Nyhavn Maxi Wall - 100mileny.com100mileny.com/uploads/product/nyhavn-wall-maxi.pdfNyhavn Maxi Wall Design Alfred Homann The conical shade ensures comfortable light that is directed

Nyhavn Maxi Wall

Alfred HomannDesign

The conical shade ensures comfortable light that is directed downwards in a wide beam. The shade interior has a white matte painted surface, ensuring uniformlight distribution. The rings ensure that a stray light is controlled, and direct a small amount of light onto the top side of the shade for self-illumination.

Concept

Copper, brushed. Natural painted aluminum or white, powder coated.Finish

Shades: Spun aluminum or spun copper. Diffuser: Injection molded clear polycarbonate (MH), injection molded partly frosted polycarbonate (CMH) or injectionmolded white opal polycarbonate(CF). Rings: Die cast aluminum or copper plated, die cast red brass. Top: Die cast aluminum or copper plated, die cast red brass.Mounting plate: Die cast aluminum or copper plated, die cast red brass. Arm: Extruded aluminum or copper plated, extruded red brass.

Material

Surface: Mounted directly to a recessed ballast box provided (CMH/MH) or mounted directly to finished surface over a recessed 4” octagonal junction box (CF).Mounting

Max. 49 lbs.Weight

cULus, Wet location. IBEW.Label

Product Code

NYW-MAX

Light source

1/100W/MH/ED-17 medium

1/26W/32W/42W/CF GX24q-3/4

1/70W/CMH/T-6 G12

Voltage

120/208/240/277V

120-277V

Finish

COP

NAT PAINT ALU

WHT

Diff./Encl./Glass

CLEAR

OPAL

PARTLY FROSTED

Specification notes

a. CMH variant provided with a partly frosted diffuser.b. CF variant provided with an opal diffuser.c. MH variant provided with clear diffuser.d. CMH variant provided with a 120-277V ballast.e. CF variant provided with a120-277V ballast.f. MH variant provided with a 120/208/240/277V ballast.

Nyhavn Maxi Wall

NYW-MAX-1-MH PRODUCT SPECIFICATION

Product description

D e s i g n Alfred Homann

Concept The conical shade ensures comfortable light that is directed downwards in a wide beam. The shade interior has a white mattepainted surface, ensuring uniform light distribution. The rings ensure that a stray light is controlled, and direct a small amountof light onto the top side of the shade for self-illumination.

F i n i s h Copper, brushed. Natural painted aluminum or white, powder coated.

M a t e r i a l Shades: Spun aluminum or spun copper. Diffuser: Injection molded clear polycarbonate (MH), injection molded partly frostedpolycarbonate (CMH) or injection molded white opal polycarbonate(CF). Rings: Die cast aluminum or copper plated, die cast redbrass. Top: Die cast aluminum or copper plated, die cast red brass. Mounting plate: Die cast aluminum or copper plated, diecast red brass. Arm: Extruded aluminum or copper plated, extruded red brass.

Mount ing Surface: Mounted directly to a recessed ballast box provided (CMH/MH) or mounted directly to finished surface over a recessed4” octagonal junction box (CF).

W e i g h t Max. 49 lbs.

L a b e l cULus, Wet location. IBEW.

Product Code Light source Voltage Finish Diff./Encl./Glass

NYW-MAX 1/100W/MH/ED-17 medium 120/208/240/277V COP CLEAR

1/26W/32W/42W/CF GX24q-3/4 120-277V NAT PAINT ALU OPAL

1/70W/CMH/T-6 G12 WHT PARTLY FROSTED

S p e c i f i c a tio n n o t e s


1/3 yuLouis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com

Nyhavn Maxi Wall


Material description

2/3

Louis Poulsen Lighting | 3260 Meridian Parkway | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com

Nyhavn Maxi Wall


Light Measurements

3/3


Nyhavn Maxi Wall

NYW-MAX-1-70W-CMH PRODUCT SPECIFICATION

Product description















Nyhavn Maxi Wall



2/3


Nyhavn Maxi Wall


Light Measurements

3/3


Nyhavn Maxi Wall

NYW-MAX-1-42W-CF PRODUCT SPECIFICATION

Product description















Nyhavn Maxi Wall



2/3


Nyhavn Maxi Wall


Light Measurements

3/3


Louis Poulsen Lighting · 3260 Meridian Parkway · Fort Lauderdale, Florida · 33331 954-349-2525 · www.louispoulsen.com

3217

9-I

1

32.3”

22.1”

10.7

”

15.7

”

Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth.

