© Metso Minerals, Inc. 2003

The SW348 features three onboard conveyors and is ideally suited for small to medium sized contractorsand aggregate producers. It’s high output 8’ x 4’ four bearing, double deck, positive action screen, largecapacity hopper and hydraulically folding 600mm wide belts, ensure more tonnes per hour andconsequently lower cost products.

NORDBERG SW348

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

• Grid length 1.8m (5’ 10”) andgrid width 2.9m (9’ 10”). Nominalspacing of 127mm (5”).

• Grid bars made from highstrength EN8 steel.

• Grid bars fixed at high end andloose at discharge end.

• Hydraulic tipping grid withremote control option.

• Hopper loading width 3.8m (12’7”) and height 3.4m (11’ 2”).Hopper capacity 5.2m³ (6.8 cuyd).

• 750mm (30”) wide feeder beltwith optional variable speed.

• Feeder drive drum (diamondlagged) has chain and sprocketdrive via high torque hydraulicmotor.

• Large grid area and large spacingmeans quicker feed of materialinto hopper and faster cycle times.

• Longer life and less easilydamaged than mild steel.

• Lodged stones will fall free whengrid is tipped.

• One touch operation for clearingdebris from grid.

• Additional width and hoppercapacity suitable for large loadingshovels. Small loading rampneeded only.

• Precise control of material forefficient screening.

• Feeder can start from stop withhopper full of material. Laggeddrum prevents slippage.

The Nordberg SW348 grid,hopper and feeder:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

• Feed material spread evenlyover the width of conveyor

• Prevents roll back of material.

• Allows easy access to rollersfor maintenance = less downtime.

• Main conveyor can start fromstop under full load. Noslippage during use.

• Wide belt for high production.

• Quick set up times and foldaway times.

• Prevents roll back of material.

• More time feeding machine,less time taking product away= more production.

• 750mm (30”) wide mainconveyor.

• Main conveyor angle of 24°

• Removable skirt plates along theentire length of main conveyor.

• Coupling drive via high torquehydraulic motor. Diamond laggeddrive drum.

• 750mm (30”) wide productconveyor.

• Hydraulic folding productconveyor. One lever operation.

• Product conveyor angle of 24°

• 3.8m (12’ 7”) height, 106m³ (138cu yd) capacity under conveyor.

Nordberg SW348 main andproduct conveyor:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

• 2.4m x 1.2m (8’ x 4’), fourbearing, double deck, positiveaction screen box.

• End to end tensioned meshes.

• Screen eccentric is 6.4mm(.25”).

• Adjustable, free floating spreaderplate, spreads material overcomplete width of screen.

• Walkway at rear of screen,accessible via fixed ladders atboth sides of screen.

• 600mm (24”) wing conveyor,4.3m (14’ 3”) height, stockpilecapacity 150m³ (196 cu yd).

• Patented folding action.

• Variable speed on top deckoversize conveyor.

• Screen does not slow down withmaterial on screen = moreefficient screening, higherproduction.

• Best camber for efficientscreening.

• High production screening indifficult material.

• Complete width of screen isused, which leads to higherproduction and efficientscreening.

• Ease of access when changingmeshes. No set up required.

• More time feeding machine, lesstime taking product away = moreproduction.

• Allows for legal transport width.

• Prevents roll back of roundedstones.

Nordberg SW348 screenand wing conveyors:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

• Deutz F4L1011, 50HP / 37kW@ 2315 rpm.

• All controls at centralisedlocation within easy reach.

• All set up and tear downoperations are hydraulicallycontrolled.

• Lockable security engineenclosure.

• Easy access to hydraulic filtersfor servicing.

• Danfoss and Lamborghinihydraulic components used.

• 412 Lt (109 gallon) capacityhydraulic tank.

• Dual Granning air braked andsprung axles with dual wheels.On site towbar.

• Reliable engine manufacturer,with engine running belowcapacity giving it a long life.

• Fast setup and ease of use foroperator.

• Quick set up and fold awaywithout need for auxiliaryequipment.

• Vandal resistant.

• Service downtime is kept to aminimum.

• Long life, low maintenanceand reliable.

• Acts as cooling reservoir for oilcapacity to drive othercomponents.

• Compliant with most countrytransport regulations. Ease oftransport on and off site.

Nordberg SW348 engineand axle:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

• Can be used in very abrasivematerial, long lasting.

• Helps meter material flow ontoshredder tips.

• Quick change over time fromwhen shredder is not in use.

• No need to purchase additionalshredder unit for light material.

• Low maintenance costs.

• 16 no. Manganese tips used tobreak up material.

• Heavy duty chain curtain insideshredder chamber.

• Hydraulically folds out of positionwhen not in use.

• Peat blades (knives) can bepurchased as option to replacemanganese tips.

• Sealed for life bearings andDanfoss hydraulic motor.

