Upload
ngothien
View
222
Download
1
Embed Size (px)
Citation preview
Obturation Solution
DIAGNOSTIC
1ACCESS CAVITY
2GLIDE PATH
3SHAPING
4
The function of root canal filling is to obturate the canal and eliminate all portals of entry between periodontium and the root canal. It should provide an hermetic seal in order to:
• Prevent new infections
• Wall in potential remaining bacteria after shaping and irrigating
• Fill the remaining spaces to create a favourable biological environment for healing
Obturation / Root canal filling
OBTURATION
6CLEANING
5CORONAL RESTORATION
7
Root canal filling cannot compensate for poor shaping and / or incomplete disinfection.
Lateral compaction (cold)
1. Select the master cone of gutta-percha based on the largest file used, and the corresponding sized finger spreader
2. Coat canal walls and the master cone with sealer before sliding the master cone to working length (drawing 1)
3. Place the spreader into the canal alongside the master cone, then compact laterally under vertical pressure (not by pushing sideways) (drawing 2)
4. Remove the spreader
5. Place an auxiliary cone in the canal, compact with the finger spreader (drawing 3)
6. Repeat the previous step as long as you can fit an auxiliary cone
7. Cut the cones at the coronal part using a heated carrier (drawing 4)
Single cone (cold)
1. Select the gutta-percha master cone corresponding to the size of the last file used
2. Coat the root canal and the gutta-percha cone with sealer
3. Insert the gutta-percha cone into the apex of root canal
4. Cut the cone at the coronal part using a heated carrier
Techniques: summary and protocol
THE TECHNIQUE MOSTLY LEARNT AT SCHOOL
THE FASTEST, THE CHEAPEST, YET THE MOST CHALLENGED QUALITY
1
3
2
4
4
Warm vertical compaction (manual / warm)
1. Select a gutta-percha cone corresponding to the last file used, and adjust it 1-2mm back from the apex
2. Prepare three sizes of manual pluggers and heat carriers (small, medium, large)
3. Irrigate and dry the canal. Coat the gutta-percha cone with a small amount of sealer
4. Insert the master cone into the canal and cut the coronal end with the large heat carrier
5. Heat the gutta-percha cone in the canal with the large heat carrier Take away the upper part of gutta-percha by pulling out the carrier Compact the gutta-percha cone with the large plugger Repeat the same steps with the medium and the small heat carriers and pluggers, ensuring the apical 3-4 mm segment of the canal is filled
✓ This step is called the down-pack (drawings 1 and 2)
6. Coat the coronal part of the canal with sealer and backfill, heating small segments of a gutta-percha cone and condensing them with the large plugger (by waves)
✓ This step is called the backfill (drawings 3 and 4)
Warm vertical compaction with the CALAMUS® (mechanised / warm)
1. The downpack part of this obturation procedure is similar to the manual vertical compaction but executed with the CALAMUS electronical heat carriers and pluggers
2. The backfill: • The backfill hand piece contains a cartridge of gutta-percha which, when heated, is
injected into the canal using the easy-touch activation
• Use it to fill the middle third in a continuous wave (drawing 1 & 2)
• Compact the gutta-percha with a manual plugger (drawing 3)
• If needed, repeat to fill the coronal third in a continuous wave
Continuous Wave: The remaining portion of the root canal (middle and coronal thirds) is filled with heated gutta-percha in one single step.
