Nycoil Catalog 11-13[b]nopakcanada.com/pdf/NYCOIL-FluidPowerProducts.pdf · Nycoil offers a specially formulated Nylon tubing with a 1/8" outside diameter and a 0.023" wall (500 PSI

Nycoil offers a specially formulated Nylon tubing with a 1/8" outside diameter and a 0.023" wall (500 PSIworking pressure) on 1000' reels that’s used for injection lube systems. This “capillary tubing” is in stock and can be ordered as Part Number 60218. Contact us for more information.

Capillary Tubing

1/8 0.080 6121– 6521– 6021– 0.023 0 = Natural1/8 0.093 6122– 6522– 6022– 0.016 1 = Black

5/32 0.106 6123– 6523– 6023– 0.025 2 = Red3/16 0.137 6133– 6533– 6033– 0.025 3 = Blue1/4 0.180 6144– 6544– 6044– 0.035 4 = Green1/4 0.125 6146– 6546– 6046– 0.062 5 = Yellow1/4 0.170 6147– 6547– 6047– 0.040 6 = Orange5/16 0.232 6155– 6555– 6055– 0.040 7 = Gray3/8 0.275 6166– 6566– 6066– 0.0501/2 0.375 6188– 6888–* 6088– 0.062

* Indicates 250' Reel· Adding a Color Code suffix to the part number is required. If no Color Code is selected,

Natural (0) color will be supplied.· Custom sizes, cut lengths, reel lengths and colors are available upon request–please consult the factory.· Please refer to pages 48 and 49 for Chemical Resistance information.· Please refer to pages 50 and 51 for tubing specifications.

Tube O.D. Tube I.D. 100' 500' 1000' Wall Thickness Color Codein in Slit Pac Reel Reel in Suffix Key

Tube O.D. Tube I.D. 100' 500' 1000' Wall Thickness Color Codemm mm Slit Pac Reel Reel mm Suffix Key

4 2.7 7104– 7404– 7704– 0.65 0 = Natural4 2 7102– 7402– 7702– 1 1 = Black5 3 7105– 7405– 7705– 1 2 = Red6 4 7106– 7406– 7706– 1 3 = Blue8 6 7108– 7408– 7708– 1 4 = Green10 8 7111– 7411– 7711– 110 7.5 7110– 7410– 7710– 1.2512 9.5 7112– 7412– 7712– 1.2514 12 7116– – – 1

· Adding a Color Code suffix to the part number is required. If no Color Code is selected, Natural (0) color will be supplied.

· Custom sizes, cut lengths, reel lengths and colors are available upon request–please consult the factory.· Please refer to pages 48 and 49 for Chemical Resistance information.· Please refer to pages 50 and 51 for tubing specifications.

757 South Avenue Fanwood, New Jersey 07023 908.322.6644 Fax: 908.322.9467 www.nycoil.com

Pneumatic Tubing

Nylon tubing is a popular choice for low pressure pneumaticapplications because of its combination of flexibility andtoughness. Nycoil uses a heat and light stabilized, veryflexible high grade Nylon 12 compound that yields the finestquality tubing available. Some of the qualities of tubingextruded from Nylon 12 raw material are good chemicalresistance, low water absorption and superior dimensionalstability. Nylon is the most recommended tubing material for all types of pneumatic circuits.

A circuit designer could never get into trouble using Nylontubing for pneumatic circuits. Due to its physical properties,Nylon is the number one choice for reliable connections with all types of fittings. Nylon retains its performanceintegrity in elevated temperatures and generally, because ofit’s higher pressure and temperature characteristics, Nylonwill have a greater flow passage than composite tubing made from other material with the same outside diameter.These factors should never be overlooked when designingpneumatic circuits.

Temperature Range: -40°F to +200°F (-40°C to +93°C)

Nylon

Temperature (deg. F)

Wor

king

Pre

ssur

e (P

SIG

)

68 100

100

0

200

300

400

500

600

700

125 150 175 200

4 x 2mm5mm4 x 2.7mm, 6 x 4mm10 x 7.5mm, 8mm10 x 8mm, 12 x 9.5mm14mm

Nylon Metric Tubing


Wor

king

Pre

ssur

e (P

SIG

)

68 100

150

250

350

550

0

650

450

125 150 175 200

1/4 x .125 ID1/8 x .080 ID1/4 x .170 ID5/32, 1/4 x .180 ID, 5/16, 3/81/8 x .093 ID, 3/16, 1/2

Nylon Fractional Inch Tubing

See page 8 for Nylon Air Brake Tubing (SAE J844).


1/8 0.08 7012– - 7002– 0.023 1 = Black5/32 0.076 7011– - 7001– 0.040 2 = Red3/16 0.117 7013– - 7003– 0.035 3 = Blue1/4 0.17 7014– - 7004– 0.040 4 = Green5/16 0.232 7015– 7005– - 0.040 5 = Yellow3/8 0.250 7016– 7006– - 0.062 6 = Orange1/2 0.375 7017– 7007– - 0.0625/8 0.440 - 7008–* - 0.0923/4 0.566 - 7009–* - 0.092


Black (1) color will be supplied.· Custom sizes, cut lengths, reel lengths and colors are available upon request–please consult the factory.· Please refer to pages 48 and 49 for Chemical Resistance information.· Please refer to pages 50 and 51 for tubing specifications.


4 2.5 7203– 7503– 7803– 0.75 0 = Natural6 4 7206– 7506– 7806– 1 1 = Black8 6 7208– 7508– 7808– 110 8 7211– 7511– 7811– 1

· Adding a Color Code suffix to the part number is required. If no Color Code is selected, Natural (0) color will be supplied.



1/4 0.170 6244– 6444– 6644– 0.040 0 = Natural 4 = Green5/16 0.190 6255– 6455– 6655– 0.062 1 = Black 5 = Yellow3/8 0.250 6266– 6466– 6666– 0.062 2 = Red 6 = Orange1/2 0.375 6288– 6988–* 6688– 0.062 3 = Blue 7 = Gray


Natural (0) color will be supplied.· Custom sizes, cut lengths, reel lengths and colors are available upon request–please consult the factory.· Please refer to pages 48 and 49 for Chemical Resistance information.· Please refer to pages 50 and 51 for tubing specifications.

57 South Avenue Fanwood, New Jersey 07023 908.322.6644 Fax: 908.322.9467 www.nycoil.com8

Pneumatic Tubing

Polyethylene is the most commonly used tubing due to its flexibility, wide range of chemical resistance and lower cost. Nycoil uses high quality Linear Low Density Polyethylene material(LLDPE) that conforms to Food and Drug Administration 21 CFR177.1520 C where contact with food is an issue (applies to all colors).LLDPE has a much higher resistance to stress cracking as compared to other Polyethylene compounds. It is also chemically inert,

meaning it forms a good barrier against moisture, vapors and gases – minimizing the possibility of leaks or contamination. Where prolonged exposure to sunlight or ultraviolet (UV) light is a concern, black tubing is recommended for extended life.


Polyethylene


Wor

king

Pre

ssur

e (P

SIG

)

68 100

50

0

100

150

200

250

125 150 175

5/16"1/4", 3/8"1/2"

Polyethylene Fractional Inch Tubing


Wor

king

Pre

ssur

e (P

SIG

)

68 100

50

0

100

150

200

250

125 150 175

4mm6mm8mm10mm

Polyethylene Metric Tubing

Nylon Air Brake Tubing (SAE J844)


Pneumatic Tubing


4 2.5 7303– 7603– 7903– 0.75 0 = Clear5 3 7305– 7605– 7905– 1 1 = Black6 4 7306– 7606– 7906– 1 2 = Red8 6 7308– 7608– 7908– 1 3 = Blue10 6.5 7310– 7610– 7910– 1.75 4 = Green12 9 7313– 7613– 7913– 1.5

· Adding a Color Code suffix to the part number is required. If no Color Code is selected, Clear (0) color will be supplied.


1/8 0.062 6322– 6722– 6622– 0.031 0 = Clear 7 = Gray5/32 0.093 6325– 6725– 6625– 0.031 1 = Black 9 = White3/16 0.107 6333– 6733– 6633– 0.040 2 = Red 12 = Transparent Red1/4 0.170 6344– 6744– 6645– 0.040 3 = Blue 13 = Transparent Blue1/4 0.125 6346– 6746– 6646– 0.062 4 = Green 14 = Transparent Green3/8 0.250 6366– 6766– 6667– 0.062 5 = Yellow 15 = Transparent Yellow1/2 0.320 6387– 6787–* 6687– 0.090 6 = Orange 16 = Transparent Orange


Clear (0) color will be supplied.· Custom sizes, cut lengths, reel lengths and colors are available upon request–please consult the factory.· Please refer to pages 48 and 49 for Chemical Resistance information.· Please refer to pages 50 and 51 for tubing specifications.

Although 95A Durometer is the hardest compound used forPolyurethane tubing, it is still more flexible and has a smaller bendradius (without kinking) than most other plastic tubing. Producedfrom ether base (polytetra-methylene glycol ether) raw materialassures resistance to moisture, fungus, abrasion and a broad range

of chemicals making it a popular choice for many applications. A wide selection of colors makes it adaptable to the functional andaesthetic requirements of most pneumatic circuits and equipment. 95A Durometer Polyurethane Tubing can be used with most brands of Push-To-Connect or Hose Barb Fittings.

95A Durometer Polyurethane Tubing



Wor

king

Pre

ssur

e (P

SIG

)

68 100

50

0

150

100

200

250

300

125 150 175

1/8, 1/4 x .125 ID3/165/321/4 x .170 ID, 3/81/2

95A Durometer Polyurethane Fractional Inch Tubing


Wor

king

Pre

ssur

e (P

SIG

)

68 100

50

0

150

100

200

125 150 175

4mm, 5mm10 x 6.5mm6mm, 10 x 7mm8mm, 12mm

95A Durometer Polyurethane Metric Tubing

Polyurethane tubing is usually the best choice for applicationsrequiring extensive flexing, a small bend radius or where kinking can be a problem. Nycoil uses ether base (polytetra-methylene glycol ether) raw material because of its hydrolytic resistance (will not break down or be affected in any way by moisture). Being anaturally rubbery compound, it requires no plasticizers that can leach out over time. This compound also offers superior resistance to grease, oils, fuels and abrasion, making it suitable for a widevariety of applications.

Due to its lower burst and temperature characteristics, the uses for Polyurethane is best recommended on applications where theflow rate is not critical and temperature elevation of the tubing is not a factor. When using Polyurethane tubing in most pneumaticsystems, one size larger tube is often required in order to meet thenecessary flow criteria.

As a result, applications should be limited to areas of consistent lowtemperatures and where high and continued flexibility is essential. A typical example of this would be a “pick and place” operation.

Since Nycoil “Poly-Matic” Push-To-Connect Fittings have thehighest gripping “force” as compared to other brands, it is assuredthat our tubing will always work with our fittings. However, whenusing Push-To-Connect Fittings from other manufacturers with any brand of Polyurethane tubing, testing for retention reliability is strongly recommended. Further, we recommend using onlyPolyurethane tubing made from 95A Durometer hardness compoundwith Push-To-Connect Fittings. In addition, compression type fittingsshould never be used with Polyurethane tubing of any hardness.


Polyurethane

See page 10 for 85A Durometer Polyurethane Tubing.


1/8 0.062 S322– S722– S622– 0.031 0 = Clear5/32 0.093 S325– S725– S625– 0.031 1 = Black1/4 0.125 S346– S746– S646– 0.062

· Adding a Color Code suffix to the part number is required. If no Color Code is selected, Clear (0) color will be supplied.



Pneumatic Tubing

EZ-Strip® and Skip-Bond® Tubing

Due to its extreme flexibility and tight bend radius, 85A DurometerPolyurethane Tubing is ideal for small control circuits or applicationsrequiring repetitive flexing. Just as we do with our 95A DurometerPolyurethane Tubing, Nycoil uses ether base raw material for our 85A Durometer Polyurethane Tubing to assure superior moisture,fungus and abrasion resistance. Although its chemical compatibility is similar to that of 95A Durometer Polyurethane, the burst pressure

of 85A Durometer Polyurethane is significantly lower, so thisrequirement must be carefully considered before a final tubingselection is made.

NOTE: 85A Durometer Polyurethane Tubing Should Only Be Used With Barbed Fittings.

85A Durometer Polyurethane Tubing NEW!


Wor

king

Pre

ssur

e (P

SIG

)

68 100

50

0

150

100

200

125 150 175

1/8, 1/45/32


Nycoil offers Bonded Tubing in Polyurethane and Nylon 12.Due to the differences in the properties of these two materials, each is bonded in a different manner.

Polyurethane uses our EZ-Strip process, which is a continuous bond along the entire length of the tubes. Bonded Polyurethaneis easily strippable, meaning the tubes can be pulled apart withoutcompromising their dimensional integrity. Maintaining perfect“roundness” is essential for a secure and leak free fitting connection.

Since it is not easily strippable material, Nylon 12 uses our Skip-Bond process of intermittently bonding the tubes that leavessections “unbonded” for fitting installation. Even though the tubesare not continuously bonded, they will hold securely together for easy routing.

