Upload
others
View
9
Download
1
Embed Size (px)
Citation preview
Make Your Entire Valve Box IRON– Not Just The Frame And Cover! Valve Box Stabilizer
Available in these colors
Concrete boxes have an iron ring and cover for durability.Bingham & Taylor All-Iron valve boxes take durability one step higher,with construction that is 100% cast iron, for easiest install and longest service life.
• Designed to �t with all round valve box bells and bases, both cast iron and plastic valve boxes.
• Prevents intrusion of dirt, back�ll, or sand from underneath.• Stabilizes plastic and cast iron valve boxes.• All down force transferred to ground surface, not the buried valve or pipe.• The patented design assures proper alignment and protection of the
valve operating nut.• Settling and shifting valve box issues are eliminated.
When ordering, please follow chart to specify valve type and base size.
SPECIFICATIONS
Valve Type
Poly Valve
Poly Valve
Steel Valve
Steel Valve
Base Size
#6 Base
Standard 8” Bottom
#6 Base
Standard 8” Bottom
Part Number
ADP4001006P
ADP4001002P
ADP5001006S
ADP5001002S
For Poly or Steel Gas and Water Valves
The Mark V Series is designed for every industry incorporating underground valves.
It is the stand-alone replacement for concrete access boxes, also larger diameter valve boxes (8" PVC) for deeper bury and minimum 8" clear opening to valve.
Engineered speci�cally for heavy tra�c applications, it will not degrade like concrete, so Total Cost of Ownership is less.
KEY FEATURES INCLUDE: BENEFITS INCLUDE:
• Cast iron is less likely to be damaged during installation and while in use.
• Installation is more e�cient and less costly.
• Adaptable / e�cient installations.
• Lighter weight satis�es employee weight lift restrictions, minimizes strains and injuries.
• Better for employees and installers; fewer workman’s comp issues.
• Lids and boxes are durable and secure while providing easy access.
• Lid stays secure without set screws.
• Multiple industry use. Quick turnaround on custom lids, thanks to in-house pattern shop and foundry.
• Meets H-20/HS-20 heavy duty tra�c load and airport / runway load requirements.
• Meets the requirements of ASTM A 48 Class 35B
• Reduced inventory.
• Cast Iron replaces less durable concrete.• Heavy tra�c design 4" deep skirt.
• Easy installation, no concrete apron required.
• Paving adapters / risers available: 1", 2", 3".
• Major weight advantage: Mark V weighs34 lbs; concrete weighs 70% more: 58 lbs
• Lids available: Standard Lid w/ 2" skirt (16 lbs) Heavy Duty Lid w/ 4" skirt (20 lbs) Locking Lid (16 lbs)
• Custom lids for all your needs: WATER, SEWER, TEST, CP TEST, ANODE, GAS, etc.
• Performance rating: meets AASHTO M306 andFAA AC 150/5320-6E load requirements.
• Universal design: round shaped Triangle Logo“RECLAIM” lid available.
Cost
($)
Years0 20
• Bingham & Taylor• Other brands
Cost of Ownership over time
Heavy Traffic Valve BoxesMark Series
Manufactured in the USASince 1849
“Lighter weight, longer life, lower TCO!”
Dennis Quinn: Director of Mid-Atlantic, New Englandand Canada Sales, Office #540-825-8334 ext. 116Cell #540-219-4596 - [email protected]
Matt Haan: Director of Southeast US Sales, Cell #[email protected]
Perry Hyde: Director of Sales & Marketing,Office #540-825-8334 ext. 117 - Cell #540-229-1882 [email protected]
Brad Washburn: Northeastern U.S. Sales Manager,Office #540-825-8334 ext. 137 - Cell #[email protected]
Brandon Wheeler: Director of Central US Sales, Cell # 918-319-7900 [email protected]
Bingham & Taylor • Tel (540) 825.8334 • Fax (540) 825.2173 • www.binghamandtaylor.com
Mark deLancellotti: Director of Western Region Sales, Office #540-825-8334 ext. 138Cell #540-229-2599 [email protected]
Make Your Entire Valve Box IRON – Not Just The Frame And Cover! Valve Box Stabilizer
Available in these colors
Concrete boxes have an iron ring and cover for durability.Bingham & Taylor All-Iron valve boxes take durability one step higher,with construction that is 100% cast iron, for easiest install and longest service life.
