Nokia Hot Codes

8/9/2019 Nokia Hot Codes

1/37

http://nfader.su/ master code site

.....:::::nokia hot secrate codes and all tricks here:::::.....

*#06#

IMEI number (International Mobile Equipment Identity)

*#0000#Firmware version and date, Phone Model and Operator Variant

*#92702689#

Life timer (W A R 0 A N T Y) - The amount of time your phone has spent sendingand receiving calls.

*#62209526#

Wireless MAC Address (M A C _ W L A N)

*#2820#

Bluetooth MAC address (B T A 0?)

*#7370#

Format phone (R E S 0 ?)

*#7780#Factory Reset (R S T 0 ?)

Note:

Format phone restores phone to as if it was out of the box. Retains firmwareversion and operator Variant changes but wipes all applications you have installed.

Does not format the memory card so any apps on there may reinstall once poweredback up again.

Another way to format some symbian phones: Power offphone. Press and holdGreen, * and 3 and keep them held whilst powering on and for a few seconds after.

Factory Reset resets all settings to defaults but keeps any applications you haveinstalled and photos etc. Both need the Security code, which, by default, is 12345.

N95 picture viewer:

2 Scroll up (when zoomed)4 Scroll left (when zoomed)

5 Zoom in (12.5%/25%/50%)6 Scroll right (when zoomed)

8 Scroll down (when zoomed)0 Zoom out

Press and hold (in Standby):Right selection key: Voice commands

Multimedia Key: Now Playing

1: Voicemail2-9: shortcuts to address book you need to set up first

0: Web#: Switches between General and Silent modes - not supported by all Operator

Variants (when composing messages will switch between character and number inputwhen held down)

Mastercode: 0776672163
http://nfader.su/http://nfader.su/


2/37

12# (etc) in standby will dial the number held in location 12 on your SIM address

book|

Label: NOKIA

Nokia 5110*#06# for checking the IMEI (International Mobile Equipment Identity) Informationyou get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval codeFAC = Final assembly code

SNR = Serial numberSP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by modewhich will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]

You don't need the warranty-codes any more - you can just scroll through theinformation like in any other menu. It has the the same data as 81xx and 31xx

phones (with "Edit" button for purchase date, and "User data transfer").

Menu:

1: Displays Serial Number.2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY) you can hereset the Purchasing Date (Warning: You can only do this once - so be careful what

you write...)4: Displays the date of the last repairment - if found (0000)

6: Does anyone know if this is for upgrading the phone's EEPROM?? (Transfer user

data?)

Enhanced Full Rate Codec (EFR):On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes

more power )Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone( better standby time )

Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of thephone

Enhanced Full Rate will give you much better sound quality when you enable it. The

new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode


3/37

Excitation Linear Prediction) compression technology. This technology allows formuch great voice quality in the same number of bits as the older Full Rate CODEC.

The older technology was called LPC-RPE (Linear Prediction Coding with RegularPulse Excitation). Both operate at 13 kilobits.(but you take up more space on the

network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider theopportunity to have more calls on the network, and you might get a lower chargefrom them. - Will give you 30% longer talk-time.

Network MonitorThere is a hidden menu inside your Nokia phone. If you want to activate it, you'll

have to re-program some chips inside of your phone.

1.Check your software version. You can only continue if you have v4.33, v4.73 orv5.24.

2.Take apart the phone.3. De-solder the EEPROM (ATMEL AT 24C64).

4. Read out the data with an EEPROM programmer and save it to a file (Backup).

5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".6. If you have v5.24 then change the address "0378" from "00" to "FF".7. Write the new data to the EEPROM and solder it back to the phone.

8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level C1 (Path loss criterion, used for cell selection and reselection).

The range is -99 to 99.

RTL (Radio link timeout).

Timeslot

Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)


4/37

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

Discard cell barred information.The Reboot TrickShould work on all software versions.

1. Go to calendar (menu - 8)

2. Make note / reminder3. Enter some text into the edit box

4. Hold clear until whole text is cleared, then press Back5. Press 0. Main screen is shown but a space appears on the screen. You can't see it

of course.6. Enter 4 digits (1234, for example)

7. Use the down arrow to move the cursor to the left side of the numbers and thespace (2 times down arrow)

8. Now enter 6 digits and press the green "Call button".

Wait some seconds...the phone will now flash the background light and finallyreboot. The trick should also work on other menus like the profile menu...

The James Bond Trick

If you short-circuit theleft middle and right pins on the bottom of the phone with allconnections touching each other, the Nokia software hangs! The profile "Headset"

will be activated. Before you do this just activate the "Automatic Answer" in theheadset profile and set the ringing volume to "Mute". Now you can use your phone

for checking out what people are talking about in a room. Just place it under a tablein a room and call it. The phone receives the call without ringing and you can listen

to what people are saying.

Service Prover Lock

The service provider (SP) lock is used to lock the cell phone to the SP's SIM card.Once the cell phone is locked to a specific operator, if one inserts a SIM card from a

different operator the phone will refuse to accept it! The cell phone will howeveraccept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be usedto lock the phone for upto 4 different providers. But most phones with restriction

only have one lock activated. ( lock 1)

The main code used in Nokia phones is:#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).Use the * key to get the p, + and w chars.

