Norma AP 6D

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. 1

API 6D|API600|API 6A Std Cast Steel|Stainless Steel

Valve



ITEMS DESCRIPTIONS PAGE REFERENCE 1 Covering Page 1 2 Descriptions 2 3 Lanus Products - ANSI Std Cast Steel and Stainless Steel Valve 3 4 Standard Material for Gate,Globe,Check Valve,Pressure Seal Valve, Bellow Seal

Valve,Parallel Slab Gate Valve,Plate Gate Valve, Creyogenic Valve,Y-Strainer 4~5

5 Engineering Data 6 7 Design of Gate Valve 7 8 Name Plate 8 9 Gate Valve – ANSI Cl 150~2500Lb Cast Steel & Stainless Steel 9~14 10 Globe Valve – ANSI Cl 150~2500Lb Cast Steel & Stainless Steel 15~22 11 Check Valve – ANSI Cl 150~2500Lb Cast Steel & Stainless Steel 23~30 12 Tilting Check Valve – ANSI Cl 150~2500Lb Cast Steel & Stainless Steel 31~33 13 Pressure Seal Gate Valve – ANSI Cl 600~2500Lb Cast Steel & Stainless Steel 34~36 14 Pressure Seal Globe Valve – ANSI Cl 600~2500Lb Cast Steel & Stainless

Steel 37~39

15 Pressure Seal Check Valve – ANSI Cl 600~2500Lb Cast Steel & Stainless Steel 40~42 16 Bellow Seal Gate Valve – ANSI Cl 600~2500Lb Cast Steel & Stainless

Steel 43~46

17 Bellow Seal Globe Valve – ANSI Cl 600~2500Lb Cast Steel & Stainless Steel

47~48

18 Parallel Slab Gate Valve - ANSI CL 150~1500Lbs Cast Steel and Stainless Steel 49~51 19 Plate Gate Valve - ANSI CL 150~1500Lbs Cast Steel and Stainless Steel 52~54 20 Creyogenic Gate Valve – CL150~600Lbs Cast Steel and Stainless Steel 55~58 21 Y Strainer – CL 125Lb and Cl 250Lb Cast Iron & Ductile Iron Gate Valve 59~60 22 CL 150 LBS RF ANGLE PATTERN GLOBE VALVE & SDNR ANGLE GLOBE VALVE

( API TRIM 5 or TRIM 8 ) 61

22 CL 150 LBS RF ANGLE PATTERN GLOBE VALVE & SDNR ANGLE GLOBE VALVE ( API TRIM 5 or TRIM 8 )

62


63


64


65


66

27 Y Strainer – Cl 150 ~ 1500Lbs Cast Steel & Stainless Steel Y-Strainer 67~75 28 Valve’s Welding End Detail 76 29 ASME|ANSI Flange Dimensions – Cl 150~-2500Lbs Cast Steel & Stainless Steel 77~84 30 Chemical Compositions and Mechanical Properties – Cast Steel & Stainless Steel and Alloy

Steel 85

31 Maximum Flange Torque Value and ISO 5211 Flanges Dimensions 86-87 32 ANSI Cl 150~2500# Valve Working Temperature and Working Pressure 88-89 33 Alloy Steel Material Specifications 90 34 Cast Iron and Ductile material specifications 91 35 LANUS Casting Materials 92 36 Duplex Valve and Materials Specifications and Supplex Valve and Materials Specifications 93-94 37 Compositions for CuNi 90/10 & CuNi70/30 95 38 Molybdenum Stainless Steels 96~97 39 ASME Standard Code numbers and applicant 98~101 40 API Standard Code numbers and applicant 102~103 41 BS Standard Code numbers and applicant 104 42 Catalogue back cover page 105

Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,.



Welcome to LANUS INDUSTRIES LLC — The LANUS is one of the leading wholesale suppliers of API 6D,API 608,API 6A, API607 standard VALVES in the United States.

LANUS is headquartered in W.O USA. Our business mainly is supplied for North and South America and North Sea Oil and Gas industries. We manufactured all kinds of valves supplying for Oil and Gas Plant, petrol chemical, oil refineries and power plant. We also OEM manufacturing in accordance to customers design and requirement. Our valves are manufactured by our cooperated plant in Maxico,Europe,China,India,Korea,Taiwan and Japan etc,. Technical engineering and “Q.C” control engineer permanent stay at our cooperated plant.and our distributors covering North & South America,Europe,Middle,S.E.A countries etc,.

INTRODUCTION

Thank you for your interest in Lanus Industries LLC USA. I am pleased to take this opportunity to introduce our company and product line to you. Lanus was incorporated in 2005 with corporate headquarters, manufacturing and supplies API 6D, API 6A, API 607 valves. Our cooperated factories with API 6A,API 6D and API 607 monogram license holder and our cooperated plant is certified to ISO9001: 2000. LANSU is proud to offer the widest product line of any valve manufacturer in the world. This line includes, but is not limited to: Cast Steel,Forged Steel,Stainless Steel,Alloy Steel,Copper Alloy Gate, Globe and Check Valves, Plug Valve, HPT Butterfly Valve, Kniew Gate Valve, Safety and Relief Valve, Lever Guage Cock, Slide Expansion Joints, Unit body,2pcs Split body Floating Ball Valve,2pcs and 3pcs body Trunnion Mounted Ball Valve,metal to metal Seated Ball Valve, Orbit type Ball Valve and Plug Valve Fabricated Through Conduit Pipeline Gate Valves Pressure Seal Valves Bellow Seal Valves Creyogenic Valves etc,. Sub-Sea Valves Low and High Temperature Valve Lanus is unique in that all our valves are available in all ANSI and API pressure classes and virtually any metallurgy required. From cast iron,ductile iron,carbon steel and alloy steel to stainless steel and exotics including titanium and Aluminium Bronze, Lanus can accommodate the most ordinary and extraordinary requirements. We also kept some stock at our Cooperated Plant for prompt shipment, and level of services, product availability and competitive pricing rarely found in our industry. We thank you for interest in Lanus and look forward to providing solutions to your requirements. If you have any questions, please feel free to contact our office anytime. Sincerely, Managing Sales Director Lanus Industries LLC USA



Our cooperated factories with API 6A, API 6D, API 607 monogram license holder and our cooperated plants is certified

to ISO 9001: 2000.

API 6A API 6D API 607

CERTIFICATION TUV CERTIFICATE DNV CERTIFICATE

ISO 9001: 2000 CERTIFICATE



Lanus Products ANSI STD CL 150~2500Lbs

Cast Steel & Stainless Steel Valve



CLass 150~2500 Lbs Cast Steel & Stainless Steel

Gate Globe Swing Check Valve Pressure Seal Valve Bellow Seal Valve

Creyogenic Valve Strainer FEATURES SPECIFICATIONS

STANDARD MATERIALS OF PARTS ITEM PART

NAME WCB LCB

CF8 CF8M

1 Body & Bonnet A216 Gr.WCB A352 Gr LCB A351-CF8(304) A351-CF8M(316)

2 Seat Ring ASTM A105+Stellite Faced

A352 Gr LCB + Stellite Faced

A351-CF8(304) + Stellite Faced

A351-CF8M(316) + Stellite Faced

3 Disc ASTM A216 Gr.WCB+13Cr Faced

A352 Gr LCB A351-CF8(304) A351-CF8M(316)

4 Stem ASTM A182 Gr.F6 ASTM A182 Gr. F6 A351-CF8(304) A351-CF8M(316)

5 Bonnet Gasket Soft Iron+ PTFE.or graphite PTFE.or graphite PTFE.or graphite

6 Bonnet ASTM A216 Gr.WCB A352 Gr LCB A351CF8(304) A351CF8M(316)

7 Bonnet Bolt Nuts ASTM A194 Gr.2H ASTM A194 8/8F ASTM A194 8/8F ASTM A194 8/8F

8 Bonnet Bolt ASTM A193 Gr. B7 ASTM A193 Gr. B8 ASTM A193 Gr. B8 ASTM A193 Gr. B8

9 Backseat Bushing ASTM A276 Type 410 Integral Integral Integral

10 Stem Packing

Braided Graphite & Die Formed Graphite Ring

PTFE.or Graphite PTFE.or Graphite PTFE.or Graphite

11 Eye Bolt Pins ASTM A307 Gr.B ASTM A307 Gr.B 304SS 304SS

12 Gland Eye Bolts ASTM A307 Gr. B ASTM A307 Gr.B 304SS 304SS

13 Gland ASTM A307 Gr. B CF8 CF8M 14 Gland

Flange ASTM A216

Gr. WCB ASTM A307 Gr.B CF8 CF8M

15 Eye Bolt Bolts

ASTM A194 Gr. 2H 304SS 304SS 304SS

16 Grease Nipple

Carbon Steel 304SS 304SS 304SS

17 Stem Nut ASTM A439 Gr D-2 ASTM A439 Gr D-2 or 304SS

304SS 304SS

18 Retaining Carbon Steel Carbon Steel or 304SS 304SS 316SS 19 Handwheel Ductile Iron Ductile Iron Ductile Iron Ductile Iron 20 Handwheel Carbon Steel Carbon Steel or 304SS Carbon Steel or 304SS Carbon Steel or 304SS



Nut 21 Screw Carbon Steel 304SS 304SS 304SS 22 Yoke Carbon Steel A352 Gr LCB 316SS 316SS 23 Yoke Pan

Bolt Nuts ASTM A216 Gr. WCB A352 Gr LCB ASTM A193 Gr. B8 ASTM A193 Gr. B8

24 Yoke Pan Bolts

ASTM A193 Gr. B7 ASTM A193 Gr. B7 304SS 304SS

25 Bearing Steel 304SS 304SS 316SS

ITEM PART NAME

CF3 STAINLESS

STEEL

CF3M STAINLESS

STEEL WC5 WC6

01 Body & Bonnet

A351-CF3(304L) A351-CF3M(316L) A217 Gr C5 A217 Gr WC6

02 Body & Cover

A351-CF3(304L) A351-CF3M(316L) A217 Gr C5 A217 Gr WC6

03 Seat Ring A351-CF3(304L) A351-CF3M(316L) A217 Gr C5 A351-CF8(304) + Stellite Faced

04 Disc A351-CF3(304L) A351-CF3M(316L) A217 Gr C5 A217 Gr WC6 05 Stem A351-CF3(304L) A351-CF3M(316L) A182 F5A217 Gr C5 A217 Gr WC6 06 Yoke A351-CF3(304L) A351-CF3M(316L) A182 F5 A217 Gr WC6 07 Back up ring SS304L SS316L A182 F5 A182 F11 08 Thurst Ring A182 F5 A182 F22 A217 Gr C5 A182 F304 09 Gasket SS304 SS304 A182 F5 SS304

10 Cover stud&nut

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7 A217 Gr C5 A193 Gr B16/A194 Gr

4/7

11 Yoke stud&nut

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7 A217 Gr C5 A193 Gr B16/A194 Gr

4/7

ITEM PART NAME WC9 C12 C15 Duplex &

Supper Duplex

01 Body & Bonnet A217 Gr WC9

A217 Gr C12 A217 Gr C15

F51 and UNS S32750/ UNS 32760

02 Seat

Ring

A217 Gr WC9 + Stellite Faced

A217 Gr C12 A217 Gr C15 F51

03 Disc A217 Gr WC9 A217 Gr C12 A217 Gr C15 F51 04 Stem A217 Gr WC9 A217 Gr C12 A217 Gr C15 F51 05 Yoke A217 Gr WC9 A217 Gr C12 A217 Gr C15 F51 06 Back up ring A182 F22 A182 F22 A182 F22 316SS 07 Thurst ring A182 F316 A182 F22 A182 F22 F51 08 Gasket SS304 A182 F22 A182 F22 A182 F22

09 Cover stud&nut

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

10 Yoke stud&nut

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7




ENGINEERING DATA

VALVE TESTING

100% of valves manufactured by Lanus are tested in excess of API 6A and API 6D requirements, prior to shipping.

LEAKAGE RATES STANDARD SOFT SEATED METAL SEATED CRYOGENIC

API 6A| API 6D ISO 5208 Rate A ISO 5208 Rate D (1) BS 12266-1 - Rate D (1)

*Please consult the factory.

STANDARD PERFORMANCE TEST 1 Visual & dimensional check 4 Low pressure air seats test 2 High pressure hydrostatic shall test 5 Stem torque check 3 High pressure hydrostatic seats test

RATING(1) BODY TEST H.P.SEAT TEST AIR SEAT TEST

PSI BAR KG/CM2 PSI BAR KG/CM2 PSI BAR KG/CM2 PSI BARE KG/CM2 ANSI 150 275 19 19.3 413 28.5 29 303 20.9 21 100 6 7 ANSI 300 720 50 51 1080 75 77 792 55 56 100 6 7 ANSI 600 1440 99 101 2160 148.5 152 1584 108.9 111 100 6 7 ANSI 900 2160 149 152 3240 223.5 228 2376 163.9 167 100 6 7

ANSI 1500 3600 248 253 5400 372 380 3960 272.8 278 100 6 7 ANSI 2500 5988 413 421 8982 619.5 632 6587 454.3 463 100 6 7 API 3000 3000 207 210 4500 310.5 315 3300 227.7 231 100 6 7 API 5000 5000 345 352 7500 517.5 528 5500 379.5 387 100 6 7

API 10000 10000 690 703 15000 1035 1055 11000 759 773 100 6 7 (1) Typical only – Rating pressure may change for different materials.

(2) Conversin Factors 1 bare = 14.5 psi & 1bar = 0.981 kg/cm2 & 1 bar = 100kpa 1kg/cm2 = 14.22 psi.

QUALITY STANDARDS

AMERICAN PETROLEUM INSTITUTE - API BRITISH STANDARDS API 6D API 6FA API 598 BS EN 10222 BS EN 9000 API 6A API 607 API 605 BS 1560 BS EN 10213

BS 4504 BS 4N 12266 BS5351

AMERICAN SOCIETY OF MECHANICAL MANUFACTURERS STANDARDIZATION ASME B 16.5 ASME B 16.10 ASME B 16.25 MSS SP 6 MSS SP 25 ASME B16.34 ASME B 31.3 ASTM B 31.8 MSS SP 44 MSS SP 45 ASME B 46.1 MSS SP 55

MSS SP 72

INTERNATIONAL ORGANIZATION for STANDARDISATION – ISO

COMPLIANT TO CSA Z245

ISO 9001: 2000 ISO 14313




Design of CLass 150~2500 Lbs

Cast Steel and Stainless Steel Gate Valve

Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass,

Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,.



NAME PLATE

ASME/ANSI CL 150LBS ASME/ANSI CL 900LBS

ASME/ANSI CL 300LBS ASME/ANSI CL 1500LBS

ASME ANSI CL 600LBS ASME/ANSI CL 2500LBS




ANSI CL 150Lbs Cast Steel and Stainless Steel Wedge Gate Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1414 · Face To Face : ASME / ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME / ANSI B16.10/ANSI B16.34 · Inspection Test: API 598,API 6D · Body Material: A216-WCB/WCC, A351-CF8, A351-CF8M, A351-CF3,A351-CF3M · size:2”-36” Main Size And Weight-150LB

ANSI CL 150Lbs Cast Steel and Stainless Steel Wedge Gate Valve

Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 178 191 203 229 254 267 292 330 356 381 406 432 457 508 559 610 610 710 762 711 -

L1-BW MM 216 241 283 305 - 403 419 457 502 572 610 660 711 813 864 914 914 965 1016 1016 - L2-RTJ MM 191 203 216 241 - 279 305 343 368 394 419 445 470 521 559 610 610 710 762 711 -

H MM 400 490 510 585 - 795 1015 1230 1465 1755 2030 2210 2510 2880 2930 3150 3200 3450 3600 3735 - W MM 200 200 250 300 - 350 350 400 450 500 500 600 750 750 915 915 915 1000 1000 1000 -

RF KG 18 28 30 50 - 85 128 220 310 450 700 810 1130 1680 2230 2780 2860 3050 3700 3700 - BW KG 15 22 26 40 - 77 118 200 290 435 650 880 1100 1800 2200 2650 2950 3250 3520 3520 -

WT

RTJ KG 20 29 37 56 - 84 138 210 310 450 740 927 1125 1700 2235 2800 2900 3070 3750 3750 -



ANSI CL 300Lbs Cast Steel and Stainless Steel Wedge Gate Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1414 · Face To Face : ASME / ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME / ANSI B16.10/ANSI B16.34 · Inspection Test: API 598, API 6D · Body Material: A216-WCB/WCC, A351-CF8, A351-CF8M, A351-CF3,A351-CF3M · size:2”-36” Main Size And Weight-300LB


Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 216 241 283 305 - 403 419 457 502 762 838 914 991 3980 1245 1346 1397 1524 1626 1727 -

L1-BW MM 216 241 283 305 - 403 419 457 502 762 838 914 991 3370 1245 1346 1397 1524 1626 1727 - L2-RTJ MM 232 257 298 321 - 419 435 473 518 778 854 930 1010 4000 1270 1372 1422 1553 1654 1756 -

H MM 470 525 533 610 - 845 1050 1295 1600 1830 2035 2195 2470 2900 3100 3360 3650 3700 3750 3800 W MM 200 200 250 300 - 350 350 400 450 500 500 600 750 750 915 915 915 1000 1000 1000 -

RF KG 24 44 48 73 - 145 226 350 580 715 1050 1235 1655 2320 2860 3275 4230 4572 4850 5240 - BW KG 24 44 48 73 - 145 226 350 580 715 1050 1235 1655 2320 2860 3275 4230 4572 4850 5240 -

WT

RTJ KG 20 35 37 54 - 110 174 285 495 615 940 1090 1500 2100 2580 3300 4000 4350 4510 4895 -



ANSI CL 600Lbs Cast Steel and Stainless Steel Wedge Gate Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1414 · Face To Face : ASME / ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME / ANSI B16.10/ANSI B16.34 · Inspection Test: API 598, API 6D · Body Material: A216-WCB/WCC, A351-CF8, A351-CF8M, A351-CF3,A351-CF3M · size:2”-36” Main Size And Weight-600LB


Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 292 330 356 432 - 559 660 787 838 889 991 1092 1194 1397 1448 1549 1651 1778 1930 2083 -

L1-BW MM 292 330 356 432 - 559 660 787 838 889 991 1092 1194 1397 1448 1549 1651 1778 1930 2083 - L2-RTJ MM 295 333 359 435 - 562 664 791 841 892 994 1095 1200 1407 1461 1562 1664 1794 1946 2099 -

H MM 495 550 615 735 - 1005 1245 1480 1730 1915 2050 2260 2620 2900 3075 3238 3600 3940 4250 4400 - W MM 200 250 300 350 - 450 500 600 750 850 850 960 960 1000 1000 1250 1250 1500 1650 1800 -

RF KG 35 55 72 126 - 365 444 700 940 1310 1610 2070 2405 3810 4380 4910 5240 6835 7430 8800 - BW KG 35 55 72 126 - 365 444 700 940 1310 1610 2070 2405 3810 4380 4910 5240 6835 7430 8800 -

WT

RTJ KG 32 47 64 103 - 218 374 570 830 1012 1217 1760 2000 3200 3970 4280 4875 5615 6630 7610 -



ANSI CL 900Lbs Cast Steel and Stainless Steel Wedge Gate Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1414 · Face To Face : ASME / ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME / ANSI B16.10/ANSI B16.34 · Inspection Test: API 598, API 6D · Body Material: A216-WCB/WCC, A351-CF8, A351-CF8M, A351-CF3,A351-CF3M · size:2”-36” · Main Size And Weight-900LB


Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 - - - - - - -

L1-BW MM 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549 - - - - - - - L2-RTJ MM 371 422 384 460 613 740 841 968 1038 1140 1232 1334 1568 - - - - - - -

H MM 590 700 740 870 1120 1390 1592 1765 2025 2175 2510 2750 3240 - - - - - - - W MM 250 300 350 450 500 600 750 850 850 960 960 1000 1000 - - - - - - -

RF KG 59 79 115 198 407 725 1091 2161 2161 3197 4409 6063 7937 - - - - - - - BW KG 59 79 115 198 407 725 1091 2161 2161 3197 4409 6063 7937 - - - - - - -

WT

RTJ KG 53 71 103 178 366 652 981 1945 1945 2877 3968 5456 7145 - - - - - - -





Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 368 419 470 546 - 705 832 991 1130 1257 1384 1537 1664 1943 - - - - - - -

L1-BW MM 368 419 470 546 - 705 832 991 1130 1257 1384 1537 1664 1943 - - - - - - - L2-RTJ MM 371 422 473 549 - 711 841 1000 1146 1276 1407 1559 1686 1972 - - - - - - -

H MM 615 705 750 927 - 1190 1525 1855 2185 2215 2380 2580 2195 3400 - - - - - - - W MM 250 350 350 450 - 600 750 850 850 960 960 1000 1000 1250 - - - - - - -

RF KG 116 166 209 296 - 720 1275 2092 2951 4382 6355 8965 13100 15862 - - - - - - - BW KG 116 166 209 296 - 720 1275 2092 2951 4382 6355 8965 13100 15862 - - - - - - -

WT

RTJ KG 105 150 188 265 - 650 1145 1880 2655 3945 4752 8070 11790 14275 - - - - - - -





Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 451 508 578 673 - 914 1022 1270 1422 - - - - - - - - - - - -

L1-BW MM 451 508 578 673 - 914 1022 1270 1422 - - - - - - - - - - - - L2-RTJ MM 454 514 584 683 - 927 1038 1292 1445 - - - - - - - - - - - -

H MM 700 750 887 1079 - 1450 1610 2076 2281 - - - - - - - - - - - - W MM 350 450 450 500 - 610 610 610 610 - - - - - - - - - - - -

RF KG 135 210 271 506 - 1600 2450 4570 7150 - - - - - - - - - - - - BW KG - - - - - - - - - - - - - - - - - - - - -

WT

RTJ KG - - - - - - - - - - - - - - - - - - - - - Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass,




ASME|ANSI Std Cl 150~2500Lbs Cast Steel and Stainless Steel

Globe Valve






Globe Valve FEATURES

Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1873. Body and Bolted Bonnet. Outside Screw. Plug type Disc. · Face To Face : ASME/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME/ANSI B16.34 · Inspection Test: API 598,API 6D. . Anti-friction ball thrust bearing: Reduces friction between mating parts to ensure smooth operation . Grub screw: Secures yoke nut in the bonnet . Grease nipple: Supplies lubricant to the mating parts · Body Material: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M · size:2”-36”

MATERIAL SPECIFICATIONS A216-WCB/WCC, A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M, A352 Gr LCB, CF3, CF3M, WC5,WC6,C12,C15, F51 and Super Duplex and Supper Duplex.