EZ-Strip and Skip-Bond also available as Precision Coils. Please refer to our Precision Mini-Coils on page 12. Multi tube Mini-Coilshave the same Coil O.D. and material length as standard Mini-Coils. To order multi tube Mini-Coils, select the coil from page 12, add the“B” prefix to the selected part number and then replace the colorcode suffix with the number of tubes required.

Example: B48132 is a 5/32" O.D. PU Mini-Coil with Clear and Black twin tubes.

We have standard Coils in stock for 2, 3 and 4 tubes. Colorsequence is the same as the tubes specified on the next page.

EZ-Strip and Skip-Bond NEW!

Tube O.D. Tube I.D. Part Number Length Codein in Number of Tubes Suffix Key

1/8 0.062 BS22– - – 2, 3, 4, 5, 6 A = 25 feet5/32 0.093 BS25– - – 2, 3, 4, 5, 6 B = 50 feet1/4 0.125 BS46– - – 2, 3, 4, 5, 6 C = 100 feet

Complete the Part Number by adding the correct number for the number of tubes required in the strip and the correct letter for the length. Example: BS254-B = 4 tubes, and 50'.

85A Durometer Polyurethane “EZ-Strip”


EZ-Strip® and Skip-Bond® Tubing

Quick Installation: Running a single strip of bonded tubing is much faster than running multiple tubes individually —SAVES TIME & MONEY!

Space Economy: Bonded tubes provide a more precise and consistent dimension than bundles, wraps or channels — ALLOWS COMPACT CIRCUITS!

Visible Traceability: Color-coded bonded tubes make routing a circuit less complicated and easier to follow — SIMPLIFIES TROUBLESHOOTING & CUTS COSTS!

Eliminates Clutter: Bonded tubing will eliminate tangled and sloppy tubing runs — ENHANCES THE APPEARANCE OF THE CIRCUIT & EQUIPMENT!

Features and Benefits

2 = Natural & Black A = 25 feet3 = Natural, Black & Red B = 50 feet4 = Natural, Black, Red & Blue C = 100 feet 5 = Natural, Black, Red, Blue & Green6 = Natural, Black, Red, Blue, Green & Yellow

First add the number of tubes required to the first location to the Part Number. Then add the A, B, or C after the “–” to complete thePart Number and to designate the required continuous length.

Longer continuous lengths, more than 6 tubes or custom colorsequences available on request.


1/8 0.080 B121– - – 2, 3, 4 A = 25 feet1/8 0.093 B122– - – 2, 3, 4 B = 50 feet

5/32 0.106 B123– - – 2, 3, 4 C = 100 feet3/16 0.137 B133– - – 2, 3, 41/4 0.180 B144– - – 2, 3, 43/8 0.275 B166– - – 2, 3, 4

Complete the Part Number by adding the correct number for the number of tubes required in the strip and the correct letter for the length. Example: B1444-B = 4 tubes, and 50'.

Nylon 12 “Skip-Bond”

2

3

4

5

6

NEW!

NEW!


1/8 0.062 B322– - – 2, 3, 4, 5, 6 A = 25 feet5/32 0.093 B325– - – 2, 3, 4, 5, 6 B = 50 feet3/16 0.107 B333– - – 2, 3, 4 C = 100 feet1/4 0.125 B346– - – 2, 3, 4, 5, 63/8 0.250 B366– - – 2, 3, 4, 5, 6

Complete the Part Number by adding the correct number for the number of tubes required in the strip and the correct letter for the length. Example: B3254-B = 4 tubes, and 50'.

95A Durometer Polyurethane “EZ-Strip” NEW!

Tube O.D. Part Thread A Bin UNF Number Length in in

1/8 10-32 56820 0.14 0.98 0.385/32 10-32 56810 0.14 1.01 0.381/4 10-32 56840 0.14 1.10 0.50

1/8 1/16 56821 1.09 3/81/8 1/8 56822 0.87 7/161/8 1/4 56824 0.93 9/16

5/32 1/16 56811 1.15 3/85/32 1/8 56812 0.96 7/165/32 1/4 56814 0.92 9/161/4 1/16 56841 1.35 1/21/4 1/8 56842 1.06 1/21/4 1/4 56844 0.90 9/161/4 3/8 56846 0.93 11/165/16 1/8 56852 1.36 9/165/16 1/4 56854 1.24 9/163/8 1/8 56862 1.47 11/163/8 1/4 56864 1.53 11/163/8 3/8 56866 1.43 11/163/8 1/2 56868 1.09 7/81/2 1/4 56884 1.87 7/81/2 3/8 56886 1.87 7/81/2 1/2 56888 1.75 7/8

Tube O.D. Part A Bin NPT Number in in


Knurled Male Connector

B

"O" RING

A


1/8 1/8 56622 1.34 1/25/32 1/8 56612 1.37 1/21/4 1/8 56642 1.34 1/21/4 1/4 56644 1.54 5/83/8 1/4 56664 1.78 3/43/8 3/8 56666 1.78 13/16

Female Connector

A

B

B

A

Poly-Matic® Nickel Plated Brass “Push-In” Tube FittingsFractional Inch size tubing & NPT threads

Male Connector

5/32 1/8 58012 1.03 1.55 0.91 0.77 15/325/32 1/4 58014 1.03 1.60 0.91 0.83 15/321/4 1/8 58042 1.05 1.57 0.89 0.77 15/321/4 1/4 58044 1.05 1.57 0.89 0.83 15/323/8 1/4 58064 1.41 2.02 1.28 0.89 1/21/2 1/4 58084 1.74 2.62 1.54 1.23 5/81/2 3/8 58086 1.74 2.62 1.54 1.23 5/8

45º Elbow

E

A

B

D

C

Tube O.D. Part A B C D Ein NPT Number in in in in in


5/32 56511 1.14 1.14 0.92 0.92 23/641/4 56544 1.25 1.25 0.98 0.98 15/325/16 56555 1.29 1.29 1.00 1.00 15/323/8 56566 1.65 1.65 1.31 1.31 1/21/2 56588 1.97 1.97 1.54 1.54 5/8

5/32 1/8 57012 1.23 0.95 0.94 0.68 15/321/4 1/8 57042 1.27 1.13 0.98 0.87 15/321/4 1/4 57044 1.42 1.37 1.05 1.03 1/23/8 1/4 57064 1.67 1.40 1.31 1.06 1/2


1/8 1/16 56921 1.13 0.98 0.91 0.76 23/641/8 1/8 56922 1.13 0.93 0.91 0.71 23/64

5/32 1/8 56912 1.16 0.93 0.94 0.71 23/645/32 1/4 56914 1.23 1.18 0.94 0.92 15/321/4 1/8 56942 1.20 0.95 0.98 0.71 23/641/4 1/4 56944 1.27 1.18 0.98 0.92 15/325/16 1/8 56952 1.29 1.07 1.00 0.78 15/325/16 1/4 56954 1.29 1.20 1.00 0.92 15/323/8 1/8 56962 1.67 1.24 1.31 0.90 1/23/8 1/4 56964 1.67 1.29 1.31 0.95 1/23/8 3/8 56966 1.67 1.33 1.31 0.99 1/21/2 3/8 56986 1.99 1.51 1.54 1.08 5/81/2 1/2 56988 1.99 1.70 1.54 1.28 5/8

Female Elbow

AC

BD

E



Male Elbow

A

C

BD

E


Union Elbow

A

C

BD

E

Tube O.D. Part A B C D Ein Number in in in in in

1/8 1/8 57922 1.13 1.15 0.91 0.93 7/161/8 1/4 57924 1.13 1.16 0.91 0.94 9/16

5/32 1/8 57912 1.16 1.15 0.94 0.93 7/165/32 1/4 57914 1.16 1.16 0.94 0.94 9/161/4 1/8 57942 1.20 1.17 0.98 0.93 7/161/4 1/4 57944 1.20 1.21 0.98 0.96 9/161/4 3/8 57946 1.27 1.21 0.98 0.96 11/165/16 1/8 57952 1.29 1.23 1.00 0.94 7/165/16 1/4 57954 1.37 1.32 1.00 1.03 9/163/8 1/8 57962 1.60 1.38 1.31 1.04 7/163/8 1/4 57964 1.60 1.48 1.31 1.14 9/163/8 3/8 57966 1.67 1.60 1.31 1.26 11/163/8 1/2 57968 1.67 1.76 1.31 1.42 7/81/2 1/4 57984 1.99 1.65 1.54 1.23 9/161/2 3/8 57986 1.99 1.69 1.54 1.27 11/161/2 1/2 57988 1.99 1.94 1.54 1.52 7/8

360º Swivel Elbow

AC

BD "O" RING

E360˚


1/8 10-32 55020 1.16 0.68 0.96 0.39 3/85/32 10-32 55010 1.19 0.68 0.99 0.39 3/81/4 10-32 55040 1.21 0.80 1.01 0.45 1/2

E

BD

AC

Tube O.D. Part A B C D Ein UNF Number in in in in in

1/8 10-32 55120 1.92 0.68 0.96 0.39 3/85/32 10-32 55110 1.98 0.68 0.99 0.39 3/8

Banjo Tee / UNF Thread

E

BD

AC

Tube O.D. Part A B C D Ein UNF Number in in in in in

1/8 1/8 57122 1.80 1.13 0.89 0.91 7/165/32 1/8 57112 1.88 1.16 0.94 0.94 7/161/4 1/8 57142 1.92 1.22 0.94 0.98 7/161/4 1/4 57144 1.97 1.22 0.99 0.98 9/165/16 1/8 57152 1.94 1.34 0.94 1.00 7/165/16 1/4 57154 1.93 1.34 1.03 1.00 7/163/8 1/4 57164 2.45 1.65 1.14 1.31 9/163/8 3/8 57166 2.56 1.65 1.26 1.31 11/161/2 3/8 57186 2.81 1.97 1.27 1.54 11/161/2 1/2 57188 3.03 1.97 1.49 1.54 7/8

Male Swivel Run Tee

BD

AC

360˚

"O" RING

E



1/8 1/8 57222 1.82 1.16 0.91 0.94 7/165/32 1/8 57212 1.88 1.16 0.94 0.94 7/161/4 1/8 57242 1.96 1.18 0.98 0.94 7/161/4 1/4 57244 1.96 1.23 0.98 0.99 9/165/16 1/8 57252 2.00 1.38 1.00 1.04 7/165/16 1/4 57254 2.00 1.47 1.00 1.13 7/163/8 1/8 57262 2.61 1.51 1.31 1.17 9/163/8 1/4 57264 2.61 1.48 1.31 1.14 9/163/8 3/8 57266 2.61 1.60 1.31 1.26 11/161/2 1/4 57284 3.08 1.65 1.54 1.23 9/161/2 3/8 57286 3.08 1.69 1.54 1.27 11/161/2 1/2 57288 3.08 1.92 1.54 1.49 7/8


Male Swivel Branch Tee

A

C

BD

360˚

"O" RING

E

Banjo Elbow / UNF Thread

Please see page 46 for our selection of “Plastic Plugs”


1/8 58222 1.64 9/16 0.66 0.50 11/165/32 58211 1.70 9/16 0.69 0.50 11/161/4 58244 1.74 5/8 0.74 0.56 3/45/16 58255 1.91 7/8 0.80 0.75 13/8 58266 2.14 7/8 0.96 0.75 11/2 58288 2.68 1-1/8 1.13 1.00 1-1/4

Bulkhead Union

BE

A

C

D


1/8 56422 1.82 1.13 0.91 0.91 23/645/32 56411 1.88 1.16 0.94 0.94 23/641/4 56444 1.96 1.22 0.98 0.98 23/645/16 56455 2.00 1.34 1.00 1.00 1/23/8 56466 2.61 1.65 1.31 1.31 1/21/2 56488 3.08 1.97 1.54 1.54 5/8


Union Tee

AC

B

DE

1/8 56222 1.64 0.385/32 56211 1.70 0.381/4 56244 1.74 0.505/16 56255 1.76 0.563/8 56266 2.14 0.691/2 56288 2.68 0.88

Tube O.D. Part A Bin Number in in

Straight Union

A

B

1/4 5/32 59741 1.76 0.50 0.50 21/4 1/8 59742 1.74 0.50 0.50 25/16 5/32 59751 1.78 0.56 0.56 25/16 1/4 59754 1.75 0.56 0.56 23/8 5/32 59761 1.99 0.69 0.47 13/8 1/8 59762 1.96 0.69 0.47 13/8 1/4 59764 1.97 0.69 0.50 13/8 5/16 59765 1.98 0.69 0.69 21/2 1/4 59784 2.30 0.88 0.56 11/2 3/8 59786 2.39 0.88 0.69 1

Lg Tube Sm Tube Part A B CO.D. (in) O.D. (in) Number in in in Style

Union Reducer

A

B C

A

CB

STYLE 2

STYLE 1


As a full service tubing extruder, Nycoil can supply longer continuous (no splices) lengths thanour “standard” offerings as shown in this catalog. For example, we can supply in excess of25,000 continuous feet of small diameter tubing on our largest reels. In addition, we will extrude“custom” size (inside and outside diameter) tubing, specific colors, provide special cut lengths orbond any size tubing in any color sequence to meet your requirements. Give us a call with yourspecifications for a quotation!