'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Country-Lock status#pw+1234567890+4# for SimCard-Lock status


5/37

# = DOUBLE-CROSSW = PRESS "*" THREE TIMES

P = PRESS "*" FOUR TIMES+ = PRESS "*" TWO TIMES

MASTERCODE = 1234567890Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.(I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 asthe (master code)

eg. To check ifphone ifrestricted on lock 1 type the following code:#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it's only

possible to type in about 3 different codes on each lock! Then something bad will

happen ..therefore be careful!

Bypass the SP lock

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you canbypass the SP lock like this:

1: Insert sim card of diferent provider.2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and

the phone says PIN CODE?3: Press the "C" key.

4: Then Press * and wait until it desapear and apear again, then press * one moretime and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card isaccepted until you restart the phone again. NOTE: On version 5.04 Nokia has

removed this option !

Your number in your display1. Goto menu 3-7 Call cost settings.

2. Turn ON the Call costs' limit 3-7-1. PIN2 code Required.

3. Put in the limit with the phone number. eg. my phone # is 019 2184697 Enterthe limit as 2184697

4. Goto menu 3-7-2 Show costs in. PIN2 code Required.5. Select Currency.

6. Enter Unit price : 17. Enter Currency name as 019 (per my phone # eg. above)

Now the phone number 019 2184697 will remains on the 4th row of the display.Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.

Larger Number Tip (works in 51xx series)

If you hold the key # while you are in the names list, the telephone number can beviewed larger.

Power Button Tip:

If you press the button for a short moment, the menu with the profiles is shown on


6/37

the display. If you press one more time, the mobile turns itself off. You can use theup and down cursor keys to scroll and enable a different alert setting.

Crazy 5110

Send a SMS full of . (dots) the it'll go crazy when you scroll the received message inyour 5110. It doesn't do any permanent damage...it only goes crazy if you scroll the

SMS. I'm not sure if it works with all of the software version but it works with 4.59.Doesn't work on SW version 4.53 ..

The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get thephone number used for with this key when speed dialing.

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased withoutretoring the factory default settings. To do these tricks you need to short-circuit the

pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a

short time the word "Headset" will be shown in the display. Menu 3-6 is nowenabled.2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a

short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

Quick SMS TypingWhen typing SMS messages, you have to wait some seconds before you can type the

next letter if it is in the same button than the previous one. For example try to writethe word "letter", you have to wait before you can enter the second "t".. A much

faster solution is to press the # button twice and then the letter "t".

Free Call Tip

NB. The tips needs Net Monitor enabled. Be aware that the trick wil removeNetmonitor in some sw versions like v4.73 and v5.04.

1. Laungh the NetMonitor in your Nokia 51xx / 61xx

2. Execute the test number 4973. Free calling for about 90 sec should now have been activated.

The trick has not been comfirmed working yet.

New Menu on Emergency Calls*3001#12345# Brings a new menu that gives you access to the emergency calls

( 911 Etc. ). It will give you FREE calls! (only the ones you put in the emergency!! )This option will depend on your GSM operator, may be this code will not works and

you still can get the bill!|

Label: NOKIA

Nokia 3210*#06#

for checking the IMEI (International Mobile Equipment Identity) Information you getfrom the IMEI:


7/37

XXXXXX XX XXXXXX X

TAC FAC SNR SP



*#0000# To view Software Version.

*#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by modewhich will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture (0997)

3. Displays (if there) the date where the phone was purchased (MMYY)4. Displays the date of the last repairment - if found (0000)5. makes you capebel of transferring user data if you have the gear for it

6. shows how many hours the phone has been on

Latest software version: V 05.36 NSE - 8/9 (25-07-00)

V 5.31 NSE - 8/9 (24-05-00)V 5.26 NSE - 8/9 (07-04-00)

V 5.02 NSE - 8/9V 4.41 NSE - 8/9 (17-08-99)0

V 4.11 (???)

V 3.10 NSE - 8

*3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.#3370# - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*4370# - Half Rate Codec activation. It will automatically restart#4370# - Half Rate Codec deactivation. It will automatically restart

xx# - xx position in Phone Book

Enhanced Full Rate will give you much better sound quality when you enable it. The

new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCodeExcitation Linear Prediction) compression technology. This technology allows for

much great voice quality in the same number of bits as the older Full Rate CODEC.The older technology was called LPC-RPE (Linear Prediction Coding with Regular

Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on thenetwork, so they can charge you more) - Talk-time is reduced with about 5%

Free SMS Tip

1st Way:1. turn our phone off.

2. turn it on and enter your pin.3. enter *#746025625# 4. now "SIM CLOCK STOP ALLOWED" will be displayed.

now you can send sms for free. if you turn your phone off and later on you have to


8/37

reenter this code!!!In some Networks it doesn't work!!!

2nd Way:Set Menu 4-3-3 on Usergroup 666 (work with German Networks). It's now the group

999, but it's not tested yet.|

Label: NOKIA

Nokia 3110

*#06# for checking the IMEI (International Mobile Equipment Identity) Information

you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


SNR = Serial number

SP = Spare

*#7780# restores Factory Settings..(Memory, language, counters not included)

*#3110# for checking the phone's software (SW) - called firmware revision

information.

#746025625# [*#sim0clock#]Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode

which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT

SAVED'...)7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE

NOT SAVED'...)

9268 (OK) : Displays Serial Number37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once -

So be careful ...)87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to

another

Service Prover LockThe service provider (SP) lock is used to lock the cell phone to the SP's SIM card.

Once the cell phone is locked to a specific operator, if one inserts a SIM card from adifferent operator the phone will refuse to accept it! The cell phone will however

accept another SIM card from the same operator.




