Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
# Sku Specification EN 388 SizePackaging
Pairs/Box
Hand cream for workers
1 08801Hand cream for workers. Regenerates and revitalized the skin dry.
8 essential ingredients to 8 desired benefits : restorative, moisturizing, protective, non irritating,
deodorant, natural, astringent, absorbent
- 100 ml / 3.4 fl oz72 tube/box
18 Lbs
dozen
Handling precision gloves
1 COT/P/D
100% cotton knitted glove gauge 10
Seamless
Ambidextrous, elastic wrist.
Comfort and excellent dexterity
- 7 & 9
300 pairs/box
22 Lbs
dozen
2 MONOWhite seamless knitted glove in 100% texturised polyamide, 13 gauge,
ambidextrous, elastic wrist214X 9.10
300 pairs/box
24 Lbs
dozen
3 S01B2Polyester liner glove with black nitrile palm
Excellent grip4131 7.8.9.10.11
120 pairs/box
18 Lbs
dozen
4 S01NPBlack Polyester glove with nitrile coated palm and fingers
Ideal for greasy mechanical work 4121 10 (XL)
120 pairs/box
18 Lbs
dozen
5 S003Light Polyester knit glove coated with an black hypoallergenic nitrile rubber material to provide an
excellent grip4121 7.8.9.10.11
144 pairs/box
13 Lbs
dozen
6 S003E** WITH LABEL **
Polyester glove with nitrile rubber coating on the palm and fingers
Lightweight, hypoallergenic and breathes.
4121 7.8.9.10.11
144 pairs/box
13 Lbs
dozen
7 S09Microfiber nylon knit glove coated with an Micro foam water PU 18 Gages.
Extra thin to offer extra dexterity with an excellent grip. 2111 6 7 8 9 10 11
144 pairs/box
7 Lbs
dozen
8 S011 Nylon liner glove with beige nitrile palm and fingers. 13 gages. 4131 6 7 8 9 10 11
144 pairs/box
17 Lbs
dozen
9 S001Nylon knitted. Palm and fingers grey nitrile coated. Excellent grip in oily and wet conditions, wrist
fit. Very abrasion resistant. 4131 XL. XXL
200 pairs/box
27 lbs
ten
Standard EN 388
Protection against mechanical hazards is expressed by a pictogramfollowed by four numbers (performance levels), each representing test performance against a specific hazard.
The ‘Mechanical Risks’ pictogram is accompanied by a 4-digit code:
a. Resistance to abrasion: based on the number of cycles required to abrade through the sample glove.b. Blade cut resistance: based on the number of cycles required to cut through the sample at a constant speed.c. Tear resistance: based on the amount of force required to tear the sample.d. Puncture resistance: based on the amount of force required to pierce the sample with a standard sized point.
Brand
This standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, puncture and tearing.
19 %
24 %
# Sku Specification EN 388 SizePackaging
Pairs/Box
Multi-purposes work gloves
1 S02YYellow polyester knit glove with green latex palm
22428(M). 9(L).
10(XL). 11(XXL)
120 pairs/box
28 lbs
dozen
2 S002
Blue nylon and cotton knitted, robust Handling Glove With a good grip and protection. Palm and
Fingers Coated with Vulcanized Latex. Asepticized to prevent odors and fungus, wrist fit 2141 M.L.XL
120 pairs/box
28 lbs
dozen
3 S3NBBKnit glove 13 G. black nylon. Blue nitrile coating and
another coating of microfoam PU water-based: dual protection
Grip in wet and dry environments with good protection4131 8.9.10.11
120 pairs/box
28 lbs
dozen
4 EXTRAFIT100% blue polyamide, 10 gauge, seamless knitted glove, with elasthane, grey CLEAN PU
polyurethane coating on palm and fingertips, elastic wrist4242
6.7.8.9
10.11.12
200 pairs/box
25 Lbs
ten
5 S1005SSplit leather glove
Keystone thumb with reinforcement
Abrasion resistant
- M. L.