1/4 1/8 58642 1.65 5/8 0.65 9/16-24UN-2A 3/41/4 1/4 58644 1.65 5/8 0.65 9/16-24UN-2A 3/43/8 1/4 58664 1.83 7/8 0.64 3/4-24UN-2A 1

Female Bulkhead

EDB

A

C

Tube O.D. Part A B C D Ein NPT Number in in in Thread in

1/4 5/32 54041 3.69 1.30 13/64 2.85 0.75 6 PORT1/4 1/4 54044 3.69 1.23 13/64 2.85 0.75 6 PORT3/8 1/4 54064 4.23 1.48 13/64 3.35 1.00 6 PORT

Material: Black Anodized Aluminum

Manifold

C

AD

BE

Lg Tube O.D. Sm Tube O.D. Part A B C D E(2 Ports) (4 Ports) Number in in in in in Style

1/4 5/32 52614 1.65 0.383/8 1/4 52646 1.93 0.50

Plug Reducer

A

B

Plug O.D. Tube O.D. Part A B(in) (in) Number in in



5/32 5/32 54211 1.25 1.72 3/16 0.75 0.50 4 PORT

Material: Brass

Manifold

C

D

A

B

E

Top Tube O.D. Bottom Tube Part A B C D E(3 Ports) O.D. (1Port) Number in in in in in Style

Nycoil offers a specially formulated Nylon tubing with a 1/8" outside diameter and a 0.023" wall (500 PSI working pressure) on 1000' reels that’s used for injection lubesystems. This “capillary tubing” is in stock and can be ordered as Part Number 60218.Contact us for more information.


1/8 56120 0.76 0.41 0.215/32 56110 0.76 0.41 0.241/4 56140 0.77 0.53 0.253/8 56160 0.98 0.75 0.281/8 56320* 0.76 0.41 0.21

5/32 56310* 0.76 0.41 0.241/4 56340* 0.77 0.53 0.253/8 56360* 0.98 0.75 0.28

* Includes external “O”Ring.

Encapsulated Cartridge

B

A

C

Tube O.D. Part A B Cin Number in in in

5/32 56010 0.59 0.41 0.301/4 56040 0.57 0.53 0.233/8 56060 0.71 0.75 0.25

Standard Cartridge

C

A

B

Tube O.D. Part A B Cin Number in in in


Encapsulated Cartridge

Features:– Simplified machining– Pre-installed internal seal– Available with additional

external “O”Ring– Fully assembled for

automated installation

Standard Cartridge

Features:– Better leak-path elimination– Direct seal between tubing

and housing– Alternate “O”Ring materials

Add the benefits of the Poly-Matic gripping teeth to yourmolded, forged, cast or machined components and your fluid connections. Permanently installed Cartridges allow closer spacing and lower profiles in Plastic, Brass, AnodizedAluminum, Steel and other metals.

Poly-Matic Cartridges are available in 2 configurations:

Encapsulated Cartridges are supplied fully assembled, readyfor installation. The Encapsulated Cartridge contains the seal fully enclosed in the Cartridge Body and is suitable for

Automated Assembly. The installation cavity is one singlediameter. For use in Brass, Anodized Aluminum, Steel andother metals, an external “O”Ring can be furnished.

Standard Cartridges are shipped with the sealing “O”Ringseparate. The installation cavity requires steps to locate andsupport the “O”Ring. Suitable for use with Plastics, Brass,Anodized Aluminum, Steel and other metals.

Contact the factory for Installation Cavity drawings and dimensions.

Rigid extrusion standards and tight quality control specifications sometimes result in splices.It is Nycoil’s objective to supply the longest continuous lengths (no splices) of tubing possible at all times. Our Splicing Policy is: Slit Packs – No Splices, 500' Reels – One (1) SpliceMaximum, 1000' Reels – (2) Splices Maximum. In all cases, no length will be shorter than100'. Continuous lengths are available upon request – please consult the factory.


EXCLUSIVE! Our “Conversion” Fittings allow you to use Fractional Inch size tubing for connections having BSPT threads!Poly-Matic® Nickel Plated Brass “Push-In” Tube Fittings

Our Poly-Matic Conversion Fittings provide a quick and convenient way to connect fractional inch tubing to machinery or equipment having BSPT threads. This eliminatesthe need to use BSPT to NPT conversion fittings or being

limited to using metric size tubing. To make them easy toidentify, these Conversion Fittings have red release collars indicating they are to be used with fractional inch tubing and notches on the hex corners signifying BSPT threads.

5/32 R1/8 Q6812 0.96 7/165/32 R1/4 Q6814 0.92 9/161/4 R1/8 Q6842 1.06 1/21/4 R1/4 Q6844 0.90 9/165/16 R1/8 Q6852 1.36 9/165/16 R1/4 Q6854 1.24 9/165/16 R3/8 Q6856 1.10 11/163/8 R1/4 Q6864 1.53 11/163/8 R3/8 Q6866 1.43 11/161/2 R1/4 Q6884 1.87 7/81/2 R3/8 Q6886 1.87 7/8

Tube O.D. Part A Bin BSPT Number in in

Male Connector (Inch Tube x BSPT)

B

A

Tube O.D. Part A B C D Ein BSPT Number in in in in in

5/32 R1/8 Q7912 1.16 1.15 0.94 0.93 7/165/32 R1/4 Q7914 1.16 1.16 0.94 0.94 9/161/4 R1/8 Q7942 1.20 1.17 0.98 0.93 7/161/4 R1/4 Q7944 1.20 1.21 0.98 0.96 9/165/16 R1/8 Q7952 1.29 1.23 1.00 0.94 7/165/16 R1/4 Q7954 1.37 1.32 1.00 1.03 9/163/8 R1/8 Q7962 1.60 1.38 1.31 1.04 7/163/8 R1/4 Q7964 1.60 1.48 1.31 1.14 9/163/8 R3/8 Q7966 1.67 1.60 1.31 1.26 11/161/2 R1/4 Q7984 1.99 1.65 1.54 1.23 9/161/2 R3/8 Q7986 1.99 1.69 1.54 1.27 11/16

Swivel Elbow (Inch Tube x BSPT)

AC

BD "O" RING

E360˚


5/32 R1/8 Q7112 1.88 1.16 0.94 0.94 7/161/4 R1/8 Q7142 1.92 1.22 0.94 0.98 7/161/4 R1/4 Q7144 1.97 1.22 0.99 0.98 9/165/16 R1/8 Q7152 1.94 1.34 0.94 1.00 7/165/16 R1/4 Q7154 2.03 1.34 1.03 1.00 9/163/8 R1/4 Q7164 2.45 1.65 1.14 1.31 9/163/8 R3/8 Q7166 2.56 1.65 1.26 1.31 11/161/2 R3/8 Q7186 2.81 1.97 1.27 1.54 11/16

Male Swivel Run Tee (Inch Tube x BSPT)

BD

AC

360˚

"O" RING

E

5/32 R1/8 Q7212 1.88 1.16 0.94 0.94 7/161/4 R1/8 Q7242 1.96 1.18 0.98 0.94 7/161/4 R1/4 Q7244 1.96 1.23 0.98 0.99 9/165/16 R1/8 Q7252 2.00 1.38 1.00 1.04 7/165/16 R1/4 Q7254 2.00 1.48 1.31 1.14 9/163/8 R1/8 Q7262 2.61 1.51 1.31 1.17 7/163/8 R1/4 Q7264 2.61 1.48 1.31 1.14 9/163/8 R3/8 Q7266 2.61 1.60 1.31 1.26 11/161/2 R1/4 Q7284 3.08 1.65 1.54 1.23 9/161/2 R3/8 Q7286 3.08 1.69 1.54 1.27 11/16


Swivel Branch Tee (Inch Tube x BSPT)

A

C

BD

360˚

"O" RING

E

NEW!

NEW!

NEW!

NEW!

Although Nycoil offers tubing in metric sizes (outside and inside diameters), we package it by the foot to make it easier and less complicated to order.


B

"O" RING

A

4 M5 101001 1.01 25.6 3/8DIA KNURL4 R1/8 101002 0.96 24.5 7/164 R1/4 101003 0.92 23.4 9/166 M5 101011 1.10 28.0 1/2DIA KNURL6 R1/8 101012 1.06 26.8 1/26 R1/4 101013 0.90 22.7 9/168 R1/8 101017 1.35 34.4 9/168 R1/4 101018 1.24 31.6 9/168 R3/8 101019 1.10 28.1 11/1610 R1/4 101023 1.53 38.9 11/1610 R3/8 101024 1.43 36.4 11/1610 R1/2 101025 1.09 27.7 7/812 R1/4 101028 1.87 47.6 7/812 R3/8 101029 1.87 47.6 7/812 R1/2 101030 1.75 44.5 7/8

Male Connector

B

A

Tube O.D. Part A A Bmm BSPT Number in mm in Note

4 R1/8 102002 1.16 1.15 0.94 0.93 7/164 R1/4 102003 1.16 1.16 0.94 0.94 9/166 R1/8 102012 1.20 1.17 0.98 0.93 7/166 R1/4 102013 1.22 1.32 1.00 1.03 9/168 R1/8 102017 1.29 1.23 1.00 0.94 7/168 R1/4 102018 1.29 1.32 1.00 1.03 9/168 R3/8 102019 1.46 1.53 1.10 1.19 11/1610 R1/4 102023 1.60 1.48 1.31 1.14 9/1610 R3/8 102024 1.67 1.60 1.31 1.26 11/1612 R1/4 102028 1.99 1.65 1.54 1.23 9/1612 R3/8 102029 1.99 1.69 1.54 1.27 11/1612 R1/2 102030 1.99 1.94 1.54 1.52 7/8

360º Swivel Elbow

AC

BD "O" RING

E360˚

Tube O.D. Part A B C D Emm BSPT Number in in in in in

4 R1/8 106002 1.88 1.16 0.94 0.94 7/166 R1/8 106012 1.92 1.22 0.94 0.98 7/166 R1/4 106013 1.97 1.22 0.99 0.98 9/168 R1/8 106017 1.94 1.34 0.94 1.00 7/168 R1/4 106018 2.03 1.34 1.03 1.00 9/1610 R1/4 106023 2.45 1.65 1.14 1.31 9/1610 R3/8 106024 2.56 1.65 1.26 1.31 11/1612 R3/8 106029 2.81 1.97 1.27 1.54 11/1612 R1/2 106030 3.03 1.97 1.49 1.54 7/8

Male Swivel Run Tee

BD

AC

360˚

"O" RING

E


Poly-Matic® Nickel Plated Brass “Push-In” Tube FittingsMetric size tubing & BSPT threads

Tubing and fitting compatibility is an important consideration when designing a circuit or specifying components. Nylon Tubing can be used with Push-In,Compression or Hose Barb Fittings. Polyethylene Tubing can be used with Push-In,Compression or Hose Barb Fittings. 95A Durometer Polyurethane Tubing can beused with Push-In or Hose Barb Fittings. 85A Durometer Polyurethane Tubing canonly be used with Hose Barb Fittings.


Lg Tube Sm Tube Part A B C A B CO.D. (mm) O.D. (mm) Number in in in Style mm mm mm

6 4 109052 1.76 1/2 1/2 2 44.8 12.7 12.78 4 109053 1.78 9/16 9/16 2 45.1 14.3 14.38 6 109064 1.74 9/16 9/16 2 44.3 14.3 14.310 6 109065 1.97 11/16 1/2 1 50.0 17.5 12.710 8 109069 1.98 11/16 11/16 2 50.2 17.5 17.512 10 109073 2.39 7/8 11/16 1 60.7 22.2 17.5

Union Reducer

Tube O.D. Part A A B Bmm Number in mm in mm

4 109050 1.70 43.1 3/8 9.56 109063 1.74 44.1 1/2 12.78 109068 1.76 44.7 9/16 14.310 109072 2.14 54.4 11/16 17.512 109075 2.68 68.0 7/8 22.2

Straight Union

A

B

Tube O.D. Part A B C D Emm Number in in in in in

4 104050 1.14 1.14 0.92 0.92 23/646 104063 1.25 1.25 0.98 0.98 15/328 104068 1.29 1.29 1.00 1.00 15/3210 104072 1.65 1.65 1.31 1.31 1/212 104075 1.97 1.97 1.54 1.54 5/8

Union ElbowA

C

BD

E

Tube O.D. Part A B C D Emm Number in in in in in

4 105050 1.88 1.16 0.94 0.94 23/646 105063 1.96 1.22 0.98 0.98 23/648 105068 2.00 1.34 1.00 1.00 1/210 105072 2.61 1.65 1.31 1.31 1/212 105075 3.08 1.97 1.54 1.54 5/8

Union Tee

A

B C

A

CB

STYLE 2

STYLE 1

AC

B

DE



Tube O.D. Thread Part A B C D Emm Size Number in in in in in

4 M5 107001 1.98 0.68 0.99 0.39 3/8

Banjo Tee

Tube O.D. Thread Part A B C D Emm Size Number in in in in in

4 M5 102001 1.18 0.66 0.98 0.38 3/8

Banjo Elbow

Tube O.D. Part A A Bmm BSPT Number in mm in

4 R1/8 108002 1.37 34.7 1/24 R1/4 108003 1.49 37.9 5/86 R1/8 108012 1.34 34.0 1/26 R1/4 108013 1.54 39.1 5/88 R1/8 108017 1.29 32.7 9/168 R1/4 108018 1.47 37.4 5/810 R3/8 108024 1.78 45.1 13/1612 R3/8 108029 1.90 48.2 7/8

Female Connector


4 R1/8 107002 1.88 1.16 0.94 0.94 7/166 R1/8 107012 1.96 1.18 0.98 0.94 7/166 R1/4 107013 1.96 1.23 0.98 0.99 9/168 R1/8 107017 2.00 1.38 1.00 1.04 7/168 R1/4 107018 2.00 1.48 1.00 1.14 9/1610 R1/4 107023 2.61 1.48 1.31 1.14 9/1610 R3/8 107024 2.61 1.60 1.31 1.26 11/1612 R1/4 107028 3.08 1.65 1.54 1.23 9/1612 R3/8 107029 3.08 1.69 1.54 1.27 11/1612 R1/2 107030 3.08 1.91 1.54 1.19 7/8


E

BD

AC

E

BD

AC

A

B

A

C

BD

360˚

"O" RING

E


“Working Temperature” is the range at which a particular tubing material can be effectively used. Before tubing material can be properly selected, the WorkingTemperature should be known. Here are the Working Temperature ranges for the three (3) most common tubing materials: Nylon Tubing: -40ºF to +200ºF (-40ºC to +93ºC), Polyethylene Tubing: -100ºF to +175ºF (-73ºC to +79.5ºC),Polyurethane Tubing: -40ºF to +165ºF (-40ºC to +74ºC).

