October 2018 – Final Edition - Rockwell Automation...The ArmorView Plus 7 graphic terminal is a fully enclosed panel available in 12.1” size and features IP66 protection enabling

1

2018 Automation Fair® Event New Products and Solutions DirectoryOctober 2018 – Final Edition

Table of Contents

Rockwell Automation Products and Solutions

Integrated Architecture® PortfolioArmorBlock® I/O – IO-Link Hub and EtherNet/IP Universal I/O................................................. 5ArmorStart® ST with Network-based Safety ................................................................................ 6ArmorView™ Plus 7 Graphic Terminal.......................................................................................... 7Compact GuardLogix® 5380 Safety Controller.............................................................................. 8Connected Components Workbench™ Software Version 12........................................................ 9FactoryTalk® AssetCentre ............................................................................................................. 10FactoryTalk® View Machine Edition Version 11............................................................................ 11FactoryTalk® View Site Edition Version 11.................................................................................... 12FLEX 5000™ I/O SFP Adapters, Safety Digital Modules, and Parallel Redundancy Protocol (PRP) Support................................................................................................................................ 13Kinetix® 5700 Regenerative Bus Supply and Large Frame Drive................................................... 14Micro870® Controller AC Input Base............................................................................................ 15PanelView™ 5510 Graphic Terminal.............................................................................................. 16Stratix® 5800 Ethernet Switch....................................................................................................... 17Studio 5000® Design Environment................................................................................................ 18ThinManager® Software Version 11.............................................................................................. 19VersaView® 5200 Thin Clients Portfolio Expansion....................................................................... 20

ServicesRASWin 4.0: Risk Assessment Software for Windows.................................................................. 21ScanESC™....................................................................................................................................... 22

Smart Devices1494U – Larger Size Universal Visible-Blade Disconnect Switch................................................... 2342AF RightSight™ M30 Photoelectric Sensors.............................................................................. 2445DMS Distance Measurement Sensor......................................................................................... 2546CLR ColorSight™........................................................................................................................ 2646DFA fiber-optic Amplifier........................................................................................................... 2748CR Code Reader......................................................................................................................... 28Bulletin 1560F/1562F Medium Voltage Soft Start Controller....................................................... 29

2

Table of Contents continued

Rockwell Automation Products and Solutions

Smart Devices (continued)ClearMark™ Advanced Terminal Block Printer.............................................................................. 30Control Tower™ 856T Tower Lights............................................................................................... 31E300™ Electronic Overload Relay.................................................................................................. 32GuardShield™ 450L-E Advanced Light Curtain.............................................................................. 33IntelliCENTER® System Configuration for EtherNet/IP Motor Control Centers............................ 34New Safety Option for PowerFlex® 755 and 755T AC Drives........................................................ 35PowerFlex® 755T AC Drives Product Line Expansion.................................................................... 36Signal Conditioners........................................................................................................................ 37

The Connected Enterprise Industries PavilionAADvance®-Trusted® SIS Workstation software........................................................................... 38FactoryTalk® Analytics™ Data Explorer ........................................................................................ 39FactoryTalk® Analytics™ DataFlowML Version 2.1........................................................................ 40FactoryTalk® Analytics™ DataView Version 2.1............................................................................. 41FactoryTalk® Analytics™ Edge Version 2.2.................................................................................... 42FactoryTalk® Analytics™ Real-Time Optimization........................................................................ 43FactoryTalk® Brew™...................................................................................................................... 44FactoryTalk® Craft Brew................................................................................................................. 45FactoryTalk® Historian SE v.6.0..................................................................................................... 46FactoryTalk® Quality Management Version 4.2............................................................................ 47FactoryTalk® Warehouse Management Version 4.0..................................................................... 48Pavilion8® Version 5.16................................................................................................................. 49Performance Management Version 4.2........................................................................................ 50PharmaSuite® Version 9.1............................................................................................................. 51PlantPAx® System Release............................................................................................................. 52Production Management Version 4.1........................................................................................... 53PTC ThingWorx.............................................................................................................................. 54PTC Vuforia.................................................................................................................................... 55

3

Table of Contents continued

PartnerNetwork™ Products and Solutions

Advanced EnergyOnyx-M Optical Temperature Pyrometer...................................................................................... 56Data-Linc GroupSRM8000 Adaptive Spectrum, FHSS High-Speed Modem............................................................ 57Endress+HauserField Xpert SMT70 – Designed to Optimize Mobile Maintenance................................................ 58Liquiline CM72 & CM82 Compact Transmitters............................................................................ 59Memograph M RSG45 DIN Rail – Advanced Data Manager.......................................................... 60New Possibilities on Endress.com................................................................................................ 61Hammond Power Solutions HPS Titan® N Three Phase Encapsulated Transformer ................................................................. 62Littelfuse Inc.Littelfuse PSR High-Speed Semiconductor Fuses.......................................................................... 63nVent HOFFMAN 4/4X Filter Fan Shrouds................................................................................................................. 64HyShed Sanitary Washdown Enclosure......................................................................................... 65ModCenter – Automated Modifications Using CAD Data............................................................. 66SpectraCool Remote Access Control............................................................................................. 67Panduit Corp.NEMA 12 Micro Data Center (MDC).............................................................................................. 68Spectrum Controls Inc.4-inch High InView Display............................................................................................................ 69I/O Modules for the 2085 Micro850® Platform.................................................................... 70PowerFlex® 20-750-IF4XOF4-SC Combo Analog Input/Output Option Card…………………………….. 71StratusStratus ztC Edge Zero Touch Computing Platform........................................................................ 72TCI, LLCHGP with PQconnect: Harmonic Passive Filter with Remote Connectivity.................................. 73TripwireTripwire Enterprise with Tripwire Data Collector.......................................................................... 74Tripwire Log Center........................................................................................................................ 75

4

ArmorBlock® I/O – IO-Link Hub and EtherNet/IP Universal I/O

Features and Benefits:

• Wide operating temperature range from -20…+70 oC (-4…+158 °F)

• Rated IP65, IP67 and IP69K for harsh operating environment (varies by modules)

• IO-Link hubs are available in three options: 16 digital input, 10 digital input and 6 digital output, and 16 universal digital input and output to meet application requirements

• Supports diagnostics and high current output with EtherNet/IP connectivity through the 16-point universal digital I/O module

• M12 L-coded power connector allows more field devices to be connected for both IO-Link Hub and EtherNet/IP modules

Description: The latest addition to the existing ArmorBlock® I/O portfolio targets harsh applications that require a wideoperating temperature and weld-spark resistant housing. The EtherNet/IP universal I/O provides diagnostics toenable users to reduce time spent on commissioning and troubleshooting. EtherNet/IP modules are available inM12 L-coded and 5-pins 7/8” auxiliary power connectors. High current output support on the universal I/Oallows users to connect more output devices without additional cabling. For compact applications requiring highI/O count, the IO-Link hub allows users to connect both Smart and Standard devices in one IO-Link Mastersimplifying the system design. IO-Link hub offers three options for users to optimize their design for eachapplication.

Available for Sale: February and April 2019

Contact Information:Patti VivoloRockwell Automation+ 65 6622 5155 [email protected] Singapore

Learn more! Visit the Integrated Architecture® Exhibit (#1225) at the 2018 Automation Fair® event.

Return to Table of Contents5

ArmorStart® ST with Network-based Safety


• Network-based safety provides Category 4 PLe STO Safety that minimizes design and installation costs

• Embedded User Safety I/O option increases flexibility

• Embedded User I/O can provide up to six Inputs or two outputs to connect sensors and actuators quickly

• Local control (HOA) mode option helps decrease installation and maintenance cost

• Helps minimize the overall system components required to implement safety

Description: The ArmorStart® ST with Network-based Safety is ready to meet your Connected Enterprise needs. It applies Integrated Control and Safety architecture to help reduce system complexity and creates better alignment of your standard and safety On-Machine™ motor control architecture. ArmorStart® ST with Network-based Safety helps reduce the number of components necessary to implement functional safety and reduce installation complexity. ArmorStart® ST with other on-machine components is shown to reduce design, commissioning, and installation costs by more than 50%, when compared to more traditional installations.Lastly, ArmorStart® ST with Network Safety is designed with industry-leading technology that supports premiere integration with Allen-Bradley® Logix family of controllers.

Available for Sale: March 2019

Contact Information:Julie WeberRockwell Automation+1 262 512 [email protected], WI, United States



ArmorView™ Plus 7 Graphic Terminal


• Fully enclosed panel for a cabinet free solution

• IP66 rated exterior for on-machine applications

• Convenience – space saving design, separate push buttons, low installation overhead, minimized wiring

• Flexibility – individually customized buttons and switches, orientation mount options

Description: The ArmorView™ Plus 7 graphic terminal is a fully enclosed panel available in 12.1” size and features IP66protection enabling a low-cost cabinet free HMI solution. It offers convenience features, including a space andcost saving design that makes an additional enclosure unnecessary, separate push buttons, and lowinstallation overhead. This HMI is easily connected, and Ethernet I/O communication minimizes wiring. Thisterminal offers options to increase flexibility, such as buttons and switches that can be individually customizedto meet the needs of each machine, and orientation mount options from either a swing arm, pedestal, orfixed surface.

Available for Sale: January 2019

Contact Information:Tiffany PfremmerRockwell Automation+1 414 382 [email protected], WI, United States



Compact GuardLogix® 5380 Safety ControllerRight-sizing your Safety Solutions to Optimize Cost and Performance


Scalable• Achieve SIL 2 / PLd with 1oo1 architecture• Standard memory options 0.6…10.0 MB• Safety memory options 0.3…5.0 MB• Communication options for up to 180 EtherNet/IP nodes• Conformally coated options for harsh environments

Integrated• Single controller for Standard and Safety Control• Single software for Standard and Safety Control• Single network for Standard and Safety Control• Mix and match safety and standard I/O• Networked Safety Functions with Drives and Motion

High Performance• Optimized for faster safety reaction time to help reduce safe

distance and risk of injury

Description: Manufacturers are continually looking for control solutions that adhere to the latest global safety standardswhile dealing with competitive pressures to reduce costs and improve productivity. As the latest addition tothe CompactLogix™ 5380 family of controllers, the Compact GuardLogix® 5380 delivers scalable options forhigh performance, integrated safety in standard and conformally coated formats.