9/37

The main code used in Nokia phones is:

#pw+(master code)+Y#This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w chars.'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.


#pw+1234567890+3# for Country-Lock status

#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSSW = PRESS "*" THREE TIMES

P = PRESS "*" FOUR TIMES+ = PRESS "*" TWO TIMES



Eg. To remove restriction on lock 1 type following code:#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 asthe (master code)

eg. To check ifphone ifrestricted on lock 1 type the following code:#pw+1234567890+1#


possible to type in about 3 different codes on each lock! Then something bad will

happen ..therefore be careful!

Bypass the SP lockWith a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can

bypass the SP lock like this:1: Insert sim card of diferent provider.

2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and

the phone says PIN CODE?3: Press the "C" key.

4: Then Press * and wait until it desapear and apear again, then press * one moretime and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is

accepted until you restart the phone again. NOTE: On version 5.04 Nokia hasremoved this option !

Fast silent mode

In the newer versions (v.7.11 or higher) a quick silent mode can by entered. PressMenu then #.

The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the


10/37

phone number used for with this key when speed dialing.|

Label: NOKIA

Nokia 2170(170-2213/4) Security

The 170-2213 and the 170-2214 are both the same telephone. The onlydifference is where they are sold.

Security Code

Your phone will prompt you for a five-digit security code to enter certain

features. The factory default code is 12345, and that is what your phonewill accept until it is changed.

If your service provider hasn't already changed your security code, it's

recommended you have it changed immediately. See "To change your securitycode (Menu 5 3)" below.

Note: When entering your security code, ** will appear on the displayto keep others from viewing your code.

If you make a mistake entering the code,

Erase the incorrect digit by pressing CLR or press and hold CLR to exitthe current function.

What if you enter the wrong security code?

You can still enter it again. But if you enter the wrong security code

five times in a row, your phone will activate a security timer.

If this happens, your phone will not accept a security code for about five

minutes, even if you enter the correct one. You can still use your phone,but any attempts to enter the security code will reset the timer.

Once the timer has elapsed, you may re-enter the correct security code to

access security code protected features.

Note: Your phone must remain on during the five minute security timer or

the timer will reset for another five minutes.

Menu 5 1, Automatic Phone Lock

When this feature is activated, your phone will be locked every time youswitch on your phone. You must enter a four-digit lock code to unlock

your phone. Without entering your lock code, you'll be denied access toalmost every memory and menu function.

When your phone is locked, your phone will only receive incoming calls and

make outgoing calls to the phone numbers stored in memory locations 2, 3,and 4.


11/37

If your phone is locked and you switch your phone off and back on again,you must enter the lock code.

Note: When your phone is locked, calls may be possible to the emergency

number programmed into your phone (e.g. 911 or other officialemergency number) including calls with Emergency Key 9.

To enter the lock code

At Enter lock code: enter the lock code and press OK.

Note: Your security code can be entered in place of the lock code when

you are asked to enter the lock code.

To answer a call with Auto Lock on

Press TALK.

Can you make calls with Auto Lock on?

Yes. You can call numbers that are stored in memory locations 2, 3, and4, which are unlocked. To make full use of this feature, you may wish to

store your most frequently-dialed numbers in these locations.

To call unlocked memory locations while Auto Lock is on

There are four different ways you can do this:

1. Press and hold CLR to go to the start screen. Press / or / todesired unlocked location, then press TALK.

2. Enter number as it is stored and press TALK.

3. Press desired unlocked location (either 2, 3, or 4) and press TALK.

4. Press and hold the desired unlocked location.

To turn Auto Lock off

Use Menu 5 1 and your lock code.

To change your lock code (Menu 5 2)

You can change your lock code with your phone's menu. Your default code

is set to the last 4 digits of your phone number. In a lock code, onlycharacters 0 to 9 * and # are accepted.

Changing the lock code is simple. Just press Menu 5 2 and follow the

prompts to do this. Make sure you have your security code handy. You'llneed it to change the lock code.

Note: Avoid entering access codes similar to emergency numbers to prevent

accidental emergency calls.


12/37

To change your security code (Menu 5 3)

The default security code for your phone is 12345. It's recommended that

you change this code immediately. Just press Menu 5 3 and follow theprompts to do this, and make sure you write the new code down and store it

away from your phone.

Menu 5 4, Restrict Calls

This feature allows you to restrict outgoing calls from your phone. Youcan select the level of restrictions through a series of menu choices.

Menu 5 4 1, Restrict outgoing calls

Allowed means that all calls can be made as usual.

Blocked means that no calls can be made.

Limited means that calls can be made only to phone numbers stored incertain memory locations.

When restricting outgoing calls by selecting Limited, you are prompted foran Allow from location: and To location: value. for example, at Allow

from location: enter 1 and To location: enter 15, to allow only calls tothe numbers stored in locations 1-15.

Note: When calls are restricted, calls may be possible to the emergency

number programmed into your phone (e.g. 911 or other officialemergency numbers). However, Emergency Key 9 may not operate

depending on the type of restriction you choose.

The default setting for this feature is Allowed.

Menu 5 4 2, Restrict international calls

Allowed means you can make international calls and Blocked means you

cannot.

The default setting for this feature Allowed.

Menu 5 5, Hide Memory

This feature will prevent your phone from displaying the phone number

stored in your personal directory.

