User Guide

Issue No.1 Printed in Canada

9353205

Nokia Products Ltd.575 Westney Rd. SouthAjax, Ontario L1S 4N7

www.nokia.ca

497397 5125 Cdn UsrGd 2/21/01 4:51 PM Page 1

Keys

Menu

Navi™ key See p. 6. Scroll keys

See p. 6.

Emergency 9 keySee p. 25.

Voice mail keySee p. 23.

Number keysSee p. 11.

Fixed-length antennaSee p. 14.

Do not attempt to extend or remove!

EarpieceSee p. 15.

ScreenCurrent function of Navi™ key

Clear key

See p. 7.

Power keySee p. 6.

Menu

Indicators and iconsYou have an active call.

You have one or more new voice messages.

You have one or more new text messages.

Keyguard is on. Your phone will not accept any keypresses. To turn it off, press Unlock, then .

The alarm clock is set.

The ringing option is set to Silent.

Digital service is available.

Your phone is roaming outside its home system.

The phone is ready for you to enter a response.

Characters entered will be upper-case letters. Press the key to switch letter case.

Characters entered will be lower-case letters. Press the key to switch letter case.

Characters entered will be numbers. (When entering letters, switch to numbers by pressing and holding the key.)

You are in “special character” mode; select a character, then press Use. (When entering letters, switch to special characters by pressing the

key.)

Table of contents1. For your safety . . . . . . . . . . . . . . . . . . 1

FCC/Industry Canada Notice . . . . . . . . . . . . . . . . 2Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2. Battery installation and charging . . . . . 3Attaching the battery . . . . . . . . . . . . . . . . . . . . . . 3Battery charging . . . . . . . . . . . . . . . . . . . . . . . . . . 3Removing the battery . . . . . . . . . . . . . . . . . . . . . . 4Important battery information. . . . . . . . . . . . . . . 5

3. About the phone, keys and menu . . . . . 6Power key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Nokia Navi™ key . . . . . . . . . . . . . . . . . . . . . . . . . . 6Scroll keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Clear key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7External antenna jack . . . . . . . . . . . . . . . . . . . . . . 7Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Entering letters and numbers. . . . . . . . . . . . . . . 11

Special characters in names . . . . . . . . . . . . . .12Special characters in phone numbers . . . . . .12

Keyguard (locking the keypad) . . . . . . . . . . . . . .134. Basic functions . . . . . . . . . . . . . . . . . 14

Turning the phone on or off . . . . . . . . . . . . . . . .14About the antenna . . . . . . . . . . . . . . . . . . . . . . .14Checking signal strength . . . . . . . . . . . . . . . . . .14Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Volume adjustment (earpiece) . . . . . . . . . . . . . .15Muting the microphone . . . . . . . . . . . . . . . . . . .15Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Last number redial . . . . . . . . . . . . . . . . . . . . . . .15Saving a name and number . . . . . . . . . . . . . . . .15Finding a name and number . . . . . . . . . . . . . . .16Answering a call . . . . . . . . . . . . . . . . . . . . . . . . .16Silencing an incoming call . . . . . . . . . . . . . . . . .16

i

5. Settings . . . . . . . . . . . . . . . . . . . . . . 17Automatic redial . . . . . . . . . . . . . . . . . . . . . . . . .17Calling card set-up . . . . . . . . . . . . . . . . . . . . . . .17Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Time update from the network . . . . . . . . . . . . .19Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Quick alert settings . . . . . . . . . . . . . . . . . . . . .22Voice mailbox number . . . . . . . . . . . . . . . . . . . .23Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . .23

6. Emergency calls . . . . . . . . . . . . . . . . 24Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . .25

7. Advanced functions . . . . . . . . . . . . . 26Network feature setting . . . . . . . . . . . . . . . . . . .26

Adding feature activation codes to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .26Adding feature cancellation codes to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .26

In-call menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Making/receiving multiple calls . . . . . . . . . . . . .27Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . .29Digital/analog selection . . . . . . . . . . . . . . . . . . .301-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . .30Choosing your phone number (NAM selection). . . . . . . . . . . . . . . . . . . . . . . . . .31Send own number . . . . . . . . . . . . . . . . . . . . . . . .31Calling card calls . . . . . . . . . . . . . . . . . . . . . . . . .32System selection . . . . . . . . . . . . . . . . . . . . . . . . .32

Public system selection . . . . . . . . . . . . . . . . . .33Automatic answer . . . . . . . . . . . . . . . . . . . . . . . .34Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Restore factory settings . . . . . . . . . . . . . . . . . . .35

ii

8. Phone book . . . . . . . . . . . . . . . . . . . 36Saving names and numbers . . . . . . . . . . . . . . . .36Finding names and numbers . . . . . . . . . . . . . . .37Editing names and numbers . . . . . . . . . . . . . . . .38Erasing names and numbers. . . . . . . . . . . . . . . .38Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . .38Checking available memory . . . . . . . . . . . . . . . .38

9. Call log . . . . . . . . . . . . . . . . . . . . . . 39Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . .40Dialed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40Clearing call lists . . . . . . . . . . . . . . . . . . . . . . . . .40Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

10. Voice messages . . . . . . . . . . . . . . . . . 42Saving your voice mailbox number . . . . . . . . . .42Listening to new voice messages. . . . . . . . . . . .42Calling your voice mailbox at any time. . . . . . .42

11. Text messages . . . . . . . . . . . . . . . . . 43Reading messages . . . . . . . . . . . . . . . . . . . . . . . .43Storage of incoming messages . . . . . . . . . . . . .44Erasing all text messages . . . . . . . . . . . . . . . . . .45Writing and sending text messages. . . . . . . . . .45Forwarding and replying to a message . . . . . . .46Sending and receiving business cards . . . . . . . .47

12. E-mail messages . . . . . . . . . . . . . . . . 49Saving e-mail addresses . . . . . . . . . . . . . . . . . . .49Sending e-mail messages . . . . . . . . . . . . . . . . . .50Forwarding and replying to e-mail messages . . 51

13. Extra features . . . . . . . . . . . . . . . . . 52Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Downloading ringing tones . . . . . . . . . . . . . . . .53Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Prepaid service. . . . . . . . . . . . . . . . . . . . . . . . . . .55

iii

14. Security features . . . . . . . . . . . . . . . 56Access codes overview . . . . . . . . . . . . . . . . . . . .56

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Security code . . . . . . . . . . . . . . . . . . . . . . . . . .56

Restricting calls . . . . . . . . . . . . . . . . . . . . . . . . . .56Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

15. Accessories . . . . . . . . . . . . . . . . . . . 60Nokia Xpress-on™ colour covers . . . . . . . . . . . .60Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Chargers and other accessories . . . . . . . . . . . . .63

16. Reference information . . . . . . . . . . . 67Important safety information. . . . . . . . . . . . . . .67Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . .69Radio frequency (RF) signals . . . . . . . . . . . . . . .70Care and maintenance . . . . . . . . . . . . . . . . . . . . 71

17. Technical information . . . . . . . . . . . . 7218. Nokia 1-Year Limited Warranty . . . . . 7319. Index . . . . . . . . . . . . . . . . . . . . . . . . 76

iv

1. For your safetyRead these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.

Road Safety Comes FirstDo not use a hand-held phone while driving; park the vehicle first.

Switch Off In HospitalsFollow any regulations or rules. Switch phone off near medical equipment.

Switch Off On AircraftWireless phones can cause interference. Using them on aircraft is illegal.

Switch Off When RefuelingDo not use phone at a refueling point. Do not use near fuel or chemicals.

Switch Off Near BlastingDo not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

InterferenceAll wireless phones may get interference which could affect performance.

Use SensiblyUse only in the normal position (to ear). Do not touch the antenna unnecessarily.

Qualified ServiceOnly qualified service personnel must install or repair equipment.

Accessories and BatteriesUse only approved accessories and batteries. Do not connect incompatible products.

1

FCC/Industry Canada NoticeYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this GuideThe wireless phone described in this guide is approved for use in TDMA and AMPS networks.

Network servicesA number of features included in this guide are called network services. They are special services provided by wireless service providers. Before you can take advantage of any of these network services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.

UpdatesThe latest version of this User Guide may be found on Nokia’s World Wide Web site at www.nokia.ca.

2

2. Battery installation and chargingBefore you can use your new phone, you need to attach and charge the battery.

Attaching the batteryTo attach the battery, place it on the back of the phone as shown and slide it toward the top of the phone until it clicks into place.

Battery chargingYour phone is powered by a rechargeable NiMH or Li-Ion battery. Note that a new NiMH battery’s full performance is achieved only after two or three complete charge and discharge cycles. For charging times, see ‘Charging times’ on page 62.

How to charge your batteryConnect the lead from the charger to the bottom of your phone or to a charging stand. Then plug the charger into a standard wall outlet.

When the battery is charging, the battery strength indicator on the right side of the display scrolls.

Note: When you charge the battery for the first time, the battery strength indicator will not scroll the entire time; this is normal.

Problems chargingIf your phone displays Not charging, charging is suspended. Check that the battery is connected to an approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating state. If charging still fails, contact your dealer.

3

When is charging complete?When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if you leave your phone connected to the charger.

When is a good time to charge?You can charge anytime, but remember that when your phone displays Battery low, you only have a couple of minutes of talk time left.

Can I make calls while charging?Yes, but depending on the charger used, your battery may not charge during a call.

Discharging NiMH batteriesFor good operation times, discharge NiMH batteries from time to time by leaving your phone switched on until it turns itself off (or by using the battery discharge facility of any approved accessory available for your phone). Do not attempt to discharge the battery by any other means.

Removing the batteryNote: Switch off the phone before removing the battery!