• Designed to �t with all round valve box bells and bases, both cast iron and plastic valve boxes.• Prevents intrusion of dirt, back�ll, or sand from underneath.• Stabilizes plastic and cast iron valve boxes.• All down force transferred to ground surface, not the buried valve or pipe.• The patented design assures proper alignment and protection of the valve operating nut.• Settling and shifting valve box issues are eliminated.
When ordering, please follow chart to specify valve type and base size.
SPECIFICATIONS
Valve Type
Poly Valve
Poly Valve
Steel Valve
Steel Valve
Base Size
#6 Base
Standard 8” Bottom
#6 Base
Standard 8” Bottom
Part Number
ADP4001006P
ADP4001002P
ADP5001006S
ADP5001002S
For Poly or Steel Gas and Water Valves
The Mark V Series is designed for every industry incorporating underground valves.
It is the stand-alone replacement for concrete access boxes, also larger diameter valve boxes (8" PVC) for deeper bury and minimum 8" clear opening to valve.
Engineered speci�cally for heavy tra�c applications, it will not degrade like concrete, so Total Cost of Ownership is less.
KEY FEATURES INCLUDE: BENEFITS INCLUDE:
• Cast iron is less likely to be damaged during installation and while in use.
• Installation is more e�cient and less costly.
• Adaptable / e�cient installations.
• Lighter weight satis�es employee weight lift restrictions, minimizes strains and injuries.
• Better for employees and installers; fewer workman’s comp issues.
• Lids and boxes are durable and secure while providing easy access.
• Lid stays secure without set screws.
• Multiple industry use. Quick turnaround on custom lids, thanks to in-house pattern shop and foundry.
• Meets H-20/HS-20 heavy duty tra�c load and airport / runway load requirements.
• Meets the requirements of ASTM A 48 Class 35B
• Reduced inventory.
• Cast Iron replaces less durable concrete.• Heavy tra�c design 4" deep skirt.
• Easy installation, no concrete apron required.
• Paving adapters / risers available: 1", 2", 3".
• Major weight advantage: Mark V weighs34 lbs; concrete weighs 70% more: 58 lbs
• Lids available: Standard Lid w/ 2" skirt (16 lbs) Heavy Duty Lid w/ 4" skirt (20 lbs) Locking Lid (16 lbs)
• Custom lids for all your needs: WATER, SEWER, TEST, CP TEST, ANODE, GAS, etc.
• Performance rating: meets AASHTO M306 andFAA AC 150/5320-6E load requirements.
• Universal design: round shaped Triangle Logo“RECLAIM” lid available.
Cost
($)
Years0 20
• Bingham & Taylor• Other brands
Cost of Ownership over time
Heavy Traffic Valve BoxesMark Series
Manufactured in the USASince 1849
“Lighter weight, longer life, lower TCO!”
Dennis Quinn: Director of Mid-Atlantic, New Englandand Canada Sales, Office #540-825-8334 ext. 116Cell #540-219-4596 - [email protected]
Matt Haan: Director of Southeast US Sales, Cell #[email protected]
Perry Hyde: Director of Sales & Marketing,Office #540-825-8334 ext. 117 - Cell #540-229-1882 [email protected]
Brad Washburn: Northeastern U.S. Sales Manager,Office #540-825-8334 ext. 137 - Cell #[email protected]
Brandon Wheeler: Director of Central US Sales, Cell # 918-319-7900 [email protected]
Bingham & Taylor • Tel (540) 825.8334 • Fax (540) 825.2173 • www.binghamandtaylor.com
Mark deLancellotti: Director of Western Region Sales, Office #540-825-8334 ext. 138Cell #540-229-2599 [email protected]
Mark V Mark VTB Mark VII
DESCRIPTION PART NUMBER WEIGHT
Mark V 10" Paving Adapter 1" Height (aka Riser /Grade Ring)
CUL10AMV1 7 lbs
Mark V 10" Paving Adapter2" Height (aka Riser /Grade Ring)
CUL10AMV2 15 lbs
CUL10AMV3 26 lbsMark V 10" Paving Adapter3" Height (aka Riser /Grade Ring)
DESCRIPTION PART NUMBER WEIGHT
Mark V 10" Rim Heavy(Without Flange)
CUL10RHVY 34 lbs
Mark V 10" Rim Heavy(With Flange)
CUL10RHVYF 44 lbs
DESCRIPTION WEIGHT
Mark V 10" Lid StandardWater
16 lbs
Mark V 10" Lid StandardCP Test
16 lbs
Mark V 10" Lid Heavyw/ 4" Skirt Water
20 lbs
Mark V 10" Lid Heavyw/ 4" Skirt CP Test
20 lbs
Mark V 10" Lid Heavy Locking Water w/ bar & bolt
16 lbs
PART NUMBER
CUL10LHVYW
CUL10LHVYCPT
CUL10LHVY4W
CUL10LHVY4CPT
I10LBHVYWL
Please inquire for box assembly part numbers.
