NPTEL Video Lecture Topic List - Created by LinuXpert · PDF file · 2017-07-04Lecture 5 - Exercise on ... Introduction to Mineral Beneficiation Lecture 11 ... Exercises in Mineral

NPTEL Video Course - Metallurgy and Material Science - NOC:Phase Field Modelling: The Materials Science, Mathematics and Computational Aspects

Subject Co-ordinator - Dr. M.P. Gururajan

Co-ordinating Institute - IIT - Bombay

Sub-Titles - Available / Unavailable | MP3 Audio Lectures - Available / Unavailable

Lecture 1 - Module 1Lecture 2 - Module 1Lecture 3 - Module 1Lecture 4 - Module 1Lecture 5 - Module 1Lecture 6 - Module 2Lecture 7 - Module 1Lecture 8 - Module 1Lecture 9 - Module 1Lecture 10 - Module 1Lecture 11 - Module 1Lecture 12 - Module 2Lecture 13 - Module 2Lecture 14 - Module 2Lecture 15 - Module 2Lecture 16 - Module 2Lecture 17 - Module 3Lecture 18 - Module 3Lecture 19 - Module 3Lecture 20 - Module 3Lecture 21 - Module 3Lecture 22 - Module 3Lecture 23 - Module 2Lecture 24 - Module 4Lecture 25 - Module 4Lecture 26 - Module 4Lecture 27 - Module 4Lecture 28 - Module 4Lecture 29 - Module 5

NPTEL Video Lecture Topic List - Created by LinuXpert Systems, Chennai---------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------------------------------Get Digi-MAT (Digital Media Access Terminal) For High-Speed Video Streaming of NPTEL and Educational Video Courses in LAN

www.digimat.in

Lecture 30 - Module 5Lecture 31 - Module 5Lecture 32 - Module 6Lecture 33 - Module 6Lecture 34 - Module 6Lecture 35 - Module 6Lecture 36 - Module 7Lecture 37 - Module 7Lecture 38 - Module 8Lecture 39 - Module 8Lecture 40 - Module 8Lecture 41 - Module 8Lecture 42 - Module 9Lecture 43 - Module 9Lecture 44 - Module 9Lecture 45 - Module 9Lecture 46 - Module 10Lecture 47 - Module 10Lecture 48 - Module 10Lecture 49 - Module 10Lecture 50 - Module 10Lecture 51 - Module 11Lecture 52 - Module 11Lecture 53 - Module 11Lecture 54 - Module 11Lecture 55 - Module 12Lecture 56 - Module 12Lecture 57 - Module 12Lecture 58 - Module 12Lecture 59 - Module 12Lecture 60 - Module 13Lecture 61 - Module 13Lecture 62 - Module 13Lecture 63 - Module 13Lecture 64 - Module 13Lecture 65 - Module 14Lecture 66 - Module 14Lecture 67 - Module 14Lecture 68 - Module 14



www.digimat.in

Lecture 69 - Module 15Lecture 70 - Module 15Lecture 71 - Module 16Lecture 72 - Module 16Lecture 73 - Module 16Lecture 74 - Module 16Lecture 75 - Module 17Lecture 76 - Module 17Lecture 77 - Module 18Lecture 78 - Module 18Lecture 79 - Module 18Lecture 80 - Module 18Lecture 81 - Module 19Lecture 82 - Module 19Lecture 83 - Module 20Lecture 84 - Module 20Lecture 85 - Module 21Lecture 86 - Module 21Lecture 87 - Module 22



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Introduction to Crystal Elasticity and Crystal Plasticity

Subject Co-ordinator - Prof. Swarup bag

Co-ordinating Institute - IIT - Guwahati


Lecture 1 - Structure and properties of materials - Part ILecture 2 - Structure and properties of materials - Part IILecture 3 - Elasticity Isotropic elasticity of materials; Anisotropic elasticity - Part ILecture 4 - Elasticity Isotropic elasticity of materials; Anisotropic elasticity - Part IILecture 5 - Continuum Plasticity - I (Part A)Lecture 6 - Continuum Plasticity - I (Part B)Lecture 7 - Continuum Plasticity - II (Part A)Lecture 8 - Continuum Plasticity - II (Part B)Lecture 9 - Crystal Plasticity - I (Part A)Lecture 10 - Crystal Plasticity - I (Part B)Lecture 11 - Crystal Plasticity - II (Part A)Lecture 12 - Crystal Plasticity - II (Part B)Lecture 13 - Crystal Plasticity - II (Part C)Lecture 14 - Hardening Mechanisms in Metals - Part ILecture 15 - Hardening Mechanisms in Metals - Part IILecture 16 - Hardening Mechanisms in Metals - Part IIILecture 17 - Multi-Scale Approach to Materials Modelling



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Advanced Characterization Techniques

Subject Co-ordinator - Dr. Krishanu Biswas, Prof.N.P.Gurao

Co-ordinating Institute - IIT - Kanpur


Lecture 1 - Advanced Characterization TechniquesLecture 2 - Advanced Characterization TechniquesLecture 3 - Advanced Characterization TechniquesLecture 4 - Advanced Characterization TechniquesLecture 5 - Advanced Characterization TechniquesLecture 6 - Advanced Characterization TechniquesLecture 7 - Advanced Characterization TechniquesLecture 8 - Advanced Characterization TechniquesLecture 9 - Advanced Characterization TechniquesLecture 10 - Advanced Characterization TechniquesLecture 11 - Advanced Characterization TechniquesLecture 12 - Advanced Characterization TechniquesLecture 13 - Advanced Characterization TechniquesLecture 14 - Advanced Characterization TechniquesLecture 15 - Advanced Characterization TechniquesLecture 16 - Advanced Characterization TechniquesLecture 17 - Advanced Characterization TechniquesLecture 18 - Advanced Characterization TechniquesLecture 19 - Advanced Characterization TechniquesLecture 20 - Advanced Characterization TechniquesLecture 21 - Advanced Characterization TechniquesLecture 22 - Advanced Characterization TechniquesLecture 23 - Advanced Characterization TechniquesLecture 24 - Advanced Characterization TechniquesLecture 25 - Advanced Characterization TechniquesLecture 26 - Advanced Characterization TechniquesLecture 27 - Advanced Characterization TechniquesLecture 28 - Advanced Characterization TechniquesLecture 29 - Advanced Characterization Techniques



www.digimat.in

Lecture 30 - Advanced Characterization TechniquesLecture 31 - Advanced Characterization TechniquesLecture 32 - Advanced Characterization TechniquesLecture 33 - Advanced Characterization Techniques



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Electroceramics

Subject Co-ordinator - Dr. Ashish Garg



Lecture 1Lecture 2Lecture 3Lecture 4Lecture 5Lecture 6Lecture 7Lecture 8Lecture 9Lecture 10Lecture 11Lecture 12Lecture 13Lecture 14Lecture 15Lecture 16Lecture 17Lecture 18Lecture 19Lecture 20Lecture 21Lecture 22Lecture 23Lecture 24Lecture 25Lecture 26Lecture 27Lecture 28Lecture 29



www.digimat.in

Lecture 30Lecture 31Lecture 32Lecture 33Lecture 34Lecture 35Lecture 36Lecture 37Lecture 38Lecture 39Lecture 40Lecture 41



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Fuels Refractory and Furnaces

Subject Co-ordinator - Prof. Satish Ch. Koria



Lecture 1 - Energy Resources and EnvironmentLecture 2 - Characterization of FuelsLecture 3 - Characterization of FuelsLecture 4 - Production of Secondary FuelsLecture 5 - Materials Balance in Coke-makingLecture 6 - Heat Balance and Clean Development MechanismLecture 7 - Production of Secondary FuelsLecture 8 - Materials and Heat Balance in GasificationLecture 9 - Principles of combustionLecture 10 - Principles of combustionLecture 11 - Materials balance in combustionLecture 12 - Principles of CombustionLecture 13 - Flame Temperature CalculationsLecture 14 - Refractory in FurnacesLecture 15 - Refractory in FurnacesLecture 16 - FurnaceLecture 17 - Heat Utilization in furnaces, energy flow diagramsLecture 18 - Heat Utilization in furnaces, energy flow diagramsLecture 19 - Heat Utilization in FurnacesLecture 20 - Heat Utilization in FurnacesLecture 21 - Transport Phenomena in FurnacesLecture 22 - Macroscopic Energy BalanceLecture 23 - Macroscopic Energy BalanceLecture 24 - Macroscopic Energy BalanceLecture 25 - Macroscopic Energy BalanceLecture 26 - Macroscopic Energy BalanceLecture 27 - Principles of Burner DesignLecture 28 - Transport Phenomena in FurnacesLecture 29 - Transport Phenomena in Furnaces



www.digimat.in

Lecture 30 - Transport Phenomena in FurnacesLecture 31 - Transport Phenomena in FurnacesLecture 32 - Steady Heat flows in Furnace and Heat ExchangerLecture 33 - Exercises on Heat Flow in Furnaces and Heat ExchangersLecture 34 - Exercises on Heat Flow in Furnaces and Heat ExchangersLecture 35 - Miscellaneous TopicsLecture 36 - Miscellaneous TopicsLecture 37 - Miscellaneous TopicsLecture 38 - Miscellaneous topicsLecture 39 - Furnace efficiency, Fuel Saving, Carbon OffsetLecture 40 - Furnace efficiency, Fuel Saving, Carbon Offset



