22
Gross Vehicle Weight (GVW): 600 t / 661 ton Payload Class: 363 t / 400 ton Empty Vehicle Weight (EVW): 237 t / 261 ton T 282 C Mining Truck

NTB_T282C_BT_US_08_10084-0

Embed Size (px)

DESCRIPTION

Terex 360 t dump truck

Citation preview

Gross Vehicle Weight (GVW): 600 t / 661 tonPayload Class: 363 t / 400 tonEmpty Vehicle Weight (EVW): 237 t / 261 ton

T 282 CMining Truck

2 T 282 C

Gross Vehicle Weight (GVW): 600 t / 661 ton

Payload Class: 363 t / 400 ton

Empty Vehicle Weight (EVW): 237 t / 261 ton

T 282 C

3T 282 C

Low Operating CostHauling more for less is Liebherr’s trademark to achieve maximum profitability. Liebherr allows for higher output at a lower operating cost by offering durable, yet lighter equipment.

Customer SupportLiebherr provides customers with a complete range of services that deliver the lowest cost of ownership. The company implements the right combination of scheduled, preventative, and planned maintenance to allow custom-ers to achieve availability goals.

Vertical IntegrationLiebherr is synonymous with quality products. The new T 282 C mining truck offers optimum reliability and avail-ability.This 363 t / 400 ton truck utilizes the most current tech-nologies in components and software to minimize the overall cost of ownership.

ProductivityThe Liebherr T 282 C mining truck combines a high horse-power diesel engine with an efficient AC drive system to maximize productivity and minimize fuel consumption.

ReliabilityThe T 282 C is engineered to be strong, durable, and light-weight. This mining truck enables reduced cycle times and offers the highest payload to empty vehicle weight (EVW) ratio in its class.

SafetyLiebherr promotes a safe, healthy, and incident-free work environment for both product and personnel.

4 T 282 C

Front Wheels

Designed to work in conjunction with the front suspensions, the front wheels offer superior maneuverability and reduced tire wear.

The T 282 C is a Liebherr integrated truck. The company incorporates proprietary components in strategic areas, specifically developed to serve the needs of the mining industry. The vertical integration philosophy advances supply chain coordination and facilitates the allocation of resources according to customer needs.

Front Suspensions

The T 282 C features “Double A-Frame” front suspen-sions. This concept provides longer vertical wheel travel and less strut travel, resulting in shorter suspension struts. The “Double A-Frame” design contributes to the reduction of operating costs by increasing tire life. The suspension design eliminates side loading on the struts allowing im-mediate and accurate payload monitoring.

IGBT Control Box

The IGBT technology offers numerous advantages for high power applica-tions. It optimizes the performance and efficiency of the truck, while increasing reliability.

Frame

Welded steel structure with cast components in strategic areas:• Designed according to international In-

stitute of Welding (IIW) fatigue guidelines• Hollowboxrailswithfullywelded

internal stiffeners• Criticalweldsultrasonicallyinspected

based on American Welding Society (AWS) D1.1

• Lightweightdesignsupports low empty vehicle weight

5T 282 C

Rear suspension

The quality of design attenuates loading impact and improves ride with a 20 % longer stroke and 33 % reduction in internal pressure.

Axle box

Optimized vents offer great cooling ca-pabilities. The orientation of the drag link pins extends component life by preventing debris accumulation.

Planetary Gear Sets

The planetary gear sets have been utilized on Liebherr trucks since 2004. This proven system has performed in a variety of applications. Its efficient design maximizes the energy transmitted into torque and reduces mechanical losses inside the gearbox.

Wheel motors

The AC wheel motors have been specifically designed for mining applications to provide the highest truck reliability.

Vertical Integration

6 T 282 C

Litronic Plus Wheel Motors and Planetary Gears

The wheel motors deliver up to 4.474 kW or 6,000 hp. Reduced pressure drops across the motors enhance their cooling capabilities for operation at higher altitudes or at higher ambient temperatures. Multiple gear ratios are available to optimize performance for specific mining applications.

7T 282 C

Productivity

Litronic Plus Grid Box

The horizontal orientation of the AC blower motor provides better accessibility and increases airflow.

This motor is powered by a liquid-cooled inverter located inside the Litronic Plus control box.

