nisshin metal and recommendation of metal

1 Nisshin Steel Quality Products1 Nisshin Steel Quality Products

Foreword 2

Features 3

Production Process 4

Characteristics and Applications 5

Types of Stainless Steel Available 11

Available Sizes (SUS 304 and SUS 430) 13

Finish 15

Surface-Treated Stainless Steel 16

Dimensional Tolerances 17

Applications 20

Types of Protective Coatings 25

Packaging 25

Coil Unit Weight Diagram 26

Information Needed to Meet Orders 26

Contents

2Nisshin Steel Quality Products

Shunan Works

Nisshin Steel Co.,Ltd is an integrated steel manufacturer in Japan. Our products range

from ordinary steel to special steel, surface-treated products, stainless steel and welded

pipes and tubes. In 1958, we became the first Japanese producer of cold-rolled stainless

steel sheets in coil at Shunan Works and since then we have helped to make stainless

steel a material commonly used in the manufacturing of consumer durables both in Japan

and overseas.

Nisshin Steel has received wide acclaim as a supplier of cold-rolled sheets and strips and

hot bands of excellent quality. To meet the diversifying needs of our customers, we have

developed special types and grades of steel, including surface-treated products.

We are working to satisfy our customer's needs by providing a line of better products and

the quality of which is achieved through our use of advanced production facilities.

The following is an introduction to our stainless steel products, their applications and

other relevant information.

Foreword

3 Nisshin Steel Quality Products

Features

1

Nisshin products are manufactured by an integrated quality control process from melting to finishing.

Uniform Quality

2

The state-of-the-art production facilities offer high sheet thickness precision and flatness.

High Dimensional Precision and Flatness

3

Nisshin produces a wide variety of unique NSS type steel in addition to the JIS standard steels to meet anyneeds of customers.Nisshin products are given various types of surface finish.

Wide Variety of Types of Steel and Finish

4

Nisshin products widely ranges in thickness, length and width.

Wide Range of Sizes

5

Nisshin can give technical services suitable for user's needs,making full use of our rich experience in the field of steel production.

Perfect After-Sales Service System

Converter Tandem Sendzimir cold rolling millHot strip mill (Kure Works)Continuous casting machine


Production Process

Cr-ore, coke, Scrap, and ferro-alloy

Hot strip mill

Cold-rolled strip (sheets)

Cold-rolled strip (coils)

Cold-rolled strip (coils)

Continuous annealing and pickling line

Continuous bright annealing line

Continuous annealing and pickling line

Coil grinding line

Ferritic type, martensitic type

Ferritic (single-phase), Austenitic type

Tandem Sendzimir mill

Sendzimir mill

Cluster mill

Bell type annealing furnace

Electric arc furnace L.D.converter Vacuum degassing vessel Continuous casting machine

Slab grinder Slab heating furnace

Skinpass mill

BA finish No.2B finish

No.2D finish

Continuous shearing line

Coils

Slitting line

Tension leveling line

Finish polisher

Polished finish

Cold rolling process

Final process

Hot rolling process

Steel making process

High crown controlled hot strip millTandem Sendzimir cold rolling millCold rolling by automatic gage controllerTension levelling line for strips and sheetsElectronic automatic surface inspector

Strong points of manufacturing facility

6Nisshin Steel Quality Products5 Nisshin Steel Quality Products

Characteristics and Applications

1. Characteristics and Applications


Classification

Chemical Composition Physical properties Mechanical properties

NisshinNSS

C Ni Cr Mo OthersSpecificgravityg/cm3

Modulus ofelasticity103N/mm2

Averagemodulus ofthermalexpansion

10-6cm/cm/20100

ThermalconductivityW/m100

Tensile test Hardness test

YieldstrengthN/mm2

TensilestrengthN/mm2

Elongation

HB HRB HV

Austenitic type

0.03 6.00 8.00 16.0018.00 N0.20 7.93 194 16.9 16.3 210 530 40 95 2180.15 6.00 8.00 16.0018.00 7.93 194 16.9 16.3 205 520 40 187 95 2180.08 8.0010.50 18.0020.00 7.93 194 17.3 16.3 205 520 40 187 90 200

304S 0.08 8.0010.50 18.0020.00 7.93 194 17.3 16.3 205 520 40 187 90 200304ES 0.03 7.00 9.00 16.0018.00 Cu2.803.80 7.93 199 17.2 15.1 155 450 40 162 90 170

0.08 8.5010.50 17.0019.00 Cu3.004.00 7.93 194 17.3 16.7 155 450 40 187 90 200XM7 0.05 8.5010.00 18.0020.00 Cu2.504.00 7.93 194 17.3 16.7 205 510 40 90 200304M2 0.03 6.50 8.50 15.5017.50 Cu1.502.50 7.93 187 17.3 16.3 335 660 50 86 175304M3 0.06 6.40 8.00 15.0017.00 Cu1.502.50 7.93 187 17.3 16.3 180 500 40 187 90 200

