone: 800-284-4308Contact: Bill [email protected]

NNational Polymers Inc.9 Guttman Ave.Charleroi, PA 15022Phone: 724-483-9300Contact: Erica [email protected]

Nationwide Chemical Coating Mfrs., Inc.7106 24th Crt. EastSarasota, FL 34243Phone: 800-423-7264Contact: [email protected]

Navcor4150 112th Terr. N., Bldg. AClearwater, FL 33762Phone: 727-299-9090Contact: Steve [email protected]

NCFI PolyurethanesPO Box 1528Mt. Airy, NC 27030Phone: 800-246-8229Contact: Customer [email protected]

NIC Industries7050 6th St.White City, OR 97503Phone: 541-826-1922Contact: Jeff [email protected]

NoFire Technologies, Inc.5 James St.South Hackensack, NJ 07606Phone: 201-818-1616Contact: Al [email protected]

Northern Industries Inc.429 Tiogue Ave.Coventry, RI 02816Phone: 401-821-2121Contact: Rick [email protected]

Nox-Crete Products Group1444 S. 20th St.Omaha, NE 68108Phone: 402-341-2080Contact: Customer [email protected]

NSP Specialty ProductsPO Box 4690Pinehurst, NC 28374Phone: 910-235-0468Contact: Larry [email protected]

Nukote ArabiaPrince Thamer St., Cross 25Al Khobar, 31952 Saudi ArabiaPhone: 966 3 8677004Contact: Abdul [email protected]

Nutech Paint LLC104 North Smith St., Units 103, 104Corona, CA 92880Phone: 714-557-4180Contact: Robert [email protected]

PPacific Polymers (A Division of ITW)12271 Monarch St.Garden Grove, CA 92841Phone: 714-793-1988Contact: Michael [email protected]

Para Paints11 Kenview Blvd.Brampton, ON L6T 5G5 CanadaPhone: 905-792-0940Contact: Garry [email protected]

The Platt Brothers & CompanyPO Box 1030Waterbury, CT 06721Phone: 203-753-4194Contact: David Berardinelliplattbros.com

Polibrid Coatings, Inc.6700 F.M. 802Brownsville, TX 78526Phone: 956-831-7818Contact: Klaus D. [email protected] our display ad, p. 48.

Polycoat Products14722 Spring Ave.Santa Fe Springs, CA 90670Phone: 562-802-8834Contact: Joe [email protected]

Polycorp Ltd.33 York St.Elora, ON N0B 1S0 CanadaPhone: 519-846-2075Contact: Dennis [email protected]

Polymax/Milamar Coatings L.L.C.311 NW 122nd St., Ste. 100Oklahoma City, OK 73114Phone: 405-755-8454Contact: Joanne [email protected]

PPC Coatings (MTR)2 Pixie Rd.Wilmington, DE 19810Phone: 877-588-2227Contact: Cliff [email protected]

PPG Protective & Marine CoatingsOne PPG Pl.Pittsburgh, PA 15272Phone: 888-977-4762Contact: Steve [email protected] our display ad, p. 112.

Premier Coating Systems Inc.606 N. Lane Ave., #6Jacksonville, FL 32254Phone: 904-403-6113Contact: Ron [email protected]

Prime Resins2291 Plunkett Rd.Conyers, GA 30012Phone: 800-321-7212Contact: Adam [email protected]

Company Profiles

Company Profiles

Protective Floorings and Linings a Division of Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114Phone: 405-755-8454Contact: Joanne [email protected]

Protecto Wrap Company1955 Cherokee St.Denver, CO 80223Phone: 800-759-9727Contact: Customer [email protected]

Protek Paint Ltd.335 Horner Ave.Toronto, ON M8W 1Z6 CanadaPhone: 800-773-5233Contact: Barry [email protected]

QQuest Construction Products (HydroStop/United Coatings)1465 Pipefitter St.N Charleston, SC 29405Phone: 800-739-5566Contact: Customer [email protected]

RRaven Lining Systems13105 East 61st St., Ste. ABroken Arrow, OK 74012Phone: 800-324-2810Contact: Jim [email protected]

Rema Tip Top/North America Inc.1500 Industrial Blvd.Madison, GA 30650Phone: 440-781-6226Contact: Larry [email protected] our display ad, p. 57.