To hide numbers in memory

Use Menu 5 5. You'll need your security code to do this.

To hide only one location, enter the location number at both the Hide fromlocation: and To location: prompts.


13/37

To hide a series of locations, such as locations 10-15, enter the firstlocation, for example 10, at Hide from location: and the last location,

for example 15, at To location:

Temporary Lists & Call Timers

Your phone automatically stores the last ten numbers you've dialed,numbers of the last ten calls you've answered, and the numbers of the lastten calls you missed. It also gives you ten temporary storage places in a

"notepad."

Note: Your phone displays the phone numbers of received and missed calls

only if you have subscribed to Caller ID and the wireless system isable to identify the caller.

Menu 01 1, Dialed Numbers

Press and hold CLR to go to the start screen.

Press TALK, then quickly press / or / to scroll the list.

If you want to call any of the other numbers in the list, press TALK while

that number is displayed.

To call the first number that appears on your screen, simply wait a fewseconds and your phone will dial it automatically.

The top right corner of the display shows the location number of the last

dialed number (L0 - L9). Menu 01 1 also accesses the Dialed Numbers list.

Menu 01 2, Answered Calls


Press * then / or / to scroll the list.

This shows the calling phone numbers of the ten most recent calls you've

answered. If the number listed is stored in your personal directory,

press ABC to view associated names. Also, you can press Menu 01 2 toaccess this list.

Menu 01 3, Missed Calls

When you miss a phone call, your phone will display 1 MISSED CALL. Simply

press List to view the number. If you wish to view the number later,press Quit.

You can view the number later by using the following step.


Quickly press * twice (a + will appear on the display), then press / or

/ to scroll the list.


14/37

This shows you the calling phone numbers of the 10 most recent calls

you've missed. Menu 013 also accesses the Missed Calls list.

Notepad

Use the Notepad to store names and numbers that you don't want stored inyour personal directory. The Notepad holds up to 10 names and numbers.

To store numbers and names in notepad

1. Enter name and number as you normally would, but at STORE IN LOCATION,

press #.

2. Press OK.

See "Your Personal Directory" in Faxback Doc. # 48319 for details onstoring numbers.

To see numbers and names in notepad


Press #, then / or /.

The top right corner of the display shows the location number of the

notepad (0 degrees - 9 degrees).

To clear temporary lists and notepad

Press Menu 01 4.

This clears Dialed Numbers, Answered Calls, Missed Calls, and the notepad.

You cannot undo this operation, so be careful!

Menu 01 7, Call Timers

This feature is for those of you who want to keep track of calls for

billing purposes. Your phone has separate call timers for each phonenumber (NAM) your phone uses. This shows call durations for the NAM that

is currently selected.

Use Menu 01 7 and press / repeatedly to show durations of LAST CALL. ALLCALLS, HOME AREA CALLS, ROAMING CALLS & LIFE TIMER.

Note: The actual time invoiced for calls by your service provider may

vary, depending upon network features, rounding off for billing,and so forth.

To clear Call Timers

Use Menu 01 7 6 to clear all call timers. You must enter the security

code to clear all call timers. Note that the Life Timer, which is a


15/37

running total of all calls made and received with your phone, cannot bereset.

|Label: NOKIA

Nokia 2160

The Nokia 2160 series hand portable CMT uses an EEPROM NAM that can beprogrammed directly from the standard user keypad. In order to access theNAM, you must enter the special access code currently programmed into the

phone. Once the programming mode is accessed, NAM parameters are loaded

by entering them into the display and "storing" them to selected memorylocations. Be sure to obtain all parameters before proceeding.

EASY NAM PROGRAMMING

1. Turn on phone.

2. Enter the Easy NAM access code. Access code is: *#639#

3. Verify the display now reads "Cellular Number" and enter the 10 digitMIN for the phone.

4. Press the softkey under the word "OK" in the display. If less than 10digits are entered an error message will prompt you to reenter the

number.

5. Verify the display reads "Enter code" and enter the five digit SIDfollowed by four zeros. (Example 001750000 is a SID of 175 followed

by four zeros). An error message will display if an incorrect entryis made. Do not add more than four zeros to the code.

Note: Change the Lock code by adding a pound sign and new lock code afterthe code. (Example: 001750000#7788. Lock code = 7788).

Change the Language code by adding a pound sign (#) and new

language code after the code. (Example: 001750000#2. Language = 2)

Language Code: 0 (default) = English, 1 = French, 2 = Spanish,

3 = Portuguese

Change the Lock code and Language code by separating each set ofnumbers by a pound sign. (Example: 001750000#7788#2). The SID =

00175, Lock code = 7788, Language = 2 (Spanish).

6. Press the softkey under the word "OK" in the display.

7. The display will tell you that the activation was OK and instruct youto power the phone off, then on again. When the phone powers back up,

it will automatically select the correct system (A or B).