1 Press and hold the button at the top of the battery.

2 Slide the battery toward the bottom of the phone.

3 Lift the battery off the phone.

4

Important battery information• The battery can be charged and discharged hundreds of times

but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer.

• When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.

• Temperature extremes will affect the ability of your battery to charge: allow it to cool down or warm up first.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or worn out.

• Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries performance is particularly limited in temperatures below 14º F (-10º C). Li-Ion batteries performance is particularly limited in temperatures below 32º F (0º C).

• Do not dispose of batteries in a fire!

• Dispose of used batteries in accordance with any local regulations.

5

3. About the phone, keys and menu

Power keyYou can use the power key to:

• turn the phone on or off (press and hold)

• turn the phone’s lights on for 15 seconds

• select a quick alert setting (see page 22) (if Keyguard is off and the phone is not connected to a headset or handsfree car kit)

• silence the ringing of an incoming call

Nokia Navi™ keyYour phone’s Navi™ key appears below the display. Its current function is indicated by the word that appears above it (for example, Menu). Simply press the Navi™ key to perform the function.

Throughout this guide, when you see “press Menu,” “press Listen,” etc., press the Navi™ key when that word appears above it.

Scroll keysThe scroll keys are located to the right of the Navi™ key. Use the scroll keys to:

• browse menus

• move the cursor (see page 11) to the right or the left

• adjust the earpiece volume while in a call

• access your phone book (press from the start screen)

• access the dialed calls list (press from the start screen)

6

Clear keyUse the clear key to:

• delete a character to the left of the cursor

• clear all characters from the display (press and hold)

• return to the previous menu level

• return from the menu to the start screen (press and hold)

• access the in-call menu while in a call

LightsTo turn your phone’s lights on for 15 seconds:

• if Keyguard is off, press any key

• if Keyguard is on, you must press the key briefly (this conserves battery power by keeping the lights from turning on when the phone is in a pocket or purse)

For information about controlling your phone’s lights when the phone is in a car kit, see page 19.

External antenna jackAt the back of the phone, below the antenna, there is a connector for an external antenna. The connector may be protected by a rubber cap. Remove the cap before connecting an external antenna. After removing the antenna, replace the cap.

Note: Keep the cap out of the reach of small children.

Start screenThe start screen appears when you first turn on your phone. Menu appears above the Navi™ key so you can access your phone’s menu. Several features can be used only when the phone is at the start screen.

To get to the start screen, press and hold for a second. (If there are characters on the display this clears the characters, then you must press and hold again.)

7

MenuYour phone’s menu allows you to easily access the many powerful features in your phone.

Scroll barWhen you use your phone’s menu, a scroll bar appears at the far right of the screen. This bar indicates where you are in the menu; each tab location on the bar represents a different menu item.

For example, press Menu once. The scroll bar appears with the first (top) tab displayed. A different tab appears each time you press one of the scroll keys .

Help textMany menu items have brief help text. To view the help text, scroll to the menu item and wait for about 10 seconds for the text to appear. Press More or to see the next page of text, to see the previous page, or to return to the menu.

8

Menu shortcutsWhen you select a menu item, numbers appear on the display above the scroll bar. If you become familiar with these numbers, you can use them as shortcuts for accessing different menu items. For example, to access the Phone settings menu, you can simply press Menu 4 2. The phone displays the first item in that menu, Touch tones.

Note: (1) Menu items in your phone vary depending on the network and accessories used. (2) This is not a complete list; see entries about individual features for more information.

1 Phone book11 Search

12 Add new

13 Edit

14 Erase141 One by one142 Erase all

15 Options151 Scrolling view152 Memory status

16 1-touch dialing

17 Send bus. card

2 Messages21 Text messages

211 Inbox212 Saved213 Write message214 Write e-mail215 Outbox216 Erase all

22 Voice messages221 Listen to voice

messages222 Voice mailbox

number

23 Welcome note

3 Call log31 Missed calls

32 Received calls

33 Dialed calls

34 Clear call lists341 All342 Missed343 Received344 Dialed

35 Call timers351 Last call352 All calls353 Life timer354 Clear timers

4 Settings41 Call settings

411 Emergency key 9412 Automatic redial413 Calling card414 Automatic answerh

42 Phone settings421 Touch tones422 Language423 Restore factory

settings424 Lightsc

9

10

43 Security settings431 Restrict calls432 Access codes

44 Network Services441 Digital/analog

selection442 Public system

selection443 Voice privacy444 Network feature

setting445 Call forwardingm

446 Call watingm

447 Send own numberm

45 Own number selection

5 System51 Automatic52 Manual53 New search

6 Games61 Memory62 Snake63 Logic

7 Clock71 Alarm clock72 Clock settings

721 Display/Hide clock722 Adjust time723 Time format

73 Auto update of time731 On732 Confirm first733 Off

8 My tones81 Ringing options

811 Ring812 Ascending813 Ring once814 Beep once815 Silent

82 Ringing tone(30 tones)

83 Ringing volume831 Level 1832 Level 2833 Level 3834 Level 4835 Level 5

84 Message alert tone841 No tone842 Standard843 Special844 Beep once845 Long & loud

85 Keypad tones851 Off852 Level 1853 Level 2854 Level 3

86 Warning and game tones861 On862 Off

87 Vibrating alertv

871 On872 Off

9 Keyguard

Prepaidp

c Visible only when used with car kith Visible only when used with headset or car kitmMust be added to the menu manually; see ‘Network feature setting’ on page 26v Visible only when vibrating battery is attachedp Visible only when Prepaid menu activated

11

Entering letters and numbersCursorThe cursor is a blinking vertical line that appears on the screen when you are entering text or numbers. Characters you enter appear to the right of the cursor. Pressing the key deletes the character to the left of the cursor. Use the scroll keys to move the cursor to the right or left .

ABC modeWhen your phone is ready for you to enter text, such as a name or message, it switches to ABC mode. The icon shows that it is in ABC mode.

When is displayed, you can enter these characters by pressing the indicated key repeatedly:

Changing letter casePress the key to switch between upper- and lower-case letters. The icon switches to to indicate that you are using lower case.

Entering numbersTo enter numbers while in ABC mode, you can:

• press and hold the corresponding key until the number appears, or

• switch between ABC mode and number mode by pressing and holding the key.

Key Characters Key Characters

1 . , ‘ ? ! @- 1 7 PQRS7

2 ABC2 8 TUV8

3 DEF3 9 WXYZ9

4 GHI4 space, 0

5 JKL5 See ‘Special characters in names’ on page 12.

6 MNO6 Changes letter case,switches between letters and numbers

Special characters in namesIn ABC mode you can press the key to view the special characters below. You can use these characters when saving names in your phone book. Simply press or to highlight the one you want, then press Use.

. , @ ? ! : ; - + # * ( ) ‘ “ _ & $ % / < > =

Tip: To choose a character that appears near the end of the list, immediately press to go to the end of the list.

Special characters in phone numbersYou can use special characters to dial or save phone numbers of automated services such as bank account information. When entering numbers, press the key repeatedly until you see the character you want.

Character Use

* This character is used to request services from the network. Contact your service provider for details.

+ This character is not currently used.

p This character creates a pause. Digits to the right of the p are sent as touch tones after a 2.5-second pause.

Use this character to save phone numbers of automated services that require you to enter a password or other information after the call is answered. For example, if your voice mail number at work is 555-1212 and you need to enter your extension (1234) and then a password (5678) in order to listen to your messages, you could save this phone number as 5551212p1234p5678.

w This character creates a wait. It works similarly to the pause character except that digits to the right of the w are not sent until you press Send.

12

Keyguard (locking the keypad)The Keyguard feature allows you to lock your phone’s keypad so that accidental keypresses have no effect. This is handy when your phone is in a pocket or purse.

Note: Keyguard is not a security feature and will not prevent unauthorized use of your phone.

For more information, see ‘Emergency calls’ on page 24 and ‘Emergency key 9’ on page 25.

To lock the keysPress Menu 9 or Menu .

To unlock the keysPress Unlock .

Notes about Keyguard• When Keyguard is on, the only way to answer a call is to

press Answer.

• When Keyguard is on, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). However, one-touch emergency dialing (‘emergency key 9’) does not operate.

• Keyguard is automatically turned off when the phone is connected to a car kit.

• Keyguard menu is replaced by Prepaid menu when Prepaid is activated. Keyguard function is available.

13

4. Basic functions

Turning the phone on or offPress and hold the key for one second.

Note: If the phone asks for a lock code, see ‘Lock code’ on page 56. If the phone asks for a security code, see ‘Security code’ on page 56.

WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

About the antennaYour Nokia phone has a fixed-length antenna. Do not attempt to extend or remove it.

Normal positionHold the phone as you would any other telephone, with the antenna pointed up and over your shoulder.

Tips on efficient operationAs with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Checking signal strengthYour phone operates on radio waves. Radio signal coverage is maintained by a wireless network, and the quality of calls on your phone depends on the strength of the wireless radio signal.

Get a strong signalWhen you are at the start screen (see page 7) or in a call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators scroll as the signal strength increases and decreases.

To improve your phone’s reception, try moving your phone slightly. If you are inside a building, move toward a window.

14

Making a call1 Enter the area code and phone

number. (Menu changes to Call.)

2 Press Call and wait for the other party to answer.

Volume adjustment (earpiece)To adjust the earpiece volume, press or during a call. If an accessory with its own loudspeaker is connected to your phone, the scroll keys will adjust the volume for that accessory.

Muting the microphoneWhen you are in a call, you can mute the phone’s microphone by pressing , pressing Options, and selecting Mute. To unmute the microphone, press , press Options, and select Unmute.

Note: For more information about the in-call menu, see page 27.

Ending a callPress End.

Last number redialThe last 10 numbers you dialed are stored in the dialed calls list. Use this list to redial a number you have called recently.