Available for Sale: Now




Connected Components Workbench™ Software Version 12


• Logix user experience with Micro800® Logix theme and PanelView™ 800 Usability Feature Pack

• Includes Micro850® 48-pt controller simulator with EtherNet/IP, simulated digital and analog I/O with Micro800™ plug-in and expansion I/O modules

• Configure device communications using RSLinx® Classic for optimum device compatibility or to FactoryTalk® Linx for enhanced security and OPC UA support

• Supports Micro870® 24-point controller with 120V AC inputs; E200 Electronic Overload Relay; trending for monitoring PowerFlex® drives

• Save time with PanelView™ 800 DesignStation by importing CompactLogix™5370 controller tags from Studio 5000 Logix Designer® in L5X file format with a few clicks, and Micro800™ controller tags without the need to select and name tags individually

Description:Simplify your standalone machine development for multiple industries with the Connected Components Workbench™ software, which offers controller programming, device configuration, and integration with HMI editor as one package. Reduce your development time with Version 12 that includes Logix theme for a more comfortable Logix user experience. Shorten your programming process with sample code, user-defined functions (UDFs), and user-defined function blocks (UDFBs) and scale controllers and applications with converter tool and copy/paste feature. Moreover, this version supports device communications to FactoryTalk® Linx, includes Micro850® 48-pt controller simulator and PanelView™ 800 DesignStationenhancements. Device support is extended to Micro870® 24-point controller with 120V AC inputs, which complements the existing 24-point DC input controllers, Micro800™ microSD™ plug-in for data log and recipe, E200 electronic overload relay, and trending for PowerFlex® drives including the PowerFlex® 755T AC drive.

Available for Sale: February 2019

Contact Information:Patti VivoloRockwell Automation+65 6622 5155 [email protected] Singapore



FactoryTalk® AssetCentre


• Secure communications with new IPSec adoption that supports encrypted communications and increased integration of FactoryTalk® Linx software that enables disaster recovery and support for secured communication zones

• Now supports native disaster recovery of FactoryTalk® View SE software distributed assets, allowing for version management and backup scheduling of FactoryTalk® View SE software network applications

• Create schedules to back up the infrastructure of your equipment with Stratix® fully managed switches

• Extended third-party asset support, which allows customers to script solutions for third-party development software to execute disaster recovery remotely

• To support additional lifecycle content, FactoryTalk® AssetCentre now includes I/O for the PLC, SLC™, MicroLogix™, CompactLogix™, and ControlLogix® controllers

Description: FactoryTalk® AssetCentre provides you with a centralized tool to secure, manage, version, track, and reportautomation-related asset information across your entire facility. The latest release includes an update withIPSec adoption that supports encrypted communications, and FactoryTalk® Linx integration that enhancesdisaster recovery. Create schedules to back up the infrastructure of your equipment with Stratix® fullymanaged switches. Additionally, with extended third-party asset support, customers can script solutions forthird-party software to execute disaster recovery remotely. With asset extended properties, add up to 20custom description fields to your assets. FactoryTalk® AssetCentre v9 release is focused on improvingproductivity, quality, and the security of your automation systems.





FactoryTalk® View Machine Edition Version 11


• Updated responsive interface provides improved performance for display prompts on PanelView™ Plus 7 HMI –for all versions back to version 8.20

• Improved integration process between MobileView™ HMI application versions and PanelView™ Plus 7 HMI applications enhances the delivery of MobileView™ runtime firmware

• Build applications in a machine-appropriate layout with an updated on-screen keyboard and built-in controls for 4/6” PanelView™ Plus 6 and 7 Standard HMIs that support portrait mode rotation

• Improve maintenance and reduce overload of the onboard audit message log without duplicate audit log messages

Description: FactoryTalk® View Machine Edition is a versatile solution for machine-level operator interfaces. FactoryTalk® View ME software provides machine builders and OEMs with a comprehensive toolset to build and manage their applications. The FactoryTalk® View ME runtime environment leverages the power of FactoryTalk®platform for a consistent operator interface across multiple platforms, including PanelView™ Plus 7 graphic terminals, MobileView™ terminals, and Windows desktop systems.





FactoryTalk® View Site Edition Version 11


• Automate backups and manage versions of FactoryTalk® View SE applications with integration to FactoryTalk® AssetCentredisaster recovery

• Provide operators with visibility to events in their process by capturing, trending, and displaying FactoryTalk® Alarms andEvents production events

• Build advanced trends that can overlay operator actions and alarm events with production data using the TrendPro control

• Increase flexibility with enhanced ThinManager® software integration, enabling shared ThinManager® and FactoryTalk® View SE client licensing

• Secure and track operator actions with enhanced E-Signature approval confirmation, built in to display objects such as buttons and value entry fields

Description: FactoryTalk® View Site Edition HMI software provides application developers, operators, maintenanceengineers, and supervisors with a complete automation control interface system. The latest release providesimproved workflows to decrease engineering and maintenance time, and advanced integrated tools that canincrease productivity. Extend these capabilities beyond the plant floor with the native mobility and web-enabled features of FactoryTalk® ViewPoint software. Pair FactoryTalk® AssetCentre software withFactoryTalk® View software to maximize the uptime and reliability of your FactoryTalk® system.





FLEX 5000™ I/O SFP Adapters, Safety Digital Modules, and Parallel Redundancy Protocol (PRP) Support


• Ethernet adapter with small form factor pluggable (SFP) support for flexible media (fiber/copper), available in extreme environment (XT) and non-XT variants as catalog numbers: 5094-AENSFPR, 5094-AENSFPRXT, 5094-AEN2SFPR, 5094-AEN2SFPRXT

• Parallel Redundancy Protocol (PRP) and Device Level Ring (DLR) support for high-availability in Ethernet networks are available as firmware update for all Ethernet adapters

• Support for Safety and Automation Control in one flexible and reliable distributed I/O platform with additional catalog numbers: 5094-IB16S, 5094-OB16S, 5094-OW4IS

• Safety I/O modules are rated SIL 3, cat. 4 and PLe

Description:FLEX 5000™ I/O has excellent reliability and is a flexible I/O solution that is hardened for application requirements with the ability to operate at -40˚C to 70˚C. This release introduces the SFP adapters in extreme environment (XT) and non-XT variants, which allow FLEX 5000™ I/O to provide native support for both copper and fiber-optic media, reducing the need for additional media converters. It also enhances communication with 1 Gb EtherNet/IP connectivity. In addition, the firmware update for all Ethernet adapters enables Parallel Redundancy Protocol (PRP) support that provides highly reliable and highly available communication networks with zero recovery time for data transmission. As part of offering the automation and safety functionality in one I/O solution, the discrete safety I/O are introduced with SIL 3, cat. 4, PLe rating and designed to fit into the standard FLEX 5000™ I/O system. Apart from the 16-point discrete input and output modules, the release also includes a 4-channel relay output module.

Available for Sale: December 31, 2018




Kinetix® 5700 Regenerative Bus Supply and Large Frame Drive

Features and Benefits

Kinetix® 5700 Regenerative Bus Supply:• Consistent machine performance globally - regardless of input AC

voltage, this bus supply performs common DC bus voltage regulation

• Energy cost savings – excess energy regeneration back to the grid or for plant-wide use

• Integrated LC Filter reduces installation costs and reduces cabinet space

Kinetix® 5700 Large Frame Drive:• Largest power range that Rockwell Automation servo drives offer –

now up to 112 kW

• Load observer technology saves commissioning time by mitigating the need to tune most motion axes

• Advanced safety features allow access to a machine while maintaining a safe state, without shutting down the machine

Description: The Kinetix® 5700 regenerative bus supply has the capability to regenerate excess energy back to the grid,leading to energy cost savings. It leverages EtherNet/IP to monitor energy usage. This supply has best-in-classpower density, and can lead to a 40–70% reduction in use of cabinet space. With single cable technology, itallows for 60% less wiring. The Kinetix® 5700 large frame servo drive features integrated safety and offers anextended power range up to 112 kW. Embedded runtime tuning technologies can dramatically reducecommissioning time for this servo drive. Both the bus supply and servo drive are CIP security capable andoffer defense in depth to address different types of physical and electronic threats.

Available for Sale: December 2018




Micro870® Controller AC Input Base


• Catalog number: 2080-LC70-24AWB

• Embedded 120V AC input type for AC sensors. AC sensors are suitable for applications with long distance between the controller and the sensor, and are more immune to noise than DC sensors

• Micro870® 24-point controller, supports up to 20,000 program steps and up to 128 KB user data

• Supports up to three Micro800™ plug-in modules, up to eight expansion I/O modules and up to 304 I/O points

• Requires Connected Components Workbench™ software version 12

Description: Machine builders and end users who look for customizable, cost-effective, and space-saving solutions withjust the right performance often choose the Micro800™ controller family. The all-new Micro870® controllerimproves scalability of the Micro800™ controller platform with double the memory capacity of Micro850®controller and supports up to eight expansion I/O modules. The Micro870® controller brings the benefits ofMicro800™ controller platform to your larger and more complex standalone applications. The Micro870®controller is now available with 120V AC input type.

Available for Sale: March 2019




PanelView™ 5510 Graphic Terminal


• Logix-based alarms are automatically available, reducing the need for additional configuration

• High-speed HMI buttons provide quick response and feedback for machine jogging applications

• Logix tag extended property support helps develop richer content

• Intuitive navigation menu reduces configuration time

• Scalable vector graphics automatically adjust objects and screens to any terminal size

• Create custom, reusable add-on graphics to more efficiently build your applications

Description: The PanelView™ 5510 graphic terminal was designed for OEMs and end users who require a high degree ofintegration between their HMI and controller. Wide range of display sizes from 7" to 19" with wide screen,touch and keypad options. EtherNet/IP with DLR and embedded switch technology supports ring topology fornetwork fault tolerance and reduced downtime. A physical navigation button on the terminal easily displaysinformation. Both AC and DC power options offer application flexibility.





Stratix® 5800 Ethernet SwitchModular industrial managed switch for diverse applications

Scalable• Supports 10–26 ports applications

• 10-port base switch with 8 or 16-port expansion modules

• Wide variety of copper, fiber and PoE port options

Optimized Integration• Supports both IT and OT programming and support tools

• Premier integration into the Integrated Architecture® system

• Embedded Cisco technology

High Performance• All Gigabit platform

• Layer 2 or layer 3 firmware options

• Robust switching, routing and security feature sets

Description: The Stratix® 5800 is the next generation modular switch that provides the flexibility to meet a wide variety of layer 2 (access) and layer3 (routing) network applications. The all gigabit platform and robust feature set support high-performance network requirements now and into the future. The S5800 combines advanced Cisco technology and premier integration into the Integrated Architecture® to provide solutions for both IT and OT professionals.