ANSI CL 150Lbs Cast Steel and Stainless Steel Globe Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1873. OS&Y.Rising Stem.Plug type Disc. · Face To Face : ASME/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME/ANSI B16.34 · Inspection Test: API 598,API 6D. . Anti-friction ball thrust bearing: Reduces friction between mating parts to ensure smooth operation . Grub screw: Secures yoke nut in the bonnet . Grease nipple: Supplies lubricant to the mating parts · Body Material: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M · size:2”-36” · Main Size And Weight-150LB

ANSI CL 150Lbs Cast Steel and Stainless Steel Globe Valve

Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 203 216 241 292 356 406 495 622 698 787 914 978 - - - - - - - - -

L1-BW MM 203 216 241 292 356 406 495 622 698 787 914 978 - - - - - - - - L2-RTJ MM 216 229 254 305 368 419 508 635 711 800 927 991 - - - - - - - -

H MM 330 390 410 475 540 585 725 825 940 1200 1270 1300 - - - - - - - - - W MM 200 250 250 300 350 350 450 500 600 600 650 650 - - - - - - - - -

RF KG 23 29 40 59 95 115 178 268 385 540 760 1050 - - - - - - - - BW KG 23 29 40 59 95 115 178 268 385 540 760 1050 - - - - - - - - -

WT

RTJ KG 23 29 40 59 95 115 178 268 385 540 760 1050 - - - - - - - - -



ANSI CL 300Lbs Cast Steel and Stainless Steel Globe Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1873. OS&Y.Rising Stem.Plug type Disc. · Face To Face : ASME/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME/ANSI B16.34 · Inspection Test: API 598,API 6D . Anti-friction ball thrust bearing: Reduces friction between mating parts to ensure smooth operation . Grub screw: Secures yoke nut in the bonnet . Grease nipple: Supplies lubricant to the mating parts · Body Material: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M · size:2”-36” · Main Size And Weight-300LB


Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 267 292 318 356 400 444 559 622 711 838 863 - - - - - - - - - -

L1-BW MM - - - - - - - - - - L2-RTJ MM - - - - - - - - - -

H MM 350 425 485 520 565 655 825 920 1155 1250 1295 - - - - - - - - - - W MM 200 250 300 300 350 350 500 600 700 700 1350 - - - - - - - - - -

RF KG 31 40 65 80 129 162 267 365 511 742 1147 - - - - - - - - - - BW KG - - - - - - - - - - - - - - - - - - - - -

WT

RTJ KG - - - - - - - - - - - - - - - - - - - - -



ANSI CL 600Lbs Cast Steel and Stainless Steel Globe Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1873. OS&Y.Rising Stem.Plug type Disc. · Face To Face : ASME/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Pressure-Temp: ASME/ANSI B16.34 · Inspection Test: API 598, API 6D . Anti-friction ball thrust bearing: Reduces friction between mating parts to ensure smooth operation . Grub screw: Secures yoke nut in the bonnet . Grease nipple: Supplies lubricant to the mating parts · Body Material: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M · size:2”-36” · Main Size And Weight-600LB.


Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 292 330 356 432 508 559 660 787 - - - - - - - - - - - - -

L1-BW MM 292 330 356 432 508 559 660 787 - - - - - - - - - - - - - L2-RTJ MM 295 333 359 435 511 562 664 791 - - - - - - - - - - - - -

H MM 420 490 550 590 620 700 950 1140 - - - - - - - - - - - - - W MM 250 300 300 350 500 500 600 600 - - - - - - - - - - - - -

RF KG 39 61 76 122 210 245 447 - - - - - - - - - - - - - - BW KG - - - - - - - - - - - - - - - - - - - - -

WT

RTJ KG - - - - - - - - - - - - - - - - - - - - -





Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 368 419 381 457 559 610 737 - - - - - - - - - - - - - -

L1-BW MM 368 419 381 457 559 610 737 - - - - - - - - - - - - - L2-RTJ MM 371 422 384 460 562 613 740 - - - - - - - - - - - - -

H MM 495 540 600 655 670 780 1050 - - - - - - - - - - - - - - W MM 300 350 350 500 500 350 ? 350 ? - - - - - - - - - - - - - -

RF KG 96 79 117 178 305 355 730 - - - - - - - - - - BW KG - - - - - - - - - - - - - - - - - - - - -

WT

RTJ KG - - - - - - - - - - - - - - - - - - - - -





Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 368 419 470 546 705 706 832 - - - - - - - - - - - - - -

L1-BW MM 368 419 470 546 705 706 841 - - - - - - - - - - - - - L2-RTJ MM 371 422 473 549 711 711 841 - - - - - - - - - - - - -

H MM 550 580 625 750 925 1143 1345 - - - - - - - - - - - - - - W MM 300 350 400 450 600 670 910 - - - - - - - - - - - - - -

RF KG 116 125 145 210 475 540 970 - - - - - - - - - - BW KG - - - - - - - - - - - - - - - - - - - - -

WT

RTJ KG - - - - - - - - - - - - - - - - - - - - -





Dimensions & Weight ( Kgs ) SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 451 508 578 678 - 914 1022 - - - - - - - - - - - - - -

L1-BW MM 451 508 578 678 - 914 1022 - - - - - - - - - - - - - L2-RTJ MM 454 514 584 684 - 827 933 - - - - - - - - - - - - -

H MM 720 800 835 883 - 1200 2495 - - - - - - - - - - - - - - W MM 400 500 560 560 - 610 610 - - - - - - - - - - - - - -

RF KG 178 264 308 750 - 1180 4380 - - - - - - - - - - BW KG - - - - - - - - - - - - - - - - - - - - -

WT

RTJ KG - - - - - - - - - - - - - - - - - - - - -





Swing Check Valve Body & Bolted Cover,Swing Type Disc.






Swing Check Valve Body & Bolted Cover,Swing Type Disc.

DESIGN FEATURES Design & Manufacture standards: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc. Threaded or Welded seat ring. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request Butt welded end: ANSIB16.25 Size:2”-36”

Materials List NO. Part name WCB LCB WC6 WC9

12 Disc nut Carbon steel/stainless steel A352 Gr LCB A217 Gr WC6 A217 Gr WC9 11 Washer Carbon steel/stainless steel A352 Gr LCB A217 Gr WC6 A217 Gr WC9

10 Hinge pin CS+SS/SS/SS+STL(see body materials) A352 Gr LCB A217 Gr WC6 A217 Gr WC9

09 Seat ring CS+SS/SS/SS+STL(see body materials) A352 Gr LCB A217 Gr WC6 A217 Gr WC9

08 Disc A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

07 Bolt stud&nut A193 Gr B7/A194 Gr 2H A320 Gr L7/A194 Gr 4 A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

06 Cover bolt&nut A193 Gr B7/A194 Gr 2H A320 Gr L7/A194 Gr 4 A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

05 Gasket Spiral wound/soft iron Spiral wound/soft iron spiral wound/SS304 spiral wound/SS304 04 Hinge yoke A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 03 Hinge A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 02 Cover A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 01 Body A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

NO. Part name C5 C12 CF8 CF8M 12 Disc nut A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 11 Washer A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 10 Hinge pin A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 09 Seat ring A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 08 Disc A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

07 Bracket stud&nut A193 Gr B16/A194 Gr 4 A193 Gr B16/A194 Gr 4/7 A193 Gr B8/A194 Gr 8 A193 Gr B8M/A194 Gr

8M

06 Cover bolt&nut A193 Gr B16/A194 Gr 4 A193 Gr B17/A194 Gr 4/7 A193 Gr B8/A194 Gr 8 A193 Gr B8M/A194 Gr

8M 05 Gasket Spiral wound/soft iron Spiral wound/SS304 spiral wound/SS304 spiral wound/SS316 04 Hinge yoke A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 03 Hinge A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 02 Cover A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 01 Body A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M




ANSI CL 150Lbs Cast Steel and Stainless Steel Swing Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc.Threaded or Welded seat ring. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request Butt welded end: ANSIB16.25 Main Sizes & Weight CL 150Lb Specification: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M, A352 Gr LCB,CF3, CF3M, CN7M.WC5, WC6, C12,C15,F51 and Super Duplex and Supper Duplex.

ANSI CL 150Lb Dimensions & Weight ( Kgs )

SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 203 216 214 292 330 356 495 622 699 787 864 978 978 1295 - - - - - - -

L1-BW MM 203 216 214 292 330 356 495 622 699 787 864 978 978 1295 - - - - - - - L2-RTJ MM 216 229 254 305 343 368 508 635 717 800 876 991 991 1308 - - - - - - -

H MM 155 190 200 225 245 260 350 390 410 435 530 570 625 675 - - - - - - - RF KG 15 24 35 43 72 88 121 216 333 470 574 785 910 1237 - - - - - - - BW KG 155 190 200 225 245 260 350 390 410 435 530 570 625 675 - - - - - - -

WT

RTJ KG 155 190 200 225 245 260 350 390 410 435 530 570 625 675 - - - - - - -

Remarks:1. Larges sizes available 2. Relative products



ANSI CL 300Lbs Cast Steel and Stainless Steel Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc.Threaded or Welded seat ring. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request Butt welded end: ANSIB16.25 Main Sizes & Weight CL 150Lb Specification: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M, A352 Gr LCB,CF3, CF3M, CN7M.WC5, WC6, C12,C15,F51 and Super Duplex and Supper Duplex.


SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 267 292 318 355 400 440 533 622 711 838 863 977 1016 1346 - - - - - - -

L1-BW MM 267 292 318 355 400 440 533 622 711 838 863 977 1016 1346 - - - - - - - L2-RTJ MM 283 308 333 371 416 460 549 638 727 854 879 994 1036 1368 - - - - - - -

H MM 180 200 225 240 275 310 370 410 440 500 545 605 675 785 - - - - - - - RF KG 22 31 49 68 103 154 234 376 437 651 789 957 1322 2200 - - - - - - - BW KG 22 31 49 68 103 154 234 376 437 651 789 957 1322 2200 - - - - - - -

WT

RTJ KG 22 31 49 68 103 154 234 376 437 651 789 957 1322 2200 - - - - - - -




ANSI CL 600Lbs Cast Steel and Stainless Steel Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc.Threaded or Welded seat ring. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request Butt welded end: ANSIB16.25 Main Sizes & Weight CL 150Lb Speciification: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M, A352 Gr LCB,CF3, CF3M, CN7M.WC5, WC6, C12,C15,F51 and Super Duplex and Supper Duplex.


SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 48 L-RF MM 368 419 381 457 559 610 737 838 965 1029 - - - - - - - - - - -

L1-BW MM 368 419 381 457 559 610 737 838 965 1029 - - - - - - - - - - - L2-RTJ MM 371 422 384 460 562 613 740 841 968 1038 - - - - - - - - - - -

H MM 195 235 260 275 320 370 435 520 530 580 - - - - - - - - - - - RF Kg 51 74 97 135 161 287 515 910 1064 1211 - - - - - - - - - - - BW KG 51 74 97 135 161 287 515 910 1064 1211 - - - - - - - - - - -

WT

RTJ KG 51 74 97 135 161 287 515 910 1064 1211 - - - - - - - - - - -




ANSI CL 900 Lbs Cast Steel and Stainless Steel Swing Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request Butt welded end: ANSIB16.25 Main Sizes & Weight – 900~2500Lb Bolted cover,swing type disc Threaded or welded seat ring ASTM A216 WCB,A217 WC6,A351CF8,A351CF8M,A351 CF3,A351 CF3M,A351 CN7M.


SIZE Inch 2 2.5 3 4 5 6 8 10 12 14 L-RF MM 368 419 381 457 559 610 737 838 965 1029

L1-BW MM 368 419 381 457 559 610 737 838 965 1029 L2-RTJ MM 371 422 384 460 562 613 740 841 968 1038

H MM 195 235 260 275 320 370 435 520 530 580 RF KG 70 100 131 150 265 325 510 610 810 1211 BW KG 70 100 131 150 265 325 510 610 810 1211

WT

RTJ KG 70 100 131 150 265 325 510 610 810 1211 Remarks:1. Larges sizes available 2. Relative products



ANSI CL 1500Lbs Cast Steel and Stainless Steel Swing Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request Butt welded end: ANSIB16.25 Main Sizes & Weight – 1500Lb Bolted cover,swing type disc Threaded or welded seat ring ASTM A216 WCB,A217 WC6,A351CF8,A351CF8M,A351 CF3,A351 CF3M,A351 CN7M.


SIZE Inch 2 2.5 3 4 5 6 8 10 12 L-RF MM 368 419 470 546 - 705 832 991 1130

L1-BW MM 368 419 470 546 - 705 832 991 1130 L2-RTJ MM 371 422 473 549 - 771 841 1000 1146

H MM 296 300 341 412 - 511 680 756 857 RF MM 70 100 150 245 - 550 1010 1550 2280 BW MM 70 100 150 245 - 550 1010 1550 2280

WT

RTJ MM 70 100 150 245 - 550 1010 1550 2280



ANSI CL 2500Lbs Cast Steel and Stainless Steel Swing Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS 1868. Body & Bolted Cover,Swing Type Disc. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request · Special NACE MR-01-75 Butt welded end: ANSIB16.25 Main Sizes & Weight – 2500Lb Bolted cover,swing type disc Threaded or welded seat ring ASTM A216 WCB,A217 WC6,A351CF8,A351CF8M,A351 CF3,A351 CF3M,A351 CN7M.


SIZE Inch 2 2.5 3 4 5 6 8 10 12 L-RF MM 451 508 578 673 - 914 1022 1270 1422

L1-BW MM 451 508 578 673 - 914 1022 1270 1422 L2-RTJ MM 454 514 584 683 - 927 1038 1292 1445

H MM 415 419 441 479 - 511 711 851 1000 RF KG 145 240 330 650 - 1400 2420 3750 5500 BW KG 145 240 330 650 - 1400 2420 3750 5500

WT

RTJ KG 145 240 330 650 - 1400 2420 3750 5500 Remarks:1. Larges sizes available 2. Relative products



ANSI CL 150~2500Lbs Cast Steel and Stainless Steel

Tilting Check Valve

General description Tilting disc check valve is a new check valve produced by our company referring to the foreign advanced products.Its main advantages are to overcome the bump,water hammer of swing check valve and lift check valve under the work condition to achieve smooth operation. Design code Design conform to ASME B16.34 Structural dimension：ASME B16.10 Flange dimension：ASME B16.5 GB HG SH Check and test：API 598 Pressure class：Class 150、300、600、900、1500 、2500、PN 2.0 、5.0、10.0 MPa Structural features While closing, the seat ring can get in touch with the sealing face gradually. then the double-eccentric center disc can work well without bump and noise. Flexible metal seat is of good seal performace. The disc with butterfly form has a long cycle life with quick open and close. The tilting type makes flow passage streamlined to reduce the flow resistance and save the energy.

Material of main parts： Code Body Disc Sealig plate

P CF8 CF8+STL 0Cr19Ni9 PTFE

R CF8M CF8M+STL 0Cr17Ni12Mo2 PTFE

K CF3 CF3+STL 00Cr19Ni11 PTFE

J CF3M CF3M+STL 00Cr17Ni14Mo2 PTFE

E CN7M CN7M+STL NO.20 alloy PTFE

C WCB WCB+13Cr 0Cr19Ni9 PTFE

D LCB CF8+STL 0Cr19Ni9 PTFE

Compare with swing check valve and lift check valve： Performance Swing check valve Tilting disc check valve Lock up Large Little（about 1/5～1/8 of the former one） Bump Large 0 Sealing Conform to API 598, leakage no leakage Flow resistance Large（coefficient ξ=1.3～2.5） Little（coefficient ξ=0.18～0.6） Flow capacity Little(coefficient Cv=76) Large(coefficient Cv=154～333) Weight Large Little（about 80% of the former one）




Tilting Check Valve

Class 150Lb structural dimension & Unit Wt ( Kgs ) NPS 2 2 ? 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32

Specification

DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800

L 203 216 241 292 356 495 622 698 787 864 978 978 1295 1295 1143 1143 1194

D 160 182 196 230 300 390 432 510 540 635 700 770 900 930 991 1020 1150

W 178 198 224 252 326 426 456 530 576 670 740 818 948 988 1050 1090 1240

Weight (kg) 11 16 22 34 62 112 169 238 337 420 550 685 910 1055 1260 1540 1860

Class 300Lb structural dimension & Unit Wt ( Kgs )

NPS 2 2 ? 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 Specification

DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 800

L 267 292 318 356 444 533 622 711 838 864 978 1016 1346 1346 1295 1372 1448

D 170 196 214 245 320 400 460 540 580 660 725 800 940 970 1040 1080 1210

W 198 220 232 268 360 426 457 572 620 690 760 848 988 1018 1250 1280 1350

Weight (kg) 17 22 32 97 110 162 228 380 443 530 780 980 1320 1364 1762 2050 2870


NPS Specification

DN 50 65 80 100 150 200 250 300 350 400 450 500 600 - - - -



L 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 - - - -

D 185 196 210 270 340 440 520 570 610 690 755 850 990 - - - -

W 212 225 240 298 405 460 492 602 650 710 780 902 1040 - - - -

Weight (kg) 27 44 47 115 190 320 430 586 750 1015 1480 2050 2550 - - - -


NPS 2 2 ? 3 4 6 8 10 12 14 16 18 20 24 - - - - Specification

DN 50 65 80 100 150 200 250 300 350 400 450 500 600 - - - -

L - - - -

D - - - -

W - - - -

Weight (kg) - - - -



DN 50 65 80 100 150 200 250 300 350 400 450 500 600 - - - -

L - - - -

D - - - -

W - - - -

Weight (kg) - - - -

Class 2500 structural dimension & Unit Wt ( Kgs )


DN 50 65 80 100 150 200 250 300 350 400 450 500 600 - - - -

L - - - -

D - - - -

W - - - -

Weight (kg) - - - - Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass,





Pressure Seal Gate Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1414 · Face To Face : ASTM/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Butt Welded End: ANSI B16.25(ASME B16.15) · Pressure-Temp: ASTM/ANSI B16.34 · Inspection Test: API 598 · Special NACE MR-01-75 · Body Material: A216-WCB/WCC, A351-CF8, A351-CF8M, A351-CF3,A351-CF3M · size:2”-36” Main Size And Weight-900LB~2500LB





ANSI CL 600~2500Lbs Pressure Seal Gate Valve Materials & Specifications

Pressure sealing Bonnet,Threaded or welded seating Body Material: A216 WCB,A217 WC6,A351CF8,A351CF8M,

A351 CF3,A351 CF3M,A351 CN7M Standards Compliance

Design and Manufacture: API 600,API 6D,ANSI B16.34,ASME B16.34,BS1414 Face to face(end to end): ANSI B16.10 Flanged connection: ANSI B16.5 Butt welded end: ANSI B16.25 Test and inspection: API598. Special NACE MR-01-75 A.Back up ring: Absorbs thrust applied by internal pressure B.Thrust ring: Protects the soft metallic gasket from deformation C.Gasket: Unique angular design provides superior sealing

24 Grease nipple Brass 16 Gland flange Carbon steel~stainless steel 23 Grub screw Carbon steel 15 Gland Stain less steel 22 Hand wheel nut Carbon steel 14 Gland bush Carbon steel~stainless steel 21 Hand wheel Malleable lron/cast steel ducile lron 13 Back seat Stainless steel 20 Yoke nut Carbon steel/stainless steel 12 Disc nut CS+SS/SS/SS+STL 19 Eye bolt and nut A 193 B7/A194 2H~A193 B8/A194 8 11 Stem Stainless steel 18 Pin Carbon steel/stainless steel 10 Seat ring CS+SS/SS/SS+STL(See body material) 17 Stem nut A 439-D2/cu-alloy 09 disc CS+SS/SS/SS+STL(See body material)

Main Part Material

NO. Part name WCB LCB WC6 WC9 08 Stud and nut A193 Gr B7/A194

Gr 2H A193 Gr B7/A194

Gr 4 A193 Gr B16/A194

Gr 4/7 A193 Gr B16/A194

Gr 4/7 07 Gland packing Graphite Graphite Graphite Graphite 06 Gasket Soft lron Soft lron Ss304 Ss304 05 Thrust ring A105 A182 F304 A182 F11 A182 F22 04 Back up ring A105 A182 F304 A182 F11 A182 F22 03 Yoke A216 Gr WCB A352 Gr LCB A271 Gr WC6 A271 Gr WC9 02 Bonnet A216 Gr WCB A352 Gr LCB A271 Gr WC6 A271 Gr WC9 01 Body A216 Gr WCB A352 Gr LCB A271 Gr WC6 A271 Gr WC9

