North American Product Catalogue

1875 Thomas R. Ellin, one of Sheffield’s foremost industrialists of the time,moved away from his family’s cutlery business to set up an engineering companyto manufacture a hand tool which he had adapted from a simple implementmade by a Sheffield hand grinder. This tool was to become the world famousFootprint Wrench.

From this small beginning, Footprint Tools Limited, as we are now known,has grown into one of the largest privately owned hand tool manufacturingcompanies in the United Kingdom. We value highly our independence and prideourselves on our ability to offer a personal service to our many customers.

Having obtained ISO 9002, Footprint manufactures a wide range of hand toolswhich adhere to exacting and rigorous standards. These tools are renownedworld wide for their high quality and competitive pricing. With this reputation,Footprint serves the United Kingdom and some 80 countries throughout theworld with value for money on hand tools which are used in both professionaland DIY applications.

One final point of interest - we are often asked where the “Footprint”, or morecorrectly the outline of a Foot - originated from. We think that when ThomasEllin was starting his new company and thus looking for a suitable trademark, he must have been reading Daniel Defoe’s “Robinson Crusoe”. Inthe company’s archives, we have an illustrated edition of this book from the lastcentury, which on one page depicts Crusoe finding Friday’s footprint in the sand.One of these - the left foot in outline, is circled and in the margin are writtenthe words - “possible trademark”.

Crusoe sees a footprint in the sand.

6

8

10

12

14

16

18

20

PAGE

5. Machine ground on all faces and bevel edges.

6. Hardened and tempered to ensure maxi-mum performance and a lasting cutting edge.

7. Bolster and tang construction which pre-vents handle slipping whilst providing maxi-mum strength and support.

Wood Chisels & Wood CarvingBevel Edge, Cellulose Acetate Handles

85 UPC 748147A bevel edged wood chisel with a shatter proof celluloseacetate handle, this chisel can be used with either a malletor a steel hammer. The most popular all round chisel, with the ability to perform dovetailing and cut into tight corners.

Bevel Edge, Cellulose Acetate Handles

385 UPC 748147 1231063pc. Set -1/2", 3/4", 1"

SIZE UPC1/4" 1270293/8" 1270361/2" 1270435/8" 1270503/4" 1270677/8" 1270741" 127081

1 - 1/4" 1270981 - 1/2" 127104

SIZE UPC1/4" 1209381/2" 1209523/4" 1209761" 120990

1 - 1/4" 1210031 - 1/2" 121019

Bevel Edge, Polypropylene Handles

87 UPC 748147A bevel edged chisel designed to satisfy the needs of DIYand professional users whilst commanding an economicprice. The polypropylene handle provides control andcomfort and though primarily designed for use with a mal-let will accept occasional use with a hammer.

SIZE UPC1/4" 1205321/2" 1205563/4" 1205701" 120587

1 - 1/4" 1206001 - 1/2" 120617

Bevel Edge, Butt Chisels

88 UPC 748147Heavy duty short blade series with a steel striking cap. High quality forged steel blades.

Bevel Edge, Dual Composite Handles

89 UPC 748147A bevel edged chisel designed to satisfy the needs of DIYand professional users whilst commanding an economicprice. The dual composite polypropylene handle providescontrol and comfort.

Bevel Edge, Butt Chisels

388 UPC 748147 1232123pc. Set -1/2", 3/4", 1"

Bevel Edge, Polypropylene Handles

387 UPC 748147 1271353pc. Set - 1/2", 3/4", 1"

Bevel Edge, Dual Composite Handles

389 UPC 748147 2803113pc. Set -1/2", 3/4", 1"

Bevel Edge, Dual Composite Handles

489 UPC 748147 1500274pc. Set -1/4",1/2", 3/4", 1"

Gift Set - Plastic Case Combo

389HGS 3 chisels, honing guide and sharpening stone.

Gift Set - Wooden Box Combo

389MPS 3 chisels, honing guide and sharpening stone.

Bevel Edge, Polypropylene Handles

487 UPC 748147 1271424pc. Set -1/4", 1/2", 3/4", 1" Bevel Edge, Cellulose Acetate Handles

485 UPC 748147 1231134pc. Set -1/4", 1/2", 3/4", 1"

Bevel Edge, Cellulose Acetate Handles

685 UPC 748147 1231206pc. Set -1/4", 1/2", 5/8", 3/4", 7/8", 1"

Bevel Edge, Beechwood Handles

465 UPC 748147 123104The 465 set offers a selection of four wood chisels with sea-soned beechwood handles designed for use with a mallet. 4pc. Set -1/4",1/2", 3/4", 1"

Carving Tools - Miniature

30 UPC 748147 1011046pc. Set

A 5/16" 8mm Straight

B 3/8" 10mm Bent

C 3/8" 10mm Skew Bevel

D 3/8" 10mm Gouge

E 3/32" 2mm U tool

F 3/32" 2mm V veining

1. Finish honed to 30 degrees.

2. Blade forged from high quality carbon steel.

3. Different handle styles and materials tosatisfy customer choice.

4. Chisel guard providing protection for thecutting edge and safety for the user.

SIZE UPC1/4" 1202353/8" 1202591/2" 1202665/8" 1202733/4" 1202807/8" 1202971" 120303

1 - 1/4" 1203101 - 1/2” 1203271 - 3/4" 120334

2" 120341

KEY FEATURES OF A FOOTPRINT WOOD CHISEL

3

2

1

7

5

6

All Footprint Wood Chisels aremanufactured to BS 1943.

4

6

Planes

KEY FEATURES OF A FOOTPRINT 4B PLANE

All Footprint Planes are manufactured to BS 3623*1.