Ny-Shield Tubing is 95A Durometer Polyurethane Tubing with a flameretardant outer jacket to protect the tubing from sparks associated withwelding. Available in a variety of sizes with several jacket colors as straighttubing and coiled hoses.

Ask for Product Bulletin TB01D for complete details!

Ny-Shield® Tubing NEW!

Ny-Chem Tubing is a flexible, high grade Kynar PVDF (Polyvinylidene Fluoride)Tubing that is one of the purist of all commercial resins, making it ideal forapplications where compliance to most agency regulations such as FDA,USDA, USP and NSF is required. Available in a variety of sizes and can also bemade into coils.


Ny-Chem® Tubing NEW!



Tube O.D. Part A B Cmm Number in in in

4 111050 0.59 0.41 0.306 111063 0.57 0.53 0.2310 111072 0.71 0.75 0.25

Cartridge

Side Ports Top Ports Part A B Mounting D EO.D. (mm) O.D. (mm) Number in in Hole (C) in in Style

6 4 114052 3.69 1.30 13/64 2.85 0.75 6 PORT6 6 114063 3.69 1.23 13/64 2.85 0.75 6 PORT

Material: Black Anodized Aluminum

Manifold

C

AD

BE

C

A

B



5/32 1/16 86811 1.15 3/85/32 1/8 86812 0.96 7/165/32 1/4 86814 0.92 9/161/4 1/8 86842 1.06 1/21/4 1/4 86844 0.90 9/161/4 3/8 86846 0.93 11/163/8 1/8 86862 1.47 11/163/8 1/4 86864 1.53 11/163/8 3/8 86866 1.43 11/163/8 1/2 86868 1.09 7/81/2 1/4 86884 1.87 7/81/2 3/8 86886 1.87 7/81/2 1/2 86888 1.75 7/8

Male Connector

B

A


5/32 1/8 86612 1.37 1/21/4 1/8 86642 1.37 1/21/4 1/4 86644 1.57 9/163/8 1/4 86664 1.77 3/43/8 3/8 86666 1.77 13/16

Female Connector

A

B


5/32 1/8 86912 1.16 0.93 0.94 0.71 23/645/32 1/4 86914 1.23 1.18 0.94 0.82 15/321/4 1/8 86942 1.20 0.95 0.98 0.71 23/641/4 1/4 86944 1.27 1.18 0.98 0.92 15/323/8 1/4 86964 1.67 1.29 1.31 0.95 1/23/8 3/8 86966 1.67 1.33 1.31 0.99 1/21/2 3/8 86986 1.99 1.51 1.54 1.08 5/81/2 1/2 86988 1.99 1.70 1.54 1.28 5/8

Male Elbow

A

C

BD

E


5/32 86511 1.14 1.14 0.92 0.92 23/641/4 86544 1.25 1.25 0.98 0.98 15/323/8 86566 1.65 1.65 1.31 1.31 1/21/2 86588 1.97 1.97 1.54 1.54 5/8

Union Elbow

A

C

BD

E

Poly-Matic® Nickel Plated Brass “Push-In” Tube FittingsD.O.T – Fractional Inch size tubing & NPT threads



Tube O.D. Part A Bin Number in in

5/32 86211 1.70 0.381/4 86244 1.74 0.503/8 86266 2.14 0.691/2 86288 2.68 0.88

Straight Union

A

B


5/32 1/8 87912 1.16 1.15 0.94 0.93 7/165/32 1/4 87914 1.16 1.16 0.94 0.94 9/161/4 1/8 87942 1.20 1.17 0.98 0.93 7/161/4 1/4 87944 1.20 1.21 0.98 0.96 9/161/4 3/8 87946 1.27 1.21 0.98 0.96 11/163/8 1/8 87962 1.60 1.38 1.31 1.04 7/163/8 1/4 87964 1.60 1.48 1.31 1.14 9/163/8 3/8 87966 1.67 1.60 1.31 1.26 11/163/8 1/2 87968 1.67 1.76 1.31 1.42 7/81/2 1/4 87984 1.99 1.65 1.54 1.23 9/161/2 3/8 87986 1.99 1.69 1.54 1.27 11/161/2 1/2 87988 1.99 1.94 1.54 1.52 7/8

360º Swivel Elbow

AC

BD "O" RING

E360˚


5/32 1/8 87212 1.88 1.16 0.94 0.94 7/161/4 1/8 87242 1.96 1.18 0.98 0.94 7/161/4 1/4 87244 1.96 1.23 0.98 0.99 9/163/8 1/4 87264 2.61 1.48 1.31 1.14 9/163/8 3/8 87266 2.61 1.60 1.31 1.26 11/161/2 1/4 87284 3.08 1.65 1.54 1.23 9/161/2 3/8 87286 3.08 1.69 1.54 1.27 11/161/2 1/2 87288 3.08 1.91 1.54 1.49 7/8


A

C

BD

360˚

"O" RING

E


5/32 86411 1.88 1.16 0.94 0.94 23/641/4 86444 1.96 1.22 0.98 0.98 23/643/8 86466 2.61 1.65 1.31 1.31 1/21/2 86488 3.08 1.97 1.54 1.54 5/8

Union Tee

AC

B

DE



5/32 1/8 87012 1.23 0.95 0.94 0.68 15/321/4 1/8 87042 1.27 1.13 0.98 0.87 15/321/4 1/4 87044 1.42 1.37 1.05 1.03 1/23/8 1/4 87064 1.64 1.40 1.31 1.06 1/2

Female Elbow

AC

BD

E


5/32 1/8 87112 1.88 1.16 0.94 0.94 7/161/4 1/8 87142 1.92 1.22 0.94 0.98 7/161/4 1/4 87144 1.97 1.22 0.99 0.98 9/163/8 1/4 87164 2.45 1.65 1.14 1.31 9/163/8 3/8 87166 2.56 1.65 1.26 1.31 11/161/2 3/8 87186 2.81 1.97 1.27 1.54 11/161/2 1/2 87188 3.03 1.97 1.49 1.54 7/8

Male Swivel Run Tee

BD

AC

360˚

"O" RING

E


1/4 88244 1.74 5/8 0.74 0.56 3/43/8 88266 2.14 7/8 0.96 0.75 11/2 88288 2.68 1-1/8 1.13 1.00 1-1/4

Bulkhead Union

BE

A

C

D


5/32 1/8 88012 1.03 1.55 0.91 0.77 15/325/32 1/4 88014 1.03 1.60 0.91 0.83 15/321/4 1/8 88042 1.05 1.57 0.89 0.77 15/321/4 1/4 88044 1.05 1.57 0.89 0.83 15/323/8 1/4 88064 1.41 2.02 1.28 0.89 1/21/2 3/8 88086 1.74 2.62 1.54 1.23 5/8

45º Elbow

E

A

B

D

C

In addition to our “standard” line of tubing as shown in this catalog, Nycoil willextrude custom tubing to meet your specifications. Call us with your specific length,size, color, print or packaging requirements.



Composite “Push-In” Tube FittingsFractional Inch size tubing & NPT threads

1/8 1/8 P56822 11 0.07 0.283 0.472 0.251/8 1/4 P56824 14 0.07 0.315 0.591 0.59

5/32 1/8 P56812 11 7/64 0.334 0.472 0.265/32 1/4 P56814 14 7/64 0.275 0.590 0.563/16 1/8 P56832 7/16" 1/8 0.61 0.51 0.493/16 1/4 P56834 9/16" 5/32 0.59 0.65 0.971/4 1/8 P56842 11 5/32 0.472 0.472 0.261/4 1/4 P56844 14 5/32 0.374 0.590 0.501/4 3/8 P56846 18 3/16 0.295 0.767 0.885/16 1/8 P56852 13 3/16 0.787 0.551 0.455/16 1/4 P56854 14 1/4 0.661 0.590 0.585/16 3/8 P56856 18 1/4 0.464 0.767 0.893/8 1/8 P56862 16 5/32 0.894 0.689 0.793/8 1/4 P56864 16 9/32 0.807 0.689 0.733/8 3/8 P56866 18 9/32 0.689 0.767 0.973/8 1/2 P56868 22 9/32 0.610 0.945 2.001/2 1/4 P56884 22 1/4 1.1 0.945 1.621/2 3/8 P56886 22 9/32 1.1 0.945 0.891/2 1/2 P56888 22 9/32 1.1 0.945 2.51

Tube O.D. Z Part A B C Din NPT Number mm in in in oz

Male Connector – Nickel Plated Brass

Tube O.D. Z Part A B C Din UNF Number in mm in in oz

1/8 10-32 P56820 0.13 2 0.49 0.32 0.175/32 10-32 P56810 0.13 2 0.54 0.34 0.151/4 10-32 P56840 0.13 2 0.64 0.46 0.20

Male Connector 10-32 – Nickel Plated Brass

Tube O.D. Z Part A B C Din NPT/UNF Number mm in in in oz

1/8 10-32 P57920 8 0.34 0.52 0.57 0.141/8 1/8 P57922 11 0.34 0.53 0.57 0.291/8 1/4 P57924 14 0.34 0.55 0.57 0.63

5/32 10-32 P57910 8 0.33 0.53 0.55 0.145/32 1/8 P57912 11 0.33 0.53 0.55 0.285/32 1/4 P57914 14 0.33 0.55 0.55 0.623/16 1/8 P57932 11 0.43 0.67 0.85 0.451/4 10-32 P57940 11 0.43 0.63 0.71 0.261/4 1/8 P57942 11 0.43 0.67 0.71 0.321/4 1/4 P57944 14 0.43 0.63 0.71 0.511/4 3/8 P57946 18 0.43 0.65 0.71 0.795/16 1/8 P57952 11 0.53 0.75 0.91 0.295/16 1/4 P57954 14 0.53 0.71 0.91 0.585/16 3/8 P57956 18 0.53 0.73 0.91 0.813/8 1/8 P57962 15 0.63 0.91 1.08 0.603/8 1/4 P57964 15 0.63 0.91 1.08 0.743/8 3/8 P57966 18 0.63 0.87 1.08 0.963/8 1/2 P57968 22 0.63 0.91 1.08 1.691/2 1/4 P57984 20 0.87 1.22 1.38 1.421/2 3/8 P57986 20 0.87 1.22 1.38 1.441/2 1/2 P57988 24 0.87 1.12 1.38 1.89

Male Swivel Elbow

A

C

O.D.BZ

D

C

AZ

O.D.

B

D

AC

O.D.

ZB

D


Composite “Push-In” Tube Fittings Fractional Inch size tubing & NPT threads

Tube O.D. Z Part A B C D Ein NPT Number mm in in in in oz

1/8 1/8 P57022 13 0.34 0.91 0.37 0.57 0.385/32 1/8 P57012 13 0.33 0.91 0.37 0.55 0.415/32 1/4 P57014 16 0.33 1.08 0.55 0.55 0.141/4 1/8 P57042 13 0.43 1.02 0.37 0.71 0.471/4 1/4 P57044 16 0.43 1.18 0.55 0.71 0.385/16 1/8 P57052 13 0.53 1.12 0.37 0.91 0.505/16 1/4 P57054 16 0.53 1.28 0.55 0.91 0.853/8 1/4 P57064 16 0.63 1.52 0.55 1.04 0.901/2 3/8 P57086 22 0.87 1.88 0.65 1.38 2.47

Female Elbow

C

A

E

D

Z

O.D.

B

Tube O.D. Z Part A B C Ein NPT/UNF Number mm in in in oz

5/32 10-32 P52710 8 1.24 - 0.14 0.125/32 1/8 P52712 11 1.02 0.57 - 0.265/32 1/4 P52714 14 1.04 0.59 - 0.591/4 1/8 P52742 11 1.18 0.61 - 0.281/4 1/4 P52744 14 1.12 0.57 - 0.495/16 1/8 P52752 11 1.16 0.43 - 0.285/16 1/4 P52754 14 1.12 0.39 - 0.493/8 1/8 P52762 15 1.75 0.65 - 0.453/8 1/4 P52764 15 1.42 0.67 - 0.593/8 3/8 P52766 17 1.42 0.61 - 0.801/2 3/8 P52786 17 1.44 0.37 - 0.901/2 1/2 P52788 21 1.46 0.39 - 1.63

Male Standpipe

A

O.D.