120 pairs/box
44 lbs
dozen
6 S3AP No logo
Split leather glove. Cotton back.
Palm 3 pieces. Cuff 2" 3/4
Good abrasion resistant - 10
120 pairs/box
37 lbs
dozen
7 S3A No logo
Split leather glove. Cotton back.
Palm 1 piece. Cuff 2" 3/4
Good abrasion resistant - 10
120 pairs/box
61 lbs
dozen
8 S3ADP No logo
Split leather glove. Cotton back.
Double palm. Cuff 2" 3/4
Very good abrasion resistant - 10
120 pairs/box
66 lbs
dozen
9 S417HYMDriver glove goatskin palm and cotton back.
Excellent dexterity and supple.- M. L. XL
72 pairs/box
17 lbs
dozen
10 S7American cut. Grain cowhide Leather glove, golden color, striped cotton back, 2''75 rubberized
cotton Cuff - M/L
120 pairs/box
48 lbs
dozen
11 S7B No logoAmerican cut. Grain buffalo Leather glove, grey color
Blue cotton back, 2''75 rubberized cotton Cuff - S.M.L
72 pairs/box
34 lbs
dozen
12 S7C No logo
Cow leather glove. Cotton back.
Lined cotton palm.
Cuff 2'' 3/4
10
120 pairs/box
50 lbs
dozen
13 S1005 All grain leather, golden color. Keystone thumb. Adjusted cut with rubber band on the wrist - M.L
120 pairs/box
32 lbs
dozen
14 S1005G No logo Driver glove all goatskin, highly resistant. Keystone Thumb. - M.L.XL.XXL
144 pairs/box
24 lbs
dozen
Brand
New product
New product
New product
New product
10 %
10 %
9 %
# Sku Specification EN 388 SizePackaging
Pairs/Box
High Performance glove
1 F151G
*With label *
Goatskin at palm and fingers.
Polyester & Spandex back.
Ajustable wrist with velcro
Dexterity | Supple | Durability
- 7.8.9.10.11
144 pairs/box
33 lbs
dozen
2 F152G
*With label *
Goatskin at palm and fingers.
Polyester & Spandex back. Neoprene on knuckle.
Gel foam palm
Ajustable wrist with velcro
Resistant : Less wareness and reduce the impact of vibrasion | Supple | Durability
- 7.8.9.10.11
144 pairs/box
41 lbs
dozen
3 F153S
*With label *
Palm synthetic leather
Polyester & Spandex back.
Ajustable wrist with velcro
Dexterity | Grip | Durability
- 7.8.9.10.11
144 pairs/box
28 lbs
dozen
4 F154S
*With label *
Palm synthetic leather with PVC grippy on palm and tips.
Polyester & Spandex back with reflector. Cotton thumb.
Ajustable wrist with velcro
Supple | Durability | Grip
- 7.8.9.10.11
144 pairs/box
36 lbs
dozen
5 F155SD
*With label *
Palm synthetic leather with PVC grippy on palm and tips
Polyester, Spandex and neoprene with reflector
Neoprene wrist ajustable with velcro
Inside 40 gram Thinsulate lining
Cool resistant | Supple | Durability | Grip
- 8.9.10.11
144 pairs/box
42 lbs
dozen
Standard ISO 13997
ANSI
Standard EN 407 Protective gloves against thermal risks
X(1) X(2) X(3) X(4) X(5) X(6) (There are 4 levels, 4 being the best resistance)
1 Flame retardancy 4 Resistance to radiant heat
2 Resistance contact heat 5 Resistance to small splashes of molten metal
3 Resistance to convective heat 6 Resistance to large splashes of molten metal
Standard EN 511 Protective gloves against cold
X(1) X(2) X(3) (There are 4 levels, 4 being the best resistance)
1 Convective cold
2 Contact cold 3 Waterproofing
Brand
Unlike the 388 (cut resistance) to which it is applied a constant force, ISO 13997 allows variation and determine the force needed to be applied to the blade to pass through the sample on a 20mm stroke The higher the force required, the greater the glove is cut resistant. The ISO 13997 standard is increasingly recognized by users and manufacturers of protective gloves, as the most reliable for assessing highly resistant gloves cut "
ANSI is the US representative to the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). These are technical standards specifications or technical requirements for products (quality, employment skills, use, etc.).