1 From the start screen, press to access the dialed calls list.

2 Scroll to the desired number.

3 Press Call.

Saving a name and numberSee ‘Saving names and numbers’ on page 36.

15

Finding a name and number1 Press to access your phone book.

2 Scroll to the number you want. (To skip ahead quickly in the list, press the number key that corresponds to the first letter of the name.)

3 Press Call.

For other ways to find names and numbers, see ‘Finding names and numbers’ on page 37.

Answering a callWhen someone calls, the phone will alert you (see ‘Tones’ on page 20) and Call will flash on the display. To answer the call, press any key except .

Note: To prevent accidental answering when the phone is in a pocket or purse, the phone will not answer the call if you press the key for longer than one second.

For information on setting your phone to answer incoming calls automatically, see ‘Automatic answer’ on page 34.

Caller IDCaller ID is a network service that can display the name and phone number of the person calling you, if the information is available. Contact your service provider for details.

If the caller can be identified, the phone may display the caller's name and phone number. The information displayed depends on the information available through the network and your phone book. It is possible that only the name or the number will appear.

Call - caller ID unavailable will display when the wireless network does not recognize the calling number. Also, Call - caller ID blocked may display if the calling party has blocked caller ID.

Silencing an incoming callTo silence the ringing of an incoming call, press briefly.

16

5. SettingsThis section describes some phone settings that allow you to customize your phone to suit your preferences and that you probably will not change very often.

Automatic redialUse Menu 4 1 2 to turn this feature on or off. When this feature is on and the wireless network is busy, your phone will redial a number up to three times. This feature will not redial to a busy phone number.

To stop the call attempts, press Quit or .

Calling card set-upIf you wish to use a calling card for long distance calls, you must first save your calling card information into your phone. Your phone can save information about two calling cards.

To learn how to make calling card calls, see ‘Calling card calls’ on page 32.

For more information on Prepaid services, see page 55.

Saving calling card information1 Press Menu 4 1 3.

2 Scroll to the desired calling card, then press Options.

3 Scroll to Edit, then press OK.

4 Enter your security code (see page 56), then press OK.

5 At Dialing sequence, press Select. Press to choose the dialing sequence your card uses, then press Select.

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

6 Enter access number (usually the 1-800 number listed on the back of the calling card), then press OK.

7 Enter your card number and/or PIN, then press OK. Your phone will display Save changes? Press OK.

17

8 Press to reach Card name, then press Select. Enter the card name using your phone’s keypad, then press OK.

Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.

Choosing a calling card to useTo select a calling card to use, press Menu 4 1 3, scroll to the card you want, then press Options. Select is highlighted; press OK. Enter your security code, then press OK.

ClockYour phone has an internal clock that can be displayed on the start screen. The clock must be set in order for call times to be recorded (see ‘Call log’ on page 39).

If you remove the battery for longer than a couple of seconds, the time will be lost. The next time you turn on the phone, you will be asked to enter the time.

For more information on automatic time update of the clock in your phone, see page 19.

Selecting time formatUse Menu 7 2 3 to set the clock’s format to 24-hour or am/pm.

Setting the timeUse Menu 7 2 2 to enter the current time. Use two digits for both hours and minutes (for example, enter 1:30 as 0130). If the clock’s time format is set to am/pm, you will be asked to choose am or pm.

Note: The key does not work on this screen. If you make a mistake, re-enter all four digits.

18

Displaying or hiding the clockPress Menu 7 2 1 to display the clock on the phone’s screen if it is currently hidden, or vice versa.

When the clock is displayed and the time format is set to am/pm, a black square will appear next to the time indicating a.m. or p.m.

LanguageUse Menu 4 2 2 to set the language of your phone’s display. You can choose from English, French, Spanish, Portuguese, Russian and Hebrew.

The shortcut for choosing English is to press Menu 4 2 2 1.

LightsIf you are using your phone with a car kit, use Menu 4 2 4 to set your phone’s lights to On (lights stay on) or Automatic (after 15 seconds, lights turn off until the next key is pressed, phone rings, etc.).

For information about turning your phone’s lights on at any time, see page 7.

Time update from the networkThis feature updates your phone’s built-in clock from the network. The phone can update its internal time if the time on your phone is 2 minutes off or more the network time.

The feature is network dependent. Contact your service provider for details.

Turning on automatic time updateWhen you turn on the automatic time update, the phone automatically updates the time from the network when you turn the phone on.

Note: You need display the clock on the phone’s screen before you turn on the automatic time update (see ‘Clock’ on page 18).

• Press Menu 7 3 1 to turn on the automatic time update.

03:1503:15

3:15 a.m. 3:15 p.m.

19

Turning on confirm first with time update When you turn on confirm first with the time update, your phone asks for a confirmation before it updates the internal time from the network. You can choose to accept or decline the update.

Note: You need display the clock on the phone’s screen before you turn on the automatic time update (see ‘Clock’ on page 18).

• Press Menu 7 3 2 to turn on confirm first with time update.

Turning off the time updateWhen you turn off the time update, the phone does not update its internal time from the network. Instead, the phone uses the time you have set. You need to set the time manually.

• Press Menu 7 3 3 to turn off the time update.

• Press Menu 7 2 2 to set the time on your phone.

TonesUse Menu 8, My tones, to change the six sound settings in your phone: ringing option, ringing tone, ringing volume, message alert tone, keypad tones, and warning and game tones.

The quick alert settings feature (see page 22) allows you to select a fixed combination of these settings to suit your current environment.

Ringing optionUse Menu 8 1 to tell your phone how to notify you that you have a call.

Note: If you choose Beep once or Silent, the alarm clock will only sound a quiet beep.

Ring The phone rings normally using the currently selected ringing tone.

Ascending The phone rings using the currently selected ringing tone. The ringing volume starts low and increases with successive rings.

Ring once The phone rings once using the currently selected ringing tone.

20

21

Beep once The phone beeps once.

Silent The phone makes no sound when you receive a call. The icon appears at the start screen.

Ringing toneYour phone plays a ringing tone when someone calls you and the ringing option is set to Ring, Ascending, or Ring once. Use Menu 8 2 to choose one of 30 ringing tones. Scroll to a tone to hear how it sounds.

Note: If the ringing option is set to Silent or Beep once, the phone will not play sample tones.

For more information on downloading ringing tones, see page 53.

Ringing volumeUse Menu 8 3 to control the volume of your phone’s ringing and of message alert tones.

Note: If your phone does not ring loudly enough at maximum volume, try a different ringing tone; some tones are louder than others.

Message alert toneUse Menu 8 4 to choose the tone played when you receive a text message. Scroll to a tone to hear how it sounds.

Keypad tonesUse Menu 8 5 to adjust the volume of the tones your phone makes when you press its keys.

Warning and game tonesUse Menu 8 6 to turn your phone’s warning and game tones on or off. Warning tones are created by events such as confirmations, errors, power on, battery low, and recharge battery.

Vibrating alertIf your phone has a vibrating battery attached, use Menu 8 7 to set your phone to vibrate when you receive a voice call. If you turn vibrating alert on, your phone will vibrate even if its ringing option is set to Silent.

Note: The vibrating battery does not vibrate when your phone is connected to or placed in any charging device.

Quick alert settingsYou can quickly adjust your phone’s sound settings when you go into a meeting, go outdoors, etc. To choose a quick alert setting, briefly press the key, scroll to the setting you want, then press OK.

Tip: Instead of using the scroll keys, you can press the key repeatedly to scroll through this menu. After you reach the setting you want, press and hold the key.

Note: If you choose Silent or Quiet, the alarm clock will only sound a quiet beep.

My tones Uses the settings you have made in Menu 8, My tones.

Silent All sound is turned off.

Quiet Your phone beeps once when you receive a call or text message. Other tones are turned off.

Loud Your phone rings loudly. Other tones are not affected.

Headset Automatically selected when your phone is connected to a headset. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a headset.

Car Automatically selected when your phone is connected to a car kit. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a car kit.

Note: If the Silent, Quiet, or Loud quick alert setting is chosen and you change a setting in Menu 8, My tones, the phone switches the current quick alert setting to My tones.

22

Voice mailbox numberIf you have a voice mail subscription, use Menu 2 2 2 to save the voice mailbox number given to you by your service provider. This number may be up to 32 digits long. Once you save your voice mailbox number, you can press and hold the key to dial your voice mailbox. (You can also press briefly and then press Call.)

Note: For more information on voice mail, see “Voice messages” on page 42.

Voice privacyAvailable only in digital networks, voice privacy encrypts the voice channel so it is more difficult for anyone to eavesdrop on your conversations. Use Menu 4 4 1 to turn voice privacy on or off.

This feature may not be available in all areas; contact your service provider for details. If voice privacy becomes inactive, the phone beeps and displays Voice privacy not active.

Welcome noteUse Menu 2 3 to create or change the welcome note for your phone. This note is displayed briefly each time you turn on your phone. It can be your name, a reminder, etc. To save the note, press Options, then Save. To erase the note, press Options, then Erase.

23

6. Emergency calls

1 If the phone is not on, switch it on.

2 Press and hold the key for several seconds to ready the phone for calls.

3 Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location.

4 Press Call.

IMPORTANT!

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

If certain features are in use (Keyguard, call restrictions, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local wireless service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

24

Emergency key 9Use Menu 4 1 1 to turn on this feature. When this feature is on, the phone attempts to make an emergency call when you:

• press and hold the 9 key, or

• press 9, then press Call.

Note: When Keyguard is active, the only way to make an emergency call is to dial the emergency number, then press Call.

Note: Official emergency numbers (for example, 911) vary by location. Only one number is dialed automatically by Emergency Key 9, and it might not be the proper number in all circumstances.