0.03 9.0013.00 18.0020.00 7.93 194 17.3 16.3 175 480 40 187 90 2000.08 7.0010.50 18.0020.00 N0.100.25 7.93 194 16.9 16.3 275 550 35 95 2200.12 10.5013.00 17.0019.00 7.93 197 17.3 16.3 175 480 40 90 200

305M1 0.08 11.0013.00 15.0017.00 Mn2.004.00 7.93 194 17.3 16.3 175 480 40 90 200302B 0.15 8.0010.00 17.0019.00 Si2.003.00 7.93 194 16.2 15.8 205 520 40 95 220ER-1 0.07 12.0013.50 18.5020.00 Nb0.050.20 Si3.004.00 7.75 182 15.5 14.6 255 520 45 95 220ER-4 0.07 12.0013.50 16.0018.00 2.003.00 Si2.003.00 7.85 182 14.5 205 520 40 95 220

0.08 19.0022.00 24.0026.00 7.98 205 14.4 14.1 205 520 40 187 90 2000.08 10.0014.00 16.0018.00 2.003.00 7.98 194 16.0 16.0 205 520 40 187 90 2000.03 12.0015.00 16.0018.00 2.003.00 7.98 193 16.0 16.0 175 480 40 187 90 200

SCR 0.07 11.5013.50 18.0019.50 0.501.50 Cu1.502.50 Si2.504.00 7.75 194 16.7 16.0 255 520 45 95 220AM-3 0.08 8.5010.00 18.0020.00 Cu3.604.50 7.93 193 16.5 205 510 35 200

Type

JISSUS

301304

XM7

304L304N1305

302BXM15J1

310S316316L

315J2

301L






Classification

Chemical Composition Physical properties Mechanical properties

NisshinNSS

C Ni Cr Mo OthersSpecificgravityg/cm3

Modulus ofelasticity103N/mm2

Averagemodulus ofthermalexpansion

10-6cm/cm/20100

ThermalconductivityW/m100

Tensile test Hardness test

YieldstrengthN/mm2

TensilestrengthN/mm2

Elongation

HB HRB HV

Ferritic type

0.08 10.5011.75 Ti6C0.75 7.75 194 10.8 23.8 175 300 22 167 86 175

445M2 0.02 0.60 21.0023.00 1.001.50 N0.020 Ti0.050.50 Nb0.100.60 7.75 199 10.0 22.5 205 450 22 95 220410M1 0.03 0.60 11.5013.50 7.75 202 9.9 23.8 195 360 25 85 170HR-1 0.03 0.60 13.5515.50 Si0.701.50 Nb0.200.80 7.75 211 11 21.9 195 360 22 96 230NCA-1 0.03 0.60 17.0019.00 Al2.004.00 Ti0.50 7.35 201 10.0 18.8 490 20 95 220NCA-2 0.05 0.60 11.5013.50 Al0.502.00 Si1.002.00 Ti0.30 7.65 201 10.0 23.8 490 20 95 220

0.15 0.60 11.5013.00 7.75 202 9.9 23.8 205 440 20 200 93 2100.15 0.60 11.5013.50 7.75 202 9.9 23.8 205 440 20 200 93 2100.08 0.60 11.5013.50 7.75 202 9.9 23.8 205 410 20 183 88 200

410M4 0.040.10 0.60 11.5013.50 Si0.100.40 Mn0.501.00 7.75 202 9.9 23.8 205 410 20 88 200410M5 0.030.06 0.60 11.5012.10 0.50 Cu0.700.90 7.75 203 10.1 24.3 205 410 20 88 200

0.160.25 0.60 12.0014.00 7.75 202 10.3 23.8 225 520 18 223 97 2340.260.40 0.60 12.0014.00 7.75 202 10.3 23.8 225 540 18 235 99 247

WR-1 0.200.40 0.50 12.0014.00 Nb0.300.50 7.70 201 10.3 24.9 225 540 18 247HT980 0.030.06 3.005.00 12.0014.00 Ti0.150.50 7.75 203 10.8 20.5 735 880 3 290HT1770 0.09 6.507.75 13.5015.50 Si1.002.00 Cu0.401.00 Ti0.200.65 7.75 207 10.9 24.9 10001200 11001800 3 300500HT1770M 0.09 6.507.75 13.0014.50 0.701.20 Si1.002.00 Cu0.401.00 Ti0.200.65 7.75 207 10.9 24.9 10001200 11001800 3 300500HT2000 0.050.10 7.808.80 13.0014.00 1.802.70 Si2.203.20 7.80 200 14.0 20.8 16002200 17002300 1 500650431DP2 0.08 1.003.00 16.0018.00 7.73 201 10.5 19.9 7501200 10501300 6 340400

Type

JISSUS

445J1410L

403410410S

420J1420J2

632J1

SUH409409M1 0.03 0.50 10.5012.00 Ti5CN0.75 7.75 202 9.9 23.8 195 360 25 85 170409M1S 0.03 0.50 10.5012.50 Si0.30 Ti5CN0.75 7.75 202 9.9 23.8 175 360 25 79 150