NO. Part name C5 C12 CF8 CF8M

08 Stud and nut A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B7/A194 Gr 2H

A193 Gr B7/A194 Gr 2H

07 Gland packing Graphite Graphite Graphite Graphite 06 Gasket Ss304 Ss304 Ss304 Ss316 05 Thrust ring A182 F22 A182 F22 A182 F304 A182 F316 04 Back up ring A182 F22 A182 F22 A182 F304 A182 F316 03 Yoke A216 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 02 Bonnet A216 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 01 Body A216 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M





Pressure Seal Gate Valve

ANSI Cl 600 Lbs Dimension & Weight ( Kgs )

Size Inch 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24 L-L1 MM 292 330 356 432 508 559 660 787 838 889 16 18 20 24 L-2 MM 178 216 254 305 381 457 584 711 813 889 991 1092 1194 1397 H MM 525 610 650 775 825 1050 1200 1450 1600 1800 991 1092 1194 1397 W MM 250 250 300 350 400 500 600 600 400~ 450~ 2050 2245 2400 2670

WT KG 35 55 62 105 160 205 400 690 815 1125 450~ 500~ 500~ 550~

ANSI Cl 900 Lbs Dimension & Weight ( Kgs ) Size Inch 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24 L-L1 MM 368 419 381 457 559 610 737 838 965 1029 1130 1219 1321 - L-2 MM 216 254 305 356 432 508 660 787 914 991 1092 1219 1321 - H MM 550 645 670 790 855 1075 1225 1500 1635 1830 2145 2300 2485 - W MM 300 300 300 400 450 300~ 350~ 400~ 400~ 450~ 500~ 500~ 550~ -

WT KG 59 79 115 198 407 725 1091 2161 2161 3197 4409 6063 7937 - WT KG 59 79 115 198 407 725 1091 2161 2161 3197 4409 6063 7937 - WT KG 53 71 103 178 366 652 981 1945 1945 2877 3968 5456 7145 -

ANSI Cl 1500 Lbs Dimension & Weight ( Kgs ) Size Inch 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24

L MM 450 508 578 673 673 914 1022 1270 1422 - - - - - L1 MM 279 330 368 457 - 610 762 914 1041 - - - - - L-2 MM 454 514 683 927 - 1038 1358 1680 1892 - - - - - H MM 570 670 725 850 - 1125 1235 1520 1650 - - - - - W MM 300 300 300~ 300~ 300~ 350~ 350~ 400~ 400~ - - - - -

WT KG 95 110 125 205 256 330 655 1200 2010 - - - - -

ANSI Cl 2500 Lbs Dimension & Weight ( Kgs ) Size Inch 2 2-1/2 3 4 5 6 8 10 12 14 16 18 20 24

L MM 368 419 470 546 794 705 832 981 1130 - - - - - L1 MM 216 254 305 406 - 559 711 864 991 L-2 MM 371 422 473 549 - 711 842 1000 1460 - - - - - H MM 610 776 785 874 970 1025 1358 1588 1892 - - - - - W MM 300 400 400 500 500 600 610 610 610 - - - - -

WT KG 50 92 92 145 295 230 540 1080 1184 - - - - -




Pressure Seal Globe Valve Design & Manufacture standards: API 600,API 6D,ANSI B16.34,ASME B16.34,BS1414 · OS&Y.Rising Stem.Plug type Disc. · Face To Face : ASME/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Butt Welded End: ANSI B16.25(ASME B16.15) · Pressure-Temp: ASME/ANSI B16.34 · Inspection Test: API 598, API 6D · Special NACE MR-01-75

. Anti-friction ball thrust bearing: Reduces friction between mating parts to ensure smooth operation . Grub screw: Secures yoke nut in the bonnet . Grease nipple: Supplies lubricant to the mating parts · Body Material: A216-WCB/WCC,A351-CF8,A351-CF8M,A351-CF3,A351-CF3M,A351CN7M · size:2”-36” · Main Size And Weight-2500LB.



Pressure Seal Globe Valve Materials & Specifications


A351 CF3,A351 CF3M,A351 CN7M Standards Compliance

Design and Manufacture: API 600,API 6D,ANSI B16.34,ASME B16.34,BS1873 Face to face(end to end): ANSI B16.10 Flanged connection: ANSI B16.5 Butt welded end: ANSI B16.25 Test and inspection: API598. Special NACE MR-01-75 A.Back up ring: Absorbs thrust applied by internal pressure B.Thrust ring: Protects the soft metallic gasket from deformation C.Gasket: Unique angular design provides superior sealing


Main Part Material


Gr 2H A193 Gr B7/A194

Gr 4 A193 Gr B16/A194

Gr 4/7 A193 Gr B16/A194




A193 Gr B16/A194 Gr 4/7

A193 Gr B7/A194 Gr 2H

A193 Gr B7/A194 Gr 2H




ANSI CL 600~2500Lbs Cast Steel and Stainless Steel Pressure Seal Globe Valve

Design and Manufacture: API 600,API 6D,ANSI B16.34,ASME B16.34,BS1873 Face to face(end to end): ANSI B16.10 Flanged connection: ANSI B16.5 Butt welded end: ANSI B16.25 Test and inspection: API598. Special NACE MR-01-75 A Pack up ring: Absorbs thrust applied by internal pressure B.Thrust ring: Protects the soft metallic gasket from deformation C.Gasket: Unique angular design provides superior sealing

ANSI CL 600-2500Lb Dimensions & Weight ( Kg )

SIZE Inch 2 2.5 3 4 5 6 8 10 12 L/L1 Mm 292 330 356 432 508 559 660 787 838 L2 Mm 178 216 254 305 381 457 584 711 813 H Mm 510 610 610 725 800 1010 1180 1360 1780 W Mm 250 300 300 350 500 550 600 600 700

RF KG 38 65 105 105 185 230 410 615 895 WT BW KG 38 65 105 105 185 230 410 615 895






Pressure Seal Swing Check Valve Design and Manufacture: API 600, API 6D, ASME 16.34,BS1868. Body & Bolted Cover,Swing Type Disc. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request · Special NACE MR-01-75 Butt welded end: ANSIB16.25 Main Sizes & Weight – 2500Lb Bolted cover,swing type disc Threaded or welded seat ring ASTM A216 WCB,A217 WC6,A351CF8,A351CF8M,A351 CF3,A351 CF3M,A351 CN7M.





Pressure Seal Swing Check Valve Material & Specifications


A351 CF3,A351 CF3M,A351 CN7M Design and Manufacture:

API 600, API 6D, ASME 16.34,BS1868. Body & Bolted Cover,Swing Type Disc. Face to face (end to end): ANSIB16.10,API6D Flanged connection: 2~~24~to ASME B16.5(ANSIB16.5) ~~~~~~~~~~22~,26~~36~to MSS-SP-44 ~~~~~~~~~~to API605 on request · Special NACE MR-01-75 Butt welded end: ANSIB16.25 Main Sizes & Weight – 2500Lb Bolted cover,swing type disc Threaded or welded seat ring ASTM A216 WCB,A217 WC6,A351CF8,A351CF8M,A351 CF3,A351 CF3M,A351 CN7M.

Main Part Material NO. Part name Material

16 Split pin Stainless steel 15 Washer Stainless steel 14 Disc pin CS/SS 13 Hinge pin CS/SS 12 Seat ring CS+SS/SS/SS+STL(see body materials) 11 Disc CS+SS/SS/SS+STL(see body materials)

NO. Part name WCB LCB WC6 WC9 10 Yoke stud&nut A193 Gr B7/A194 Gr

2H A320 Gr L7/A194 Gr

4 A193 Gr B16/A194

Gr 4/7 A193 Gr B16/A194

Gr 4/7

09 Cover stud&nut A193 Gr B7/A194 Gr 2H

A320 Gr L7/A194 Gr 4

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

08 Gasket Soft iron Soft iron SS304 SS304 07 Thurst ring A182 F6a A182 F304 A182 F11 A182 F22 06 Back up ring A182 F6a A182 F304 A182 F11 A182 F22 05 Yoke A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 04 Hinge A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 03 Cover A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 02 Bonnet A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9 01 Body A216 Gr WCB A352 Gr LCB A217 Gr WC6 A217 Gr WC9

NO. Part name C5 C12 CF8 CF8M 10 Yoke stud&nut A193 Gr B16/A194

Gr 4/7 A193 Gr B16/A194

Gr 4/7 A193 Gr B7/A194 Gr

2H A193 Gr B7/A194 Gr

2H

09 Cover stud&nut A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B7/A194 Gr 2H

A193 Gr B7/A194 Gr 2H

08 Gasket SS304 SS304 SS304 SS316 07 Thurst ring A182 F5 A182 F22 A182 F304 A182 F316 06 Back up ring A182 F5 A182 F22 A182 F304 A182 F316 05 Yoke A217 Gr C5 A217 Gr C15 A351 Gr CF8 A351 Gr CF8M 004 Hinge A217 Gr C5 A217 Gr C15 A351 Gr CF8 A351 Gr CF8M 03 Cover A217 Gr C5 A217 Gr C15 A351 Gr CF8 A351 Gr CF8M 02 Bonnet A217 Gr C5 A217 Gr C15 A351 Gr CF8 A351 Gr CF8M 01 Body A216 Gr WCB A217 Gr C15 A351 Gr CF8 A351 Gr CF8M





Pressure Seal Swing Check Valve

ANSI Cl 600 Lbs Dimension & Weight ( Kgs )

ANSI Cl 900 ~2500Lbs Dimension & Weight ( Kgs )




Bellow Seal Gate Valve




ANSI CL ANSI CL 150~600Lbs Cast Steel and Stainless Steel

Bellow Seal Gate Valve

Standards Compliance Design and Manufacture: API 600,API 6D,ASME B16.34,BS1414 Face to face (end to end): ANSI B16.10,API 6D Flanged connection: 2~~24~to ANSI B16.5 Butt welded end: ANSI B16.25 Test and inspection: API 598,API 6D BOLTED LENGTHEN BONNET,Threaded or welded seat ring Full bore,OS&Y,Rising stem,Flexible wedge Pressure relief hole on seat BODY MATERIAL: - ASTM A216 WCB,A357 LCB LC1 CL2 LC4,A351 CF8 CF8M CF3 CF3M,A217 WC1 WC6 WC9 C5 C12. TRIM MATERIAL:- Stainless trim-ASTM A352 LCB,LC1,LC2,LC3,LC4,A351 CF8,A351 CF8M,F51

Materials NO. Part name Materials 24 Bearing GCr 23 Stem Nut A439-D2 22 Grease nipple B62 21 Hand wheel nut A193 B7 20 Yoke Nut A193 B7 19 Hand wheel Ducile iron 18 inner-hexagong-bolt A193 B7 17 Oriented block A105/304 16 Protector A216 WCB 15 Gear equiment Ducile iron

NO. Part name A216 WCB A352 LCB A217 WC9 A217 C5 A351 CF8M A351 CF3M 14 Gland flange A216 WCB A216 WCB A216 WCB A216 WCB A351 CF8 A351 CF8 13 Eye nut A193 B7 A193 L7 A193 B16 A193 B16 A193 B8M A193 B8M 12 Eye bolt A194 2H A194 4 A194 7 A194 7 A194 8M A194 8M 11 Gland A276 410 A276 410 A276 304 A276 304 A276 316 A276 316

10 Gland packing Flexible graphite+304

Flexible graphite+304

Flexible graphite+304

Flexible graphite+304 PTFE PTFE

9 Bonnet A216 WCB A352 LCB A217 WC9 A217 C5 A351 CF8M A351 CF3M 8 Bonnet bolt A193 B7 A193 L7 A193 B16 A193 B16 A193 B8M A193 B8M 7 Bonnet nut A194 2H A194 4 A194 7 A194 7 A194 8M A194 8M 6 Gasket SS304+graphite SS304+graphite SS304+graphite SS304+graphite SS316+PTFE SS316+PTFE 5 Bellows SS304 SS304 SS304 SS304 SS316 SS316L 4 Stem A182 F6 A182 F304 A182 F304 A182 F304 A182 F316 A182 F316L 3 Wedge A216 WCB A352 LCB A217 WC9 A351 CF8M A182 F316 A182 F316L 2 Seat ring A105 A182 F304 A182 F304 A182 F316 A182 F316L 1 Body A216 WCB A352 LCB A217 WC9 A217 C5 A351 CF8M A351 CF3M




Bellow Seal Gate Valve Standards Compliance Design and Manufacture: API 600,API 6D,ASME B16.34,BS1414 Face to face (end to end): ANSI B16.10,API 6D Flanged connection: 2~~24~to ANSI B16.5 Butt welded end: ANSI B16.25 Test and inspection: API 598,API 6D

Bellow Seal Gate Valve ANSI Cl 150 Lbs Dimension & Weight ( Kgs )

SIZE inch 2 2-1/2 3 4 6 8 10ont 12~nt 14 16 18 20 24 559 610 610 710 762 71

L-RF mm 178 191 203 229 267 292 330 356 381 406 432 457 508 559 610 610 710 762 71 L1-BW mm 216 241 283 305 403 419 457 502 572 610 660 711 813 864 914 914 965 1016 1016 L2-RTJ mm 191 203 216 241 279 305 343 368 394 419 445 470 521 559 610 610 710 762 711

H mm 520 620 670 785 1095 1415 1730 2065 2466 2900 3110 3510 4200 4500 4800 5300 5600 6100 7200 K mm 200 200 250 600 350 350 400 450 500 500 600 750 750 915 915 915 1000 1000 1000

KG 200 250 600 350 350 400 450 500 500 600 750 750 1356 2015 2675 3330 3430 3660 4400 KG 34 36 60 102 154 264 372 540 660 840 972 1356 1330 2100 2640 3180 3540 3900 4220

WT

KG 26 31 48 92 148 240 348 520 610 680 1056 1330 1350 2040 2600 3360 3480 3680 4500


SIZE inch 2 2-1/2 3 4 6 8 10ont 12~nt 14 16 18 20 24 559 610 610 710 762 71



L-RF mm L1-BW mm 216 241 283 305 403 419 457 502 762 838 914 991 1143 1245 1346 1397 1524 1626 1727 L2-RTJ mm 232 257 298 321 419 435 473 518 778 854 930 1010 1165 1270 1372 1422 1553 1654 1756

H mm 624 745 804 942 1314 1698 2076 2478 2960 3480 3732 4210 5040 5400 5700 6360 6720 7320 8600 K mm 200 200 250 300 350 350 400 450 500 500 600 750 750 915 915 915 1000 1000 1000

KG KG 29 53 57 87 174 271 420 695 860 1260 1480 1980 2780 3430 3920 5080 5480 5820 6300

WT KG 24 42 45 65 132 210 342 600 738 1128 1300 1800 2520 3090 3960 4800 5220 5410 5825


SIZE inch 2 2-1/2 3 4 6 8 10ont 12~nt 14 16 18 20 24 559 610 610 710 762 71

L-RF mm L1-BW mm 292 330 356 432 559 660 787 838 889 991 1092 1194 1397 1448 1549 1651 1778 1930 2083 L2-RTJ mm 295 333 359 435 562 664 791 841 892 994 1095 1200 1407 1461 1562 1664 1794 1946 2099

H mm 748 890 965 1130 1575 2040 2491 2800 3552 4176 4460 5051 6050 6480 6840 7600 8060 8780 10320 K mm 200 250 300 350 450 500 600 750 850 850 960 960 1000 1000 1000 1250 1500 1650 1800

KG KG 42 66 86 152 438 533 840 1130 1570 1932 2485 2890 4580 5260 5890 6300 8200 8900 10560

WT KG 38 56 77 124 261 445 685 990 1214 1510 2130 2410 3840 4700 5140 5850 6740 7400 940





Bellow Seal Globe Valve

Standards Compliance Design Standard: API 600, BS1873 Face to tace: ANSI B16.10 Butt-welded as per ANSI B16.25 Flanged ends as per ANSI B16.5 Pressure test: API 598, API 6D, BS5146 Accessories: Gear Actuators,Electric Actuators Floor Colums: By Pass Piping Note: Size above 250 mm dia has Two Piece Bonnet. Optional Stelited Plug & Seat Alternate Bellow Materials: HC-276/Monel-400/Inconel-600

Features: Structure: BB,OS&Y. Body material: ASTM A216 WCB,A357 LCB LC1 CL2 LC4,A351 CF8 CF8M CF3 CF3M,A217 WC1 WC6 WC9 C5 C12. Trim material:- Stainless trim-ASTM A352,LCB,LC1,LC2, LC3,LC4, A351 CF8,A351 CF8M,F51

Testing Pressure ( Hydraulic and Air )

Rating Body ( Hydraulic ) Seat ( Hydraulic ) Seat ( Air ) ANSI Cl 150Lb 32 Kg/cm2 23Kg/cm2 7Kg/cm2 ANSI Cl 300Lb 79Kg/cm2 58Kg/cm2 7Kg/cm2 ANSI Cl 600Lb 190Kg/cm2 115Kg/cm2 7Kg/cm2

Main Parts and Materials




Bellow Seal Globe Valve

ANSI CL 150 Lbs Bellow Seal Globe Valve Dimensions and Unite Net Weight ( Kgs)







CL ANSI CL 150~1500Lbs Cast Steel and Stainless Steel

Parallel Slab Gate Valve Standards Compliance

Design and Manufacture: API 600,API 6D,ASME B16.34,BS1414 Face to face (end to end): ASME B16.10,ANSI B16.10,API 6D Flanged connection: 2~~24~to ASME/ANSI B16.5 Butt welded end: ASME/ANSI B16.25

Pressure Temperature: ASME/ANSI B16.25 Pressure : Cl 150~1500Lbs. Test and inspection: API 598,API 6D

NO. Part Name WCB LCB WC6 WC9 C5 CF8 CF8M CF3 CF3M 1 Body A216 WCB A352 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 2 Seat A105 A350 LF2 A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 3 Pluice Plate A216 WCB A325 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 4 O-Ring NBR/FEP 5 Gage Block A193 B7 A320 B8 6 Stem A182 F6a A182 F304 A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 7 Gasket Flexible Graphite 8 Bolt A193 B7 A320 L7 A193 B16 A193 B8 A194 B8M 9 Nut A194 2H A194 L7 A194 4 A194 8 A194 8M 10 Bonnet A216 WCB A325 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 11 Backseat Bushing A182 F6a A182 F6 A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 12 Clib Talker 13 Separate Link 14 Packing 15 Yoke A216 WCB A325 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M

16 Stem nut A439 D-2~~Cu-Alloy 17 Oil Cup Copper or Carbon steel or Stainless Steel 18 Retaining Nut Carbon Steel or Alloy Steel 19 Handwheel A216 WCB 20 Protector A105N 21 Indicator ASTM A182 F410

22 Seating face overlay ER410/ER316/STL




Class 150 Lbs Parallel Slab Gate Valve

Dimension / unit net weight ( kgs ) In 2 3 4 6 8 10 12 14 16 18 20 24 28 30 36 40

Mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 7 8 9 10-1/2

11-1/2 13 14 15 16 17 18 20 24 26 32 38

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 34-

1/2 38-1/2

H 23 26-3/4 34 45-

3/8 52-3/8

59-1/2

68-5/8 76 82-

7/8 90 98-1/4 113 127-

1/4 136-1/4 157 172

H1 6 8 10 13-1/2

16-1/2

19-1/2

22-3/4

25-1/4

28-3/8

31-3/8

34-1/2

41-1/8

46-7/8 50 59 65-

11/16 D0 10 10 10 14 14 16 18 20 24 24 24 24 24 24 36 36


Dimension / unit net weight ( kgs ) in 2 3 4 6 8 10 12 14 16 18 20 24 28 30 36 40

mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 8-1/2 11-1/8 12 15-

7/8 16-1/2 18 19-

3/4 30 33 36 39 45 53 55 68 -

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 34-

1/2 -

H 23 26-3/4 34 45-

3/8 52-3/8

59-1/2

68-5/8

75-5/8

80-5/8 88 97-

3/4 114-1/8

129-1/8

139-1/8 161 -

H1 6 8 10 13-1/2

16-1/2

19-1/2

22-3/4

25-1/4

28-1/8 31 34-

1/2 41-1/8 47 50-

5/8 59-1/4 -

D0 10 10 10 14 14 16 18 20 24 24 24 24 24 36 36 -



mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 11-1/2 14 17 19-

1/2 23-1/2

26-1/2 30 32-

1/2 35-1/2

38-1/2

41-1/2

48-1/2 55 60 - -

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 - -

H 23-1/4 27 34-

1/4 46-3/8

56-3/8

59-1/2

68-7/8

75-3/8 81 89-

1/4 98-1/8

115-1/2 130 141 - -

H1 6 8 10 13-5/8

16-1/2

19-3/4 23 26 28-

3/4 31-1/2 35 41-

7/8 51-1/2 60 - -

D0 10 10 10 14 14 16 18 20 24 24 24 24 36 36 - -



mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 11-1/2 14 17 22 26 31 33 35 39 43 47 55 61 65 - -

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 - -

H 23-1/4 27 31-

1/4 45-3/8

56-3/8

59-1/2

68-7/8

75-3/8

83-1/2

91-1/2

100-1/2 118 134 142-

2/4 - -

H1 6 8 10 13-5/8

16-3/4 20 23-

1/4 26 29-1/8

32-3/8

35-7/8

42-1/4

49-1/4

52-3/4 - -

D0 10 10 10 14 14 16 18 20 24 24 24 36 36 36 - -





mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 11-1/2 14 17 24 29 33 38 40-

1/2 44-1/4 48 52 - - - - -

d 2 3 4 6 8 10 12 12-3/4

15-1/4

17-1/4

19-1/4 - - - - -

H 23-1/4 27 34-

1/4 45-1/8

56-1/8

59-1/2

77-1/4

79-5/8

87-3/8

96-15/16

103-3/8 - - - - -

H1 6 8 10 13-7/8

17-1/8

20-1/2

233-3/4

25-9/16

307-1/6

33-7/8

37-1/4 - - - - -

D0 10 10 10 16 16 18 20 24 24 24 36 - - - - - Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass,

Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. * ANSI Cl 2500Lb Parallel Slab Gate Valve also available.