Please inquire for box assembly part numbers.
The Mark V Heavy Triangle Box offers the benefits and features of the standard Mark V, in a triangle configuration.
The Mark VII Heavy Traffic Box offers the same internal and overall height dimensions as the Mark V Heavy Traffic Box, with a larger 12" lid.
DESCRIPTION WEIGHT
10" Mark V Tri Lid Water 20.5 lbs
10" Mark V Tri Lid Sewer 20.5 lbs
10" Mark V Tri Lid Reclaim Water 20.5 lbs
10" Mark V Tri Lid CVWD-RW 20.5 lbs
10" Mark V Tri Lid CVWD-RW Powder Coat Purple
20.5 lbs
PART NUMBER
CUL10LTW
CUL10LTS
DESCRIPTION WEIGHT
10" Mark V Tri Lock Water, Powder Coat Blue
20.5 lbs
10" Mark V Tri Lock IRWD RW 20.5 lbs
PART NUMBER
CUL10LTLCVWDW
CUL10LTLIRWD-RW
DESCRIPTION WEIGHT
10" Heavy Mark V Tri Rim W/Flange 55.5 lbs
10" Heavy Mark V Tri Rim W/Flange IRWD
55.5 lbs
PART NUMBER
GRE10RTF
GRE10RTFIRWD
DESCRIPTION WEIGHT
12" Lid Mark VII – Long Skirt Sewer
26.0 lbs
12" Lid Mark VII – Long Skirt Water
26.0 lbs
PART NUMBER
GRE12LHVYSLS
DESCRIPTION WEIGHT
12" Heavy Mark VII Rim W/Flange Class 35
50.0 lbs
PART NUMBER
CUL12RHVYF
GRE12LHVYWLS
DESCRIPTION WEIGHT
12" Lid Mark VII – 2.5" Skirt Water - OL
16.5 lbs
12" Lid Mark VII – 2.5" Skirt Water - OR
16.5 lbs
PART NUMBER
CUL12LHVYW-OL
CUL12LHVYW-OR
12" Lid Mark VII – 2.5" Skirt 16.5 lbsGRE12LHVY4W
Please inquire for box assembly part numbers.
DESCRIPTION WEIGHT
Mark VII 12" Paving Adapter 1 10.7 lbs
Mark VII 12" Paving Adapter 2 18.7 lbs
PART NUMBER
CUL12AMV1
CUL12AMV2
Mark VII 12" Paving Adapter 3 32.0 lbsCUL12AMV3
CUL10LTRW
CUL10LTCVWD-RW
CUL10LTCVWD-RWP
10" Mark V Tri Lid CVWD-RW Sewer Force Main Unpainted
20.5 lbs
10" Mark V Tri Lid CVWD-RWSFM – Powder Coat Green
20.5 lbs
10" Mark V Tri Lid CVWD-RW Water - Unpainted
20.5 lbs
10" Mark V Tri Lid CVWD-RW Water – Powder Coat Red
20.5 lbs
CUL10LTCVWD-SFM
CUL10LTCVWD-SFM-G
CUL10LTCVWD-W
10" Mark V Tri Lid CVWD-RW Water – Powder Coat Silver
20.5 lbs
10" Mark V Tri Lid CVWD-RWWater – Powder Coat Yellow
20.5 lbs
10" Mark V Tri Lid CVWD-RWWater – Powder Coat Blue
20.5 lbs
10" Mark V Tri Lid IRWD Brine 20.5 lbs
CUL10LTCVWD-W-S
CUL10LTCVWD-W-Y
CUL10LTCVWD-W-B
CUL10LTIRWDBR
10" Mark V Tri Lid Raw Water 20.5 lbs
10" Mark V Tri Lid RW 20.5 lbs
CUL10LTIRWDRW
CUL10LTIRWDRW
CUL10LTCVWD-W-R
4 38 "
11 18 "
11 18 "
3 18 "
12 58 "
1 58 "
12 58 "
1 58 "
The Mark V is a cast iron replacement to the conventional concrete box. The Mark V delivers a much lower Total Cost of Ownership than conventional concrete products.