Nordberg SW348 options:

Shredder:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

Feature Machine SpecificationGrid and Feeder Base Euro 1 Euro 2Manual tipping grid Opt. Opt. Opt.Hydraulic tipping grid Opt. Opt. Opt.Remote hydraulic tipping grid Opt. Opt. Opt.Variable speed feeder Opt. Opt. Opt.ScreenTwo deck, four bearing screen Incl. Incl. Incl.Platform on rear of screen Incl. Incl. Incl.Access ladders to both sides of platform Incl. Incl. Incl.Remote greasing of screen bearings Incl. Incl. Incl.Main / Wing / Product ConveyorsHydraulic folding Incl. Incl. Incl.Skirt plates / side guards length of main conveyor Incl. Incl. Incl.Engine and HydraulicsF4L1011 Deutz engine Incl. Incl. Incl.Lamborghini tandem hydraulic pump Incl. Incl. Incl.Hydraulic jacklegs Incl. Incl. Incl.Engine canopy enclosure Incl. Incl. Incl.Emergency stop kit Incl. Incl. Incl.Hydraulic oil cooler Incl. Incl. Incl.Axle and TransportBraked axles with auto slack adjusters Incl. N/A N/ABraked axles with manual slack adjusters N/A Incl. Incl.12V ABS unit Opt N/A N/A24V ABS unit N/A Incl. Opt.12V Light system Incl. N/A N/A24V Light system (CE approved) N/A Incl. Incl.Other OptionsShredder Opt Opt Opt

SCOPE OF SUPPLYNordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

UNITS SW348English Conv. (x) Metric English Metric

Hopper:Hopper capacity yd3 0.7646 m3 6.8 5.2Hopper loading width ft 0.3048 mm 12' 7" 3.8Hopper loading height (min) ft 0.3048 mm 11' 2" 3.4Grizzly area ft 0.3048 mm 9' 10"x5' 10" 2.9x1.8Grizzly spacing in 25.40 mm 5" 127Grizzly angle o 1.0000 o 20°Conveyor(s):Feed conveyor width in 0.0254 mm 30 750Feed conveyor speed ft/min 0.3048 m/min 45 13

Main conveyor width in 0.0254 mm 30 750Main conveyor height (ctr) ft 0.3048 mm 13' 11" 4.24Main conveyor angle o to o 24ºMain conveyor speed ft/min 0.3048 m/min 306 93

Product conveyor width in 0.0254 mm 30 750Product conveyor height (ctr) ft 0.3048 mm 12' 7" 3.8Product conveyor angle o 1.0000 o 24ºProduct conveyor speed ft/min 0.3048 m/min 345 105

Wing conveyor width in 0.0254 mm 24 600Wing conveyor height (ctr) @25o ft 0.3048 mm 14' 3" 4.34Wing conveyor angle o 1.0000 o 20º and 25ºWing conveyor #1 speed (var) ft/min 0.3048 m/min 156 47Wing conveyor #2 speed (fixed) ft/min 0.3048 m/min 180 54

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

UNITS SW348English Conv. (x) Metric English Metric

Screen Box / Shakerhead:Screen box type 4 BRG# Decks 2Screen angle o to o 30ºScreen speed rpm to rpm 1175 +/- 25Screen eccentric (circle size) in 25.40 mm 0.25 6.4Screen box size (nominal) ft 0.3048 mm 8' x 4' 2.4 x 1.2Screen area ft2 0.0929 m2 32 2.88Impact Shredder-Hammermillspeed

rpm 629

Engine: (Motor)Standard Manufacturer / Model Deutz, F4L1011Type / # cylinders Air Cooled, 4 cyl, dieselMax. Highly Intermittent power hp @ rpm 56 hp @ 2800 rpmMax. Highly Intermittent power kW @ rpm 42 kW @ 2800 rpmPower @ operating RPM hp @ rpm 50 hp @ 2315 rpmPower @ operating RPM kW @ rpm 37 kW @ 2315 rpmOperational speed rpm 2315

Operational Specifications:Overall length (working) ft 0.3048 mm 50' 6" 15.39Overall height (working) ft 0.3048 mm 14' 3" 4.34Overall width (working) ft 0.3048 mm 43' 6" 13.25Fuel tank capacity gal 3.7850 L 37 140Hydraulic tank capacity gal 3.7850 L 109 412Transport Specifications:Towing arrangement 5th WheelBrakes Air

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

UNITS SW348English Conv. (x) Metric English Metric

# Axles 2Overall width (Transport Mode) ft 0.3048 mm 8' 2" 2.49Overall height (Transport Mode) ft 0.3048 mm 13' 0" 3.97Overall length (Transport Mode) ft 0.3048 mm 42' 6" 12.95Length axle (ctr) to end(Transport)

ft 0.3048 mm 10’ 2” 3.09

Length 5th wheel to end(Transport Mode)

ft 0.3048 mm 40' 3" 12.26

Overall weight lb 0.4536 kg 30,473 13,820Tongue weight lb 0.4536 kg 8,114 3,680Axle weight lb 0.4536 kg 22,359 10,140

Relief valve settings:Stage 1 valve bank PSI 0.0689 bar 3190 220Stage 2 valve bank PSI 0.0689 bar 3190 220

Due to the Metso Minerals pollicies of continued product improvements, specificationsare subject to change without notice or obligation. No representation is made that theproducts depicted herein comply with any laws, codes, rules, regulations or standards.Compliance is the responsibility of the user. Additional safety equipment may berequired by the particular location and application of product.

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

Nordberg SW348 Side View in WorkingPosition:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

Nordberg SW348 End View in Working Position:

Nordberg SW348 Sales Presentation

© Metso Minerals, Inc. 2003

Nordberg SW348 Side View in TransportPosition:

Nordberg SW348 Sales Presentation