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Introduction to Biomaterials

Subject Co-ordinator - Dr. Kantesh Balani, Dr. Birkamjit Basu



Lecture 1 - Introduction to basic concepts of Biomaterials Science; Salient properties of important material classes; overview of body environment,Lecture 2 - Manufacturing and properties of metals, ceramics, polymers and compositesLecture 3 - Concept of biocompatibility, host response, structure-property of biological cellLecture 4 - Structure and properties of cells, protein and cellular adaptation processLecture 5 - Cell-ILecture 6 - Cell-IILecture 7 - Cell Migration and Cell Division and cell deathLecture 8 - Cell Differentiation and Cell DeathLecture 9 - Cell Apoptosis-ILecture 10 - Cell Apoptosis-IILecture 11 - Structure and properties of Protein; cell - material interactionLecture 12 - Assessment of biocompatibility of biomaterialsLecture 13 - Biological testing (hemocompatibility, tribological testing)Lecture 14 - Structure and properties of bone as well as in vivo testing and histocompatibility assessmentLecture 15 - Important biometallic alloysLecture 16 - Ti AlloyLecture 17 - Co-Cr-Mo alloysLecture 18 - BioceramicsLecture 19 - Processing of BioceramicsLecture 20 - Ceramics, Bioceramics and GlassesLecture 21 - Sintering and mechanical properties of ceramicsLecture 22 - Fracture and toughening of ceramic compositesLecture 23 - Development of based bioceramic composites for hard tissue replacementLecture 24 - Alternative phosphate materials, based composites with bactericidal property and glass ceramics for dental restorationLecture 25 - Electrostatic Spraying of UHMWPE-HA-CNT compositesLecture 26 - Thin Films and CoatingsLecture 27 - hermal Spray CoatingsLecture 28 - Biocompatibility of plasma sprayed CNT reinforced Hydroxyapatite biocomposite coatingsLecture 29 - Biocompatibility of Alumina and CNT reinforced Hydroxyapatite



www.digimat.in

Lecture 30 - Glass-ceramics for dental restoration applicationsLecture 31 - Structure and properties of polymersLecture 32 - Biodegradable polymers (Importance)Lecture 33 - Biodegradable polymers (Types)Lecture 34 - Mechanisms of BioerosionLecture 35 - External field and material interactionLecture 36 - Tissue Engineering and wound healingLecture 37 - Understanding Design Concepts of Bio-implantsLecture 38 - Understanding Design Concepts of Dental-implantsLecture 39 - Understanding Design Concepts of Orthopedic-implant



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Materials and Energy balance in Metallurgical Processes

Subject Co-ordinator - Prof. Satish Ch. Koria



Lecture 1 - Introduction to CourseLecture 2 - Measurement of QuantitiesLecture 3 - Exercises on Measurement of Quantities, Introduction to StoichiometryLecture 4 - Stoichiometry Concept and ExerciseLecture 5 - Exercise on Stoichiometry and Introduction to ThermochemistryLecture 6 - ThermochemistryLecture 7 - Exercise on Thermochemistry & Frequently Asked QuestionsLecture 8 - Errors in MeasurementsLecture 9 - Basics of Materials & Energy BalanceLecture 10 - Introduction to Mineral BeneficiationLecture 11 - Materials Balance in Mineral Processing and FaqLecture 12 - Exercises in Mineral ProcessingLecture 13 - Calcination Concepts & ExercisesLecture 14 - Pyromet ExtractionUnit ProcessesLecture 15 - Predominance Area DiagramLecture 16 - Material Balance in Roasting;illustrationLecture 17 - Heat Balance in Roasting illustrationLecture 18 - Exersises on RoastingLecture 19 - Exercises on RoastingLecture 20 - Smelting Matte SmeltingLecture 21 - Exercise-I Matte SmeltingLecture 22 - Exercise-II Matte SmeltingLecture 23 - Reduction SmeltingLecture 24 - Lead Smelting Material BalanceLecture 25 - Imperial Smelting ProcessLecture 26 - Introduction to IronmakingLecture 27 - Coke MakingLecture 28 - Ironmaking FundamentalsLecture 29 - Material & Heat Balance in Ironmaking - I



www.digimat.in

Lecture 30 - Material & Heat Balance in Ironmaking - IILecture 31 - RIST Diagram - ILecture 32 - RIST Diagram - IILecture 33 - Concepts in ConvertingLecture 34 - Exercise in ConvertingLecture 35 - Additional Topics - I Melting in CupolaLecture 36 - Additional Topics - II GasificationLecture 37 - Additional Topics - III Material Balance in GasificationLecture 38 - Additional Topics - IV Industrial FurnacesLecture 39 - Energy Balance in Industrial FurnacesLecture 40 - Thoughts on Application of Energy Balance



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Optoelectronic Materials and Devices

Subject Co-ordinator - Prof. Deepak Gupta, Prof. Monica Katiyar



Lecture 1 - Conductivity of materials, Drudeâ��s theory and its failuresLecture 2 - Free electron theoryLecture 3 - Free electron theoryLecture 4 - Crystal structure, Reciprocal lattice ILecture 5 - Reciprocal lattice II, Brillouin zone and Braggâ��s diffraction conditionLecture 6 - Electrons in a crystal, Blochâ��s electronLecture 7 - Free electron band diagrams in an empty latticeLecture 8 - Effect of periodic potential, Origin of band-gap through Kronig-Penny modelLecture 9 - Electron dynamicsLecture 10 - Conduction in relation to band diagramsLecture 11 - Semiconductor E-k diagrams and their material propertiesLecture 12 - Equilibrium carrier statistics in semiconductorsLecture 13 - Equilibrium carrier statistics in semiconductorsLecture 14 - Equilibrium carrier statistics in semiconductorsLecture 15 - Doping in semiconductorsLecture 16 - Equilibrium carrier statistics in semiconductorsLecture 17 - Equilibrium carrier statistics in semiconductorsLecture 18 - Semiconductor junctions in band-diagramsLecture 19 - Linear dielectric behaviorLecture 20 - Non-linear dielectric behaviorLecture 21 - Carrier recombination-generation - ILecture 22 - Carrier recombination-generation - IILecture 23 - R-G statistics via R-G centersLecture 24 - Optoelectronic materials and bandgap engineeringLecture 25 - Optical properties of materialsLecture 26 - Optical properties of single interfacesLecture 27 - Optical Properties of two interfacesLecture 28 - DriftLecture 29 - Diffusion



www.digimat.in

Lecture 30 - Continuity EquationLecture 31 - Resistor and diode (p-n junction)Lecture 32 - Fundamentals of p-n junctionLecture 33 - Fundamentals of p-n junction (Continued...)Lecture 34 - Solar cellsLecture 35 - Microelectronics processingLecture 36 - MOS capacitorLecture 37 - TransistorLecture 38 - Organic ElectronicsLecture 39 - Organic Light Emitting DiodesLecture 40 - Organic Solar Cells and Organics Thin Film Transistors



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Steel Making

Subject Co-ordinator - Prof. Satish Ch. Koria, Prof. Dipak Mazumdar



Lecture 1Lecture 2Lecture 3Lecture 4Lecture 5Lecture 6Lecture 7Lecture 8Lecture 9Lecture 10Lecture 11Lecture 12Lecture 13Lecture 14Lecture 15Lecture 16Lecture 17Lecture 18Lecture 19Lecture 20Lecture 21Lecture 22Lecture 23Lecture 24Lecture 25Lecture 26Lecture 27Lecture 28Lecture 29



www.digimat.in

Lecture 30Lecture 31Lecture 32Lecture 33Lecture 34Lecture 35Lecture 36Lecture 37Lecture 38Lecture 39Lecture 40Lecture 41Lecture 42