IMPORTANT!Emergency response teams are required to respond to all emergency calls they receive, whether the caller is able to speak to the dispatcher or not. Accidental dialing of 911 may prevent an emergency team from responding to an actual emergency.

When your phone is not in use, please activate Keyguard, especially if the Emergency key 9 feature is enabled.

25

7. Advanced functions

Network feature settingCall forwarding, call waiting, and send own number are network services available through your service provider. These features do not appear in your phone’s Network services menu until you save the related feature code(s) given to you by your service provider. After you save the feature activation or cancellation code, the feature appears in the phone’s menu and you can use the menu to turn the feature on or off.

Note: Feature codes can be saved only when your primary phone number (NAM 1) is selected. See page 31.

Adding feature activation codes to the menuTo save a feature activation code, press Menu 4 4 4. At the Feature code prompt, enter the feature activation code, then press OK. Scroll to the feature that the code applies to, then press Select. (If the feature is call forwarding, choose one of the four types of call forwarding.) Finally, scroll to Activate, then press OK.

Activate will now appear in the menu for that feature.

Adding feature cancellation codes to the menuTo save a feature cancellation code, press Menu 4 4 4. At the Feature code prompt, enter the feature cancellation code, then press OK. Scroll to the feature that the code applies to, then press Select. (If the feature is call forwarding, choose one of the four types of call forwarding.) Finally, scroll to Cancel, then press OK.

Cancel will now appear in the menu for that feature.

26

In-call menuWhen you are in a call, the function of the Navi™ key is End. However, your phone has an in-call menu that allows you to perform several functions while in a call. To use the in-call menu, press while you are in a call, then press Options. Press to scroll to the first item in the menu, or

to scroll to the last item in the menu.

The in-call menu is:

Making/receiving multiple calls

Making a new outgoing callWhile you are in a call, select New call from the in-call menu. Enter the number (or press Search to locate the number in the phone book), then press Call. The first call is automatically put on hold while you are in your new call.

Note: This feature might not be supported in your network. Contact your service provider for details.

Three-way callingNote: This feature might not be supported in your network or might work differently than described. For more information, contact your service provider.

To create a three-way call, call the first person. Then select New call from the in-call menu, enter or find the phone number of the second person, press OK and then press Call. The first person is put on hold. After the second person answers, choose Connect all from the in-call menu. Now all three of you can talk to each other at the same time.

Answer answer a waiting callSwap switch between two callsEnd end all callsNew call make a call when you have one in progressConnect all connect all active callsPhone book access the phone bookMenu access your phone’s menuTouch tones send touch tonesMute/End mute mute/unmute the phone’s microphone

27

Ending callsPress End or select End from the in-call menu.

Note: The wireless network does not support ending individual calls when more than one call is in progress.

Call waitingCall waiting is a network service that allows you to receive an incoming call when you are already in a call. Contact your service provider for details.

Answering a waiting callNote: Call waiting is a network service that requires a subscription from your service provider.

If you are in a call with someone and another person calls you, the function of the Navi™ Key changes from End to Options. Press Options. The in-call menu appears with Answer selected. Press OK.

Swapping between callsWhen you are in a call and you receive an indication of a waiting call, select Answer from the in-call menu. Your first call will be put on hold. To swap back to the first call, select Swap from the in-call menu.

Cancelling call waiting: standard methodTo cancel call waiting before making a call, you must get the call waiting cancellation code from your service provider.

1 Dial the code for cancelling call waiting followed by the phone number you want to call.

2 Press Call.

Example: If the code for cancelling call waiting is #43# and the number you want to call is (416) 555-1234, dial #43#4165551234, then press Call.

Cancelling call waiting: menu methodYou can save the code for cancelling call waiting given by your service provider and then use Menu 4 4 4 2 to cancel call waiting. See ‘Adding feature cancellation codes to the menu’ on page 26.

28

Call forwardingCall forwarding is a network service that lets you forward your incoming calls to another phone number. Check with your service provider for details and feature codes.

Activating call forwarding

Standard methodTo activate call forwarding, you must get the call forwarding activation code from your service provider.

1 Dial the code for activating call forwarding followed by the phone number to which you want to forward your calls.

2 Press Call.

Example: If the call forwarding activation code is *21* and the number you want to forward calls to is (416) 555-1234, dial *21*4165551234, then press Call.

Menu methodYou can save the code for activating call forwarding and then use the menu to activate call forwarding. See ‘Adding feature activation codes to the menu’ on page 26.

Cancelling call forwarding

Standard methodTo cancel call forwarding, you must get the call forwarding cancellation code from your service provider.

1 Dial the code for cancelling call forwarding (for example, #21#).

2 Press Call.

Menu methodYou can save the code for cancelling call forwarding and then use the menu to cancel call forwarding. See ‘Adding feature cancellation codes to the menu’ on page 26.

29

Digital/analog selectionUse Menu 4 4 1 to choose a mode for your phone.

Digit. & analog means the phone will work in digital or analogue networks. The phone tries to find a digital network but selects an analogue network if no digital network is available.

Analog forces the phone to use AMPS analog networks only.

Digital forces the phone to use TDMA digital networks only.

1-touch dialingThis feature allows you to make phone calls quickly and easily with the touch of a button. Once you have assigned a phone number to a number key (2 through 8), you can press and hold that key to dial the number. (You can also press the number key briefly and then press Call.)

Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox and for attempting emergency calls, respectively (see ‘Voice messages’ on page 42 and ‘Emergency calls’ on page 24).

Assigning numbers to keysBefore you can assign a phone number to a key, the phone number must be saved in your phone book (see page 15). Then follow the steps below.

1 Press Menu 1 6.

2 Scroll to the desired key, then press Assign.

3 Press or to choose the name you want to assign to the selected key, then press Select.

If a key already has a number assigned to it, you can press Options and then view, change, or erase the number assignment.

Making calls using one-touch dialingPress and hold a number key (2 through 8) for a few seconds to call the number assigned to it. Your phone finds the phone number, displays it briefly, then dials it.

You can also enter the number of the 1-touch dialing key (for example, 2) and press Call.

30

Choosing your phone number (NAM selection)Your service provider can set up your phone to have two phone numbers that are activated in different service areas—for example, one number for the Toronto area and one number for the Montreal area.

A number assignment module, or NAM, consists of a phone number and network information that the service provider programs into your phone. When you select a NAM, you are not only selecting a phone number, you are also selecting a home system in which you will not be charged roaming fees. For more information about home systems, see ‘Public system selection’ on page 33.

The two NAMs are not equal. Some features, such as system selection (see page 32) and network feature setting (see page 26), are available only when the primary NAM is selected.

Use Menu 4 5 to select a NAM.

Send own numberThis network service allows you to hide your phone number from a person you are calling who has Caller ID. (If for some reason your network prevents phone numbers from being displayed, you may be able to use this feature to show your number to the person you are calling.) Contact your service provider for feature codes for showing/hiding your phone number.

Standard method1 Dial the feature code followed by the number you want

to call.

2 Press Call.

Example: If the feature code to hide your number is *67 and the number you want to dial is (416) 555-1234, dial *674165551234, then press Call.

31

Menu methodYou can save the feature code given by your service provider so that Send own number appears in your phone’s menu, and then use Menu 4 4 5 to use this feature. See ‘Network feature setting’ on page 26.

This feature must be activated before each call.

Yes displays your number to the person you are calling.

No prevents your number from being shown to the person you are calling.

Calling card callsBefore you can make a call using a calling card, you have to enter your calling card information into the phone. See ‘Calling card set-up’ on page 17.

To make a call using a calling card:

1 Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

2 Press and hold Call for a few seconds until your phone displays Card call.

3 Your phone displays Wait for tone, then press OK. Wait for the tone, then press OK.

4 Your phone displays Wait for tone, press OK again. Wait for the tone again, then press OK.

System selectionYour phone is capable of working in residential, private, and public systems. You can choose how your phone selects a network to use.

This feature is Menu 5 in your phone. The default is Automatic, which means your phone automatically searches for networks available to you and chooses the appropriate one. Every time you switch on your phone, Automatic is selected.

If you choose Manual, your phone displays a list of available and unavailable networks. (You cannot use unavailable networks.) Scroll through the choices and press OK when you reach the one you want.

32

If you choose New Search, your phone begins a new search for new private and residential systems. When it finds the best new system, it displays it. You can then select it or start another search by pressing Next.

Note: The Manual and New search features can be used only when your primary phone number (NAM1) is selected. See page 31.

To switch from private to publicIf you are in a private system and want access to a public system, press and hold Menu when you are not in a call. Your phone will display Search public systems? Press OK and your phone will use the public system for the next outgoing call. After the call it will revert to Automatic system selection.

Public system selectionWhen your phone leaves its home system, it is roaming. Like other public systems, your home system is either type A or B. When your phone is roaming, it can search for home-type systems (same type as your home system) or non-home-type systems (opposite type as your home system).

Also, your service provider has programmed a list of preferred systems into your phone. These are systems with which your service provider has roaming agreements.

Use Menu 4 4 2 to tell your phone how to choose a public system (network). Your selection remains active until you change it.

Any system When service is not available in your home system, the phone searches for a preferred system of either type, then a home-type system, then a non-home-type system.

Home type When service is not available in your home system, the phone searches for a home-type system, preferred first.

Nonhome type The phone searches for a non-home-type system only, preferred first (home system is not used).

Home only The phone uses its home system only (that is, it will not roam).

33

Automatic answerThis feature is available only when your phone is connected to a headset or to an approved handsfree car kit equipped with the ignition sense option, with the ignition on.

When automatic answer is turned on, your phone answers incoming voice calls after one ring. Use Menu 4 1 4 to turn this feature on or off.