ACCESS NAM PROGRAMMING MODE:

1. Turn the phone on.


16/37

2. Enter the NAM access code. Factory default is: *3001#12345

3. Enter softkey [MENU].

4. If this screen appears, you have entered the access code correctly:

____________| Field Test || >NAM 1 |

| NAM 2 |

|____________|

SELECTION FROM THE MAIN LEVEL MENU (FIRST LEVEL OF NAM MENU):

5. Press the scroll key up or down repeatedly until the desired main menuselection is displayed. Select from:

NAM 1 NAM 2 NAM 3

Serial No. Programmed Field Test

Security Code Emergency Number SW Version

6. Press softkey [SELECT] to access the second level menu for your mainmenu selection.

PROGRAMMING NAM's 1 THROUGH 3 (SECOND LEVEL OF NAM MENU):

7. Press the key up or down to scroll through the selected NAM

information list. Select from:

HOME SYSTEM OWN NUMBER PSID/RSID LISTS (Note 1) CHANGE DEFAULTS

"CHANGE DEFAULTS"

NAM STATUS ACCESS METHOD LOCAL OPTION PRIMARY PAGING CH

SECONDARY PAGING CH DEDICATED CCH A DEDICATED CCH A NBR DEDICATED

CCH B

DEDICATED CCH B NBR OVERLOAD CLASS GROUP ID ROAMING STATUSA-KEY

8. If the value is incorrect, press softkey [SELECT] and use the numeric

keypad or key to make any needed changes.

9. Enter softkey [OK] to save the value.

10. Repeat steps 7 through 9 for the remaining NAM info items to be viewedand/or changed.

11. To program other NAM's, press [QUIT] to return to the Main Level Menu

list. Select NAM 2 or NAM 3. Once the Home System ID and Own numberare programmed, the phone will automatically set the NAM Status to

enabled.


17/37

PROGRAMMING THE SECURITY CODE:

12. From Main Level Menu use the key to select the "Security" menu, press

[SELECT] and the current 5-digit security code will appear in thedisplay. Default is 12345.

13. If you wish to change the Security code at this time, use the numerickeys to change the value.

14. Press the softkey [OK] to store changes.

PROGRAMMING EMERGENCY NUMBERS:

15. From Main Level Menu use the scroll key to select the "Emergency"menu. Press softkey [SELECT] to enter the emergency numbers.

EMERGENCY NUMBER 1 (911) EMERGENCY NUMBER 2 (*911)

EMERGENCY NUMBER 3 (None)

16. If you wish to change the displayed value, use the numeric keys tomake changes. Use the scroll key to select the emergency number you

wish to change and press [SELECT].

17. To save the value, press softkey [OK].

18. Press [QUIT] to exit the menu.

SW VERSION:

19. From the Main Level Menu use the scroll key to display the "SW

version" menu, press [SELECT] to view software version, date andproduct type.


SERIAL NUMBER (ESN):

21. From the Main Level Menu, use the scroll key to display the "SerialNo." or ESN of the phone.


PROGRAMMED: (DATE THE PHONE IS FIRST PROGRAMMED)

23. From the Main Level Menu, use the key to display the "Programmed" menu.

24. Press [SELECT] and enter a four digit number that corresponds to the

month and year the phone is sold. Example (mmyy) 0197 = January 1997,0996 = September 1996.

Note: This menu location can be programmed only one time. Once the date

has been entered it cannot be changed. Any attempt to enter the


18/37

menu once it has been programmed will receive a short beep and themessage "DATE ALREADY STORED".

EXITING NAM PROGRAMMING:

25. To exit the NAM programming mode, turn the phone off and leave it off

for five seconds.

FIELD TEST:

26. The FIELD TEST MODE is used to investigate how the phone is reactingto the cellular system. The FIELD TEST information covers signal

strength, battery charging, cellular state and encryption status. Theinformation is organized to display information relating to Analog

Control Channels, Digital Control Channels, Analog Voice Channels andDigital Voice Channels. All the information provided in the FIELD

TEST display is in accordance with IS-136.

For further information about the FIELD TEST mode, contact Nokia

Customer Service at 1-800-456-5553 and ask for Nokia Field ServiceBulletin ?????.

27. To activate the FIELD TEST mode you must be in NAM programming.Instructions for entering NAM programming are listed above. Use the

following steps to enable the FIELD TEST mode.

28. From the main menu use the scroll key to display the "FIELD TEST" menuand press the softkey [SELECT]. Use the key to select ENABLE and

press the softkey [OK].

29. Turn the Nokia 2160 off then back on. Once the power up self test is

complete, the FIELD TEST display will begin automatically. Scrollthrough the different displays using the scroll key.

30. To disable the FIELD TEST mode, return to NAM programming and disable

the function under the FIELD TEST menu.

PROGRAMMING PSIDS AND RSIDS:

The Nokia 2160 provides the option to program Private (PSIDs) and

Residential (RSIDs) System ID's as prescribed by IS-136. The PSID/RSIDlist is programmed to support selection/reselection processes, system

selection, and SID display functions. Programming the PSID/RSID list ispart of the NAM programming menu. All three NAMs have their own PSID/RSID

list. Follow these instructions to program the PSID/RSID lists.

1. Enter the NAM programming menu and select NAM 1 (or the desired NAM).(NOTE: PSID/RSID is currently only available in the NAM 1 location.

PSID/RSID is included in NAM 2 and 3 for future use.)

2. Use the scroll key to display "PSID/RSID LISTS" and press [SELECT].

3. Use the scroll key to select the P/RSID 1 or the desired P/RSID (1


19/37

through 5). Press the [SELECT] softkey.

4. Each list contains:

System type Select Private or Residential system type.

PSID/RSID System ID for the Private or Residential system.Indicates which PSID/RSID the mobile will respondto.

System ID Connected System ID. The SID the PSID/RSID isconnected to.

Alpha Tag The name of the Private or Residential SID.