405 0.08 0.60 11.5014.50 Al0.100.30 7.75 202 10.8 23.8 175 410 20 183 88 200430 0.12 0.60 16.0018.00 7.70 201 10.4 26.2 205 450 22 183 88 200430LX 430M2 0.05 0.60 16.0018.00 Ti5CN1.00 7.70 197 10.4 26.2 175 360 28 170430LX 430M4 0.03 0.60 16.0018.00 Nb0.200.65 7.70 201 10.4 26.0 205 450 22 88 200

430M3 0.04 0.60 16.0018.00 0.200.50 Ti10C1.0 7.70 202 10.4 26.0 205 450 22 88 200436L 436 0.025 0.60 17.0019.00 0.501.50 N0.025 Ti8CN0.80 7.70 202 10.4 26.2 205 450 22 183 88 200436J1L 0.025 0.60 17.0020.00 0.400.80 N0.025 Nb8CN0.80 7.70 245 410 20 90 200436J1L 432 0.025 0.60 17.0019.00 0.450.65 N0.020 Nb8CN0.80 7.70 205 390 25 170430J1L 442M3 0.03 0.60 18.0020.00 Cu0.300.80 Nb7CN0.150.80 7.70 201 10.4 26.2 205 450 22 88 200430J1L 442M3S 0.03 0.60 18.0020.00 Si0.50 Cu0.300.80 Nb7CN0.80 7.75 201 10.4 26.2 245 410 22 88 200444 444N 0.02 0.60 17.5020.00 1.752.50 N0.02 Nb10CN0.80 7.75 199 10.0 22.5 205 450 22 220

EM-2 0.02 0.60 17.5020.00 1.752.50 Mn0.701.50 Cu0.100.30 7.75 206 9.9 21.9 205 450 22 220

Martensitictype

High tensiletype

(including precipitationhardening type)

Dual-phase type




ClassificationType

Characteristics ApplicationsJISSUS

NisshinNSS

Austenitic type

301L High strength can be obtained by skinpass. Highly resistant tointergranular corrosion. Railway rolling stock

301 High strength can be obtained by skinpass. Steel belts, metal gasket, springs304 Typical austenitic stainless steel. Sundries, kitchen utensils, LNG tanks, others

304S Soft and amenable to deep drawing. Sundries304ES Amenable to deep drawing, cold forging and shape freezing, etc. Deep drawing sensor case, flange

XM7 Cold working increased by adding copper to type 304. Sundries, Used for cold headingXM7 Cold working increased by adding copper to type 304. Sundries, Used for cold heading304M2 Amenable to deep drawing and stretch forming. Sundries, door knobs, sink bowls304M3 Amenable to high speed bulging expanding. Gas burner parts

304L Lower carbon content than type 304, high resistance tointergranular corrosion. Oil refinery and papermaking equipment

304N1Strength increased by adding nitrogen to type 304 whilekeeping its ductility.

High strength material for construction,colored fume pipe

305 Less work hardenability than type 304. Used for spinning, cold heading

305M3 High spring characteristics and high strength with no magnetism. Magnetic head cover

302B 302B More oxidation resistant than type 302, equal in oxidationresistance and strength with type 310S under 900C. Automotive exhaust gas purifiers

XM15J1 ER-1 Equal in oxidation resistance with type 309S (high qualityoxidation resistant steel).Automotive exhaust gas purifiers, materialfor burning part

ER-4High temperature salt corrosion resistance and chloridemolten salt corrosion resistance.

Automotive flexible tube, incinerator

310S High quality oxidation resistant steel. Nitric acid tanks and burning chamber parts

316 Highly corrosion resistant. Slightly magnetized after forming. Chemical and paper industry equipmentand VTR guide rollers

316L Lower carbon content than type 316, highly resistant tointergranular corrosion.Chemical, paper, dye and fertilizer industryequipment

315J2 SCRResistant to stress corrosion cracking and has equal crevicecorrosion resistance with type 316.

Boilers and electric water heaters, indoorplumbing

305M1 Extreme deep drawing is possible. Slightly magnetized after forming. TV electron guns and electronic parts




ClassificationType

Characteristics ApplicationsJISSUS

NisshinNSS

Ferritic type

SUH409 Oxidation resistant steel developed by adding titanium to 11Cr type. Automotive parts and exhaust gas purifiers

445J1 Corrosion resistance increased by adding chromium to type 436L. Electronic portable water heater, roofing material445J1 445M2 High corrosion and weather resistance Building materials410L 410M1 Developed by reducing carbon content in type 410. Highly workable. Automotive exhaust gas purifiers and exhaust pipes

HR-1 High heat resistant 14Cr-Si-Mn-Nb Steel with high temperature strength and oxidation resistance. Automotive exhaust pipesNCA-1 18Cr-Al Steel with high oxidation resistance. Oilstove burning columns which must heat redNCA-2 13Cr-Si-Al Steel exhibiting high oxidation resistance. Oilstove burning columns

403 Developed by reducing silicon content in type 410. Valve sheets410 Typical 13Cr stainless steel. Low quenching hardenability. Turbine blades, spoons, forks410S Developed by reducing carbon content in type 410 to below 0.08%. High workability. Sundries and distillation column trays

410M4 Designed so that maximum Rockwell hardness of about 35 canbe obtained only by hardening in wide temperature range. Disk brakes

410M5 Shape stability after quench hardening increased by adding copper. Disk brakes420J1 High quenching hardenability and work hardenability. Machine parts, table-knives420J2 High quenching hardenability and work hardenability. Table-knives, slide calipers, rulers, scissors

WR-1Strong resistance can be obtained against abrasive polishingby hard grain.