Note: if the ringing type is set to Silent or Beep once, the automatic answer will not work.

Touch tonesYour phone can generate various sounds, called touch tones, when the keys are pressed.

Touch tones can be used for many automated services such as checking voice mail, movie times, and airline arrival/departure times.

Note: Sending confidential information over the air using touch tones is not recommended.

Setting manual touch tone lengthUse Menu 4 2 1 1 to set the length of touch tones created when you press a key:

Continuous means the tone sounds for as long as you press and hold the key.

Fixed sets the tone length to one tenth of a second, regardless of how long you press and hold the key.

Off turns off touch tones. No tones will be sent when you press the keys.

Setting automatic touch tone lengthUse Menu 4 2 1 2 to set the length of touch tones sent automatically by the phone to Short (one tenth of a second) or Long (half a second).

34

Saving touch tone stringsTouch tone strings can be used for sending and receiving information with your phone. Save touch tone strings the same way you save phone numbers (see page 15).

For example, you can save your office voice mailbox number along with your password for easy access to your messages. See ‘Special characters in phone numbers’ on page 12.

Sending touch tone strings1 During a call, press to clear any numbers from the

display.

2 Press Options.

3 Scroll to Touch tones, then press OK.

4 Enter or find the touch tone string, then press OK.

Restore factory settingsYou can use Menu 4 2 3 to reset many of the settings in your phone to their factory defaults (as in a new phone). You will be required to enter the security code.

Note: The phone book, language setting, call timers, security code, and lock code are not affected.

35

8. Phone bookYour phone allows you to save 100 phone numbers and associated names so they are right at your fingertips for easy dialing.

Saving names and numbersSaving a name and number is easy! Just enter the phone number, press

or , then press Save. Enter a name if you wish, then press OK.

Each name may consist of up to 16 characters and each phone number may consist of up to 32 characters.

Saving a number quicklyTo save a number quickly, enter the phone number, press

or , then press and hold Save. The number is saved to your phone book and you can add a name to it later (see ‘Editing names and numbers’ on page 38).

Saving a name and number while in a callTo save a name and number while in a call:

1 Press .

2 Press Options.

3 Scroll to Phone book, then press OK.

4 Scroll to Add new, then press Select.

5 Enter a name if you like, then press OK.

6 Enter the phone number, then press OK.

The entry is displayed in your phone list. Press Call to call the number or to clear the screen (the current call will not be affected).

36

Notes about saving names• A name may appear only once in memory. If you try to

save a name that already exists in memory, the phone asks if you want to replace the existing name.

• If you try to save a phone number and your phone book is full, you are given the option to replace an existing entry. Scroll to the entry you want to replace and press OK, or press to cancel.

Finding names and numbersThere are several ways to find names and numbers in your phone book.

From the start screenPress to access your phone book, then scroll to the desired name/number.

Tip: You can also press the number key that corresponds to the first letter of the name. The first matching entry is displayed at the top of the screen.

Using the Phone book menuPress Menu 1 1, enter the first few letters of the name, then press OK. Your phone displays the first matching entry at the top of the screen.

While performing other functionsSay you want to forward your phone calls to a number that is saved in your phone book. When you are prompted to enter the phone number, you can find it instead—simply press Search to access your phone book.

37

Editing names and numbersTo edit phone book entries, press Menu 1 3, scroll to the entry you want to edit, then press Edit. Edit the name and number as needed.

Erasing names and numbersUse Menu 1 4 to erase entries from your phone book. One by one lets you select one entry at a time to be erased. Erase all erases your entire phone book (you will be required to enter your security code first).

Scrolling viewUse Menu 1 5 1 to choose a scrolling view for your phone book (Name list, Name+number, or Name only).

Tip: If your phone book’s scrolling view is set to Name list or Name only, you can view the phone number associated with a name by pressing and holding the key.

Checking available memoryUse Menu 1 5 2 to see how many memory locations are free and how many are being used. (Each memory location holds one phone number and associated name.)

38

9. Call logFor your convenience, the call log (Menu 3) saves a list of phone numbers you have dialed, and can show you how much time you have spent on the phone. If you subscribe to the caller ID network service, the call log also records the phone numbers of missed calls and received calls. Contact your service provider for details.

The Options keyWhen you access Missed calls, Received calls, or Dialed calls and press Options, a list of options appears on your phone’s display.

Call dials the number.

Call time shows the time of the last call. (Your phone’s clock must be set; see page 18.)

Edit number allows you to edit the number.

Save allows you to enter a name for the number, edit the number if needed, and save both to your phone book.

Erase erases the number from the call list.

View number displays the associated phone number if only the name is currently displayed.

Missed callsIf you subscribe to the caller ID network service, your phone automatically stores the last 10 numbers that have tried unsuccessfully to reach you (as long as the caller allowed his or her number to be shown to you).

When the display says Missed callsPress List. If you have missed more than one call, you can scroll through the list of numbers. To dial the displayed number, press Options, then choose Call.

Viewing the missed calls list at any timeUse Menu 3 1 to view the missed calls list at any time. To dial a number, press Options, then choose Call.

39

Received callsIf you subscribe to the caller ID network service, your phone automatically stores the phone numbers of the 10 most recent calls you have answered. Use Menu 3 2 to view the received calls list. To dial a number, press Options, then choose Call.

Dialed callsYour phone automatically stores the last 10 numbers you have dialed. From the start screen, press to access the dialed calls list. Scroll to the desired number, then press Call.

Note: To perform any of the options listed on page 39, access the dialed calls list by pressing Menu 3 3.

Clearing call listsUse Menu 3 4 to clear the missed, received, and/or dialed call lists.

Call timersUse Menu 3 5 to see the amount of time you have spent in calls. Times are for the currently selected phone number; your phone has a separate timer for each phone number, or NAM (see page 31).

Note: The actual time invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, and so forth.

Viewing call timersUse Menu 3 5 to view the various call timers.

Last call is the duration of the last call, or current call if applicable.

All calls is the duration of all calls since the timers were last reset.

Life timer displays the duration of all calls for the life of your phone and cannot be reset.

40

Setting timers back to 0Use Menu 3 5 4 to clear call timers. You will be required to enter your security code.

Displaying the current call timer during calls1 Press Menu 3 5 1.

2 Press Details.

3 Press Select.

4 Scroll to On, then press OK.

During a call, the amount of time spent in that call will be displayed.

41

10. Voice messagesVoice mail is a network service that allows callers to record a message when you cannot be reached. You can then call your voice mailbox and retrieve your messages.

Saving your voice mailbox numberWhen you subscribe to voice mail, your service provider will give you a voice mailbox number. You should save this number so you can call your voice mailbox by pressing and holding the key. See ‘Voice mailbox number’ on page 23.

Listening to new voice messagesWhen you receive a voice message, your phone may notify you by beeping, displaying the voice message indicator

, and displaying New voice message. The phone may display the number of messages if there is more than one.

Note: The method of notification depends on your service provider.

When your phone notifies you that you have a new voice message, press Listen. Your phone dials your voice mailbox number, if you have saved it.

Calling your voice mailbox at any timeOnce you have saved your voice mailbox number, you can press and hold the key to dial your voice mailbox.

42

11. Text messagesThe text message network service allows you to write, send, forward and reply to text messages. Also, you can receive text messages from a variety of sources, such as a Web page set up by your service provider.

Note: The availability of text messages may vary according to your wireless service provider. Contact your service provider for details.

Reading messagesWhen you receive a text message, the phone displays the

indicator, either Message received or New emergency message (if an emergency message has been received), and makes a sound (depending on the message alert tone; see page 21).

To read the message, press Read. This takes you to the Inbox, with the new message selected. Press Read again. If necessary, use the scroll keys to read the entire message.

After reaching the end of the message, use the scroll keys to view the sender’s name or phone number, and the date and time the message was received.

Options when reading messagesSeveral options are available while you are reading a message. Just press Options, scroll to the one you want, then press OK.

Read next allows you to read the next message.

Erase deletes the message. Press OK to confirm the deletion (or to cancel).

Save saves the message in the Saved folder.

Call back calls any displayed phone number included in the message. If more than one number was included, a list of numbers is displayed. Choose one and press Call.

Forward forwards the message to another person. That person must have the appropriate message service.

43

Reply provides a screen where you can write a reply to a message.

When you have seen the last new message, the indicator disappears.

About the InboxThe Inbox holds text messages that have not been deleted or saved. Use Menu 2 1 1 to access the Inbox at any time.

You will see a list of message headers. The icon in front of the header indicates that a message has been read. The icon indicates that a message has not been read. Scroll to the desired message, then press Read.

About the Saved folderThe Saved folder holds up to 30 saved text messages. Use Menu 2 1 2 to access the Saved folder and read saved messages.

Storage of incoming messagesWhen you have an incoming text message and your phone’s memory is full, one or more low-priority messages, which have been read, will automatically be deleted in order to receive the new text message. Messages are usually deleted from your Inbox, but an emergency message may cause messages to be deleted from the Saved folder.

If the message memory is still full, your phone will display No space: message waiting. You can clear this notification by pressing OK. You should delete one or more old messages to make room for the new message. The network will re-send the message at a later time.

44

Erasing all text messagesUse Menu 2 1 6 to access the Erase all option for Text messages. Erase all allows you to permanently erase all messages from one of the following categories:

Writing and sending text messagesYou can write a text message using your keypad. Once you have written a message on your screen, you will have options for sending your message.

Note: Check with your service provider for details about language and feature availability.

Writing a text message1 Press Menu 2 1 3 and select Write message.

2 Write your text message by entering letters and numbers from your keypad.

3 The function of the Navi™ key will change to Options.

Your Options menu is:

Sending a text message1 Write a text message and press Options.