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Structure of Materials

Subject Co-ordinator - Dr. Anandh Subramaniam



Lecture 1 - OverviewLecture 2 - Geometry of CrystalsLecture 3 - Geometry of CrystalsLecture 4 - Geometry of CrystalsLecture 5 - Geometry of CrystalsLecture 6 - Geometry of CrystalsLecture 7 - Geometry of CrystalsLecture 8 - Geometry of CrystalsLecture 9 - Geometry of CrystalsLecture 10 - Geometry of CrystalsLecture 11 - Geometry of CrystalsLecture 12 - Geometry of CrystalsLecture 13 - Miller IndicesLecture 14 - Miller Indices (Continued...) and Crystal StructuresLecture 15 - Crystal StructuresLecture 16 - Crystal StructuresLecture 17 - Crystal StructuresLecture 18 - Crystal StructuresLecture 19 - Crystal StructuresLecture 20 - Crystal StructuresLecture 21 - Crystal Structures (Continued...) and Defects in CrystalsLecture 22 - Defects in CrystalsLecture 23 - Defects in CrystalsLecture 24 - Defects in CrystalsLecture 25 - Defects in CrystalsLecture 26 - Defects in CrystalsLecture 27 - Defects in CrystalsLecture 28 - Defects in CrystalsLecture 29 - Defects in Crystals



www.digimat.in

Lecture 30 - Diffusion in SolidsLecture 31 - Diffusion in SolidsLecture 32 - Phase DiagramsLecture 33 - Phase DiagramsLecture 34 - Phase DiagramsLecture 35 - Phase DiagramsLecture 36 - Phase DiagramsLecture 37 - Phase TransformationsLecture 38 - Phase TransformationsLecture 39 - Phase TransformationsLecture 40 - Phase TransformationsLecture 41 - Phase TransformationsLecture 42 - Phase TransformationsLecture 43 - Phase TransformationsLecture 44 - Phase TransformationsLecture 45 - Phase Transformations



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Environmental Degradation of Materials

Subject Co-ordinator - Dr. Kallol Mondal



Lecture 1 - Introduction, Basic definition of corrosionLecture 2 - Forms of Degradation, Thermodynamics of corrosionLecture 3 - Thermodynamics of corrosionLecture 4 - Thermodynamics of corrosionLecture 5 - Thermodynamics of corrosion, Electrochemical series, Concentration cellLecture 6 - Reduction Potential series, Pourbaix diagramLecture 7 - Pourbaix diagramLecture 8 - Pourbaix diagramLecture 9 - Pourbaix diagram, Kinetics of corrosionLecture 10 - Kinetics of corrosion, Rate expression, Solved problemsLecture 11 - Solved problems on the corrosion rate, Exchange current densityLecture 12 - Exchange current density, Polarization, Activation Polarization, Tafel EquationLecture 13 - Activation Polarization, Concentration PolarizationLecture 14 - Concentration Polarization, Mixed Potential TheoryLecture 15 - Mixed Potential Theory, Explanation of corrosion events on the basis of Mixed potential theory, GalvanizationLecture 16 - Explanation of corrosion events on the basis of Mixed potential theory, Effect of impurity, Effect of area factorLecture 17 - Explanation of corrosion events on the basis of Mixed potential theory, Effect of area factor, Concentration polarization, PassivationLecture 18 - Passivation and Mixed potential theoryLecture 19 - Passivation and Mixed potential theoryLecture 20 - Different corrosion protection mechanisms, electrochemical ways of protection, cathodic protectionLecture 21 - Cathodic and anodic protectionLecture 22 - Anodic protection, Forms of corrosion, Factors of corrosionLecture 23 - Forms of corrosion, Uniform Corrosion, Galvanic corrosionLecture 24 - Galvanic corrosionLecture 25 - Crevice corrosionLecture 26 - Crevice corrosion, Pitting corrosionLecture 27 - Pitting corrosion, Intergranular corrosionLecture 28 - Intergranular corrosion, DealloyingLecture 29 - Dealloying, Erosion corrosion



www.digimat.in

Lecture 30 - Erosion corrosion, CavitationLecture 31 - Cavitation, Fretting corrosion, corrosion crackingLecture 32 - Stress corrosion crackingLecture 33 - Stress corrosion crackingLecture 34 - Biologically influenced corrosion, liquid metal attackLecture 35 - Corrosion protection, change of materials, effect of design of componentLecture 36 - Corrosion protection, change of environment, Inhibitors, coatingsLecture 37 - Oxidation and hot corrosion, pitting Bedworth ratio, thermodynamics of oxidationLecture 38 - Thermodynamics of oxidation, Ellingham diagram, oxidation kinetics and lawsLecture 39 - Oxide structure and OxidationLecture 40 - Hot corrosion, corrosion testing and failure analysis, linear polarizationLecture 41 - Degradation of composites, polymers and ceramics, corrosion and society



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Phase Diagrams in Materials Science and Engineering

Subject Co-ordinator - Dr. Krishanu Biswas



Lecture 1 - Introduction to the courseLecture 2 - Heterogeneous equilibrium and Free energy FormalismLecture 3 - Concept of Chemical PotentialLecture 4 - Phase Rule-ILecture 5 - Phase Rule-II and Single Component EquilibriaLecture 6 - Single Component Phase DiagramLecture 7 - Binary Phase Diagram - Isomorphous DiagramLecture 8 - Binary Ispmorphous SystemLecture 9 - Solidification of Isomorphous AlloysLecture 10 - Free Energy of Binary Isomorphous Phase DiagramLecture 11 - Phase Diagram of Binary Eutectic Systems Edit LessonLecture 12 - Solidification of eutectic, hypo-eutectic and hyper-eutectic alloys & their morphologies - ILecture 13 - Solidification of eutectic, hypo-eutectic and hyper-eutectic alloys & their morphologies - IILecture 14 - Phase diagrams of binary eutectic two terminal solid solutionLecture 15 - Phase diagrams of binary peritectic System - ILecture 16 - Phase diagrams of binary peritectic System - IILecture 17 - Phase diagrams of binary peritectic System with intermediate phasesLecture 18 - Intermediate PhasesLecture 19 - Introduction to Monotectic Phase DiagramLecture 20 - Microstructural Evolution of Monotectic Phase DiagramLecture 21 - Free Energy Composition diagrams for Monotectic systems and Syntactic phase diagramLecture 22 - Quasichemical theory - ILecture 23 - Quasichemical theory - IILecture 24 - Quasichemical theory Free enegy formalismLecture 25 - Solid state reactionLecture 26 - Introduction to Iron-Carbon phase diagramLecture 27 - Eutectoid transformation in Iron-Carbon phase diagramLecture 28 - Austenite to pearlite transformation in Iron-Carbon phase diagramLecture 29 - Hypo-eutectoid steels



www.digimat.in

Lecture 30 - Pearlite TransformationLecture 31 - Martensite Transformation - ILecture 32 - Martensite Transformation - IILecture 33 - Tempering of MartensiteLecture 34 - Bainite TransformationLecture 35 - TTT curves for SteelLecture 36 - Cast Iron - ILecture 37 - Cast Iron - IILecture 38 - Ductile Iron and Nodular IronLecture 39 - Malleable IronLecture 40 - Alloyed Cast IronLecture 41 - Phase Diagram for different Solid State ReactionLecture 42 - Phase Diagram of CeramicLecture 43 - Ternary Phase Diagram - ILecture 44 - Ternary Phase Diagram - IILecture 45 - Ternary Phase Diagram and Tie Line Construction - ILecture 46 - Ternary Phase Diagram and Tie Line Construction - IILecture 47 - Ternary Phase Diagram and Tie Line Construction - IIILecture 48 - Ternary Isomorphous Phase DiagramLecture 49 - Ternary Three Phase EquilibriaLecture 50 - Three Phase Equilibria in Ternary Systems - ILecture 51 - Three Phase Equilibria in Ternary Systems - IILecture 52 - Solidification Behaviour of Ternary AlloyLecture 53 - Three Phase EquilibriaLecture 54 - Ternary Four Phase Equilibria - ILecture 55 - Ternary Four Phase Equilibria - IILecture 56 - Solidification Behaviour of Ternary Eutectic AlloysLecture 57 - Phase Diagram of Ternary Eutectic with Terminal Solid SolutionLecture 58 - Ternary Peritectic ReactionLecture 59 - Quasi-peritectic ReactionLecture 60 - Case Studies on Ternary Phase Diagrams - ILecture 61 - Case Studies on Ternary Phase Diagrams - II



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Fundamentals of Material Processing - I