# Sku Specification EN 388 SizePackaging
Pairs/Box
Cut resistant gloves
1 PI6-3BK
Knitted glove HPPE including glassfibres
Polyurethane coating at palm and fingers
Cut resistance level 3, Excellent abrasion 4343 7.8.9.10.11
120 pairs/box
20 lbs
dozen
2 S043
Nylon knitted glove.
Rubber nitrile at palm and fingers.
Cut resistant 3, hypoallergenic and supple4343
S. M. L. XL. XXL
72 pairs/box
11 Lbs
dozen
3 POWERFITSeamless knitted glove (gauge 13) in 100% high density polyethylene filament with elastane. Grey
CLEAN PU coating on palm and fingertips. Elastic wrist4343
6.7.8.9.10
11.12
200 pairs/box
22 Lbs
ten
4 POWERFIT/ESD
Knitted gloves 100% high density polyethylene and carbon wire insertion with elastane
Seamless 13 gauge elastic wrist. For your touch screens
CLEAN gray PU coating on the palm and fingertips
Anti-Static, Anti-cut level 3, non-toxic, durable and dexterity
4344 8.9.10200 pairs/box
22 Lbs
ten
5 S007Dupont® Kevlar HD® knit glove. Cut and Heat Resistant. Palm and fingers coated with Grey Nitrile
(NBR) 4442 M. XL. XXL
100 pairs/box
16 lbs
ten
6 GTD/PU/G/S/RPHigh density polyethylene and grey polyamide seamless knitted glove with elastane, 13 gauge,
CLEAN PU coating, grey polyurethane on palm and fingertips. Stitched reinforcement between
thumb and index. Elastic wrist
4443 8.9.10.11
200 pairs/box
20 Lbs
ten
7 MASTERCLEAN
Seamless knitted glove with elastane in ARGIOPEX® PLUS thread and 100% green texturised
polyamide, 13 gauge, grey CLEAN PU coating on palm and fingertips. Elastic wrist4543 9.10.11
200 pairs/box
32 Lbs
ten
8 PI6-5GYKnitted glove HPPE including glassfibres
Polyurethane coating at palm and fingers
Cut resistance level 5, Very good resistance.4544 7.8.9.10.11
120 pairs/box
21 lbs
dozen
9 SOLUTION-T5Grey 100 % TAEKI 5 fiber with light weight black HTC Nitrile palm coating
cut, fats and heat protection. 4542 8. 9.10.11
120 pairs/box
21 Lbs
dozen
10 S005A lightweight, dyneema and fiberglass knitted, cut-resistant, punctures, tears and abrasion. Palm
and fingers coated with black Nitrile/rubber (NBR)4543 6.7.8.9.10.11.12
72 pairs/box
11 Lbs
dozen
11 S005E** WITH LABEL **
A lightweight, dyneema and fiberglass knitted, cut-resistant, punctures, tears and abrasion. Palm and fingers
coated with black Nitrile/rubber (NBR)4543 8.9.10.11.12
72 pairs/box
11 Lbs
dozen
12 STEELGRIPFilament knitted glove 100% Textra @ stainless steel / elastane
CLEAN PU coating on the palm and fingertips.
Cut resistant level TDM 5, dexterity, grip and durability.