2 To send the message, highlight Send and press OK.

3 Enter the phone number (or press Search to locate the number in the phone book), then press Send.

All read Erases all read messages in the inbox

All in inbox Erases all messages in the inbox

All saved Erases all messages stored in the Saved folder

All in outbox Erases all messages in the outbox

Send send the message

Exit return to the Text messages menu

Clear screen clear all entered text from the screen

Settings choose a setting for your message

Save store the text message to Saved

45

Message settingsThis network feature allows you to mark your text message as urgent, place your number within the text message, or request a read receipt. This is a network feature. Contact your service provider for more information.

Message settings are located in the Write new options menu as Settings. You may select or deselect the following settings by pressing Mark or Unmark.

Received Urgent messages are indicated with an exclamation mark (!) in front of the message.

Note: Callback no. is the default setting for your phone.

About the OutboxUse Menu 2 1 5 to access the Outbox. The Outbox stores messages that were sent successfully as well as messages that were sent unsuccessfully. The icon in front of a message heading shows that you have sent the message to the text message center. The icon shows that you attempted to send the message, but your attempt was unsuccessful.

Press Read to read the selected message.

Forwarding and replying to a messageYou can forward or reply to messages which are located in the Inbox, Saved folder or Outbox. Highlight the message and press Read. The Options menu appears.

Forwarding a text message1 Highlight the message that you want to forward.

2 Press Read, then press Options.

3 Scroll to Forward, press OK.

4 Scroll to either As message or As e-mail, press OK.

5 Send the message as you normally would.

Urgent notify recipient that your message is important

Read receipt notify you that the recipient has opened your message

Callback no. place your phone number within the message

46

Replying to a text message1 Highlight the message that you want to reply to.

2 Press Read, then press Options.

3 Scroll to Reply, press OK.

4 Scroll to either As message or As e-mail, press OK.

5 Send the message as you normally would.

Sending and receiving business cardsYou can send and receive electronic business cards. A business card consists of a name, phone number and e-mail address. You can save received business cards in your phone book.

Sending a business card1 Press Menu 1 7.

2 Now you are in your phone book. Scroll to find the name whose business card information you want to send.

3 Choose the name and press Send.

4 Enter the phone number to which you want to send the business card (or press Search to locate the number in the phone book) , and press Send.

Tip: Save your own business card in the phone book. When you need to send one, it is ready.

Viewing a received business cardWhen you receive a business card, the phone displays the text Business card received and sounds an alert (depending on the ‘Message alert tone’ on page 21).

Note: If you press at any time before saving the business card, the business card will be deleted!

1 When your phone displays Business card received, press Options.

2 Select Show and Press OK.

3 Scroll through the available information.

47

Saving a viewed business card1 After viewing the business card, press , scroll to

Save, then press OK.

2 At the Name prompt, edit the name if you want to, then press OK.

3 At the Number prompt, edit the number if you want to, then press OK.

Deleting a viewed business card• After viewing the received business card, press .

Business cards are saved in your phone book and you can delete them the same way you delete phone book entries.

48

12. E-mail messagesYou can use your phone to send and receive e-mail messages. This means you no longer need to be at your computer to send or receive messages.

Saving e-mail addressesYou can add an e-mail address to a name you already have in your phone book. Or, you can add a name and address as a new entry.

Save an e-mail address for an existing name1 Press Menu and Select.

2 Scroll to Edit and press Select.

3 Scroll to the name you want to add an e-mail address to and press Edit.

4 When prompted Name, press OK.

5 When prompted Number, press OK.

6 When prompted E-mail address, enter the e-mail address.

To add special characters (@ and . ), press to get to the special character screen. Scroll to the character you need and press Use.

7 Press OK.

For more information, see ‘Editing names and numbers’ on page 38 and ‘Special characters in names’ on page 12.

Add a new e-mail address1 Press Menu and Select.

2 Scroll to Add new and press Select.

3 When prompted Name, enter the name for the e-mail address. Press OK.

4 When prompted Number, enter the phone number for the e-mail address or press OK to leave it blank.

49

5 When prompted E-mail address, enter the e-mail address.

To add special characters (@ and . ), press to get to the special character screen. Scroll to the character you need and press Use.

6 Press Save.

For more information on saving, editing and erasing phone book entries, see ‘Phone book’ on page 36.

Sending e-mail messagesBefore you can send and receive e-mail messages, you need to have the e-mail gateway number saved in your phone. Contact your service provider for more information.

1 Press Menu 2 1 4.

Note: Please contact your service provider in the event your are prompted for the e-mail gateway number.

2 When prompted E-mail address, enter the e-mail address or press Search to scroll through the e-mail addresses in your phone book. Press OK to choose the e-mail address and press OK to confirm the address.

3 When prompted Subject, enter a subject for your e-mail message, or press OK to leave it blank.

The screen you see now has the cursor is blinking after the e-mail address and the subject text. In the top right corner a number shows the characters you have left to use in your message.

Note: The maximum number of characters for message length varies. Contact your service provider for details.

4 Write your message.

5 Press Options and scroll to Send. Press OK.

50

Options for a completed message

Forwarding and replying to e-mail messages1 If the message is not on the screen, press Menu 2 1 1.

2 Scroll to the message you want to use and press Read.

3 Press Options, scroll to Forward or Reply, and press OK.

4 Scroll to As e-mail and press OK.

5 When prompted for the e-mail address, enter the address or press Search to scroll through the list of e-mail addresses in your phone book. Press OK to choose the address and press OK to confirm the address.

6 Enter a subject line and press OK.

7 When the message box appears, write your reply or the message to the forwarded e-mail.

8 Press Options, scroll to Send and press OK.

Send send the message

Save save the message in the saved folder

Erase clear the message text

Exit erase the message and return to the Start screen

51

13. Extra features

Alarm clockThe alarm clock feature is based on your phone’s internal clock and sounds an alert at a time you specify.

Setting the alarm clockUse Menu 7 1 to turn the alarm clock on or off.

Note that when you are entering the alarm time, use two digits for both hours and minutes (for example, enter 1:30 as 0130). If the clock’s time format (see page 18) is set to am/pm, you will be asked to choose am or pm.

Note: The key does not work on this screen. If you make a mistake, re-enter all four digits.

For more information on clock, see page 18 and on automatic time update, see page 19.

Alarm volumeThe alarm volume is determined by the current ringing volume. However, if you have manually set the ringing option (see page 20) to Silent or Beep once or have selected the Silent or Quiet quick alert setting (see page 22), the phone only sounds a quiet beep.

When the alarm sounds• To shut off the alarm, press any key except Snooze.

• If you press Snooze, the alarm sounds again in 10 minutes. To turn off the alarm before then, press Stop.

• If you let the alarm sound for one minute without pressing a key, it stops for 10 minutes, then starts again.

If you turn off the phoneIf you turn off the phone and the alarm is set, the phone switches itself on at alarm time, then the alarm sounds.

52

• To shut off the alarm, press any key except Snooze. The phone displays Keep the phone on? Press Yes to keep it on or to switch it off.

• If you press Snooze, the phone turns itself off for 10 minutes, then the alarm sounds again.

REMEMBER! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Downloading ringing tonesYou can download up to five ringing tones to replace the Personal entries in your list of ringing tones. Contact your service provider for details on feature availability.

Note: If you press at any time before saving the ringing tone, the ringing tone will be deleted!

Notification of received ringing toneWhen you receive a downloaded ringing tone, your phone displays Ringing tone received.

Listening to the received ringing tone1 Press Options.

2 Scroll to Playback, then press OK.

3 Press Quit.

Saving the received ringing tone1 When your phone displays Ringing tone received, press

Options.

2 Scroll to Save tone, then press OK.

3 Highlight the ringing tone you want to replace.

4 Press OK.

Deleting the received ringing tone• Scroll to Discard tone, then press OK.

The ringing tone is not saved in your list of ringing tones.

53

GamesUse Menu 6 to challenge yourself or a friend to the three fun games in your phone. To pause a game, press . To resume, choose Continue.

Warning! Do not switch on the phone to use this function when wireless phone use is prohibited or when it may cause interference or danger.

MemoryReveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys. Press the 5 key to reveal pictures. Once found, pairs stay visible. Press the key to jump to the right over revealed pictures or to move from the bottom right of the screen to the top left. Press the key to jump to the left over revealed pictures or to move from the top left of the screen to the bottom right.

SnakeFeed the snake with as many goodies as possible and watch it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food. The longer the snake’s tail grows, the higher your score. If the snake hits its own tail or the surrounding wall, the game is over.

LogicFind the secret combination of figures in a column. Possible figures are shown at the top of the display. Press the 5 key repeatedly to select a figure and the 2, 4, and 8 keys to move the cursor. Once you think you have the right combination, press the key. The result appears as a set of marks above the column. A correct figure in the right place gets a full mark; a correct figure in the wrong place gets a half mark. The game ends when the correct figures are in the right place.

Tip: To copy a figure from the previous column, move the cursor over it using the 2, 4, or 8 key, then press the 5 key.

54

Prepaid serviceYour service provider may offer prepaid service. This means that you can sign up to become a prepaid customer and obtain airtime by purchasing a Prepaid card which contains a replenishment value. Contact your service provider for details.

Note: Use of the Prepaid menu requires that your service provider have access numbers available to check your balance and replenish your account.

55

14. Security features

Access codes overviewAccess codes consist of the lock code and security code. When you get your phone, you should change these codes from their defaults, write down the new codes, and keep them in a safe place away from the phone. Avoid using access codes that are similar to emergency numbers, such as 911, to prevent accidental dialing of the emergency number.

Lock codeYour phone’s lock code is used to lock and unlock your phone. The default lock code is 1234. Use Menu 4 3 2 3 to change the lock code.