Republic Powdered Metals, Inc.2628 Pearl Rd.Medina, OH 44256Phone: 800-551-7081Contact: Paula [email protected]

Rhino Linings Corporation9151 Rehco Rd.San Diego, CA 92121Phone: 800-422-2603Contact: John Henningsenrhinomarketing@rhinolinings.comrhinoliningsindustrial.com

Rodda Paint Co./Cloverdale Paint6107 N. Marine Dr.Portland, OR 97203Phone: 503-572-8201Contact: Tom [email protected]

RoofMart International Inc.2735 Rain Rd., PO Box 502Chapman, KS 67431Phone: 800-345-1439Contact: Customer [email protected]

Roval USA Corp.12270 NW Luoto Ln.Carlton, OR 97111Phone: 971-237-0958Contact: Aldo [email protected]

Rust Bullet, LLC300 Brinkby Ave., Ste. 200Reno, NV 89509Phone: 775-829-5606Contact: Kathline A. [email protected]

SSafe Encasement Systems1795 N. Snow Canyon Pkwy., Unit 63St. George, UT 84770Phone: 888-277-8834Contact: John [email protected]

Sauereisen, Inc.160 Gamma Dr.Pittsburgh, PA 15238Phone: 412-963-0303Contact: Lake [email protected]

Seacoat Technology11215 Jones Rd. W., Ste. HHouston, TX 77065Phone: 832-237-4400Contact: John [email protected]

Seal For Life Industries,Part of Berry Plastics Engineered Materials DivisionGasselterstraat 20Stadskanaal, 9503JB NetherlandsPhone: 31 599696170Contact: J.F. [email protected] our display ads, pp. 82 and 103.

Click o

ur R

ea

de

r e-C

ard

at p

ain

tsqu

are

.com

/ric16

17

Shalimar Paints LimitedOberoi Garden Estate, C Wing, 5th Fl.Mumbai, 400 072 IndiaPhone: 91 22 2857 7591Contact: P. Hari [email protected]

ShawCor CSI Services1607–10 St.Nisku, AB T9E 0A7 CanadaPhone: 403-218-8262Contact: Sam [email protected]

Sherwin-Williams101 Prospect Ave. NWCleveland, OH 44115Phone: 800-524-5979Contact: Customer [email protected]/protectiveSee our display ads, pp. 34 and 144.

Simpson Strong-Tie/Fox Industries3100 Falls Cliff Rd.Baltimore, MD 21211Phone: 410-243-8856Contact: Edye Fox [email protected]

Specialty Products, Inc. (SPI)2410 104th St., Crt. S, Ste. DLakewood, WA 98499Phone: 253-588-7101Contact: Cliff [email protected]

SpectraShield Liner Systems4527 Sunbeam Rd.Jacksonville, FL 32257Phone: 904-419-4889Contact: Bob [email protected]

SpeedCove Precast Cove Base Systems5781 Pleasant Valley Rd.El Dorado, CA 95623Phone: 530-344-9000Contact: Doug [email protected]

Stirling Lloyd Group Plc.Union Bank, King St.Knutsford, Cheshire, WA16 6EF UKPhone: 44 1565 633111Contact: Dave [email protected]

Sub-One Technology4464 Willow Rd., Bldg. 103Pleasanton, CA 94588Phone: 925-924-1020Contact: Dore [email protected]

Subsea Industries NVHaven 29–Noorderlaan 9Antwerp, 2030 BelgiumPhone: 32 3 213 53 18Contact: Manuel [email protected]

Sulzer Metco1101 Prospect Ave.Westbury, NY 11590Phone: 800-638-2699Contact: Customer [email protected]