Available for Sale: Q2 2019




Studio 5000® Design Environment


• Studio 5000 Logix Designer® application supports AutomationML for data exchange along CAD tool chains

• Studio 5000 Logix Designer® enhancements include 64-bitmath instruction support, new intuitive FBD Functions and Alarm Library Management improvements

• Use the new ControlFLASH Plus™ to reduce time updating multiple devices with new batch and parallel flashingcapabilities

• Studio 5000® Application Code Manager auto creates parent/child objects with library links and adds library artifacts to libraries, including user documentation and FactoryTalk® View Global Objects

• Design, test, validate and commission machines by combining Simulink or FMI simulation models with the new Studio 5000® Simulation Interface

Description:The Studio 5000® design environment combines engineering and design elements into one standard framework that enables optimized productivity and reduced commissioning time. This release of Studio 5000® includes major updates to both Logix Designer application and Application Code Manager. The new release of Studio 5000® Simulation Interface enables the integration of simulation tools to help build a digital twin to better design and validate systems. ControlFLASH Plus™ latest release allows users to manage their devices lifecycle natively and increases productivity by updating multiple devices simultaneously. The Studio 5000® v32 software release is focused on optimizing productivity, increasing efficiency, and simplifying workflows.





ThinManager® Software Version 11


• FactoryTalk® Activation – Users can activate ThinManager®using the traditional method or take advantage of FactoryTalk® Activation. FactoryTalk® View SE users only need one client license to deliver as many FactoryTalk® View SEsessions to a single terminal

• Localization – ThinManager® supports more languages

• Facial Recognition – ThinManager® adds the ability to use facial recognition as an additional authentication method for ThinManager® users

• MultiMonitor™ Enhancements – ThinManager® supports up to seven monitors on a single terminal. MultiMonitor™ willsupport the VersaView® 7 monitor thin client that will be available in early 2019

Description: ThinManager® version 11 continues to improve visualization, security and usability by offering several new features that enhance the end-user experience and increases the security of accessed content managed by the platform. Increased support and licensing improvements between ThinManager® and FactoryTalk® View SE solutions save our customers more time and simplify the licensing requirements for building The Connected Enterprise. Enhanced localization increases usability of the platform for customers in non-English speaking regions around the globe.


Contact Information:Tom JordanRockwell Automation+1 770 549 [email protected], GA, United States



VersaView® 5200 Thin Clients Portfolio Expansion


• ThinManager® ready for centralized management solutions for modern plants

• VersaView® 5200 Single Display thin client includes oneDisplayPort video output and a compact design targeted for cost conscious applications

• VersaView® 5200 Dual 4K Display thin client offers a high-performance quad core Intel Atom CPU for applications with demanding applications and complex virtual screens, and multiple IP camera feeds

• VersaView® 5200 Multi-4K Display thin clients offer a high-performance quad core Intel i5 CPU for applications requiring multiple displays with demanding applications. Includes three or seven 4K Displays

Description: The VersaView® 5200 thin clients have no operating system and are ideal for distributed applications. The thinclient computers are used for remote access to a server, where the thin client depends on the main server tofulfill its role. You can have many thin client computers configured across your plant or facility with variousroles, with the main server maintaining all the roles. The VersaView® 5200 thin clients are ThinManager®ready for centralized management solutions for modern plants. Using the VersaView® hardware withThinManager® software allows control and security in a sustainable and scalable platform regardless of thesize of your industrial environment or number of facilities.

Available for Sale: November 2018




RASWin 4.0: Risk Assessment Software for Windows


RASWin 4.0 is your most complete software platform designed to develop and manage all documentation to support the machine safety lifecycle, including:

• Definition of hazard areas

• Guided selection of corrective measures based on ISO standards

• Risk analysis module in accordance with ISO 12100 and ISO TR 22100-2

• PL calculation and graphical PL modules

• Safety requirements specifications

• Validation

• Risk assessment, safety function and validation reporting tools

Description: Complete Safety Solutions to Streamline Development, Improve Compliance and Reduce Cost.The updated RASWin 4.0 tool helps customers consistently manage documentation of the entire safety lifecycle: risk assessments, functional requirements, safety system design, verification and validation.

RASWin 4.0 simplifies this process with a powerful yet intuitive user interface that helps customers save time and gain confidence while managing the safety lifecycle. It verifies that a safety system meets all requirements, and consistently documents processes to maintain compliance.

Leveraging the industry’s most complete offering of safety products, when RASWin 4.0 is used with Safety Automation Builder® software, customers take advantage of widely-accepted best practices to build a complete safety solution. With simulation of application development – including hard guarding, input/output devices, control systems and connectivity – the combination of these tools help to develop the most effective and productive safety solutions.

Available for Sale: November 14, 2018

Contact Information:Gigi LorenceRockwell Automation+1 440 646 7703 [email protected] Village, OH 44143

Learn more! Visit the Connected Services Exhibit (#153) at the 2018 Automation Fair® event.


ScanESC™


Simplify Your Life with Our Fully Electronic LOTO Program

• Access your LOTO procedures with any iOS, Android or Windows mobile devices

• Access your LOTO procedures anywhere, anytime

• Access and use Standard Operation Procedures (SOP)

• Access supporting documentation and policies for your machines and facilities

• Electronically audit procedures and employees

• Track LOTO usage and downtime

• Assign audits to individuals

• Manage and access all LOTO audit data through a standard web browser

Description: ScanESC provides your customers with the capability of digitizing their entire lockout/tagout (LOTO) program, so that all information available to employees is up-to-date and readily available through an intuitive, user-friendly interface. As a cloud-enhanced system, ScanESC allows customers to collect data and track activities even if offline, synchronizing all necessary information once connectivity is restored.

ScanESC provides the tools and resources to modernize and digitize an entire LOTO program with enough adaptability to be useful to large corporations, small businesses and anyone in between. Customers can expect immediate savings over current audit and lockout processes, and are able to make real-time decisions to proactively achieve employee safety and compliance with company policy and government regulations.

With ScanESC – a modern software solution to help manage LOTO programs – customers can benefit from real-time synchronizing of data between authorized employees and a cloud-based secure portal.


Contact Information:Gigi LorenceRockwell Automation+1 440 646 7703 [email protected] Village, OH 44143

Learn more! Visit the Connected Services Exhibit (#153) at the 2018 Automation Fair® event.


Your Image Here(low res)

1494U – Larger Size Universal Visible-Blade Disconnect Switch


• Now available in 200, 400 and 600 A sizes

• Configure easily with modular design and accessories

• Optimize panel location with highly flexible cable operator

• Save panel space with multiport lugs

• Reduce cost with aluminum lugs and direct mountable fusing (J-type)

• Deploy anywhere with global certifications

Description: Now users with higher current applications—through 600 A—can take advantage of the Allen-Bradley® 1494 universal visible-blade disconnect switch. This switch provides customers the extra level of visual ON or OFF indication of a knife-blade disconnect design. The switch addresses the needs across industries with a global customer base by providing UL, CSA, CE and CCC ratings in one product line.


Contact Information:Austen ScudderRockwell Automation+1 414 218 [email protected], WI, United States

Learn more! Visit the Smart Devices Exhibit (#801) at the 2018 Automation Fair® event.


42AF RightSight™ M30 Photoelectric Sensors


• Robust right angle housing with 30 mm threaded nose and universal 18 mm threaded base for maximum installation flexibility

• 360-degree highly visible status indicators

• DC only and Universal (AC/DC) available models

• Dual Auto PNP/NPN helps streamline inventory by reducing the number of SKUs to stock

• Transmitted Beam (80 m) and Polarized Retroreflective (10 m) Sensing Modes

• Embedded IO-Link 1.1 communications protocol offered in all sensing modes enables customers to access enhanced diagnostic feature

• Firmware update and embedded IODD ready

• IP67, 1,200 PSI and IP69k rated enclosure

Description: The 42AF RightSight™ M30 family of photoelectric sensors offers long range and high-performance general-purpose sensing in a robust, easy to install flexible mounting package. These sensors are ideal for applications where simplified installation and maintenance are required. RightSight™ M30 sensors can be mounted against a surface or can be installed using the threaded 18 mm base mounting options.

Designed to withstand the rigors of food processing and material handling environments, the RightSight™ M30 standard models can withstand repeated 1200 psi and IP69K high-pressure washdowns.


Contact Information:Todd BissellRockwell Automation+1 978 446 [email protected], MA, United States



45DMS Distance Measurement Sensor


• Embedded IO-Link communication protocol helps minimize downtime and increase productivity

• Class 1 Eye Safe Laser helps alignment and installation

• Ideal for precision distance measurements

• Sensing ranges:

• 60 mm…5 m (2.36 in. …16.40 ft) 90% white paper• 50 mm…3 m (1.97 in. … 9.84 ft) 6% black

• Accuracy:

• ± 30 mm (± 1.18 in.) Linearity• ± 5 mm (± 0.197 in.) Repeatability• ± 1 mm (± 0.039 in.) Resolution

• 3-in-1 Sensing Mode can be easily interchanged in one unit for Distance Measurements, Background Suppression and Background reflection

• IP67 and IP69k rated enclosure for use in harsh environments

Description: The new Allen-Bradley® 45DMS Distance Measurement Sensor from Rockwell Automation is ideal for precise distance measurement of targets. It features IO-Link functionality for enhanced diagnostics and linkage to The Connected Enterprise.

Available for Sale: September 30, 2018




46CLR ColorSight™


• Sensing models address your needs:

- Glare Suppression –18...32 mm

- Small Spot Size–18...60 mm

- Long Range–20...150 mm

• Patent-pending distance correction technology delivers consistent color detection of up to ranges of 65 mm

• Internal storage of up to seven colors when operating in color match mode and unlimited colors by using IO-Link when connected to CompactLogix™ controllers

• Access true RGB color value using IO-Link when connected information can be accessed through IO-Link

• 3 Discrete Outputs with Auto PNP/NPN

• IP67 and IP69 zinc die cast enclosure

Description: The new Allen-Bradley® 46CLR True Color Sensor from Rockwell Automation is a high-performance colorsensing solution. The sensor features patent pending distance correction technology that delivers consistentcolor detection at ranges up to 65 mm. Additional features include internal storage of up to seven colorswhen operating in color match mode, and embedded IO-Link functionality for enhanced diagnostics andlinkage to The Connected Enterprise.





46DFA Fiber-Optic Amplifier

Features and Benefits: • Dual high visibility displays provide configuration and

operation feedback that simplify sensor setup, operation and maintenance

• Economy display mode reduces amplifier power consumption by 25%

• Teachable LED intensity provides added flexibility in applications where there’s a need to detect clear or transparent objects

• Fast-response output using pin 2 when connected using IO-Link enables continuous sensor monitoring

• Fast response speeds of 50 μs, 65 μs, 500 μs, 4 ms, and 32 ms allows operators easy adaptation of the sensor response time

• Selectable PNP and NPN output using push button simplifies inventory

• Embedded IO-Link 1.1 Communication protocol is offered in all standard modes

• IP40 rated enclosure

Description: The new Allen-Bradley® 46DFA fiber-optic Amplifier from Rockwell Automation features two high-visibilitydisplays that make this sensor easier to set up, operate and maintain when compared to previous RockwellAutomation and competitive offerings. Embedded IO-Link functionality offers enhanced diagnostics andlinkage to The Connected Enterprise.





