Northwest EMC | SAR & CTI Brochure

Embed Size (px)

Citation preview

  • 7/28/2019 Northwest EMC | SAR & CTI Brochure

    1/2

    The Leader in Compliance TestingComprehensive, state-of-the-art testing services.

    Locations

    California Minnesota Oregon Washington

    ContactTechnical excellence is our standard.

    Unsurpassed customer service is our priority.

    For more information, contact us!

    Toll-Free: (888) 364-2378

    Worldwide Accreditations

    www.NWEMC.com

  • 7/28/2019 Northwest EMC | SAR & CTI Brochure

    2/2

    Northwest EMC is your certication solution for yourwireless devices. Weve been designated by the FCC as aTelecommunications Certication Body (TCB), recognized by

    Industry Canada as a Certication Body (CB), and validated bythe European Commission as a Conformity Assessment Body

    (CAB).

    SAR

    RF safety is a regulatory requirement for many wireless devices.Weve expanded our testing services to include SAR (SpecicAbsorption Rate) evaluations.

    Our SAR Testing lab is located in a semi-anechoic chamber tomaintain strict temperature control and eliminate inuences fromother nearby transmitters. Weve selected the premier supplierof SAR evaluation systems and government-preferred vendor,SPEAG of Zurich Switzerland, to provide their latest offering theDASY5. Equipped with probes, tissue simulants, and phantoms,the DASY5 can evaluate wireless devices operating from 400MHz 6 GHz.

    In addition, we use Agilent 8960 test set to support all cellularoperating modes up through EVDO and HSPA Rel. 6. Our SARtesting is NVLAP accredited to ISO 17025 requirements.

    Specic Tests Offered: OET Bulletin 65, Edition 97-01(Aug 1997); Supplement C, Edition 01-01 to OET Bulletin65, Edition 97-01; IEEE Standard 1528 (2003) includingAmndmt 1; EN 62369-1:2009; EN 50360 (2001); EN62209-1 (2006); IEC 62209-01 (Feb 2005); IEC 62209-02

    (2010); ANSI C95.1:2005+ A1:2010, EN 50364 (2001); EN50371 (2002)

    WIRELESS TESTINGand SAR EVALUATIONS

    Notable Equipment: SPEAG DASY5 SAR test system,Agilent 8960 call box, and Agilent PNA network analyzer(20 GHz) with dielectric probe.

    Devices that require SAR: System integrators andmedical device manufacturers with radios that areoperated closer than 20cm to the head or torso. Thisincludes devices that are small enough for a coat pocket,belt clip, or used on the lap like a notebook computer.

    The SAR chamber is 12 ft wide by 16 ft long x 8 ft high. Adedicated HVAC unit provides +/- 1 degree C temperaturecontrol.

    The SAR measurement system is located in a semi-anechoicchamber. This provides an ambient free environment that alsoeliminates reections.

    Northwest EMC will bridge the gap

    between your products and the world.