A A
Ø12.4375
Ø9.6976
2.0000
0.6250
12.156411.1875
11.1250
10.0223
Matches the insideof the Mark VII box
0.5938
0.5863 4°4°
934"
3516"
438"
934"
91316"
178"
9" 1"
Special lids available upon request.
91316
178
934
438
934
3516
9 1
10"
1112
1010
1112111
2
The Mark VTB is o�ered in a variety of powder coat colors.
10"
13 1516 "
11 116 "
11.549
10.25013.750
0.625
Mark V Mark VTB Mark VII
DESCRIPTION PART NUMBER WEIGHT
Mark V 10" Paving Adapter 1" Height (aka Riser /Grade Ring)
CUL10AMV1 7 lbs
Mark V 10" Paving Adapter2" Height (aka Riser /Grade Ring)
CUL10AMV2 15 lbs
CUL10AMV3 26 lbsMark V 10" Paving Adapter3" Height (aka Riser /Grade Ring)
DESCRIPTION PART NUMBER WEIGHT
Mark V 10" Rim Heavy(Without Flange)
CUL10RHVY 34 lbs
Mark V 10" Rim Heavy(With Flange)
CUL10RHVYF 44 lbs
DESCRIPTION WEIGHT
Mark V 10" Lid StandardWater
16 lbs
Mark V 10" Lid StandardCP Test
16 lbs
Mark V 10" Lid Heavyw/ 4" Skirt Water
20 lbs
Mark V 10" Lid Heavyw/ 4" Skirt CP Test
20 lbs
Mark V 10" Lid Heavy Locking Water w/ bar & bolt
16 lbs
PART NUMBER
CUL10LHVYW
CUL10LHVYCPT
CUL10LHVY4W
CUL10LHVY4CPT
I10LBHVYWL
Please inquire for box assembly part numbers.
Please inquire for box assembly part numbers.
The Mark V Heavy Triangle Box offers the benefits and features of the standard Mark V, in a triangle configuration.
The Mark VII Heavy Traffic Box offers the same internal and overall height dimensions as the Mark V Heavy Traffic Box, with a larger 12" lid.
DESCRIPTION WEIGHT
10" Mark V Tri Lid Water 20.5 lbs
10" Mark V Tri Lid Sewer 20.5 lbs
10" Mark V Tri Lid Reclaim Water 20.5 lbs
10" Mark V Tri Lid CVWD-RW 20.5 lbs
10" Mark V Tri Lid CVWD-RW Powder Coat Purple
20.5 lbs
PART NUMBER
CUL10LTW
CUL10LTS
DESCRIPTION WEIGHT
10" Mark V Tri Lock Water, Powder Coat Blue
20.5 lbs
10" Mark V Tri Lock IRWD RW 20.5 lbs
PART NUMBER
CUL10LTLCVWDW
CUL10LTLIRWD-RW
DESCRIPTION WEIGHT
10" Heavy Mark V Tri Rim W/Flange 55.5 lbs
10" Heavy Mark V Tri Rim W/Flange IRWD
55.5 lbs
PART NUMBER
GRE10RTF
GRE10RTFIRWD
DESCRIPTION WEIGHT
12" Lid Mark VII – Long Skirt Sewer
26.0 lbs
12" Lid Mark VII – Long Skirt Water
26.0 lbs
PART NUMBER
GRE12LHVYSLS
DESCRIPTION WEIGHT
12" Heavy Mark VII Rim W/Flange Class 35
50.0 lbs
PART NUMBER
CUL12RHVYF
GRE12LHVYWLS
DESCRIPTION WEIGHT
12" Lid Mark VII – 2.5" Skirt Water - OL
16.5 lbs
12" Lid Mark VII – 2.5" Skirt Water - OR
16.5 lbs
PART NUMBER
CUL12LHVYW-OL
CUL12LHVYW-OR
12" Lid Mark VII – 2.5" Skirt 16.5 lbsGRE12LHVY4W
Please inquire for box assembly part numbers.