1

3

2

3

7

5

4

6

1. A hardened and tempered blade withmachine ground faces, sides, and cuttingedge. Honed ready for use.

2. Grey cast iron body. Machine ground basefor smooth planing.

3. Stained beechwood handles for positive,comfortable control.

4. A frog adjusting screw for fine adjustmentof the frog assembly.

5. An attractive chrome plated lever cap,providing strong blade retention.

6. Accurately machined frog for preciseadjustment and stability during use.

7. A large brass adjusting nut for simple andrapid adjustment.

Adjustable Block Plane 1 5/8 x 7

220B UPC 748147 280021The cutter is fully adjustable. For thickness of shaving,rotate knurled nut For evenness of shaving, moveadjustable lever. The cutter rests on its seat at an angle of 21 degrees.

Low Angle Block Plane 1 5/8 x 7

601/2The cutter rests at an angle of 12 degrees. This anglemakes it easy to plane end grain. The mouth is adjustablefor coarse or fine work. Finger grips in sides. Cutter adjustedendwise with knurled screw.

Block Plane - Adjustable Wheel 1 5/8 x 7

247H UPC 748147 950085The cutter is fully adjustable. For thickness of shaving,rotate knurled nut For evenness of shaving, moveadjustable lever. The cutter rests on its seat at an angle of 21 degrees.

Smooth Plane 2 x 9 3/4

4B UPC 748147 280205The most popular bench plane. As with all footprint planes,the casting is machined and the base machine ground *1 toprovide complete accuracy. The frog contact points arealso machined and the mouth is broached so that it issquare to the sides. The handles are made from the traditional beechwood.

Jack Plane 2 x 14

5B UPC 748147 280106The footprint jack plane is for heavy material removal andsquaring of rough timber prior to final finishing. The extralength ensures the plane does not follow contour andinstead levels the wood being planed.

Adjustable Block Plane 1 5/8 x 7

220H UPC 748147 950078The cutter is adjustable endwise by means of a steel adjust-ing screw and rests at an angle of 21 degrees. Bottom andsides are milled and ground. Plastic knob.

Trimming Plane 1 x 3 1/2

200T UPC 748147 280113Small, light plane, handy for modeling, sculpture, odds andends of light work. Sides and trimmings are durable nickelfinish. Individually carded.

Smooth Plane Homemaster 2 x 9 3/4

4H UPC 748147 280809As with all footprint planes, the body has a machined base,for smooth planing. The polypropylene handles are hardwearing, impact resistant and designed to provide fatigue-free use.

Smooth Plane 1 5/8 x 7

4ER UPC 748147 280717Same as 4H smooth plane but with dual composite handle& knob for added comfort and grip.

Plane Blade

922 UPC 748147 280052Cutter for 60 1/2, 220B, 220H and 247H.

Plane Blade

544 UPC 748147 280410Single cutter for #4 and #5.

8

Woodworking ToolsGauges, Marking

1258 UPC 748147 160019For marking of wood prior to sawing, chiseling or cutting. Itis manufactured from selected beechwood and has aradius bottom edge to slide easily on the wood beingmarked. A thumbscrew adjusts the stem which is markedfrom 0-150mm in 1mm graduations.

Tacklifter2651 UPC 748147 390010

The handle is made from beechwood and has a brass ferrule. A useful tool for lifting all types of carpet and upholstery tacks.

Size: 4-1/2"(115mm)

Sharpening Stone - Silicon Carbide109 UPC 748147 101098

Sharpening stone with 6" x 2" x 1" with coarse and fine grit.

Gauges, Combined Mortice and Marking - Beechwood1876 UPC 748147 160101

A combination beechwood mortice and marking gauge with a single pin on one side and a double pin for markingout mortices on the other. Thumbscrew adjusts the stemand solid brass slide.

Gauges, Combined Mortice and Marking - Rosewood1877 UPC 748147 160200

A rosewood gauge manufactured to the same exactingstandards as the pattern 1876 but also including a brassplated head and brass adjustment screw.

Carpenters’ Rosewood Square1248 UPC 748147

The rosewood stock is fixed to the steel blade by threebrass rivets and the stock is fitted with a thick brass plate forprotection and a longer life. Used for marking out rightangles and checking for squareness.

Carpenters’ Beechwood Square1249 UPC 748147

The beechwood stock is fixed to the steel blade by threebrass rivets and the stock is fitted with a thick brass plate forprotection and a longer life. Used for marking out rightangles and checking for squareness.

Carpenter’s Sliding Bevel1253 UPC 748147

The stock is made from rosewood and the ends are pro-tected by riveted brass fittings. Used for checking edges,marking joints or marking across boards.

Carpenter’s Sliding Bevel-Beechwood1254 UPC 748147

A lower cost version of 1253 manufactured with a beech-wood stock instead of rosewood.

Carpenter’s Mallet130 UPC 748147 240049

Manufactured from specially selected beechwood andsuitable to use with Footprint wood chisels for general joinery work.

Size: 4-1/2"(115mm)

Hand Drill 160

A hand drill with single pinion wheels for strength and alarge main gear for firm action with comfortable beech-wood handles. It has a Jacobs hand tightening chuck with a5/16" capacity.

Hand Drill 165

Lighter version with the same chuck but with only one pinion wheel.

Silicon Carbide Pocket Stone149L

Sharpening stone 3" x 1" x 1/4"

Sharpening Stone - Aluminum Oxide 105 UPC 748147 201057

Sharpening stone with 6" x 2" x 1" with coarse and fine grit.

Turning Tools Set - 5pcs.HCT166R UPC 748147 116115A five piece turning tool set, consists of 3/4" gouge, 1/4"Spindle Gouge, 1/2" Skew Chisel, 1/2" Round NoseScraper, 1/4" Parting Tool. Rosewood handles, high qualitySheffield H.S.S. blades.

Combination Square285ME

12" Combination Square with Centre Head & Protector Die Stock.

Garnish Awl358 UPC 748147 071100

General purpose awl with comfortably shaped beechwoodhandle for punching holes in leather and other materials.