45438.9.10.11
200 pairs/box
32 Lbs
ten
13 S055Dyneema fiber knitted glove with black Nitrile/rubber palm
Excellent grip. Cut resistant 5 ANSI4543 7.8.9.10.11
120 pairs/box
20 Lbs
dozen
Brand
New product
New product
8 %
13 %
12 %
# Référence Description EN 388 GrandeurConditionnement
Paires/caisse
Cut resistant glove
14 METALFITSeamless knitted glove (gauge 10) in 100% high density polyethylene filament, 100% stainless steel
filaments and 100% black texturised polyamide thread. Grey CLEAN PU coating on palm and
fingertips. Stitched reinforcement between thumb and index
4543 7.8.9.10.11
200 pairs/box
21 Lbs
ten
16 CONFORTLIGHTPara-aramid seamless knitted glove, 13 gauge, green colour.
Ambidextrous, elastic wrist 134X 9.10.11
144 pairs/box
12 Lbs
dozen
17 CONFORTGRIP/FPara-aramid seamless knitted glove, 10 gauge, green colour, natural cow split leather on palm and
fingers4344 8.9.10.11
120 pairs/box
35 Lbs
dozen
18 X6-5GYGlove / Knitted HPPE liner, 13 G.
Knitted wrist.
Cut resistant level 5 Good dexterity454X 7,8.9.10.11
120 pairs/box
20 Lbs
dozen
19 METALFLEXSeamless knitted glove (gauge 10) in double textra® / stainless steel thread. Reinforcement between
thumb and index, ambidextrous, elastic wrist454X 9.10.11
100 pairs/box
21 Lbs
ten
20 PROTECPLUS/MSeamless knitted glove (gauge 10) in high density polyethylene thread, high tenacity thread and
100% grey texturised polyamide. Cow split leather on palm and fingertips. Elastic wrist. 7 cm cotton
canvas
4544 9.10.11
120 pairs/box
55 Lbs
dozen
21 METALGRIP/DSeamless knitted glove (gauge 10) in double textra® / stainless steel thread. Coating on the palm in
natural cow split leather with fourchettes. Elastic wrist4544 10
120 pairs/box
52 Lbs
dozen
Marque
Nouveauté
New product
Back again !
5 %
21 %
27 %
# Sku Specification EN 388 SizePackaging
Pairs/Box
COLD & HEAT resistant gloves
1 1C-K3Seamless Thermolite knit liner, ambidexter, wrist fit 15 grams. Light.
Repel humidity = keep the hands dry. Higher dexterity- S. M. L. XL.
72 pairs/box
7 lbs
dozen
2 3C-K5P4 Seamless Thermolite knit liner, ambidexter, wrist fit - S. M. L. XL.
72 pairs/box
12 lbs
dozen
3 S00815 Gages knit nylon lined. Palm nitrile foam coated.
Cold resistant with high dexterity. 4232 M. L. XL. XXL
144 pairs/box
15 lbs
dozen
4 S02DM Polyester knit glove with terry cloth fleece liner and black micro foam latex palm coating. 3222 7, 8 , 9, 10, 11
72 pairs/box
19 lbs
dozen
5 S7NICL Nitrile impregnated on cotton, Jersey liner, 3" cotton safety cuff 2222 10
120 pairs/box
49 lbs
dozen
6 S3AD No logo
Split Leather glove with cotton back
Lined with Thinsulate® 40 grams
Cuff 3"- 10
120 pairs/box
67 lbs
dozen
7 S7DR No logo
Leather glove with cotton back
Lined with brush cotton
Cuff 3"- 10
120 pairs/box
65 lbs
dozen
8 S1005DAll grain leather, golden color. Keystone thumb. Adjusted cut with rubber band on the wrist. Lined
with Thinsulate® 40 grams- L
120 pairs/box
34 lbs
dozen
9 2C-K12P5Fireproof knit liner Kermel/Viscose FR and Thermolite. Moisture repellent, heat, fire and cold
resistant, insulating, wrist fit, seamless- S. M. L. XL
72 pairs/box
10 lbs
dozen
10 RV9DB10 gauge seamless kevlar knitted liner
Natural latex crinkle finish at palm and fingers. Knitted wrist.