Loom parts

HT980 High strength can be obtained by quench hardening at 750 or higher temperatures. Steel belts and high tension materials for welding

632J1 HT1770 Workable at low hardnesses because of high hardenabilityobtainable with age-hardening. High workability and long mold life. Seat sensor parts, punched springs

HT1770M High toughness, high strength and high fatigue strength can be obtained by adding molybdenum. Steel belts, golf club headHT2000 High strength with ductility, toughness and fatigue strength. ID saw blades, flapper valve

431DP2Spring characteristics can be obtained by a short-time age-hardening.

Automotive parts, wrapping carrier, pressplate

409M1 Type 409 modified by increasing workability, oxidation resistance and high frequency weldability. Automotive exhaust pipes409M1S Formability increased by reducing silicon content in type 409M1. Automotive exhaust pipes

405 Weldability and workability increased by adding aluminum to type 410. Oil refining distillation column trays430 Typical ferritic stainless steel. Kitchen utensils, sundries, stove reflectors

430LX 430M2 Developed by adding titanium to type 430. Has higherworkability, weldability and corrosion resistance than type 430.Sink bowls, burners, bicycle rims and bathheater external plates

430LX 430M4 Developed by adding niobium to type 430 for increased workability and weldability. Bicycle rims and automotive parts such as wheel covers430M3 Developed by adding molybdenum and titanium to type 430. High workability, weldability and corrosion resistance. Boilers

436L 436 More corrosion resistant than type 432 under the circumstance of dew condensation of exhaust gas. Material for automotive muffler434 Developed by adding molybdenum to type 430. More corrosion resistant than type 430. Automotive trimmings436J1L Developed by adding molybdenum and niobium to type 430, and highly reducing the carbon content and nitrogen content. Boilers, material for building interior and exterior

436J1L 432Corrosion resistant under the circumstance of dew condensationof exhaust gas and has better salt corrosion resistance.

Material for automotive muffler

442M3 Developed by adding copper and niobium to type 430. More corrosion resistant than type 434. Automotive trimmings, Automotive exhaust pipes442M3S Formability increased by reducing silicon content in type 442M3. Automotive exhaust pipes

444 444N Free from stress corrosion cracking. Equal in corrosion resistance to type 316. Water reservoirs, heat reservoirs, solar heater collectorsEM-2 18Cr-2Mo-Mn-Nb Steel with high temperature strength and scale detachment resistance. Automotive exhaust pipes

Martensitictype

High tensiletype

(including precipitationhardening type)

Dual phasetype


NoteValues adjacent to symbols and are chemical composition standard percentage.Values adjacent to symbol = are chemical composition representative percentage.

Increase in carbon contentIncrease in carbon content Addition of niobium

Addition of copper

(Increased high temperature oxidation resistance)

Extremely low carbon content

(Increased weldability and workability)

(Increased weather resistance and intergranular corrosion resistance)

(Increased weldability and intergranular corrossion resistance)

(Softening, increased weldability)

Addition of aluminum

Low carbon content,addition of silicon and aluminum

Addition of titanium

(Workability, corrosion resistance and weldability)

Extremely low carbon content, addition of molybdenum and titanium

(Increased pitting corrosion resistance and intergranular corrosion resistance)

(Non-hardening, increased weldability)

(Quench hardening stability at low hardness)

Reduction in silicon content

Reduction in carbon content and manganese content

Reduction in carbon contentExtremely low carbon content

Low carbon content,addition of titanium

Low carbon content, addition of niobium

Saving molybdenum, low carbon content, addition of copper and niobium

Extremely low carbon content,addition of titanium

(Increased formability and weldability)

Addition of niobium, reduction in molybdenum content

(Increased formability and weldability)

Addition of molybdenum

Addition of manganese

(Increased high heat resistance and scale detachment resistance)

(Increased age-hardenability and Introduction of spring characteristics)

(Increased corrosion resistance)

(Increased formability)

Addition of nickel and titaniumReduction in carbon and nitrogen content

(High strength and high toughness after welding)

Addition of silicon and copper

(Introduction of precipitation hardenability)

(Increased hardenability and wear resistance)

(Increased corrosion resistance and formability)

Extremely low carbon and nitrogen content, increase in molybdenum content, addition of niobium

Extremely low carbon and nitrogen content, increase in chromium content, addition of molybdenum, niobium and titanium