Subject Co-ordinator - Prof. Shashank Shekhar



Lecture 1 - IntroductionLecture 2 - Solidification (Casting)Lecture 3 - Solidification (Welding)Lecture 4 - Thermodynamics of SolidificationLecture 5 - Kinetics of Solidification (Homogeneous)Lecture 6 - Kinetics of Solidification (Heterogeneous)Lecture 7 - Heat FlowLecture 8 - Heat Flow (Continued...)Lecture 9 - Heat Flow (Insulating Mold Condition)Lecture 10 - Heat Flow (Insulating Mold Condition) (Continued...)Lecture 11 - Heat Flow (Interface Resistance Controlled Solidification)Lecture 12 - Heat Flow (Effect of Superheat)Lecture 13 - Heat Flow (Solidification of Alloys)Lecture 14 - Composition VariationLecture 15 - Composition Variation (Continued...)Lecture 16 - Complete and Limited Liquid DiffusionLecture 17 - Mixed Mode SolidificationLecture 18 - Mixed Mode Solidification and Zone RefiningLecture 19 - Zone Refining (Continued...)Lecture 20 - Cellular Solidification of Single Phase AlloyLecture 21 - Cellular Solidification of Single Phase Alloy (Continued...)Lecture 22 - Cellular Solidification of Single Phase Alloy (Continued...)Lecture 23 - Plane Front Solidification of Multiphase AlloyLecture 24 - Plane Front Solidification of Multiphase Alloy (Continued...)Lecture 25 - Fluid Flow ConsiderationsLecture 26 - Introduction to Powder ProcessingLecture 27 - Introduction to Powder Processing (Continued...)Lecture 28 - Powder characterizationLecture 29 - Powder Characterization Techniques



www.digimat.in

Lecture 30 - Powder Characterization using Surface AreaLecture 31 - Powder Characterization using Gas Permeability MethodLecture 32 - Powder ManufacturingLecture 33 - Powder Manufacturing (Continued...)Lecture 34 - Powder Manufacturing (Continued...)Lecture 35 - Powder ConsolidationLecture 36 - Powder Consolidation (Continued...)Lecture 37 - Particle PackingLecture 38 - Powder CompactionLecture 39 - Powder Compaction (Continued...)Lecture 40 - Sintering Theory



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Heat Treatment and Surface Hardening - I

Subject Co-ordinator - Dr. Kallol Mondal, Prof. Sandeep Sangal



Lecture 1 - Introduction to Heat Treatment and Importance of Material TetrahedronLecture 2 - Case studies in reference to Material tetrahedron T/t information and processingLecture 3 - Few more case studies in reference to processing with T/t modificationLecture 4 - Critical Definition and Phase Transformation Thermodynamics and Driving ForceLecture 5 - Thermodynamics of Phase Transformation Driving force of Phase TransformationLecture 6 - Thermodynamics of Phase Transformation and Driving Force for Phase TransformationLecture 7 - Finding Value of Driving Force (?G) and Single Component (liquid-solid)Lecture 8 - Finding Value of Driving Force (?G) and Nucleation Single Component (liquid-solid)Lecture 9 - Nucleation Treatment Single Component (Solid-Liquid) - ILecture 10 - Nucleation Treatment Single Component (Solid-Liquid) - IILecture 11 - Solved Problem on Nucleation rate and How to determine the value of ?sl Physical Concept & Interfacial EnergyLecture 12 - How to determine the value of ?sl (Physical Concept and Interfacial Energy)Lecture 13 - Interfacial Energy - ILecture 14 - Interfacial Energy - IILecture 15 - Heterogeneous Nucleation - ILecture 16 - Heterogeneous Nucleation - IILecture 17 - Solid - Solid Transformation and Nucleation rate - ILecture 18 - Solid - Solid Transformation and Nucleation rate - IILecture 19 - Phase Diagram and G vs X plot - ILecture 20 - Phase Diagram and G vs X plot - IILecture 21 - Phase Diagram and G vs X plot - IIILecture 22 - Introduction to Kinetics of Phase TransformationLecture 23 - Variation of ?G* and r* with UndercoolingLecture 24 - Nucleation rate - ILecture 25 - Nucleation Rate - IILecture 26 - Critical UndercoolingLecture 27 - Maximum nucleation rate for homogeneous nucleationLecture 28 - Maximum nucleation rate for heterogeneous nucleationLecture 29 - Nucleation kinetics in solid state



www.digimat.in

Lecture 30 - Interface controlled growthLecture 31 - Diffusion controlled growthLecture 32 - Avrami Kinetics - ILecture 33 - Avrami Kinetics - IILecture 34 - Avrami Kinetics - IIILecture 35 - Time-Temperature-Transformation (TTT) diagramLecture 36 - Diffusion in Solids - ILecture 37 - Diffusion in Solids - IILecture 38 - Diffusion in Solids - IIILecture 39 - Diffusion in Solids - IVLecture 40 - Applications of heat treatment



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Fundamentals of Material Processing - Part 2

Subject Co-ordinator - Prof. Shashank Shekhar, Prof. Jitesh J Thakkar



Lecture 1 - Introduction to Metal WorkingLecture 2 - Continuum MechanicsLecture 3 - Stress InvariantsLecture 4 - Strain Tensors and Mohr circle for strainsLecture 5 - Yield Stress CriterionLecture 6 - Effective Stress and StrainLecture 7 - Work Hardening and Flow BehaviourLecture 8 - Effect of Strain RateLecture 9 - Combined Effect of Strain, Strain Rate and TemperatureLecture 10 - Effect of TemperatureLecture 11 - Cold, Warm and Hot WorkingLecture 12 - Mechanics of Metal WorkingLecture 13 - Wire DrawingLecture 14 - Wire Drawing (Continued...)Lecture 15 - HodographsLecture 16 - Upper-Bound AnalysisLecture 17 - Plane Strain IndentationLecture 18 - Strain Calculation Models and FrictionLecture 19 - Types of FrictionLecture 20 - Effect of Friction in RollingLecture 21 - Vacuum TechnologyLecture 22 - Vacuum Technology (Continued...)Lecture 23 - Thermal EvaporationLecture 24 - Thermal Evaporation (Continued...)Lecture 25 - Thermal Evaporation (Continued...)Lecture 26 - Plasma PhysicsLecture 27 - Plasma Physics (Continued...)Lecture 28 - SputteringLecture 29 - Sputtering (Continued...)



www.digimat.in

Lecture 30 - Sputtering (Continued...)Lecture 31 - Chemical Vapor DepositionLecture 32 - Chemical Vapor Deposition (Continued...)Lecture 33 - Chemical Vapor Deposition (Continued...)Lecture 34 - Chemical Vapor Deposition (Continued...)Lecture 35 - Epitaxy, Molecular Beam Epitaxy and Atomic Layer DepositionLecture 36 - Adsorption and NucleationLecture 37 - Thin Film GrowthLecture 38 - Kinetics of Thin Film GrowthLecture 39 - Thin Film Morphology- Zone Structure ModelLecture 40 - Thin Film CharacterizationLecture 41 - Thin Film Characterization



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Advanced ceramics for strategic applications

Subject Co-ordinator - Prof. H.S. Maiti

Co-ordinating Institute - Central Glass and Ceramic Research Institute


Lecture 1 - IntroductionLecture 2 - Introduction (Continued...)Lecture 3 - Crystal StructureLecture 4 - Crystal Structure (Continued...)Lecture 5 - Crystal Structure (Continued...)Lecture 6 - Crystal Structure (Continued...)Lecture 7 - Defects in crystalline solidsLecture 8 - Defects in crystalline solids (Continued...)Lecture 9 - DislocationLecture 10 - Two and Three Dimensional DefectsLecture 11 - Electrical Conduction in ceramicsLecture 12 - Electrical Conduction in Ceramics (Continued...)Lecture 13 - Electrical Conduction in Ceramics (Continued...)Lecture 14 - Electrical Conduction in Ceramics (Continued...)Lecture 15 - Electrical Conduction in Ceramics (Continued...)Lecture 16 - Electrical Conduction in Ceramics (Continued...)Lecture 17 - Electrical Phenomenon in InsulatorsLecture 18 - Electrical Phenomenon in Insulators (Continued...)Lecture 19 - Ferroelectric , Piezoelectric and Pyroelectric CeramicsLecture 20 - Ferroelectric , Piezoelectric and Pyroelectric Ceramics (Continued...)Lecture 21 - Ferroelectric , Piezoelectric and Pyroelectric Ceramics (Continued...)Lecture 22 - Ferroelectric , Piezoelectric and Pyroelectric Ceramics (Continued...)Lecture 23 - Relaxor FerroelectricLecture 24 - SuperconductivityLecture 25 - Superconductivity (Continued...)Lecture 26 - Ceramic Gas SensorLecture 27 - Ceramic Gas Sensor (Continued...)Lecture 28 - Solid Oxide Fuel CellLecture 29 - Solid Oxide Fuel Cell (Continued...)