48CR Code Reader


• Smallest Allen-Bradley® industrial reader with EtherNet/IP: 44.45 mm (1.75 in) x 25.4 mm (1.00 in) x 44.45 mm (1.75 in)

• High-end performance in a compact design

• Provides clear, high-speed scanning on 1D/2D codes (Including difficult DPM (Direct Part Marked) codes)

• 1.2 MP resolution available

• 0.050…1.0 m range (lens and target dependent)

• 16-LED integrated illumination (white and red)

• Simple setup button

• Connectors: • Power and I/O – M12 x 8• Ethernet – M12 x 4

Description: The Allen-Bradley® 48CR with EtherNet/IP is a compact, high-performance code reader capable of solving simple label decodes and difficult low contrast DPM decodes. The 48CR easily scans 1D/2D codes with high-speed accuracy in automotive and general manufacturing environments. The 48CR features include 1.2 MP resolution, 0.050…1.0 m range, 16-LED integrated illumination, simple setup button, and status indicators.





Bulletin 1560F/1562F Medium Voltage Soft Start Controller


• Offers enhanced modes of operations to meet various application needs

• 10 starting modes of operation• 4 stopping modes of operation

• Uses integral motor winding heater (Starting Feature)

• Includes torque control start

• Equipped with pump Control Mode

• Features advanced diagnostic and metering functionality

• Motor and Controller Protection• Power and Energy Monitoring• Trending and Performance Diagnostics• “Snap Shot” Diagnostics• Fault and Alarm Event Logs

• Offers built-in Set-up / Commissioning Wizard

• Features autotuning

Description:

Bulletin 1560/1562F, the next generation Medium voltage soft start controller features SMCTM-50 Advanced smart motor control module. This controller is designed for customer flexibility, offering a distinct differentiation in market through its flexible modes of operation and advanced diagnostic capabilities.





ClearMark™ Advanced Terminal Block Printer


• The ClearMarkTM Advanced marking system offers flexibility by printing on marker cards that can be used on terminal blocks, wires, cables and other industrial components

• Speed - It takes less than 2 minutes to print and cure a full marker card

• Runs on easy to use ClearTools™ software

• High quality: 600 dpi or 1200 dpi

• Capable of color printing

• Ideal for High Volume Marking

• Greater than 50 marker cards per week• Use 3–5 days a week

• Can print on either full or half-sized marker cards

• Integrated cleaning solution helps prevent print head clogs

Description: We offer multiple marking solutions for industrial equipment, wires, and terminal blocks. TheClearMultiprint™ marking system is designed for many types of users that require high-speed printing, nodrying time, and a compact footprint. The ClearPlot™ marking system is robust and flexible enough to allowpartial marking on cards or up to three cards at a time for low to medium volume uses. This launch adds anadvanced printer for high-volume terminal block users.





Control Tower™ 856T Tower Lights


• Able to monitor critical conditions of the machine in onesignaling device – seven circuits available

• Offers more reliable performance in tough environmental conditions

• IP66/67 ingress rating• Extended operating temperature range (-30°…+70 °C)

• Easier selection thanks to a reduced number of components

• Minimized installation and setup time • Easy wire termination (Push-in terminal blocks or M12

quick disconnect bases)• Internal DIP switches to select module output or

function

• Multiple audible choices to complement the visual indication

• Available for purchase as separate components or as pre-configured, factory-assembled stack lights for optimal flexibility

Description: Our Bulletin 856T Control Tower™ Stack Light signaling system features a proven, modular construction design incorporating bright LED illumination and a broad offering of sound technologies all in a 70 mm diameter housing. All signals in the system are 24V AC/DC powered, which means that just three power modules can cover the entire system. This new design allows the 856T to meet the widest range of signaling applications with a reduced number of components without compromising functionality and flexibility.

Available for Sale: July 5, 2018




E300™ Electronic Overload Relay


• Includes intelligent motor control (EtherNet/IP and DeviceNet enabled)

• Offers a scalable solution

• Provides diagnostic information

• Includes integrated I/O

• Provides adjustable trip class 5…30

• Offers wide current range

• Includes Test/Reset button

• Offers programmable trip and warning settings

• Includes true RMS current/voltage sensing (50/60 Hz)

• Provides protection for single- and three-phase motors

• Offers customization with Communication, Control or Sensing Modules

Description: The Allen-Bradley® Bulletin 193/592 E300™ Electronic Overload Relays offer a flexible design, simplified wiring, and seamless Logix integration. Real-time diagnostics are transformed into actionable information that can maximize your uptime and help protect your assets.

Available for Sale: July 29, 2018 (Module B available November 2018)

Contact Information:Heather KoehnRockwell Automation+1 414 217 [email protected], WI, United States



GuardShield™ 450L-E Advanced Light Curtain


• Extended features and functionality from the 450L-B such as cascading, built-in muting and blanking

• Embedded functions configured quickly and easily via DIP switches or software, significantly reducing engineering effort

• Muting, blanking, start mode, external device monitoring (EDM), scanning range

• Enhanced Integrated Laser Alignment System for quick installation and more reliable operation

• Active protective field provides sensing over the entire length of a transceiver

• Compact design 30 mm x 30 mm (1.18 in. x 1.18 in.)

• Wide range of protection heights 150…1950 mm (5.9…76.7 in.)

• IP65 enclosure rating

• TÜV certified Type 4 IEC 61496-1/-2, PLe, SIL CL3 per EN ISO 13849-1, IEC 62061

Description: The Allen-Bradley® GuardShield™ 450L-E Safety Light Curtains from Rockwell Automation are based on a unique patented transceiver technology that allows each stick to be used as a transmitter or as a receiver. The full functionality of a transceiver is provided by plug-ins inserted at the bottom of the sticks. By using only one stick type with the optimal plug-ins selected based on the requirements of the application, the GuardShield™450 L portfolio is a simple, cost-effective solution that offers enhanced flexibility while maintaining high levels of safety.

Available for Sale: July 30, 2018




IntelliCENTER® System Configuration for EtherNet/IP Motor Control Centers


• Automatic firmware update to latest version for all devices

• Enhanced pre-shipment parameter configuration

• Digital download of IntelliCENTER® data for faster Logix integration and integration into IntelliCENTER® Software

• Helps minimize the overall burden of device integration during installation and commissioning

Description:IntelliCENTER® EtherNet/IP Motor Control Centers (MCCs) are a key component of The Connected Enterprise. MCCs help provide a safer and more reliable and robust package for a networked system of intelligent components. The IntelliCENTER® System Configuration project has changed customer’s expectations of EtherNet/IP MCCs. This validated and tested network system now confirms that all intelligent devices have up-to-date firmware, thus simplifying the commissioning effort during installation and startup. In addition, EtherNet/IP MCCs can be delivered with custom parameter configurations on end devices, reducing application integration time. All of this is delivered with best-in-class lead times due to automated innovations in our manufacturing facilities.





New Safety Option for PowerFlex® 755 and 755T AC Drives

Integrated Safety Functions Option Module

Features and Benefits

• Delivers advanced safety functions for PowerFlex® 755 and PowerFlex® 755TL, 755TR, and 755TM AC drives

• Provides safety via an EtherNet/IP network

• Provides rating up to and including SIL CL3, cat. 4, and PLe

• Safety instructions are based on IEC 61800-5-2. Specific functions: STO, SS1, SLS, SDI, SBC, and SLP; PowerFlex® 755T drives also offer SS2 and SOS

• Requires Studio 5000 Logix Designer® application version 31 or later

• Features four general-purpose safety inputs and two safety outputs that are embedded in the module

Description: A new integrated safety functions option module provides PowerFlex® 755 and PowerFlex® 755TL, 755TR, and755TM AC drives with advanced safety on an EtherNet/IP network. Safety instructions are based on IEC 61800-5-2, including ability to monitor speed, direction, and position. Specific functions are: STO (Safe Torque Off), SS1 (Safe Stop 1), SLS (Safely-Limited Speed), SDI (Safe Direction), SBC (Safe Brake Control), and SLP (Safely-Limited Position). PowerFlex® 755T drives also offer SS2 (Safe Stop 2) and SOS (Safe Operating Stop). The Integrated Safety Functions option requires Studio 5000 Logix Designer® version 31 or later and provides safety ratings up to and including SIL CL3, cat. 4 and PLe.

Available for Sale: October 1, 2018




20-750-S4 Option Module

PowerFlex® 755T AC Drives Product Line Expansion


• The PowerFlex® 755T family of AC drives for harmonic mitigation, regeneration and common bus solutions is expanding its power ratings. New ranges are:

• 400…480V: 7.5…3600 kW/10-6000 Hp• 600…690V: 10…5100 Hp/11-4500 kW

• Expanded adaptive control capabilities to compensate for variances and help improve uptime

• Additional Predictive Maintenance features provide real-time information about the health of a system to help reduce unplanned downtime.

• New networked advanced safety option supports eight IEC 61800-5-2 safety functions, including ability to monitor speed, direction and position

• Enhanced DeviceLogix™ to program drive functionality without a controller

Description:The PowerFlex® 755T family of AC drives is expanding its power ratings 10–6000 Hp across our regenerative, common bus and low harmonic drives. Also expanding is our patented TotalFORCE® technology. Enhancements to the TotalFORCE® technology include new Predictive Maintenance features that provide real-time information about the health of a system. These enhancements help reduce unplanned downtime, and expanded adaptive control capabilities that compensate for line side disturbances and help improve uptime. A new advanced safety option module supports eight IEC 61800-5-2 safety functions via an EtherNet/IP network, including ability to monitor speed, direction and position.





Signal Conditioners


NANO SeriesSignal Options: Analog, Bipolar, Thermocouple, RTD, Universal

• Space savings – Thin 6 mm profile• Time savings – Power bus DIN rail makes power supply

wiring for each device unnecessary• Quick configuration – DIP switches on the housing • High accuracy - up to 0.05% • High galvanic isolation - 2.5 kV AC• Fast response <5/<7 ms (>100 Hz signal bandwidth) for

analog signals, <30 ms for temperature measurements

SMART SeriesSignal Options: Analog, Strain Gauge, Current (through hole/In-line), Voltage, Frequency, Temperature, Universal

• Interactive display to read and configure• High level of galvanic isolation 2 kV and above• Up to 0.05% accuracy• Alarm functions • Flexible supply voltage• Universal input options

Description: The new Allen-Bradley® 931 Signal Conditioners offer a comprehensive solution for your signal conditioningneeds. Our new products use state-of-the-art technology to provide optimal signal isolation, conversion andamplification. The new NANO and SMART series provide tremendous space and time savings throughimprovements made to simplify the configuration and installation process. The products offer high levels ofgalvanic isolation. The products are certified by c-UL us, CE, ATEX, IECx, FM, KC, and RCM for use by globalcustomers. The portfolio also offers products with Class/Division/Zone ratings for use in hazardous locationapplications.