Honing Guide90051 UPC 748147 990500

Easy to use guide with stepped jaws to clamp wood chiselblades to and plane blades for sharpening and honing.

SIZE UPC6" TBA

7 -1/2" 3800739" 380097

10 -1/2" TBA

SIZE UPC6" TBA

7-1/2" 3805169" 380523

SIZE UPC7 -1/2" TBA

9" 04002110 -1/2" TBA

SIZE UPC7 -1/2" TBA

9" 04051910 -1/2" TBA

10

Masonry & Brick ChiselsBrick & Stone Chisel w/grip

1235 UPC 748147 116009This product has an extra thick blade creating a chiselwith superior strength. It is manufactured as a one piecedrop forging with domed anti-mushroom head to preventspreading of the striking head. It is used for smoothing theripped surface left by scutching and is sometimes known asan “edging-in” chisel. Size: 2-1/2"

Grooved Chisel w/grip

1861 UPC 748147 112612Ideal for removing the mortar and cement between brickand block work. The cutting edge is wider than the blade togive clearance and the groove enables a fast discharge ofdebris. Forged as a one piece drop forging with a domedanti-mushroom head.

Pointed Chisel w/grip

582PWG UPC 748147 113015A carbon steel chisel with forged and ground point forbreaking up concrete and paving slabs.

Flat Masonry Chisels

590 UPC 748147A carbon steel range of cold chisels for shaping, cutting andchipping of stone, brick and other similar materials. Thepopular sizes are one piece drop forgings with domed anti-mushroom head to prevent spreading of the striking head.

Brick Bolster, Domed Head

1236 UPC 748147A top quality carbon steel brick bolster manufactured as aone piece drop forging and incorporating a domed anti -mushroom head to prevent spreading of the striking head.

Masons Chisel

1233C Size: 2-1/2"

SIZE UPC6" x 1/2" 111226

7" x 5/8" 111301

8" x 3/4" 111424

9" x 7/8" 111516

10" x 3/4" 111615

10" x 1" 111639

12" x 1" 111745

16" x 1" 111752

Masonry Chisels w/grip

591 UPC 748147Same as No. 590 cold chisels but with hard wearing highimpact plastic protective hand guard.

SIZE UPC8" x 3/4" 112285

9" x 7/8" 112322

10" x 3/4" 112292

10" x 1" 112339

Scutch Chisel

578 A carbon steel range of scutch chisels for holding scutchcombs (serrated edge) and droves (solid edge). Used fordressing stone and similar materials. The combs anddroves are interchangeable and double sided.Size: 1", 1-1/2"

Drove Bits

5781 Used for drilling stone and similar materials.

SIZE QTY.1" 10

1 - 1/2" 10

Scutch Bits

5782 Used for drilling stone and similar materials.

SIZE QTY.1" 10

1 - 1/2" 10

Brick Bolster w/grip

1237 UPC 748147Same as No.1236 brick bolster but with hard wearing highimpact plastic protective hand guard.

Flooring Chisel

2700 UPC 748147 112506A traditional tool for lifting floor boards, chasing plastic etc.It is manufactured as a one drop forging with hardened andtempered blade and domed anti-mushroom head to pre-vent spreading of the striking head. It is not suitable for useon concrete or stone. Size: 2 - 1/4"

Flooring Chisel w/grip

2701 UPC 748147 112513Same as No. 2700 but with hard wearing high impact plastic hand guard.

KEY FEATURES OFA FOOTPRINT

BRICK BOLSTER

All Footprint Brick Bolsters aremanufactured to BS 3066.

1. Superior thickness where the blade meets the handle.

2. Ground cutting edge.

3. Uniform blade structure from a one piece forging.

4. Quality high carbon steel.

5. Domed anti-mushroom head toprevent spreading of the strikinghead. This results in added safetyand a longer tool life.

6. Hard wearing, high impact plastic grip.

3

1

6

4

2

5

12

SIZE UPC3" 110014

4" 110021

4 - 1/2" 110038

SIZE UPC3" 110113

4" 110120

4 - 1/2" 110137

Cold Chisels & Punches

Centre Punch

650 UPC 748147A punch that is intended for marking out hole centre formany jobs including thread locking.

Solid Punch

640 UPC 748147A square section alloy steel punch which is more robustthan the parallel pin punch and is used as a “starter punch”before removing pins with a pin punch.

SIZE UPC5" x 1/16" 950368

5" x 3/32" 950351

6" x 7/32" 090149

6" x 1/8" 292017

6" x 3/16" 292024

7" x 5/16" 090163

Long Taper Punch

670 UPC 748147A punch with a longer reach which is used for lining upholes prior to pinning or riveting.

SIZE UPC

8" x 5/32" 292116

9" x 3/16" 292123

10-1/2" x 1/4" 292130

Parallel Pin Punch

74 UPC 748147Manufactured from alloy steel and used to drive out a pinfrom an assembly and is therefore in general use through-out the engineering and automotive industries.

SIZE UPC5-1/4" x 3/32" 291607

5-1/4" x 1/8" 291614

5-1/4" x 5/32" 291621

5-1/2" x 7/32" 950375

5-1/2" x 3/16" 291638

5-3/4" x 1/4" 291645

6" x 5/16" 291652

Cold Chisels - Industrial Quality

6000 UPC 748147Range of chisels with exceptional quality for engineeringuses, which is hardened, tempered and accurately groundfor excellent performance and durability.

SIZE UPC5" x 1/4" 950450

5-1/2" x 3/8" 950443

6" x 1/2" 110519

7" x 5/8" 110526

8" x 3/4" 110540

8" x 1" 110595

9" x 7/8" 110571

10" x 1" 110601

Nail Set

1982 UPC 748147Square headed knurled shank nail punches, tapered withcupped points. Designed to drive nail heads and panel pinsbelow the surface of the wood. Manufactured with asquare head to prevent rolling.