(Increased corrosion resistance, weldability, and intergranular corrosion resistance)

(Increased corrosion resistance, weldability and intergranular corrosion resistance)

Extremely low carbon content, addition of aluminum

(Increased high temperature oxidation resistance)

SUS410

SUS 420J 1

C=0.160.25

SUS 403

Si0.50

SUS 410S

C0.08

NSS HT 1770

15Cr-7Ni-0.7Cu-0.4Ti

NSS HT 980

12.5Cr - 4Ni-Ti

NSS 430M2

C=0.03 Ti = 7CN

NSS 430M3

C=0.01 Mo=0.4 Ti=0.55

NSS 444N

C, N0.02 Mo=2.0 Nb=0.4

NSS 442M3

19Cr-0.5Cu-0.5Nb

NSS 436

18Cr-1Mo-0.5Ti

NSS 432

18Cr-0.5Mo-0.4Nb

NSS 445M2

22Cr-1.2Mo-Nb-Ti

NSS 430M4

C = 0.03 Nb = 0.200.65

SUS 434

Mo=1.0

SUS 420J2

C=0.260.40

NSS WR-1

C=0.25 Nb=0.36

NSS 410M5

C=0.05 Mn=0.7 Cu=0.8

NSS 410M4

C=0.07 Mn=0.7

NSS 410M1

C0.03

SUS 405

Al=0.2

SUH 409

Ti6C

NCA-2

C0.05 Si=1.5 Al=1.0

NSS HR-1

14Cr-1Si - 1Mn-0.4Nb

NSS 409M1

C0.03 Ti5CN

NSS 431DP - 2

C0.08 17Cr Ni2.0

NSS EM - 2

Mn=1.0 Mo=2.0 Nb=0.4

NCA - 1

C0.03 18Cr-3Al-Ti

Base type of 13Cr steel

C0.15

SUS430

Base type of 18Cr steel

C0.12

(High heat resistance)

Addition of silicon, manganese and niobium

Types of Stainless Steel Available

1. JIS series and NSS series (Nisshin Steel)


Types of Stainless Steel Available

Reduction in chromium and nickel contents

Reduction in carbon content,Addition of nitrogen

Addition of silicon,molybdenum and copper

(Increased stress corrosion cracking resistance)

Addition of silicon, copper and molybdenum

Addition of molybdenum and copper


Increase in silicon content

Increase in chromium and nickel contents

(Increased corrosion resistance and high temperature oxidation resistance)

(Increased heat resistance and high temperature oxidation resistance)

Increase in silicon content,addition of niobium

(Increased heat resistance)


(Increased high temperature salt corrosion resistance)

(Increased acid resistance and pitting corrosion resistance)


(Increased intergranular corrosion resistance)

Increase in nickel content

(Work hardenability)

Increase in manganese content

(Removal of magnetism)

Increase in nitrogen content

(Increased strength, introduction of spring characteristics)

Addition of copper

(Low magnetism)


(Increased intergranular corrosion resistance)

Addition of manganese and copper

(Softening)

(Increased age-hardenability and corrosion resistance)

Addition of silicon and copper

(Increased workability and season cracking resistance)

Addition of manganese and copper

(Highly softening)

(Introduction of work hardenability, increased strength)

SUS304

SUS 301

17Cr-7Ni

SUS 316

18Cr-12Ni-2Mo

NSS SCR

19Cr-12Ni-3Si-2Cu-0.8Mo

SUS 316L

C0.030

NSS 305M3

19Cr-12Ni-3Mn-0.15N

SUS305

18Cr-12Ni

NSS 304M2

16Cr-7Ni-1.5Si-1.8Mn-2Cu

NSS 304ES

17Cr-8Ni-1.6Mn-3Cu

SUS 304L

C0.030

NSS 302B

18Cr-9Ni-2.5Si

NSS ER - 1

19Cr-13Ni-3Si-0.1Nb

SUS 310S

25Cr-20Ni

SUS 301L

C0.030 N=0.09

NSS HT2000

14Cr-8Ni-2Mo-3Si

NSS ER - 4

17Cr-13Ni-2.5Si-2.5Mo

NSS 304S

19Cr-9Ni-1.5Mn-1Cu

NSS XM7

18Cr-9Ni-1.6Mn-3Cu

Base type of 18Cr-8Ni steel

C0.08

NSS 305M1

16Cr-12Ni-3Mn

NoteValues adjacent to symbols and are chemical composition standard percentage.Values adjacent to symbol = are chemical composition representative percentage.

2. JIS series and NSS series (Nisshin Steel)


Available Sizes

Products of sizes other than shown below will be made to order.1Hot-rolled productsbands SUS 304 / No.1ThicknessWidth

SUS 304 and SUS 430(Hot-rolled products)

Thickness(mm)

Wid

th(m

m)

1,250

1,000

200

9.02.5 3.3 3.83.0

300

660

Contact your nearest Nisshin dealer before placing an order...

