Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
tures of the original. The first release willstill be based on the internal ROMAFOTdata format; subsequent future releaseswill work on MIDAS images directly andwill use the table file system for thestorage of the extracted parameters.
In the new release the plot packagewill be upgraded by adding the possibility of specifying the formats of the axistick labels. In addition, a commandPLOT/GRAY is now implemented wh ichallows the production of gray scale plotson all graphic devices supported. The88JAN 15 release of MIDAS will use theAGL version 2.1.4.
A new context has been included incollaboration with M. Pierre. The context, in this preliminary version, containsthree commands to model interstellarlines.
Work on the reduction and analysis ofIRSPEC data is in progress.
2. Manual
As the MIDAS manual has now outgrown its present folder, it has beendecided to split it into two volumes. Thefirst volume will contain a description of
NTT StatusM. TARENGHI, ESO
Work on the ND telescope is progressing at full speed both in Europeand on its location at La Silla. DuringSeptember and October this year therewas extensive preparation of the groundand roads on La Silla. Civil engineeringWork began on the small hili next to the3.6-m telescope at the place which wasused during the past years for the Geneva Observatory Telescope. About3000 m3 of earth was removed bymeans of a sequence of minor and finelyControlled dynamite explosions. Figure 1 shows the Chilean workers in theprocess of checking the locations of 28
Figure 1.
the MIDAS system including systemcommands, syntax, data structures andgeneral applications. It will also give thefull help text of all available commands.The second volume will deal with datareduction using MIDAS. There will bechapters describing the general reduction of different types of astronomicaldata and several appendices each devoted to a specific ESO instrument.
3. Measuring Machines
The upgrade of the OPTRONICSmeasuring machine with a high speedscanning is in progress. The problemsassociated with the reticon array weresolved and it is now possible to digitizeand calibrate its 256 elements in approximately 20 msec. The main limitation on the speed is the MC 68010 processor which does the dark current andflat field corrections. Due to significantdelays in the delivery of disk drives andnetwork equipment it is unfortunatelynot yet possible to offer the scan modeto users. We expect to switch to the newmicroprocessor control system in thespring of 1988 and offer the scanning
explosions. The picture also shows theirprecautions to avoid excessive damageto the surrounding area. Large lorrytyres are placed on the ground and astrong metallic net is used as a protective cover. Figure 2 shows the explosionsome minutes later. The smoke on thetop of the hili indicates the future location of the ND.
Following the excavation work thetask of ensuring a flat surface began andabulIdozer opened the way for the 3access roads foreseen in the project.Figure 3, taken on 28 October 1987,shows the subsequent preparation of
Figure 2.
mode to visitors in the summer.After reviewing the usage of the
GRANT machine it has been decided todiscontinue its operation as of August1988. After this date, measurement ofcoude spectra must be done on theOPTRONICS machine. Those who wantto use the GRANT machine are stronglyencouraged to arrange for time as soonas possible.
4. MIDAS Hot-Une Service
The following MIDAS Support services can be used in case of problemsto obtain fast help:
• EARN: MIDAS DGAES051• SPAN: ESOMC1 ::MIDAS• Tlx.: 52828222 eso d, attn.: MIDAS
HOT-UNE• Tel.: +49-89-32006-456
Also, users are invited to send us anysuggestions or comments. Although atelephone service is provided, we preferthat requests are submitted in writtenform through either electronic networksor telex. This makes it easier for us toprocess the requests properly.
the concrete slab upon which the NDwill stand.
The civil engineering work is expectedto be completed in February 1988. In themeantime construction of the rotatingbuilding has been completed in Europeand it will be shipped to Chile during thecourse of the next weeks. The unconventional shape of the building optimallycombines the highest thermo-fluid dynamic demands resulting in greater protection of the telescope without introducing a dome seeing component.
The rotating building was conceivedby F. Franza and W. Bauersachs at ESO
51
Figure 3.
and the design and manufacture wasthe result of a consortium of Italiancompanies (MECNAFER, Marghera;ZOLLET, Belluno; ANSALDO Componenti, Genova) in close cooperationwith a number of European industries,one of which is RKS France who manufactured a roller bearing of 7 m diameter which will be the key unit of therotation system. Some of the more sensitive elements of the construction havebeen premounted and tested in Europeto avoid unpleasant "surprises" on LaSilla. Figure 4 shows a picture of thelarge square base measuring 8 m x 8 mwhich will be directly coupled with theRKS bearing which will support the entire load of the rotating building.
Figure 5 shows the preassembled12 m high windscreen undergoing aseries of functional tests at MECNAFER,Marghera (Italy). This permeablewindscreen was specially designed forthe ND telescope. The red framesupported by scaffolding which is usedonly for the tests in Europe, guides horizontal bars with interconnecting strong,permeable material (of the type used foryacht sails). It operates by slowing downthe speed of the wind and thus protectsthe telescope. It will be integrated in thecomplete structure and will operateautomatically when the wind speed increases. Erection on La Silla of the rotating building will take almost 6 months tocomplete, starting in February 1988.
At INNSE, Brescia (Italy) the mechanical structure and electronic hardwarehas been completed and the softwareintegration phase has started. The telescope can already perform elementaryfunctions such as pre-setting, slewing,and tracking. Particular attention hasbeen given to the measurement of theresonance frequency of the telescoperesulting in the lowest resonance frequency of around 9.5 Hertz in perfectaccordance with the calculation values.
The telescope's expected shipmentto Chile in March 1988 has been con-
52
Figure 4.
firmed by the present progress of work.The telescope will be equipped with a
Schott Zerodur primary mirror (M1) ofthe meniscus type with aspect ratio D/h= 15, F-number F/2.2 and a weight of 6tons. The mirror blank was delivered tothe optical workshop of Carl Zeiss inJune 1986. After 78 axial invar pads hadbeen glued to the back of the mirror unitand adjustment of the delicate supportsystem, the aspherical deformation ofabout 200 ~l took place under IR-interferometric contro!.
Just above the polishing machine is alaser-interferometer set-up with 3 Dstabilization which monitors accuratelythe figuring process and responds withfull computational evaluation via a directwire to a ~lVax computer.
Figure 5.
With "high tech" equipment of thiskind, Carl Zeiss is on the way to reachthe intrinsic optical quality requestedby ESO, so that 80 % of the light energyis concentrated in 0.15 arcsec at theNasmyth focus. At the end of October1987, progress with the M1 mirror wasextremely encouraging and the averageradial profile was smoothed to arms of32 nanometers. The small flat tertiarymirror has been completed with an intrinsic quality of 8 nanometers rms. Thepolishing process is weil within the timeschedule and completion is expectedaround the middle of 1988.
Considering the present situation withthe project we feel confident that weshall have the first light at the end of1988.