7/22/2019 o1600 (Calibration Ring Gage)

1/1

%O1600 (PROBE CALIBRATION RING GAGE)

(*** INDICATE THE EXACT CENTERLINE ***)(*** TO SET WORK OFFSET X/Y ZERO ***)

(*** SET Z ZERO TO TOP OF GAGE ***)(*** ENTER APPROX LENGTH OF PROBE IN TOOL OFFSET ***)

N100 M6 T30 (*** EDIT TOOL # ***)

N110 G91 G28 Z0.N120 G17 G80 G40

N130 G90 G54 G00 X1.125 Y0. (*** EDIT WORK OFFSET & X VALUE ***)N140 G43 H30 Z10. (*** EDIT H VALUE ***)

(*** EDIT T VALUE FOR PROBE LINE N160 ***)(*** EDIT D VALUE EXACT DIA OF RING GAGE N190 & N200 ***)

N150 G65 P9832 (PROBE ON)

N160 G65 P9810 Z0.2 F100. (CRASH PROTECT ON)N170 G65 P9801 Z0. T30 (LENGTH CAL)

N180 G65 P9810 X0. Y0.N190 G65 P9810 Z-.25

N200 G65 P9802 D2.0 (X/Y TRIGGER)N210 G65 P9804 D2.0 (BALL RADIUS)

N220 G65 P9810 Z10.N230 G91 G28 Z0.

N240 G65 P9833 (PROBE OFF)

M30

%