Techniques: summary and protocol
CONTROLLABLE AND TRIDIMENSIONAL OBTURATION
1
3
2
4
backfill
backfill
down-pack
flows in to secondary
canal
1 2 3
5
Techniques: summary and protocol
Thermoplastified condensation (warm)
1. A gutta-percha cone coated with sealer is placed into the root canal
2. Select the appropriate gutta-condensor (with the needed length and diameter); place it on your motor, and into the canal (drawing 1)
3. The gutta-condensor is engaged, at a speed of 8000 t/m in the canal (drawing 2)
4. It will frictionally warm, plasticise and compact the gutta-percha in the root canal (drawing 3)
FOR THE INITIATED DENTIST
Carrier-based technique (warm)
1. Verify the apical diameter with a size verifier. If you feel “tug-back”, it’s the correct size. Insertion occurs in one action with very little opportunity to revise the result if the carrier does not go to length, therefore this is an important step (drawing 1)
2. Select the carrier-based obturator, corresponding to the size of the last shaping file used (confirmed by the size verifier)
3. Coat the canal with a thin layer of sealer. Remove excess sealer with a paper point
4. Heat the obturator as per DFU’s instructions
5. Insert the obturator in one single smooth motion into the root canal until it is snug (drawing 2)
6. Cut the handle with a bur
QUICK AND EASY TO LEARN – CONVENIENT FOR ALL CANALS, ESPECIALLY LONG AND CURVED ONES
2
1 2 3
1
6
Gutta-Percha cones 8
CALAMUS® Dual 9
Obturators 10
THERMAFIL®
THERMAPREP® 2 OVEN
GUTTACORE®
SYSTEM BASED SOLUTIONS
WAVEONE® GOLD 14
Paper points
Gutta-percha points
THERMAFIL® obturators
WAVEONE® 16
Paper points
Gutta-percha points
THERMAFIL® obturators
PROTAPER NEXT® 18
Paper points
Gutta-percha points
THERMAFIL® obturators
PROTAPER® UNIVERSAL 20
Paper points
Gutta-percha points
THERMAFIL® obturators
Sealers and cements 22
TOPSEAL®
PROROOT® MTA
Accessories & other instruments 24
Paper points
Gutta condensor
LENTULO®
Plugger and spreaders
MTA carriers
Thermacut
Kits 26
SUMMARY
Techniques: summary and protocol
Gutta-percha cones
For warm and cold obturations
Gutta-percha cones for warm or cold techniques:
• Reliable insertion to the apex
• 2%, 4%, 6% tapers and white versions available
• ISO colour coded
Code Description Ø ISO
A 022C .02 monochrome pink gutta-percha points 010 to 140
A 022E .02 monochrome white gutta-percha points 010 to 140
A 022G .02 colour coded gutta-percha points 010 to 140
A 022M .04 colour coded gutta-percha points 015 to 090
A 022N .06 colour coded gutta-percha points 015 to 090
A 022L Auxiliary gutta-percha points available in sizes XXF to L
A 022F Auxiliary gutta-percha points available in sizes A to D Matching Maillefer finger Spreaders
29/30mm
8
Mechanised vertical condensation
Filling has never been so easy!
• Hermetic 3D Fill: long-lasting, tightly sealed obturation of main and lateral canals
• Reliable: minimal risk of root fractures
• Easy to use device: clear display and adaptable settings
• Convenience and control: Feather-touch activation by flexible silicone ring. Good visualisation thanks to slim handpiece
Downpack procedure
• Handpiece with heat-carrier and plugger, available in various sizes
• Heating and cooling with the «click-on» feature
• Handpiece can be used for downpacking and searing of gutta-percha