Trolley Capable

A package is available upon request. Consult factory for additional details.

The Liebherr T 282 C mining truck combines a high horsepower diesel engine with an efficient Litronic Plus AC drive system to maximize productivity and minimize fuel consumption.

Main components:•Dieselengine •Litronic Plus wheel motors and planetary gears•Mainalternator •LitronicPlusgridbox•LitronicPluscontrolboxwith integrated rectifier and main blower

Diesel EngineOne engine option has two available configurations: fuel optimized and emission optimized (complying with latest emission standards).

The efficient triple injection monitoring system on this engine allows CAN Bus inter-face for the monitoring of fuel consumption and multiple exhaust gas temperatures.As a safer “wet” engine, this diesel engine choice includes a water-jacketed exhaust manifold and turbo system designed to reduce engine surface temperatures below the auto-ignition point of diesel and hydraulic fluid.Other engine options are available.

Main AlternatorThe main alternator is matched to the fitted engine to provide the required power output.

Litronic Plus Control Box with Integrated Rectifier and Main BlowerThe control box consists of two power stacks per motor providing three-phase AC current to each wheel motor. The control box is liquid-cooled. It outperforms air-cooled circuits in warmer climates and higher altitudes due to its greater cooling capability.The rectifier is located inside the pressurized control box protected from water and dust. The main blower is engine speed independent and controlled by a liquid-cooled inverter positioned in the control box. The noise and energy expended by the blower is limited to what is needed for immediate cooling purposes. The efficiency of the blower reduces fuel consumption and increases reliability.

8 T 282 C

~~ 50°C

Cab Temperature

OutsideTemperature

25°C

15°C~~ -40°C -40°F

122°F 77°F

59°F

~~

~~

Climate Control

Liebherr automatic climate control provides a comfortable environment for operators:

•Internalcabtemperatureof25°C(77°F) can be maintained under a maximum ambienttemperatureof50°C(122°F)

•Internalcabtemperatureof15°C(59°F) can be maintained under a minimum ambienttemperatureof-40°C(-40°F)

9T 282 C

ReliabilityThe Liebherr T 282 C is engineered to be strong, durable, and lightweight. This mining truck enables reduced cycle times and offers the highest payload to empty vehicle weight (EVW) ratio in its class.

Litronic Plus IGBT Drive SystemThe IGBT drive system provides a smoother voltage variation which reduces power losses in heat. The reliability of the drive system is enhanced with the use of fewer electrical parts. The unique gate sequencing of the grid box allows an even wear of the grid resistors.

DiagnosticsThe Litronic Plus diagnostics system integrates all vital truck components. Engine, drive, and truck diagnostics can be accessed via a single USB or Ethernet “OPC” port. A data storage system is included and can be used for advanced diagnos-tics. The stored data is accessible through Wi-Fi or remotely via cellular and Low Earth Orbit (LEO) satellites.

A 12-inch color touch screen is provided in the cab for the display of critical systems data, fault codes, and startup sequences. The Litronic Plus diagonstics program detects the exact cause of each fault for greater maintainability.

The Liebherr T 282 C utilizes CAN open operator gauges instead of digital dis-plays. In the event of individual non-vital gauge replacement, the truck is able to continue its operation until service is completed.

Additional space and mounting brackets are available to accommodate optional equipment, such as: dispatch systems, rearview monitor, and two-way radio.

Accessibility

•Dualaccesstoaxleboxviaserviceand maintenance doors

•ACgridboxblowermotor accessible from the deck

•Easyaccesstobothsides of engine and main alternator

•Centralizedservicestationconveni-ently located at ground level

•Samplingpointslocatedat or near ground level

Serviceability and Maintainability

•Individuallyroutedfixedpipingreducing the length and number of hydraulic hoses

•Singleaccesspointforallvitaltruck systems via in-dash color touch screen

•LitronicPlusdiagnostics

•Lightercomponents

•Multipletieoffpoints

10 T 282 C

Brake Blending

The Litronic Plus IGBT AC drive system utilizes dynamic braking to bring the T 282 C to an almost complete standstill of 0,8 km/h (0.5 mph). The brake blending system automatically applies the hydraulic dry disc service brakes to bring the truck to a complete stop.