www.digimat.in

Lecture 30 - Solid Oxide Fuel Cell (Continued...)Lecture 31 - Hydrogen Generation through MIEC ReactorLecture 32 - Lithium Ion BatteryLecture 33 - Lithium Ion Battery (Continued...)Lecture 34 - Magnetic CeramicsLecture 35 - Magnetic Ceramics (Continued...)Lecture 36 - Magnetic Ceramics (Continued...)Lecture 37 - Magnetic Ceramics (Continued...)Lecture 38 - Sintering of CeramicsLecture 39 - Sintering of Ceramics (Continued...)Lecture 40 - Sintering of Ceramics (Continued...)Lecture 41 - Sintering of Ceramics (Continued...)Lecture 42 - Mechanical Properties of Ceramic MaterialsLecture 43 - Mechanical Properties of Ceramic Materials (Continued...)Lecture 44 - Mechanical Properties of Ceramic Materials (Continued...)Lecture 45 - Mechanical Properties of Ceramic Materials (Continued...)Lecture 46 - Structural Ceramics MaterialsLecture 47 - Bioceramics



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Non-ferrous Extractive Metallurgy

Subject Co-ordinator - Prof. H.S. Ray, Mr. L. Pugazhenthy

Co-ordinating Institute - IIT - Kharagpur | India Lead Zine Development Association


Lecture 1 - Brief History of Non-ferrous MetalLecture 2 - Brief History of Non-ferrous Metal (Continued...)Lecture 3 - Sources of Non-ferrous MetalLecture 4 - Mineral Benefication TechniquesLecture 5 - General Methods of Metal ExtractionLecture 6 - Principles of Carbon ReductionLecture 7 - Principles of HydrometallingLecture 8 - Principles of ElectrometallurgyLecture 9 - Electrometallurgy (Continued...) and Temkin Model for Fused SaltsLecture 10 - Refining of Metals - Chemical MethodsLecture 11 - Refining of Metals - Physical MethodsLecture 12 - Concluding part of Module - 4Lecture 13 - Concluding part of Module - 4 (Continued...)Lecture 14 - Module - 5 Extraction of Metals from Oxides, Extraction of MagnesiumLecture 15 - Extraction AluminiumLecture 16 - Extraction Aluminium (Continued...1)Lecture 17 - Extraction Aluminium (Continued...2)Lecture 18 - Extraction Aluminium (Continued...3)Lecture 19 - Extraction of TinLecture 20 - Extraction of Ferro AlloysLecture 21 - Module - 6 Extraction of Metals from Sulphides Extraction of CopperLecture 22 - Extraction of Copper (Continued...)Lecture 23 - Hydrometallurgy of CopperLecture 24 - Extraction of LeadLecture 25 - Extraction of Zinc-Imperial Smelting ProcessLecture 26 - Module - 7 Extraction of metals from halides, Extraction of reactor metalsLecture 27 - Extraction of reactor metals (Continued...1)Lecture 28 - Extraction of reactor metals (Continued...2)Lecture 29 - Extraction of Titanium



www.digimat.in

Lecture 30 - Extraction of Precious MetalsLecture 31 - Production of Secondary Metals and Treatment of WastesLecture 32 - Energy and Environment Related Issues in Nonferrous Metals ProductionLecture 33 - Energy and Environment Related Issues in Nonferrous Metals Production (Continued...1)Lecture 34 - Energy and Environment Related Issues in Nonferrous Metals Production (Continued...2)Lecture 35 - Energy and Environment Related Issues in Nonferrous Metals Production (Continued...3)Lecture 36 - Energy and Environment Related Issues in Nonferrous Metals Production (Continued...4)Lecture 37 - Energy and Environment Related Issues in Nonferrous Metals Production (Continued...5)Lecture 38 - Energy and Environment Related Issues in Nonferrous Metals Production (Continued...6)Lecture 39 - Nonferrous Metals in India - Unleashing its true potentialLecture 40 - Nonferrous Metals in India - Unleashing its true potential (Continued...)Lecture 41 - Review and SummaryLecture 42 - Review and Summary (Continued...1)Lecture 43 - Review and Summary (Continued...2)



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Principles of Physical Metallurgy

Subject Co-ordinator - Prof. R.N. Ghosh

Co-ordinating Institute - IIT - Kharagpur


Lecture 1 - IntroductionLecture 2 - Atomic Bond and Crystal StructureLecture 3 - Atomic Bond and Crystal Structure (Continued...1)Lecture 4 - Atomic Bond and Crystal Structure (Continued...2)Lecture 5 - Experimental Tools & TechniquesLecture 6 - Experimental Tools & Techniques (Continued...)Lecture 7 - Solidification of Pure MetalLecture 8 - Plastic Deformation of Pure MetalLecture 9 - Plastic Deformation of Pure Metal (Continued...)Lecture 10 - Crystal Defects in MetalsLecture 11 - Crystal Defects in Metals (Continued...1)Lecture 12 - Crystal Defects in Metals (Continued...2)Lecture 13 - Crystal Defects in Metals (Continued...3)Lecture 14 - Crystal Defects in Metals (Continued...4)Lecture 15 - Diffusion in SolidsLecture 16 - Diffusion in Solids (Continued...)Lecture 17 - Numerical Examples in DiffusionLecture 18 - Solidification of Binary AlloysLecture 19 - Solidification of Binary Alloys (Continued...1)Lecture 20 - Solidification of Binary Alloys (Continued...2)Lecture 21 - Solidification of Binary Alloys (Continued...3)Lecture 22 - Solidification of Binary Alloys (Continued...4)Lecture 23 - Iron-Carbon Phase DiagramLecture 24 - Iron-Carbon Phase Diagram (Continued...)Lecture 25 - Ternary Phase DiagramLecture 26 - Common Binary AlloysLecture 27 - Metal WorkingLecture 28 - Metal WorkingLecture 29 - Precipitation for Solid Solution



www.digimat.in

Lecture 30 - Precipitation for Solid Solution (Continued...)Lecture 31 - Heat Treatment of SteelLecture 32 - Heat Treatment of Steel (Continued...1)Lecture 33 - Heat Treatment of Steel (Continued...2)Lecture 34 - Heat Treatment of Steel (Continued...3)Lecture 35 - Heat Treatment of Steel (Continued...4)Lecture 36 - Heat Treatment of Steel (Continued...5)Lecture 37 - Surface HardeningLecture 38 - Structural SteelLecture 39 - Structural Steel (Continued...)Lecture 40 - Ultra High Strength SteelLecture 41 - Preferred OrientationLecture 42 - Metal Joining



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Processing of Semiconducting Materials

Subject Co-ordinator - Dr. Pallab Banerji



Lecture 1 - Introduction to Electronics MaterialsLecture 2 - Electrical Conductivity of MaterialsLecture 3 - Direct and Indirect Band SemiconductorsLecture 4 - Doping in SemiconductorsLecture 5 - Semiconductor StatisticsLecture 6 - Importance of DopingLecture 7 - Diffusion and Ion Implantation - ILecture 8 - Diffusion and Ion Implantation - IILecture 9 - Diffusion and Ion Implantation - IIILecture 10 - Elemental SemiconductorsLecture 11 - Compound SemiconductorsLecture 12 - Bulk Crystal Growth - ILecture 13 - Bulk Crystal Growth - IILecture 14 - Ga As Crystal GrowthLecture 15 - Defects in Crystals - ILecture 16 - Defects in Crystals - IILecture 17 - Band Gap Engineering - ILecture 18 - Band Gap Engineering - IILecture 19 - Chemical Vapour Deposition - ILecture 20 - Chemical Vapour Deposition - IILecture 21 - MOCVDLecture 22 - Molecular Beam Epitaxy - ILecture 23 - Molecular Beam Epitaxy - IILecture 24 - p - n JunctionLecture 25 - Carrier Transport in P - N JunctionLecture 26 - Characterization - ILecture 27 - Characterization - IILecture 28 - Optical Characterization - ILecture 29 - Metal-Semiconductor Contact - I



www.digimat.in

Lecture 30 - Metal-Semiconductor Contact - IILecture 31 - Applications of Metal-Semiconductor ContactLecture 32 - Oxidation - ILecture 33 - Oxidation - IILecture 34 - Different Types of Semiconductor - ILecture 35 - Oxidation - ILecture 36 - Oxidation - IILecture 37 - Dielectric FilmsLecture 38 - Low - K and High - K materialsLecture 39 - MetallizationLecture 40 - Materials for Photovoltaics



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Science and Technology of Polymers

