38 www.vectorelect.com 800-423-5659Specification subject to change without notice

Front PanelsScrew-mounted front panel kits include handle and identification panel. Available in 3U, 6U and 9U heights and in three widths: 4HP (0.788”),8HP (1.588”) and 12HP (2.388”). All mounting hardware, including board mounting support bracket and hardware also included. Brushedaluminum panel with clear irridite plating matches standard finish for Vector packaging products.

Non EMC DIN-Based VectorPaktmSubracksN

on E

MC

Subr

acks

Type V, 3U Fixed Handle Style

3U X 4HP3U X 8HP3U X 12HP6U X 4HP6U X 8HP6U X 12HP9U X 4HP9U X 8HP9U X 12HP

5.06” 5.06” 5.06”10.31” 10.31” 10.31”15.56”15.56”15.56”

0.788”1.588” 2.388”0.788”1.588”2.388”0.788” 1.588”2.388”

FPE04-3UFPE08-3UFPE12-3UFPE04-6UFPE08-6UFPE12-6UFPE04-9UFPE08-9UFPE12-9U

N/A N/A N/A

5.25”5.25”5.25”5.25”5.25”5.25”

N/A N/A N/A

3.50”3.50”3.50”3.50”3.50”3.50”

Front Panels, Ejector Style, Type I, II

Front Panels, Fixed Handle Style, Type V

Part # DESCRIPTION A B DC

-Add suffix “B” to part # for panels without center brackets mounting, e.g. FPE04-6UB

3U X 4HP3U X 8HP3U X 12HP6U X 4HP6U X 8HP6U X 12HP9U X 4HP9U X 8HP9U X 12HP

5.06” 5.06” 5.06”10.31” 10.31” 10.31”15.56”15.56”15.56”

0.788”1.588” 2.388”0.788”1.588”2.388”0.788” 1.588”2.388”

FP04-3UFP08-3UFP12-3UFP04-6UFP08-6UFP12-6UFP04-9UFP08-9UFP12-9U

Part # DESCRIPTION A B

-Fixed Handle Style front panel kit includes upper and lower handles (lower only on 3U versions)that extend across the full width of the panel

CATALOG 128_CATALOG 128.qxd 4/24/2014 10:14 AM Page 38

Whether you need standard panels,modified, or custom front panels, wehave manufacturing capabilities tosupport your needs. VectorElectronics’s custom aluminum frontpanels offer a wide range of designopportunities. Cost effective punch-ing for volume production.

Customization :• Panel cutouts• Silkscreening• Powder coating• Special Finishing

39www.vectorelect.com 800-423-5659

Filler Panels/Blank-off PlatesFeatures

• Covers unused slots• Improves air flow• Mounting hardware

included

U

369

Part Number4HP

5231304-075261304-075291304-07

Part Number8HP

5231308-075261308-075291308-07

Part Number12HP

5231312-075261312-075291312-07

Typical slot width is 0.800” (4HP)Material: 6063T5, extrudedbrushed Aluminum with clearIrridite finish.

Each Filler Panel Kit Includes4,8 or 12HP panel (0.8”, 1.6” or 2.4”)M2.5 Nickel plated mounting screws with ‘captive’sleeves

Standard Filler Panels

95000002B

94300008

Captive sleeves/screwsare included with allVectorPaktm filler panelsand also sold separatelyin a hardware kit:

P/N HD99-1Includes QtyBlack plastic sleeve 48M2.5 x 11 mm,nickel 48plated steel screw

Non EMC DIN-Based VectorPaktmSubracksN

on EMC

Subracks

Custom Front Panels

CATALOG 128_CATALOG 128.qxd 4/25/2014 9:31 AM Page 39

Plastic Handle

ID Plate

M2.5 x 0.45Hex Nut

PC Board

M2.5 x 10Filister Head Screw

Retainer Sleeve

M2.5 x 11Captive Screw

M2.5 x 8 FlatHead Screw

'L' Brackets

M2.5 x 16Filister Head Screw

www.vectorelect.comPHONE : (818)985-8208 FAX : (818)985-7708

11115, VANOWEN STREET, NORTH HOLLYWOOD, CA-91605

3U-8HP

'L' Bracket Detail

Washer

Optional for 6U & 9UHigh Panel

VECTOR P/N# HD102

6U-8HP

.645

.170

.372

.340.277

.285

.454

.240

.600

.630

A

B2 x.123

2 x.123

2 x.294

2 x.294

Top Handleonly for 6U & 9U

.110 x .150OBROUND

4HP Handle

8HP Handle

12HP ID Plate

Shown 12HP Bottom Handle

Configuration

4 HP = .760

8 HP = 1.560

4HP + 8HP

(2.360)

IN349C

TOLERANCE : .XXX .010ALL DIMENSIONS ARE IN INCHES

12HP =

B

Ejector Knob

ID Plate

Captive Screw

Retainer Sleeve

'L' - BracketPC Board

Front Panel

IN399

0.075

0.1200.235

0.559

0.945

0.4650.563

0.174 THRU

R 0.170

0.150 RAD.

1.090

0.164

0.176

0.439

0.779

0.080

0.200 x 0.200 CUTOUT

0.427

0.325

0.509

0.166

0.159

0.222

0.2570.586

0.237

0.1700.311

Phone: (818) 985-8208 Fax: (818) 985-770811115 Vanowen Street, North Hollywood,CA 91605

FPE04-6U PANEL WILL HAVE TWO CENTER HOLES FOR OPTIONAL 3U 'L' BRACKETS.ORDER FPE04-6UB FOR PANEL WITHOUT THE CENTER HOLES.