Backfill procedure
• Temperature and flow rate can be set individually
• Micromotor controls a precise release of gutta-percha
• Cartridges can be quickly changed by the drop-in/drop-out design – easy to use and to dispose of, with minimal cleaning
• Flexible and extra-long, heat-conductive silver alloy cannulas also suitable for curved root canals
• One cartridge fills approximately 4-6 canals
Code Description Ø ISOA 1110 CALAMUS® plugger small 040 – taper .03A 1120 CALAMUS® plugger medium 050 – taper .05A 1130 CALAMUS® plugger large 060 – taper .06A 1150 CALAMUS® thermal response tip
A 1206 CALAMUS® replacement cartridge nut
A 1207 CALAMUS® cartridge needle bending tool
A 1208 CALAMUS® hand piece cleaning brush
A 1209 CALAMUS® hand piece heat shield
A 1210 CALAMUS® gutta-percha cartridge 20g – 10 pieces
A 1220 CALAMUS® gutta-percha cartridge 23g – 10 pieces
A 1300 CALAMUS® Dual kit
9
Obturators
Easy and fast 3D obturation with carrier-based technique
The combined action of the heated gutta-percha and the flexible plastic carrier achieves filling of the canal and lateral ramifications
• 3-dimensional obturation
• Recommended for long, narrow and curved canals
• Optimal use with THERMAPREP® 2 OVEN
25 mm
Code Description Quantity
A 0166 THERMAFIL® obturators Ø ISO 020 to 140 Box of 6
A 0348 THERMAFIL® obturators Ø ISO 020 to 040 Box of 30
A 0167 THERMAFIL® obturators kit - assortment Ø ISO 020 to 040 Box of 20
A 0168 THERMAFIL® anterior kit - assortment Ø ISO 045 to 100 Box of 20
10
Compatible with THERMAFIL® and GUTTACORE® obturators
• 3-dimensional heat
• Obturators ready in less than 1 minute (use the first level of heating for GUTTACORE®)
• Indicator lights and audible alerts (bips)
• After the bip, obturators are kept at the right temperature during 90 seconds
• Cleaning mode
• No pre-heating time
2 year guarantee and repair
Code Description
Included with the oven Cleaning brush
Included with the oven Additional faceplate stickers
A 0176 230 002 00 THERMAPREP® 2 OVEN 230V – EU plug
A 0176 115 002 00 THERMAPREP® 2 OVEN 115V
OVEN
11
Obturators
Transforming gutta-percha from the inside out
GUTTACORE® is the first obturator with a crosslinked gutta-percha core. Crosslinking is a well-established scientific process that connects the polymer chains and transforms the gutta-percha to make it stronger, while keeping its best features
* compared to cold lateral compaction** compared to THERMAFIL®
Verifier
Experience the difference of gutta-percha, through and through
1. Superior 3D fill*
• The hydraulic force sends warm gutta-percha flowing equally in 3 dimensions
• Centrally compacted gutta-percha creates predictable and consistent 3D fill that follows curves, finds accessory canals and flows into isthmuses
2. Ease of retreatment**
• No plastic core remaining in the root canal
• The obturator’s core comes out efficiently, saving you time and hassle
3. Post space simplified**
• Easy to create post space
• The drill engages and easily removes the obturation material
4. Optimal use with THERMAPREP® 2 OVEN
Crosslinked gutta-percha core obturator
• superior 3D fills
• ease of retreatment
• post space simplified
A 0175
045
090
020 030
060
050
035
070
040
080
x6
025
055
x1
x1
ISO 015-040
ISO 050-090