Cut resistant level 3 and protection contact up to 250 DC3344 7.8.9.10.11
120 pairs/box
35 lbs
dozen
11 GTAC-D27Para-aramid and 100% cotton seamless knitted glove, 7 gauge, 100% cotton 7 gauge knitted lining,
ambidextrous, elastic wrist 134X 8.9.10
60 pairs/box
29 Lbs
dozen
12 GTA/D/M100% para-aramid heavy seamless knitted glove. 100% wool knitted lining. Ambidextrous. 5'' cuff in
reproof blue cotton canvas 244X 8.9.10
60 pairs/box
29 Lbs
dozen
13 ANT/D/P15Heat resistant glove treated cow split leather
Lined with 100% wool fleece3143 & EN407 42314X 10. 11
50 pairs/box
48 Lbs
Ten
Brand
New
New
New
New
Special liquidation
# Sku Specification EN 388 SizePackaging
Pairs/Box
Welding gloves and other protection
1 SB13 No logo
Split leather 3 fingers glove.
Lined 100 % cotton. Reinforcing leather piping at seams
Total lenght 14".
Mig welder glove
- 10
60 pairs/box
38 lbs
dozen
2 SB14 No logo
Split leather glove
Lined 100 % cotton. Reinforcing leather piping at seams.
Total lenght 14".
Mig welder glove
10
60 pairs/box
42 lbs
dozen
3 SB14KR No logo
Split leather glove. Kevlar tread.
Lined 100 % cotton. Reinforcing leather piping at seams.
Reinforce palm.
Total lenght 14".
Mig welder glove Mig
10
60 pairs/box
48 lbs
dozen
4 S418CSV-5 No logo
Cow leather palm, split leather back
Cuff 5" with velcro
Welder-assembler glove, flexible
- M. L. XL
72 pairs/box
42 lbs
dozen
5 S206 No logo
All cow leather glove. Kevlar seams.
Split leather cuff 6''.
Tig welder glove. Very supple and great dexterity
10
60 pairs/box
29 lbs
dozen
6 S204 No logo
All goatskin glove. Kevlar seams.
Split leather cuff 4'' .
Tig welder glove. Very supple with great dexterity.
10
120 pairs/box
38 lbs
douzaine
7 S9TGGAll goatskin glove.
Split leather cuff 4''. Pearl color.
Tig welder glove. Supple with great dexterity
- M. L. XL
72 pairs/box
23 lbs
dozen
8 S9TDSAll split tan deer leather glove
Split leather cuff 4".
Tig welder glove. Very supple and great dexterity.
- M. L. XL
72 pairs/box
31 lbs
dozen
9 S202CSBuffalo leather palm, split leather back, water and
grease resistant. Split leather cuff 4''. Pearl color.
Tig-Mig welder glove. Supple with great dexterity
- S(8). M(9). L(10). XL(11)
72 pairs/box
26 lbs
dozen
10 S7CSE-4 Sans logoBuffalo leather palm, split leather back,
Cuff 4", Economic Welder-assembler glove- S.M.L
72 pairs/box
30 lbs
dozen
11 SB7CSSplit leather back, cow leather palm water and grease resistant
Cuff 4"
Welder-assembler glove, good dexterity- L. XL
72 pairs/box
34 lbs
dozen
Brand
New
New
New product
New product
New product
7 %
7 %
6 %
# Référence Description EN 388 GrandeurConditionnement
Paires/caisse
Welder gloves and other protections
12 GT350/DA
Natural cow split leather Glove
Lined with knitted cut resistant seamless.
Stitching thread 100% para-aramid.
Split leather cuff of 12.5 cm.
Cut resistant level 5
4544 10
50 pairs/box
33 Lbs
Ten
13 GT3505 fingers natural cow spilt leather glove, back in heatproof split leather. Glove lined with 100% para-
aramid and high tenacity fiber seamless knitted glove, 10 gauge. Cow split leather cuff of 15 cm,
100% para-aramid sewing thread
4544 10
50 pairs/box
43 Lbs
ten
14 GT350-F5 fingers natural all grain cowleather glove, lined with 100% para-aramid and high tenacity fiber,
cow split leather cuff 6'' 100% para-aramid sewing thread4544 10
50 pairs/box
29 Lbs
ten
15 SMK2T-10 No logo
100% Kevlar sleeves. 2 Ply. Length 10''
with thumb slot.
