nokia nsn flexi wcdma bts commissioning and integration.ppt

5/19/2018 nokia nsn flexi wcdma bts commissioning and integration.ppt

1/58


2/58


3/58


4/58


5/58


6/58

OPEN THE NOKIA BTS MANAGER

CLICK CONNECT


7/58

WCDMA BTS IS GETTING CONNECTED


8/58


9/58

FRGC NOT DETECTED CHECK THE HARDWARE AND OPTIC

FIBER IS CONNECTED PROPERLY. MOSTLY FIBER OR

PATCH CORD IS FAULTY IN THIS CASE

SELECT THE REQUIRED CONFIGURATION FOR COMMISSIONING THE WCDMA BTS1. BTS SITE: FOR COMPLETE BTS AND TRS COMMISSIONING.

2. BTS ONLY: FOR ONLY BTS CONFIGURATION.

3. TRS ONLY: FOR TRS CONFIGURATION.

4. TEMPLET :

5. PLANNED : IF THE BTS SCRIPT IS PREMADE.

6. MANUAL : TO CONFIGURE THE BTS ON SITE.7. RECONFIGURING: IF THE BTS IS CONFIGURED AND NEED TO CHANGE THE FEW PARAMETERS.


10/58


11/58

1. FILL THE SITE INFORMATION.

2. ADD BTS ID BTS ID CAN BE OBTAINED FROM THE NETWORK PLANNER OR THE SITE ID CAN BE THE BTS ID (WHERE 3

REPRESENTS 3G AND FOLLOWING NUMBERS REPRESENT THE BTS ID.

3. A2EA WILL APEAR AUTOMATICALLY AS SOON THE BTS ID FILLED.

4. IP ADDRESS: IP ADDRESS CAN BE OBTAINED FROM THE NETWORK OPERATOR OR FROM BSC.

5. CLICK NEXTAFTER FILLING ALL THE DATA.


12/58


13/58

MARK IF IN USE AS PER THE AVIALABLE E1

1STE1 : PRIMARY IMA33.

2NDE1 : SECONDARY IMA33


14/58


15/58

TRAFFIC DESCRIPTOR:

TRAFFIC DESCRIPTOR WITH 2E1

CBR CBR CBR CBR CBR CBR CBR

CNBAP DNBAP AAL2SIG USERPLANE DCN DCN

VP1 VC 42 VC52 VC 62 VC 72 VP2 VC32

8790 150 300 150 8190 120 120

TRAFFIC DESCRIPTOR WITH 1E1

CBR CBR CBR CBR CBR UBR UBR

CNBAP DNBAP AAL2SIG USERPLANE DCN DCN

VP1=1 VC 42 VC52 VC 62 VC 72 VP2 VC32

4377 80 150 80 4067 151 151

NOTE: TRAFFIC DESCRIPTOR DATA CAN BE OBTAINED FROM

NETWORK OPERATOR OR FROM BSC.


16/58

TRAFFIC DESCRIPTOR CAN ALSO BE OBTAINED FROM NETWORK OPRATOR


17/58


18/58


19/58


20/58


21/58


22/58


23/58


24/58

DEFINING IUB


25/58

ATM INTERFACE IMA Group 33 IMA Group 33

VPI 32 32

VP TRADE VP1-CBR.1/8790 VP1-CBR.1/4377

Common NBAP

VCI 42 42

VC TRADE CNBAP-CBR.1/150 CNBAP-CBR.1/80

Dedicated NBAP

VCI 52 52

VC TRADE DNBAP-CBR.1/300 DNBAP-CBR.1/150

AAL2 Signalling

VCI 62 62

VC TRADE AAL2SIG-CBR.1/150 AAL2SIG-CBR.1/80

AAL2 User Paths

VCI 72 72

TRADE VC32-CBR.1/120 VC32-CBR.1/151


26/58


27/58


28/58


29/58


30/58

1. DEFINE BTS SETTINGS

2. REAL TILT : IF USED. (GET THE IP ADDRESS FOR REAL TILT FROM

NETWORK OPERATOR

3. MODULE LOCATION : DEFINE THE LOCATION OF THE MODULE WITH

MODULE ID 3218 WHERE 3 REPRESENTS 3G AND 218 REPRESENTS

THE SITE ID. NOTE: DIFFERENT MODULES CAN BE OF SAME ID.

4. PASSIVE UNIT : DEFINE THE SL.NO FOR THE CABINET ETC.


31/58


32/58

DEFINE ANT ID 32181.

WHERE 3 REPRESENTS 3G,

218 REPRESENTS SITE ID AND

1 REPRESENTS

SECTOR NUMBER

DEFINE THE ANTENNA PORT SETTING FOR SECTOR 1


33/58

DEFINE ANT ID 32182.WHERE 3 REPRESENTS 3G,


2 REPRESENTS

SECTOR NUMBER



34/58

DEFINE ANT ID 32183.

WHERE 3 REPRESENTS 3G,


3 REPRESENTS

SECTOR NUMBER



35/58

CLICK NEXT


36/58


37/58

DEFINE IF MHA IS IN USE


38/58


39/58


40/58


41/58


42/58


43/58


44/58


45/58

DEFINE ALARMS IF CONNECTED TO THE WCDMA BTS


46/58


47/58

COMMISSIONING IS DONE SEND THE PARAMETER TO THE BTS


48/58


49/58

SAVE THE PARAMETER TO THE DISK


50/58

SAVE THE PARAMETER TO THE DISK


51/58


52/58

SENDING THE PARAMETERS TO THE WCDMA BTS


53/58

RESETTING THE WCDMA BTS


54/58

NOW THE NOKIA FLEXI WCDMA BTS IS CONFIGURED

ALL THE DATA ARE SENT TO THE BTS.

CHECK FOR THE ALRMS IF ANY.

LAUNCH FLEXI HUB MANAGER TO CONFIGURE FTFA


55/58


56/58


57/58


58/58

Documents

nokia nsn flexi wcdma bts commissioning and integration.ppt