Plate Gate Valve Standards Compliance

Design and Manufacture: API 600,API 6D,ASME B16.34,BS1414 Face to face (end to end): ASME B16.10,ANSI B16.10,API 6D Flanged connection: 2~~24~to ASME/ANSI B16.5 Butt welded end: ASME/ANSI B16.25

Pressure Temperature: ASME/ANSI B16.25 Pressure : Cl 150~1500Lbs. Test and inspection: API 598,API 6D

NO. Part Name WCB LCB WC6 WC9 C5 CF8 CF8M CF3 CF3M 1 Body A216 WCB A352 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 2 Seat A105 A350 LF2 A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 3 Pluice Plate A216 WCB A325 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 4 O-Ring NBR/FEP 5 Gage Block A193 B7 A320 B8 6 Stem A182 F6a A182 F304 A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 7 Gasket Flexible Graphite 8 Bolt A193 B7 A320 L7 A193 B16 A193 B8 A194 B8M 9 Nut A194 2H A194 L7 A194 4 A194 8 A194 8M 10 Bonnet A216 WCB A325 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M 11 Backseat Bushing A182 F6a A182 F6 A182 F304 A182 F304 A182 F304 A182 F304 A182 F316 A182 F304L A182 F316L 12 Clib Talker 13 Separate Link 14 Packing 15 Yoke A216 WCB A325 LCB A217 WC6 A217 WC9 A217 C5 A351 CF8 A351 CF8M A351 CF3 A351 CF3M

16 Stem nut A439 D-2~~Cu-Alloy 17 Oil Cup Copper or Carbon steel or Stainless Steel 18 Retaining Nut Carbon Steel or Alloy Steel 19 Handwheel A216 WCB 20 Protector A105N 21 Indicator ASTM A182 F410

22 Seating face overlay ER410/ER316/STL




Class 150 Lbs Plate Gate Valve

Dimension / unit net weight ( kgs ) In 2 3 4 6 8 10 12 14 16 18 20 24 28 30 36 40

Mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 7 8 9 10-1/2

11-1/2 13 14 15 16 17 18 20 24 26 32 38

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 34-

1/2 38-1/2

H 23 26-3/4 34 45-

3/8 52-3/8

59-1/2

68-5/8 76 82-

7/8 90 98-1/4 113 127-

1/4 136-1/4 157 172

H1 6 8 10 13-1/2

16-1/2

19-1/2

22-3/4

25-1/4

28-3/8

31-3/8

34-1/2

41-1/8

46-7/8 50 59 65-

11/16 D0 10 10 10 14 14 16 18 20 24 24 24 24 24 24 36 36



mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 8-1/2 11-1/8 12 15-

7/8 16-1/2 18 19-

3/4 30 33 36 39 45 53 55 68 -

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 34-

1/2 -

H 23 26-3/4 34 45-

3/8 52-3/8

59-1/2

68-5/8

75-5/8

80-5/8 88 97-

3/4 114-1/8

129-1/8

139-1/8 161 -

H1 6 8 10 13-1/2

16-1/2

19-1/2

22-3/4

25-1/4

28-1/8 31 34-

1/2 41-1/8 47 50-

5/8 59-1/4 -

D0 10 10 10 14 14 16 18 20 24 24 24 24 24 36 36 -



mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 11-1/2 14 17 19-

1/2 23-1/2

26-1/2 30 32-

1/2 35-1/2

38-1/2

41-1/2

48-1/2 55 60 - -

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 - -

H 23-1/4 27 34-

1/4 46-3/8

56-3/8

59-1/2

68-7/8

75-3/8 81 89-

1/4 98-1/8

115-1/2 130 141 - -

H1 6 8 10 13-5/8

16-1/2

19-3/4 23 26 28-

3/4 31-1/2 35 41-

7/8 51-1/2 60 - -

D0 10 10 10 14 14 16 18 20 24 24 24 24 36 36 - -



mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 11-1/2 14 17 22 26 31 33 35 39 43 47 55 61 65 - -

d 2 3 4 6 8 10 12 13-1/4

15-1/4

17-1/4

19-1/4

23-1/4 27 29 - -

H 23-1/4 27 31-

1/4 45-3/8

56-3/8

59-1/2

68-7/8

75-3/8

83-1/2

91-1/2

100-1/2 118 134 142-

2/4 - -

H1 6 8 10 13-5/8

16-3/4 20 23-

1/4 26 29-1/8

32-3/8

35-7/8

42-1/4

49-1/4

52-3/4 - -

D0 10 10 10 14 14 16 18 20 24 24 24 36 36 36 - -





mm 50 80 100 150 200 250 300 350 400 450 500 600 700 750 900 1000

L 11-1/2 14 17 24 29 33 38 40-

1/2 44-1/4 48 52 - - - - -

d 2 3 4 6 8 10 12 12-3/4

15-1/4

17-1/4

19-1/4 - - - - -

H 23-1/4 27 34-

1/4 45-1/8

56-1/8

59-1/2

77-1/4

79-5/8

87-3/8

96-15/16

103-3/8 - - - - -

H1 6 8 10 13-7/8

17-1/8

20-1/2

233-3/4

25-9/16

307-1/6

33-7/8

37-1/4 - - - - -

D0 10 10 10 16 16 18 20 24 24 24 36 - - - - - Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass,

Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. * ANSI Cl 2500Lb Plate Gate Valve also available.




Creyogenic Gate Valve Design & Manufacture standards: API600,API6D, ASME B 16.34,BS 1414 · Face To Face : ASTM/ANSI B16.10 · Flange Standards: ANSI B16.5/16.47, BS4504 EN 1092 · Butt Welded End: ANSI B16.25(ASME B16.15) · Pressure-Temp: ASTM/ANSI B16.34 · Inspection Test: API 598 · Special NACE MR-01-75 · Body Material: A216-WCB/WCC, A351-CF8, A351-CF8M, A351-CF3,A351-CF3M · size:2”-36” Main Size And Weight-900LB~2500LB




ANSI CL 150~600Lbs Creyogenic Gate Valve

Materials & Specifications

Pressure sealing Bonnet,Threaded or welded seating Standards Compliance

Design and Manufacture: ANSI B16.34,BS1414 Face to face(end to end): ANSI B16.10 Flanged connection: ANSI B16.5 Butt welded end: ANSI B16.25 Test and inspection: API598. Special NACE MR-01-75 A.Back up ring: Absorbs thrust applied by internal pressure B.Thrust ring: Protects the soft metallic gasket from deformation C.Gasket: Unique angular design provides superior sealing


Main Part Material


Gr 2H A193 Gr B7/A194

Gr 4 A193 Gr B16/A194

Gr 4/7 A193 Gr B16/A194




A193 Gr B16/A194 Gr 4/7

A193 Gr B7/A194 Gr 2H

A193 Gr B7/A194 Gr 2H







Creyogenic Gate Valve

ANSI CL 150 lbs – 2”~16” Dimensions & Weight ( Kgs )

Size Inch 2 2-1/2 3 4 6 8 10 ?ont> 12~nt> 14 16 L-RF Mm 178 191 203 229 267 292 330 356 381 406

L1-BW Mm 216 241 283 305 403 419 457 502 572 610 L2-RTJ Mm 191 203 216 241 279 305 343 368 394 419

H Mm 540 610 690 780 980 1180 1390 1620 1810 1970 K Mm 200 200 250 600 350 350 400 450 500 500

RF Kgs 23 33 40 54 91 132 240 360 45 589 BW Kgs 19 29 37 48 85 126 210 340 465 509

Wt

RTJ Kgs 24 35 43 57 94 135 205 389 500 593

ANSI CL 150 lbs – 18” ~36” Dimensions & Weight ( Kgs ) Size Inch 18 20 24 26 28 30 32 34 36 40 L-RF Mm 432 457 508 559 610 610 710 762 71 -

L1-BW Mm 660 711 813 864 914 914 965 1016 1016 - L2-RTJ Mm 445 470 521 559 610 610 710 762 711 -

H Mm 2410 2410 3210 3600 3880 4000 4320 4310 5100 - K Mm 600 750 750 915 915 915 1000 1000 1000 -



RF 630 780 1240 1920 2432 2980 3161 3450 3980 3980 - BW 580 740 1130 1720 1810 2670 2870 3250 3370 3370 -

Wt

RTJ 645 790 1260 1950 2470 3000 3200 3487 4000 4000 -

ANSI CL 300 lbs – 2” ~16” Dimensions & Weight ( Kgs ) Size inch 2 2-1/2 3 4 6 8 10 12 14 16 L-RF

L1-BW mm 216 241 283 305 403 419 457 502 762 838

L2-RTJ mm 232 257 298 321 419 435 473 518 778 854 H mm 540 630 690 780 980 1080 1390 1020 1810 1970 K mm 200 200 250 300 350 350 400 450 500 500

RF BW Kgs 27 49 53 80 152 245 380 610 758 1100

Wt RTJ Kgs 24 41 45 64 120 194 310 560 710 980

ANSI Std CL 300 lbs – 18” ~ 36” Dimensions & Weight ( Kgs ) Size Inch 18 20 24 26 28 30 32 34 36 40 L-RF

L1-BW Mm 914 991 1143 1245 1346 1397 1524 1626 1727 994

L2-RTJ Mm 930 1010 1165 1270 1372 1422 1553 1654 1756 - H Mm 2410 2820 3200 3700 4320 4510 4600 4400 5100 - K Mm 600 750 750 915 915 915 1000 1000 1000 -

RF BW Kgs 1240 1700 2380 2930 3475 4310 5100 4930 5240 -

Wt RTJ Kgs 1000 1550 2120 2680 3100 4100 4610 4810 5000 -

ANSI CL 600 lbs – 2” ~16” Dimensions & Weight ( Kgs ) Size inch 2 2-1/2 3 4 6 8 10 12 14 16 L-RF

L1-BW mm 292 330 356 432 559 660 787 838 889 991

L2-RTJ mm 295 333 359 435 562 664 791 841 892 994 H mm 560 680 710 870 1020 1210 1420 1680 1910 2030 K mm 200 250 300 350 450 500 600 750 850 850

RF BW Kgs 39 60 78 132 372 464 730 970 1360 1695

Wt RTJ Kgs 36 54 61 110 320 434 690 930 1280 1510

ANSI CL 600 lbs – 18” ~ 36” Dimensions & Weight ( Kgs ) Size Inch 18 20 24 26 28 30 32 34 36 40 L-RF

L1-BW Mm 1092 1194 1397 1448 1549 1651 1778 1930 2083 -

L2-RTJ Mm 1095 1200 1407 1461 1562 1664 1794 1946 2099 - H Mm 2530 3100 3420 3700 3980 4200 4520 4530 5320 - K Mm 960 960 1000 1000 1250 1250 1500 1650 1800 -

RF BW Kgs 2109 2610 3910 4450 5050 5340 6920 7520 8910 -

Wt RTJ Kgs 1930 2210 3540 4000 4510 4830 6400 7000 8000 -


Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. • ANSI Cl 900~2500Lb Creyogenic Gate Valve also available.



CL 150 LBS RF ANGLE PATTERN GLOBE VALVE & SDNR ANGLE GLOBE VALVE

( API TRIM 5 or TRIM 8 ) Cast steel valves are available with a wide range of trim materials. Those which are most Commonly used ae shown in the table below. For availability of trims not shown,please

contact Lanus or you local distributor.




( API TRIM 5 or TRIM 8 ) FEATURES OPTIONS STANDARDS

SEAL: WELDED SEAT BOSSES for taps & bypass Graphite Packing Fugitive emission tested

ALTERNATE TRIMS NACE MR-01-75 MOUNTING PADS for ACTUATION STOP CHECK DESIGN

DESIGN: ANSI B16.34 Face-Face ANSI B16.10 Flange dim.s: ANSI B16.5 API6D,API600 Wall Testing: API 598

CL 150LBS DIMENSIONS N WT (KG )



































ANSI CL 125Lb,CL 250Lb,CL 150Lb~CL 1500Lb Cast Iron,Ductile Iron,Cast Steel,Alloy Steel

Y-Strainers Design & Manufactured Standard Design: API 594/API6D Shall wall thickness : ASME/ANSI B16.34 Face to Face: ASME/ANSI B16.10 Flange dimensions: ASME/ANSI B16.5 Butt Welding Ends Connection: ASME/ANSI B16.25 Pressure Temperature Rating: ASME/ANSI B16.34 Pressure Testing: API 6D/API 598/Din 3230. Shall : 2.1MPa ( Water), Seat: 300psi ( Water )

Design Description Y-Pattern Body:,Cover,Plug-High Tensile ASTM A536 Cl 65-45-12. Perforated Stainless Steel Screen Flange ends, Butt Ends & Screw Ends : BSPT & NPT.

Operating Pressures and Temperatures

Type Size PSI @ Temp Steam*

PSI @ Temp WOG

LIF125 2" - 12" 125 344 °F 200 150°F 14" - 20" 100 328 °F 150 150°F

LIF250 2" - 12" 250 450 °F 500 150°F

Standard Screens Model Size Std. Opening

YCI125 2" - 3" 3/64" perf 0.045" 4" - 20" 1/8" perf 0.125"

YDI250 2" - 4 " 1/16" perf 0.062" 5" - 12" 1/8" perf 0.125"

NO. Part name Cast Iron Ductile Iron WCB LCB WC6

06 Stud and nut A193 Gr B7/A194 Gr 2H

A320 Gr L7/A194 Gr 4

A193 Gr B7/A194 Gr 2H

A320 Gr L7/A194 Gr 4

A193 Gr B16/A194 Gr 4/7

05 Gland Packing Graphite Graphite Graphite Graphite Graphite

04 Gasket Spiral wound/Soft lron

Spiral wound/Soft lron



Spiral wound/SS304

02 Cover ASTM A126 Cl. B ASTM A395 or ASTM A536 A216 Gr WCB A352 Gr LCB A271 Gr WC6

01 Body ASTM A126 Cl. B ASTM A395 or ASTM A536 A216 Gr WCB A352 Gr LCB A271 Gr WC6

NO. Part name WC9 C5 C12 CF8 CF8M


A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B16/A194 Gr 4/7

A193 Gr B7/A194 Gr 2H

05 Gland Packing Graphite Graphite Graphite PTFE PTFE

04 Gasket Spiral wound/SS304



Spiral wound/SS304

Spiral wound/SS316

02 Cover A271 Gr WC9 A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M 01 Body A271 Gr WC9 A217 Gr C5 A217 Gr C12 A351 Gr CF8 A351 Gr CF8M

Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. and larges sizes also available depend of order quanty..



ANSI CL 125Lb,CL 250Lb Cast Iron,Ductile Iron

Y-Strainers Standard Screens Design & Manufactured Standard Design Description

Model Size Std. Opening Design: API 594/API6D Y-Pattern YCI125 2" - 3" 3/64" perf 0.045" Shall wall thickness : ASME/ANSI B16.34 Body:,Cover,Plug 4" - 20" 1/8" perf 0.125" Face to Face: ASME/ANSI B16.10 Cast Steel : A216-WCB/WCC YDI250 2" - 4 " 1/16" perf 0.062" 5" - 12" 1/8" perf 0.125" Flange dimensions: ASME/ANSI B16.5 Size 4" and above, Y Strainer, Cast Stainless Steel, 150#

ANSI Flanges with 1/8" Perfix SS304 or SS316 Screen Butt Welding Ends Connection: ASME/ANSI B16.25

Stainless Steeel: A351-CF8, A351-CF8M,A351-CF3,A351-CF3M

MODEL Size PSI @ Temp Steam*

PSI @Temp WOG

Pressure Temperature Rating: ASME/ANSI B16.34 Flange ends,RF or RTJ LIF125 2" - 12" 125 344 °F 200 150°F Pressure Testing: API 6D/API 598/Din 3230. Butt Ends : Sch40 & Sch80

Screw Ends : BSPT & NPT. 14" - 20" 100 328 °F 150 150°F

LIF250 2" - 12" 250 450 °F 500 150°F Shall : 2.1MPa ( Water), Seat: 300psi ( Water )

Dimensions and Unit Weight

Size Size A

( C.Iron) H

( D.Iron) A

(C.Iron) H

(D.Iron) Blow Off NPT/

BSPT Weight (Kgs)

Weight (Kgs)

Inches Prefix YCI125 YDI250 YCI125 YDI250 YCI125 YDI250 YCI125 YDI250 1.1/2 0200 6.1/2 5 6.1/2 5 1/2 1/2 7 8

2 0200 7 7/8 8 5/8 7 7 /18 1/2 1/2 10 16 2 1/2 0250 10 10 5/8 9 3/4 8 7/8 1 1 15 25

3 0300 10 1/8 12 10 9 7/8 1 1 18 33 4 0400 12 1/8 14 1/2 12 12 1/16 1 1/2 1 1/2 32 52 5 0500 15 5/8 16 3/8 17 16 1/4 2 2 50 79 6 0600 18 1/2 19 5/16 20 19 3/8 2 2 70 93 8 0800 21 5/8 23 3/8 22 3/4 22 3/16 2 2 129 196 10 1000 25 3/4 27 3/8 28 27 3/8 2 2 194 300 12 1200 29 7/8 32 30 29 1/4 2 2 303 444 14 1400 33 1/4 - 36 1/2 - 2 - 450 - 16 1600 38 3/4 - 42 - 2 - 720 - 18 1800 43 1/8 - 45 1/2 - 2 - 1185 - 20 2000 49 1/2 - 54 - 2 - 1320 -

Manufacturer reserves the right to modify dimensions, materials, or design. Contact factory for certification. *Must specify if for steam service*. Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. and larges sizes also available depend of order quanty..



ANSI CL 15O~1500Lb Cast Steel,Stainless Steel and Alloy Steel

Y-Strainers Design & Manufactured Standard Design Description Size Std. Opening Design: API 594/API6D Y-Pattern 1/2" - 1 1/2" 1/32" perf 0.032" Shall wall thickness : ASME/ANSI B16.34 Body:,Cover,Plug 2" - 3" 3/64" perf 0.045" Face to Face: ASME/ANSI B16.10 Cast Steel : A216-WCB/WCC 4" - 12" 1/8" perf 0.125" Flange dimensions: ASME/ANSI B16.5 Size 4" and above, Y Strainer, Cast Stainless Steel, 150#

ANSI Flanges with 1/8" Perfix SS304 or SS316 Screen Butt Welding Ends Connection: ASME/ANSI B16.25



PSI @Temp WOG

Pressure Temperature Rating: ASME/ANSI B16.34 Flange ends,RF or RTJ CS150SS 1/2"- 12" 150 358°F 225 150°F Pressure Testing: API 6D/API 598/Din 3230. Butt Ends : Sch40 & Sch80

Screw Ends : BSPT & NPT. SS150CF8 1/2"- 12" 150 358°F 285 100°F

Shall : 28.5Bar( Water), Seat: 20.9Bar ( Water )

SS150CF8M 1/2"- 12" 150 358°F 275 100°F


SIZE

INCHES PREFIX A H BLOW OFF

NPT/BSPT UNIT WT

KGS ½ 0050 6 2 9/16 Opt. 5 ¾ 0075 7 1/2 3 Opt. 6 1 0100 7 3/8 3 3/8 Opt. 7

1 ½ 0150 7 1/4 4 3/4 Opt. 9 2 0200 8 5/8 4 7/8 1/2 14

2 ½ 0250 10 1/4 7 1/2 3/4 20 3 0300 11 5/8 7 3/4 1 28 4 0400 14 3/8 9 1/8 1 1/2 44 5 0500 17 5/8 11 2 69 6 0600 18 5/8 13 3/8 2 80 8 0800 24 3/8 14 5/8 2 120 10 1000 26 17 1/4 2 190 12 1200 30 3/8 21 2 280

Manufacturer reserves the right to modify dimensions, materials, or design. Contact factory for certification. *Must specify if for steam service*. Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. and larges sizes also available depend of order quanty..



ANSI CL 300Lb Cast Steel,Stainless Steel and Alloy Steel

Y-Strainers Design & Manufactured Standard Design Description Size Std. Opening Design: API 594/API6D Y-Pattern 1/2" - 1 1/2" 1/32" perf 0.032" Shall wall thickness : ASME/ANSI B16.34 Body:,Cover,Plug 2" - 3" 3/64" perf 0.045" Face to Face: ASME/ANSI B16.10 Cast Steel : A216-WCB/WCC 4" - 12" 1/8" perf 0.125" Flange dimensions: ASME/ANSI B16.5 Size 4" and above, Y Strainer, Cast Stainless Steel, 300# ANSI

Flanges with 1/8" Perfix SS304 or SS316 Screen Butt Welding Ends Connection: ASME/ANSI B16.25



PSI @ Temp WOG

Pressure Temperature Rating: ASME/ANSI B16.34

Flange ends,RF or RTJ CS300SS 1" - 12" 300psi 417°F 740psi 100°F

Pressure Testing: API 6D/API 598/Din 3230.

Butt Ends – Sch40,800 Screw Ends : BSPT & NPT.