Brake BlendingDynamic Braking*

40 mph 0.5 mph 0 mph64 km/h 0,8 km/h 0 km/h

* Dynamic braking from 64 km/h (40 mph) to 0 km/h (0 mph)** Service brake blending begins at 0,8 km/h (0.5 mph)

Service Brakes**

11T 282 C

Liebherr exceeds ISO 3450by up to 50% (*)

ISO 3450 101.6 m @ 9%± 1% & 50 kph

(*) Service brakes and dynamic braking - actual performance depends on specific conditions such as ground adhesion and truck speed

Safety

Slip-Slide Control

The Litronic Plus IGBT drive system offers highly advanced slip-slide control. It utilizes a front wheel speed sensor that prevents lock up of rear wheels and allows for reliable dry disc brake blending.

Park Brake

The spring applied / pressure released park brake is capable of holding a 100% loaded truck on a ± 15% grade.

Speed Control

Speed limits can be set for loaded, unloaded, and dump body up conditions. These include mine-determined speed limits, which are independent of operator input. Dynamic braking speed control is available for downhill operation. It allows the use of operator-set limits to maintain a safe operation.

Anti-Rollback

The anti-rollback function automatically applies the service brakes in forward or reverse when zero speed is required on an incline.

Liebherr promotes a safe, healthy, and incident-free work environment for both product and personnel.

Operator CabThe ergonomically designed wide cab offers functionality, visibility, and comfort to the operator. The cab complies with all operator seat vibration and noise exposure standards:vibrationISO2631andnoiseISO6394.

Visual and audible alarms are activated when the operator door is opened and the parking brake is not applied.

Increased operator protection is achieved with the addition of a safety plate under-neath the cab. The cab design includes an ISO 3471 compliant integrated ROPS. Braking SystemThe braking of the truck is performed by dynamic braking. The system is virtually wear-free, resulting in less replacement parts.

The emergency braking is performed by hydraulic dry disc brakes. The hydraulic braking system is split into two separate circuits for front and rear with independent accumulators for each circuit. The system complies with ISO 3450 braking stan-dard. A separate pedal for the service brake is provided for emergency situations.

12 T 282 C

Dynamic Braking & Dry Disc

Dynamic Braking & Wet Disc

Low Cost per Tonne High Cost per Tonne

Sto

pp

ing

Dis

tanc

e

Wet Disc Only

ISO 3450

Cost Effectiveness of Braking SystemsFail Pass

Frame

Liebherr load-management design philosophy increases durability and minimizes Empty Vehicle Weight (EVW). Low EVW is primarily achieved by utilizing castings only in high stress areas of the frame, such as the integrated hoist carriage, cross member, and dump body pivot.

Castings in high stress areas

13T 282 C

56,000

58,000

60,000

62,000

64,000

66,000

68,000

70,000

72,000

T 282 C16

17

18

19

20

21

22

23

74,000

24

25

Leading Ultra ClassCompetitor

320ton ClassCompetitor

Hours NeededFuel Consumption

Op

erat

ing

Hou

rs

Million Liters

Low Operating CostHauling more for less is Liebherr’s trademark to achieve maximum profitability. Liebherr allows for higher output at a lower operating cost by offering durable, yet lighter equipment.

Less Fuel ConsumptionThe T 282 C is a fuel efficient truck. Its AC drive system is coupled with a main alter-nator powered by a high horsepower engine. The drive system provides continuous acceleration and dynamic braking without shifting gears.

By incorporating an efficient load management, the T 282 C requires less operating hours to meet production targets. As a consequence, associated costs are minimized, such as: fuel, tires, labor, spare parts, lubricants and maintenance. The chart below illustrates the operating hours and fuel required of two leading competitors to equal the production seen of the T 282 C at 60,000 hours.

Low Empty Vehicle Weight (EVW)The new Litronic Plus AC drive system weighs less than both mechanical drive systems and old versions of AC drives. It requires the use of lighter components, which reduces the EVW.

The T 282 C innovative “Stress Flow” design requires lighter steel structures and castings, than other conventional truck frames, while maintaining durability.

Differential Wheel Torque Control

When traveling through a curve, the drive system will automatically adjust the torque of the rear wheel motors in order to maximize traction and minimize tire wear during low speed handling.