DESCRIPTION WEIGHT
Mark VII 12" Paving Adapter 1 10.7 lbs
Mark VII 12" Paving Adapter 2 18.7 lbs
PART NUMBER
CUL12AMV1
CUL12AMV2
Mark VII 12" Paving Adapter 3 32.0 lbsCUL12AMV3
CUL10LTRW
CUL10LTCVWD-RW
CUL10LTCVWD-RWP
10" Mark V Tri Lid CVWD-RW Sewer Force Main Unpainted
20.5 lbs
10" Mark V Tri Lid CVWD-RWSFM – Powder Coat Green
20.5 lbs
10" Mark V Tri Lid CVWD-RW Water - Unpainted
20.5 lbs
10" Mark V Tri Lid CVWD-RW Water – Powder Coat Red
20.5 lbs
CUL10LTCVWD-SFM
CUL10LTCVWD-SFM-G
CUL10LTCVWD-W
10" Mark V Tri Lid CVWD-RW Water – Powder Coat Silver
20.5 lbs
10" Mark V Tri Lid CVWD-RWWater – Powder Coat Yellow
20.5 lbs
10" Mark V Tri Lid CVWD-RWWater – Powder Coat Blue
20.5 lbs
10" Mark V Tri Lid IRWD Brine 20.5 lbs
CUL10LTCVWD-W-S
CUL10LTCVWD-W-Y
CUL10LTCVWD-W-B
CUL10LTIRWDBR
10" Mark V Tri Lid Raw Water 20.5 lbs
10" Mark V Tri Lid RW 20.5 lbs
CUL10LTIRWDRW
CUL10LTIRWDRW
CUL10LTCVWD-W-R
4 38 "
11 18 "
11 18 "
3 18 "
12 58 "
1 58 "
12 58 "
1 58 "
The Mark V is a cast iron replacement to the conventional concrete box. The Mark V delivers a much lower Total Cost of Ownership than conventional concrete products.
A A
Ø12.4375
Ø9.6976
2.0000
0.6250
12.156411.1875
11.1250
10.0223
Matches the insideof the Mark VII box
0.5938
0.5863 4°4°
934"
3516"
438"
934"
91316"
178"
9" 1"
Special lids available upon request.
91316
178
934
438
934
3516
9 1
10"
1112
1010
1112111
2
The Mark VTB is o�ered in a variety of powder coat colors.
10"
13 1516 "
11 116 "
11.549
10.25013.750
0.625
Mark V Mark VTB Mark VII
DESCRIPTION PART NUMBER WEIGHT
Mark V 10" Paving Adapter 1" Height (aka Riser /Grade Ring)
CUL10AMV1 7 lbs
Mark V 10" Paving Adapter2" Height (aka Riser /Grade Ring)
CUL10AMV2 15 lbs
CUL10AMV3 26 lbsMark V 10" Paving Adapter3" Height (aka Riser /Grade Ring)
DESCRIPTION PART NUMBER WEIGHT
Mark V 10" Rim Heavy(Without Flange)
CUL10RHVY 34 lbs
Mark V 10" Rim Heavy(With Flange)
CUL10RHVYF 44 lbs
DESCRIPTION WEIGHT
Mark V 10" Lid StandardWater
16 lbs
Mark V 10" Lid StandardCP Test
16 lbs
Mark V 10" Lid Heavyw/ 4" Skirt Water
20 lbs
Mark V 10" Lid Heavyw/ 4" Skirt CP Test
20 lbs
Mark V 10" Lid Heavy Locking Water w/ bar & bolt
16 lbs
PART NUMBER
CUL10LHVYW
CUL10LHVYCPT
CUL10LHVY4W
CUL10LHVY4CPT
I10LBHVYWL
Please inquire for box assembly part numbers.
Please inquire for box assembly part numbers.