SS300CF8 1" - 12" 300psi 417°F 720psi 100°F

Shall : 75Bar(Water) Seat:55Bar(Water )

SS300CF8M 1" - 12" 300psi 417°F 720psi 100°F


SIZE

INCHES PREFIX A H BLOW OFF

NPT/BSPT UNIT WT

KGS ½ 0100H 7 13/16 3 5/8 3/ 8 24

¾ 0150 7 9/16 4 3/8 3/ 8 27

1 0200 9 3/4 6 1/8 1/2 47

1 ½ 0200H 9 3/4 6 1/8 1/2 50

2 0250 10 11/16 7 7/16 1 64

2 ½ 0300 12 9/16 9 1 1/4 87

3 0300H 13 1/2 7 3/4 1 1/4 94

4 0400 14 5/8 11 1 1/2 165

5 0400H 16 5/8 10 3/4 1 1/2 170

6 0500 18 1/2 15 3/8 2 186

8 0600 19 3/4 15 1/2 2 260

10 0800 25 16 1/4 2 385

12 1000 29 1/8 19 1/4 2 610

Manufacturer reserves the right to modify dimensions, materials, or design. Contact factory for certification. *Must specify if for steam service*. Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. and larges sizes also available depend of order quantity..




Y-Strainers Design & Manufactured Standard Design Description Size Std. Opening Design: API 594/API6D Y-Pattern 2" - 3" 3/64" perf 0.045" Shall wall thickness : ASME/ANSI B16.34 Body:,Cover,Plug 4" - 12 " 1/8" perf 0.125" Face to Face: ASME/ANSI B16.10 Cast Steel : A216-WCB/WCC 4" - 12" 1/8" perf 0.125" Flange dimensions: ASME/ANSI B16.5 Size 4" and above, Y Strainer, Cast Stainless Steel, 600# ANSI




PSI @ Temp WOG


Flange ends,RF or RTJ CS600SS 2" - 12" 600 486°F 1480 100°F


Butt Ends & Screw Ends : BSPT & NPT.

SS600CF8 2" - 12" 600 486°F 1440 100°F

Shall: 149Bar(Water). Seat: 108Bar(Water)

SS600CF8M 2" - 12" 600 486°F 1440 100°F


SIZE

INCHES PREFIX A

(Inch) H

(Inch) BLOW OFF NPT/BSPT

(Inch)

UNIT WT KGS

2 0200 11 6 1/8 1/2 25 2 1/2 0250 12 7 1/4 1 36

3 0300 13 1/2 8 1 1/4 46 4 0400 17 15/16 9 3/8 1 1/2 98 5 0500 22 1/4 12 3/8 2 151 6 0600 25 5/8 17 1/4 2 187 8 0800 31 3/4 18 1/2 2 380 10 1000 37 11/16 21 5/8 2 548 12 1200 41 7/8 26 3/4 2 660

Manufacturer reserves the right to modify dimensions, materials, or design. Contact factory for certification. *Must specify if for steam service*. Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,. and larges sizes also available depend of order quantity..




Y-Strainers Design & Manufactured Standard Design Description Size Std. Opening Design: API 594/API6D Y-Pattern Size Std. Opening Shall wall thickness : ASME/ANSI B16.34 Body:,Cover,Plug 2" - 3" 3/64" perf 0.045" Face to Face: ASME/ANSI B16.10 Cast Steel : A216-WCB/WCC 4" - 8 " 1/8" perf 0.125" Flange dimensions: ASME/ANSI B16.5 Size 4" and above, Y Strainer, Cast Stainless Steel, 600# ANSI



MODEL Size PSI@TempSteam PSI@Temp WOG


Flange ends,RF or RTJ CS900SS 2" - 8 " 900psi532°F 2205psi100°F



SS900 CF8

2" - 8 " 900psi532°F 2160psi100°F

Shall:149Bar(Water), Seat: 163Bar(Water)

SS9000 CF8M

2" - 8 " 900psi532°F 2250psi100°F


SIZE

INCHES PREFIX A

(Inch) H


(Inch)

UNIT WT KGS

3 0300 19 13 3/8 15 3/8 89 4 0400 22 1/2 16 3/8 18 3/8 165 6 0600 28 19 15/16 21 15/16 327 8 0800 35 24 11/16 26 11/16 655

10” - - - - - 12” - - - - -

Manufacturer reserves the right to modify dimensions, materials, or design. Contact factory for certification. *Must specify if for steam service*. Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,.and larges sizes also available depend of order quanty..




Y-Strainers Design & Manufactured Standard Design Description Size Std. Opening Design: API 594/API6D Y-Pattern Size Std. Opening Shall wall thickness : ASME/ANSI B16.34 Body:,Cover,Plug 2" - 3" 3/64" perf 0.045" Face to Face: ASME/ANSI B16.10 Cast Steel : A216-WCB/WCC 4" - 8 " 1/8" perf 0.125" Flange dimensions: ASME/ANSI B16.5 Size 4" and above, Y Strainer, Cast Stainless Steel, 600# ANSI



MODEL Size PSI@TempSteam PSI@Temp WOG


Flange ends,RF or RTJ CS1500SS

1500/532°F

2205/100°F 2205psi100°F



SS1500 CF8

1500/532°F

2160/100°F 2160psi100°F

Shall : 372 Bar (Water) Seat: 272Bar ( Water )

SS1500 CF8M

1500/532°F

2250/100°F 2250psi100°F


SIZE

INCHES PREFIX A

(Inch) H


(Inch)

UNIT WT KGS

3 0300 19 13 3/8 15 3/8 90 4 0400 22 1/2 16 3/8 18 3/8 165

6 0600 28 19 15/16 21 15/16 330 8 0800 35 24 11/16 26 11/16 660

10” - - - - - 12” - - - - -

Manufacturer reserves the right to modify dimensions, materials, or design. Contact factory for certification. *Must specify if for steam service*. Other Materials valves also available. Like: Hastelloy B & C, Titanium, Copper Aluminum Bronze, Aluminum Brass, Aluminum Bronze, Titanium, Inconel, Duplex and Supper Duplex etc,.and larges sizes also available depend of order quanty..



ANSI CL 125Lb,CL 250Lb,CL 150Lb~CL 1500Lb Cast Iron,Ductile Iron,Cast Steel,Alloy Steel

Y-Strainers

DESIGN OF STAINLESS STEEEL NAME PALTE O O

Brand LIV Y-Strainer Fig. YCI1250SS316 Size 4” CL 125# Body A126 Gr. C. B

Bolted Cover SS316 Screen 40Mesh SS316 Mfg Lanus Industries LLC ● USA

Yr 2007

O O

Name Plate fixed on edge of Bonnet Flange or Cover Flange or fixed on below Hex Nut of Body & Bonnet Stud Bolt & Nut.

ANSI CL 125# C.I STRAINER ANSI CL 250# D.I STRAINER ANSI CL 600# CS STRAINER

ANSI CL 600# A352 LCB STRAINER

ANSI CL 600# CF8 STRAINER ANSI CL 600# CF8M STRAINER



DIMENSIONS & DESIGN OF STAINLESS STEEL SCREEN

Strainer Screen-The heart of Y strainer The screen, of course, is the heart of the Y Strainer and the point where the dirt or unwanted material is trapped. In the case of small sizes (up to 2 inches), a cylindrical wire mesh screen is generally satisfactory if pressure is not too high. For larger sizes, a simple wire mesh cylinder does not have enough mechanical strength and it should be backed up with a perforated metal cylinder. Stainless steel is the preferred material for Y Strainer screen and is used with almost all Y Strainers regardless of material of construction.



ANSI B16.25

Nominal Pipe Size 3~ 4~ 5~ 6~ 8~ 10~ 12~ 14~ 16~ A-inches 3.59 4.62 5.69 6.78 8.78 10.94 12.97 14.25 16.25

Nominal Pipe Size 18~ 20~ 24~ 26~ 28~ 30~ 32~ 34~ 36~ A-inches 18.28 20.31 24.38 26.38 28.38 30.38 32.50 34.50 36.50

Class 150 and 300 valves 12-inch and smaller are regularly mechined as shown in two upper illustrations.Unless other wise

specified,ends are bored to match schedule 40 pipe in valves 10-inch and smaller and standard wall pipe(0.37~thick) in 12-inch valves.

Orders for Class 150 and 300 butt-welding valves 14-inch and larger.And for Class 400 and higher valves in all sizes,Must specify the inside diameter of the pipe with which the valves will be used,and the type of backing ring required.Ohter types of weld end

preparation can be furnished when specified.

Note: A=Outside Diameter(Cast Steel Valves) B=Nominal Inside Diameter of pipe

C=B+0.25t-0.041~ t=Nominal Pipe Wall Thickness C=B+0.25t-0.041~ 0.09=3/32~0.75=3/4~ 0.12=1/8~0.88=7/8

0.03=1/32~0.16=5/32~0.06=1/16~0.38=3/8



ANSI CLASS 150/300Lb

Note: 1.NPS 24~and smaller by ANSI B16.5,NPS 26 and larger by MSS SP-44.

2.Class 150 and Class 300 flange lowest thickness included 0.06 inch convexity. Flanged ends dimensionsClass 150Lb

NPS DN O B R C Z Stub Bolt Bolt Length inch mm inch mm inch mm inch mm Inch mm inch mm Num Diam. RF R&G

2 50 6.00 150 4.57 120.5 3.62 92 0.75 19.5 0.75 18 4 5/8 3.25 3.75 2-1/2 65 7.00 180 5.50 139.5 4.12 105 0.88 22.5 0.75 18 4 5/8 3.50 4.00

3 80 7.50 190 6.00 152.5 5.00 127 0.94 24 0.75 18 4 5/8 3.50 4.00 4 100 9.00 230 7.50 190.5 6.19 157.5 0.94 24 0.75 18 8 5/8 3.50 4.00 6 150 11.00 280 9.50 241.5 8.50 216 1.00 25.5 0.88 22 8 3/4 4.00 4.50 8 200 13.50 345 11.75 298.5 10.62 270 1.12 29 0.88 22 8 3/4 4.25 4.75 10 250 16.00 405 14.25 362 12.75 324 1.19 30.5 1.00 26 12 7/8 4.50 5.00 12 300 19.00 485 17.00 432 15.00 381 1.25 32 1.00 26 12 7/8 4.75 5.25 14 350 21.00 535 18.75 476 16.25 413 1.38 35 1.12 29.5 12 1 5.25 5.75 16 400 23.50 600 21.25 540 18.50 470 1.44 37 1.12 29.5 16 1 5.25 5.75 18 450 25.00 635 22.75 578 21.00 533.5 1.56 40 1.25 32.5 16 1-1/8 5.75 6.25 20 500 27.50 700 25.00 635 23.00 584 1.69 43 1.25 32.5 20 1-1/8 6.25 6.75 24 550 32.00 815 29.50 749.5 27.25 692 1.88 48 1.38 35.5 20 1-1/4 6.75 7.25 26 600 34.25 870 31.75 806.5 29.50 749 2.69 68 1.38 35.5 24 1-1/4 - - 28 650 36.50 927 34.00 864 31.50 800 2.81 72 1.38 35.5 28 1-1/4 - - 30 700 38.75 985 36.00 915 33.75 857 2.94 75 1.38 35.5 28 1-1/4 - - 32 750 41.75 1060 38.50 978 36.00 915 3.18 81 1.62 41 28 1-1/2 - - 34 800 43.75 1112 40.50 1029 38.00 965 3.25 83 1.62 41 32 1-1/2 - - 36 850 46.00 1168 42.75 1086 40.25 1022 3.44 88 1.62 41 32 1-1/2 - -

Flanged ends dimensions~~~~Class 300Lb

NPS DN O B R C Z Stub Bolt Bolt Length inch mm inch mm inch mm inch mm inch mm inch mm Num Diam. RF R&G

2 50 6.50 165 5.00 127 3.62 92 0.88 22.5 0.75 18 8 5/8 3.50 4.00 2-1/2 65 7.50 190 5.88 149 4.12 105 1.00 25.5 0.88 22 8 3/4 4.00 4.50

3 80 8.25 210 6.62 168.5 5.00 127 1.12 29 0.88 22 8 3/4 4.25 4.75 4 100 10.00 255 7.88 200 6.19 157.5 1.25 32 0.88 22 8 3/4 4.50 5.00 6 150 12.50 320 10.62 270 8.50 216 1.44 37 0.88 22 12 3/4 4.75 5.50 8 200 15.00 380 13.00 330 10.62 270 1.62 41.5 1.00 26 12 7/8 5.50 6.00 10 250 17.50 445 15.25 387.5 12.75 324 1.88 48 1.12 29.5 16 1 6.25 6.75 12 300 20.50 520 17.75 451 15.00 381 2.00 51 1.25 32.5 16 1-1/8 6.75 7.25 14 350 23.00 585 20.25 514.5 16.25 413 2.12 54 1.25 32.5 20 1-1/8 7.00 7.50 16 400 25.50 650 22.50 571.5 18.50 470 2.25 57.5 1.38 32.5 20 1-1/4 7.50 8.00 18 450 28.00 710 24.75 628.5 21.00 533.5 2.38 60.5 1.38 32.5 24 1-1/4 7.75 8.25 20 500 30.50 775 27.00 686 23.00 584 2.50 63.5 1.38 32.5 24 1-1/4 8.00 8.75 24 550 36.00 915 32.00 813 27.25 692 2.75 70 1.62 42 24 1-1/2 90.00 10.0 26 600 38.25 972 34.50 876 29.50 749 3.12 79.5 1.75 44.5 28 1-5/8 - - 28 650 40.75 1035 37.00 940 31.50 800 3.38 86 1.75 44.5 28 1-5/8 - - 30 700 43.00 1092 39.25 997 33.75 857 3.62 92 1.88 48 28 1-3/4 - - 32 750 45.25 1150 41.50 1054 36.00 915 3.88 98.5 2.00 51 28 1-7/8 - - 34 800 47.50 1207 43.50 1105 38.00 965 4.00 102 2.00 51 28 1-7/8 - - 36 850 50.00 1270 46.00 1169 40.25 1022 4.12 105 2.12 54 32 2 - -



ANSI CLASS 600/900Lb

Note: 1.NPS 24~and smaller by ANSI B16.5,NPS 26 and larger by MSS SP-44.

2.Class 600 and Class 900 flange lowest thickness barring 0.25 inch convexity. Flanged ends dimensions~~~~Class 600Lb


2 50 6.50 165 5.00 127 3.62 92 1.00 25.5 0.75 18 8 5/8 4.25 4.25 2-1/2 65 7.50 190 5.88 149 4.12 105 1.12 29 0.88 22 8 3/4 4.75 4.75

3 80 8.25 210 6.62 168.5 5.00 127 1.25 32 0.88 22 8 3/4 5.00 5.00 4 100 10.75 275 8.50 216 6.19 157.5 1.50 38.5 1.00 26 8 7/8 5.75 5.75 6 150 14.00 355 11.50 292 8.50 216 1.88 48 1.12 29.5 12 1 6.75 6.75 8 200 16.50 420 13.75 349 10.62 270 2.19 55.5 1.25 32.5 12 1-1/8 7.50 7.75 10 250 20.00 510 17.00 432 12.75 324 2.50 63.5 1.38 35.5 16 1-1/4 8.50 8.50 12 300 22.00 560 19.25 489 15.00 381 2.62 67 1.38 35.5 20 1-1/4 8.75 8.75 14 350 23.75 605 20.75 527 16.25 413 2.75 70 1.50 39 20 1-3/8 9.25 9.25 16 400 27.00 685 23.75 603 18.50 470 3.00 76.5 1.62 42 20 1-1/2 10.0 10.0 18 450 29.25 745 25.75 654 21.00 533.5 3.25 83 1.75 45 20 1-5/8 11.0 11.0 20 500 32.00 815 28.50 724 23.00 584 3.50 89 1.75 45 24 1-5/8 11.5 11.5 24 550 37.00 940 33.00 838 27.25 692 4.00 102 2.00 51 24 1-7/8 13.0 13.5 26 600 40.00 1016 36.00 915 29.50 749 4.25 108 2.00 51 28 1-7/8 - - 28 650 42.25 1073 38.00 965 31.50 800 4.38 111 2.12 54 28 2 - - 30 700 44.50 1130 40.25 1022 33.75 857 4.50 114 2.12 54 28 2 - - 32 750 47.50 1194 42.50 1080 36.00 915 4.62 117 2.38 61 28 2-1/4 - - 34 800 49.00 1245 44.50 1130 38.00 965 4.77 121 2.38 61 28 2-1/4 - - 36 850 51.75 1315 47.00 1194 40.25 1022 4.88 124 2.62 67 28 2-1/2 - -

Flanged ends dimensions~~~~Class 900Lb


2 50 8.50 215 6.50 165 3.62 92 1.50 38.5 1.00 26 8 7/8 5.75 5.75 2-1/2 65 9.62 245 7.50 190.5 4.12 105 1.62 41.5 1.12 29.5 8 1 6.25 6.25

3 80 9.50 240 7.50 190.5 5.00 127 1.50 38.5 1.00 26 8 7/8 5.75 5.75 4 100 11.50 290 9.25 235 6.19 157.5 1.75 44.5 1.25 32.5 8 1-1/8 6.75 6.75 6 150 15.50 380 12.50 317.5 8.50 216 2.19 56 1.25 32.5 12 1-1/8 7.50 7.50 8 200 18.50 470 15.50 393.5 10.62 270 2.50 63.5 1.50 39 12 1-3/8 8.75 8.75 10 250 21.50 545 18.50 470 12.75 324 2.75 70 1.50 39 16 1-3/8 9.25 9.25 12 300 24.00 610 21.00 533.5 15.00 381 3.12 79.5 1.50 39 20 1-3/8 10.0 10.0 14 350 25.25 640 22.00 559 16.25 413 3.38 86 1.62 42 20 1-1/2 11.0 11.0 16 400 27.75 705 24.25 616 18.50 470 3.50 89 1.75 45 20 1-5/8 11.5 11.5 18 450 31.00 785 27.00 686 21.00 533.5 4.00 102 2.00 51 20 1-7/8 13.0 13.5 20 500 33.75 855 29.50 749.5 23.00 584 4.25 108 2.12 55 20 2 14.0 14.5 24 550 41.00 1040 35.50 901.5 27.25 692 5.50 140 2.62 68 20 1-1/2 17.5 18.0



Flanges Dimensions

ASME ( ANSI CL 150 Lbs )

Y Y2 Y3 B B2 B3 NB

Pipe Size

O

O.D

R

RF Dia

X

Hub Dia

C Thkness

of Flange

Overall length

Norminal Bore Dia | Inside Dia

fr {Fillet radios}

D H Dia

bevel hub

Nos of Holes X Dia

PCD Bolt

Circle Dia

1/ 2” 3.50 1.38 1.19 0.44 0.62 1.88 0.62 0.88 0.90 0.12 0.38 0.84 4.062 2.38 3/ 4” 3.88 1.69 1.50 0.50 0.62 2.06 0.62 1.09 1.11 0.12 0.44 1.05 4.062 2.75

1” 4.25 2.00 1.94 0.56 0.69 2.19 0.69 1.36 1.38 0.12 0.50 1.32 4.062 3.12 1.1/4” 4.62 2.50 2.31 0.62 0.81 2.25 0.81 1.70 1.72 0.19 0.56 1.66 4.062 3.50 1.1/2” 5.00 2.88 2.56 0.68 0.88 2.44 0.88 1.96 1.97 0.25 0.62 1.90 4.062 3.88

2” 6.00 3.62 3.06 0.75 1.00 2.50 1.00 2.44 2.46 0.31 0.69 2.38 4.075 4.75 2.1/2” 7.00 4.12 3.56 0.88 1.12 2.75 1.12 2.94 2.97 0.31 0.75 2.88 4.075 5.50 3” 7.50 5.00 4.25 0.94 1.19 2.75 1.19 3.57 3.60 0.38 0.81 3.50 4.075 6.00

3.1/2” 8.50 5.50 4.81 0.94 1.25 2.81 1.25 4.07 4.10 0.38 0.88 4.00 8.075 7.00 4” 9.00 6.19 5.31 0.94 1.31 3.00 1.31 4.57 4.60 0.44 0.94 4.50 8.075 7.50 5” 10.00 7.31 6.44 0.94 1.44 3.50 1.44 5.66 5.69 0.50 0.94 5.56 8.088 8.50 6” 11.00 8.50 7.56 1.00 1.56 3.50 1.56 6.72 6.75 0.50 1.06 6.63 8.088 9.50 8” 13.50 10.62 9.69 1.12 1.75 4.00 1.75 8.72 8.75 0.50 1.25 8.63 8.088 11.75 10” 16.00 12.75 12.00 1.19 1.94 4.00 1.94 10.88 10.92 0.50 1.31 10.75 12.100 14.25 12” 19.00 15.00 14.38 1.25 2.19 5.50 2.19 12.88 12.92 0.50 1.56 12.75 12.100 17.00 14” 21.00 16.25 15.75 1.38 2.25 5.00 3.12 14.14 14.18 0.50 1.63 14.00 12.112 18.75 16” 23.50 18.50 18.00 1.44 2.50 5.00 3.44 16.16 16.19 0.50 1.75 16.00 16.112 21.25 18” 25.00 21.00 19.88 1.56 2.69 5.50 3.81 18.18 18.20 0.50 1.94 18.00 16.125 22.75 20” 27.50 23.00 22.00 1.69 2.88 5.69 4.06 20.20 20.25 0.50 2.13 20.00 20.125 25.00 22” 29.50 25.25 24.25 1.81 3.13 5.88 4.25 22.22 22.25 0.50 2.38 22.00 20.138 27.25 24” 32.00 27.25 26.12 1.88 3.25 6.00 4.38 25.25

This dimension is determined by the pipe schedule and its corresponding in side diameter .

24.25 0.50 2.50 24.00 20.138 29.50

Copy right@2007 Lanus Industires LLC USA.All right reserved.