Cost Effectiveness of Dry vs. Wet Brake Systems

The T 282 C utilizes dynamic braking. Dry disc brakes are available for emergency situations. The air-cooled dry disc brakes do not require additional oil, pumps, filters, and cooling circuits to operate. Liebherr braking systems comply with ISO 3450 standard and offer the lowest cost per tonne.

14 T 282 C

On-Site Support

Liebherr provides on-site service support, as well as training for customer maintenance groups. Training classes can be customized to suit specific needs.

15T 282 C

Planning Assembly T

raining

O

pera

tion

Product Support Logistics Tech. Publications Forecasting Training Dept.

Par

ts S

uppo

rt

C

ompo

nent

Reb

uild

P

roduct Upgrade

Customer Support

Technical Publications

The technical publications department offers both printed and online manuals. Additional options are available for online manuals.

On-Line Support

A LinkOne user-friendly, accurate, and complete electronic parts cata-log gives customers access to the original configuration of the truck. This publication viewing system makes information available to assist customers with finding the right part, the first time, every time.

Liebherr provides customers with a complete range of services that deliver the lowest cost of ownership. The company implements the right combination of scheduled, preventative, and planned maintenance to allow customers to achieve availability goals.

Product Support

Liebherr product support provides the vital interface between the customer and Liebherr. There are different levels of product support available:

•Assembly•Maintenanceadvice•Troubleshootingassistance•Technicalexpertise

Product support personnel work with customers from the assembly of a truck through-out its operating life. Liebherr understands the importance of proper service and sup-port, and will be there for the life of the equipment.

16 T 282 C

Performance Indicators

•Liebherrprovideskeyperformanceindicators(KPIs)to communicate truck fleet performance

•TheKPIsarecustomizedtositerequirements

17T 282 C

Customer Support

Forecasting Tool

•Continuallyupdatestheestimatedlifeofamajorcomponent based on algorithm analyses of hours at the time of replacement

•Providesaccurateforecastedlifetoensurethatamajor component’s spare is available when needed

•Inventoryplanningtakesinconsiderationthespareparts needed for scheduled maintenance and com-ponent rebuild projects

Operator and Field Service Technician TrainingThe training program consists of a three-level competency-based blended training.

Level 1 - General web-based technical skills training Level 2 - Product-specific web-based technical trainingLevel 3 - Product-specific hands-on troubleshooting technical training

Advantages of Liebherr’s technical training strategy:

• Customerfocused24/7accesstotechnicaltraining(just-in-timetraining)• Minimizesemployeetimeoffthejob• Maximizeseffectivenessofclassroomtrainingtime• Reducescustomer’soveralltrainingcosts• Provides customers with mechanism for recording and tracking employee training

Parts Support and Logistics The proactive forecasting for global fleet requirements optimizes inventories and logistics to ensure prompt response to any parts requirements:

•Continuoustwo-yearforecasting•24/7on-callservice•Inventoryplanningandmanagement•Globalandreal-timeinventorydatatrackingsystem

Component Rebuild ProgramCondition-based monitoring maximizes major component life while avoiding unplanned failures. Rebuilds are conducted by certified repair shops using best prac-tices, ensuring that the life and reliability of rebuilt components match new compo-nent performance expectations.

Product Upgrade ProgramsThe operating life of the Liebherr T 282 C can be extended and optimized by upgrad-ing any of its systems or components as advances in technology, innovations in design, and improvements in manufacturing techniques occur.

18 T 282 C

Technical Data

Engine

Model _________________________ MTU DD 20V4000 Tier IIGross horsepower @ 1,800 rpm ___ 2.800 kW / 3,750 hpNo. of cylinders _________________ 20Displacement ___________________ 95,4L/5,822in³Wet weight _____________________ 12.020 kg / 26,500 lbsCrankcase _____________________ 335 L / 88 galCooling system _________________ 758 L / 200 gal

Model _________________________ Cummins QSK 78 Grosshorsepower@1,900rpm ___ 2.610 kW / 3,500 hpNo. of cylinders _________________ 18Displacement ___________________ 78L/4,735in³Wet weight _____________________ 11.300kg/24,912lbsCrankcase _____________________ 295L/78galCooling system _________________ 721L/191gal

Fan clutch (optional) _____________ Variable speed, temperature controlledAir cleaners ____________________ Two units with 2 elements per unit with

electronic restriction monitoring in the cabRadiator _______________________ MesabiStarter _________________________ ElectricRoll out power module ___________ Radiator, engine and main alternator,

mounted on roll out sub frameBatteries _______________________ 6 x 12 Volt, (3 series of 2), 1,200 CCA each

at-18°C(0°F),1,475CCAat0°C(32°F)Consult factory for other engine options.