Company ProfilesC

lick ou

r Re

ad

er e

-Ca

rd a

t pa

intsq

ua

re.co

m/ric

18 Company Profiles

Sumter Coatings Inc.2410 Hwy. 15 SouthSumter, SC 29154Phone: 803-481-3400Contact: Jimmy [email protected]

Superior Products10835 W 78th St.Shawnee, KS 66214Phone: 832-683-1123Contact: Hal [email protected]

TTermarust Technologies8150 Rue de L’IndustrieMontreal, QC H1J 1S7 CanadaPhone: 888-279-5497Contact: Craig [email protected] our display ad, p.39.

Tesla NanoCoatings Ltd.6200 Frank Ave. NW Massillon, OH 44720Phone: 330-880-5229Contact: Todd [email protected]

Textured Coatings of America2422 E. 15th St.Panama City, FL 32405Phone: 800-454-0340Contact: Regina [email protected]

ThermionPO Box 780Silverdale, WA 98383Phone: 877-884-3428Contact: Dean [email protected]

Thin Film Technology, Inc.5211 Brookglen Dr., Ste. AHouston, TX 77017Phone: 713-910-6200Contact: Jeff [email protected]

3L&T Inc.897 Independence Ave., Ste.1BMountain View, CA 94043Phone: 650-625-0177Contact: Linas [email protected]

3M Infrastructure Protection Division6801 River Pl. Blvd., 147-4N-01Austin, TX 78726Phone: 512-984-7801Contact: Michelle [email protected]/corrosion

TIB Chemicals AGMuelheimer Str. 16-22Mannheim, D-68219 GermanyPhone: 49 621 8901 812Contact: Rainer [email protected]

TMS Metalizing Systems, Ltd.7665 NW Eldorado Blvd.Bremerton, WA 98312Phone: 360-692-6656Contact: Dave [email protected]

Tnemec Company, Inc.6800 Corporate Dr.Kansas City, MO 64120Phone: 816-483-3400Contact: [email protected] our display ad, p. 140.

TPR2 Corporation36 Plains Rd.Essex, CT 06426Phone: 860-767-8772Contact: Brian [email protected]

UU.S. Coatings, LLCPO Box 220313St. Louis, MO 63122Phone: 314-205-1500Contact: Larry [email protected]

U.S. Industrial CoatingsPO Box 3200Framingham, MA 01705Phone: 508-980-1000Contact: Kenusindustrialcoatings.com

United Gilsonite Laboratories1396 Jefferson Ave.Dunmore, PA 18509Phone: 800-845-5227Contact: William [email protected]

VVersaFlex Incorporated686 S. Adams St.Kansas City, KS 66105Phone: 913-321-9000Contact: [email protected]

WW.R. Meadows300 Industrial Dr.Hampshire, IL 60140Phone: 800-342-5976Contact: W. R. Meadows

Walla Walla Environmental4 West Rees Ave.Walla Walla, WA 99362Phone: 509-522-0496Contact: Jamie [email protected]

Wasser Corporation4118 B Pl. NW, Ste. BAuburn, WA 98001Phone: 800-627-2968Contact: Kevin [email protected]

Watson Coatings, Inc.325 Paul Ave.St. Louis, MO 63135Phone: 314-521-2000Contact: Paul [email protected] our display ad, p. 36.

Wilko Paint, Inc.2727 OhioWichita, KS 67219Phone: 800-658-3799Contact: Don [email protected]

Willamette Valley Company1075 Arrowsmith St.Eugene, OR 97402Phone: 541-484-9621Contact: Gary [email protected]

zZRC Worldwide145 Enterprise Dr.Marshfield, MA 02050Phone: 800-831-3275Contact: Lorraine [email protected]

Documents

OFFSHORE PLATFORM COATINGS: SELECTING AND · PDF fileOFFSHORE PLATFORM COATINGS: SELECTING AND SOURCING ... Offshore Platform Coatings: Selecting and Sourcing ... formerly with ENI