NodeB Commission new

8/2/2019 NodeB Commission new

1/20

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 1

System commissioning procedure

Check the hardware installation

Power On

Step 3: Download the Data Configuration Files

Use the LMT to login the NodeB

Step 4: RST NODEB

Step 5: Check the transmission status

Step 1: Check the NodeB softwareversion, determine upgrade the NodeB

or Not

Step 6: Commissioning the transmission

Step 7: Check the local cell status

Service validation

Step 8: Check the VSWR

Step 2: Prepare the Data Configuration Files

Note: step 1 to 8 will beexplained in detail


2/20


Step 1: Check the NodeB Version

Other commands: LST SOFTWARE:; LST VER:;


3/20


LST SOFTWARE:;


4/20


LST VER:;


5/20


Step 2: Prepare the Data Configuration file

Configure the NodeB Data Configuration file by CME tool;

Export it to be NodeBCfg.xml file

Copy the file (NodeBCfg.xml) to your lap-top;

References:LMT and CME installation and Start Guide

DBS3800 Data Configuration (CME)

Upgrade the NodeB Software and Download the NodeB Data File


6/20


1) Open the Data Configure File Transfer Window

Step 3: Download the DataConfiguration file


7/20


2) Input the file path of NodeBCfg.xml



8/20


3) Download the NodeBCfg.xml



9/20


4) Download the NodeBCfg.xml in progressing


St 3 D l d th D t


10/20


5) Download the NodeBCfg.xml successfully



11/20


Step 4: Reset NodeB

When a NodeB is reset, all the boards in it are reset and the services carried on it are disrupted.

S Ch k h i i


12/20



DSP E1T1:

If the status isnt Normal , please refer to the NodeB trouble shooting.


13/20



DSP IMAGRP:;

If the status isnt Normal , pleaserefer to the NodeB trouble shooting.


14/20


Step 6: commissioning the transmission

Check the status of NBAP by DSP IUBP:;



15/20


Check the status of ALCAP by DSP AAL2NODE:;



16/20


Check the status of AAL2PATH by DSP AAL2PATH:;



17/20


Step 7: Check the local cell status

IF local status unavailable or have faults please refer to the NodeB trouble shooting.


18/20


Step 8: Check the VSWR Value

Note: The value must be less than 1.5, normally it should be 1.3 or less.Others pleaserefer to the NodeB trouble shooting.


19/20


NOTES:

If the upper items are not available, check the lower layer status

Check the ATM layer negotiating parameters

Check the physical lower parameters

All the command parameters please get help from the online help

information


20/20

Thank You

www.huawei.com

Documents

NodeB Commission new