015
090
020
050
025
055
030
060
035
070
040
080
Non-sterile Plastic Box and Sterile Blister available
25 mm
12
BLISTER
Code Description Quantity
A 1703 B00 420 00 GUTTACORE® OBTURATORS Ø 020 Blister of 6
A 1703 B00 425 00 GUTTACORE® OBTURATORS Ø 025 Blister of 6
A 1703 B00 430 00 GUTTACORE® OBTURATORS Ø 030 Blister of 6
A 1703 B00 435 00 GUTTACORE® OBTURATORS Ø 035 Blister of 6
A 1703 B00 440 00 GUTTACORE® OBTURATORS Ø 040 Blister of 6
Code Description Quantity
A 1703 P00 420 00 GUTTACORE® OBTURATORS Ø 020 Pack of 30
A 1703 P00 425 00 GUTTACORE® OBTURATORS Ø 025 Pack of 30
A 1703 P00 430 00 GUTTACORE® OBTURATORS Ø 030 Pack of 30
A 1703 P00 435 00 GUTTACORE® OBTURATORS Ø 035 Pack of 30
A 1703 P00 440 00 GUTTACORE® OBTURATORS Ø 040 Pack of 30
PACK (5 BLISTERS)
13
WAVEONE® GOLD obturation
A file – a paper point, a gutta-percha point
WAVEONE® GOLD sterile paper points and gutta-percha cones match the size of the canal prepared with WAVEONE® GOLD files
• 4 sizes fit all canals prepared with WAVEONE® GOLD files
• Easily recognisable : identical colour coding for files, paper points and gutta-percha cones
• Paper points are packaged in individual sterile packs of 5 points. Easy to use, this packaging matches your average need for a canal treatment
Code Description Quantity
A 175X 000 00S 00 Gutta-percha points small Box of 60
A 175X 000 00P 00 Gutta-percha points primary Box of 60
A 175X 000 00M 00 Gutta-percha points medium Box of 60
A 175X 000 00L 00 Gutta-percha points large Box of 60
GUTTA-PERCHA POINTS
FROM THE SHAPING…
…TO THE OBTURATION OF YOUR CHOICE
Code Description Quantity
A 175W 000 00S 03 Sterile paper points small Box of 180
A 175W 000 00P 03 Sterile paper points primary Box of 180
A 175W 000 00M 03 Sterile paper points medium Box of 180
A 175W 000 00L 03 Sterile paper points large Box of 180
PAPER POINTS
14
A file – an obturator
The efficiency of THERMAFIL® applied to WAVEONE® GOLD obturators to match the size of the canal prepared with WAVEONE® GOLD files, letting you achieve rapid warm 3D filling
• Easily recognisable : identical colour for files and obturators
• Optimal fit in WAVEONE® GOLD prepared canals
Code Description Quantity
A 1750 B00 00S 00 THERMAFIL® for WAVEONE® GOLD small Blister of 6
A 1750 B00 00P 00 THERMAFIL® for WAVEONE® GOLD primary Blister of 6
A 1750 B00 00M 00 THERMAFIL® for WAVEONE® GOLD medium Blister of 6
A 1750 B00 00L 00 THERMAFIL® for WAVEONE® GOLD large Blister of 6
SYSTEM B
ASED
SOLUTIONS
Code Description Quantity
A 1750 P00 00S 00 THERMAFIL® for WAVEONE® GOLD small Pack of 30
A 1750 P00 00P 00 THERMAFIL® for WAVEONE® GOLD primary Pack of 30
A 1750 P00 00M 00 THERMAFIL® for WAVEONE® GOLD medium Pack of 30
A 1750 P00 00L 00 THERMAFIL® for WAVEONE® GOLD large Pack of 30
forPACK (5 BLISTERS)
forBLISTER
for
Optimal use with THERMAPREP® 2 OVEN15
WAVEONE® obturation
A file – a paper point, a gutta-percha point
WAVEONE® sterile paper points and gutta-percha cones match the size of the canal prepared with WAVEONE® files
• 3 sizes fit all canals prepared with WAVEONE® files
• Easily recognisable : identical colour coding for files, paper points and gutta-percha cones
• Paper points are packaged in individual sterile packs of 5 points. Easy to use, this packaging matches your average need for a canal treatment
