Embed Size (px)
Citation preview
NOISE AND VIBRATION SOLUTIONS
ACOUSTIC FLOOR BLOCKSINSTALLATION GUIDE
NOISE AND VIBRATION SOLUTIONS
Date
Title
Insert the Floor Blocks in the profile
Insert the Floor Blocks in the profile with thedistance between mounts according to thedistribution that has been defined for the solutionof the project. It is recommended that thedistance between Floor Blocks does not exceed600 mm.
As the Floor Block has a width of 50 mm, thesuitable profile is Placo® Rigi 60. It is a standardprofile that is commonly used by plasterboardmanufacturers.
Profile a (mm) b (mm) d (mm)
Placo® Rigi 60 60 28 5
NOISE AND VIBRATION SOLUTIONS
Date
Title
Place the profiles on the floor
Place the profiles on the floorwith the distance betweenthem according to thedistribution that has beendefined for the solution of theproject.
It is recommended that thedistance between profiles doesnot exceed 600 mm.
NOISE AND VIBRATION SOLUTIONS
Date
Title
Place the mineral wool
In case it is defined in thesolution for the project, placethe mineral wool betweenprofiles.
NOISE AND VIBRATION SOLUTIONS
Date
Title
Install a layer of a rigid material
A layer of a rigid material has to be placed over the profiles, covering the entiresurface of the concrete slab. It can be made of wooden boards or corrugated metalsheets.
The joints between the rigidmaterial panels must be sealedto prevent leakage of theconcrete.
NOISE AND VIBRATION SOLUTIONS
Date
Title
Place an elastic perimetral material
The concrete slab must be elastically decoupled from the walls to avoid acousticbridges. For that, perimetral insulating strips should be used, with a width thatexceeds the top surface of the floating slab.
NOISE AND VIBRATION SOLUTIONS
Date
Title
Pour the concrete
Pour and spread the concrete until a homogeneous slab of a thickness defined inthe solution of the project is achieved.