Z

B

E

C

Tube O.D. Z Part A B C D E Fin NPT/UNF Number in mm in in in in oz

1/8 10-32 P55020* 0.16 - 0.33 0.51 0.20 0.63 0.235/32 10-32 P55010* 0.16 - 0.33 0.51 0.20 0.63 0.235/32 1/8 P55012 - 13 0.33 0.73 0.28 0.73 0.721/4 10-32 P55040* 0.16 - 0.43 0.51 0.20 0.75 0.401/4 1/8 P55042 - 13 0.43 0.73 0.28 0.83 0.751/4 1/4 P55044 - 17 0.43 0.89 0.37 0.91 1.411/4 3/8 P55046 - 21 0.43 1.04 0.43 1.12 2.603/8 1/4 P55064 - 17 0.63 0.89 0.37 1.12 2.343/8 3/8 P55066 - 21 0.63 1.04 0.43 1.20 2.37

* with screwdriver slot

Banjo Elbow

D

O.D.FEB

A CZ


1/8 1/8 P57322 11 0.33 0.91 0.75 0.361/8 1/4 P57324 14 0.33 0.93 0.75 0.68

5/32 1/8 P57312 11 0.33 0.91 0.75 0.375/32 1/4 P57314 14 0.33 0.93 0.75 0.691/4 1/8 P57342 11 0.43 1.12 0.93 0.511/4 1/4 P57344 14 0.43 1.08 0.93 0.735/16 1/8 P57352 13 0.53 1.32 1.16 0.735/16 1/4 P57354 14 0.53 1.28 1.16 0.933/8 1/4 P57364 17 0.63 1.41 1.33 1.413/8 3/8 P57366 18 0.63 1.45 1.33 1.73

Extended Male Elbow

C

Z

D

A

O.D.

B

Please see page 46 for our selection of “Plastic Plugs”



Tube O.D. Z Part A B C Din NPT/UNF Number mm in in in oz

1/8 10-32 P57220 8 0.33 0.61 0.57 0.231/8 1/16 P57221 10 0.33 0.61 0.57 0.271/8 1/8 P57222 11 0.33 0.61 0.57 0.331/8 1/4 P57224 14 0.33 0.63 0.57 0.66

5/32 10-32 P57210 8 0.33 0.71 0.55 0.185/32 1/8 P57212 11 0.33 0.61 0.55 0.325/32 1/4 P57214 14 0.33 0.63 0.55 0.653/16 1/8 P57232 11 0.43 0.67 0.85 0.641/4 1/8 P57242 11 0.43 0.67 0.71 0.391/4 1/4 P57244 14 0.43 0.63 0.71 0.561/4 3/8 P57246 18 0.43 0.65 0.71 0.855/16 1/8 P57252 11 0.53 0.87 0.91 0.495/16 1/4 P57254 14 0.53 0.83 0.91 0.665/16 3/8 P57256 18 0.53 0.85 0.91 0.973/8 1/8 P57262 15 0.63 0.99 1.04 0.813/8 1/4 P57264 15 0.63 0.99 1.04 0.883/8 3/8 P57266 18 0.63 0.95 1.04 1.183/8 1/2 P57268 22 0.63 0.98 1.04 1.861/2 1/4 P57284 20 0.87 1.22 1.38 1.881/2 3/8 P57286 20 0.87 1.22 1.38 1.931/2 1/2 P57288 24 0.87 1.12 1.38 2.35


A

C

O.D.

D

BZ

D


1/8 1/8 P57422 13 0.34 0.99 0.37 0.57 1.025/32 1/8 P57412 13 0.33 0.91 0.37 0.55 0.435/32 1/4 P57414 16 0.33 1.08 0.55 0.55 0.741/4 1/8 P57442 13 0.43 1.02 0.37 0.71 0.551/4 1/4 P57444 16 0.43 1.18 0.55 0.71 0.845/16 1/8 P57452 13 0.53 1.24 0.37 0.91 0.665/16 1/4 P57454 16 0.53 1.40 0.55 0.91 1.013/8 1/4 P57464 16 0.63 1.60 0.55 1.04 1.131/2 3/8 P57486 22 0.87 1.88 0.65 1.38 2.94

Female Branch Tee

C

B

O.D.

D

EE

Z

A

Tube O.D. Z Part A B C D Ein NPT/UNF Number mm in in in in oz

1/8 10-32 P57120 8 0.33 0.92 0.35 0.57 0.191/8 1/8 P57122 11 0.33 0.93 0.35 0.57 0.31

5/32 10-32 P57110 8 0.33 1.02 0.45 0.57 0.185/32 1/8 P57112 11 0.33 0.93 0.53 0.57 0.325/32 1/4 P57114 14 0.33 0.94 0.37 0.57 0.643/16 1/8 P57132 11 0.45 1.31 0.45 0.85 0.631/4 1/8 P57142 11 0.43 1.16 0.45 0.69 0.391/4 1/4 P57144 14 0.43 1.12 0.41 0.69 0.581/4 3/8 P57146 18 0.43 1.14 0.43 0.69 0.845/16 1/8 P57152 11 0.53 1.38 0.49 0.91 0.505/16 1/4 P57154 14 0.53 1.34 0.45 0.91 0.695/16 3/8 P57156 18 0.53 1.36 0.47 0.91 0.973/8 1/8 P57162 15 0.63 1.63 0.60 1.04 0.813/8 1/4 P57164 15 0.63 1.63 0.60 1.04 0.813/8 3/8 P57166 18 0.63 1.60 0.55 1.04 1.193/8 1/2 P57168 22 0.63 1.63 0.59 1.04 1.971/2 1/4 P57184 20 0.87 2.17 0.79 1.38 1.851/2 3/8 P57186 20 0.87 2.17 0.79 1.38 1.931/2 1/2 P57188 24 0.87 2.07 0.79 1.38 2.19

Male Swivel Run Tee

C

O.D.

E

BZ

A

D

All of our tubing is always printed with the Nycoil name, material, size and date code foreasy identification. If your tubing doesn’t say “Nycoil”, you’re not getting the best!



Tube O.D. Part A B max C D E min Maxin Number mm in in in in oz Torque

1/8 P58222 13 0.22 0.37 0.61 0.41 0.64 -5/32 P58211 13 0.22 0.59 0.39 0.41 0.67 11 lb. in.1/4 P58244 16 0.35 0.37 0.81 0.53 0.24 13 lb. in.5/16 P58255 18 0.57 0.98 0.53 0.61 1.16 15 lb. in.3/8 P58266 22 0.57 0.51 1.18 0.73 0.65 22 lb. in.1/2 P58288 29 0.81 0.67 1.61 1.00 3.60 -

Bulkhead Union

O.D.

E

CD

B

A

Tube O.D. Part A Bin Number in in oz

1/8 P56522 0.33 0.71 0.115/32 P56511 0.33 0.75 0.073/16 P56533 0.43 1.07 0.551/4 P56544 0.43 0.93 0.155/16 P56555 0.53 1.16 0.253/8 P56566 0.63 1.33 0.411/2 P56588 0.87 1.38 0.65

Union Elbow

O.D.A

B


1/8 1/8 P56622 13 0.43 0.87 0.37 0.481/8 1/4 P56624 16 0.43 1.05 0.55 0.74

5/32 1/8 P56612 13 0.33 0.89 0.37 0.375/32 1/4 P56614 16 0.33 1.06 0.55 0.653/16 1/8 P56632 9/16" - 1.06 - 0.763/16 1/4 P56634 11/16" - 1.26 - 1.011/4 1/8 P56642 13 0.42 0.98 0.37 0.441/4 1/4 P56644 16 0.42 1.16 0.55 0.665/16 1/8 P56652 13 0.53 1.14 0.37 0.555/16 1/4 P56654 16 0.53 1.32 0.55 0.853/8 1/8 P56662 16 0.61 1.22 0.37 0.943/8 1/4 P56664 16 0.61 1.40 0.55 0.943/8 3/8 P56666 22 0.61 1.52 0.65 1.851/2 3/8 P56686 22 0.85 1.81 0.65 3.251/2 1/2 P56688 24 0.85 1.93 0.77 4.02

Female Connector – Nickel Plated Brass

AC

O.D.

Z

B

D

Tube O.D. Tube O.D. Part A B C1 (in) 2 (in) Number in in in oz

1/8 1/4 P56542 0.43 0.93 0.93 0.203/8 1/4 P56564 0.63 1.33 1.30 0.50

Union Reducer Elbow

AC

BO.D.1

O.D.2



Tube O.D. Part A B Cin Number in in in oz

1/8 P56422 0.33 0.75 0.57 0.155/32 P56411 0.33 0.75 0.57 0.143/16 P56433 0.43 1.07 0.85 0.581/4 P56444 0.43 0.89 0.93 0.225/16 P56455 0.53 1.16 0.91 0.323/8 P56466 0.63 1.34 1.02 0.641/2 P56488 0.87 1.81 1.38 1.74

Union Tee


1/8 P56222 0.34 0.97 0.115/32 P56211 0.33 0.98 0.073/16 P56233 0.43 1.44 0.391/4 P56244 0.43 1.16 0.145/16 P56255 0.53 1.50 0.253/8 P56266 0.63 1.65 0.401/2 P56288 0.87 2.17 0.95

Straight Union

A O.D.

B

C

B

C

A O.D.


1/4 1/8 P56442 0.43 0.93 0.73 0.353/8 1/4 P56464 0.63 1.28 1.00 0.651/2 3/8 P56486 0.87 1.81 1.38 0.75

Union Reducer Tee

C

B

C

A O.D.1 O.D.1

O.D.2

Tube O.D. Tube O.D. Part A B1 (in) 2 (in) Number in in oz

1/8 1/4 P56242 0.43 1.32 0.343/8 1/4 P56264 0.63 1.61 0.50

Straight Union Reducer

C

O.D.1 B O.D.2A

For applications involving prolonged exposure to ultraviolet (UV) light, we suggestusing black tubing for extended life.



Tube O.D. Tube O.D. Part A B C D1 (in) 2 (in) Number in in in in oz

1/8 1/8 P54122 0.69 0.33 1.12 0.35 0.165/32 5/32 P54111 0.69 0.34 1.12 0.35 0.141/4 1/4 P54144 0.87 0.43 1.42 0.45 0.245/16 5/16 P54155 1.10 0.53 1.77 0.57 0.463/8 3/8 P54166 1.30 0.63 2.09 0.67 0.59

Y Union

Tube O.D. Tube O.D. Part A B C D E F1 (in) 2 (in) Number in in in in in in oz

5/32 5/32 P54411 1.00 1.20 0.83 0.39 0.33 0.15 0.955/32 1/4 P54414 0.87 1.47 0.43 - - - 0.99

Double Y Union

A

C

D

E E

B

O.D.1O.D.2

F

A

C

O.D.1O.D.2

D

B

Tube O.D. Tube O.D. Part A B C D1 (in) 2 (in) Number in in in in oz

5/32 1/4 P54114 0.87 0.43 1.42 0.45 0.43

Y Union Reducer

A

C

O.D.1O.D.2

D

B

Tube O.D. Tube O.D. Part A B C D E1 (in) 2 (in) Number in in in in in oz

1/4 5/32 P54541 1.04 1.42 2.76 0.43 0.13 0.811/4 1/4 P54544 1.18 1.86 3.12 0.55 0.17 1.005/16 5/32 P54551 0.96 - 2.91 0.45 0.17 1.09

Multiple Tee

CO.D.1

O.D.2

BD

A

D

E

Our Release Tool will get into tight spaces so you can remove the tubing from the fitting without a struggle. See page 47 for details.




5/32 1/8 P54312 11 1.28 0.33 0.69 0.35 0.425/32 1/4 P54314 14 1.30 0.33 0.69 0.35 0.791/4 1/8 P54342 11 1.61 0.43 0.87 0.45 0.591/4 1/4 P54344 14 1.56 0.43 0.87 0.45 0.803/8 1/4 P54364 17 2.24 0.63 1.30 0.67 1.613/8 3/8 P54366 18 2.28 0.63 1.30 0.67 1.94

Y Male

E

A

B

O.D.