SIZE UPC1/16" 291406

3/32" 291416

1/8" 291423

5/32" 291430

3/16" 291447

612 Series Cross Cut Chisels

612Forged from square section alloy steel these chisels are formaking heavy cuts in restricted working areas.

6" x 3/8" x 1/8" cut

6-1/2" x 1/2" x 1/4" cut

7" x 5/8" x 3/8" cut

621 Series Diamond Pointed Chisels

621Square section alloy steel with diamond points for cutting “V” notches in steel.

6" x 3/8" x 1/8" cut

6-1/2" x 1/2" x 1/4" cut

7" x 5/8" x 3/8" cut

610 Round Nose Chisels

610Made from square section alloy steel, these chisels havehalf round cutting edges for grooving in steel.

6 - 1/2" x 1/2" x 1/4" cut

7" x 5/8" x 3/8" cut

Hollow Punch Set - 6pc.

180 UPC 748147 2913006 pc. set - 3/16", 1/4", 5/16", 3/8", 7/16", 1/2".

Cold Chisel with guard

G600-12 UPC 748147 950504Size:12" x 3/4".

Cold Chisel & Punch Set - 5pc.

6105 UPC 748147 110977

Hollow Punch - Imperial Bulk Pack

1804 UPC 748147Manufactured with a ground tapered section and milledclearway for removing waste materials. It is intended forcutting holes in soft materials such as leather.

ITEM NO. SIZE UPCNo.4 1/8" 291041

No.5 5/32" 291058

No.6 3/16" 291065

No.7 7/32" 291072

No.8 1/4" 291089

No.10 5/16" 291102

No.12 3/8" 291126

No.13 7/16" 291133

No.14 1/2" 291140

No.15 9/16" 291157

No.16 5/8" 291164

No.18 3/4" 291188

No.20 7/8" 291201

No.22 1" 291225

Arch Punch - Metric

1082 UPC 748147Manufactured with a ground tapered section and milledclearway for removing waste materials. It is intended forcutting holes in soft materials such as leather.

UPC6mm 1/4" 293069

8mm 5/16" 293083

10mm 3/8" 293106

11mm 7/16" 293113

12mm 1/2" 293120

14mm 9/16" 293144

16mm 5/8" 293168

17mm 11/16" 293175

19mm 3/4" 293199

21mm 13/16" 293212

22mm 7/8" 293229

24mm 15/16" 293243

25mm 1" 293250

28mm 1-1/8" 293281

32mm 1-1/4" 293328

35mm 1-3/8" 293359

38mm 1-1/2" 293380

44mm 1-3/4" 293441

50mm 2" 293502

SIZE UPC6" x 1/8" 290228

5" x 3/8" 290112

6" x 1/2" 290129

14

SIZE

Hammers & Wrecking Bars

COBRA BAR “STRIKE WITH CONFIDENCE”

Ball Pein Engineers - Hickory Handle

110 An engineers hammer manufactured from high grade steeldrop forged and hardened and tempered for consistentaccuracy of striking face hardness. Fitted with a hickoryhandle that is designed for comfort balance in use.

1/4 lb1/2 lb3/4 lb1 lb

1-1/2 lb2 lb

2-1/2 lb

4 oz8 oz10 oz12 oz16 oz

Wrecking Bar

1400 UPC 748147Made from octagonal section steel, this tool is designed forleveling structures and removing nails.

SIZE UPC1/2" x 12" 9500305/8" x 18" 9500473/4" x 24" 9500093/4" x 30" 9500163/4" x 36" 950054

Cross Pein,Joiner’s or Warrington - Hickory Handle

112 A range of joiner’s hammers with polished striking surfacesand peins. Fitted with hickory handles.

Cross Pein, Pin, Hickory Handle

114 A smaller version of the joiner’s hammer - sometimescalled a telephonists hammer. It is ideal for panel pins andother delicate work.

3-1/2 oz 100gms

Flat Pry Bar

5441 UPC 748147 950023A multipurpose flat pry bar.

Brick Hammer

BR24Size: 24 oz.

Cobra Bar

571 UPC 748147H.D. Contractor Cobra Bar, made in Sheffield, England.

Club Hammer - Hickory Handle

H1116 A hammer which is intended for heavy duty purposes suchas masonry work with cold chisels and brick bolsters.Fitted with quality hickory handles.

2-1/2 lb 110 gms4 lb 225 gms

Mini Bar

DUB005Size: 5-1/2”

SIZE UPC12" x 5/8" 95061618" x 5/8" 95062724" x 5/8" 95063430" x 5/8" 95064136" x 5/8" 950658

Introducing the “NEW” heavyduty Cobra Wrecking Bars from

Footprint Tools Limited

A range of high quality Sheffieldmanufactured Heavy Duty

Wrecking Bars designed to meetthe needs of the Professional

Tradesman.

Manufactured from heavy gaugequality steel incorporating someunique design features not found

on standard Wrecking Bars.

Designed to give the user upto 90 degree lifting capacity,low profile for increasedleverage and extra flaredclaw/chisel for increasedpower.

Available in 5 sizes 12" - 36" and finishedin a hardwearing stove enamel finish with

a wraparound information label.