Available for Sale: April 2019

Contact Information:Todd BissellRockwell Automation +1 978 446 [email protected], MA, United States



AADvance®-Trusted® SIS Workstation software


• Compatible with all latest Windows releases (8, 10, Server)

• Faster development and compilation time

• Unified environment for Trusted® and AADvance® systems

• Based on a Visual Studio Shell. Intuitive development tools and workflows

• Full migration capabilities from all your Trusted® and AADvance® projects

• Assessed as a T2/T3 offline tool, as per IEC61508 ed. 2. Can be used in process safety systems, up to SIL 3

Description: AADvance®-Trusted® SIS Workstation software is combining two tools into one: AADvance® Workbench and Trusted® Toolset. You no longer have to learn/install/maintain separate tools for your various process safetyneeds.

This redesigned development environment supports the latest Windows versions, offers an intuitive and natural methodology of creating your safety applications and complete migration of your existing AADvance® and Trusted® applications. No need to reprogram. No need to reconfigure. No regrets.

Available for Sale: Q1 2019

Contact Information:Stefan MizeraRockwell Automation+1 514 817 [email protected], QC, Canada


Learn more! Visit The Connected Enterprise Industries Pavilion (#419) at the 2018 Automation Fair® event.

FactoryTalk® Analytics™ Data Explorer


• Visualize past data for information discovery

• Clean data graphically and simply

• Wizard for smart, flexible time-merge of diverse data

• Quick statistical summaries

• Correlation and ranking including determination of shifts in time

• Export prepared data for reporting, or to diverse ML toolsets

• Transform data for enhancement without programming

Description: The first step in Analytics is gathering data, aligning different data sources and preparing it to learn about a system, problem, or process. Machine Learning algorithms are powerful new tools to develop useful models to improve manufacturing. However, frequently there is insufficient aligned data from diverse manufacturing systems, problems with data or significant periods that are irrelevant to the task at hand. In addition, There can be data management issues, such as excessive compression. With FactoryTalk® Analytics™ Data Explorer software you can visualize and graphically interact with the data to observe and detect issues. Data Explorer provides an array of tools to clean, align and interpolate, and enrich data with known concepts, and identify observable lags or helpful time-shifts in the data. An informed user can then identify useful correlations to detect new process/system influences and causes.


Contact Information:Michael TayRockwell Automation+1 512 438 [email protected], TX, United States



FactoryTalk® Analytics™ DataFlowML Version 2.1

Benefits:• Identify data trends and present insights proactively• Correct anomalies before downtime or quality events occur• Use machine learning to help reduce human effort

Features:• Build data transformation and analysis pipelines• Execute machine learning model• Scalable and distributed architecture• Reuse model across FactoryTalk® analytics stack• Close the loop with your control system

New:• Simplified pipeline building based on structured streaming• Support for Python-based machine learning• Auto detection of schema in incoming data stream• Ability to inspect the behavior/logic of components during

pipeline creation• Jupyter interface for building models

Description:FactoryTalk® Analytics DataFlowML helps remove inconsistencies in the decision-making process to improve your overall bottom line. The latest release of FactoryTalk® Analytics DataFlowML provides auto inspection, schema detection and extensive machine learning model building and management capabilities for faster and easier decision-making.

Built for both real-time and batch data, FactoryTalk® Analytics DataFlowML eases data pipeline building and execution. It provides capabilities such as continuous model retraining, alert generation, monitoring and dashboards.


Contact Information:Kelly MacaulayRockwell Automation+1 440 646 [email protected] Heights, OH, United States



FactoryTalk® Analytics™ DataView Version 2.1

Benefits:• Get faster insights through self-service, intuitive storyboards you can

create with one click• Track machine, line, shop and plant KPIs with alerts• Easily find answers hidden in application and system silos• Use natural search language to query and diagnose and resolve issues

on the fly

Features:• Self-service data analytics on industrial data• Ingest data from streaming and relational data source • Predictive Fit Functions (forecasting, k means, decision tree and more)• Data annotation and mashup• Collaboration (share, schedule, embed, alert) • Browser User Interface (HTML5)

New:• Data ingress from Historian and FactoryTalk® Live Data• Support storyboard with direct query on RDMS sources• Linux platform support• NLP, data annotation, diagnostics and other enhancements

Description:Knowing what is happening on your shop floor is important. Examining it with the right context and analyzing it yourself in minutes can make a difference. FactoryTalk® Analytics™ DataView empowers you with faster insights through self-service, and intuitive storyboards you can create with one click. It enables rapid horizontal data integration, enterprise-level security, performance, and scalability combined with strong manageability in a collaborative and mobile environment.

The latest release increases visibility, improves productivity and enhances efficiency by providing quick insights to your line, shop floor, plant, and enterprise. It does not matter whether data comes from one system or from multiple disparate systems like PLC, DCS, Historians, MES and Enterprise applications. Through a simple self-service four-step process, you can annotate data, add context, mash it with other data and generate storyboards to get insights immediately.





FactoryTalk® Analytics™ Edge Version 2.2

Benefits:• Make rapid decisions as close as possible to the device, data,

and consumer• Increase efficiency of manufacturing analytics • Reduce information-layer infrastructure costs• Improve access to information by vastly reducing deployment

time

Features:• Ability to access data from your smart devices• Execute closed-loop machine learning at the edge• Pre-process data for optimal data flow and effective analytics• Build once, reuse and deploy everywhere• Low footprint, visual pipeline driven and built-in user

management

NEW:• Integrate your existing Python- and H2O-based machine

learning prediction models • Write-back to PLC right at the edge, allowing near-real time,

zero-touch control of machine settings• Updated platform user interface and pre-packaged data

processing blocks for faster development and deployment

Description:To improve decision-making, you need to gather insights as closely as possible to devices, data, and thosewho consume them. That is when the smallest of decisions make the biggest impact on process, time and material management. FactoryTalk® Analytics™ Edge provides data capture, transformation and analytical capabilities, including predictive machine learning, right on the edge. Quickly assemble and organize your plant-floor data for analysis. Locate and correct sources of inefficiencies quickly to control manufacturing yield, overall equipment effectiveness, and other factors that matter to your business outcome.





FactoryTalk® Analytics™ Real-Time Optimization


• Minimize energy costs and consumption across centralized utility centers with a prescriptive analytic

• Reduce energy up to 30%

• Maintain adequate utility (steam, chilled water, refrigerant, water, air & electricity) throughout your operations

• Reduce equipment maintenance

Description: FactoryTalk® Analytics™ Real-Time Optimization (RTO) software enables process operators to consider cost to drive optimal utility equipment dispatch to support intelligent make/buy, generation, and loading decisions. Energy savings on the order of 10-30% are typical from dispatch optimization on parallel centralized utility equipment. RTO provides predictive optimization by modeling process behavior and applying automatic control based on defined variables and constraints within the system. Based on actual operating data, the RTO application understands the relationships between equipment selection, loading and energy costs and self-maintains mathematical algorithms to predict accurate outcomes before actual events.





FactoryTalk® Brew™


• Standard, modular application designed for brewhouse control, leveraging standard process libraries with integration of brewing requirements.

• Agile configurations to adapt to your changing demands and materials to help you control costs.

• Data-driven reporting and trends improve ability to drive batch consistency, improve overall yield and have confidence in product safety.

• Simple navigation, intuitive graphics and information with context allows operators to learn and leverage the system.

• Modern interfaces, workflows and accessibility enable your team to focus on brewing instead of system navigating.

• Designed with a defense in depth approach to reduce the risk of access to your critical assets and information.

Description:As a larger brewer, you are dedicated to produce a quality product, and look for opportunities to drive outinefficiencies from your operations. The modular FactoryTalk® Brew™ Solution is designed to lower projectexecution time, reduce risk and improve ROI. It can help you to connect systems and provides actionableinformation, across multiple sites.

This connectivity allows you to:• Access real-time data on the brewing process• Compare performance across plants• Manage energy consumption at the enterprise level• Scale production up or down quickly

Available for Sale: June 11, 2018

Contact Information:Greg HoodRockwell Automation+1 440 646 [email protected], OH, United States



FactoryTalk® Craft Brew

Features and Benefits: • Designed to provide affordable solution for craft brewers,

typically from 5 BBL to 100 BBL

• Standard-based and scalable application for Brewhouse and Cellar

• Recipe management and temperature control drive quality and consistency throughout a craft lifecycle

• Standardized craft brewery solution optimizes uptime and efficiency while keeping costs low

• Helps reduce risk and prevent uncertainties

• Easily integrates equipment such as mash tuns, lauter tuns, brew kettles, whirlpools and combination units

Description:Your customers value the intricate aspects of your brews. With each pour, they look forward to theconsistency, taste and aromas that gained their loyalty. So, how do you maintain taste and color, and still beable to innovate and grow with demand? Simple. Know where automation can add value so you have moretime to focus on your art.

FactoryTalk® Craft Brew solution increases brew house control accuracy at each step of the process for morebrews per day. Productivity is boosted by reducing manual tending of batch sequencing and recipeadjustments. Easy to use and intuitive operator interfaces prompt operators through automated sequencesand manual interactions. And, our controller-based architecture reduces system complexity, integration costs,training and maintenance.


Contact Information:Greg HoodRockwell Automation+1 440 646 [email protected], OH, United States



FactoryTalk® Historian SE Version 6.0


• Enable full use of the collected data by using the various capabilities to calculate and aggregate the data collected from multiple data sources

• Reduce variability by verifying production parameters versus targets/norms

• Reduce deployment of new systems by using automatic discovery mechanisms to get new equipment data collection configured fast

NEW:• A complete, plant-wide Historian solution with connectivity

to both Rockwell Automation® and third-party devices simultaneously

• Statistical Quality Control (SQC) tests to determine if the value of an Asset attribute lies within user-specified margins of error

• Updated PI Server Components – PI Notifications 2017 R2

• Updated Platform Support Options

Description:Real-time access to reliable information is the key to improving productivity and efficiency. When you know what’s happening on the plant floor, you can make better decisions—about process, time and material management. The expanded capabilities of FactoryTalk® Historian SE provide you with the data capture, management and analytical capabilities for improved decision-making.