Z

D

C


1/8 5/32 P52621 0.43 1.79 0.13 0.281/8 3/16 P52623 0.43 1.79 1.14 0.281/8 1/4 P52624 0.43 1.79 1.22 0.29

5/32 3/16 P52613 0.34 1.48 0.83 0.115/32 1/4 P52614 0.34 1.48 0.91 0.095/32 5/16 P52615 0.34 1.48 0.75 0.145/32 3/8 P52616* 0.40 1.63 0.66 0.393/16 1/4 P52634 0.43 1.79 1.22 0.223/16 5/16 P52635 0.43 1.79 1.06 0.191/4 5/16 P52645 0.43 1.61 0.89 0.121/4 3/8 P52646 0.43 1.61 0.81 0.131/4 1/2 P52648 0.63 1.97 0.98 0.305/16 3/8 P52656 0.53 1.93 1.12 0.215/16 1/2 P52658 0.63 2.01 1.02 0.293/8 1/2 P52668 0.63 2.01 1.04 0.31

* Metal Body

Plug-In Reducer

C

O.D.1

B

O.D.2 A


1/4 1/8 P52642 0.43 1.61 1.16 0.081/4 5/32 P52641 0.43 1.61 1.14 0.111/4 3/16 P52643 0.81 1.61 1.00 0.12

Plug-In Expander

C

O.D.1

B

O.D.2 A


1/8 1/8 P52122 0.33 0.92 0.31 0.64 0.57 0.085/32 5/32 P52111 0.33 0.91 0.24 0.61 0.55 0.115/32 1/4 P52114 0.43 1.08 0.30 0.71 0.71 0.201/4 1/4 P52144 0.43 1.20 0.43 0.83 0.73 0.115/16 5/16 P52155 0.53 1.32 0.32 0.85 0.91 0.14

Plug-In Elbow

B O.D.1

O.D.2

E

D

C

A










5/32 5/32 P52411 0.33 1.30 0.24 0.61 0.57 0.181/4 1/4 P52444 0.43 1.69 0.43 0.83 0.73 0.215/16 5/16 P52455 0.53 1.93 0.32 0.85 0.91 0.28

Plug-In Run Tee

O.D.1

E

CB

O.D.2 D

A


5/32 5/32 P52311 0.33 0.91 0.24 0.61 0.57 0.181/4 1/4 P52344 0.43 0.98 0.43 0.77 0.73 0.185/16 5/16 P52355 0.53 1.32 0.32 0.85 0.91 0.28

Plug-In Branch Tee

E

B

O.D.2 D

CA

O.D.1 E


Composite “Push-In” Tube Fittings Metric size tubing & BSPT threads

Tube O.D. Z Part A B C Dmm BSPT Number mm mm mm mm kg

4 R1/8 P101202 10 3 9.5 11 0.0064 R1/4 P101203 14 3 6.5 15 0.0136 R1/8 P101212 11 4 11.5 11 0.0056 R1/4 P101213 14 4 8.5 15 0.0118 R1/8 P101217 13 5 20 14 0.0118 R1/4 P101218 14 6 17 15 0.0148 R3/8 P101219 17 6 13 18.5 0.02110 R1/4 P101223 16 7 20 17.5 0.01710 R3/8 P101224 17 8 16.5 18.5 0.01910 R1/2 P101225 21 8 14 23 0.03712 R1/4 P101228 19 7 26.5 21 0.02912 R3/8 P101229 19 9 24 21 0.03012 R1/2 P101230 21 9 19.5 23 0.03714 R3/8 P101234 22 9 28.5 24 0.04314 R1/2 P101235 24 10 23.5 26 0.047

Male Connector – Nickel Plated Brass

AC

O.D.

Z


4 R1/8 P102202 10 8.5 13.5 14 0.0064 R1/4 P102203 14 8.5 14 14 0.0146 R1/8 P102212 10 10.5 15.5 16 0.006 6 R1/4 P102213 14 10.5 16 16 0.0158 R1/8 P102217 10 13.5 19 23 0.0138 R1/4 P102218 14 13.5 18 23 0.0158 R3/8 P102219 17 13.5 18 23 0.01810 R1/4 P102223 15 16 22 26.5 0.01610 R3/8 P102224 17 16 22 26.5 0.01910 R1/2 P102225 21 16 22 26.5 0.03112 R1/4 P102228 15 19 25 31 0.07112 R3/8 P102229 17 19 25 31 0.07412 R1/2 P102230 21 19 25 31 0.09214 R3/8 P102234 20 22 30.5 35.5 0.09114 R1/2 P102235 24 22 28.5 35.5 0.095

Male Swivel Elbow

A

C

O.D.BZ

D

Tube O.D. Z Part A B C D E Fmm BSPP/M5 Number mm mm mm mm mm mm kg

4 M5x0.8 P120501* 4 - 8.5 13 5 16 0.0074 G1/8 P120502 4 13 8.5 17 7 18.5 0.0106 G1/8 P120512 4 13 10.5 17 7 20 0.0116 G1/4 P120513 5.5 17 10.5 21 9 22 0.0156 M5x0.8 P120511* 4 - 10.5 13 7 18.5 0.0088 G1/8 P120517 4 13 13.5 16.5 7 25 0.0228 G1/4 P120518 5.5 17 13.5 21 9 27 0.0308 G3/8 P120519 5.5 20 13.5 24.5 11 29 0.04910 G1/4 P120523 5.5 17 16 21 9 29 0.05810 G3/8 P120524 5.5 20 16 24.5 11 31 0.06112 G1/4 P120528 5.5 20 19 21 11.5 34.5 0.06512 G3/8 P120529 5.5 20 19 24.5 11.5 34.5 0.067

* with screwdriver slot

Banjo Elbow

D

O.D.FEB

A CZ

B

D

Nycoil offers Poly-Matic® Nickel Plated Brass Conversion Fittings to connect FractionalInch Size Tubing to machinery or equipment having BSPT connections! See page 20 fordetails of this EXCLUSIVE offering.



Tube O.D. Z Part A B Cmm BSPP/M5 Number mm mm mm kg

4 G1/8 P108502 9.5 13 22.5 0.0104 G1/4 P108503 13.5 16 26.5 0.0164 M5x0.8 P108501 6.5 8 19.5 0.0056 G1/8 P108512 9.5 13 24.5 0.0116 G1/4 P108513 13.5 16 28.5 0.0168 G1/8 P108517 9.5 13 29 0.0208 G1/4 P108518 13.5 16 33 0.02710 G3/8 P108524 14 19 36 0.04012 G3/8 P108529 14 19 40 0.09212 G1/2 P108530 19.5 24 45.5 0.114

Female Connector – Nickel Plated Brass

AC

O.D.

Z

B

D

Tube O.D. Z Part A B C D Emm BSPT Number mm mm mm mm mm kg

4 R1/8 P106202 10 8.5 23.5 9 14.5 0.0074 R1/4 P106203 14 8.5 24 9.5 14.5 0.0106 R1/8 P106212 10 10.5 27.5 10 17.5 0.0096 R1/4 P106213 14 10.5 28 10.5 17.5 0.0178 R1/8 P106217 10 13.5 35 12 23 0.0168 R1/4 P106218 14 13.5 34 11 23 0.0198 R3/8 P106219 17 13.5 34 11 23 0.02010 R1/4 P106223 15 16 40.5 14 26.5 0.02110 R3/8 P106224 17 16 40.5 14 26.5 0.02410 R1/2 P106225 21 16 40.5 14 26.5 0.02812 R1/4 P106228 15 19 46.5 15.5 31 0.09412 R3/8 P106229 17 19 46.5 15.5 31 0.09212 R1/2 P106230 21 19 46.5 15.5 31 0.10914 R3/8 P106234 20 22 55 19.5 35.5 0.11314 R1/2 P106235 24 22 52.5 17.5 35.5 0.114

Male Swivel Run Tee

C

O.D.

E

BZ

A

D


4 R1/8 P107202 10 8.5 15.5 14 0.0074 R1/4 P107203 14 8.5 16 14 0.0156 R1/8 P107212 10 10.5 17.5 16 0.0096 R1/4 P107213 14 10.5 18 16 0.0178 R1/8 P107217 10 13.5 22 23 0.0168 R1/4 P107218 14 13.5 21 23 0.0198 R3/8 P107219 17 13.5 21 23 0.02010 R1/4 P107223 15 16 24 26.5 0.02110 R3/8 P107224 17 16 24 26.5 0.02410 R1/2 P107225 21 16 24 26.5 0.02812 R1/4 P107228 15 19 27 31 0.09412 R3/8 P107229 17 19 27 31 0.09212 R1/2 P107230 21 19 27 31 0.10914 R3/8 P107234 20 22 30.5 35.5 0.11314 R1/2 P107235 24 22 28.5 35.5 0.114


A

C

O.D.

D

BZ

D

Our Spiral Wrap will keep the tubes bundled together without cluttering up your circuit. See page 47 for details.



Tube O.D. Part A Bmm Number mm mm kg

4 P104250 8.5 19 0.0026 P104263 10.5 22.5 0.0048 P104268 13.5 29.5 0.00710 P104272 16 34.5 0.01512 P104275 19 40.5 0.01714 P104277 22 46.5 0.045

Union Elbow

O.D.A

B

Tube O.D. Part A B Cmm Number mm mm mm kg

4 P105250 8.5 19 14.5 0.0046 P105263 10.5 22.5 17.5 0.0068 P105268 13.5 29.5 23 0.00910 P105272 16 34.5 26.5 0.01412 P105275 19 40.5 31 0.01914 P105277 22 46 35.5 0.067

Union Tee

C

B

C

A O.D.

Tube O.D. Part A B max C D E minmm Number mm mm mm mm mm kg

4 P110250 13 5.5 15 10 10.5 0.0186 P110263 15 8.5 18 10.5 12.5 0.0298 P110268 18 14.5 25 13.5 15.5 0.03710 P110272 22 14.5 27.5 15.5 18.5 0.08412 P110275 26 18.5 33 18 22.5 0.10214 P110277 29 20.5 37.5 20.5 25.5 0.135

Bulkhead Union

O.D.

E

CD

B

A

Tube O.D. Tube O.D. Part A B C1 (mm) 2 (mm) Number mm mm mm kg

4 6 P105252 10.5 22.5 17.5 0.0066 4 P105286 10.5 22.5 17.5 0.0066 8 P105264 13.5 29.5 23 0.0098 6 P105288 13.5 29.5 23 0.009

Union Reducer Tee

C

B

C

A O.D.1 O.D.1

O.D.2

Tubing should be cut clean and straight for a leak free connection to “Push-In”Fittings. Our Tubing & Hose Cutter assures that you get a perfect cut every time without altering the tubing…and it’s easy to use! See page 47 for details.



Tube O.D. Tube O.D. Part A B C D1 (mm) 2 (mm) Number mm mm mm mm kg

4 4 P115250 17.5 8.5 28.5 9 0.0046 6 P115263 21.5 10.5 35 11 0.0078 8 P115268 28 13.5 45 14.5 0.01310 10 P115272 33 16 53 17 0.020

Y Union

A

C

O.D.1O.D.2

D

B

Tube O.D. Part A Bmm Number mm mm kg

4 P109250 8.5 25 0.0026 P109263 10.5 28.5 0.0048 P109268 13.5 38 0.00710 P109272 16 42 0.00912 P109275 19 50.5 0.01514 P109277 22 56 0.043

Straight Union

A O.D.

B


4 6 P109252 8.5 11 28 0.0084 8 P109253 13.5 13.5 38 0.0106 8 P109264 13.5 13.5 38 0.0126 10 P109265 16 16 42 0.0188 10 P109269 16 16 42 0.020

Straight Union Reducer

C

O.D.1 B O.D.2A

Tube O.D. Tube O.D. Part A B C D1 (mm) 2 (mm) Number mm mm mm mm kg

4 6 P115252 17.5 10.5 33 9 0.0056 8 P115264 22.5 13.5 41 11.5 0.0198 10 P115269 28 16 47 14.5 0.015

Y Union Reducer

A

C

O.D.1O.D.2

D

B

Due to its higher working pressure, Nylon Tubing with a smaller outside diameter andbetter flow characteristics than Polyurethane Tubing can be used in many applications.This results in saving costs as well as space. See page 6 for a complete explanation.



Tube O.D. Tube O.D. Part A B C D E1 (mm) 2 (mm) Number mm mm mm mm mm kg

6 4 P118286 24.5 23 74 11.5 4.2 0.0238 4 P118287 24.5 23 74 11.5 4.2 0.0318 6 P118288 24.5 23 74 11.5 4.2 0.03310 6 P118290 36 29 81 14.5 4.2 0.05810 8 P118291 36 29 81 14.5 4.2 0.060

Multiple Tee

CO.D.1

O.D.2

BD

A

D

E

Tube O.D. Tube O.D. Part A B C D E F1 (mm) 2 (mm) Number mm mm mm mm mm mm kg

4 6 P117252 25.5 30.5 21 10 8.5 3.7 0.0276 6 P117263 31.5 37.5 26.5 12 10 3.7 0.0436 8 P117264 31.5 38 26.5 12 10 3.7 0.045

Double Y Union

A

C

D

E E

Tube O.D. Z Part A B C D Emm BSPT Number mm mm mm mm mm kg

4 R1/8 P116202 10 32.5 8.5 17.5 9 0.0104 R1/4 P116203 14 33 8.5 17.5 9 0.0186 R1/8 P116212 10 39.5 10.5 21.5 11 0.0126 R1/4 P116213 14 40 10.5 21.5 11 0.0198 R1/8 P116217 13 56.5 13.5 28 14.5 0.0338 R1/4 P116218 14 55.5 13.5 28 14.5 0.037

Y Male

E

A

B

O.D.