The Mark V Heavy Triangle Box offers the benefits and features of the standard Mark V, in a triangle configuration.
The Mark VII Heavy Traffic Box offers the same internal and overall height dimensions as the Mark V Heavy Traffic Box, with a larger 12" lid.
DESCRIPTION WEIGHT
10" Mark V Tri Lid Water 20.5 lbs
10" Mark V Tri Lid Sewer 20.5 lbs
10" Mark V Tri Lid Reclaim Water 20.5 lbs
10" Mark V Tri Lid CVWD-RW 20.5 lbs
10" Mark V Tri Lid CVWD-RW Powder Coat Purple
20.5 lbs
PART NUMBER
CUL10LTW
CUL10LTS
DESCRIPTION WEIGHT
10" Mark V Tri Lock Water, Powder Coat Blue
20.5 lbs
10" Mark V Tri Lock IRWD RW 20.5 lbs
PART NUMBER
CUL10LTLCVWDW
CUL10LTLIRWD-RW
DESCRIPTION WEIGHT
10" Heavy Mark V Tri Rim W/Flange 55.5 lbs
10" Heavy Mark V Tri Rim W/Flange IRWD
55.5 lbs
PART NUMBER
GRE10RTF
GRE10RTFIRWD
DESCRIPTION WEIGHT
12" Lid Mark VII – Long Skirt Sewer
26.0 lbs
12" Lid Mark VII – Long Skirt Water
26.0 lbs
PART NUMBER
GRE12LHVYSLS
DESCRIPTION WEIGHT
12" Heavy Mark VII Rim W/Flange Class 35
50.0 lbs
PART NUMBER
CUL12RHVYF
GRE12LHVYWLS
DESCRIPTION WEIGHT
12" Lid Mark VII – 2.5" Skirt Water - OL
16.5 lbs
12" Lid Mark VII – 2.5" Skirt Water - OR
16.5 lbs
PART NUMBER
CUL12LHVYW-OL
CUL12LHVYW-OR
12" Lid Mark VII – 2.5" Skirt 16.5 lbsGRE12LHVY4W
Please inquire for box assembly part numbers.
DESCRIPTION WEIGHT
Mark VII 12" Paving Adapter 1 10.7 lbs
Mark VII 12" Paving Adapter 2 18.7 lbs
PART NUMBER
CUL12AMV1
CUL12AMV2
Mark VII 12" Paving Adapter 3 32.0 lbsCUL12AMV3
CUL10LTRW
CUL10LTCVWD-RW
CUL10LTCVWD-RWP
10" Mark V Tri Lid CVWD-RW Sewer Force Main Unpainted
20.5 lbs
10" Mark V Tri Lid CVWD-RWSFM – Powder Coat Green
20.5 lbs
10" Mark V Tri Lid CVWD-RW Water - Unpainted
20.5 lbs
10" Mark V Tri Lid CVWD-RW Water – Powder Coat Red
20.5 lbs
CUL10LTCVWD-SFM
CUL10LTCVWD-SFM-G
CUL10LTCVWD-W
10" Mark V Tri Lid CVWD-RW Water – Powder Coat Silver
20.5 lbs
10" Mark V Tri Lid CVWD-RWWater – Powder Coat Yellow
20.5 lbs
10" Mark V Tri Lid CVWD-RWWater – Powder Coat Blue
20.5 lbs
10" Mark V Tri Lid IRWD Brine 20.5 lbs
CUL10LTCVWD-W-S
CUL10LTCVWD-W-Y
CUL10LTCVWD-W-B
CUL10LTIRWDBR
10" Mark V Tri Lid Raw Water 20.5 lbs
10" Mark V Tri Lid RW 20.5 lbs
CUL10LTIRWDRW
CUL10LTIRWDRW
CUL10LTCVWD-W-R
4 38 "
11 18 "
11 18 "
3 18 "
12 58 "
1 58 "
12 58 "
1 58 "
The Mark V is a cast iron replacement to the conventional concrete box. The Mark V delivers a much lower Total Cost of Ownership than conventional concrete products.
A A
Ø12.4375
Ø9.6976
2.0000
0.6250
12.156411.1875
11.1250
10.0223
Matches the insideof the Mark VII box
0.5938
0.5863 4°4°
934"
3516"
438"
934"
91316"
178"
9" 1"
Special lids available upon request.