16

Handsaws, Knives & ScrapersHandsaws

254 A quality blade made from alloy spring steel, taper groundwith hardened and sharpened teeth. Top quality beech-wood handles. Size: 22"(550mm),

24"(600mm)

Tenon Saws

256 Saws of superior quality with heavy solid brass backs,hand sharpened set teeth and traditional beechwood handles. These saws have strong and straight parallelblades for cutting tenons and smaller sections of timber tolength. Sizes: 10"(250mm),

12"(300mm), 14"(350mm)

Dovetail Saws

246 The dovetail saw is typically used for the lighter duty appli-cations. It is particularly useful for cutting dovetail jointsand for cutting thinner sections of timber. Handles aremade from beechwood.Size: 8"(200mm)

Gents Saw

245 A straight beech handled saw with brass back and topquality Sheffield steel blade. Ideal for fine joints. Size: 6"(150mm),

7"(175mm), 8"(200mm)

Flushcut Saw

244 This saw has a flexible blade that cuts on the pull stroke.It is ideal for controlled flushcutting.Size: 6"(150mm)

Reversible Gents Saw

247 A brass backed high quality alloy steel offset blade allowingfor either the left or right handed workman. The crankedhandle allows for an easier cut into difficult corners.Size: 10"(250mm)

Veneer Saw

243 A curved blade saw designed for precision veneer work.Size: 3"(75mm)

Hack, Junior

20 UPC 748147 300200An essential saw for light duty cutting of metals. Finished inblack metal stove enamel. This item is essential for anytool kit.Size: 6"(150mm)

Blades, Hack, Junior

22 Spare blades in packs of 10, suitable for the No. 20 JuniorHacksaw.Size: 6"(150mm)

Pad, with 10" Blade

658 A beechwood handled padsaw with solid brass ferrule.Used for cutting holes in shapes in wood and other materi-als. The footprint padsaw is designed to allow adjustmentof the blade to suit any job.Size: 10"(250mm)

Linoleum Saw

2220 A quality knife with a hooked blade for cutting lino andother similar materials. It has a beechwood handle withthree rivets holding it to the blade. Size: 3"(75mm)

Marking Knife

949 A carpenters marking out knife with hardwood handle.This is attached to the blade by three strong rivets.Size: 9"(225mm)

Various shapes of Sheffield steel blades. For scraping paintor varnish.

Shoe, Beechwood Handle

2022 A shoe knife with a clipt 4" blade and a beechwood handle. Anall purpose knife for around the house, garden, warehouse,factory or office.Size: 4"(100mm)

Rectangular Blade Scraper Set

241 Sheffield steel blades ideal for scraping paint or varnish.

Shaped Scraper Set

242

Shoe, Rosewood Handle

369 UPC 748147 210851A clipt point shoe knife with a 4-1⁄2" long blade and rosewoodhandle with two brass rivets. A general purpose leather knife,but with many other uses. Made from high carbon temperedspring steel which retains a durable cutting edge. Size: 4-1⁄2"(115mm)

Hacking Knife

182 UPC 748147 210103Primarily intended for use with a hammer to chip old putty outof window frames. It can however be used for many otherpurposes as it has a strong carbon steel blade which tapersfrom 5/16" at the back to 7/32" (8mm-5.5mm) at the cannel.The two leather scales are fixed to the tang by 3 rivets.Size: 4-1/2"(115mm)

18

Tin Snips & Wrenches

KEY FEATURES OF A FOOTPRINT WRENCH

All Footprint Wrenches aremanufactured to BS 3594.3

1. Carefully profiled teeth machined from high carbon steel.

2. The hook is a one piece forging.

3. Moveable bolt to adjust gripping capabilities.

4. Both hook and frame manufactured fromhigh quality carbon steel.

5. Pressed steel handle strengthened by asteel wedge insert with hardened teeth.

6. Screwdriver type end for general applications.

Straight Cutting

222 A general purpose tin snip for straight cutting of sheetmetal.

Straight Cutting, Spring & Clip

223 The same as number 222, but with a spring to facilitaterepetitive cutting and a wire safety clip to keep the snipsclosed when not in use.

Curved Blade

225 Similar in design to number 222 but with a curved blade forcircular cutting.

Cranked with Spring

228 A general purpose tinsnip designed to cut patterns in sheetmetal, leather or other similar materials. The crankedhandle allows straight and circular cutting and it is fittedwith a spring for repetitive cutting and wire safety clip tokeep snips closed when not in use.

Heavy Duty, Cranked Right Hand

37 For Straight and circular cutting in heavier gauge sheet metal.

Heavy Duty, Cranked Left Hand

35 Similar to number 37, but intended for left hand operation.

Heavy Duty, Straight

38 A heavy duty tinsnip with a straight shank, suitable for the cut-ting of light and heavier gauge sheet metals.

Jewelers Straight Blade

1654 A tinsnip with straight blade intended for light duty work andtherefore ideal for the professional silversmith, jeweler andhome hobbyist.

Jewelers Straight Blade with Spring & Clip

1656 Similar to number 1654 but with a spring and wire retention clip.

Pipe Wrench

698 The original pattern wrench with a screwdriver type end andmoveable bolt to adjust gripping capabilities.

Pipe Wrench,Thumbnail Pattern

900 Similar to 698 but with a thumbturn knurled nut, which provides easy adjustment with one hand. The hook on this type is availableonly with with a round end.