2Hot-rolled productsbands SUS 430/ No.1ThicknessWidth

Thickness(mm)W

idth

(mm

)

1,250

1,000

200300

9.02.5 3.0 3.53.3 3.8

660


4Hot-rolled productsplates SUS 430/ No.1ThicknessWidth

Thickness(mm)

Wid

th(m

m)

1,250

1,000

200

9.03.02.5

3Hot-rolled productsplates SUS 304 /No.1ThicknessWidth

Thickness(mm)

Wid

th(m

m)

1,250

1,000

200

9.03.02.02.49


5Hot-rolled productsplates SUS 304, SUS430/ No.1ThicknessLength

Len

gth

(m)

8

6

4

2.0 5.5 9.0Thickness(mm)


Available Sizes

Products of sizes other than shown below will be made to order.1Cold-rolled productsstrips SUS 304/2B, 2DThicknessWidth

SUS 304 and SUS 430 (Cold-rolled products)

502010

200

1,000

914

660

1,250

100

0.2 2.52.049 3.2 5.04.0 6.00.3


Thickness(mm)

Wid

th(m

m)

2Cold-rolled productsstrips SUS 430/ 2B, 2DThicknessWidth

1,250

1,000

1050

660

914

5.04.03.22.52.0490.30.2

20


Thickness(mm)W

idth

(mm

)

4Cold-rolled productssheets SUS 430/ 2B, 2DThicknessWidth

1,250

1,000

100200

600

5.03.02.50.30.2 2.049


Thickness(mm)

Wid

th(m

m)

3Cold-rolled productssheets SUS 304/2B, 2DThicknessWidth

100

600

1,000

1,250

200

0.2 0.3 2.049 2.5 3.0 6.0

Thickness(mm)

Wid

th(m

m)


5Cold-rolled productssheets SUS 304, SUS430/2B, 2DThicknessLength

0.2

1.5

2.0

3.05

4

6

8

3.3

0.2

Width200mm

Width200mm

0.2 0.3 0.5 0.8 2.049 2.5 3.0 6.0 0.3 2.049


Len

gth

(m)

Thickness(mm)


1. Hot-rolled products and Cold-rolled products

Finish

Classification JIS Nisshin Finish

Hot-rolledproducts

No.1 Heat-treated and pickled after hot rolling.CG Given No.1 finish and polished with any of endless belts specified in JIS R6001, but not degreased.

Cold-rolledproducts

No.2D Heat-treated and pickled after cold rolling.No.2DR Heat-treated, pickled and lightly cold-rolled by dull rolls after cold rolling.

No.2B Heat-treated, pickled and lightly cold-rolled to obtain appropriate luster surface after cold rolling.No.3 Polished with endless belt of No.100 to 120 specified in JIS R6001.No.4 Polished with endless belt of No.150 to 180 specified in JIS R6001.#320 Polished with endless belt of No.320 specified in JIS R6001.#400 Polished with endless belt of No.400 specified in JIS R6001.

No.9 Polished with endless belt numbered over 320.BA Given high-luster finish and subjected to bright heat treatment after cold rolling.HL Polished with abrasives No.80 to 150 specified in JIS R6001 to obtain continuous streaks.

No.7 Buffed so that reflectivity is higher, compared to #400 finish.No.8 Given BA finish and polished with cotton buff to obtain high reflectivity.Emboss Provided with irregularities on one side by cold rolling (both sides can be embossed).

Note: Please refer to the sample books for the standard surface finish.

2. Examples of surface finish

SUS 304, No.2D SUS 304, No.2B SUS 430, No.2B

SUS 304, BA SUS 430, BA SUS 304, No.8

SUS 304, No.4 SUS 304, HL Emboss


Surface-Treated Stainless Steel

1. Surface-Treated Stainless Steel Products

Classification Nisshin Finish

Paint-coatedproducts

Transparent-Paint Stainless Steel Transparent film is colored by baking.Pearl-Toned Transparent-Paint Stainless Steel Transparent film with special pigment is colored by baking.

W-coated Stainless Steel Lubricating film is colored by baking.Colorsoftain Weather resistant paint is colored by baking.

Metal-coatedproducts

Coppersoftain Electrically coated with copper.Alstar Stainless Steel Coated with melted alminum.Tough-Tain Z Coated with melted zinc and subjected to dark gray aspect treatment.

Note: Please refer to the sample books for the standard surface finish.

