Oem 2kw Wind Power Generator (Flyer) Current Stock of 2kw-2

8/20/2019 Oem 2kw Wind Power Generator (Flyer) Current Stock of 2kw-2

http://slidepdf.com/reader/full/oem-2kw-wind-power-generator-flyer-current-stock-of-2kw-2 1/6

5.4 82.9 150 202.8 252

269.3283.6

307.9

327.8

344.6

369.3

395.7

427.2

452.2

467.8

0

00

00

00

00

00

00

Watts

atts

RPM

OEM 2KW Wind Power

enerator

2KW Rated at: 20 MPH

Sweep Diameter 7.26 Feet

Including: Generator, Nacelle,

Extruded Aluminum Blades,Dynamic Braking & Dump Load

US$684.00 (FOB Ningbo China)

The OEM 2KW Wind Generator has beencarefully engineered and is of Heavy DutyIndu str ia l Constru ct ion . Made of heavy gaugesteel, Powder Coated, and designed to last for 10to 20 years. The Generator, Nacelle, Blades,

Dynamic Braking & Dump Load have a totalweight of 37 kilograms.

All parts are guaranteed fo r 3 y ears against

defects of mater ial or workm anship . Thewindmill can be used to charge a 24V batterybank, If you have an “annual wind speed " of 11

MPH at your site you can expect to generate5,840 Kilowatts per year. If you pay the utilitycompany $0.12 cents per KWH, the OEM 2KW

Wind Generator will pay for itself in One Year !



Packing Details for Generator & Major Components

100Amp @ 1600Volt

Bridge Rectifier

acking for Generator , & Nacellewith Styrofoam and double thick

Export Carton

Packing for Blades & Tail with

Styrofoam & double thick Export Carton

Aircraft quality Extruded Aluminum Blades

Yaw with double bearing & slip ring

assembly

O E M Wind Power Products …..

Change Photo

Is part of the Braking System



Dump Load660 Volts 2000 Watts

Fully AutomaticDynamic Braking

System limits the rotor speedOf the generator to 500 RPM

This is a heavy duty Dump LoadWhich Contains two large two ohmwire wound Resistors it has beenespecially Designed As a dump loafor Wind Generator Use.

The one millimeter steel case is graPowder coated for many years ofheavy use.

The wiring terminals have an extracover, to protect the terminals andto assure safe operation and use.


inc luded wi th

every Wind Generator

Dynamic Braking System, this uniwill Automatically monitor the rotor speed and keep it at or below 500RPM. When the wind is very strongand Dynamic Braking is activated.The power from the generator isdiverted to the Dump Load, which

slows the rotor until it is slightlybelow 500 RPM, this allows you toget the most watts possible fromthe wind.

inc luded wi th

every Wind Generator



OEM 1000 Watt Charge Controller

OEM 1000 Watt Grid-Tie Inverter


Sold Separately

US $326.00FOB Ningbo China

Sold Separately

US $298.00FOB Ningbo China

This OEM1000 Watt BatteryCharge Controller receive DCfrom the Wind Generator. Itsfunction is to prevent your batteriesfrom being “over charged or over

discharged” .

Display lights show the workingstatus of the controller itself.

The Grid-Tie Inverter has-beendesigned specially for use with OEMwindmills, it is connected on one ento the DC supply from the windmill the other end connects directly anywall outlet in your home. This will

cause your electric meter to run“backward” or slow if you are using

more electricity than the windmill isgenerating. No controller is needed

Output can be switched between110 VAC or 240 VAC.

The Grid-Tie Inverter, has the

function of “Anti-IslandingProtection”. If the grid is down, the

grid-tie inverter will switch off.



Raised by two men with a simpleChain Hoist

Hinged Base

Bolt-Together Angel Iron Lattice Tower Shipped disassembled on one pallet, with all hardwareShipping weight from 1 to 1.4 Metric Ton

The tower is available in 3 meter segments (the photo to the right) consistof 4 segments plus a top 3 meter section for attaching the Nacelle of theWindmill. The tower is available in 15 meters, 18 meters, 21 meters &

24 meter heights and is painted with primer paint.

The tower in the photo was assembled and raised by two men using onlyhand tools, and a small hand operated chain hoist.

These towers are made to order and are not stocked, manufacturingTakes from 4 to 6 weeks.

15 meters US $2000.00 FOB Ningbo China

18 meters US $2400.00 FOB Ningbo China21 meters US $2800.00 FOB Ningbo China24 meters US $3200.00 FOB Ningbo China

Contact : [email protected] Ordering & Delivery.




OEM Wind Generator POWER LOGGER

Graph displayed by theOEM Wind Generator POWER LOGGER

US$ 76.00FOB Ningbo China( not included with the generator )

The OEM data Recorder is apowerful tool unique to OEM thaallows you to record thewindmills performance to acomputer 24 hours a day.

The data can be viewed in grapform, as well as plotted to apower curve graph in respect toRPM.

The recorder will allow for 4parameters to be recorded,

Battery Voltage, AmpsGenerated, Windmill RPM, &Wind Speed (with the use of an

optional Anemometer not

supplied).


he OEM Wind Generator is made from the highest quality materials and gives top value fo

ur energy dollar. Designed to operate for 10 to 20 years, with regular maintenance.

you live in an area with an “annual average wind speed” of 11 MPH or higher, the wind generato

n Pay for itself in ONE YEAR!

esigned to work best with 24 Volt battery bank, this will help you to achieve an early “cut-in” and

aximize the annual power output. This wind generator will produce up to 5,840 Kilowatts perar.

you’re annual average wind speed is 13 to 20 MPH you may want to use a 48V battery bank inder to have a higher “cut-in” to maximize the “Higher Energy” in your higher wind speeds and

crease your annual power output.

Documents

Oem 2kw Wind Power Generator (Flyer) Current Stock of 2kw-2