Electric Drive System

Manufacturer ___________________ Liebherr - Litronic Plus AC drive system (IGBT)

Main alternator __________________ AC brushless, direct driveWheel motors ___________________ Litronic Plus AC induction motors (2)Gear ratio ______________________ Standard 43.7 to 1 - haul profile

dependantOptional 37.33 to 1 - haul profile dependant

Max speed _____________________ Standard 54 km/h / 34 mphOptional 64 km/h / 40 mph

Cooling fan _____________________ Electric cooling motor with twin impeller radial fan (75 kW / 100 hp)

Tires

Rims __________________________ 41" x 63" bolt on rimsTires ___________________________ Michelin56/80R63orBridgestone59/80R63

Suspensions

Front suspension ________________ Double A-frame with inclined king pin design pivot and spindle

Rear suspension ________________ Three bar linkage comprised of triangular upper link plus two bottom drag links

Suspension struts _______________ Nitrogen over oil with integral damping

Braking Systems

Electric dynamic braking with continuous rating, fan forced air over stainless steel resistor grids with a dry disc emergency braking system.Electric dynamic braking ___________ Max: 4.480 kW / 6,030 hpExtended speed range _____________ Full dynamic braking down to 0,8 km/h /

0.5 mph. Automatic brake blending with service brakes down to zero

Dynamic braking speed control _____ Operator adjustable and will automatically slow the truck on downhill grade

Two speed over speed _____________ Automatic speed settings for empty and loaded truck adjustable for site requirements

Slip slide traction control ___________ Computer controlled, propel and dynamic braking, forward and reverse, fully independent left and right

Service brakes front _______________ Single disc, wheel speed, five calipers per wheel

Service brakes rear ________________ Dual discs per side, one caliper per disc, armature speed

Hydraulic accumulators ____________ 2 x 7,6 L / 2 gal, separate accumulator for front and rear axle

Park brakes ______________________ Spring applied, pressure released, one caliper per each rear disc

Filtration _________________________ Cleanliness level ISO 18/16/13

Steering

Ackermann center point lever system. Full hydraulic power steering with accu-mulator safety backup. Fully separate from dump hydraulic system. Two double acting hydraulic cylinders.Hydraulic accumulator ______________ 170 L / 45 gal SAE J53Filtration __________________________ Cleanliness level ISO 18/16/13Turning radius (SAE) – Tire centerline* _ 17,20 m / 56‘ 5“Vehicle clearance radius _____________ 18,45 m / 60‘ 6“* This is a theoretical calculation and depends on the ground surface, the strut length and tie rod length.

Dump System

Two double stage, double acting hoist cylinders with inter stage and end cushioning in both directions. Electronic joystick with full modulating control in both extend and retract. Dump angle ____________________ 49°(45°withoptionalkick-outswitch)Cycle times _____________________ < 50 secondsRemote dump __________________ Quick disconnects for external power

dumping (buddy dump) accessible from ground level

Filtration _______________________ High pressure filtration and return line filtration. Cleanliness level ISO 18/16/13

Body

Body sizes are custom designed to fit customer requirements and specific ap-plications.

19T 282 C

Frame

Technical Data

Design ___________________________ Closed box structure with multiple torque tube cross members, internal stiffeners and integrated front bumper. Steel castings are used in high stress areas.