Colorsoftain Tough-Tain Z

Pearl-Toned Transparent-Paint Stainless Steel Coppersoftain

ThicknessUp to 1000 1000 and over, up to 1250 1250 and over, up to 1600

2.50 and over, up to 3.15 0.30 0.35 0.403.15 and over, up to 4.00 0.35 0.40 0.454.00 and over, up to 5.00 0.40 0.45 0.505.00 and over, up to 6.00 0.50 0.55 0.606.00 and over, up to 8.00 0.60 0.65 0.708.00 and over, up to and incl. 9.00 0.65 0.65 0.65


Hot-rolled productsJIS G 4304

Dimensional Tolerances

1ThicknessWidth

Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000

2Widthcut edge, machine cutting

Length

Plates

ThicknessUp to 100 630 and over,up to 1000 1000 and over

Width

Bands

6.0 and over, up to and incl. 9.0 100100

150

Up to 9.0 50150

200

Thickness

Unitmm

Length Maximum degree of flatness Maximum degree of flatnesssymbol : EF

Up to and incl. 1000Up to and incl. 2000 15 3Over 2000 20 6

Over 1000, up to and incl. 1580Up to and incl. 2000 20 6Over 2000 20 6

4Degree of flatnessWidth

Unitmm

Unitmm

Unitmm

100 and over,up to 160




100

100

100

100

Up to 6.0 5050

50

50

100

100

100

Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000Length

3Plate lengthmachine cutting

Up to and incl. 9.0 100150

300

Thickness

Unitmm



ThicknessThickness tolerances

0.35 0.405.00 and over, up to 6.00 0.40 0.45

0.50 0.50

Cold-rolled productsJIS G 4305

WidthUnitmm

Up to 1250 1250 and over, up to 16000.30 and over, up to 0.60 0.05 0.080.60 and over, up to 0.80 0.07 0.090.80 and over, up to 1.00 0.09 0.101.00 and over, up to 1.25 0.10 0.121.25 and over, up to 1.60 0.12 0.151.60 and over, up to 2.00 0.15 0.172.00 and over, up to 2.50 0.17 0.202.50 and over, up to 3.15 0.22 0.253.15 and over, up to 4.00 0.25 0.304.00 and over, up to 5.00

6.00

Thickness

Thickness tolerances

0.10 0.112.50 and over, up to 3.15 0.11 0.12

0.12 0.13

JIS ET

WidthUnitmm



0.16 and over, up to 0.25 0.25 and over, up to 0.40 0.038 0.0380.40 and over, up to 0.60 0.040 0.0400.60 and over, up to 0.80 0.05 0.050.80 and over, up to 1.00 0.05 0.061.00 and over, up to 1.25 0.06 0.071.25 and over, up to 1.60 0.07 0.081.60 and over, up to 2.00 0.09 0.102.00 and over, up to 2.50

3.15 and over, up to 4.00

Up to 160 160 and over,up to 250250 and over,up to 400


0.020 0.025 0.030 0.0300.025 0.030 0.035 0.0350.035 0.040 0.040 0.0400.040 0.045 0.045 0.0450.040 0.05 0.05 0.050.05 0.05 0.05 0.060.05 0.06 0.06 0.060.06 0.07 0.08 0.080.07 0.08 0.08 0.090.08 0.09 0.09 0.100.09 0.10 0.10 0.11

1Thickness

JIS



ThicknessWidth tolerances

Up to 0.6 0.15 0.30 0.500.60 and over, up to 1.00 0.20 0.30 0.501.00 and over, up to 1.60 0.20 0.40 0.601.60 and over, up to 2.50 0.25 0.50 0.702.50 and over, up to 4.00 0.30 0.50 0.80

Sheets and stripsEW

WidthUnitmm

Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000

2Widthcut edge

Length

Sheets

Strips


200

Thickness

Unitmm

Unitmm

Up to and incl. 1524 Over 1524Width


Thickness

Up to 160 160 and over, up to 250 250 and over, up to 400 400 and over, up to 630 630 and over, up to 10000.20 0.250.25 0.250.30 0.300.35 0.350.40 0.40

Up to and incl. 3500 Over 3500, up to and incl. 6000 Over 6000Length

3Sheet length


300

Thickness

Unitmm

Length Maximum degree of flatness Maximum degree of flatnesssymbol : EF

Up to and incl. 1000Up to and incl. 2000 15 3Over 2000 20 6

Over 1000Up to and incl. 2000 20 6Over 2000

For specifications for edge waves and center buckles, please consult beforehand.

20 6

4Degree of flatnessWidth

Unitmm


Applications

System kitchen (SUS 304 AND 430)

Knives (SUS 420J2)

Kitchen utensils (SUS 304) Washing machine basket (NSS 442M3)

Composite post (Transparent-Paint/SUS304)Hot water reservoir (NSS444N)Oil burning boiler(NSSSCR)

Golf club head face (NSSHT1770M)

Automotive special washer (NSS431DP-2)


Applications

Railway rolling stock (SUS 301L)

Automotive exhaust manifold (NSSHR-1)Motorcycle disk brake (NSS 410M4)

Super deep drawing sensor case (NSS304ES) Super deep drawing parts (NSS304ES)


Applications

Water tank (NSS 444N)

Building exterior wall, embossed stainless steel"STARLIGHT" (SUS 304)

and perforated stainless steel (SUS 304)

Surface of embossed stainless steel"STARLIGHT"


Applications

SEIBU DOME STADIUM (NSS445M2)

SAITAMA STADIUM (NSS445M2) SAITAMA SUPER ARENA (NSS445M2)


Applications (Steel Forming technology Institute "Annex")

The Annex building is the Japans first full-scale two-story structure designed and constructed according to the "Standards" forStainless Steel Structure Design and Construction (Draft). "Only esthetic stainless steel sheet developed by Nisshin have beenextensively used as internal and external walls and roofs as well as columns and beams.