Built for robust data storage (>10M) while providing fast data retrieval, FactoryTalk® Historian SE v6.0 provides insight into performance parameters from one subassembly, to a production line, and across the enterprise.

FactoryTalk® Historian SE v6.0 helps locate and correct sources of inefficiencies quickly. This helps you manage manufacturing consistency, energy use, first-pass quality, and other factors that can improve the bottom line.

Available for Sale: August 1, 2018

Contact Information:Karen DychesRockwell Automation+1 949 521 [email protected] Ranch, CA, United States



FactoryTalk® Quality Management Version 4.2


• Evaluate quality using custom SPC rules

• Define quality limits at runtime

• Execute client software on mobile devices with small display sizes

• Get immediate feedback via a visual indication of item failure

• Greater clarity and reduced risk of errors through improved filtering of sample plans

Description: Today, manufacturers rely on a myriad of quality management software programs and paper-based processesto achieve consistent production quality. The FactoryTalk® Quality Management application is an out-of-box,comprehensive quality management solution that allows manufacturers to model and enforce their plants’ in-process quality regimens easily.

With this solution, manufacturers can remove disparate systems and antiquated paper processes to helpreduce the cost of quality compliance. The ability to run as a true thin-client application further reduces thecost and complexity of the quality system.


Contact Information:Kelly MacaulayRockwell Automation+1 440 646 6576 [email protected] Heights, OH, United States



FactoryTalk® Warehouse Management Version 4.0


• Seamless integration with PharmaSuite® greatly simplifies handing material to production and accepting product into the warehouse

• Logistic units (LUs) categorized to delineate the scope of responsibility of MES and Warehouse Management• Transport-only LUs may only be moved by the Warehouse

and for LoadCheck LUs Warehouse requests a load approval from MES equipment management

• Mitigate the need to relabel inventory labeled by other systems with barcode support of any barcode pattern by configuration

• Support for transport orders enables planning and prioritizing warehouse operations

• Enhanced responsive design UI more effectively displays table data on mobile clients with small displays

Description: FactoryTalk® Warehouse Management provides the capability to control logistical processes and operations in a warehouse. It provides full inventory transparency and permits increasing warehouse efficiency by: Reducing the material handling steps Reducing material logistics errors Controlling inventory more tightly Improving inventory accuracy Tracking inventory

It includes functionality to support goods receipt, storage, commissioning, de-commissioning, planning material movements and executing movements internally and for goods issue.

Available for Sale: February 1, 2019




Pavilion8® Version 5.16


• Integrated Preprocessing in SolutionBuilder

• Console Performance Monitoring

• Security update

Description:Pavilion8® Model Predictive Control version 5.16 is the latest release of the Rockwell Automation® advancedprocess control solution that includes the next major migration of legacy tools into a modern Windows userexperience. Dataset preprocessing to merge, clean up, enrich and prepare for modeling, a major part of theoriginal Pavilion technology platform, is now integrated with the already migrated MPC and Software CEM®tools into one platform with a common UI, SolutionBuilder. A new toolset to support, track and enhanceConsole reliability is an independent performance monitoring application. Track and identify the major systemresource consumers and isolate issues by trends and averages of usage. System security was improved withrelease version 5.15, but we remain on a planned path of enhancements, because software security is a highpriority with our customers and Rockwell Automation. Pavilion8® version 5.16 is the best-in-class securesoftware for model predictive control and environmental solutions.

Available for Sale: January 30, 2019




Performance Management Version 4.2



• React to automation outages by switching machines to manual mode for data entry

• Greater clarity and reduced event editing time using reason code sorting and filtering

• Host the application in a data center in a private cloud

• Collect data from multiple sites in multiple time zones and locales

Description: FactoryTalk® Performance is a scalable solution. It helps manufacturers to improve efficiency with an automated system that measures and analyzes data continuously to determine key corrective actions required to minimize the factors that reduce OEE. These include downtime, unproductive time, cycle time and scrap. The application pinpoints which corrective actions have the most impact, again and again over time.





PharmaSuite® Version 9.1

New Features and Benefits:

• Seamless integration with the FactoryTalk® Warehouse Management: MES can identify complete logistic units with all sublots and create and load logistical units, simplifying the handover between material logistics and production

• Added phases allow sending of- and waiting for- sync events, capability to count executed operations, and larger blocks of tags and type support on DCS interfacing

• Equipment states expire automatically to improve the overview

• Enhanced filtering and sorting of orders and workflows

• Improved review of large orders and workflows D

• Drastically reduced production downtime during system migration due to differential migration

Description: Rockwell Software® PharmaSuite® brings an innovative approach to MES. Role-based optimization of each stage of the recipe lifecycle drives time to results for every user. Open-content architecture paired with an intelligent upgrade engine provides manufacturers with a powerful system designed for growth in both batch and discrete processing.





PlantPAx® System Release

Description:The latest system release contains added key benefits to help ease ownership, improve delivery, and drive productivity. The system allows for a smarter, more productive and secure enterprise. Delivery teams are now able to adopt smart system capabilities with enhanced configuration and operations. The intuitive design features and overall user experience allow for increased productivity. Adoption of commonly used industry accepted standards align with enterprise policies of many process customers, which leads to a more secure infrastructure.

Some of the features highlighted in this release include an update of the Rockwell Automation Library of Process Objects, which includes new power & IEC61850 device libraries. Other features include enterprise-ready architectures for multi-system/multi-site, cloud based remote access, single server for small systems, and guidance for IEC 62443 adoption. The PlantPAx® system helps you make better, faster decisions by enabling you to respond more quickly to the demands of the customer and fast-changing specifications.


Contact Information:Tim SchmidtRockwell Automation +1 414 316 [email protected], WI, United States



Production Management Version 4.1


• Expanded number of widgets includes ECO, standalone units, repair, split and merge, lot flow, and more


• Use plant capacity fully with asynchronous dispatching of orders

• Improved reporting capability in the form of printable travelers and the creation of Device History Records (DHR)

Description:FactoryTalk® Production is a scalable solution that helps manufacturers to achieve balance with an automatedmethod of managing orders for discrete applications in complex environments. Integrated with ERP and builton a common modular framework, the application tracks order data and recipe parameters necessary forproduction to support end-to end production management and enable continuous improvement.





PTC ThingWorx


• Data Connectivity – access live data, transactional and time series to unify all information from device to enterprise

• Computation – perform calculations on the data

• Analytics – leveraging the Analytics engine

• Unified Production Model Development – organize to meet customer needs

• Visualization – data shared and fused from different data sources in context on a “single pane of glass”

• Configure and Extend – via APIs and configurations

Description: The ThingWorx platform offers all capabilities that are needed to build and extract value from smart,connected operations. With rapid development tools and support for on-premise or cloud deployments, theThingWorx platform is the best IoT choice for companies serious about industrial innovation.

ThingWorx capabilities to connect to any number of industrial and enterprise data sources combined with thescalable MES, Analytics and Machine Learning capabilities from Rockwell Automation provide a complete IIoTsolution for the industry.


Contact Information:Karen DychesRockwell Automation +1 949 521 [email protected] Ranch, CA United States



PTC Vuforia


• Improve workforce productivity, efficiency and customer satisfaction with real time, step-by-step work instructions

• Increase knowledge transfer faster through training with augmented reality

• Accelerate on-the-job training for new hires through interactive, 3D experiences

• Capture workforce expertise before knowledgebase retires or leaves

Description: As a large portion of the workforce approaches retirement (25% of Americans by 2020), it is essential fororganizations to create a strategy for capturing their expertise so it can be effectively communicated to thenext generation. Vuforia’s augmented reality can help to facilitate this knowledge transfer with easy-to-deploysolutions that are closing the expertise gap.

Vuforia is also an effective tool for improving workforce productivity by delivering step-by-step workinstructions for assembly, maintenance, operations and so much more. You can see many examples of theways Vuforia can be used with Rockwell Automation® solutions to improve productivity and increaseefficiency across the show floor.


Contact Information:Paul WhitneyRockwell Automation +1 414 382 [email protected], WI, United States

Learn more! Visit the The Connected Enterprise Industries Pavilion (#419), Integrated Architecture® (#1225),Innovations (#1757), Intelligent Packaged Power (#713) and Smart Devices (#801) Exhibits at the 2018 Automation Fair® event.


Onyx-M Optical Temperature Pyrometer


• Provide precision temperature measurement for demanding industrial applications including glass and specialty materials, such as plastics and powders

• Improve product quality by precisely controlling temperatures that affect critical material properties

• Standard Wavelengths: 3.4, 3.9, 5.1, 7.9, 8 to 14 μm

• Temperature Range: -30 to 1650°C (-22 to 3002°F) based on selected wavelength

• Easy integration to a PLC/PAC for closed-loop control of critical thermal processes using available Add-On Profile (AOP)

• Improve product quality, throughput, and enterprise risk management through more efficient and consistent thermal processes

• Typical Applications: glass process, thin-films, plastics, and non-metallic surfaces

Description: Advanced Energy’s Onyx-M is a single-channel, single-wavelength, non-contact infrared optical temperaturepyrometer that measures infrared energy being emitted from an object and converts this into temperature.The Onyx-M can be configured in a variety of measurement wavelengths based on target material, requiredprocess temperature range, and working distances. Optional accessories include a water-cooling jacket, air-purge shower to protect against lens contamination, and specialized mounting accessories.

Available for Sale: October 2018

Contact Information:Mark RitzheimerAdvanced Energy+1 800 446 9167 [email protected] Fort Collins, CO, United States

Learn more! Visit the Advanced Energy Exhibit (#1837) at the 2018 Automation Fair® event.


SRM8000 Adaptive Spectrum, FHSS High-Speed Modem


• Full, 1 watt power provides long-range transmission (35+ miles/ 56+ km)

• Adaptive learning minimizes interferences

• Advanced Technology enables RF speeds up to 4 Mbps

• Remotes can talk to remotes – peer-to-peer communication

• Packet compression allows greater speed

• Packet aggregation increases network efficiency

• CRC (cyclic redundancy check) and FEC (forward error correction) ensure reliability

• Selectable channels support flexible configuration

• Manual channel settings ensure highest performance

• 128 & 256 AES encryption provides maximum security

Description: DATA-LINC GROUP’s SRM8000, newest SRM long-range FHSS modem, utilizes Adaptive Spectrum Technology to obtain up to 4 Mbps RF speed in the 900 MHz license-free band and ranges up to 52+ km/35+ miles, with line-of-sight, farther with repeaters and/or high gain antennas while providing the reliability and noise-immunity industrial customers have come to expect.