Anti-cut, heat resistant and comfort244X 10"
72 pairs/box
10 Lbs
dozen
16 MBCK/P/45100% para-aramid / elastane sleeve, double-layered, with thumb slot.
Lengths 45 cm (18 inches)244X 45cm/18 in.
120 pairs/box
24 Lbs
ten
17 SMT5-14 Hi-Vi yellow Sleeve, 100 % TAEKI 5 fiber, 14 inches with thumb hole, cuts and heat protection. 454X 14 in.
60 pairs/box
14 Lbs
ten
18 SMT5-18 Hi-Vi yellow Sleeve, 100 % TAEKI 5 fiber, 18 inches with thumb hole, cuts and heat protection. 454X 18 in.
60 pairs/box
14 Lbs
ten
19 SMT5-22Hi-Vi yellow Sleeve, 100 % TAEKI 5 fiber, 22 inches
with thumb hole, cuts and heat protection. 454X 22"
50 pairs/box
23 Lbs
ten
20 SCT5Light weight Neck protection to weave grey-black 100 % TAEKI 5 fiber, one size, cuts and heat
protection. 454X -
60 pairs/box
12 Lbs
dozen
21 STT5 Light weight Apron to weave grey-black 100 % TAEKI 5 fiber, Men size, cuts and heat protection. 454X -
60 pairs/box
30 Lbs
dozen
Marque
NouveautéNew product
34 %
34 %
# Sku Specification EN 388 SizePackaging
Pairs/Box
Chemical resistant gloves and food handling gloves
1 GI-U-07C
Nitrile glove unlined.
Thickness +/- 0.21 mm. Total lenght 30 cm.
Dexterity and light weight
Food handling and processing
EN388-2001
EN374-JKL 7 8 9 10 11
120 pairs/box
11 lbs
dozen
2 GT-F-07C
Nitrile full dipped.
Thickness +/- 0.38 mm. Total lenght 33 cm.
Excellent abrasion resistant. Good grip in wet conditions.
Food handling and processing
EN388-4101
EN374-AJKL 7 8 9 10 11
120 pairs/box
20 lbs
dozen
3 MT-F-06C
Natural rubber full dipped.
Thickness +/- 0.70 mm. Total lenght 30 cm.
Good grip in oily conditions.
Food hanfling and processing
EN388-2121
EN374-AKL7 8 9 10 11
120 pairs/box
32 lbs
dozen
4 CB-F-06
A blend of chloroprene and natural rubber increasing the protection in chemicals.
Thickness +/- 0.60 mm. Total lenght 30 cm.
Provides a level of chemical resistance compared to conventional single
dipped gloves. Excellent abrasion resistant
EN388-4121
EN374-AKL7 8 9 10
120 pairs/box
29 lbs
dozen
5 BF6EB
Nitrile full dipped. 100% cotton Interlock liner.
Total lenght 30 cm.
High levels of wet, dry and oily grip.
Food handling and processing.
EN388-3111
EN374-JKLP. M. G. TG
72 pairs/box
18 Lbs
dozen
6 VF5EB
PVC full dipped seal with sleeve. Cotton Interlocked.
Total lenght 66 cm.
Oil and gaz handling.
Excellent abrasion and tear resistant
EN388-4121
EN374M. G. TG. TTG
72 pairs/box
55 Lbs
dozen
7 AK4BB
Chloroprene full dipped.
Toatl lenght 30/35 cm.
Heavy duty mechanical and chemical protection.
Excellent grip
EN388-3142
EN374-AKL7 8 9 10 11
72 pairs/box
33 Lbs
dozen
8 S018
PVC green full dipped. Double thickness.
Cotton jersey lined.