Operator Code(SOC) This is the System Operator code. (US-McCaw

Cellular = 001 (dec), Canada-Rogers Cantel Inc.= 002 (dec) and McCaw Cellular Communications (for

international) = 2049 (dec).

Country Code Enter the country code of the PSID/RSID.|

Label: NOKIA

Nokia 2110i*#06#

for checking the IMEI (International Mobile Equipment Identity)Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP



To view Week and Year of manufacture enter *#3283# [*# D A T E #]

The last two digits are the year. If the year is 95, the first two digits are the month.For 96 the first two digits are the week of the year.

To view the software version on 2110e / 2110i enter *#170602112302# or

*#9999#On newer phones, the code has been changed to *#682371158412125#

Service Prover Lock

The service provider (SP) lock is used to lock the cell phone to the SP's SIM card.Once the cell phone is locked to a specific operator, if one inserts a SIM card from a

different operator the phone will refuse to accept it! The cell phone will howeveraccept another SIM card from the same operator.


20/37



The main code used in Nokia phones is:#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).Use the * key to get the p, + and w chars.'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.


#pw+1234567890+3# for Country-Lock status#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS

W = PRESS "*" THREE TIMESP = PRESS "*" FOUR TIMES

+ = PRESS "*" TWO TIMES



Eg. To remove restriction on lock 1 type following code:

#pw+(master code)+1#If you just want to check your phone use 10 random numbers Eg. 1234567890 as

the (master code)eg. To check ifphone ifrestricted on lock 1 type the following code:

#pw+1234567890+1#


possible to type in about 3 different codes on each lock! Then something bad willhappen ..therefore be careful!

Bypass the SP lock

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can

bypass the SP lock like this:1: Insert sim card of diferent provider.

2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it andthe phone says PIN CODE?

3: Press the "C" key.4: Then Press * and wait until it desapear and apear again, then press * one more

time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card isaccepted until you restart the phone again. NOTE: On version 5.04 Nokia has

removed this option !

Cell-sitesTo enable display of cell-site names, [MENU] 4 9 1


21/37

Received callsTo see received calls. Same As menu options (012)

Enter : * then Memory then Find or * then the down arrow Missed calls

To see missed callsSame as menu option (01 3)

Enter : + then Memory then Find or + then the down arrow

DTMF tones

Pressing Menu, then Green Phonebutton allows you to transmitt DTMF tones

Carkit Programming

If you use a carkit with handsfree AND additional handset, and you want to switchfrom handset to handsfree: Press the left menu button, and put the additional

handset on hook. Now you are on handsfree|

Label: NOKIA

Nokia 8850

*#06#for checking the IMEI (International Mobile Equipment Identity)

*#0000#To view Software Version.

Latest software version: V 5.11 09-12-99 NSM-2

Older version: V5.08

|Label: NOKIA

Nokia 7110*#06#

for checking the IMEI (International Mobile Equipment Identity)

*#0000#To view Software Version.

*#3370#Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370*

Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720#Half Rate Codec activation. It will automatically restart

*#4720*

Half Rate Codec deactivation. It will automatically restart

*#746025625#Sim clock allowed status.


22/37

*#92702689# [*#war0anty#]Takes you to a secret menu with 6 choices:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture (0997)3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repairment - if found (0000)5. makes you capebel of transferring user data if you have the gear for it6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not workwith this version.

V 4.76 13-01-00 NSE-5

V 4.75 07-01-00 NSE-5V 4.73 15.11.99 NSE-5

|Label: NOKIA

Nokia 6190*#06#Checking the IMEI (International Mobile Equipment Identity)

*#6190#

Shows the SW version.

*#92772689#(after removing the analog module) shows service menu.

*3001#12345[OK]

to enter test mode.

*#639#

to change NAM.|

Label: NOKIA

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689#Checking ISDN number.

*3001#12345#

For field test mode and nam selection and some other stuff...

*#9999#Shows the SW version.

|Label: NOKIA

Nokia 6080 / 6081

*#06#For checking the IMEI (International Mobile Equipment Identity)


23/37


Latest software version on 6080 :

V 4.80 NHE-2

Latest software version on 6081 :V 5.14 NHE-2A|

Label: NOKIA

Nokia 3810

To view IMEI number*#06#

To view Software Version enter

*#3810#|

Label: NOKIA

Nokia 2010To view IMEI number

*#06#

To view Software Version enter*#9999#

|Label: NOKIA

Nokia 1610 / 1611

*#06#

For checking the IMEI (International Mobile Equipment Identity)


Latest software version on Nokia 1610:

v 5.15 (25.02.97) NHE-5NX - older version V 4.19

Latest software version on Nokia 1611:

V 4.03 NHE-5SX|

Label: NOKIA

Nokia 8810IMEI number

*#06#

Software Version*#0000#

1st Line - Software Version

2nd Line - Date of Software release


24/37

3rd Line - Phone Type.

Serial Number*#92702689#

1st Screen - Date ofphone manufacture

2nd Screen - Serial #, IMEI3rd Screen - Purchasing date4th Screen - Last Repair Date.

|

Label: NOKIA

Nokia 101 cell phones LockcodeNokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code

circumvented by the following method:

Type: * 3001 # 12345 [STO] 00Wait for: NOT DONE

Type: [RCL] 01

Clear old lock code (the last four digits) and enter a new lock code. Be very careful

not to delete other characters.