When the phone requires the lock code, it displays Enter lock code: Enter the code, then press OK.

If you enter a wrong lock code five times in succession, your phone prompts you for the security code.

Security codeThe security code is required to restrict calls and to restore factory settings. The default security code is 12345. Use Menu 4 3 2 4 to change the security code.

When the phone requires the security code, it displays Security code: Enter the code, then press OK.

If you enter an incorrect security code five times in succession, the phone will not accept any input for the next five minutes.

Restricting callsUse Menu 4 3 1 to restrict outgoing or incoming calls. This is handy if you want to lend your phone to someone but do not want them to make long-distance or other expensive calls.

56

Restricting incoming callsChoose Restrict incoming calls to prevent your phone from receiving incoming calls. Enter your security code, then press OK. Press Mark, then press . Press Yes to save this change (or to cancel).

Note: This feature requires the caller ID network service, and the caller’s ID must be available to the phone in order for the restriction to work.

Allowing incoming callsTo allow incoming calls once again, choose Restrict incoming calls and enter your security code. Press Unmark, then press

. Press Yes to save this change (or to cancel).

Restricting outgoing callsYou can create a list of numbers to which outgoing calls cannot be made. A call restriction can consist of an entire phone number, an area code, etc. When the restriction is selected, calls cannot be made to any number beginning with those digits. For example, entering 4165551234 will block calls to (416) 555-1234 only. 1 will block all calls starting with 1, including long distance calls and 1-800 calls. 1800 will block 1-800 calls only.

Adding numbers to the restricted outgoing calls listTo prevent your phone from making outgoing calls, choose Restrict outgoing calls. Enter your security code, then press OK. Continue with the steps illustrated below.

1 Add restriction is selected. Press OK.

2 Enter the phone number, area code, etc. to which you want to restrict calls, then press OK.

OK

Number:

416 555 1234

57

3 If you want, give a name of up to 10 characters to the restriction (such as Joey, Long dist, or 1-800 #s), then press OK.

The entry is added to your list of restricted numbers.

Allowing calls to a number on the listIf you later decide to allow calls to a restricted number, press Select to see your list of numbers. Press Unmark to remove the restriction. (The number remains in the list so that you can restrict it again later by pressing Mark.) When you are done, press . Press Yes to save your changes (or to cancel).

Making changes to the restricted outgoing calls list To edit or completely erase an entry in the list, choose Edit or Erase, select the entry you want to edit or erase, and follow the instructions on the screen.

Phone lockYou can prevent unauthorized use of your phone by locking it. When your phone is locked, only incoming calls and calls to the unlocked phone number (see below) are allowed. The memory and menu are unavailable.

Note: Calls may still be possible to emergency numbers.

How to lock your phonePress Menu 4 3 2 1. Enter the lock code (see page 56), then press OK. Scroll to On, then press OK.

How to unlock your phonePress Menu, enter the lock code, then press OK.

Answering a call when the phone is lockedPress Answer.

58

Saving the unlocked phone numberUse Menu 4 3 2 2 to save a number that may be called even when your phone is locked. You will be required to enter the lock code.

Calling the unlocked phone numberPress or , or manually enter the number exactly as it is saved, then press Call.

59

15. AccessoriesAn extensive range of accessories is available for your phone. You can select the accessories that best suit your specific communication needs. For availability, see your local authorized Nokia dealer.

A few practical rules for accessory operation:

• Keep accessories out of small children's reach.

• When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

• Installation of complex car equipment must be completed by qualified personnel only.

Nokia Xpress-on™ colour coversYour phone’s Xpress-on™ cover is available in several fashion colours. Extra covers may be purchased from your authorized Nokia dealer.

You can use the new 5125 covers with the 5120 phones. The new cover requires a matching keypad. Also, you can use the 5120 covers with the 5125 phones.

Note: Always store the phone with cover attached.

WARNING!Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. This warranty does not cover defects or damages caused by a product which is not a Nokia Original Accessory.

60

Changing coversWhen changing covers, do not use the phone’s antenna as leverage!

1 Switch off the power and disconnect the phone from the charger or any other device.

2 Using a coin, depress the coloured tab on the top of the phone and slide the colour cover forward.

3 Remove the cover.

4 Remove the rubber keypad from the back of the cover. Place it into the back of the new cover.

61

BatteriesSeveral batteries are available for your phone:

• BLS-2N Extended Li-Ion 900 mAh

• BMS-2S Extended NiMH 900 mAh

• BMS-2V Vibrating NiMH 900 mAh

• BLS-4 Ultra Extended Li-Ion 1500 mAh

Charging timesThe table below displays approximate battery charging times. These charging times will charge your phone to about 80% of its capacity, and the battery strength indicator will stop scrolling. If you wish to obtain 100% battery capacity, please allow another two hours for “maintenance” charge.

5 Place the bottom of the cover against the bottom of the phone. Make sure all three sets of plastic tabs line up with their respective slots, as shown at left. Close the cover and snap it shut all the way around the edge of the phone.

Battery

Standard Travel

ChargerACP-7U

Rapid Travel ChargerACP-9U

Rapid Cig. Lighter

Charger LCH-9

BLS-2N Extended Li-Ion900 mAh

4 hours

2 hours

BMS-2S Extended NiMH900 mAh

1 hour, 30 minutesBMS-2V Vibrating NiMH900 mAh

BLS-4 Ultra Extended Li-Ion1500 mAh 5 hours 3 hours, 30 minutes

62

Talk and standby timesThe table below displays approximate talk and standby times. Variations will occur depending on network settings and usage.

Chargers and other accessories

WARNING!This apparatus is intended for use when supplied with power from the Standard Travel Charger (ACP-7U), Rapid Travel Charger (ACP-9U), or Rapid Cigarette Lighter Charger (LCH-9). Other usage will invalidate any approval given to this apparatus and may be dangerous.

The following chargers and other accessories are available for your phone; please see your dealer for details. Also, refer to any accessory options manual that may have been included in your sales package for the entire line of Nokia Original Accessories.

Note: When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused, a fully charged battery will discharge itself over time.

BatteryTalk Time Standby Time

Digital Analogue Digital Analogue

BLS-2N ExtendedLi-Ion 900 mAh

2 hrs -3 hrs, 15 min

1 hr -1 hr, 45 min

100 -200 hrs

30 -50 hrs

BMS-2S ExtendedNiMH 900 mAh

BMS-2V VibratingNiMH 900 mAh

BLS-4 Ultra ExtendedLi-Ion 1500 mAh 3 - 5 hrs 1 hr, 30 min -

2 hrs, 45 min170 -

335 hrs50 -

83 hrs

63

ACP-7U Standard Travel ChargerUse this durable and economical charger to charge all battery options. Plug the charger into a wall outlet and connect the connector to the bottom of your phone.

Check the charging status on the phone display.

Calls can be made during charging, but charging will stop for the duration of the call.

Note: If the battery is completely empty, you cannot use the phone until it has enough charge to operate.

The Standard Travel Charger is available for different voltage levels and can also be used with the DCH-9 Compact Desktop Charging Stand.

ACP-9U Rapid Travel ChargerThe extremely light, functionally designed Rapid Travel Charger charges your phone battery quickly.

Plug the charger into a wall outlet and connect the connector to the bottom of your phone. Check the charging status on the phone display. You can use your phone while charging.

Operating within a voltage range of 100V-240V AC (50Hz-60Hz), the Rapid Travel Charger is practically voltage-independent in normal office and household use. Like the Standard Travel Charger, the Rapid Travel Charger is compatible with all battery options. The Rapid Travel Charger can also be used with the DCH-9 Compact Desktop Charging Stand.

64

LCH-9 Rapid Cigarette Lighter ChargerThe multivoltage Rapid Cigarette Lighter Charger allows you to charge your phone when you travel. The small charger's functional design fits well with most car lighters and interiors.

Charging times are the same as for the Rapid Travel Charger ACP-9U. Calls can be made during charging.

A green light indicates that the Rapid Cigarette Lighter Charger is ready to charge. Check the charging status on the phone display. The input voltage is 12 or 24 V DC, negative grounding.

The Rapid Cigarette Lighter Charger can be used with all accessories available for your phone.

Avoid prolonged charging with the Rapid Cigarette Lighter Charger when the car engine is not running. This may cause the battery of your car to drain.

Note: In some cars the cigarette lighter plug is not provided with power when the ignition is switched off. Verify that the green LED light is lit.

DCH-9 Compact Desktop Charging StandCompatible with all battery options, the Compact Desktop Charging Stand can be used with the Standard Travel Charger ACP-7U or the Rapid Travel Charger ACP-9U. The Compact Desktop Charging Stand provides mounting for both the phone and a spare battery. Plug the charger into a wall outlet and connect the connector to the back of the Compact Desktop Charging Stand. Place your phone and/or a spare battery in the stand to begin battery charging.

65

When the phone is charging, no lights are displayed on the stand; check the charging status of the phone battery on the phone display.

Charging moves to the rear slot once the front battery is 100% charged.

When the spare battery is charging, check the status indicator on the left side of the charging stand. A red light indicates that the battery is charging; a green light indicates that the battery is charged to at least 80% of its capacity.

The phone has the built-in intelligence to maintain the battery, so there is no need for a discharge feature on the stand.

DCH-9 Rear Slot Charging Times

Battery

Using ACP-7U Using ACP-9U

Front slot empty

Front slot occupied

Front slot empty

Front slot occupied

BLS-2N ExtendedLi-Ion 900 mAh

6 hours,30 minutes

8 hours,30 minutes

4 hours,30 minutes

5 hours,30 minutes

BMS-2S ExtendedNiMH 900 mAh

BMS-2V VibratingNiMH 900 mAh

BLS-4 Ultra ExtendedLi-Ion 1500 mAh 12 hours 15 hours,

45 minutes 8 hours 10 hours,30 minutes

66

16. Reference information

Important safety information

Traffic safetyDo not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Remember, road safety always comes first!