Rough finition palm. Lenght 35 cm (14'')
Supple, good grip and dexterity
4121 10
72 pairs/box
40 Lbs
dozen
9 S019
PVC and NBR full dipped.Triple thickness.
13 G seamless cotton
Rough finition palm. Lenght 30 cm (12'')
Extremely supple, good grip and dexterity
EN388-3232
EN374-AJKL 8 9 10 11
72 pairs/box
25 Lbs
dozen
10 S020Nitrile full dipped with ceramic particules at palm.
Green. Total lenght 30 cm (12'')
Waterproof, excellent grip and durable.4111 G.TG.TTG
144 pairs/box
32 lbs
dozen
11 S021Nitrile full dipped.
Combed cotton lining. Blue. Lenght 30 cm (12'').
Cool resistant (-30 DC), good grip and flexibility.3111 TTG
100 pairs/box
37 lbs
Ten
12 S022
PVC and NBR full dipped. Triple thickness.
Acrylic polar lining 10 g.
Lenght 30 cm (12'')
Cool resistant, extremely supple, durable and dexterity
EN388-3232 EN374-AJKL 8 9 10 11
72 pairs/box
42 Lbs
dozen
13 S2FLKW4Orange PVC fully dipped gloves, foam insulated liner, 4" knit wrist
Cold resistance (up to -30C)3111 10(XL)
120 pairs/box
59 lbs
dozen
Prices subject to sales policy 2016 of the BCL Glove LTD (revised June 2017)
Brand
New
New
New
New
New
New
The single glove doesn't exist, we advise you to choose the right work glove according to your needs !
New
11 %
5 %
12 %
Basic Fabrics
Heat and cut resistant fibers
Coatings
COTON
Fibre naturelle avec un bon pouvoir absorbant et un bon confort.
POLYÉTHYLÈNE HD
Fibre Haute densité. Bonne résistance à la coupure. Très confortable.
DYNEEMAFibre résistante à la coupure. Bonne résistance chimique et aux rayons UV.
COTTON
Natural fiber with good confort and absortion properties.
NYLON
Synthetic fiber made from polyamide. Abrasion resistant. Help to reduce hands fatigue. Gooddexterity and confort.
POLYESTER
Synthetic fiber. Resistant to abrasion and chemicals.
POLYAMIDESynthetic fiber who stand very well against abrasion.
PARA-ARAMIDSame as aramid, with higher resistant properties, in particular on tear and slice cut.
TAEKI5
High density polypropylene fiber. High performance German technology. Cut level 5.Thermal fiber. Resistant to heat, cold and UV radiations. Confortable. Lint free.Washable.
THERMOLITE
Light fiber. Confort and heat feeling. Humidity repellent. Very good cold resistant properties.
LEATHER
Animal related. Grain or split are the main use depending of the degree of thickness,suppleness and resistance desired. Leather : Cow, Goat, Deer, Bufffalo, Horse ...
POLYETHYLEN HD
High density fiber. Good cut protection.
DYNEEMA KEVLARHeat and cut resistant fiber. Weak density. Loose his properties in time.
CLEAN PU/PolyurethaneWater base. Breath and porus finish as leather would. Hypoallergenic and ecological.
PVC
Polyvinyl chloride. Resist well against abrasion. Acids and aqueus solutions protections.
NITRILEAbrasion, traction and poncture resistant. Good dexterity. Oil, petrolium and alcohol resistant.
CHLOROPRENE
Abrasion resistant. Absorb shocks. Souple. "The Croc sandals"
LATEX
Cut and puncture resistant. Good grip and liquid barrier.
GAGEIs the size of the mesh per inch. Highest is the digit, finer is the filament. Giving dexterity properties.
NBR
NITRILE, LATEX, PVC : 3 layers for better protection chemicals. NBR is resistant to oils and fats while maintaining its mechanical properties.
HEADQARTERS - PLANT21, rue du Parc-Industriel Saint-Pacôme, Québec, G0Phone number : 418.852.2098 Fax number : 418-852-3330
www.akka.ca