® GUTTA-PERCHA POINTS
®
FROM THE SHAPING…
…TO THE OBTURATION OF YOUR CHOICE ® PAPER POINTS
Code Description Quantity
A 024X 000 00S 00 Gutta-percha points small Box of 60
A 024X 000 00P 00 Gutta-percha points primary Box of 60
A 024X 000 00L 00 Gutta-percha points large Box of 60
A 024X 000 900 00 Gutta-percha points assortment Box of 3x20
Code Description Quantity
A 024W 000 00S 01 Sterile paper points small Box of 180
A 024W 000 00P 01 Sterile paper points primary Box of 180
A 024W 000 00L 01 Sterile paper points large Box of 180
A 024W 000 900 01 Sterile paper points assortment Box of 3x60
16
A file – an obturator
WAVEONE® obturators match the size of the canal prepared with WAVEONE® files, letting you achieve rapid warm 3D filling
• Easily recognisable : identical colour for files and obturators
• Optimal fit in WAVEONE® prepared canals
® OBTURATORS
SYSTEM B
ASED
SOLUTIONS
® OBTURATORS
x6
x20Optimal use with THERMAPREP® 2 OVEN
Code Description Quantity
A 1700 000 10S 00 Obturators small Box of 6
A 1700 000 10P 00 Obturators primary Box of 6
A 1700 000 10L 00 Obturators large Box of 6
Code Description Quantity
A 1700 000 11S 00 Obturators small Box of 20
A 1700 000 11P 00 Obturators primary Box of 20
A 1700 000 11L 00 Obturators large Box of 20
17
PROTAPER NEXT® obturation
A file - a paper point, a gutta-percha point
PROTAPER NEXT® sterile paper points and gutta-percha cones match the size of the canal prepared with PROTAPER NEXT® files
• 4 sizes fit all canals prepared with PROTAPER NEXT® files
• Easily recognisable : identical colour coding for files, paper points and gutta-percha cones
• Paper points are packaged in individual sterile packs of 5 points. Easy to use, this packaging matches your average need for a canal treatment
PAPER POINTS
GUTTA-PERCHA POINTS
FROM THE SHAPING…
…TO THE OBTURATION OF YOUR CHOICE
Code Description Quantity
A 022Q 000 002 00 Sterile paper points X2 Box of 180
A 022Q 000 003 00 Sterile paper points X3 Box of 180
A 022Q 000 900 00 Sterile paper points assortment X2-X3 Box of 2x90
A 022Q 000 901 00 Sterile paper points assortment X4-X5 Box of 2x90
Code Description Quantity
A 022O 000 002 00 Gutta-percha points X2 Box of 60
A 022O 000 003 00 Gutta-percha points X3 Box of 60
A 022O 000 900 00 Gutta-percha points assortment X2-X3 Box of 2x30
A 022O 000 901 00 Gutta-percha points assortment X4-X5 Box of 2x30
18
SYSTEM B
ASED
SOLUTIONS
A file - an obturator
GUTTACORE® technology applied to PROTAPER NEXT® obturators to match the size of the canal prepared with PROTAPER NEXT® files, letting you achieve rapid warm 3D filling
• Easily recognisable : identical colour coding for files and obturators
• Optimal fit in PROTAPER NEXT® prepared canals
OBTURATORS BLISTER
for
Code Description Quantity
A 1803 P00 420 00 GUTTACORE® FOR PROTAPER® NEXT X2 Pack of 30
A 1803 P00 425 00 GUTTACORE® FOR PROTAPER® NEXT X3 Pack of 30
Code Description Quantity
A 1803 B00 420 00 GUTTACORE® FOR PROTAPER® NEXT X2 Blister of 6
A 1803 B00 425 00 GUTTACORE® FOR PROTAPER® NEXT X3 Blister of 6
Optimal use with THERMAPREP® 2 OVEN
for
OBTURATORS PACK (5 BLISTERS)for
19
PROTAPER® UNIVERSAL obturation
A file – a paper point, a gutta-percha point