91316
178
934
438
934
3516
9 1
10"
1112
1010
1112111
2
The Mark VTB is o�ered in a variety of powder coat colors.
10"
13 1516 "
11 116 "
11.549
10.25013.750
0.625
Make Your Entire Valve Box IRON– Not Just The Frame And Cover! Valve Box Stabilizer
Available in these colors
Concrete boxes have an iron ring and cover for durability.Bingham & Taylor All-Iron valve boxes take durability one step higher,with construction that is 100% cast iron, for easiest install and longest service life.
• Designed to �t with all round valve box bells and bases, both cast iron and plastic valve boxes.
• Prevents intrusion of dirt, back�ll, or sand from underneath.• Stabilizes plastic and cast iron valve boxes.• All down force transferred to ground surface, not the buried valve or pipe.• The patented design assures proper alignment and protection of the
valve operating nut.• Settling and shifting valve box issues are eliminated.
When ordering, please follow chart to specify valve type and base size.
SPECIFICATIONS
Valve Type
Poly Valve
Poly Valve
Steel Valve
Steel Valve
Base Size
#6 Base
Standard 8” Bottom
#6 Base
Standard 8” Bottom
Part Number
ADP4001006P
ADP4001002P
ADP5001006S
ADP5001002S
For Poly or Steel Gas and Water Valves
The Mark V Series is designed for every industry incorporating underground valves.
It is the stand-alone replacement for concrete access boxes, also larger diameter valve boxes (8" PVC) for deeper bury and minimum 8" clear opening to valve.
Engineered speci�cally for heavy tra�c applications, it will not degrade like concrete, so Total Cost of Ownership is less.
KEY FEATURES INCLUDE: BENEFITS INCLUDE:
• Cast iron is less likely to be damaged during installation and while in use.
• Installation is more e�cient and less costly.
• Adaptable / e�cient installations.
• Lighter weight satis�es employee weight lift restrictions, minimizes strains and injuries.
• Better for employees and installers; fewer workman’s comp issues.
• Lids and boxes are durable and secure while providing easy access.
• Lid stays secure without set screws.
• Multiple industry use. Quick turnaround on custom lids, thanks to in-house pattern shop and foundry.
• Meets H-20/HS-20 heavy duty tra�c load and airport / runway load requirements.
• Meets the requirements of ASTM A 48 Class 35B
• Reduced inventory.
• Cast Iron replaces less durable concrete.• Heavy tra�c design 4" deep skirt.
• Easy installation, no concrete apron required.
• Paving adapters / risers available: 1", 2", 3".
• Major weight advantage: Mark V weighs34 lbs; concrete weighs 70% more: 58 lbs
• Lids available: Standard Lid w/ 2" skirt (16 lbs) Heavy Duty Lid w/ 4" skirt (20 lbs) Locking Lid (16 lbs)
• Custom lids for all your needs: WATER, SEWER, TEST, CP TEST, ANODE, GAS, etc.
• Performance rating: meets AASHTO M306 andFAA AC 150/5320-6E load requirements.
• Universal design: round shaped Triangle Logo“RECLAIM” lid available.
Cost
($)
Years0 20
• Bingham & Taylor• Other brands
Cost of Ownership over time
Heavy Traffic Valve BoxesMark Series
Manufactured in the USASince 1849
“Lighter weight, longer life, lower TCO!”
Dennis Quinn: Director of Sales – Mid-Atlantic and Canada, Office #540-825-8334 ext. 116Cell #540-219-4596 - [email protected]
Matt Haan: Director of Sales – Southeast, Cell #[email protected]
Perry Hyde: Director of Sales – Midwest,Office #540-825-8334 ext. 117 - Cell #540-229-1882 [email protected]
Brad Washburn: Sales Manager – New England, Office #540-825-8334 ext. 137 - Cell #540-229-6008 [email protected]
Brandon Wheeler: Director of Sales – Central, Cell # 918-319-7900 [email protected]
Bingham & Taylor • Tel (540) 825.8334 • Fax (540) 825.2173 • www.binghamandtaylor.com
Mark deLancellotti: Director of Sales – West, Office #540-825-8334 ext. 138Cell #540-229-2599 [email protected]