Welding __________________________ Frame girders welded inside and out with ultrasonic inspection aligned with AWS D1.1

Weights

Payload _____________________________ 363 t / 400 ton

Gross Vehicle Weight (GVW) ___________ 600 t / 661 ton

Chassis weight * _____________________ 194t/214ton

Body weight _________________________ Custom for each mine site

Frame capacity ** ____________________ 406 t / 447 ton

Weight distribution ___________________ Empty – front 46 % / rear 54 %Loaded – front 33 % / rear 67 %

* depends on options fitted** total weight of body and payload, subject to chassis weight

Cab

Deluxe cab with integrated ROPS and double wall design for optimum insulation. Fully adjustable air suspension operator seat with double lumbar support and full size second seat for training requirements. Operator comfort controls include a tilt and telescoping steering wheel, heater, defroster and standard AC. Real-time vital truck information is easily displayed to the operator and also recorded for download.

Sound

Designed to meet ISO, OSHA and MSHA occupational noise criteria for truck operator weighted sound exposure.

Fluid Capacities

Fuel tank ____________________________ 6.813 L / 1,800 gal

Hydraulic dump circuit - Tank ______________________________- System ____________________________

1.302 L / 344 gal 1.514 L / 400 gal

Hydraulic brake and steering - Tank ______________________________- System ____________________________

924L/244gal1.060 L / 280 gal

Planetary gear sets, each (2) ___________ 280 L / 74 gal

Front wheels, each (2) ________________ 60 L / 16 gal

Grease tank _________________________ 90kg/200lbs

Dimensions

Note: All measurements assuming unloaded using 56/80R63 tires. Loading height dependent on final dump body design.

20 T 282 C

Performance Curves0

0(Lb

f x 1

000)

(kN

)

RIM

PU

LL

50 100

150

200

250

300

350

400

450

500

550

600

650

700

750

800

850

900

950

1000

1050

1100

1150

1200

1250

1300

1350

1400

100

200

GVW x 1000

Curves Based on 0% Rolling Resistance

1600

1500

1400

1300

1200

1100

1000

900

800

700

600

500

400

300

200

100 201

2

3

4

5

6

7

8

9

10

11

12

13

14

Per

cent

effe

ctiv

e gr

ade

15

16

17

18

19

20

21

222324

00

5 10 15 20 25 30 35 40 45 50

Speed

55 60 65 70 75 80

2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48

(km/h)

(mph)

40

(kg)

(lb)

300

400

500

600

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340

360 Performance Chart Parameters

Gross power _________________________ 2,796kW(3,750hp)

Net power ___________________________ 2,610 kW (3,500 hp)

Tire size _____________________________ 56/80 R63

Gear ratio ___________________________ 43.7 to 1

Reference curves ____________________ A: Propulsion B: Retard

Note

The propulsion curve is calculated using net horsepower therefore site specific and climatic variables will have an effect on the parasitic loss estimations.

21T 282 C

Standard Equipment

Standard Equipment

Optional Equipment

•Accessladders-45°diagonalstair(driverssideaccess) with two side ladders with flexible step•Accesslights-3xladder,1xsuperstructure•Accumulators-1xsteering170L/45gal. 2 x brakes 7,6 L / 2 gal (split front & rear brake system)•Aircleanerdustejectors-automatic•Aircleanerindicators•Anti-rollback-inforwardandreverse•Axlebox-dualentryserviceaccessandrearairexhaust•Batteries-6x12Vwiredinseries/parallel•Batteryboxlockouts-groundlevel,battery,propelandstarter•Brakewarninglights(cabmounted)-dynamicbrakeandservicebrake(LED)•Brakes-dynamicbrakingwithautomatichydraulicbrakeblendingand emergency hydraulic service brakes•Catwalk-rightandleftsideofengine•Centralizedservicestation-groundlevel,driverside,withfuelgauge•Climatecontrol-combinedheaterandairconditionerwith multiple air ducts and filtered air•Color-white/grey•Cupholder-2xcenterconsolemounted•Drivesystem-LitronicPlusliquid-cooledIGBTandgridboxcontrolw/ Litronic Plus AC wheel motors•Electricstarter•Electricalsystem-24VDC•Emergencystops-in-cabandgroundlevel•Enginefan-lowrpmwithclutch•Exhaust-sidemountedmufflerswithinsulatedexhaustpipes•Fireextinguishers-2xhandheldextinguishers•Gearratio-43.7to1•Greasesystem-automaticlubricationsystem•LitronicPlusGridbox-resistorgridcontrolsystemandvariable AC grid box blower motor•Headlights(HID)-4xhighbeam,4xlowbeam•Hydrauliccoolers-1xhoistsystem,2xplanetarygearsetsgearoil•Hydraulicfilters-highpressureandreturnlinebrake, steering and hoist with electronic monitoring