Subject Co-ordinator - Prof. B. Adhikari



Lecture 1 - Basic Concepts on PolymersLecture 2 - Basic Concepts on Polymers (Continued...)Lecture 3 - Basic Concepts on Polymers (Continued...)Lecture 4 - Polymer Raw MaterialsLecture 5 - Principles of Polymer SynthesisLecture 6 - Principles of Polymer Synthesis (Continued...)Lecture 7 - Principles of Polymer Synthesis (Continued...)Lecture 8 - Principles of Polymer Synthesis (Continued...)Lecture 9 - Principles of Polymer Synthesis (Continued...)Lecture 10 - Principles of Polymer Synthesis (Continued...)Lecture 11 - Structure and Properties of Polymers (Continued...)Lecture 12 - Structure and Properties of Polymers (Continued...)Lecture 13 - Structure and Properties of Polymers (Continued...)Lecture 14 - Structure and Properties of Polymers (Continued...)Lecture 15 - Polymerization TechniquesLecture 16 - Polymerization Techniques (Continued...)Lecture 17 - Polymerization Techniques (Continued...)Lecture 18 - Polymer ProductsLecture 19 - Polymer Products (Continued...)Lecture 20 - Rubber ProductsLecture 21 - Rubber Products (Continued...)Lecture 22 - Conducting PolymersLecture 23 - Conducting Polymers (Continued...)Lecture 24 - Liquid Crystalline PolymersLecture 25 - Stimuli Responsive Polymer and its applicationLecture 26 - Stimuli Responsive Polymer and its application (Continued...)Lecture 27 - Polymeric Nanomaterials and Devices (Continued...)Lecture 28 - Polymeric Nanomaterials and Devices (Continued...)Lecture 29 - Polymeric Nanomaterials and Devices (Continued...)



www.digimat.in

Lecture 30 - Environmental Degradation of PolymersLecture 31 - Environmental Degradation of Polymers (Continued...)Lecture 32 - Polymer CompositesLecture 33 - Polymer Composites (Continued...)Lecture 34 - Polymer Composites (Continued...)Lecture 35 - Multicomponent Polymeric MaterialsLecture 36 - Multicomponent Polymeric Materials (Continued...)Lecture 37 - Multicomponent Polymeric Materials (Continued...)Lecture 38 - ViscoelasticityLecture 39 - Engineering and Speciality PolymersLecture 40 - Engineering and Speciality Polymers (Continued...)



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Advanced Materials and Processes

Subject Co-ordinator - Prof. B.S. Murty



Lecture 1 - Structure of Materials - Part ILecture 2 - Structure of Materials - Part IILecture 3 - Nano Crystalline Materials - Part ILecture 4 - Nano Crystalline Materials - Part IILecture 5 - Nano Crystalline Materials - Part IIILecture 6 - Nano Crystalline Materials - Part IVLecture 7 - Amorphous Materials - Part ILecture 8 - Amorphous Materials - Part IILecture 9 - Amorphous Materials - Part IIILecture 10 - Amorphous Materials - Part IVLecture 11 - Amorphous Materials - Part VLecture 12 - Quasicrystals - Part ILecture 13 - Quasicrystals - Part IILecture 14 - Nano Quasicrystals - Part ILecture 15 - Nano Quasicrystals - Part IILecture 16 - Rapid Solidification ProcessingLecture 17 - Mechanical AlloyingLecture 18 - Advanced AI Alloys - Part ILecture 19 - Advanced AI Alloys - Part IILecture 20 - Advanced AI Alloys - Part IIILecture 21 - Advanced AI Alloys - Part IV and Ti AlloysLecture 22 - Shape Memory AlloysLecture 23 - Strengthening Mechanisms - Part ILecture 24 - Strengthening Mechanisms - Part IILecture 25 - SuperalloysLecture 26 - In-Situ Composites - Part I



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Advanced Metallurgical Thermodynamics

Subject Co-ordinator - Prof. B.S. Murty

Co-ordinating Institute - IIT - Madras


Lecture 1 - Basic definitionsLecture 2 - Free energy, Stability, equilibrium in a unary systemLecture 3 - Effect of Pressure on equilibrium transformationsLecture 4 - Free energy of solutions, free energy-composition diagramsLecture 5 - Solution models, chemical potentialLecture 6 - Phase rule, free energy-composition diagrams and phase diagramsLecture 7 - Evolution of phase diagramsLecture 8 - Evolution of phase diagrams, miscibility gapLecture 9 - To concept, partition less solidificationLecture 10 - To concept, partition less solidification (Continued...)Lecture 11 - Eutectic solidification, glass formationLecture 12 - Kauzmann paradox, order of a transformation, glass forming abilityLecture 13 - Eutectic solidification, coupled growth, heterogeneous nucleationLecture 14 - Peritectic solidification, metastable phase diagramsLecture 15 - Errors in drawing phase diagrams, Fe-C vs. Fe-Fe3C phase diagramLecture 16 - Free energy of undercooled liquid, shape of nucleusLecture 17 - Solid state phase transformations - PrecipitationLecture 18 - PrecipitationLecture 19 - Precipitation - quasicrystalsLecture 20 - Precipitate coarsening, stability of a phase, spinodal decompositionLecture 21 - Spinodal decompositionLecture 22 - Eutectioid reactionLecture 23 - Eutectioid reaction (Continued...)Lecture 24 - Bainitic transformationLecture 25 - Kinetics of eutectoid transformationsLecture 26 - Martensitic TransformationLecture 27 - Martensitic transformation, order-disorder transformationLecture 28 - Miscibility gap in phase diagramsLecture 29 - Phase diagram calculations



www.digimat.in

Lecture 30 - Thermodynamics of heterogeneous systemsLecture 31 - Thermodynamics of heterogeneous systems (Continued...)



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Materials Characterization

Subject Co-ordinator - Dr. S. Sankaran



Lecture 1 - Properties of light, Image formationLecture 2 - Magnification and resolutionLecture 3 - Depth of field,focus and field of viewLecture 4 - Lens defects,filters and light microscopy introductionLecture 5 - Optical microscope demo., Bright field imaging, opaque specimen illuminationLecture 6 - Opaque stop microscopy, Phase contrast microscopyLecture 7 - Dark field microscopy, Polarization microscopyLecture 8 - Differential interference contrast and fluorescence microscopyLecture 9 - Sample preparation techniques for optical microscopyLecture 10A - Tutorial problems (Continuation...)Lecture 10 - Tutorial problemsLecture 11 - Introduction to scanning electron MicroscopyLecture 12 - Lens aberrations, Object resolution, Image qualityLecture 13 - Interaction between electrons and sample, Imaging capabilities, Structural analysis, Elemental analysisLecture 14 - SEM and its mode of operation, Effect of aperture size,Working distance,condenser lens strengthLecture 15 - SEM and its mode of operation- continuation, Relation between probe current and probe diameter, SummaryLecture 16 - Factors affecting Interaction volume, Demonstration of SEMLecture 17 - Image formation and interpretationLecture 18 - Image formation and interpretation continued, EDS, WDSLecture 19 - Special contrast mechanisms, Monte Carlo simulations of Interaction volumeLecture 20 - Electron channeling contrast imaging (ECCI), Electron back scattered diffraction(EBSD)-Theory & instrument demonstrationLecture 21 - Tutorial Problems on SEMLecture 22 - Basics of X-ray emission from source, electron excitation and X-ray interaction with materials in generalLecture 23 - Properties of X-raysLecture 24 - Bragg's Law DerivationLecture 25 - Diffraction relationship with reciprocal spaceLecture 26 - X-ray scatteringLecture 27 - Factors affecting intensities of X-ray peaksLecture 28 - Factors affecting intensities of X-ray peaks- continuation



www.digimat.in

Lecture 29 - Effect of crystallite size and strain on intensity of X-raysLecture 30 - Profile fit, Factors affecting peak brodeningLecture 31 - Indexing of diffraction pattern, Quantitative analysisLecture 32 - Indexing, Quantitative analysis-continuation, Residual stress measurementsLecture 33 - XRD and Residual stress measurement- lab demonstrationLecture 34 - Introduction to Transmission Electron Microscopy (TEM)Lecture 35 - Fundementals of Transmission Electron Microscopy (TEM)Lecture 36 - Basics of Diffraction-1Lecture 37 - Basics of Diffraction-2Lecture 38 - TEM imaging-1Lecture 39 - TEM imaging-2Lecture 40 - TEM instrument demonstrationLecture 41 - TEM sample preparation-1Lecture 42 - TEM sample preparation-2Lecture 43 - XRD Tutorial - 1Lecture 44 - XRD tutorial - 2Lecture 45 - TEM Tutorial - 1Lecture 46 - TEM Tutorial - 2Lecture 47 - Quantitative metallography - Tutorial 1Lecture 48 - Quantitative metallography - Tutorial 2Lecture 49 - Quantitative metallography - Tutorial 3Lecture 50 - Quantitative metallography - Tutorial 4Lecture 51 - Quantitative metallography - Tutorial 5Lecture 52 - Quantitative metallography - Tutorial 6Lecture 53 - Quantitative metallography - Tutorial 7