20

1

2

5

4

6

Terms & Conditions

dance with theseConditions the Seller shall be entitled to replace the Goods (or the part in question) or rectify anydefect free of charge or at the Seller’s sole discretion refund to the Buyer the price of the Goods(or proportionate part of the price) 6.5 The above warranty does not extend to parts materials or equipment not manufactured by theSeller in respect of which the Buyer shall only be entitled to a claim in respect of any negligence onthe part of the Seller The Seller shall not be liable to the Buyer by reason of any representationorant implied warranty conditions or other form or any duty at common law or under the expressterms of the Contract for any consequential loss or damage (whether for loss of profit or otherwise)costs expenses or other claims for consequential compensation whatsoever (and whether causedby the negligence of the Sellers its employees or agents or otherwise) which arise out of or in con-nection with the supply of the Goods or their use by the Buyer except as expressly provided bythese Conditions.7. TERMS OF PAYMENT7.1 Unless otherwise expressly agreed in writing payment for the goods shall be monthly account,i.e. not later than at the end of the month following the date of the invoice.7.2 Time of payment shall be of the essence of the contract.7.3 If payment is overdue the Buyer may at the Seller’s option be liable to pay the Seller intereston any overdue balance up to the rate of 4% above the Bank of England base rate for the timebeing.7.4 If under the contract deliveries are required in installments over anextended period each consignment may be invoiced separately.7.5 All payments shall be made in full without deduction in respect of anysetoff or counterclaim.7.6 Payments shall not be withheld on account of minor omissions or defects which do not affectthe commercial use of the goods.7.7 Any concession, latitude or waiver the Seller may allow or has allowed the Buyer at any timeshall not prevent the Seller’s subsequent exercise of its full rights under these conditions.8. RISK AND PROPERTY8.1 Risk shall pass in the case of goods to be delivered at the Seller’s premises at the time whenthe Seller notifies the Buyer that the goods are available for collection or in the case of goods to bedelivered otherwise than the Seller’s premises at the time of delivery or if the Buyer wrongfully failsto take delivery of the goods at the time when the Seller has tendered delivery of the goods.8.2 Not withstanding delivery and the passing of risk in the goods or any of the provision of theseconditions the property in the goods shall not pass to the Buyer until the Seller has received in cashor cleared funds in full payment of the price of the goods and all other goods agreed to be sold bythe Seller to the Buyer for which payment is then due.8.3 Until such time as the property in the goods passes to the Buyer the Buyer shall hold the goodsas the Seller’s fiduciary agents and bailee and shall keep the goods separate from those of theBuyer and third party’s and properly stored and protected and insured and identified as the Seller’sproperty.8.4 Until such time as the property in the goods passes to the Buyer the Seller shall be entitled atany time to require the Buyer to deliver up the goods to the Seller.8.5 The Buyer shall not be entitled to pledge or in any way charge by wayof security for any indebtedness any of the goods which remain the property of the Seller but if theBuyer does so all monies owing by the Buyer to the Seller shall (without prejudice to any other rightor remedy of the Seller) forthwith become due and payable.8.6 In the event of the Buyer reselling the contract goods before property in the contract goodspasses to the Buyer the Buyer shall account to the Seller for all of the proceeds of any re-sale andprior to paying such proceeds to the Seller the Buyer shall hold the same in a fiduciary capacitykeeping the same separate from its other money. On receiving such proceeds pursuant to theBuyer’s obligation to account therefore the Seller shall immediately return to the Buyer any sumreceived in excess of the total of all sums due and owing from the Buyer to the Seller at the dateof receipt by the Seller of such proceeds of sale (including the purchase price of the contractgoods).8.7 Nothing in this Clause 8 shall constitute the Buyer the Agent of the Seller in respect of any re-sale of the contract goods by the Buyer to a third party so as to confer upon such third party rightsagainst the Seller.9. CLAIMS9.1 Advice of damage delay or partial loss of goods in transit or of non-delivery must be given inwriting to the Seller and the Carrier -9.1.1. In the case of damage delay or partial loss within seven days of delivery.9.1.2. In the case of non-delivery within fourteen days of the despatch of goods.9.2 All other claims excluding those arising under Clause 6 must be made in writing to the Sellerwithin twenty one days of delivery.10 LIABILITY10.1 The Seller shall not be liable for indirect loss or third party claims occasioned by delay in com-pleting the work or for loss to the Buyer arising from delay in transit.10.2 Where work is defective for any reason including negligence the Seller’s liability (if any) shallbe limited to rectifying such defect.11.WORK DONE FOR THE BUYER11.1 The Property of the Buyer and all property supplied to the Seller on behalf of the Buyer shallwhilst it is in the possession of the Seller or in transit to or from the Buyer be deemed to be at theBuyer’s risk unlessotherwise agreed and the Buyer should insure accordingly.11.2 The Seller shall be entitled to make a reasonable charge for the storage of any Buyer’s prop-erty left with the Seller before receipt of the order or after notification to the Buyer of completion ofthe work.11.3 The Seller may reject any die tools or other materials supplied or specified by the Buyer whichappear to him to be unsuitable. Additional cost incurred if materials are found to be unsuitable dur-ing production may be charged except that if the whole or any part of such additional cost couldhave been avoided but for unreasonable delay by the Seller in ascertaining the unsuitability of thematerials then that amount shall not be charged to the Buyer.11.4 Where materials are so supplied or specified the Seller will take every care to secure the bestresults but responsibility will not be accepted for imperfect work caused by defects in or unsuitabil-ity of materials so supplied or specified.11.5 Quantities of materials supplied shall be adequate to cover normal spoilage.11.6 If the Buyer ceases to pay his debts in the ordinary course of business or cannot pay his debtsas they become due or being a company is deemed unable to pay its debts or has a winding uppetition against it or being a person commits an act of bankruptcy or has a bankruptcy order issuedagainst him the Seller without prejudice to the other remedies shall-11.6.1 have the right not to proceed further with the contract of any other work for the Buyer andbe entitled to charge for work already carried out(whether completed or not) and materials purchased for the Buyer such charge to be an immedi-ate debt to it and11.6.2 in respect of all unpaid debts due from the Buyer have a general lien in all goods and prop-erty in its possession (whether worked on or not) and shall be entitled on the expiration of 14 days’notice to dispose of such goods or property in such matter and at such price as he thinks fit andto apply to the proceeds towards such debts..11.7 Where the goods are manufactured in accordance with information or drawings supplied bythe Buyer or to the Buyer’s design or specification or where the standard goods of the Seller arealtered in accordance with the buyer’s instructions.11.7.1 no guarantee or warranty is given by the Seller as to the practicability efficiency safety orotherwise of the goods (this being without prejudice to any other of the Contract terms.011.7.2 the Buyer will indemnify and keep the Seller indemnified against all liability incurred by theSeller as a result of such goods infringing any patent registered design copyright or other like pro-tection or the provision of any statute statutory instrument or regulation for the time being in force.11.8 Unless otherwise agreed in writing all patterns, drawings, tools etc produced by the Seller shallremain the property of the seller and must not be used or copied by the buyer. 12 RIGHT OF RE-SALE12.1 If the Buyer defaults in accepting delivery odor paying for the goodsthe Seller reserves the right to re-sell the goods or any of them to the third party without givingnotice to the Buyer of the Seller’s intention to re-sell.13 FORCE MAJEURE13.1 The Seller shall not be liable to the Buyer or be deemed to be in breach of the Contract byreason of any delay in performing or any failure to perform any of the Seller obligations in relationto the goods if the delay or failure was due to any cause beyond the Seller’s reasonable control.Without prejudice to the generality of the foregoing the following shall be regarded as causedbeyond the Sellers’ reasonable control13.1.1 Act of God explosion flood tempest fire or accident.13.1.2 War or threat of war sabotage insurrection civil disturbances or requisition.13.1.3 Acts restrictions regulations bye-laws prohibitions or measuresof any kind on the part of any governmental parliamentary or local authority13.1.4 Import or export regulations or embargoes.13.1.5 Strikes, lock-outs or other industrial actions or trade disputes (whether involving employeesof the Seller or of a third party).13.1.6 Difficulties in obtaining raw materials labor fuel parts of machinery.13.1.7 Power failure or breakdown in machinery.14. APPLICABLE LAW14.1 These conditions and all other express terms of the contract shall begoverned and construed in accordance with the law of England.