Z


4 6 P124252 8.5 37.5 23.5 0.0044 8 P124253 8.5 37.5 19 0.0044 10 P124254 12 44 22.5 0.0056 8 P124264 10.5 37.5 20 0.0046 10 P124265 10.5 38 17.5 0.0066 12 P124266 14.5 46 23 0.0076 14 P124267 14.5 48 23 0.0088 10 P124269 13.5 49 28.5 0.0098 12 P124270 13.5 49 24.5 0.0108 14 P124271 17 48 23 0.01010 12 P124273 21.5 56.5 33.5 0.01910 14 P124274 21.5 58.5 33.5 0.02012 14 P124276 23.5 58.5 33.5 0.023

Plug-In Reducer

C

O.D.1

B

O.D.2 A

D

C

B

O.D.1O.D.2

F

Not all tubing and fittings can be used on Department Of Transportation (D.O.T.) applications. Nycoil offers Nylon Air Brake Tubing that complies with SAE J844 as wellas a line of Poly-Matic® Nickel Plated Brass Push-In Fittings that meet FMVSS 571.106air brake specifications. For complete details and ordering information, see page 8 forour Nylon Air Brake Tubing and pages 25 – 27 for our Poly-Matic® D.O.T. Fittings.


Flow Controls, Needle Valves & Check Valves

A B

The compact body size of our Flow Control Valves makesthem ideal for small circuits where space is limited. Our highly sensitive adjusting screw allows fine settings to meetthe precise demands of any application. The locking nut will

accurately hold the required setting even under high vibrationconditions. “Push-In” connections allow easy and quickconnections to or disconnections from Nylon, Polyethyleneand 95A Durometer Polyurethane Tubing.

Meter OutVersion

non-returnvalve

fine adjustment screw

lock nut

non-returnvalve


lock nut

Meter InVersion


lock nut

Bi-DirectionalVersion C

Flow Controls

Tube O.D. Part A B max Cin NPT Number in in in

5/32 1/8 82012 1.05 0.75 1.255/32 1/4 82014 1.17 0.75 1.371/4 1/8 82042 1.05 0.75 1.301/4 1/4 82044 1.17 0.75 1.401/4 3/8 82046 1.38 0.92 1.753/8 1/4 82064 1.34 0.92 1.703/8 3/8 82066 1.38 0.92 1.75

Knob Adjustable Flow Control – Meter Out

C

A

B

5/32 1/8 82112 1.05 0.20 1.255/32 1/4 82114 1.17 0.20 1.371/4 1/8 82142 1.05 0.20 1.301/4 1/4 82144 1.17 0.20 1.401/4 3/8 82146 1.38 0.28 1.753/8 1/4 82164 1.34 0.28 1.703/8 3/8 82166 1.38 0.28 1.75


Screw Adjustable Flow Control – Meter Out

C

A

B

Many Nylon compounds absorb moisture that can change the tubing’s dimensions and lessen its strength, leading to premature failure. Nycoil uses only the high qualityNylon 12 compound because of its low moisture absorption characteristics, making itthe best choice for most tubing applications.


Flow Controls

5/32 5/32 82211 1.45 0.87 1.351/4 1/4 82244 1.48 0.87 1.38


Panel / Bracket Mount Flow Control – Meter Out

C

A

B


1/4 1/8 82442 1.05 0.75 1.301/4 1/4 82444 1.17 0.75 1.403/8 1/4 82464 1.34 0.92 1.703/8 3/8 82466 1.38 0.92 1.75

Knob Adjustable Flow Control – Meter In

C

A

B


1/4 1/8 82342 1.05 0.20 1.301/4 1/4 82344 1.17 0.20 1.403/8 1/4 82364 1.34 0.28 1.703/8 3/8 82366 1.38 0.28 1.75

Screw Adjustable Flow Control – Meter In

C

A

B

Tube O.D. Z Part A B min B max C Din NPT/UNF Number mm in in in in oz

1/8 10-32 86020 6 0.91 1.14 0.35 0.67 0.231/8 1/8 86022 7 1.26 1.41 0.45 0.69 0.42

5/32 10-32 86010 6 0.93 1.02 0.35 0.67 0.235/32 1/8 86012 7 1.06 1.16 0.45 0.71 0.461/4 10-32 86040 6 0.93 1.02 0.35 0.73 0.251/4 1/8 86042 7 1.06 1.16 0.45 0.75 0.641/4 1/4 86044 8 1.18 1.28 0.47 0.77 0.79

Mini Knob Adjustable Flow Control – Meter Out

O.D.

Z

D

B

A

C

Our Poly-Matic® gripping teeth are available as cartridges for easy installation intomolded, forged, cast or machined components that will be connected to tubing. See page 19 for complete details and ordering information.


Flow Controls

Tube O.D. Z Part A B C D Ein NPT/UNF Number mm in in in in oz

1/8 10-32 86120 6 0.35 0.79 0.65 0.65 0.181/8 1/8 86122 6 0.45 0.85 0.71 0.71 0.25

5/32 10-32 86110 6 0.35 0.79 0.65 0.65 0.185/32 1/8 86112 6 0.45 0.85 0.71 0.71 0.371/4 10-32 86140 6 0.35 0.79 0.65 0.65 0.201/4 1/8 86142 6 0.45 0.85 0.71 0.73 1.981/4 1/4 86144 6 0.53 0.97 0.83 0.73 3.23

Mini Screw Adjustable Flow Control – Meter Out

O.D.

Z

E

C

A

B

D

Tube O.D. Z Part A B min B max C Dmm BSPP/Metric Number mm mm mm mm mm kg

4 M5x0.8 P182201 6 23.5 26 9 17 0.0086 M5x0.8 P182211 6 23.5 26 9 18 0.0106 G1/8 P182212 7 27 29.5 11.5 18.5 0.0126 G1/4 P182213 8 30 32.5 12 19 0.0198 G1/8 P182217 13 26.5 31 14 26 0.0208 G1/4 P182218 16 29 34 19 27.5 0.022

Mini Knob Adjustable Flow Control – Meter In (BSPP & M5)

O.D.

Z

D

B

A

C

Tube O.D. Z Part A B min B max C Dmm BSPP/Metric Number mm mm mm mm mm kg

4 M5x0.8 P180201 6 23.5 26 9 17 0.0084 G1/8 P180202 7 27 29.5 11.5 18 0.0126 M5x0.8 P180211 6 23.5 26 9 18 0.0106 G1/8 P180212 7 27 29.5 11.5 18.5 0.0126 G1/4 P180213 8 30 32.5 12 19 0.0198 G1/8 P180217 13 26.5 31 14 26 0.0208 G1/4 P180218 16 29 34 19 27.5 0.022

Mini Knob Adjustable Flow Control – Meter Out (BSPP & M5)

O.D.

Z

D

B

A

C

Tube O.D. Z Part A B min B max C Din NPT/UNF Number mm in in in in oz

5/32 10-32 86310 6 0.93 1.02 0.35 0.67 0.235/32 1/8 86312 7 1.06 1.16 0.45 0.71 0.461/4 1/8 86342 7 1.06 1.16 0.45 0.75 0.641/4 1/4 86344 8 1.18 1.28 0.47 0.77 0.79

Mini Knob Adjustable Flow Control – Meter In

O.D.

Z

D

B

A

C

Nycoil offers Poly-Matic® Nickel Plated Brass as well as Composite (Glass Reinforced Nylon) Push-In Fittings to satisfy most application requirements.Nycoil...A Fitting Choice!


Flow Controls, Needle Valves & Check Valves

Tube O.D. Part B Cmin Cmax D E F G1 G2 Hin Number min mm in in in in in in in in oz

5/32 83011 0.12 5 1.15 1.31 0.47 1.52 0.59 0.31 0.43 0.09 0.421/4 83044 0.16 8 1.54 1.74 0.66 2.00 0.90 0.43 0.66 0.12 1.065/16 83055 0.24 11 1.73 1.97 0.73 2.38 1.02 0.49 0.79 0.13 1.663/8 83066 0.31 14 2.03 2.38 0.94 2.87 1.29 0.62 1.01 0.16 4.061/2 83088 0.39 14 2.24 2.63 1.09 3.35 1.37 0.78 1.07 0.16 5.56

May be stacked with supplied joining clips or mounted using through holes.

In-Line Flow Control

O.D.

C

B

G2

FE

G1 H

DD

D

DN

Tube O.D. Z Part A B C Dmin Dmax E F G Hin NPT Number in in in in in in in in in oz

5/32 1/8 83212 0.63 0.39 0.43 1.44 1.67 0.69 0.85 0.59 0.79 0.791/4 1/8 83242 0.63 0.39 0.43 1.44 1.67 0.69 0.85 0.59 0.79 0.791/4 1/4 83244 0.63 0.39 0.43 1.44 1.67 0.69 0.85 0.59 0.79 0.79

Bi-Directional Flow Regulator – Needle Valve

O.D.

Z

E

G

F

HD

A

B

C


5/32 83411 0.63 1.52 0.281/4 83444 0.63 1.61 0.515/16 83455 0.75 2.03 0.63

Nylon and Nickel Plated Brass Body

In-Line Check Valve

A O.D.

B

O.D.

Most hoses (Neoprene, Rubber, Thermoplastic, Nitrile, EPDM, etc.) consist of an innertube, braiding and an outer cover that are in some way attached together. During normal use, these three layers can become separated and compromise the integrity of the hose. As a result, hose manufacturers generally use a 4:1 safety factor when calculating the working pressure of their hose. Tubing (Nylon, Polyethylene,Polyurethane, etc.), on the other hand, is extruded as a single piece and does not havemultiple layers that can break down and weaken over time. This has allowed a 3:1safety factor to become the standard for establishing the working pressure of tubing.


Accessories

Overall Part Release Color CodeDiameter Number Collar Suffix Key

0.44 5001– 1/8, 5/32, 4mm 0 = White0.56 5004– 1/4, 6mm 1 = Black0.75 5006– 3/8, 10mm 2 = Red

3 = Blue4 = Green5 = Yellow

Add Color Code to part numbers. If no Code is added, (0) White Color Cap will be supplied. Note: These caps cannot be used with composite fittings.

Plastic Color Caps For Poly-Matic Fittings

1/8 52620 1.18 0.38 - -5/32 52610 1.18 0.38 - -3/16 P52630 1.36 0.27 0.79 0.061/4 52640 1.21 0.50 - -5/16 52650 1.56 0.69 - -3/8 52660 1.56 0.69 - -1/2 52680 1.56 0.69 - -

Plastic Plug

C

B

A

O.D.

Tube O.D. Part A B Cin Number in in in oz

4 52610 1.18 0.38 - -6 52606 1.20 0.50 - -8 52650 1.21 0.50 - -10 52611 1.56 0.69 - -12 52612 1.56 0.69 - -14 P52617 49mm 16mm 23.5 0.005

Plastic Plug

C

B

A

O.D.

Tube O.D. Part A B Cmm Number in in mm oz

Polyurethane Tubing will expand when exposed to prolonged temperatures over 80ºFand, due to its memory, may not contract fully back to its original dimensions whencooled. This could cause a problem reconnecting the tubing and fitting. An alternativetubing material with more dimensional stability, such as Nylon, should be consideredfor applications involving exposure to heat.


Accessories

PartNumber

Tube Cutter 60001Replacement Blades 60004 (10 Pack)Replacement Blades 60005 (5 Pack)

Tube Cutter

PartNumber

Release Tool 60002

Release Tool NEW!

NEW!

Exclusive “positive stop” handle makes it easy to hold the cutter in the open position

Specially angled handle (not just enlarged ends) allow a firm grip, minimizing the possibility of it accidentally “flying” out of the user’s hand

Large, ribbed handle further adds to the secure, yet comfortable, grip

Rugged construction and ergonomic design combine to permit cutting up to 3/4" tubing or hose with minimum effort

Corrosion resistant hardened steel blade assures straight, crisp cuts for optimum fitting connection

Replacement blades can be installed in seconds using only a screwdriver

Provision for leash attachment conveniently located on both sides of the handle – will not interfere with cutter operation

Permanently engraved “WARNING” prominently displayed in handle reminds users to work safely

O.D. Wall Part Bundlein Thickness (in) Number Range (in) Length Color

1/4 0.040 60020 3/16 - 2 25' (bag) Natural1/2 0.062 60022 3/8 - 4 25' (bag) Natural1/2 0.062 60023 3/8 - 4 25' (bag) Black

Note: Up to 1000' lengths available upon request–please consult the factory

Spiral Wrap NEW!

Spiral Wrap is Polyethylene Tubing that is specially cut toexpand and contain multiple runs of small diameter tubing or wiring neat and tangle free. Spiral Wrap also acts as aprotective jacket to prevent abrasion or damage from othersources in the surrounding area. The special angled cut of the tubing is rounded so that it can be easily and safely

wrapped around a bundle of tubes or wires without cutting the contents. Spiral Wrap is available with a 1/4"outside diameter to accommodate 3/16" to 2" bundles andwith a 1/2" outside diameter for 3/8" to 4" bundles.

Colors are Natural and Black (UV Resistant).

Our Release Tool allows you to depress the release collar todisconnect the tubing from “Push-In” Fittings where limitedspace makes it difficult to reach with your fingers.

The “V” shaped tool end accommodates multiple tubing sizes and acts as a guide for correct placement against the fitting release collar.