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Physics of Materials

Subject Co-ordinator - Dr. Prathap Haridoss



Lecture 1 - IntroductionLecture 2 - Properties of MaterialsLecture 3 - Thermal ExpansionLecture 4 - Measuring Electrical ConductivityLecture 5 - Free Electron GasLecture 6 - The Ideal GasLecture 7 - Drude ModelLecture 8 - Drude ModelLecture 9 - Drude ModelLecture 10 - Drude ModelLecture 11 - Large Systems and Statistical MechanicsLecture 12 - Maxwell Boltzmann StatisticsLecture 13 - Classical Particles and Quantum ParticlesLecture 14 - History of Quantum Mechanics - 1Lecture 15 - History of Quantum Mechanics - 2Lecture 16 - Introduction to Drude Sommerfeld modelLecture 17 - Fermi-Dirac Statistics - Part 1Lecture 18 - Fermi-Dirac Statistics - Part 2Lecture 19 - Features of the Fermi Dirac Distribution FunctionLecture 20 - Maxwell-Boltzmann Distribution Vs Fermi-Dirac DistributionLecture 21 - Anisotropy and Periodic Potential in a SolidLecture 22 - Confinement and Quantization - Part 1Lecture 23 - Confinement and Quantization - Part 2Lecture 24 - Density of StatesLecture 25 - Fermi Energy, Fermi Surface, Fermi TemperatureLecture 26 - Electronic Contribution to Specific Heat at Constant VolumeLecture 27 - Reciprocal Space-1Lecture 28 - Reciprocal Space-2Lecture 29 - Reciprocal Space-3



www.digimat.in

Lecture 30 - Wigner Seitz Cell and Introduction to Brillouin ZonesLecture 31 - Brillouin Zones, Diffraction, and Allowed Energy LevelsLecture 32 - E Vs k, Brillouin Zones and the Origin of BandsLecture 33 - Calculating Allowed Energy Bands and Forbidden Band GapsLecture 34 - Bands; Free Electron Approximation, Tight Binding ApproximationLecture 35 - SemiconductorsLecture 36 - Magnetic PropertiesLecture 37 - Electron Compounds; Phonons, Optoelectronic MaterialsLecture 38 - SuperconductivityLecture 39 - Bose-Einstein StatisticsLecture 40 - Physics of Nano Scale Materials; Course Summary



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - Electronic materials, devices, and fabrication

Subject Co-ordinator - Prof. Parasuraman S



Lecture 1 - Metals, semiconductors and insulatorsLecture 2 - Introduction to semiconductorsLecture 3 - Density of states and Fermi-Dirac statisticsLecture 4 - Assignment 1 - Bonding, DOS, and Fermi statisticsLecture 5 - Intrinsic semiconductorsLecture 6 - Intrinsic semiconductors - conductivityLecture 7 - Assignment 2 - Intrinsic semiconductorsLecture 8 - Extrinsic semiconductorsLecture 9 - Extrinsic semiconductors - Fermi levelLecture 10 - Extrinsic semiconductors - conductivityLecture 11 - Assignment 3 - Extrinsic semiconductorsLecture 12 - Metal-semiconductor junctionsLecture 13 - Assigment 4 - Metal-semiconductor junctionsLecture 14 - pn junctions in equilibriumLecture 15 - pn junctions under biasLecture 16 - pn junction breakdown and heterojunctionsLecture 17 - Assignment 5 - pn junctionsLecture 18 - TransistorsLecture 19 - MOSFETsLecture 20 - Assignment 6 - transistorsLecture 21 - Optoelectronic devicesLecture 22 - Optoelectronic devicesLecture 23 - Optoelectronic devicesLecture 24 - Optoelectronic devicesLecture 25 - Optoelectronic devicesLecture 26 - Assignment 7 - optical propertiesLecture 27 - Assignment 8 - optoelectronic devicesLecture 28 - Semiconductor manufacturingLecture 29 - Si wafer manufacturing



www.digimat.in

Lecture 30 - IC device manufacturingLecture 31 - LayeringLecture 32 - DopingLecture 33 - LithographyLecture 34 - Etching and deposition (growth)Lecture 35 - Metallization and polishingLecture 36 - Process and device evaluationLecture 37 - Productivity and process yieldLecture 38 - Clean room design and contamination controlLecture 39 - Devices and IC formationLecture 40 - IC circuit logic and packaging



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Fundamentals of optical and scanning electron microscopy

Subject Co-ordinator - Dr. S. Sankaran



Lecture 1 - Properties of light, Image formationLecture 2 - Magnification and resolutionLecture 3 - Depth of field, focus and field of viewLecture 4 - Lens defects, filters and light microscopy introductionLecture 5 - Optical microscope demo., Bright field imaging, opaque specimen illuminationLecture 6 - Opaque stop microscopy, Phase contrast microscopyLecture 7 - Dark field microscopy, Polarization microscopyLecture 8 - Differential interference contrast and fluorescence microscopyLecture 9 - Sample preparation techniques for optical microscopyLecture 10 - Tutorial problemsLecture 11 - Tutorial problems (Continued...)Lecture 12 - Introduction to scanning electron MicroscopyLecture 13 - Lens aberrations, Object resolution, Image qualityLecture 14 - Interaction between electrons and sample, Imaging capabilities, Structural analysis, Elemental analysisLecture 15 - SEM and its mode of operation, Effect of aperture size,Working distance,condenser lens strengthLecture 16 - SEM and its mode of operation- continuation, Relation between probe current and probe diameter, SummaryLecture 17 - Factors affecting Interaction volume, Demonstration of SEMLecture 18 - Image formation and interpretationLecture 19 - Image formation and interpretation continued, EDS, WDSLecture 20 - Special contrast mechanisms, Monte Carlo simulations of Interaction volumeLecture 21 - Electron channeling contrast imaging (ECCI), Electron back scattered diffraction (EBSD)-Theory & instrument demonstrationLecture 22 - Tutorial Problems on SEM



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Fundamentals of electronic materials and devices

Subject Co-ordinator - Prof. Parasuraman S



Lecture 1 - Electronic MaterialsLecture 2 - Semiconductors - IntroductionLecture 3 - Electron statistics in a solidLecture 4 - Worked numericals on week 1 lessonsLecture 5 - Intrinsic semiconductorsLecture 6 - Intrinsic semiconductors - conductivityLecture 7 - Optional - worked assignment on intrinsic semiconductorsLecture 8 - Extrinsic semiconductors - IntroductionLecture 9 - Extrinsic semiconductors - Fermi levelLecture 10 - Extrinsic semiconductors - MobilityLecture 11 - Worked assignment on extrinsic semiconductorsLecture 12 - Metal-semiconductor junctionsLecture 13 - pn junctions in equilibriumLecture 14 - Optional - worked assignment on metal-semiconductor junctionsLecture 15 - pn junctions under biasLecture 16 - Junction breakdown and heterojunctionsLecture 17 - Worked assignment on pn junctionsLecture 18 - Transistors - overviewLecture 19 - MOSFETsLecture 20 - Worked assignment on transistorsLecture 21 - Optoelectronic devices - IntroductionLecture 22 - Light emitting diodesLecture 23 - Solid state semiconductor lasersLecture 24 - Optional - worked assignment on optical propertiesLecture 25 - PhotodetectorsLecture 26 - Solar cellsLecture 27 - Worked assignment on optoelectronic devices



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Introduction to Reciprocal Space and its use in Solids

Subject Co-ordinator - Dr. Prathap Haridoss



Lecture 1 - Reciprocal space; Definition and PropertiesLecture 2 - Condition for DiffractionLecture 3 - Worked out examplesLecture 4 - Ewald Sphere and lattices in reciprocal spaceLecture 5 - Wigner Sietz cells and Brillouin ZonesLecture 6 - Worked out exmaplesLecture 7 - Brillouin Zones, Diffraction and allowed energy levelsLecture 8 - E Vs K, Brillouin zones and the Origin of BandsLecture 9 - Week 3 Worked out examplesLecture 10 - Reciprocal space as Fourier transform of real latticeLecture 11 - Alternate notation of reciprocal space



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Analysis and Modeling of Welding

Subject Co-ordinator - Dr. G. Phanikumar



Lecture 1 - Introduction to fusion welding processesLecture 2 - Introduction to fusion welding processesLecture 3 - Heat sources - Part 1/2Lecture 4 - Heat sources - Part 2/2Lecture 5 - Heat removalLecture 6 - Thermal Modelling - Part 1/2Lecture 7 - Thermal Modelling - Part 2/2Lecture 8 - Zones in a weldmentLecture 9 - Analytical Solutions to Weld Thermal FieldLecture 10 - Conduction to Keyhole modeLecture 11 - Fluid flow modelling - Part 1/2Lecture 12 - Fluid flow modelling - Part 2/2Lecture 13 - Solute transfer modelling - Part 1/2Lecture 14 - Solute transfer modelling - Part 2/2Lecture 15 - Solute segregation profile - Part 1/2Lecture 16 - Solute segregation profile - Part 2/2Lecture 17 - Microstructure Formation in Fusion WeldsLecture 18 - Numerical Solutions to Thermal Field and Fluid Flow in Welding - Part 1Lecture 19 - Numerical Solutions to Thermal Field and Fluid Flow in Welding - Part 2Lecture 20 - Dissimilar Welding