Optional Equipment

•Accessladder-retractablestair•Accumulators-MDG15certified•Batteryisolation-doublepolewithcriticalsystembypass•Centralizedservicestation-offdriversidemounted•Coldclimate-engineheater•Color-Liebherryellow/grey•Corneringlights(HID)-2xforwardfacingsuperstructuremounted•Dumpbody-liners,heated,tailgates,rockdeflectors•Firesuppressionsystem•Foglights(HID)-4xbottomradiatormounted•Gearratio-37.33to1•Highaltitude/highcoolingpackage•Hoistlimit-45°hoistkickoutswitch•Protectionplates-bellypan,hydraulictank,steeringidlerlowergreaseline

•Mirrors-driverside(flat),offdriverside(convex)andaccessladder(convex)•Mudflaps-frontandrearofhydraulicandfueltanks•Parkbrake-springappliedpressurerelease•Payloaddisplay-2xsuperstructuremounted•Poweroutlets-12VDCand115VAC•Powerwindows-driverandpassenger•Pressurizedcab-withfanon•Radiator - with header tank level gauge•Radioready-wiring,speakersandDINfitting•RearWheelDrive-LitronicPlusplanetarygearsandwheelmotors•Recoverypoints-frontandrear•Recovery system - auxiliary connectors for brake, steering and hoist ”buddy system”•Reversealarm•Reverselights-2xaxlebox,1xdriverssidesuperstructure•Rims - bolt on front and rear•Rockejectors-bartype•ROPS-integrated•Seatbelt-3point-50mm/2inchwide•Seats-fullyadjustabledriverandpassengerseatswithairsuspension•Serviceaccessladders-rightandleftenginebayladders•Service lights - 2 x engine bay and 2 x axle box (LED)•Shut off valves - brake and steering, hoist and fuel tank with electronic monitoring•Sightgauges-brake,steering,hoist,radiatortanksandfrontwheelhub•Steeringwheel-tiltingandtelescopicwithcenteroperatedhorn•Sun visors - 2 x windshield sun visors and 1 x driver door mounted pull-down blind•Systems interface - Can Open, Ethernet (OPC), Wi-Fi, USB•Tie off points - multiple personnel tie off points•Touchscreen-Large12“dimmablecolortouchscreenwithoperator information and warning•Trucklights-tail,brake,dynamicbrakeandindicators(LED)•Windows-temperedandtintedglass•Windshield-laminatedandtintedglass•Wipers - two speed electric and intermittent with self park and dual wiper arms

•Reverselight(HID)-offdriversidesuperstructure•Rims-doublegutterbolton•Risetopperlights(HID)-2xtopradiatormounted•Rockejectors-chaintype•Serviceaccessladders-Offdriversideanddriversideenginebayand hydraulic tank ladders with fold up•Servicelights-2xrearenginebay(LED)•Soundattenuationpackage•Speciallanguagedecals•Trolleycapable•Videocamerasandmonitors-Offdriversideandreverse

Standard and optional equipment subject to change at the discretion of the manufacturer.

Please contact your local representative for further information.

NTB_RS_US_D.qxd 26.03.2007 10:38 Uhr Seite 1

BK-RPLME1100398-1-10.10 Subject to technical modifications. Illustrations may include optional equipment and accessories.

ISO9001:2000CertifiedFirm

Liebherr Mining Equipment Co.4100 Chestnut Avenue, Newport News, VA 23607, USAwww.liebherr.com, E-Mail: [email protected]

www.liebherr.com

The Liebherr Group of Companies

Wide product rangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s high-value products and services enjoy a high reputation in many other fields, too. The wide range includes domes-tic appliances, aerospace and transportation systems, machine tools and maritime cranes.

Exceptional customer benefitEvery product line provides a complete range of models in many different versions. With both their technical excel-lence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application.

State-of-the-art technologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control techno-logy for construction equipment and mining trucks.

Worldwide and independentHans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 100 companies with over 32,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.

www.liebherr.us

Rueckseite US.indd 1 16.03.10 14:35