Exterior panels (embossed stainlesssteel "STARLIGHT", Fine Color Black)

Frontal view

Entrance hall

1st story column (Rectangularpipe, mirror finish)

1st and 2nd story column (Rectangularpipe, hair line finish) 1st story beam(Rectangular pipe, hair line finish)

Ceiling (Mirror finish, Fine Crystal Class1)

Stainless steel system trusses (Neues Bronze)

Ceiling panels (Perforated stainlesssteel, bead shot finish)

Eaves column (Round pipe, mirror finish)

Eaves column (Rectangular pipe, mirrorfinish)

Interior panels (STARLIGHT)

Interior panels (Hair line finish, Neues Black)

Interior panels (Pattern:etched, finish:fine satin)

Blind(perforated stainless steel, laminated glass)


Types of Protective Coatings

Packaging

Characteristics of protective coatings vary with storage and use environments. So the protective coated products should bestored in places well ventilated and protected from direct sunlight at temperatures lower than 30C. Please use products withprotective coating SPV 224 within one year of delivery and products with other coatings within three months of delivery.

Products other than shown above are available to order.

Thicknessm

Characteristics Uses

SPV 205 130 Little adhesive remains. Apt for simple bend forming,but not for deep drawing and roll forming. Building material

80 Exhibits high weatherability. Apt for drawing and rollforming when sheet thickness is 1.0mm or less. Kitchens

SPV 363 60Apt for light forming such as bending when sheetthickness is 1.0 mm or less, but not for drawing androll forming.

Microwave oven

Type

SPV 224

Color Material

White PVC film

Blue PVC film

Clear PE

Elongation

Tensile strengthN/25mm

220 89

200 50

350 38

Adhesion

Medium

Medium

Low

Standard packaging is shown below.


Coil Unit Weight Diagram

Information Needed to Meet Orders

300

0

400500

600700

800900

1,100

1,200

1,300

1,400

1,600

1,700

1,800

1

2

3

4

5

6

7

8

9

10

11

12

14

13

15

16Coil unit weight (kg/mm)

Coil outer diameter (mm)

400

500

600610

762

700

800

Coil inner diameter (mm)

NoteThis diagram slightly changes with sheet thickness and interleafs.

Stainless steel best offers its features when it is suitable for the usepurposes, design and forming conditions.To select the type of stainless steel meeting your specificrequirements, include in your order as detailed information onthe following items as possible.

1. Steel type, finish and dimensions2. Use and forming method3. Specification requirements: thickness, width, lengthtolerances and packaging unit weight (coil inner diameter)

4. Quantity and time of delivery5. Other

Technical MaterialThis catalog discloses the outline of our stainless steelproducts. For further information, refer to the followingcatalogs and brochures.*A Guide to Stainless Steels (outline of stainless steels)*Characteristics of Stainless Steels (extraction from "A Guide toStainless Steels")*Heat Resistance of Stainless Steels (comparison ofcharacteristics of heat resistant steels)*Catalog for each type of NSS Steels*Stainless Steels for Roofs (catalog ofCoppersoftain, Colorsoftain and Colorsoftain F)

Printed in Japan on recycled paper Q-01 '07.01

Technical information in this booklet, while every reasonable effort was made to ensure the accuracy at the time of this publication, is general information relating to our products only and is not meant as any warranty, expressed or implied. Such technical information does not guarantee that any of our products are suitable for your particular application or purpose. Use of any information contained in this booklet shall be at user's risk. Any information in this booklet is subject to change without prior notice. Please contact Nisshin Steel office for updated information.

Notice

JAPANRegistered Head OfficeShinkokusai Building, 4-1, Marunouchi 3-chome, Chiyoda-ku,

Tokyo 100-8366, Japan

Telephone:81-33216-6312 Facsimile:81-33216-6325

OVERSEASSingapore Representative Office16 Raffles Quay #20-01, Hong Leong Bldg., Singapore 048581

Telephone:656221-1277/8 Facsimile:656224-2357

Bangkok Representative OfficeUnit 6, 35th Floor, CRC Tower All Seasons Place,

87/2 Wireless Road, Phatumwan, Bangkok 10330, Thailand


Guangzhou Representative OfficeRoom 1505, Office Tower, CITIC Plaza, 233 Tian He North Road,

Guangzhou 510613, P.R.China


Subsidiary Nisshin Steel USA, LLC1701 Golf Road, Continental Tower3, Suite1004,

Rolling Meadows, IL 60008 U.S.A.


Tsukiboshi (Shanghai) Steel Treading Co.,Ltd.Shanghai Maxdo Centre 3208-3210, 8 Xing Yi Road,

Hongqiao Development Zone, Shanghai 200336, P.R.China


www.nisshin-steel.co.jp

Documents

nisshin metal and recommendation of metal