To ensure data integrity, when the SRM8000 detects an error, it uses ARQ (Automation Repeat request) protocol that requests the data packet be resent. In conjunction with ARQ, in responding to the error, CRC (cyclic redundancy check) and FEC (Forward Error Correction) gives it the capability to error correct without needing the reverse channel to request data retransmission, ensuring correction and saving time. For short to long-range high-data-rate coverage, depend upon SRM8000 to get critical data through, even in bandwidth challenged, harsh industrial environments. LIVE DEMO Booth #307. For your critical data, THINK, DATA-LINC.


Contact Information:Karen PerlbachsDATA-LINC GROUP+1 425 882 [email protected], WA, United States

Learn more! Visit the DATA-LINC GROUP Exhibit (#307) at the 2018 Automation Fair® event.


Field Xpert SMT70 – Designed to Optimize Mobile Maintenance


• Ready-to-go out of the box – no software installation needed

• Faster commissioning and diagnosis with “one-click” automatic connectivity

• Wi-Fi, Bluetooth, LTE, GPS (optional)

• 11.6” sunlight readable mulit-touch HD display

• Windows 10 Pro operating system

• NAMUR NE 107 diagnosis

• Pre-installed device driver libraries for Endress+Hauserand third-party instruments

• Automatic online application software updates

• Battery life up to 7 hours (optional 14 hours)

• Durable design

Description: The Field Xpert SMT70 tablet PC for device configuration enables mobile plant asset management inhazardous and non-hazardous areas. It is suitable for commissioning and maintenance staff to manage fieldinstruments with a digital communication interface and to record progress. This tablet PC is designed as acomplete solution that comes with pre-installed driver libraries and is an easy-to-use, touch-enabled tool thatcan be used to manage field instruments during their entire life cycle.


Contact Information:Sara FiskEndress+Hauser+1 317 535 [email protected], IN, United States

Learn more! Visit the Endress+Hauser Exhibit (#607) at the 2018 Automation Fair® event.


Liquiline CM72 & CM82 Compact Transmitters


• Space-saving installation: The two-wire device fits inside an assembly and does not require its own power supply.

• Suitable for all locations: Whether your measuring point is exposed to dust, vapor, rain, snow, heat or cold.

• All the advantages of Memosens technology: Memosens sensors offer you the safest data transmission, the highest measured value availability and total ease of use.

• Easy operation: Use your existing tablets and smartphones for operation and commissioning of the CM82.

• Fast and reliable: A secure Bluetooth connection in the CM82 allows you to check measuring points that are dangerous or difficult to access from a safe distance.

Description: The Liquiline CM72 and CM82 are compact Memosens sensor-mounted transmitters that allow users to connect directly to the sensor and gain a 4–20 mA measurement value of pH, pH/ORP, conductivity or dissolved oxygen. Both devices are loop powered with a single 4–20 mA output. The CM72 is fixed for the sensor type, process variable and scaling. The CM82 is configurable using HART communications or an optional Bluetooth connection to a SmartBlue App. Using the SmartBlue App users can interface with the CM82 compact transmitter remotely for commissioning, operation, or diagnostics.





Memograph M RSG45 DIN Rail – Advanced Data Manager


• I/O channels can be ordered freely configured with HART® or universal inputs

• Advanced webserver/HART gateway functionality provides real-time data access from anywhere in the world (via internet access)

• Tamper-proof data storage/recording with FDA 21 CFR Part 11 conformity

• Multiple interfaces and fieldbuses are available including EtherNet/IP, PROFINET, and Modbus

• Integrated digital communication from the sensor level up to higher-level systems, ERP, cloud, etc.

• EtherNet/IP or PROFINET Gateway for new or legacy analog or HART capable instruments

• Secure Edge device enabling IIoT connectivity

Description: The DIN rail version was developed to meet the strong demand from the market for a smart compact DIN rail data manager for mounting in the control cabinet. It is perfectly suited for applications where there is no requirement for an onsite display. The compact device can serve as a data acquisition system for small process control applications. The RSG45 acquires up to 14 discrete and 20 universal/HART analog inputs from process sensors, records the data internally, performs math calculations and alarm checks, and transmits the data to a PC or any control system via Ethernet, RS232/485, Modbus, PROFIBUS DP or PROFINET digital communication links. Data can also be stored to a device plugged into the USB or the SD port.





New Possibilities on Endress.com


• Set up an account to shop for devices, spare parts and accessories

• View both online and offline transactions –all in one place

• Get easy access to technical information and documentation

• Buy online or request a quote from a sales representative

• Track the status of your quotes and orders

Description: The integration of a complete shopping experience into our website underlines our goal to help streamline your procurement processes and to improve your buying experience - both online and offline. This is much more than just a website redesign. A great deal of focus was placed on maximizing functionality and usability to create a comprehensive information and procurement platform. The website now connects you directly to Endress+Hauser and our expansive network of sales representatives.





HPS Titan® N Three Phase Encapsulated Transformer


• New Enclosure Design• Front Entry• Removable hinged doors• Textured powder coating• Both wall and floor mount on selected kVA’s

• Superior Performance• Lower inrush current• 10 kV BIL• T3C Classification with 95° C rise• Class 1, Division 2 & Class I, Zone 2 hazardous locations

Description: The improved HPS Titan® N three phase encapsulated transformer offers an innovative design andtechnological improvements for industrial and hazardous applications. Choose the Titan® N when ease ofinstallation, the environment, location and performance are key. The core & coil is completely encapsulated inepoxy and silica, providing excellent protection in the harshest applications such as: petrochemical plants;food processing facilities; oil & gas extraction and pipelines; as well as marine and shipboard installations.

Higher impedance designs lower inrush current, allowing the use of less costly protective devices. Optionalbreather drains ensure that any moisture build-up due to condensation is easily eliminated withoutcompromising Type 4/12 enclosure integrity.


Contact Information:Sanela LigataHammond Power Solutions +1 519 822 [email protected], ON, Canada

Learn more! Visit the Hammond Power Solutions Exhibit (#837) at the 2018 Automation Fair® event.


Littelfuse PSR High-Speed Semiconductor Fuses


• Best in Class DC performance

• Extremely current limiting

• Superior cycling capability

• Global certification cURus, CCC, IEC

• Direct bus-bar mount design

• Visual and optional microswitch fuse blown indication

• Low watt-loss design

• Compliance with US and Canadian requirements

• Class aR performance according to IEC60269-4

Description: Littelfuse PSR Series High-Speed Square Body Fuses are specially designed for protection of powersemiconductor devices such as diodes, triacs, IGBTs, SCRs, MOSFETs and other solid state devices that aretypically designed into power conversion and power conditioning equipment. Variable frequency drives,inverters, UPS, rectifiers and soft-starters are examples of typical equipment designed with sensitive powersemiconductor devices that cannot withstand any line surge or overcurrent conditions and require high-speedprotection. Littelfuse POWR-SPEED® PSR series products offer optimized circuit protection at the extremelyfast speed required to protect modern day power conversion devices. Such products are commonly found innumerous applications including pulp and paper industries, cranes and heavy-lifting equipment, processingindustries, wastewater treatment plants and various large factories and MRO facilities.

Available for Sale: May 2018

Contact Information:Immanuel UmeneiLittelfuse+1 773 628 [email protected], IL, United States

Learn more! Visit the Littelfuse Exhibit (#1811) at the 2018 Automation Fair® event.


4/4X Filter Fan Shrouds


• Easily remove shroud without tools for maintenance and filter replacement

• FDA-grade blue silicone gasket ensures a proper NEMA and UL rated seal to the enclosure

• Hinge design allows shroud to open to a 45 degree angle or to be completely removed for cleaning

• Pre-drilled holes allow for locking provision on side

• Easy one person installation with simple back panel mounting; hardware included

• 10 degree sloped-top to facilitate runoff of water and particulates

Description: The nVent HOFFMAN 4/4X Filter Fan Shroud is specially designed to help extend the life of electronics andmaintain high efficiency for open-loop cooling solutions in a variety of 4/4x environments. For advancedprotection and easier maintenance, the shroud features a hinged, tool-less design and easily attaches toHOFFMAN Type 12 Filter Fans to mitigate dust and water ingress, while only reducing airflow by 10 percent.

Available for Sale: August 2018

Contact Information:Emily DeLoziernVent HOFFMAN+1 763 422 [email protected], MN, United States

Learn more! Visit nVent HOFFMAN Exhibit (#848) at the 2018 Automation Fair® event.


HyShed Sanitary Washdown Enclosure


• Seamless FDA-grade silicone gasket eliminates the possibilityof water entry, resists bacteria growth and chemicalabsorption, and is easy to clean, maintain, install, and replace

• Sloped top is engineered to maximize back panel space while minimizing footprint and prevents fluids or particulates from pooling

• Crevice-free latch and screw surfaces reduce bacteria-harboring catch points and use standard tool to open

• Internally mounted hinges reduce bacteria-harboring catch points

• Solid back with no pre-tapped mounting holes for easy weld mounting

• Complete 304 stainless steel construction with #4 dairy finishprotects against corrosion, moisture entry and collection of particulates

Description:nVent HOFFMAN HyShed provides a total sanitary washdown enclosure solution, certified to NSF, 3A, andIP69K testing. Engineered especially for high pressure, high temperature sanitary washdown cleaningprocedures in Food & Beverage applications, HyShed helps wipe out bacteria-harboring catch points with itsstreamlined hygienic design, and virtually eliminates the possibility of moisture or chemical entry with itsFDA-grade silicone gasket, all while reducing maintenance-related costs and delays.


Contact Information:Dana MyersnVent HOFFMAN+1 763 203 3979 [email protected], MN, United States



ModCenter – Automated Modifications Using CAD Data


• Easy programming – DXF or DWG-based software allows for easy drawing import or drag-and-drop drawing creation

• Increase productivity – Automate the traditionally labor-intensive process of performing manual holes and cutouts

• Improve quality – Produce professional, repeatable holesand cutout

• Increase flexibility – Perform all necessary drilling, milling, tapping, circular milling, and engraving in various enclosurematerials including mild steel, stainless steel, aluminum, copper, non-metallic and more

Description:nVent HOFFMAN’s Steinhauer ModCenter eliminates the traditionally time-consuming and costly manualmethods of performing enclosure modifications and streamlines the way you work. Utilizing your existing CADdata, ModCenter produces fast and precise holes and cutouts – leading to faster build times and morecompetitive project bids.

Available for Sale: Now available

Contact Information:Rick MadaynVent HOFFMAN+1 763 422 [email protected], MN, United States



SpectraCool Remote Access Control


• Minimize Downtime – Identifying failure & addressing cooling alarms immediately minimizes downtime caused by component failure.