FOOTPRINT TOOLS LTD CONDITIONS OF SALEl. INTERPRETATION1.1 In these conditions“BUYER” means the person whose order for goods and/or services is accepted by the Seller.‘GOODS’ means the goods and/or services (including any installment of the goods or any part ofthem) which the Seller is to supply in accordance with these conditions.‘SELLER’ means ‘FOOTPRINT TOOLS LIMITED whose registered office is situated at HOLLISCROFT, SHEFFIELD S13HY and which is registered in England under No. 174158.‘CONDITIONS’ means the standard Terms and Conditions of Sale set out in this document and(unless the context otherwise requires) include any special terms and conditions agreed in writingbetween the Buyer and the Seller.“CONTRACT” means the contract for the purchase and the sale of the gppds/“WRITING’ includes the telex cable facsimile transmission and comparable means of communica-tion.1.2 Any reference in these Conditions to any provision of the Statute shall be construed as a refer-ence to that provision as amended re-enacted or extended at the relevant time.1.3 The heads in these conditions are for convenience only and shall not affect their interpretation.2. BASIS OF THE SALE2.1 Any quotation given by the Seller to the Buyer shall not be an offer but an invitation to treat only.No contract between the Buyer and Seller shall arise unless and until any order of the Buyer is con-firmed by the seller in writing2.2 Any written order of the Buyer which is accepted by the Seller shall besubject to these conditions which shall govern the contract to the exclusionof of any other terms and conditions subject to which any order or acceptance of any quotation ispurported to be accepted by the Buyer..2.3 No variation to these Conditions shall be binding unless agreed in writing between the author-ized representatives of the Buyer and Seller.2.4 The Seller’s employees or agents are not authorized to make any representations concerningthe goods unless confirmed by the Seller in writing. In entering into the Contract the Buyer acknowl-edges that it does not rely on and waives any claim for breach of any such representations whichare not so confirmed.2.5 Any advice or recommendation given by the Seller or its employees or agents to the Buyer orits employers or agents as to the storage application or use of the goods which is not confirmed inwriting by the Seller is followed or acted upon entirely at the Buyer’s own risk and accordingly theSeller shall not be liable for any such advice or recommendation which is not so confirmed.2.6 Any typographical clerical or other error or omission in any sales literature quotation price listacceptance or offer invoice or other document or information issued by the Seller shall be subjectto correction without any liability on the part of the Seller.3.PRICE OF THE GOODS3.1 The contract price of the goods shall be the Seller’s quoted price or where no price has beenquoted or if a quoted price is no longer valid the price listed in the Seller’s published price list cur-rent at the date of acceptance of the order. Any additional charges such as carriage and any otherappropriate items shall be added to the contract price.3.2 Not withstanding the provisions of Clause 3.l above the Seller may levy a small order surchargein respect of any order the value of which is below such a minimum economic level as may be spec-ified from time to time in the Seller’s published price lists.3.3 The Seller reserves the right by giving notice to the Buyer at any time before delivery of an orderto increase the price of the goods to reflect any increase in the cost to the Seller which is due to anyfactor beyond the control of the seller.3.4 The seller will make every endeavor to despatch all goods in free of charge containers butwhenever the nature of the goods necessitates the use of special packing materials these will becharged at cost but this charge will be credited in full if returned in good condition at the expenseof the Buyer within thirty days.3.5 All prices quoted or accepted are exclusive of Value Added Tax and the contract price shall besuch prices plus V.A.T.4.ORDERS AND SPECIFICATIONS4.1 The Buyer shall be responsible to the seller for ensuring the accuracy of the terms of any order(including any applicable specifications) submitted by the Buyer and for giving the Seller any nec-essary information relating to the goods within a sufficient time to enable the seller to perform thecontract in accordance with its terms.4.2 The quantity and description of any specification for the goods shall be set out in the Buyer’sorder.4.3 If the goods are to be manufactured or any process applied to the goods by the Seller in accor-dance with the specification submitted by the Buyer the Buyer shall indemnify the seller against all loss damage costs and expenses awardedagainst or incurred by the Seller in connection with or paid or agreed to be paid by the Seller in set-tlement of any claim for infringement of any patent copyright design trade mark or other industrialor intellectual property rights of any other person which results from the Seller’s use of the Buyer’sspecification.4.4 The Seller reserves the right to make any changes in the specification of the goods which arerequired to conform with any applicable safety or other statutory requirements or where the goodsare to be supplied to the Seller’s specification which do not materially affect their quality or perform-ance or which are appropriate in accordance with the Seller’s policy of continuous improvement.4.5 No order may be cancelled by the Buyer except with the Agreement in writing of the Seller andon terms that the Buyer shall indemnify the Seller in full against all loss (including loss of profits)costs (including the costs of all labor and materials used) damages charges expenses incurred bythe Seller as a result of cancellation.4.6 Quotations are based on the Seller’s current costs of production and, unless otherwise agreedare subject to amendment on or at any time after acceptance to meet any rise or fall in such costs.4.7 Quotations are subject to confirmation on receipt of orders.4.8 Any work carried out whether experimentally or otherwise,at the Buyer’s request shall becharged by the Seller in addition to the contract price.4.9 The Seller reserves the right to refuse any order the value of which is below the minimum eco-nomic level as specified from time to time.5. DELIVERY5.1 Any dates quoted for delivery of goods are approximate only and the Seller shall not be liablefor any delay in delivery of the goods howsoever caused. Time for delivery shall not be of theessence unless previously agreed by the Seller in writing. The goods may be delivered by theSeller of the quoted delivery date upon giving reasonable notice to the Buyer.5.2 Where the goods are delivered in installments each delivery shall constitute a separate contractand failure by the Seller to deliver any one or more of the installments in accordance with these con-ditions or any claim by the Buyer in respect of any one or more installments shall not entitle theBuyer to treat the contract as a whole as repudiated.5.3 If the Buyer fails to take delivery of the goods or fails to give Seller adequate delivery instruc-tions at the time stated for delivery (otherwise than by reason of any cause beyond the Buyer’s rea-sonable control or by reason of the Seller’s fault) then without prejudice to any other right or reme-dy available to the Seller the Seller may -5.3.1 store the goods until actual delivery and charge the Buyer for the reasonable cost (includinginsurance) of storage or5.3.2 sell the goods at the best price readily obtainable and (after deducting all reasonable storageand selling expenses) account to the Buyer for the excess over the price under the contract orcharge the Buyer for any shortfall below the price of the contract.5.4 The Seller shall have the option of revising the delivery date or dates prior to manufacture if cir-cumstances beyond the control prevent the Seller keeping to the originally agreed date or dates.5.5 Should expedited delivery be agreed an extra amount (which in all cases shall be agreed inadvance) may be charged to cover any overtime or any other additional costs involved.5.6 Should work be suspended at the request of or delayed through any default of the Buyer for aperiod of 30 days the Seller shall then be entitled to payment for work already carried out materialsspecifically ordered and other additional cost including storage5WARRANTIES6.1 Subject to the conditions set out below the Seller warrants that the Goods will correspond withtheir specification at the time of delivery and will be free from defects in material and workmanship.6.2 The above warranty is given by the Seller subject to the following conditions:6.2.1 The Seller shall be under no liability in respect of any defect in the Goods arising from anydrawing design specification supplied by the Buyer..6.2.2 The Seller shall be under no liability in respect of any defect arising from fair wear and tearwilful damage negligence abnormal working conditions failure to follow the Seller’s instructions inwriting misuse or alterations or repair of the Goods without the Seller’s approval.6.2.3 The Seller shall be under no liability under the above warranty (or any other warranty condi-tion or guarantee) if the total price for the Goods has not been paid by the due date for payment.6.2.4 The above warranty does not extend to parts materials or equipment not manufactured by theSeller in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guar-antee as is given by the manufacturer to the Seller.6.3 Any claim by the buyer which is based on any defect in the quality or condition of the Goods ortheir failure to correspond with specifications shall (whether or not delivery is refused by the Buyer)be notified to the Seller within six months from date of delivery. Time shall be of the essence of thecontract in relation to this clause. If delivery is not refused and the Buyer does not notify the Selleraccordingly the Buyer shall not be entitled to reject the Goods and the Seller shall have no liabilityfor such defect or failure and the Buyer shall be bound to pay the price as if the Goods had beendelivered in accordance with the Contract.6.4 Where any valid claim in respect of any of the Goods which is based on any defect in the qual-ity or condition of the Goods or other failure to meet specification is notified to the Seller in accor-