Remove greasy spots etc. with a soft cloth dampened in lukewarm water(<122° F/ 50° C) with a mild detergent.

Warning:Scouring powder and similar substances will scratch surfaces.

All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor.

Light source Voltage Weight Electric shock protection Ingress protection

1/100W/MH/ED-17 medium 120/208/240/277V 49 Lbs Cl. I, grounded IP 44, Wet location1/70W/CHM/T-6 G12 120-277V 1/26W/32W/42W/CF GX24q-3/4

Nyhavn Wall Maxi

Design Alfred Homann

R e-lamping:

R emove the polycarbonate shade by loosening the screw. Do NOT remove screw !Turn and pull down the polycarbonate shade.R eplace the light source.R emount the enclosure and tighten the screw.

1

2

3

Use only light source in accordance to the lamp R eplacement label on the luminaire

Do NOT remove screw !

8.5"

8.5"8.5"

F or HID ins tallationOn R ecessed B allast box

S ee further mountinginstructions in the manualsupplied with theR ecessed B allast box

- G reen to G reen (ground)- White to White- B lack to B lack

For CF instalationOver a 4” junction box

S afety C able

S afety C able

R awplugsS crewsE xpansion bolts( Not provided )

4" Octagonaljunction box

T he installer mustseal the back ofthe wall flange to the wall with abead of s ilicone

T he installer must ensure to use proper means (rawplugs / screws / expans ion bolts ) to secure the fixture to the wall material. (Means not provided)T he installer must if necessary reinforce the wall s tructure by adequate means .

C onnect safety cable to theJ unction box(screw not provided)

L amp R eplac ement L abels

T his luminaire may have different light source options .

T he Installer must ensure that the lamp R eplacement Label on the luminaire represents the appropriate light source and control gear.

During ins tallation the ins taller mus t delete, with a permanent marker, the lamp wattages that do not apply.

32179-I1

Louis Poulsen Lighting · 3260 Meridian Parkway · Fort Lauderdale, Florida · 33331 954-349-2525 · www.louispoulsen.com

Recessed Ballast Box

1440035000

DISASSEMBLE FIXTURE. REMOVEBALLAST FROM CAST BALLASTBOX BY LOOSENING 2 SCREWSAND PASSING THROUGH KEYHOLESLOTS.

PREPARE WALL WITH A CUTOUTOF Ø10.38". THE LIP OF THEBALLAST BOX WILL REST ON THEWALL SURFACE.

MOUNT THE BALLAST BOX TO THEWALL BY DRILLING THROUGH THE3 INDENTS IN REAR OF BOX. THE"UP" ARROW MUST BE POSITIONEDCORRECTLY. ALTERNATIVELY, USETHE SIDE M5 SCREWS TO MOUNTBALLAST BOX TO BRACKETS (NOTINCLUDED).

RUN CONDUIT INTO BALLAST BOXBY USING THE 3/4" THREADED HOLESLOCATED ON THE 4 SIDES OF THEBALLAST BOX.

MAKE ELECTRICAL CONNECTIONS TOTHE BALLAST:

BLACK = LINE VOLTAGEWHITE = NEUTRALGREEN = GROUND.

CAUTION: THE FACTORY SETS THEBALLAST TO OPERATE AT 277V AC.CHANGE THE BALLAST WIRING IFANOTHER VOLTAGE IS TO BE USED.

MAKE ELECTRICAL CONNECTIONSFROM THE BALLAST TO THE FIXTURE.

ATTACH THE FIXTURE TO THE BALLASTBOX, ENSURING THAT THE GASKETSEALS THE JOINT BETWEEN FIXTUREAND BALLAST BOX.

FRONT VIEW OF BALLAST BOX

(3) INDENTS TO DRILLREAR MOUNTING HOLES

LIP Ø 10.7" x .25"

POSITION "UP" ARROW

BALLAST ASSEMBLY

REMOVABLE PLUGS

2 COUNTERSUNK HOLESWITH M5 THREADSARE ON EACH SIDE

HOLE CIRCLE Ø 5.91"AT 120˚

Documents

Nyhavn Maxi Wall - 100mileny.com100mileny.com/uploads/product/nyhavn-wall-maxi.pdfNyhavn Maxi Wall Design Alfred Homann The conical shade ensures comfortable light that is directed