80

Y Y2 Y3 B B2 B3 B4 NB

Pipe Size

O

O.D

R

RF Dia

X

Hub Dia

C Thkness

of Flange

T2 Max.

Thread Length

Overall length


fr Fillet radios

D H Dia

bevel hub

Nos of Holes X Dia

PCD Bolt

Circle Dia

1/ 2” 3.75 1.38 1.50 0.56 0.62 0.88 2.06 0.88 0.88 0.90 0.93 0.12 0.38 0.84 4-0.62 2.62 3/ 4” 4.62 1.69 1.88 0.62 0.62 1.00 2.25 1.00 1.09 1.11 1.14 0.12 0.44 1.05 4-0.75 3.25

1” 4.88 2.00 2.12 0.69 0.69 1.06 2.44 1.06 1.36 1.38 1.41 0.12 0.50 1.32 4-0.75 3.60 1.1/4” 5.25 2.50 2.50 0.81 0.81 1.06 2.56 1.06 1.70 1.72 1.75 0.19 0.56 1.66 4-0.75 3.68 1.1/2” 6.12 2.88 2.75 0.88 0.88 1.10 2.60 1.19 1.95 1.97 1.99 0.26 0.62 1.90 4-0.88 4.50

2” 6.50 3.62 3.31 1.00 1.12 1.31 2.75 1.31 2.44 2.46 2.50 0.31 0.69 2.38 8-0.75 5.00 2.1/2” 7.50 4.12 3.94 1.12 1.25 1.50 3.00 1.50 2.94 2.97 3.00 0.31 0.76 2.88 8-0.88 5.88 3” 8.25 5.00 4.62 1.25 1.25 1.69 3.12 1.69 3.57 3.60 3.63 0.36 0.81 3.50 8-0.88 6.62

3.1/2” 9.00 5.50 5.25 1.38 1.44 1.75 3.19 1.75 4.07 4.10 4.13 0.36 4.00 8-0.88 7.25 4” 10.75 6.79 6.00 1.50 1.44 1.88 3.38 1.88 4.57 4.60 4.63 0.44 4.50 8-0.88 7.68 5” 13.00 7.31 7.44 1.75 1.69 2.00 3.88 2.00 5.66 5.60 5.69 0.44 5.56 8-0.88 9.25 6” 14.00 8.50 8.75 1.88 1.81 2.06 3.88 2.06 6.72 6.75 6.75 0.50 6.63 12-0.88 10.62 8” 16.50 10.62 10.75 2.19 2.00 2.44 4.38 2.44 8.72 8.75 8.75 0.50 8.63 12-1.00 13.00 10” 20.00 12.75 13.50 2.50 2.10 2.62 4.62 3.75 10.88 10.92 10.92 0.50 10.75 16-1.12 16.25 12” 22.00 15.00 15.75 2.62 2.38 2.88 5.12 4.00 12.88 12.92 12.92 0.50 12.75 16-1.25 17.25 14” 23.75 16.25 17.00 2.75 2.50 3.00 5.62 4.38 14.14 14.18 14.18 0.50 14.00 20-1.25 20.25 16” 27.00 28.50 19.50 3.00 2.60 3.25 5.75 4.75 16.16 16.19 16.19 0.50 16.00 20-1.38 22.60 18” 29.25 21.00 21.50 3.25 2.75 3.50 6.25 5.12 18.18 18.20 18.19 0.50 18.00 24-1.38 24.75 20” 32.00 23.00 24.00 3.50 2.88 3.75 6.38 5.50 20.20 20.25 0.19 0.50 20.00 24-1.38 27.00 22” 34.25 25.25 26.25 3.75 3.13 4.00 6.56. 5.75 22.22 22.25 22.19 0.50 22.00 24-1.63 29.25 24” 37.00 27.25 28.25 4.00 3.25 4.10 6.62 6.00 24.25

This dimension is determ

ined by the pipe schedule and its corresponding in side diam

eter.

24.25 24.19 0.50

*No ASME data post 3” for this dimension 24.00 24-1.62 32.00

Flanges Dimensions



81

Y Y2 Y3 B B2 B3 B4 NB

Pipe Size

O

O.D

R

RF Dia

X

Hub Dia

C Thkness

of Flange

T2 Max.

Thread Length

Overall length


fr

Fillet radios

D H Dia

bevel hub

Nos of Holes X Dia

PCD Bolt

Circle Dia

1/ 2” 3.75 1.38 1.50 0.56 0.62 0.88 2.06 0.88 0.88 0.90 0.93 0.12 0.38 0.84 4-0.62 2.62 3/ 4” 4.62 1.69 1.88 0.62 0.62 1.00 2.25 1.00 1.09 1.11 1.14 0.12 0.44 1.05 4-0.76 3.25

1” 4.88 2.00 2.12 0.69 0.69 1.06 2.44 1.06 1.36 1.38 1.41 0.12 0.50 1.32 4-0.76 3.50 1.1/4” 5.25 2.50 2.50 0.81 0.81 1.12 2.62 1.12 1.70 1.72 1.75 0.19 0.56 1.66 4-0.76 3.86 1.1/2” 6.12 2.88 2.75 0.88 0.88 1.25 2.75 1.25 1.95 1.97 1.99 0.25 0.62 1.90 4-0.88 4.50

2” 6.50 3.62 3.31 1.00 1.12 1.44 2.88 1.44 2.44 2.46 2.50 0.51 0.69 2.36 8-0.76 5.00 2.1/2” 7.50 4.12 3.94 1.12 1.25 1.62 3.12 1.62 2.94 2.97 3.00 0.51 0.75 2.66 8-0.88 5.88 3” 8.25 5.00 4.62 1.25 1.38 1.81 3.25 1.81 3.57 3.60 3.63 0.58 0.81 3.60 8-0.88 6.62

3.1/2” 9.00 5.50 5.25 1.38 1.56 1.94 3.38 1.94 4.07 4.10 4.13 0.58 4.00 8-1.00 7.25 4” 10.75 6.19 6.00 1.50 1.62 2.12 4.00 2.12 4.57 4.60 4.63 0.44 4.50 8-1.00 8.60 5” 13.00 7.31 7.44 1.75 1.88 2.38 4.50 2.38 5.66 5.69 5.69 0.44 5.56 8-1.12 10.50 6” 14.00 8.50 8.75 1.88 2.00 2.62 4.62 2.62 6.72 6.75 6.75 0.50 6.63 12-1.12 11.50 8” 16.50 10.62 10.75 2.19 2.35 3.00 5.28 3.00 8.72 8.75 8.75 0.50 8.65 12-1.25 13.75 10” 20.00 12.75 13.50 2.50 2.56 3.38 6.00 4.38 10.88 10.92 10.88 0.50 10.76 16-1.36 17.00 12” 22.00 15.00 15.75 2.62 2.75 3.62 6.12 4.62 12.88 12.92 12.94 0.50 12.76 20-1.38 19.25 14” 23.75 16.25 17.00 2.75 2.88 3.69 6.50 5.00 14.14 14.18 14.19 0.50 14.00 20-1.50 20.75 16” 27.00 18.50 19.50 3.00 3.06 4.19 7.00 5.50 16.16 16.19 18.19 0.50 16.00 20-1.62 23.75 18” 29.25 21.00 21.50 3..25 3.12 4.62 7.25 6.00 18.18 18.20 18.10 0.50 18.00 20-1.75 26.75 20” 32.00 23.00 24.00 3.50 3.25 5.00 7.50 6.50 20.20 20.25 20.19 0.50 20.00 24-1.75 28.50 22” 34.25 25.25 26.25 3.75 …. 5.25 7.75 6.88 22.22 22.25 --- 0.50 22.00 24.1.75 30.63 24” 37.00 27.25 28.25 4.00 3.62 5.50 8.00 7.25 24.25

This dimension is determ

ined by the pipe schedule and its corresponding in side diam

eter.

24.25 24.19 0.50

*No ASME data post 3” for this dimension 24.00 24-2.00 33.00

Flanges Dimensions



82

Y Y2 Y3 B B2 B3 NB

Pipe Size

O

O.D

R

RF Dia

X

Hub Dia

C Thkness

of Flange

T2 Max.

Thread Length

Overall length

Norminal Bore Dia | Inside

Dia

B4 fr Fillet radios

D H Dia

bevel hub

Nos of Holes X Dia

PCD Bolt

Circle Dia

1/ 2” 4.75 1.38 1.50 0.88 0.88 1.25 2.38 1.25 0.88 0.90 0.93 0.13 0.38 0.84 4-0.88 3.25 3/ 4” 5.13 1.69 1.75 1.00 1.00 1.38 2.78 1.38 1.09 1.11 1.14 0.13 0.44 1.05 4-0.88 3.50

1” 5.88 2.00 2.06 1.13 1.13 1.63 2.88 1.63 1.36 1.38 1.41 0.13 0.50 1.32 4-1.00 4.00 1.1/4” 6.25 2.50 2.50 1.13 1.19 1.63 2.88 1.63 1.70 1.72 1.75 0.19 0.56 1.66 4-1.00 4.38 1.1/2” 7.00 2.88 2.75 1.25 1.25 1.75 3.25 1.75 1.95 1.97 1.99 0.25 0.63 1.90 4-1.13 4.88

2” 8.50 3.62 4.13 1.50 1.50 2.25 4.00 2.25 2.44 2.45 2.50 0.31 0.69 2.38 8-1.00 6.50 2.1/2” 9.63 4.12 4.88 1.63 1.88 2.50 4.13 2.50 2.94 2.97 3.00 0.31 0.76 2.88 8-1.13 7.50 3” 9.50 5.00 5.00 1.50 1.63 2.13 4.00 2.13 3.57 3.60 3.63 0.38 * 3.50 8-1.00 8.00

3.1/2” - - - - - - - - - - - - - - - 4” 11.50 6.19 6.25 1.76 1.88 2.75 4.50 2.75 4.57 4.60 4.63 0.44 * 4.50 8-1.25 9.25 5” 13.75 7.31 7.50 2.00 2.13 3.13 5.00 3.13 5.66 5.60 5.69 0.44 * 5.56 8-1.38 11.00 6” 15.00 8.50 9.25 2.10 2.25 3.38 5.50 3.38 6.72 6.75 6.75 0.50 * 6.63 12-1.25 12.50 8” 18.50 10.62 11.75 2.50 2.50 4.00 6.38 4.50 8.72 8.75 8.75 0.50 * 8.63 12-1.50 16.60 10” 21.50 12.75 14.50 2.75 2.81 4.25 7.25 5.00 10.88 10.92 10.92 0.50 * 10.75 16-1.50 18.50 12” 24.00 15.00 16.50 3.13 3.00 4.63 7.88 5.63 12.88 12.92 12.92 0.50 * 12.75 20-1.50 21.00 14” 25.25 16.00 17.75 3.38 3.25 5.13 8.38 6.13 * 14.18 14.18 0.50 * 14.00 20-1.63 22.00 16” 27.75 16.25 20.00 3.50 3.38 5.25 8.50 6.50 * 16.19 16.19 0.50 * 16.00 20-1.75 24.25 18” 31.00 18.5 22.25 4.00 3.50 6.00 9.00 7.50 * 18.20 18.19 0.50 * 18.00 20-2.00 27.00 20” 33.75 21.00 2.50 4..25 3.63 6.25 9.75 8.25 * 20.25 20.19 0.50 * 20.00 20-2.13 29.60 22” - - - - - - - - - - - - - - - - 24” 41.00 27.25 29.50 5.50 4.00 8.00 11.50 10.50 *

This dimension is determined by the pipe schedule and its corresponding in side diameter.

24.25 24.19 0.50 * 24.00 20-2.63 33.60

Flanges Dimensions



83

Y Y2 Y3 B B2 B3 NB

Pipe Size

O

O.D

R

RF Dia

X

Hub Dia

C Thkness

of Flange

T2 Max.

Thread Length

Overall length


Dia

B4 fr Fillet radios

D H Dia

bevel hub

Nos of Holes X Dia

PCD Bolt

Circle Dia

1/ 2” 4.75 1.38 1.50 0.88 0.88 1.25 2.38 1.25 0.88 0.90 0.93 0.13 0.38 0.84 4-0.88 3.25 3/ 4” 5.13 1.69 1.75 1.00 1.00 1.38 2.78 1.38 1.09 1.11 1.14 0.13 0.44 1.05 4-0.88 3.50

1” 5.88 2.00 2.06 1.13 1.13 1.63 2.88 1.63 1.36 1.38 1.41 0.13 0.50 1.32 4-1.00 4.00 1.1/4” 6.25 2.50 2.50 1.13 1.19 1.63 2.88 1.63 1.70 1.72 1.75 0.19 0.56 1.66 4-1.00 4.38 1.1/2” 7.00 2.88 2.75 1.25 1.25 1.75 3.25 1.75 1.95 1.97 1.99 0.25 0.63 1.90 4-1.13 4.88

2” 8.50 3.62 4.13 1.50 1.50 2.25 4.00 2.25 2.44 2.45 2.50 0.31 0.69 2.38 8-1.00 6.50 2.1/2” 9.63 4.12 4.88 1.63 1.88 2.50 4.13 2.50 2.94 2.97 3.00 0.31 0.76 2.88 8-1.13 7.50 3” 10.50 5.00 5.25 1.88 2.00 2.88 4.63 2.88 3.57 3.60 3.63 0.38 * 3.50 8-1.25 7.50

3.1/2” - - - - - - - - - - - - - - - 4” 12.25 6.19 6.38 2.13 2.25 3.56 4.88 3.56 4.57 4.60 4.63 0.44 * 4.50 8-1.38 9.50 5” 14.75 7.31 7.75 2.88 2.50 4.13 6.13 4.13 5.66 5.69 5.69 0.44 * 5.56 8-1.65 11.60 6” 15.50 8.50 9.00 3.25 2.75 4.69 6.75 4.69 6.72 6.75 6.75 0.60 * 6.63 12-1.50 12.60 8” 19.00 10.62 11.50 3.63 3.00 5.63 8.38 5.63 8.72 8.75 8.75 0.60 * 8.63 12-1.76 16.60 10” 23.00 12.75 14.50 4.25 3.31 6.25 10.00 7.00 10.88 10.92 10.92 0.50 * 10.75 12-2.00 19.00 12” 26.50 15.00 17.75 4.88 3.63 7.13 11.13 8.63 12.88 12.92 12.92 0.50 * 12.75 16-2.13 22.60 14” 29.50 16.25 19.50 5.25 * * 11.75 9.50 * 14.18 14.18 0.50 * 14.00 16-2.38 26.00 16” 32.50 18.50 21.75 5.75 * * 12.25 10.25 * 16.19 16.19 0.50 * 16.00 16-2.63 24.25 18” 36.00 21.00 23.50 6.38 * * 12.88 10.88 * 18.20 18.19 0.50 * 18.00 16-2.88 27.00 20” 38.75 23.00 25.25 7.00 * * 14.00 11.50 * 20.25 20.19 0.50 * 20.00 16-3.13 29.60 22” - - - - - - - - - - - - - - - - 24” 46.00 27.25 30.00 8.00 * * 16.00 13.00 *

This dimension is determined by the pipe schedule and its corresponding in side diameter.

24.25 24.19 0.50 * 24.00 16-3.63 33.60

Flanges Dimensions



84

Y Y2 Y3 B B2 B3 NB

Pipe Size

O

O.D

R

RF Dia

X

Hub Dia

C Thkness

of Flange

T2 Max.

Thread Length

Overall length


Dia

B4 fr Fillet radios

D H Dia

bevel hub

Nos of Holes X Dia

PCD Bolt

Circle Dia

1/ 2” 5.25 1.38 1.69 1.19 1.13 1.56 2.88 1.56 0.88 0.90 0.93 0.13 0.38 0.84 4-0.88 3.50 3/ 4” 5.50 1.69 2.00 1.25 1.25 1.69 3.13 1.69 1.09 1.11 1.14 0.13 0.44 1.05 4-0.88 3.78

1” 6.25 2.00 2.25 1.38 1.38 1.88 3.50 1.88 1.36 1.38 1.41 0.13 0.50 1.32 4-1.00 4.25 1.1/4” 7.25 2.50 2.88 1.50 1.50 2.06 3.75 2.06 1.70 1.72 1.75 0.18 0.56 1.66 4-1.13 5.13 1.1/2” 8.00 2.88 3.13 1.75 1.75 2.38 4.38 2.38 1.95 1.97 1.99 0.25 0.63 1.90 4.-1.25 5.75

2” 9.25 3.62 3.75 2.00 2.00 2.75 5.00 2.75 2.44 2.46 2.50 0.31 0.69 2.38 8-1.13 6.75 2.1/2” 10.50 4.12 4.50 2.25 2.25 3.13 5.63 3.13 2.94 2.97 3.00 0.31 0.75 2.88 8-1.26 7.75 3” 12.00 5.00 5.25 2.63 2.50 3.63 6.63 3.63 3.57 3.60 3.63 0.37 * 3.50 8-1.38 9.00

3.1/2” NA NA NA NA NA NA NA NA NA NA NA NA0.44 NA NA NA NA 4” 14.00 6.19 6.50 3.00 2.75 4.25 7.50 4.25 4.57 4.60 4.63 0.44 * 4.50 8-1.63 10.75 5” 16.50 7.31 8.00 3.63 3.00 5.13 9.00 5.13 5.66 5.69 5.69 0.50 * 5.56 8-1.88 12.75 6” 19.00 8.50 9.25 4.25 3.25 6.00 10.75 6.00 6.72 6.75 6.75 0.50 * 6.63 8-2.13 14.50 8” 21.75 10.62 12.00 5.00 3.75 7.00 12.50 7.00 8.72 8.75 8.85 0.50 * 8.63 12-2.13 17.25

10” 26.50 12.75 14.75 6.50 4.25 9.00 16.50 9.00 10.88 10.92 10.92 0.50 * 10.75 12-2.63 2125 12” 30.00 15.00 17.38 7.25 4.75 10.00 18.25 10.00 12.88

This dimension is determined by the pipe schedule and its corresponding in side diameter. 12.92 12.92 0.50 * 12.75 12-2.88 24.35

Flanges Dimensions



85

Flange Chemical Composition and Mechanical Properties

CHEMICAL COMPOSITION ( IN PERCENTAGE )

Grade C (Max)

Mn (Max) P (Max)

S (Max)

Si (Max)

Cr Ni Mo Nitrogen (Max)

Cu/ Others

301 0.15 2.00 0.045 0.030 1.00 16.00 - 18.00 6.00 - 8.00 - 0.10 - 304 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 10.50 - 0.10 -

304L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 12.00 - 0.10 - 310S 0.08 2.00 0.045 0.030 1.50 24.00- 26.00 19.00 - 22.00 - - - 316 0.08 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -

316L 0.030 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 - 317 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 14.00 3.00 - 4.00 0.10 -

317L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 15.00 3.00 - 4.00 0.10 - 321 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 12.00 - 0.10 Ti5 ( C + N ) Min or 0.70 max 347 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 13.00 - - Cb= 10x ( C Min ) or 1.00 Max

409 0.08 1.00 0.040 0.010 1.00 10.50 - 11.75 0.50 - - Ti= 6x (C+ N ) Min or 0.70 Max 409M 0.03 0.81.2 0.030 0.030 0.40.75 11.00- 12.00 1.5 max. - - Ti= 6x (C) Min or 0.70 Max 410S 0.08 1.00 0.040 0.030 1.00 11.50- 13.50 0.60 - - - 410 0.15 1.00 0.040 0.030 1.00 11.50- 13.50 0.75 - - - 420 0.35 0.50 0.035 0.015 0.50 12.00 - 13.00 0.20.3 - - - 430 0.12 1.00 0.040 0.030 1.00 16.00 - 18.00 0.75 - - - JSL AUS

0.08 7.08.0 0.070 0.030 0.75 15.50 - 16.50 4.25 - 4.75 - - 0.9 - 1.10

JS- 203 0.08 9.2510.25 0.070 0.030 0.75 14.25 - 15.25 2.25 - 2.75 - - 1.60- 2.0 301M 0.10 4.55.5 0.060 0.030 0.75 14.50 - 15.50 6.0 - 7.0 - - 1.70- 1.90

* Thickness of 1.27mm & below will have elongation of 20% min. MECHANICAL PROPERTIES

Hardness (Max) Grade Tensile Strength Mpa, (Min)

Yield Strength

Mpa, (Min)

%Age Elongation in 50mm

gauge length min

BHN Rb

301 515 205 40 217 95 304 515 205 40 201 92

304L 485 170 40 201 92 310S 515 205 40 217 95 316 515 205 40 217 95

316L 485 170 40 217 95 317 515 205 35 217 95

317L 515 205 40 217 95 321 515 205 40 217 95 347 515 205 40 201 92

409 380 170 20 179 88 409M 430 275 20 187 90 410S 415 205 22 183 89 410 450 205 20 217 89 420 700( max ) - 15 217 95 430 450 205 22 183 89

JSL AUS 515 205 40 217 95 JS- 203 515 205 40 217 95 301M 515 205 40 217 95


86

ISO 5211:2001(E):

Table 1 - Maximum Flange Torque Values

ISO 5211:2001(E):

Table 1 – Maximum flange torqure values 1Mpa = 1N/mm2


87

ISO 5211:2001(E):

Mounting Pet Flange Dimensions


88

VALVE

PRESSURE AND TEMPERATURE RATINGS Maximum Allowable Non-Shock Pressure, psig.