• Reduced Maintenance Costs – Keeping components running within optimal environmental conditions reduces the chance of failure and replacement.

• Increased Maintenance Efficiency – Eliminate manual functionality checks & thermal audits.

• Enhanced Control – Remotely adjust temperature settings for individual or groups of cooling system units.

• Increased Safety – Added mitigation of injury or incident by monitoring enclosure door sensor alarms.

• Immediate Detection – Instantaneous identification of alarms from cooling systems in all facilities.

• Promote Energy Efficiency – Minimize the requirement for cooling by adjusting to variation in ambient temperatures.

Description: nVent HOFFMAN’s SpectraCool Remote Access Control provides efficiency, productivity and cost savings forcooling systems through its remote monitoring and controlling capabilities. Designed to give access to all yourcooling devices in any location globally, it provides visibility and immediate alarm detection to help addressissues before any damage is caused to critical components. This eliminates the need for manual checks onelectrical equipment, which can be labor intensive and subject to human error and reduces the likelihood ofexposing critical components to high operating temperatures for extended periods of time. Preventing failuredue to heat further reduces the cost of replacing components. All of these factors combined help drive anefficient and intelligent manufacturing process. This technology gives you the peace of mind knowing thatsystems are running optimally, enclosure doors are secured, and that labor hours are not wasted recordinginformation manually.

Available for Sale: Now available

Contact Information:Ben TaylornVent HOFFMAN+1 763 218 [email protected], MN, United States



NEMA 12 Micro Data Center (MDC)


• NEMA 12 rate: Provides equipment inside of the enclosure protecting against the ingress of solid foreign objects and water

• Expansion-ready: Provides space for future increased network capacity without additions to the control room. A 42RU cabinet is provided which provides a growth factor between 30-50% to accommodate future expansion.

• Bonded structure: Incorporates single-point bonded cabinet, ground bar system, and ESD port to ensure network reliability. The pre-installed, D-rings and horizontal managers delivers optimal bend radius is delivered so that signal degradation is prevented.

• Integrated cable management with bend radius control: Maintains bandwidth throughout the network which provides increased network uptime

Description: The NEMA 12 pre-configured MDC is designed to support an industrial automation and control systems (IACS)that can be deployed within a manufacturing environment. The NEMA MDC allows rack and DIN mountequipment to be quickly and reliably deployed while protecting the critical physical media that makes up theindustrial network. The system includes network, grounding and bonding, and power infrastructure to supportintegrations of servers, switches, storage, network security, and other supporting devices in a completelogical-to-physical infrastructure solution design for high availability.

Available for Sale: December, 2018

Contact Information:Kelly McLeodPanduit Corp.708-532-1800 [email protected] Park, IL, United States

Learn more! Visit the Panduit Exhibit (#349) at the 2018 Automation Fair® event.


4-inch High InView Display


2706-P42C2-SC and 2706-P44C2-SC

• Full Color - Differentiate your messages using color

• Increased Brightness - 2x brighter, less power consumption than its predecessor

• Durable - NEMA 12 enclosure designed for the industrial environment

• Seamless Integration - Compatible with Rockwell Automation® controllers to deliver real-time information

• Global Support - Includes Rockwell Automation® TechConnect℠ support at no additional cost

Description: Now, communicate your productivity, status and alarm conditions on the brightest, most colorful and energy-efficient P4 InView displays. As a replacement for the tricolor model, you receive all the new features and benefits of the full-color model without paying more. Differentiate your messages using color, increase the visibility with improved brightness and ensure longevity with a NEMA rated enclosure. This 4-inch high display is available in widths of 36 inches or 72 inches and provides seamless integration with Rockwell Automation® controllers. Global support from Rockwell Automation® TechConnect℠ is also included at no additional cost.


Contact Information:Nick BeermanSpectrum Controls+1 425 468 [email protected], WA, United States

Learn more! Visit the Spectrum Controls Exhibit (#123) at the 2018 Automation Fair® event.


I/O Modules for the 2085 Micro850® Platform


• 2085-IF4XOF4-SC• Mixed Analog Inputs & Outputs• 16-Bit resolution• Available Now

• 2085-IR8-SC• 8 Channels of RTD• 16-Bit resolution• Available January 2019

• 2085-OV32-SC• 32 Channel 24v DC Sinking Outputs• Available January 2019

• 2085-OB32-SC:• 32 Channel 24v DC Sourcing Outputs• Available January 2019

• Free TechConnect℠ support from Rockwell Automation

Description: Spectrum Controls is proud to announce four new editions to the Micro850® platform. These new productsmaximize rack space without compromising performance. All of our modules include free TechConnect℠support from Rockwell Automation.

Available for Sale: Available now and January 2019




PowerFlex® 20-750-IF4XOF4-SC Combo Analog Input/Output Option Card


• The new PowerFlex® 750 Combo Analog Input/Output option card extends the functionality of your PowerFlex® drive by offering four configurable analog inputs and four configurable analog outputs

• 16-Bit Resolution

• Selectable frequency filters

• Easily configured using CCW software

• Low Power Consumption

• Free TechConnect℠ support from Rockwell Automation

Description: Spectrum Controls has partnered with Rockwell Automation to create another unique option card that adds remote I/O to the PowerFlex® 750 drive via the 20-750-IF4XOF4-SC option card. Our solution includes four analog inputs and outputs with 16-Bit resolution. Includes free TechConnect℠ support from Rockwell Automation.





Stratus ztC Edge Zero Touch Computing Platform


• Increased operational efficiency

• Reduced IT burden

• Lower downtime risk

• More deployment options

• Built in virtualization

• Automated protection

• Automated recovery

• Rugged, hot-swappable nodes

• System health monitoring and management

Description: ztC Edge is a versatile, fully integrated, self-protecting, industrial computing platform that helps resource constrained manufacturers increase operational efficiency, reduce IT burden, and lower downtimerisk. A pair of rugged nodes, with built-in virtualization, integrated redundancy, automated recovery, and cloud-based system health management services, ztC Edge delivers virtualized industrial IoT and control applications quickly and reliably.

To learn how ztC edge can fit into your automation control solution, download the newly released ztCCharacterization Report by ThinManager® – together ztC edge and ThinManager® can revolutionize how OEMs/end-users design, develop, operate and support their machine visualization.

Available for Sale: Available Now

Contact Information:Frank HillStratus Technologies+1 978 461 [email protected], M, United States

Learn more! Visit the Stratus Exhibit (#918) at the 2018 Automation Fair® event.


https://bit.ly/2DQTlp8

HGP with PQconnect: Harmonic Passive Filter with Remote Connectivity


• Smart Generator Compatibility

• Remote Access

• Filter Monitoring

• Contactor Controls

• Industrial Level Protection

• Failure Prediction

• Compliance Validation

• Troubleshooting and Analysis

• Multiple Communication Port Options

Description:TCI is excited to introduce the HGP with PQconnect!

The HGP filter is a drive-applied 5% passive harmonic filter. High quality components and a robust design allow this passive filter to deliver best in class performance under the harshest conditions and in the most challenging applications. The addition of a passive filter from TCI will reduce the current total harmonic distortion (iTHD) to 5%. The HGP filter is suitable for all industry applications.

The addition of PQconnect allows users to remotely monitor filter performance and diagnostics. The HGP with PQconnect is the first intelligent passive filter that monitors power quality and provides automatic contactor control based on line current or power factor.


Contact Information:Terry BrundageTCI, LLC+1 414 357 [email protected], WI, United States

Learn more! Visit the TCI Exhibit (#1037) at the 2018 Automation Fair® event.


Tripwire Enterprise with Tripwire Data Collector


• Secure Configuration Management: Ability to assess configurations of assets and harden.

• Policy Management: Assess assets and compare the configurations to best practices such as IEC 62443

• Vulnerability Assessments: Based on device configurations and firmware versions alert on vulnerable assets such as PLCs.

• Software Integrations: Integrate with PLC backup and configuration software such as FactoryTalk® AssetCentre to pull configuration data in via a ‘no touch’ approach and run policy and look for vulnerabilities on PLC assets.

• Native ICS protocol support: Allows the product to be able to speak native protocols such as EtherNet/IP, CIP, Modbus TCP, and DNP3.

Description: Tripwire Enterprise (TE) is a security configuration management (SCM) suite that provides integrated solutions for policy, file integrity and remediation. TE allows security, compliance, and operations teams rapidly achieve a foundational level of security by reducing the attack surface, increasing system integrity and delivering continuous compliance. Part of TE is the Tripwire Data Collector (TDC) is a software application that inventories your OT network assets then detects changes and identifies vulnerabilities on them. It harvests asset data using native industrial protocols, and integrations with intermediary software applications. TDC allows you to achieve complete visibility to immediately identify vulnerabilities and detect changes across your ICS environment, analyze for secure configurations, and run policy tests. It has the ability to communicate via various industrial protocols such as Modbus TCP, EtherNet/IP CIP, and SNMP v1–3.


Contact Information:Gabe AuthierTripwire+1 971 313 [email protected], OR, United States

Learn more! Visit the Tripwire Exhibit (#1413) at the 2018 Automation Fair® event.


Tripwire Log Center

Features and Benefits: • Normalization: Normalize logs from a variety of assets which

makes the logs human readable and easy to search

• Index logs: Index all of the logs coming in from a variety of asset types, making searching through the logs easy.

• Correlation rules: Correlate events allowing the customers to build in intelligence and gain insight into relationships between suspicious events.

• Dashboards: Out of the box dashboarding capability for easy view into an organizations vast array of logs.

• Integrations: Integration with a variety of ICS specific software vendors.

Description: Tripwire Log Center (TLC) supports a variety of data collection methods, including agentless collection via syslog, SNMP, WMI, file collectors and remote connectors for Cisco, Check Point and databases.Data collection is only part of the equation. TLC normalizes the log data it collects in order to make it accessible and useful with its product capabilities of indexing, search and correlation. TLC supports normalization rules for the wide array of products. Search and filter log data from multiple sources. Investigate operational outages. Correlate events with easy to build rules that identify events of interest. Gain insight into relationships between suspicious events, system changes, weak configurations, and vulnerabilities. TLC’s correlation engine automatically identifies and responds to events of interest using a logical flow of one or more conditions. Actions can include creating a work ticket, sending a notification email, or running a command.


Learn more! Visit the Tripwire Exhibit (#1413) at the 2018 Automation Fair® event.


Contact Information:Gabe AuthierTripwire+1 971 313 [email protected], OR, United States

Documents

October 2018 – Final Edition - Rockwell Automation...The ArmorView Plus 7 graphic terminal is a fully enclosed panel available in 12.1” size and features IP66 protection enabling