PROTAPER® UNIVERSAL sterile paper points and gutta-percha cones match the size of the canal prepared with PROTAPER® UNIVERSAL files
• 5 sizes fit all canals prepared with PROTAPER® finishing files
• Easily recognisable : identical colour coding for finishing files, paper points and gutta-percha cones
• Paper points are packaged in individual sterile packs of 5 points. Easy to use, this packaging matches your average need for a canal treatment
PAPER POINTS
GUTTA-PERCHA POINTS
…TO THE OBTURATION OF YOUR CHOICE
FROM THE SHAPING…
Code Description Quantity
A 022X 000 101 00 Gutta-percha points F1 Box of 60
A 022X 000 102 00 Gutta-percha points F2 Box of 60
A 022X 000 103 00 Gutta-percha points F3 Box of 60
A 022X 000 901 00 Gutta-percha points assortment F1-F3 Box of 3x20
A 022X 000 902 00 Gutta-percha points assortment F4-F5 Box of 2x30
Code Description Quantity
A 022W 000 101 00 Sterile paper points F1 Box of 180
A 022W 000 102 00 Sterile paper points F2 Box of 180
A 022W 000 103 00 Sterile paper points F3 Box of 180
A 022W 000 901 00 Sterile paper points assortment F1-F3 Box of 3x60
A 022W 000 902 00 Sterile paper points assortment F4-F5 Box of 2x90
20
SYSTEM B
ASED
SOLUTIONS
A file – an obturator
PROTAPER® obturators match the apical taper of PROTAPER® UNIVERSAL finishing files, letting you achieve rapid warm 3D filling
• Easily recognisable : identical colour for finishing files and obturators
• Optimal fit in PROTAPER® prepared canals
OBTURATORS
OBTURATORS
Code Description Quantity
A 1411 000 101 00 PROTAPER® Obturator F1 Box of 6
A 1411 000 102 00 PROTAPER® Obturator F2 Box of 6
A 1411 000 103 00 PROTAPER® Obturator F3 Box of 6
A 1411 000 104 00 PROTAPER® Obturator F4 Box of 6
A 1411 000 105 00 PROTAPER® Obturator F5 Box of 6
Code Description Quantity
A 1411 000 111 00 PROTAPER® Obturator F1 Box of 20
A 1411 000 112 00 PROTAPER® Obturator F2 Box of 20
A 1411 000 113 00 PROTAPER® Obturator F3 Box of 20
A 1411 000 114 00 PROTAPER® Obturator F4 Box of 20
A 1411 000 115 00 PROTAPER® Obturator F5 Box of 20
Optimal use with THERMAPREP® 2 OVEN21
Sealers and cements
TOPSEAL®
• Epoxy resin based root canal sealer for final obturation of permanent teeth
• Biocompatible
• Reduces risk of postoperative inflammatory reaction or periapical chronical inflammation
• Easy introduction into the root canal
• Strong adhesion to the dentine walls
Code Description
A 0900 1 x Tube of paste A, 4 ml
1 x Tube of paste B, 4 ml
1 x Mixing Pad
22
PROROOT® MTA
PROROOT® MTA (Mineral Trioxide Aggregate) root repair material:
• Apical plug during apexification
• Repair of root perforations during root canal therapy
• Treating internal root resorption
• Root-end filling material
• Pulp-capping material
Pulp capping
Fureal repair
Root resorption
Repair of root perforation
Apexification
Root-end filling
Clinical Applications of PROROOT MTA®
The first name in root repair
• Trusted in over 4 million canals
• Strong seal that sets in moisture
Code Description
A 0405 4 x 0.5g
10 x 0.5g
23
Accessories and other instruments
Name Code Description
Paper Points
Sterile .02
0.02
0.04
0.06
A 022T
A 022R
A 022J
A 022K
A wide range of absorbent paper points for all warm or cold obturations • ISO colour-coded• Tapers .02, .04, and .06 available• ISO diameter 010 to 140 available (depending on taper)• Refills and assortments available• Pre-sterile available