21

Welcome to the new addition of The Footprint North American catalogue whichillustrates the wide and comprehensive range of hand tools available under the

Footprint brand for our many customers throughout the continent of North America.

With it’s roots firmly anchored in the manufacturing base in Sheffield, England,Footprint has over many decades come to be synonmous with top quality hand

tools at prices which offer genuine value for money.

Our expertise in manufacturing, dating back to the 1760’s, provides a unique blend of products manufactured to the exacting standards expected of Sheffield, thus

British Made, items and the ability to search out those factories elsewhere in the world from which products can be sourced, manufactured to the high standards

expected of the brand Footprint.

Having retained our manufacturing facility in Sheffield with its Forge,Hardening, Machining and Finishing departments, we are able to put the words

“Made in Sheffield” on many of our products and yet at the same time you, our customer, know that we have retained the knowledge and experience to ensure

that our products, wherever they may come from, will do the job they were designed to do.

We continue as a family managed business and 2004 has seen the company beginthe process of moving through to the fourth generation of the Jewitt family.

My son Richard has joined us with many new and exciting ideas thus providing that all important impetus essential for any successful business.

We thank you for your support and can ensure you of our continued attention to those important values of tradition, quality and service backed by investment

in technology, in excellence of product and in our people.

Christopher J. JewittPresident and CEO

Footprint Tools Limited Sheffield, England

Designed By: Summit Associates The Management Group for Visual CommunicationEmail: summitstudioone@rogers.com

North American Product Catalogue

Canada U.K.

Footprint Tools Canada Limited1745 Bonhill Road, Unit 4Mississauga, ON L5T 1C1

Tel:(905) 564-6007 Fax:(905) 564-0059Email:sales@footprint-tools.ca

www.footprint-tools.ca

Footprint Tools LimitedSheffield England S13HYwww.footprint-tools.co.uk