Type: [STO] 01 [STO]Turn power off.

|Label: NOKIA

Nokia 6150

Check the IMEI

*#06#

Service menu*#92702689#

Show software version

*#0000# or *#6110#

Sim Clock Stop

*#746025625#

Warranty menu*#92702689#

Press the following warranty code

6232 (OK) Displays the Month and Year of Manufacture

7332 (OK) Displays the date of the last repair

7832 (OK) Displays the date where the phone was purchased


25/37

9268 (OK) Displays Serial Number

37832 (OK) Set the Purchasing Date MMYY

87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone toanother

Power Button TipIf you press the button for a short moment, the menu with the profiles is shown

on the display. If you press one more time, the mobile turns itself off. You can

use the up and down cursor keys to scroll and enable a different alert setting.

The 54# TipType 1#, 2#........54# on the keypad (when you're not in the menu) to get the

phone number used for with this key when speed dialing.

Toggle Headset and Auto settings#1: Try Connect the pin-out 1-2 (in front from the right.) to toggle headset

settings (The phone will think that you ar using a headset - "headset" is

displayed in the LCD)#2:Try Connect the pin-out 2-3 (in front from the right.) to toggle autosettings (The phone will think that you ar using it in the car - "auto" is

displayed in the LCD)

Call Menu(In a call) you can press and hold down the menu button for 3 sec. and a menu

appears. (transfer, mute etc.)

Quick SMS TypingWhen typing SMS messages, you have to wait some seconds before you can type the

next letter if it is in the same button than the previous one. For example tryto write the word "letter", you have to wait before you can enter the second

"t". A much faster solution is to press the # button twice and then the letter"t".

|Label: NOKIA

Nokia 8110Check the IMEI

*#06#

Check software version*#8110#

Sim Clock Stop

*#746025625#

Warranty menu*#92702689#

Press the following warranty code


26/37

6232 (OK) Displays the Month and Year of Manufacture

7332 (OK) Displays the date of the last repairment

7832 (OK) Displays the date where the phone was purchased

9268 (OK) Displays Serial Number

37832 (OK) Set the Purchasing Date MMYY

87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone toanother

Hands Free

To continue an existing call when placing the 8110i into the hands free car kitwithout it dropping the call, press the Memory button just before connecting the

cable and placing it in the cradle.

Display extra text in call costs feature

If your network operator doesn't offer a call costs service, you can still makeuse of that function to display some personalised text on the screen of your8110i. Go to Menu, [5], [7], [1], enter PIN2-code and choose Set. Then type in

the limit of the currency units you're using (if the call cost service worked,you would have to type the cost limit of the calls) and choose OK. In this case

I typed 8110. Then go to the next submenu (Menu, [5], [7], [2]), the Show costsin menu. Type in the PIN2 code again and select Currency. Type in the unit

price, in this case number 1. Then type the name of the currency - you can useany string of letters and numbers 1-3 characters long. then type 2 letter then

to confirm type two names beginning with one of each of the letters. Then pressOK to confirm it.

Quick saving while in callSaving numbers to memory during a call If you type a number into your phone

during a call, you will lose it when the call ends. To prevent this happeningjust hold down Memory button -- the number will be saved (with no name) to the

next available memory location.

Deleting SMS messages quickly

When reading an SMS message, instead of pressing Option, Erase to delete themessage, simply press [C].

Turning lights on temporarily

If you have display lights turned off, you can turn them on by quickly pressingand releasing the power button. They will stay on as long as you are pressing

button.

Silent mode temporarilyYou can put your phone into silent ringing mode temporarily by pressing Menu

then [#].

Closing the cover without ending a callIf you press the menu key and then close the sliding cover during a call you

will not end your call.


27/37

|Label: NOKIA

Nokia 3585

1. Enter ## followed by the OTKSL2. Number (MDN) is highlighted. Press the upper left-hand soft key to select

3. Mobile Number will display. Enter the 10 digit MIN4. Press OK5. IMSI will appear. Press and hold the Clear key until the display is empty.

6. Enter 31000 plus the MSID (15 digits total)

7. Press the upper left hand soft key and select OK8. It will take you back to the SVC Programming. Press the upper right hand soft key

to select EXIT9. Press END.

10. Phone will power cycle and programming is complete.


28/37

*** WARNING: Using secret codes may be harmful to your phone and result in

disabling or worse. Use these codes at your own discretion, we accept no responsiblility

for blocked pones while using these codes!!!IMEI Number

*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)

XXXXXX XX XXXXXX XTAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code of the approval-country )

FAC = Final Assembly Code: (01,02 = AEG)(10,20 Nokia)

(40,41,44 Siemens)

(30 Ericsson)

(50 Bosch)(51 Sony,Siemens,Ericsson)

(60 Alcatel)

(65 AEG)

(70 Sagem)(75 Dancall)

(80 Philips)(85 Panasonic)

SNR = Serial Nr.

SP = Spare (always "0")

Software Version

*#0000# shows the software version

Signal Processing*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.

#3370# - Enchanced full Rate Codec (EFR) deactivation

*4720# - Half Rate Codec activation. It will automatically restart.#4720# - Half Rate Codec deactivation

Enchanced Full Rate will give you much better sound quality when you enable it. The

new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCodeExcitation Linear Prediction) compression technology. This technology allows for much

great voice quality in the same number of bits as the older Full Rate CODEC. The older

technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse

Excitation). Both operate at 13 kilobits.(but you take up more space on the network, sothey can charge you more) - Talk-time is reduced with about 5%

Sim Clock Stopping

*#746025625#[*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which

will save battery time. This code doesn't work with software version 4.59.