ANSI/ASME B 16.34-1988

Class 150, 300, & 600

Service Temperature Class 150 Class 300 Class 600

°F °C WCB (a)

WC1 (b)

WC6 (c)

WC9 (c) C5 WCB

(a) WC1 (b)

WC6 (c)

WC9 (c) C5 WCB

(a) WC1 (b)

WC6 (c)

WC9 (c) C5

-20 to 100 200 300

-29 to 38 93 149

285 260 230

265 260 230

290 260 230

290 260 230

290 260 230

740 675 655

695 680 655

750 710 675

750 715 675

750 750 730

1480 1350 1315

1390 1360 1305

1500 1425 1345

1500 1430 1355

1500 1500 1455

400 500 600

204 260 316

200 170 140

200 170 140

200 170 140

200 170 140

200 170 140

635 600 550

640 620 605

660 640 605

650 640 605

705 665 605

1270 1200 1095

1280 1245 1210

1315 1285 1210

1295 1280 1210

1410 1330 1210

650 700 750

343 371 399

125 110 95

125 110 95

125 110 95

125 110 95

125 110 95

535 535 505

590 570 530

590 570 530

590 570 530

590 570 530

1075 1065 1010

1175 1135 1065

1175 1135 1065

1175 1135 1065

1175 1135 1065

800 850 900

427 454 482

80 65 50

80 65 50

80 65 50

80 65 50

80 65 50

410 270 170

510 485 450

510 485 450

510 485 450

500 440 355

825 535 345

1015 975 900

1015 975 900

1015 975 900

995 880 705

950 1000 1050

510 538 566

35 20

35 20

35 20 20*

35 20 20*

35 20 20*

105 50

280 165

380 225 140

380 270 200

260 190 140

205 105

560 330

755 445 275

755 535 400

520 385 280

1100 1150 1200

593 621 649

20*

20*

20* 20* 20*

95

115

105 70 45

190

225

205 140 90

Hydrostatic Shell

Test Pressure 450 400 450 1125 1050 1125 2225 2100

2250

Fluid 314 292 319 814 765 825 1628 1529 1650 Valve Closure

Test Pressure

Gas 80 80 80

Notes:

(a)—Permissible, but not recommended for prolonged usage above about 427°C (800°F). (b)—Permissible, but not recommended for prolonged usage above about 454°C (850°F). (c)—Not to be used over 1100°F. * For welded end valves only. Flanged end ratings terminate at 538°C (1000°F).


89

VALVE

Pressure-Temperature Ratings Cl 900, 1500, & 2500

(comply with ANSI B16.34-1981-Standard Class) Steel, Nickel Alloy and Other Special Alloys Working Pressure, PSIG

Class Temp F

Temp C

A216 WCB

A105

A217 C5

A217 WC6 A182 F11

A217 WC9 A182 F22

A352 LCB

A352 LC3 A350 LF3

A351 CF8M A182 F316

A351 CF3M

A351 CF8 A182 F304

A351 CF3

A351 CF8C

A351 CN7M

Class 1500

-20 to 100 200 300 400 500 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500

2220 2025 1970 1900 1795 1640 1610 1600 1510 1235 805 515 310 155

- - - - - - - - - -

2250 2250 2185 2115 1995 1815 1765 1705 1595 1490 1315 1060 780 575 420 310 205 135

- - - - - -

2250213520201975192518151765170515951525146013501130670 410 290

- - - - - - - -

2250215020301945192018151765170515951525146013501130805 595 340

- - - - - - - -

2085197019151850174516001570

- - - - - - - - - - - - - - - - -

2250225021852115199518151765

- - - - - - - - - - - - - - - - -

216018601540154014351355133012951270124512151180116010901080985 825 620 545 410 310 225 175 125

21601860154015401435135513301295127012451215

- - - - - - - - - - - - -

2160 1800 1410 1410 1310 1245 1225 1210 1195 1180 1165 1150 1125 965 925 770 585 465 330 245 185 145 105 70

2160180014101410131012451225121011951180

- - - - - - - - - - - - - -

216019101765166515551475144014051385137013301295116010901080965 825 515 370 280 205 155 125 105

1800 1670 1570 - - - - - - - - - - - - - - - - - - - - -

Class 2500

-20 to 100

200 300 400 500 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500

3705 3375 3280 3170 2995 2735 2685 2665 2520 2060 1340 860 515 260

- - - - - - - - - -

3750 3750 3640 3530 3325 3025 2940 2840 2660 2485 2195 1765 1305 960 705 515 345 225

- - - - - -

37503560336532903210302529402840266025402435224518851115685 480

- - - - - - - -

37503580338532403200302529402840266025402435224518851340995 565

- - - - - - - -

3470328031903085291026652615

- - - - - - - - - - - - - - - - -

3750375036403530332530252940

- - - - - - - - - - - - - - - - -

360030952795257023902255222021602110207520301970193018201800161013701030910 685 515 380 290 205

36003095279525702390225522202160211020752030

- - - - - - - - - - - - -

3600 3000 2640 2350 2185 2075 2040 2015 1990 1970 1945 1920 1870 1610 1545 1285 980 770 550 410 310 240 170 120

3600300026402350218520752040201519901970

- - - - - - - - - - - - - -

36003180294027702590246024002340230522802220216019301820180016101370855 615 465 345 255 205 170

3000 2785 2615 - - - - - - - - - - - - - - - - - - - - -


90

ALLOY MATERIALS SPECIFICATIONS

Alloy Steel 2315 2340 2515 3140 3145 3150 3310 3312 3315 4015 4017 4020 4023 4037 4085 4112 4115 4120 4125 4127 4130 4135 4140 4142 4145 4150 4155 4160 4215 4320 4335 4340 4615 4620 4630 4640 4720 5150 52100 6120 6140 6145 6150 6170 6470 7290 8140 8150 8160 8615 8617 8620 8630 8640 8642 8645 8720 8735 8740 8750 9115 9260 9310

Alloy Steels 9315 9317 9430 9840 9850 Alloy Steel Special Grades HP9-4-20 HP9-4-30 CBS600 MA 15 MA 28 D6AC HY80 HY100 F-11(1 1/4 CR-1/2 MO) F-22(2 1/4 CR-1 MO) F-5(CR-1/2MO) F-91 17-22 A 17-22 AS 17-22 AV Nitralloy 135N LF1 LF2 LF3 Astroloy Astroloy M Aluminum 1100 2014 2024 2219 5083 5086 6061 6063 7049 7050 7075 7079 7175 7475 Carbon Steel 1003 1005 1006 1008 1010 1012 1015 1018 1020 1022 1023 1025 1026 1029 1030 1035 1040 1045 1055 1070

Copper Alloys Aluminum Bronze Nickel Aluminum Bronze C613 C623 C624 C630 C632 Copper Ni C706 (90/10) C715(70/30) Magnesium Alloys AZ80 AZ61A ZK60A AZ31B Nickel, Cobalt, Special Alloys A-286 • AM-355 Custom 450 Custom 455 Ferralium 255 Hastelloy B2 Hastelloy C Hastelloy C276 Hastelloy N Hastelloy S Hastelloy W Hastelloy X Haynes 188 Haynes 230 Incoloy 800 Incoloy 825 Incoloy 832 Incoloy 890 Incoloy 925 Inconel 600 Inconel 601 Inconel 617 Inconel 625 Inconel 690 Inconel 702 Inconel 706 Inconel 713 Inconel 718 Inconel 722 Inconel 725 Inconel 738 Inconel 750 Inconel 751 Inconel 800 Inconel 825 Inconel 901 Inconel 902 Inconel 903 Inconel W Invar 36 Invar 42 Jethete M152 Kovar Rodar L605 Haynes 25

Nickel, Cobalt, Special Alloys Maraging 250, Maraging 300 Maraging 350 Monel 400 (reg.) Monel 500 (K) Nickel 200 Nickel 201 Nitronic 40 Nitronic 50 Nitronic 60 N155 Multimet Nimonic 75 Nimonic 80 Nimonic 90 Rene 41 Udimet 500 Udimet 700 Vascojet 1000 Waspalloy Zirconium 20 CB Stainless Steel 254 SMO 2205 Super Duplex 300 Series 302 303 304L 309 310 314 316L 317L 321 322 329 330 333 347 348 400 Series 403 405 409 410 414 416 418 420 422 429 430F 431 440A 440C 442 446 500 Series 501 502

Stainless Steel PH Grades 13-8MO 15-5PH 15-7MO 17-4PH Titanium Alloys Commercially Pure 4AL-3MO-1V 4AL-4MN 5AL-2.5SN 6AL-2SN -4ZR-2MO 6AL-2SN -4ZR-6MO 6AL-4V 6A1-6V-2SN 7AL-4MO 8AL-1MO-1V 13.5V -11CR-3AL Ti17 CP Grade 1 CP Grade 2 CP Grade 3 CP Grade 4 CP Grade 7 CP Grade 11 CP Grade 12 Tool Steel A2 A6 A10 D2 D3 D5 D6 H11 H12 H13 H21 H26 H43 M2 P20 S1 S5 S7 T1 W1 W2


91

CAST IRON & DUCTILE IRON Materials Specifications

Materials Specificatons Inlet

Outlet

Main Valve Pilot Valve Pressure Temp Operating Pressure

Emergency Overpressure

Spring Range Descrip. (Abbr.)

ASTM No.

Descrip. (Abbr.)

ASTM No.

Main Valve end

Connections psig (Barg) Deg F Deg C

psig (Barg) psig (Barg) psig Barg

145 (10.0) 375 191 145 10.0 100 6.9 140 (9,7) 400 205 140 9.7 100 6.9 130 (9.0) 425 219 130 9.0 100 6.9

125# Flgd

125 (8.6) 450 232

1.10 x UVRS Up to 125psig (up to8.6 Barg)

125 8.6 100 6.9 270 (18.6) 425 219

CI/DI/CS /SS

A126-Cl.B/ A395/ A513/ A285. Gr.B

CI/DI

A395/ A126. CL B

250#

Flgd. Or NPT or BPST

250 (17.2) 450 232 1.10 x UVRS

Up to 150 psig(UP

To 10.3(Barg)

150

10.3

100

6.9

200 13.8 400 205

DI/CI

A395 A126.Cl B

185 12.7 450 232 150 10.3

200 13.8 400 232 DI/CS

A395/A216 Gr. WCB

150#Flgd

185 12.7 450 200 13.8

10,3

100

6.9

DI/CI

A395/

A126.Cl B

300# Flgd.Or

NPT

300 20.7 450 232 150 13.8 100 6.9

CI/DI/CS /SS

A216- Gr.

WCB

A395/ A513/ A285. Gr.B

DI/CS A395/

A216.Gr. WCB

300# Flgd. Or NPT 300 20.7 450 232

1.10 x UVRS up to 150psig up to 3Barg

200 10,3 100 6.9

Limit is the lower pressure value of 125/150 psi (8.6/10.3 Barg). Or the factor x UVRS (UVRS=Upper Value of Range Spring).Example Steel body-for a 30-80 psig (2.1-5.5 Barg ) standard range spring, the 1.10 x UVRS value = 1.10 x 80 = 88 psig. 88 < 150, therefore pressure limit = 88 psig (1.10 x 5.5 = 6.1 Barg; < 10.3,therefore pressure limit = 6.1 Barg). “ Emergency Overpressure. Safety relief valve Psepert + Paccumuate must not exceed this pressure level. NOTE: All outlet temperature levels are thermodynamically determined by the maximum inlet pressure temperature conditions.

Note: Titanium, Hastelloy B & Hastelloy C, Copper Aluminum Bronze Valve, Titanium, Inconel Valve, Duplex and Super Duplex Valve also available.


92

LANUS CASTING MATERIALS

LANUS Material Suffix

Common Designation

ASTM Casting

Specification Service Recommendations

LCB Low Temp Carbon Steel

ASTM A352 Grade LCB

Low temperature applications to -50°F (-46°C). Not for use above +650°F (+340°C).

LCC Low Temp Carbon Steel

ASTM A352 Grade LCB


LC1 Low Temp Carbon Steel

ASTM A352 Grade LC1


LC2 Low Temp Carbon Steel

ASTM A352 Grade LC2


LC3 31/2% Nickel Steel

ASTM A352 Grade LC3


WC6 11/4%Chrome 1/2% Moly Steel

ASTM A217 Grade WC6

Non-corrosive applications including water, oil and gases at temperatures between -20°F (-30°C) and +1100°F (+593°C).

WC9 21/4%Chrome ASTM A217 Grade C9

Non-corrosive applications including water, oil and gases at temperatures between -20°F (-30°C) and +1100°F (+593°C).

C5 5%Chrome 1/2% Moly

ASTM A217 Grade C5

Mild corrosive or erosive applications as well as non-corrosive applications at temperatures between -20°F (-30°C) and +1200°F (+649°C).

C12 9%Chrome 1% Moly

ASTM A217 Grade C12

Mild corrosive or erosive applications as well as non-corrosive applications at temperatures between -20°F (-30°C) and +1200°F (+649°C).

CA6NM 12% Chrome Steel

ASTM A487 Grade CA6NM

Corrosive application at temperatures between -20°F (-30°C) and +900°F (+482°C).

CA15 12% Chrome ASTM A217 Grade CA15

Corrosive application at temperatures up to +1300°F (+704°C)

CF8M 316SS ASTM A351 Grade CF8M

Corrosive or either extremely low or high temperature non-corrosive services between -450°F (-268°C) and +1200°F (+649°C). Above +800°F (+425°C) specify carbon content of 0.04% or greater.

CF8C 347SS ASTM 351 Grade CF8C

Primarily for high temperature, corrosive applications between -450°F (-268°C) and +1200°F (+649°C). Above +1000°F (+540°C) specify carbon content of 0.04% or greater.

CF8 304SS ASTM A351 Grade CF8

Corrosive or extremely high temperatures non-corrosive services between -450°F (-268°C) and +1200°F (+649°C). Above +800°F (+425°C) specify carbon content of 0.04% or greater.

CF3 304L SS ASTM A351 Grade CF3

Corrosive or non-corrosive services to +800F (+425°C).

CF3M 316L SS ASTM A351 Grade CF3M Corrosive or non-corrosive services to +800F (+425°C).

CN7M Alloy-20 ASTM A351 Grade CN7M

Good resistance to hot sulfuric acid to +800F (+425°C).

M-35 Monel ASTM 743 Grade M3-35-1

Weldable grade. Good resistance to corrosion by all common organic acids and salt water. Also highly resistant to most alkaline solutions to +750°F (+400°C).

N-12M Hastelloy B ASTM A743 Grade N-12M

Is well suited for handling hydrofluoric acid at all concentrations and temperatures. Good resistance to sulphuric and phosphoric acids to +1200°F (+649°C).

CW12M Hastelloy C ASTM A743 Grade CW-12M

Good resistance to strong oxidation conditions. Good properties at high temperatures. Good resistance to sulphuric and phosphoric acids to +1200°F (+649°C).

CY-40 inconel ASTM A743 Grade CY-40

Very good for high temperature service. Good resistance to strongly corrosive media and atmosphere to +800°F (+425°C).

B62 Bronze ASTM B62 Water, oil or gas: up to 400°F. Excellent for brine and seawater service.


93

Duplex Stainless Steel UNS S31803 - UNS S32205

Duplex Plate/Sheet Duplex Seamless & Welded Tube Duplex Seamless & Welded Pipe

Duplex Round Bar Duplex Flanges F51

Duplex Specialty Forgings Duplex Seamless & Welded BW Fittings

Trade Name

UNS 6Moly Industry Specifications Chemical Composition

Min.Tensile (KSI)

Min.Yield (KSI)

Elongation %

SAF 2205 UNS S31803

ASME SA-182 (F51), SA-240, SA-798, SA-790, SA-815 ASTM A240, A276, A479, A789, A790, A815, A923, A928, A988 SAE J405

C 0.30 max Cr 21.0-23.0 Mn 2.00 max Mo 2.50-3.50 N 0.08-0.20 Ni 4.50-6.50 P 0.030 max S 0.020 max Si 1.00 max

90 65 25

SAF 2205 UNS S32205

ASTM A240, A240M, A276, A479, A480, A480M, A798, A7901, A815, A923, A928, A988 SAE J40


90 65 25



94

SUPER DUPLEX UNS S32750 & UNS 32760

SPECIFICATIONS Trade Name

UNS Super Duplex Industry Specifications

Chemical Composition

Min.Tensile (KSI)

Min.Yield (KSI)

Elongation 2" %

SAF 2507 UNS S32750

ASTM A183(F53), A240, A479, A789, A790, A815, A928, A949, A988 SAE J405


116 80 15

Zeron 100 UNS S32760

ASTM A812(F55), A240, A276, A314, A473, A479, A789, A790, A815, A988 SAE J405

C 0.03 max Cr 24.0-26.0 Cu 0.5-1.0 Mn 1.0 max Mo 3.0-4.0 N 0.2-0.3 Ni 6.0-8.0 P 0.03 max S 0.01 max Si 1.0 max W 0.5-1.0 Other %Cr+3.3x%Mo+16x%N = 40 min

109 80 15

This is a Duplex alloy stainless Steel designed to feature high strength, resistance to pitting, stress corrosion cracking, erosion Corrosion and corrosion fatigue, orevice corrosion and strong weldablity. Super Duplex Applications Oil and gas industry equipment, Offishore platforms, heat exchangers, process and services water systems, fire-fighting system, injection and ballast water systems, Chemical process industries, heat exchangers, vessels, and piping, Desalination plants, high pressure RO-plants and seawater piping, Mechanical and structural components, high strength, corrosion-resistant parts, Power industry FGD systems, utility and industrieal scrubber system, absorber towers, ducting, and piping. Super Duplex Corrosion Resisance The high chromium and molybdenum content of Super Duplex makes it extremely resistant to uniform Corrosion by organic acids like formic and acetic acid. Supper Duplex also provides excellent resistance to inorganic acids, especially those containing chlorides. Note: Titanium, Hastelloy B & Hastelloy C, Copper Aluminum Bronze Valve, Titanium, Inconel Valve, Duplex and Super Duplex Valve also available.


95

Comparison of Standard Specifications

for OSNA®-10 (CuNi 90/10)

KME Alloy OSNA®-10

(CuNi 90/10)

DIN 17664 2.0872

DIN 860192.1972

BS 2871 CN 102

EEMUA 144-1987

UNS C 7060 x

MIL-T-16420K ASTM B

466 C 70600

JIS H 3300C 7060 T

Ni % 10.0 - 11.0 9.0 - 11.0 9.0 - 11.0 10.0 - 11.0 10.0 - 11.0 9.0 - 11.0 9.0 - 11.0 Fe % 1.5 - 1.8 1.0 - 2.0 1.5 - 1.8 1.0 - 2.0 1.5 - 2.0 1.0 - 1.8 1.0 - 1.8 Mn % 0.6 - 1.0 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 max. 1.0 0.2 - 1.0 C % max. 0.05 max. 0.05 max. 0.05 max. 0.05 max. 0.05 max. 0.05 Pb % max. 0.01 max. 0.03 max. 0.01 max. 0.01 max. 0.01 max. 0.02 max. 0.05 S % max. 0.005 max. 0.02 max. 0.005 max. 0.05 max. 0.02 max. 0.02 P % max. 0.02 max. 0.02 max. 0.02 max. 0.02 max. 0.02

Zn % max. 0.05 max. 0.50 max. 0.05 max. 0.20 max. 0.50 max. 0.50 other imp. max. 0.20 max. 0.30 max. 0.20 max. 0.30 max. 0.30

Cu % rem. rem. rem. rem. rem. rem. +Ni+Fe+Mn min. 99.5

Comparison of Standard Specifications

for OSNA®-30 (CuNi 70/30)

KME Alloy OSNA®-30

DIN 17664 2.0882

BS 2871 CN 107

MIL-T-16420 ASTM B 466

C 71500 JIS H 3300 C 7150 T

Ni % 30.0 - 32.0 30.0 - 32.0 30.0 - 32.0 29.0 - 33.0 29.0 - 33.0 Fe % 0.4 - 0.7 0.4 - 1.0 0.4 - 1.0 0.4 - 1.0 0.4 - 1.0 Mn % 0.5 - 1.0 0.5 - 1.5 0.5 - 1.5 max. 1.0 0.2 - 1.0 C % max. 0.04 max. 0.05 max. 0.06 max. 0.05 Pb % max. 0.01 max. 0.03 max. 0.01 max. 0.02 max. 0.05 S % max. 0.01 max. 0.02 max. 0.08 max. 0.02 P % max. 0.02 max. 0.02 max. 0.02


96

6 Moly – 6% Molybdenum Stainless Steels UNS S31254 – UNS N08925 – UNS N08926 6 Moly Plate/Sheet 6 Moly Seamless & Weld Tube 6 Moly Seamless & Weld Pipe 6 Moly Round Bar 6 Moly Specialty Forgings Trade Name

UNS 6Moly Industry Specifications Chemical Composition

Min.Tensile (KSI)

Min.Yield (KSI)

Elongation %

254 SMO UNS S31254

ASME SA-182, SA-240, SA-249, SA-312, SA-358, SA-409, SA-479, SA-480 ASTM A182 (F44), A193, A240, A249, A269, A270, A276, A312, A358, A403, A409, A473, A479, A480, A813, A814, A988 SAE J405

C 0.020 max Cr 19.50-20.5 Cu 0.50-1.00 Mn 1.00 max Mo 6.00-6.50 N 0.18-0.220 Ni 17.50-18.50 P 0.030 max S 0.010 max Si 0.80 max

94 44 35

N/A UNS N08925

ASME SB-625, SB-649, SB-673, SB-674 ASTM B366, B625, B649, B673, B674, B677

C 0.020 max Cr 19.0-21.0 Cu 0.80-1.50 Fe rem Mn 1.00 max Mo 6.00-7.00 N 0.10-0.20 Ni 24.0-26.0 P 0.045 max S 0.030 max Si 0.50 max

94 43 35

Alloy 25-6MO/ Alloy 926

UNS N08926

ASME SB-366, SB-625, SB-649, SB-673, SB-674, SB-677 ASTM A240, A249, A269, A270, A314, A358, A480, A688, A959, B366, B472, B625, B649, B673, B674, B677, B804 SAE J405

C 0.020 max Cr 19.0-21.0 Cu 0.50-1.5 Fe rem Mn 2.00 max Mo 6.00-7.00 N 0.15-0.25 Ni 24.0-26.0 P 0.030 max S 0.010 max Si 0.50 max

94 43 35

Moldydenum General Information Molybdenum is a lustrous, silvery colored metal which has an abundance of 1.5 ppm in the earth's crust. In many instances, it shows a resemblance to tungsten with which it tends to be paired in the transition series in the periodic table, but their chemistries tend to show

more distinct differences than might be expected. Molybdenum has a high melting point and applications for the pure metal take advantage of this; for example, the pure material is used as resistance heating elements in furnaces, as filament supports in electric lamps, and as electrodes for mercury vapor lamps. Molybdenum is used as an alloying agent in certain grades of steel, Permalloys and Stellites (a series of alloys which contain varying proportions of Cr, Co, W and Mo, are very hard and are used in cutting tools and to protect surfaces subject to heavy wear).

