The TitanEA Strong Motion Accelerograph is ideal for Building Owners & Operators who are required to perform seismic monitoring of multi-story buildings. Used by USGS & deployed around the world, this system is considered the gold standard in seismic technology.

The new TitanEA is a cost effective solution, as it does not need expensive & cumbersome analogue cables, central recorders, computers or numerous GPS antennas.

The TitanEA: • Requires no central computer• Uses inexpensive CAT5 cables to network multiple instruments• Is easy to deploy• Uses browser-based remote access to instruments

Strong Motion Building Monitoring Kit #17452

With no single point of failure, the TitanEA Strong Motion Accelerograph is ideal for networked deployments in civil structures that must install three accelerographs to meet building code requirements.

The TitanEA facilitates central control room monitoring of a structure, allowing operators to monitor the activity of all sensors in the network in real-time.

Each class ‘A’ sensor in the network is accessed independently using any mobile device with internet access, such as a smart phone. Bu i l d i n g Owner s & Structural Engineers can view instrument status and events anywhere, anytime.

Structural Engineers are able to make quick & accurate post-event decisions regarding safe re-entry, as well as determine if any structural damage was incurred.

Web based GUI Interface

�

#1002.08.01

For more information & technical specifications:www.nanometrics.ca/products/titan

1. TitanEA Timing Master

3. TitanEA Timing Slave

2. TitanEA Timing Slave

Building owners & operators will appreciate the ease of use provided by the web based interface & simplified GUI. Recorded data is readily available online. An events page provides instant access to recorded events of each instrument on the network or within a structure.

Strong Motion Building Monitoring Kit #17452

CA

T5

Po

E C

ab

le

The TitanEA Building Monitoring Kit fulfills the requirements of the 2012 International Building Code.

Building Monitoring Kit #17452:

3 Strong Motion Accelerographs: Place on structure 1) Near the top, 2) mid-height, 3) at lowest level.

3 CAT5 Ethernet Cables (3 m)

1 PoE Switch: Stand alone network

1 Battery (60 Ah) & Charger: Battery back-up power for 2 days.

The TitanEA utilizes PTP Timing and common CAT5 Ethernet cabling found in any structure to minimize instal lat ion costs and provide complete freedom of instrument placement.

Toll Free: 1-855-792-6776 (N. America)