Operating environmentRemember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

PacemakersPacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm.) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

• Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on;

• Should not carry the phone in a breast pocket;

67

• Should use the ear opposite the pacemaker to minimize the potential for interference.

• If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing aidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.

Other medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted facilitiesSwitch your phone off in any facility where posted notices so require.

Potentially explosive atmospheresSwitch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

68

69

VehiclesOnly qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Emergency calls

IMPORTANT!This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user- programmed functions which cannot guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

Making an emergency call1 If the phone is not on, switch it on.

2 Press and hold the key for several seconds to ready the phone for calls.

3 Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location.

4 Press Call.

If certain features are in use (Keyguard, call restrictions, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local wireless service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Radio frequency (RF) signalsYour wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

In August, 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies:

ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.

Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies and industry reviewed the available body of research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC guidelines (and those standards).

*American National Standards Institute, National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.

70

Care and maintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, OR any accessory:

• Keep it and all its parts and accessories out of small children’s reach.

• Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

• Do not use or store it in dusty, dirty areas as its moving parts can be damaged.

• Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store it in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phone's electronic circuit boards.

• Do not attempt to open it. Non-expert handling of the device may damage it.

• Do not drop, knock or shake it. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.

• Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.

• If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

71

17. Technical information

Part No. 9353205 Printed in Canada 02/01

Nokia, Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates.

The information contained in this User Guide was written for Nokia phone NSC-1NX.

The right to make changes and improvements to any of the products described in this guide without prior notice is reserved.

Issue 1 © 2001 Nokia Mobile Phones. All rights reserved.

US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1999. Tegic Communications, Inc. All rights reserved.

These commodities are authorized by the U.S. Government for export only to Canada, Mexico, or the United States. They may not be resold, diverted, transferred, or otherwise disposed of in any other country, either in their original form or after being incorporated through an intermediate process into other end-items, without the written approval of the U.S. Department of State.

Transmitting power: Up to 600 mW nominal

Operating voltage: 3.6 V nominal

Frequency band: 824.04 - 848.97 MHz (TX)869.04 - 893.97 MHz (RX)

Number of channels: 831 lowband

Number of NAMs 2

Memory locations: 100

Memory capacity: 16 characters per name32 characters per number

72

18. Nokia 1-Year Limited Warranty

NOKIA warrants that the NOKIA wireless phone and accessories are free from defects in material and workmanship. The warranty period for the Phone (Radio) units and all accessories (excluding carry cases) is twelve (12) months from the date of purchase OR fourteen (14) months from date of wholesale shipment from NOKIA, OR fifteen (15) months from the date of manufacture by NOKIA. The warranty period for the Carry cases is three (3) months from the date of purchase or five (5) months from the date of wholesale shipment from NOKIA.

During the warranty period, NOKIA will, at its option, repair or replace the defective product free of charge. Replacement Product may be either new or remanufactured or refurbished.

However, if NOKIA determines that the warranty conditions cannot be applied, the purchaser will be billed for the repair and shipping.

EXCEPTIONSThis warranty is subject to the following exceptions:

1. Mobile or fixed installation, which is not in accordance with the installation instructions, published by NOKIA, will void the warranty. Damage caused by a repair or an attempt to repair by other than a service centre authorized by NOKIA will void the warranty;

2. This warranty covers normal consumer use and does not cover defects or damage to any product which, in the sole opinion of Nokia, has been subject to: improper storage, exposure to moisture or dampness, exposure to fire, sand, dirt, windstorm, lightning, or earthquake; to theft, battery leakage, unauthorized modification, misuse, neglect, abuse, misapplication, accident, alteration, improper installation, maladjustment of consumer controls, or abnormal operating conditions, or which has been attributable to acts of God;

3. Fuses are not covered by the warranty;

4. This warranty does not cover defects or damages caused by a product which is not approved by NOKIA to be connected to its wireless phone;

5. This warranty does not cover defects or damages caused by improper or defective function of the carrier system or by inadequate signal reception by the antenna;

73

6. Removal and reinstallation costs are not covered by this warranty;

7. This warranty is applicable only to products bought through Nokia Products Ltd, in Ajax, Ontario, Canada, and sold either in Canada or Bermuda.

8. Removal, alteration, or defacing of the Serial Number Plate, or the accessory Date Code Labels will void the warranty.

In no event shall NOKIA be liable for incidental, special, or consequential damages, direct or indirect, loss of unanticipated benefits or profits, loss of use of its wireless telephone, resulting from the use of its wireless phone, or its accessories, or arising from any breach of this warranty.

CLAIM PROCEDUREIn order to obtain warranty performance, return the defective unit to the NOKIA Service Centre with transportation charges prepaid (Shipping of the repaired unit may be paid by NOKIA, in which case NOKIA shall have risk of loss or damage during this shipment).

The proof of date of purchase will be required before in-warranty service is rendered.

Maintenance and service may be obtained in any authorized service centre in Canada.

EXTENSION OF WARRANTY PERIODWhen a repair is made, an extra 90-day service warranty is given to the labour and parts of the repair concerned. If replacement of a faulty unit is applied, instead of repairing, this 90-day service warranty is applied to the replaced unit.

Besides this 90-day service warranty, the warranty repairs or replacements do not affect the original warranty conditions, which are determined by the date of purchase.

THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.

Some provinces do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

74

FOR WARRANTY SERVICE LOCATION, CONTACT YOUR SERVICE PROVIDER/RETAILER/DEALER OR DIRECTLY TO:

NOKIA PRODUCTS LIMITED575 Westney Road SouthAjax, Ontario L1S 4N7

For products being returned to NOKIA or its authorized service centres, the service provider/retailer/dealer shall prepay shipping charges, taxes, duties, insurance. NOKIA shall have no risk for loss or damage during this shipment.

NOTE: As warranty is automatically registered, no further action is required by the consumer.

75

19. Index

AABC mode 11access codes 56accessories 60batteries 62chargers 63covers 60

addresse-mail 49

alarm clock 52answering a call 16automatic answer 34

antenna 14external jack 7

automatic answer 34automatic redial 17automatic time update 19confirm first 20turn off 20turn on 19

Bbatteries 62attaching 3charging 3discharging 4removing 4

blocking calls see restricting calls

business cards 47receiving 47sending 47

Ccall block

see restricting callscall forwardingactivating 29cancelling 29

call log 39clearing lists 40dialed calls 40missed calls 39Options key 39received calls 40

call restrictions see restricting calls

call timers 40call waiting 28answering a waiting call 28

cancelling 28caller ID 16showing/hiding number 31

calling cardmaking calls 32set-up 17

callsanswering 16answering automatically 34answering with call waiting 28

ending 28forwarding 29initiating a second 27making 15muting 15, 27silencing an incoming call 16

switching between 27three-way calling 27unmuting 15, 27

care and maintenance 71chargers 63choosing own number 31clear key 7clearing call lists 40

76

clock 18alarm clock 52automatic time update 19displaying/hiding 19setting 18time format 18

conference calls see three-way calling

covers, changing 60cursor 11

Ddialed calls 40digital/analog selection 30directory see phone book 36downloading ringing tones 53

Eediting names/numbers 38e-mail messages 49e-mail gateway number 50forwarding 51replying 51saving e-mail addresses 49sending 50

emergency calls 24, 69emergency key 9 25erasing names/numbers 38external antenna jack 7

Ffactory settings, restoring 35

Ggame tones 21games 54gateway numbere-mail messages 50

Hhelp text 8

IInbox 44in-call menu 27

KKeyguard 13keypad lockemergency key 9 13

keypad tones 21keysclear key 7Navi(TM) key 6power key 6scroll keys 6

Llanguage 19lights 7in car kit 19

lock code 56locking the keypad 13locking your phone 58Logic (game) 54

Mmaking a call 15calling card 32

memory 38Memory (game) 54menu 8shortcuts 9

message alert tone 21messagestext see text messagesvoice mail 42

missed calls 39muting the microphone 15, 27

My tones (menu) 20

77

NNAM selection 31namesediting 38entering 11erasing 38finding 16, 37saving 36

Navi(TM) key 6network feature setting 26new call 27numbersediting 38entering 11erasing 38finding 16, 37saving 36showing/hiding your own 31

Oon/off 14one-touch dialing 30

Pphone book 36available memory 38scrolling view 38

phone lock 58phone number, choosing

see NAM selectionpower key 6prepaid service 55profiles

see quick alert settings

Qquick alert settings 22

Rreading text messages 43received calls 40

redialautomatic 17last number 15

restore factory settings 35restricting calls 56ringing option 20ringing tone 21downloading 53

ringing volume 21

Ssafety guidelines 1, 67safety information 67Saved folder 44, 46scroll keys 6scrolling view 38security code 56security features 56send own number 31signal strength 14silencing an incoming call 16Snake (game) 54sound see tonesspecial characters 12speed dialing

see one-touch dialingstart screen 7system selection 32

Ttechnical information 72text messages 43business cards 47forwarding 46Inbox 44reading 43replying 47Saved folder 44, 46storage 44writing 45

three-way calling 27

78

timers 40tones 20keypad 21message alert 21quick alert settings 22ringing option 20ringing tone 21ringing volume 21warning and game 21

touch tones 34saving touch tone strings 35setting automatic length 34setting manual length 34

Uunmuting the microphone 15, 27

Vvibrating alert 22view own number 31voice mail messages 42voice mailbox number 23voice privacy 23volumeearpiece 15ringing 21

Wwarning and game tones 21warranty 73welcome note 23writing text messages 45

79

NOTES

80

NOTES

81

NOTES

82