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Theory and Practice of Non Destructive Testing

Subject Co-ordinator - Dr. Ranjit Bauri



Lecture 1 - Visual optical methodLecture 2 - Dye Penetrant Testing - 1Lecture 3 - Dye Penetrant Testing - 2Lecture 4 - Dye Penetrant Testing - 3Lecture 5 - Dye Penetrant Testing - 4Lecture 6 - Magnetic particle testing - 1Lecture 7 - Magnetic particle testing - 2Lecture 8 - Magnetic particle testing - 3Lecture 9 - Magnetic particle testing - 4Lecture 10 - Magnetic particle testing - 5Lecture 11 - Eddy current testing - 1Lecture 12 - Eddy current testing - 2Lecture 13 - Eddy current testing - 3Lecture 14 - Eddy current testing - 4Lecture 15 - Eddy current testing - 5Lecture 16 - Ultrasonic testing - 1Lecture 17 - Ultrasonic testing - 2Lecture 18 - Ultrasonic testing - 3Lecture 19 - Ultrasonic testing - 4Lecture 20 - Ultrasonic testing - 5Lecture 21 - Ultrasonic testing - 6Lecture 22 - Ultrasonic testing - 7Lecture 23 - Ultrasonic testing - 8Lecture 24 - Ultrasonic testing - 9Lecture 25 - Ultrasonic testing - 10Lecture 26 - Acoustic Emission Testing - 1Lecture 27 - Acoustic Emission Testing - 2Lecture 28 - Acoustic Emission Testing - 3Lecture 29 - Acoustic Emission Testing - 4



www.digimat.in

Lecture 30 - Acoustic Emission Testing - 5Lecture 31 - Radiography - 1Lecture 32 - Radiography - 2Lecture 33 - Radiography - 3Lecture 34 - Radiography - 4Lecture 35 - Radiography - 5Lecture 36 - Radiography - 6Lecture 37 - Radiography - 7Lecture 38 - Radiography - 8Lecture 39 - Radiography - 9Lecture 40 - Radiography - 10



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Defects in Materials

Subject Co-ordinator - Prof. Sundararaman M



Lecture 1 - Introduction to defects in materialsLecture 2 - 1-D LatticeLecture 3 - 2-D LatticeLecture 4 - 3-D Lattice - aLecture 5 - 3-D Lattice - bLecture 6 - 3-D Lattice - cLecture 7 - 3-D CrystalsLecture 8 - Types of Point DefectsLecture 9 - Vacancy Concentration Determination - 1Lecture 10 - Vacancy Concentration Determination - 2Lecture 11 - Point Defect InterstitialLecture 12 - Transforamtion of co-ordinatesLecture 13 - Tensor - 1Lecture 14 - Tensor - 2Lecture 15 - StrainLecture 16 - StressLecture 17 - Description of Dislocation - 1Lecture 18 - Description of Dislocation - 2Lecture 19 - Stress field around DislocationLecture 20 - Self Energy of DislocationLecture 21 - Force on DislocationLecture 22 - Forces Between DislocationLecture 23 - Chemical Force on DislocationLecture 24 - Perfect Dislocation in FCC StructuresLecture 25 - Instrinsic Stacking Faults in FCCLecture 26 - Extrinsic Faults and Thompson Tetrahedron in FCCLecture 27 - Dislocations in BCC and HCPLecture 28 - Dislocations in Ordered Alloys and Dislocation Dislocation InteractionLecture 29 - Twinning - 1



www.digimat.in

Lecture 30 - Twinning - 2Lecture 31 - Martensitic Transformation - 1Lecture 32 - Martensitic Transformation - 2Lecture 33 - Interfaces - 1Lecture 34 - Interfaces - 2Lecture 35 - Defect Interaction and Strength



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Surface Engineering of Nanomaterials

Subject Co-ordinator - Prof. Kaushik Pal

Co-ordinating Institute - IIT - Roorkee


Lecture 1 - Tribology and Its ClassificationLecture 2 - Friction TribologyLecture 3 - Wear and CorrosionLecture 4 - LubricationLecture 5 - Effect of Tribology on Surface of NanomaterialsLecture 6 - Conventional Surface EngineeringLecture 7 - Types of Surface ModificationsLecture 8 - Physical ModificationsLecture 9 - Chemical ModificationsLecture 10 - Applications of Surface Engineering towards NanomaterialsLecture 11 - Deposition and Surface Modification MethodsLecture 12 - Physical Vapour Deposition (PVD)Lecture 13 - Chemical Vapour Deposition (CVD)Lecture 14 - Advanced Surface Modification PracticesLecture 15 - Advantages of Deposition for Surface ModificationLecture 16 - Synthesis, Processing and Characterization of Nano-structured CoatingsLecture 17 - Functional CoatingsLecture 18 - Advanced Coating PracticesLecture 19 - Characterization of Nano-coatingsLecture 20 - Applications of Nano-coatingsLecture 21 - Need of Advanced Methods for Surface and Coating TestingsLecture 22 - Size Dependency in Nanostructures of NanocoatingsLecture 23 - Size Effect in Electrochemical Properties of Nanostructured CoatingsLecture 24 - Size Effect in Mechanical Properties of Nanostructured CoatingsLecture 25 - Size Effect in Physical and Other Properties of Nanostructured CoatingsLecture 26 - Thin Films for Surface Engineering of NanomaterialsLecture 27 - Sputtering TechniquesLecture 28 - Evaporation ProcessesLecture 29 - Thin Film Deposition through Gas Phase Techniques



www.digimat.in

Lecture 30 - Liquid Phase TechniquesLecture 31 - Microencapsulation ProcessesLecture 32 - MicroencapsulationLecture 33 - Plating of Nanocomposite Coatings - ILecture 34 - Plating of Nanocomposite Coatings - IILecture 35 - Advantages of Microencapsulation over Other Conventional MethodsLecture 36 - Current Trends in Surface Modification of Nanomaterials - Part-1Lecture 37 - Current Trends in Surface Modification of Nanomaterials - Part-2Lecture 38 - Current Trends in Surface Modification of Nanomaterials - Part-3Lecture 39 - Modified NanomaterialsLecture 40 - Main Problems in Synthesis of Modified Nanomaterials



www.digimat.in

NPTEL Video Course - Metallurgy and Material Science - NOC:Biomaterials for Bone Tissue Engineering Applications

Subject Co-ordinator - Prof. Bikramjit Basu

Co-ordinating Institute - IISc - Bangalore


Lecture 1 - IntroductionLecture 2 - BiomaterialLecture 3 - BiocompatibilityLecture 4 - Host responseLecture 5 - Tissue EngLecture 6 - ScaffoldLecture 7 - Bone structureLecture 8 - Bone propertiesLecture 9 - Implant - ILecture 10 - Implant - IILecture 11 - ProteinsLecture 12 - Cell structureLecture 13 - Bacteria structureLecture 14 - Antibacterial assayLecture 15 - Cell fate processesLecture 16 - Cell divisionLecture 17 - Cell differentiationLecture 18 - Stem cellsLecture 19 - OsseointegrationLecture 20 - In vivo testingLecture 21 - Cell-material interactionLecture 22 - Cell-signallingLecture 23 - In vitro testingLecture 24 - Cytotoxicity assaysLecture 25 - Biocompatibility assayLecture 26 - Clinical trials - ILecture 27 - Clinical trials - IILecture 28 - Metal manufacturingLecture 29 - Ceramics manufacturing



www.digimat.in

Lecture 30 - Polymers manufacturingLecture 31 - Additive manufacturingLecture 32 - HA-Ti-Toughness, Cell functionalityLecture 33 - HA-CaTiO 3 developmentLecture 34 - HA- BaTiO 3 Functional PropLecture 35 - HA-Ag antimicrob and cell viabilityLecture 36 - HA-ZnO, Cell fate and antimicrobialLecture 37 - Dental ceramics processingLecture 38 - Sr-based glass CeramicsLecture 39 - Acetabular socket (Compression mold)Lecture 40 - ZTA femoral ball head fabrication



www.digimat.in

Documents

NPTEL Video Lecture Topic List - Created by LinuXpert · PDF file · 2017-07-04Lecture 5 - Exercise on ... Introduction to Mineral Beneficiation Lecture 11 ... Exercises in Mineral