Seite 1 von 5

NQ-version update 15.10.2012

Loose the 4 in-hex screws.

Plug in the thumb drive.

Press on the Desktop button.

Press on the Passord button.

Seite 2 von 5

Press on the CODE button and enter 158, afterwards press ENT.

Return to the main screen.

Press on the PARAMETER button. DONT TOUCH any other parameters or functions.

Press on the Start button.

Press Yes

Seite 3 von 5

Press Download

Select FIRMWARE

Press Ok and wait until the upload is done.

Press Ok.

Select FONTS

Seite 4 von 5

Press Ok and wait until the upload is done.

Press Ok.

Select APPLICATION This procedure can take approx. 30 minutes.

Press Ok and wait until the upload is done.

Press Ok and wait until the upload is done.

Seite 5 von 5

Press EXIT

Return to the MENU

Check if the update was successful.

Switch off the machine, remove the thumb drive and assemble back the panel. Wait 1 minute and switch back on. Double check if everything went well.