Acetaldehyde S L U L U U

Acetic Acid (glacial) L S U U L U

Acetic Anhydride L S U S U U

Acetone S S U U S U

Acetylene S S U S S NT

Air - Compressed S S S S S S

Alcohol - Amyl S S U L S U

Alcohol - Benzyl U L U U NT U

Alcohol - Butyl L S U S S U

Alcohol - Ethyl S S U S S U

Alcohol - Isopropyl S S U S S U

Alcohol - Methyl S S U L S U

Aluminum Salts S S S S L NT

Ammonia - Aqueous S S S S U NT

Ammonia - Gas S S L S L S

Ammonium Salts S S S S U L

Amyl Acetate L L NT U S NT

Anethole S NT NT NT NT NT

Aniline L L U U L U

Aqua Regia U L U U U NT

Arsenic Acid NT S L NT NT NT

Asphalt S S S NT S NT

Barium Salts S S S NT L U

Beer S S S S L NT

Benzaldehyde L L U U S U

Benzene S L U U S U

Benzoic Acid L NT NT U L U

Borax S S S L L NT

Boric Acid S S S S L U

Brake Fluid S S U U S U

Bromine U NT U U U NT

Butane S L S U S NT

Butter S S S S S NT

Buttermilk S S S NT U NT

Butyl Acetate S NT U NT S U

Calcium Chloride U NT NT NT NT NT

- Alcohol Solution

Calcium Salts - Aqueous S S S S L L

Carbon Dioxide S L S NT S NT

Carbon Disulfide S L L U S NT

Carbon Tetrachloride L S U U S U

Chlorine - Dry U U U U S U

Chlorine - Wet L L U U U NT

Chloroacetic Acid U NT NT NT U NT

Chloroform U U U U L U

Chromic Acid U S U U U NT

Cider S S NT S NT NT

Citric Acid S S S S L S

Copper Salts S S S S U NT

Creosote S S NT L S U

Cresol U L U U NT NT

Cyclohexane S S S S L NT

Cyclohexanone S L U U NT NT

Diammonium Phosphate S S NT NT NT NT

Diesel Fuel S S L S S NT

Diethanolamine S NT NT NT S U

Diethyl Ether S S S U S U

Dioctyl Phthalate S L S U NT NT

Dioxane S NT U U NT NT

Ethane S S L S S NT

Ether S S U NT S NT

Ethyl Acetate S L U U S NT

Ethylene NT NT NT S S NT

Ethylene Chlorhydrin U NT NT U NT NT

Ethylene Chloride L L L U L NT

Ethylene Glycol S S S S S U

Ethylene Oxide S L NT U U NT

Fatty Acid Esters S NT S NT NT NT

Fatty Acids S L NT NT L U

Ferric Chloride S S S S U NT

Fluorine U U U U U NT

Formaldehyde L S U S S U

Formic Acid U S U U L NT

Freon S L U L S S

Fruit Juices S S S S U NT

Furfuryl Alcohol S S NT U S U

Gas - Coal S S NT NT NT NT

Gasoline S L U S S L

Glucose S S S S S NT

Glycerine S S S S S S

Glycols - General S S L S S NT

Greases - General S S S S S NT

Greases - Lithium S S U S S NT

Heptane S L L L S S

Hexane S NT L S S NT

Hydrobromic Acid NT NT NT U U NT


Chemical Resistance Chart

Chemical N PE PU BN BR C Chemical N PE PU BN BR C

Material Code: N - Nylon PE - Polyethylene PU - Polyurethane BN - Buna N BR - Brass C - Composite

Hydrochloric Acid L S L U U U

Hydrofluoric Acid U L U U U U

Hydrogen - Gas S S NT S S U

Hydrogen Peroxide U S L U L NT

Isocyanates S NT S NT NT NT

Kerosene S L L S S S

Lactic Acid S S S S L U

Linseed Cake S L L L NT NT

Magnesium Salts S S S S L U

Mercury S S S S U NT

Mercury Salts S S S S U NT

Methane S NT L S S NT

Methyl Acetate S S U U NT NT

Methyl Bromide S L NT L NT NT

Methyl Chloride S L U U S NT

Methyl Sulfate S NT NT NT NT NT

Methylethylketone S L U U S U

(MEK)

Methylisobutylketone S L U U S NT

(MIBK)

Milk S S L S L NT

Mustard S S NT S NT NT

Naptha S S S S S NT

Napthalene S L L U S U

Nickel Salts S S S S U U

Nitric Acid U L U U U U

Nitrobenzene L NT U U L NT

Oil - Animal/Lard S S S S S S

Oil - Mineral S S L S S S

Oil - Vegetable/Seed S S L S S S

Oleic Acid S L L S L U

Oxalic Acid S S S L L U

Oxygen S S S U S NT

Ozone L L NT U NT NT

Perchloric Acid NT NT U NT U NT

Perchloroethylene S L U L L U

Phenol (Carbolic Acid) U S NT U S U

Phosphoric Acid L S U U U U

Picric Acid S L L S U NT

Potassium Hydroxide S S L L U NT

Potassium Permanganate U S NT NT L NT

Potassium Salts S S S S U NT

Propane S S L S S NT

Pydraul F9 S U U U S NT

Pyridene S S L U S U

Silver Salts S S S S U NT

Soap - Aqueous S S S S S NT

Sodium Hydroxide S S L S U NT

Sodium Hypochlorite L S U L U U

Sodium Salts S S S S L U

Stearin S S NT NT NT NT

Styrene S NT S L S NT

Sucrose S S NT S NT NT

Sulfur Dioxide U S NT U U U

Sulfuric Acid U L L U U U

Sulfuric Anhydride U L L U U NT

Tannic Acid S S S S L NT

Tartaric Acid S S S S L NT

Tetrachloroethylene L L U L S NT

Tetrahydrofuran NT S U U NT NT

Toluene S S U L S U

Tributyl Phosphate S NT U U NT NT

Trichloroethane L L U U NT NT

Trichloroethylene L L L L L U

Tricresyl Phosphate S L L U L NT

Trisodium Phosphate S S S NT NT NT

Turpentine S L L S S U

Urea S S S NT NT NT

Uric Acid S S NT NT NT NT

Vinegar S S U L L NT

Water - Fresh S S S S L S

Water - Sea S S S S L U

Water - Soda S S NT NT NT NT

Whiskey/Spirits S S S S L NT

Wine S S S S L NT

Xylene S S L U S U

Zinc Chloride S S S S L U


Chemical Resistance Chart

Chemical N PE PU BN BR C Chemical N PE PU BN BR C

The data on this chart is meant as a guide only. Higher or lower temperatures, chemical concentration and other conditions can bring about different results. In-plant tests are the best way to be sure which tubing is best for a particular application.

Chemical Resistance Code: S - Satisfactory L - Limited U - Unsatisfactory NT - Not Tested


Tubing Specifications

Tube O.D. Tube I.D. Wall Tolerance Tolerance Min. Bend Weight / Working Burst PSI Workingin in in O.D.( in) Wall ( in) Radius ( in) 1000' (lbs) PSI @ 68ºF @ 68ºF PSI @ 125ºF

1/8 0.080 0.023 +.002/-.003 +.002/-.002 1/4 3.3 500 1500 3501/8 0.093 0.016 +.002/-.003 +.002/-.002 1/2 2.5 267 800 187

5/32 0.106 0.025 +.002/-.003 +.002/-.002 5/8 4.8 333 1000 2333/16 0.137 0.025 +.003/-.003 +.002/-.002 3/4 5.8 267 800 1871/4 0.180 0.035 +.002/-.004 +.002/-.002 7/8 10.9 333 1000 2331/4 0.125 0.062 +.002/-.004 +.002/-.002 1-1/4 16.9 667 2000 4671/4 0.170 0.040 +.002/-.004 +.002/-.002 7/8 12.2 400 1200 2805/16 0.232 0.040 +.003/-.003 +.002/-.002 1 15.7 333 1000 2333/8 0.275 0.050 +.002/-.006 +.003/-.003 1-1/4 23.3 333 1000 2331/2 0.375 0.062 +.002/-.006 +.003/-.003 2-1/4 39 267 800 187

Nylon Fractional Inch Tubing


1/4 0.170 0.040 +.002/-.004 +.003/-.003 3/4 10.9 167 500 1075/16 0.190 0.062 +.003/-.003 +.003/-.003 5/8 20.2 200 600 1283/8 0.250 0.062 +.002/-.006 +.004/-.004 1-1/8 25.3 167 500 1071/2 0.375 0.062 +.002/-.006 +.004/-.004 2-1/8 35.5 133 400 85

Polyethylene Fractional Inch Tubing

4mm 2.7mm 0.65mm +0.05/-0.10mm +0.05/-0.10mm 24mm 4.9 367 1100 2574mm 2mm 1mm +0.05/-0.10mm +0.05/-0.10mm 24mm 6.8 667 2000 4675mm 3mm 1mm +0.05/-0.10mm +0.05/-0.10mm 30mm 9 500 1500 3506mm 4mm 1mm +0.05/-0.10mm +0.05/-0.10mm 36mm 11.2 400 1200 2808mm 6mm 1mm +0.05/-0.10mm +0.05/-0.10mm 48mm 15.8 283 850 19810mm 8mm 1mm +0.10/-0.10mm +0.05/-0.10mm 60mm 20.2 200 600 14010mm 7.5mm 1.25mm +0.10/-0.10mm +0.05/-0.10mm 70mm 24.6 267 800 18712mm 9.5mm 1.25mm +0.10/-0.10mm +0.05/-0.10mm 70mm 30.1 233 700 16314mm 12mm 1mm +0.10/-0.10mm +0.05/-0.10mm 100mm 29.1 133 400 93


Nylon Metric Tubing


4mm 2.5mm 0.75mm +0.05/-0.10mm +0.05/-0.10mm 12mm 5 200 600 1286mm 4mm 1mm +0.05/-0.10mm +0.05/-0.10mm 36mm 10.2 167 500 1078mm 6mm 1mm +0.05/-0.10mm +0.05/-0.10mm 48mm 14.2 117 350 7510mm 8mm 1mm +0.05/-0.10mm +0.05/-0.10mm 60mm 18.3 83 250 53

Polyethylene Metric Tubing





Tubing Specifications


1/8 0.062 0.031 +.005/-.005 +.003/-.003 1/4 4.7 267 800 1605/32 0.093 0.031 +.005/-.005 +.003/-.003 3/8 6.2 167 500 1003/16 0.107 0.040 +.005/-.005 +.003/-.003 3/8 10 200 600 1201/4 0.170 0.040 +.005/-.005 +.003/-.005 1/2 13.6 133 400 801/4 0.125 0.062 +.005/-.005 +.003/-.003 3/4 18.8 267 800 1603/8 0.250 0.062 +.005/-.005 +.003/-.003 1 21.3 133 400 801/2 0.320 0.090 +.005/-.005 +.004/-.004 2 59.6 150 450 90

95A Polyurethane Fractional Inch Tubing


1/8 0.062 0.031 +.005/-.005 +.003/-.003 1/4 4.5 150 450 905/32 0.093 0.031 +.005/-.005 +.003/-.003 3/8 6.1 125 375 751/4 0.125 0.062 +.005/-.005 +.003/-.003 3/4 18.3 150 450 90


Tube O.D. Tube I.D. Wall Tolerance Tolerance Min. Bend Weight / Working Burst PSI Workingin in in O.D.( in) Wall ( in) Radius ( in) 1000' (lbs) PSI @ 75ºF @ 75ºF PSI @ 125ºF Type

1/8 0.08 0.023 +.003/-.003 +.003/-.003 0.37 6.5 150 1000 150 3A5/32 0.076 0.040 +.003/-.003 +.003/-.003 1.00 6.5 150 1600 150 3A3/16 0.117 0.035 +.003/-.003 +.003/-.003 1.00 7.5 150 1000 150 3A1/4 0.17 0.040 +.003/-.003 +.003/-.003 1.00 11.9 150 1200 150 3A5/16 0.232 0.04 +.004/-.004 +.004/-.004 1.25 15.4 150 1000 150 3A3/8 0.250 0.062 +.004/-.004 +.004/-.004 1.50 27.5 150 1400 150 3B1/2 0.375 0.062 +.005/-.005 +.004/-.004 2.00 38.5 150 950 150 3B5/8 0.440 0.092 +.005/-.005 +.005/-.005 2.50 69.5 150 900 150 3B3/4 0.566 0.092 +.005/-.005 +.005/-.005 3.00 85.8 150 800 150 3B

Nylon Air Brake Tubing


4mm 2.5mm 0.75mm +0.10/-0.10mm +0.10/-0.10mm 12mm 6 167 500 1005mm 3mm 1mm +0.10/-0.10mm +0.10/-0.10mm 15mm 10.1 167 500 1006mm 4mm 1mm +0.10/-0.10mm +0.10/-0.10mm 18mm 12.6 133 400 808mm 6mm 1mm +0.15/-0.15mm +0.10/-0.10mm 24mm 17.6 97 290 5810mm 6.5mm 1.75mm +0.15/-0.15mm +0.10/-0.10mm 25mm 36.1 150 450 9012mm 9mm 1.5mm +0.15/-0.15mm +0.10/-0.10mm 48mm 39.5 97 290 58

95A Polyurethane Metric Tubing




Documents

Nycoil Catalog 11-13[b]nopakcanada.com/pdf/NYCOIL-FluidPowerProducts.pdf · Nycoil offers a specially formulated Nylon tubing with a 1/8" outside diameter and a 0.023" wall (500 PSI