Molybdenum Key Properties Low co-efficient of thermal expansion (5.1x10-6 m/m/°C) which is about half that of most steels, Good thermal conductivity, Good electrical conductivity, Good stiffness, greater than that of steel (Young’s Modulus 317MPa), High melting point (2615°C),

Good hot strength, Good strength and ductility at room temperature,


97

High density (10.2 g/cm3) Molybdenum's ability to withstand high temperatures and maintain strength under these conditions are responsible for the fact that molybdenum finds most of its application at elevated temperatures. In fact, it can work at temperatures above 1100°C (in non-oxidizing conditions), which is higher than steels and nickel-based superalloys. When exposed to temperatures in excess of 760°C in air rapid oxidation can result. Under these conditions, the oxide layer sublimes

and the base metal is attacked. Thus, molybdenum performs best in inert of vacuum environments.

Molybdenum Applications Seawater Handling Equipment Pulp Mill Bleach Systems Tall Oil Distillation Columns and Equipment

Chemical Processing Equipment Food Processing Equipment Desalination Equipment Flue Gas Desulfurization Scrubbers Oil and Gas Production Equipment



98

Standard Code Name ASME Standard Name

ASME A112.4.1 Water Heater Relief valve Drain Tubes ASME A112.14.1 Backwater Valves R(1998)

ASME A112.19.10 Dual Flush Devices for Water Closets ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves

ASME B16.10 INT NO.1 Interpretations No. 1 to B16.10 Face-to-Face and End-to-end Dimensions of valves

ASME B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig (Sizes 1/2 Through 2)

ASME B16.34 Valves - Flanged, Threaded, and Welding End ASME B16.34 INT Interpretations to B16.34 Valves - Flanged, Threaded and welding end

ASME B16.38 Large Metallic Valves for Gas Distribution (Manually operated, NPS 2 1/2 to 12, 125 psig Maximum)R(1994)

ASME B16.40 Manually Operated Thermoplastic Gas Shutoffs and valves in gas distribution systems R(1994)

ASME B16.44 Manually Operated Metallic Gas Valves for Use in House Piping Systems

ASME B16.44A Addenda to B16.44-1995 Manually.Operated Metallic Gas valves for use in House piping systems

ASME B4 0. 6 Pressure Limiter Valves

ASME N2 78 . 1 Self-operated and Power-Operated Safety-Related valves functional specification standard reactor plants and their maintenance R (1992)

ASME Y32 .2 .3 Graphical Symbols for Pipe Fittings, Valves, and piping redesignation of Z32.2.3-49(1953)R (1994)

ASME PTC 2 5 Pressure Relief Devices

ASME SEC III D1 Appendice BPVC section III rules for construction of Nuclear power plant components division 1 - Appendices non-interfiled (boiler and pressure vessel codes)

ASME SEC III D1 AP BPVC SECTION III 1996 Addenda, Rules for construction of Nuclear power plant components

ASME SEC III D1 AP BPVC SECTION III 1997 Addenda, Rules for construction of Nuclear power plant components

ASME SEC IV BPVC SECTION IV Rules for Construction of Heating boilers Non-interfiled (boiler and pressure vessel)

ASME SEC IV ADD BPVC SECTION IV 1995 Addenda, Rules for construction of Nuclear power plant components division 1- appendices non-interfiled

ASME SEC VI BPVC SECTION VI Recommended Rules for the Care and operation ofj heating boilers non-interfiled (boiler and pressure vessel codes)

ASME SEC VI Add-95 BPVC SECTION VI 1995 Addenda, Recommended rules for the care and operation of heating boilers non-interfiled



ASME SEC VII BPVC section VII recommended guidelines for the care of power boilers non-interfiled (boiler and pressure vessel codes)


99

ASME SEC VII Add-95 BPVC section VII 1995 addenda, recommended guidelines for the care of power boilers non-interfiled



ASME SEC VIII division 1 BPVC section VIII rules for construction of pressure vessels division 1 non-interfiled (Boiler and pressure vessel codes)

ASME SEC VIII D1 Add-95 BPVC section VIII 1995 addenda, rules for construction of pressure vessels Division 1 non-interfiled

ASME SEC VIII division 2 BPVC section VIII rules for construction of pressure vessels division 2 non-interfiled (Boiler and pressure vessel codes)

ASME SEC X-95 BPVC section X fiber-reinforced plastic pressure vessel non-interfiled (boiler and pressure vessel codes)

ASME SEC X Add -96 BPVC section X 1996 addenda, fiber-reinforced plastic pressure vessel non-interfiled

ASME SEC X Add-97 BPVC section X 1997 addenda, fiber-reinforced plastic pressure vessel non-interfiled

ASME SEC I PT PG General requirements for all methods of construction

ASME SEC II-A SA-105 Specification for forgings, carbon steel, for piping components ASTM A 105

ASME SEC II-A SA-181 Specification for forgings, carbon steel, for general-purpose piping ASTM A 106

ASME SEC II-A SA-182 Specification for forged or rolled alloy steel pipe flanges, forged fittings and valves and parts for high temperature service ASTM A 182

ASME SEC II-A SA-350 Specification for Forgings, Carbon and Low-Alloy steel, requiring notch toughness testing for piping component

ASME SEC II-A SA-522 Specification for Forged or Rolled 8 and 9* Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

ASME SEC II-A SA-727 Specification for Forgings, Carbon Steel, for Piping Components with Inherent Notch Toughness ASTM A 727/A 727M-93 (Boiler and Pressure Vessel Codes)

ASME SEC II-A SA-836 Specification for Forgings, Titanium-Stabilized Carbon Steel, for Glass-Lined Piping and Pressure Vessel Service ASTM A 836/A 836M-93a (Boiler and -62 -9.V' Pressure Vessel Codes)

ASME SEC II-B-SB-62 Specification for Composition Bronze or ounce metal casting ASTMB 62-86(boiler and pressure vessel)

ASME SEC II-B-SB-369 Specification for Copper-Nickel Alloy Castings ASTM B369-87 (Boiler and Pressure Vessel Codes)

ASME SEC II-B-SB-462 Spec'ification for Forged or Rolled UNS N08020, UNS N08024, UNS N08026, and UNS N08367 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service ASTM B 462-91(Boiler and Pressure Vessel Codes)

ASME SEC III D1 ART Coverpressure protection

ASME SEC III D1 Apendices BPVC SECTION III Rules for Construction of Nuclear Power Plant Components DIVISION 1 - APPENDICES Addenda - 1995; Addenda - 1996; Addenda - 1997;Interfiled (Boiler and Pressure Vessel Codes)

ASME SEC III D1 MA Capacity Conversions for Pressure Relief valves (Boiler and Pressure Vessel Codes)


100

ASME SEC III D1 NMA O Ruies for Design of Safety Valve Installations ( Boiler and Pressure Vessel Codes)

ASME SEC III D1 NMA U Rules for Pump Internals (Boiler and Pressure Vessel Codes) ASME SEC IV PT HG ART 4 pressure Relieving Devices ASME SEC IV PT HG ART 8 Installation Requirements

ASME SEC IV NMA B Method of Checking Safety Valve and Safety Relief Valve Capacity by Measuring maximum Amount of Fuel That Can Be Burned (Boiler and Pressure Vessel Codes)

ASME SEC V A ART 4 Ultrasonic Examination Methods for Inservice Inspection (Boiler and Pressure Vessel Codes)

ASME SEC VI BPVC SECTION VI Recommended Rules for the Care and Operation of Heating Boilers Addenda - 1995;Addenda - 1996; Addenda - 1997; Interfiled (Boiler And pressure vessel codes)

ASME SEC VI EXHIBITS Exhibits (Boiler and Pressure Vessel Codes) ASME SEC vii c4 Appurtenances (Boiler and Pressure Vessel Codes)

ASME SEC VIII D1 MA 11 Capacity Conversions for Safety Valves (Boiler and Pressure Vessel Codes)

ASME SEC VIII D1 MA 25 Acceptance of Testing Laboratories and Authorized Observers for Capacity Certification of Pressure-Relief valves (Boiler and Pressure Vessel Codes)

ASME SEC VIII D1 NMA Nonmandatory Appendices (Boiler and Pressure Vessel Codes) ASME SEC VIII D1 NMA M Installation and operation (Boiler and Pressure Vessel Codes) ASME SEC VIII D2 PT AR Pressure Relief Devices (Boiler and Pressure Vessel codes)

ASME SEC VIII D2 ART R-1 General Requirements (Boiler and Pressure Vessel Codes) ASME SEC VIII D2 ART R-2 Material and Design Requirements (Boiler and pressure vessel Codes) ASME SEC VIII D2 ART R-4 Marking and stamping (Boiler and Pressure Vessel Codes)

ASME SEC VIII D2 ART R-5 Certification of Capacity of Safety and Safety-Relief Valves (Boiler and Pressure Vessel Codes)

ASME SEC VIII D2 ART R-6 t Provisions in vessels for Installation of Pressure Relieving devices(Boiler and Pressure vessel codes)

ASME SEC VIII D2 MA Mandatory Appendices (Boiler and Pressure Vessel Codes)

ASME SEC VIII D2 MA 10 Mandatory Capacity Conversions for Safety Valves (Boiler and Pressure Vessel Codes)

ASME SEC VIII D2 MA 22 Mandatory Acceptance of Testing Laboratories and Authorized Observers for Capacity Certification of Pressure Relief Valves (Boiler and Pressure Vessel Codes)

ASME SEC VIII D2 NMA Nonmandatory Appendices (Boiler and Pressure Vessel Codes)

ASME SEC VIII D2 NAM A Nonmandatory installation and operation (Boiler and pressure vessel codes)

ASME SEC VIII D3 PT KR BPVC SECTION VIII Rules for Construction of Pressure Vessels Division 3 - PART KR - Pressure Relief Devices

ASME SEC VIII D3 ART KR-3 Requirements for Pressure Relief valves ASME SEC VIII D3 ART KR-4 Marking and Stamping Requirements ASME SEC VIII D3 ART KR-5 Certification of Flow Capacity of Pressure Relief Valves


101

ASME SEC VIII D3 MA 4 Acceptance of Testing Laboratories and Authorized Observers for Capacity Certification of Pressure Relief Devices

ASME SEC X BPVC SECTION X Fiber-Reinforced Plastic essels Addenda - 1995; Addenda - 1996; Addenda- 1997; Interfiled (Boiler and Pressure Vessel Codes)

ASME SEC X PT RR Pressure Relief Devices (Boiler and Pressure Vessel Codes) ASME SEC X PT RR ART RR-1 General Requirements (Boiler and Pressure Vessel Codes)

ASME SEC X PT RR ART RR-2 Provisions in Vessels for Installation of Pressure Relief Devices (Boiler and Pressure Vessel Codes)

ASME SEC X MA 2 Mandatory Capacity Conversions for Safety Valves (Boiler and Pressure Vessel Codes)

ASME SEC X NMA AB Nonmandatory installation and operation (Boiler and pressure vessel codes)

ASME SEC XI D1 IWV Inservice Testing of Valves in Nuclear Power Plants(Boiler and Pressure Vessel Codes)

ASME SEC XI D1 ART IWV Requirements (Boiler and Pressure Vessel codes)

ASME SEC XI D2 IGV Inservice Testing of valves in Nuclear Power Plants (Boiler and Pressure vessel Codes)

ASME SEC XI D2 ART IGV-100 Scope and Responsibility (Boiler and Pressure Vessel Codes) ASME SEC XI D2 ART IGV-200 Mefinitions (Boiler and Pressure Vessel Codes) ASME SEC XI D2 ART IGV-300 Requirements (Boiler and Pressure Vessel Codes) ASME SEC XI D2 ART IGV-600 Records and Reports (Boiler and Pressure Vessel Codes)

ASME SEC XI D3 IMV Inservice Testing of Valves in Nuclear Power Plants (Boiler and Pressure Vessel Codes)

ASME SEC XI D3 ART IMV-100 Scope and Responsibility (Boiler and Pressure Vessel Codes) ASME SEC XI D3 ART IMV-200 Categories of Valves (Boiler and Pressure Vessel Codes) ASME SEC XI D3 ART IMV-300 Test Requirements (Boiler and Pressure Vessel Codes)


102

Valve standards from API - the American Petroleum Institute:

• API SPEC 6D Specification for Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems.

• API 526 Flanged Steel Pressure Relief Valves. The standard is a purchase specification for flanged steel pressure relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves as follows: orifice designation and area; valve size and pressure rating, inlet and outlet; materials; pressure-temperature limits; and center-to-face dimensions, inlet and outlet.

• API 527 Seat Tightness of Pressure Relief Valves R(2002). Describes methods of determining the seat tightness of metal- and soft-seated pressure relief valves, including those of conventional, bellows, and pilot-operated designs.

• ANSI/API STD 594 Check Valves: Flanged, Lug, Wafer and Butt-welding. API Standard 594 covers design, material, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for two types of check valves.

• API 598 Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure test requirements for both resilient-seated and metal-to-metal seated gate, globe, plug, ball, check, and butterfly valves. Pertains to inspection by the purchaser and to any supplementary examinations the purchaser may require at the valve manufacturer's plant.

• ANSI/API 599 Metal Plug Valves - Flanged, Threaded and Welding Ends. A purchase specification that covers requirements for metal plug valves with flanged or butt-welding ends, and ductile iron plug valves with flanged ends, in sizes NPS 1 through NPS 24, which correspond to nominal pipe sizes in ASME B36.10M. Valve bodies conforming to ASME B16.34 may have flanged end and one butt-welding end. It also covers both lubricated and nonlubricated valves that have two-way coaxial ports, and includes requirements for valves fitted with internal body, plug, or port linings or applied hard facings on the body, body ports, plug, or plug port.

• ANSI/API 600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries - Modified National Adoption of ISO 10434:1998.

• API 602 Compact Steel Gate Valves - Flanged, Threaded, Welding, and Extended-Body Ends. The standard covers threaded-end, socket-welding-end, butt-welding-end, and flanged-end compact carbon steel gate valves in sizes NPS4 and smaller.

• ANSI/API 603 Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends. The standard covers corrosion-resistant bolted bonnet gate valves with flanged or butt-weld ends in sizes NPS 1/2 through 24, corresponding to nominal pipe sizes in ASME B36.10M, and Classes 150, 300, and, 600, as specified in ASME B16.34.

• ANSI/API 607 Fire Test for Soft-Seated Quarter Turn Valves. The standard covers the requirements for testing and evaluating the performance of straightway, soft-seated quarter-turn valves when the valves are exposed to certain fire conditions defined in this standard. The procedures described in this standard apply to all classes and sizes of such valves that are made of materials listed in ASME B16.34.

• API 609 Butterfly Valves: Double Flanged, Lug- and Wafer-Type. The standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for gray iron, ductile iron, bronze, steel, nickel-base alloy, or special alloy butterfly valves that provide tight shutoff in the closed position and are suitable for flow regulation.

• API 6FA Specification for Fire Test for Valves. The standard covers the requirements for testing and evaluating the performance of API Spec 6A and Spec 6D valves when exposed to specifically defined fire conditions.

• API 6FC Fire Test for Valve with Automatic Backseats. The standard covers the requirements for testing and evaluating the performance of API Spec 6A and Spec 6D valves with automatic backseats when exposed to specifically defined fire conditions.

• API 6RS Referenced Standards for Committee 6, Standardization of Valves and Wellhead Equipment.

• API 11V6 Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves. The standard sets guidelines for continuous flow gas lift installation designs using injection pressure operated valves.

• ANSI/API RP 11V7 Recommended Practice for Repair, Testing, and Setting Gas Lift Valves. The standard applies to repair, testing, and setting gas lift valves and reverse flow (check) valves.

• API 520-1 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries: Part I - Sizing and Selection. The recommended practice applies to the sizing and selection of pressure relief devices used in refineries and related industries for equipment that has a maximum allowable working pressure of 15 psig (1.03 bar g or 103 kPa g) or greater.

• API 520-2 Recommended Practice 520: Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries-Part II, Installation.


103

The recommended practice covers methods of installation for pressure-relief devices for equipment that has a maximum allowable working pressure of 15 psig (1.03 bar g or 103 kPa g) or greater. It covers gas, vapor, steam, two-phase and incompressible fluid service.

• ANSI/API 574 Inspection Practices for Piping System Components. The standard covers the inspection of piping, tubing, valves (other than control valves) and fittings used in petroleum refineries.

• ANSI/API 576 Inspection of Pressure Relieving Devices. The recommended practice describes the inspection and repair practices for automatic pressure-relieving devices commonly used in the oil and petrochemical industries.

• ANSI/API 608 Metal Ball Valves - Flanged and Butt-Welding Ends. The standard covers Class 150 and Class 300 metal ball valves that have either butt-welding or flanged ends and are for use in on-off service.


104

Standard Code Name BS Standard Name

BS1212 Ball valves (portsmouth type ) excluding floats BS1123 Specificatin for safety valves, gauges and other safety fittings for air receivers and compressed air

installations BS1414 Specificationf for steel ewdge gate valves ( flanged and butt- welding ends ) for the petroleum,

petrochemical and allied industries BS1552 Control plug cocks for low – pressure gases BS1570 Specificatin for Flanged and Butt - welding ends steel plug valves for the perroleum insustry

(excluding well - Head and flow - line valves) BS1735 Specification for Flanged cast iron outside - screw - and - yoke ewdge gate valves class 125, size

1.5 in to 24 in for the petroleum industry BS1868 Specificatin for steel check valves (flanged and butt-welding ends ) for the petroleum, petrochemical

and allied industries BS1873 Specification for Steel globe and globe stop and check valves (flanged and butt-welding ends ) for

the petroleum, petrochemical and allied industries BS1952 Specification for copper alloy gate valves for general purposes BS1953 Copper alloy check valves for general purposes BS1968 Floats for Ball valves ( copper ) BS2060 Copper alloy screw - down stop valves for general purposes BS2080 Specification for Face - to - face, centre - to - face end - to -end and centre - to - end dimensions of

flanged and butt-welding ends steel valves for the petroleum, petrochemical and allied industries BS2591 PT.1 British standard glossary for valves and valve parts (for fluids ) part 1.screw - down stop ,check and

gate valves BS2591 PT.2 British standard glossary for valves and valves parts ( for fluids) part,2 safety valves and relief

valves BS2591PT.3 British standard glossary for valves and valve parts (for fluids ) part 3, Plug valves and cocks BS2591PT.4 British standard glossary for valves and valves (for fluids ) part4, butterfly valves BS2591PT.5 British standard glossary for valves and valve parts ( for fluids ) part5, Ball valves

BS2995 Specificatin for cast and forged steel wedge gate, glove, check and plug valves screwed and socket - Welding sizes 2 in and smaller for the petroleum industry

BS3464 Specification for cast iron gate valves for general purposes BS3808 Specificatin for cast and forged steel flanged, screwed and socket - welding Wedge gate valves

(compact design ) sizes 2 in and smaller for the petroleuum industry BS3948 Specification for cast iron parallel slide valves for general purposes BS3952 Specification for cast iron butterfly valves for general purposes BS3961 Specification for cast iron screw - down stop valves and stop and check valves for general purposesBS4090 Cast Iron check valves for general purposes BS4133 Flanged steel parallel slide valves for general purposes BS4312 Flanged steel screw - down stop valves and stop and check valves for general purposes BS4460 Steel Ball valves for the pertroleum industry BS5146 Specification for inspection and test of steelvalves for the petroleum petrochemical and allied

industries BS5150 Cast iron wedge and double disk gate valves for general purposes BS5151 Cast iron gate (parallel slide ) valves for general purposes BS5152 Cast iron globe and globe stop and check valves for general purposes BS5153 Cast Iron check valves for general purposes BS5154 Copper alloy globe stop and check, check and gate valves for general purposes BS5155 Cast iron and carbon steel butterfly valves for general purposes BS5156 Screw down diaphragm valves for general purposes BS5157 Steel gate (parallel slide ) valves for general purposes BS5159 Specification for cast iron and carbon steel ball valves for general purposes BS5160 Specification for Flanged steel globe valves, globe stop and check valves and lift type check valves

for general purposes BS5351 Steel ball valves for the petroleum petrochemicals and allied industries BS5417 Test of genera purpose industrial valves BS5418 Marking of general purpose industrial valves


105

Lanus Industries LLC W.O USA

Documents

Norma AP 6D