Gutta Condensor
A 0242 Gutta condensor for Thermoplastified Condensation • Stainless steel instrument • Graduations marked on the shaft of the instrument
to indicate the penetration depth of the Gutta condensor
• ISO diameter 025 to 080 available • Exists also in sterile version
LENTULO®
Paste Carrier A 0022
A 002S
Spiral Fillers for mechanised placement of sealer
Spiral Fillers sterile for mechanised placement of sealer
Handy LENTULO®
A 022H Spiral Fillers for manual placement of sealer
24
Name Code Description
Heat-carrier Pluggers
Pluggers for manual warm vertical obturation
Dr Machtou
Prof. Schilder
A 281S
A 0400
A 0401
Exists in 4 different sizes : 1-1, 1-2, 2-3, 2-4
Pluggers anterior
Pluggers posterior
Spreaders A 0182 Finger spreaders manual for cold lateral compaction
Exists in 4 different sizes : A, B, C, D
MTA carriers A 0407
A 0408
Manual carrier to prepare and put in place the MTA
Surgical manual carrier
Verifiers A 0175 Allow you to verify the size of the canal in order to select the right obturator
The use of a verifier is highly recommend for the carrier-based technique
Exists in sterile version
Therma-cut A 0050 Therma-Cut bur to cut the THERMAFIL® carriers
Post Space bur A 0051 Post-Space bur, to create a post-space after the obturation is completed
25
Kits
Kit Code Description
CALAMUS® Dual kit A 1300 • 1 CALAMUS® Dual device• 1 plugger small ISO 40 – taper .03• 1 pack of 10 cartridges 20g• 1 pack of 10 cartridges 23g• 1 replacement cartridge nut• 1 cartridge needle bending tool• 1 handpiece cleaning brush• 1 handpiece heat shield• 1 remove power card
PROROOT® MTA kit A 0406 • 4 half-gram treatments of PROROOT® MTA material• 5 mixing spatulas• 4 MTA carriers (1 nonsurgical, 3 surgical)• 2 sets of tubes (4mm and 8mm)• 1 instructional CD• 1 mixing pad
26
Kit Code Description
GUTTACORE® obturation starter kit
A 1710 • 1 THERMAPREP®2 OVEN
• 4x GUTTACORE® obturator blister of 6 :
2 x 25
1 x 30
1 x 40
• 1 verifier assortment (020-045)
THERMAFIL® obturation starter kit
A 176A • 1 THERMAPREP®2 OVEN
• 1 THERMAFIL® posterior assortment (20 obturators)
• 1 THERMAFIL® verifier assortment (020-045)
WAVEONE® obturation starter kit
A 176B • 1 THERMAPREP®2 OVEN
• 3 WAVEONE® obturators box of 6 :
1 x small
1 x primary
1 x large
PROTAPER® UNIVERSAL obturation starter kit
A 176C • 1 THERMAPREP®2 OVEN
• 2 PROTAPER® UNIVERSAL obturators box of 6:
1 xF1
1 xF3
• 2 PROTAPER® UNIVERSAL obturators box of 20:
1 xF2
+ obturators of your choice
for
for ®
27
MAILLEFER INSTRUMENTS HOLDING S.À.R.L CHEMIN DU VERGER 3CH-1338 BALLAIGUESSWITZERLAND
www.dentsplymaillefer.com
PRODUCTS LEGAL MANUFACTURER
GUTTACORE®
ProRoot MTA®
Thermaprep® 2
DENTSPLY Tulsa Dental Specialties608 Rolling Hills Drive, Johnson CityTennessee, 37604, USA 0086
CALAMUS DUAL® ASEPTICO INC.8333 216th Street SE, Woodinville, Washington, 98072, USA 0086
TOPSEAL® DENTSPLY DeTrey GmbHDe-Trey-Strasse 178467 Konstanz, Germany 0123
All other productsMAILLEFER INSTRUMENTS HOLDING SàrlChemin du Verger 3CH-1338 BALLAIGUES, SWITZERLAND 0459
Tech
nica
l mod
ifica
tions
on
our p
rodu
cts ar
e no
t sub
ject
to n
otifica
tions
. Pho
tos of
our
inst
rum
ents
are
not
con
tract
ual. IN
L/F1
9 01 1
46.E
/00/2
015
– c
reat
ed 0
2/20
15