It will tell you if it can be stopped or not.


29/37

Warrenty Menu*#92702689# takes you to a secret menu with 6 choices:

[*#war0anty#]

1. Displays Serial Number.2. Displays the Month and Year of Manufacture (0997).

3. Displays (if there) the date where the phone was purchased (MMYY).

4. Displays the date of the last repairment - if found (0000).5. Makes you capable of transferring user data if you have the gear for it.

6. Shows how long the phone has been used to talk. This counter is not reset by when you

"clear timers" like the counters in the call register.

Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx

1. Insert SIM card of different provider.

2. Turn on the phone and press the UP VOLUME key for 3 sec.Then release it and the phone says PIN CODE?

3. Press the "C" key.4. Then Press * and wait until it disappears and appears again, then press * one more time

and 04*PIN*PIN*PIN#

Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)

The settings for radar speed traps detector. Your Nokia cell phone can be programmed to

pick up radar speed traps, when programmed your cell phone picks up the radar and alertsyou on the message alert tone. ( Doesn't work with Nokia 7110! )

1. Enter your menu

2. Select settings3. Select security settings

4. Select closed user group

5. Select on6. Enter 00000

7. Press ok

8. Clear back to normal, within a few seconds your phone will display a radar sign with

five zero's next to it. It is now activated.Unfortunately only Nokia phones have this function. The Cell Phone info display needs

to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off

your phone, or even each time you loose contact with your carrier, you'll have to activateit again... It is done using steps 1 through 5 above, but the number (00000) will be

already on the field as a default.

The James Bond Trick


30/37

If you short-circuit the left middle and right pins on the bottom of the phone with all

connections touching each other, the Nokia software hangs! The profile "Headset" will be

activated. Before you do this just activate the "Automatic Answer" in the headset profileand set the ringing volume to "Mute". Now you can use your phone for checking out

what people are talking about in a room. Just place it under a table in a room and call it.

The phone receives the call without ringing and you can listen to what people are saying!Network Monitor

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to

re-program some chips inside of your phone.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

Take apart the phone.

De-solder the EEPROM (ATMEL AT 24C64)

Read out the data with an EEPROM programmer and save it to a file (Backup)If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"

If you have v5.24 then change the address "0378" from "00" to "FF"

Write the new data to the EEPROM and solder it back to the phone

Power on your phone and you should have "Netmonitor" enabled.The Network Monitor gives you the following information:

Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1(Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL

(Radio link timeout), Timeslot, Indication of the transmitter status, Information on the

Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification

(Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobilenetwork code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX

(On/Off), Discard cell barred information.

Game Hacking with Blizzard

Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet(note: Downloading cracked/Hacked games is illegal unless you already own a copy of

game)

The Blizzard Nokia N-Gage Installer.

1. Unpack Blizzard.sis file that you get from mIRC2. Transfer the .sis file to your N-Gage

3. Get the .blz (N-gage ROM) from mIRC

4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card5. Use the Blizzard application to unpack the .blz file

6. After unpacking the sonic icon should appeared in the MENU

7. Clicked sonic icon and it should work !

List of compatible games for the 3650,6600 and the N-gage that work:


31/37

[3650]

SonicN (v.2.5+)

Puyo Pop (v.2.5+)[6600]

SonicN

Puyo PopPandemonium

Tomb Raider

Super Monkey BallTony Hawks Pro Skater

[N-Gage]

SonicN

Puyo PopPandemonium

Tomb Raider

Super Monkey Ball

Tony Hawks Pro SkaterGSM Network Services Command Strings

When various network functions are selected via the cellphone's menu using the keypad,the cellphone automatically generates the corresponding GSM network command string

and transmits it to the network. These commands can however be manually entered via

the keypad.

Each command is prefixed with either one or two * or # characters as follows:

** Register and Activate* Activate

## De-Register (and Deactivate)

# Deactivate*# Check Status

Call button

Once each command has been entered, if it is a network command (as opposed to a local

handset command) it must be transmitted to the network by pressing the YES (receiver)

key which acts as an enter key - this is represented here with the character. Alwaysenter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).

Command Description Command String

SecurityChange call barring code **03*OldCode*NewCode*NewCode#

Change call barring code **03*330*OldCode*NewCode*NewCode#

Change PIN code **04*OldPIN*NewPIN*NewPIN#Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#

Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#

Unlock PIN2 code (when PIN2 is entered wrong 3 times)

**052*PUK2*NewPIN2*NewPIN2#


32/37

Display IMEI *#06#

Call Forwarding (Diversions)

De-register all call diversions ##002#Set all configured call diversions to number and activate **004*number#

De-register all configured call diversions (no answer, not reachable, busy) ##004#

Unconditionally divert all calls to number and activate **21*number#Activate unconditionally divert all calls *21#

De-register unconditionally divert all calls ##21#

Deactivate unconditionally divert all calls #21#Check status of unconditionally divert all calls *#21#

Divert on no answer to number and activate **61*number#

Activate divert on no answer *61#

De-register divert on no answer ##61#Deactivate divert on no answer #61#

Check status of divert on no answer *#61#

Divert on not reachable to number and activate **62*number#

Activate divert on not reachable *62#De-register divert on not reachable ##62#

Deactivate divert on not reachable #62#Check status of divert on not reachable *#62#

Divert on busy to number and activate /td> **67*number# *#330*code#

Documents

Nokia Hot Codes