Upload
ap00
View
57
Download
1
Tags:
Embed Size (px)
DESCRIPTION
Instruction for Brake Light Switch Replacement
Citation preview
Forums Gallery Members Tools Marketplace New Posts Register Log In
Tweet 0
Maxima Forums > Maxima Discussions > 5th Generation Maxima (2000-2003)
Need help removing brake light switch
Sign in using an external accountUser Name Remember Me?
Password
Register Forgot Password?
Register Photos FAQ Timeslips Members Parts Guide Today's Posts Search Experience Used Cars Garage Vendor Directory
5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited
access to view most discussions and access our other features. By joining
our community, at no cost, you will have access to start new topics,
reply to conversations, privately message other members (PM), respond
to polls, upload content and access many other special features.
Registration is free, fast and simple, so please join Maxima.org today!
Thread Tools Search this Thread Display Modes
02-01-2009, 05:41 PM #1
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Need help removing brake light switch
Anybody has any experience removing the brake ? It is held in place by some kind of
plastic lock nut and I'm not sure what is the trick for removing this part. I tried pressing the side tabs
on that nut while pushing out but was not successful and was afraid of breaking something. Other than
removing the whole brake pedal assembly, I don't know waht to do. The closest information I found
was this thread but there is no mention of anyone actually removing it.
__________________
02-02-2009, 02:21 PM #2
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
I'm picking up the part this evening. I'm still hoping that somebody around these forums, at some
point, had to replace this switch before on his own or know of any detailed How-to.
__________________
Search... Search
light switch
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
1 of 15 1/10/2015 11:59 PM
Activity: 0%
02-02-2009, 02:37 PM #3
pmohrThe Dirty Pearl
Garage is empty, add now
Join Date: Jul 2005
Location: Clinton, TN
iTrader: (26)
Posts: 14,328
Points: 23,256, Level: 93
Activity: 24.0%
Can you take a picture of ? I haven't done one an an A33, but the A32 switches are just a
locknut and an electrical connector.
__________________
A32 CEL Decoder | FSMs | Howto Videos
02-02-2009, 03:07 PM #4
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
These are two views of the switch (along with the cruise control switch)
__________________
the switch
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
2 of 15 1/10/2015 11:59 PM
02-02-2009, 03:09 PM #5
pmohrThe Dirty Pearl
Garage is empty, add now
Join Date: Jul 2005
Location: Clinton, TN
iTrader: (26)
Posts: 14,328
Points: 23,256, Level: 93
Activity: 24.0%
Nice pics. Definitely looks like you need to compress the 4 tabs and push it through the . If you
can't get it by hand, a long set of needle nose pliers should work.
__________________
A32 CEL Decoder | FSMs | Howto Videos
02-02-2009, 03:48 PM #6
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Thanks. That was my impression too, but I was only compressing the two larger ones without any
success. I'll give another try tonight.
__________________
02-02-2009, 05:53 PM #7
NisTechSenior Member
Garage is empty, add now
Join Date: Aug 2006
iTrader: (0)
Posts: 601
Points: 5,106, Level: 45
Activity: 0%
that is like a regular nut. turn it 90 degrees with a pliers and it should go loose and then just pull
the switch out.
when you install it start the car and have it running and push it through the hole and make sure when
you install the plastic you don't ride the pedal as it can be riding the brakes if pressed all the
way in.
__________________
LTB stage II, Progress RSB, FSTB, Poly bushings, Progress/Illumina, 6th gen brakes, Forged SE-R rims
KDW bfg, T1R and OBX headers
02-02-2009, 10:09 PM #8
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Got it!!!!.. This is my humble contribution to the Org for those of you who are in need of replacing the
Stop Lamp Switch (or brake light switch). (Moderators, feel free to move it to the "How-To's" if you feel
it might be helpful to someone).
I became aware of a malfunctioning Stop Lamp Switch in my car when I began having trouble with my
gear selector being "locked", unable to move from Park, unless I manually depressed the .
This started happening on rare ocassions, so I paid little attention to it at first. As it was happening
more often, I began to search for information and found out that the culprit was indeed a defective stop
lamp swicth. I also found out that, while I was having this issue, my brake lights were not working, and
I began noticing that cars behind me were stopping dangerously close to my rear end, since my brake
lights were not doing its job of warning them when I was slowing down.
Before getting down to the brake pedal area to meet in person the cause of the trouble, I was hoping
that it was held in place simply by a couple of metal nuts, like many other cars. To my surprise, it was
held by some kind of plastic lock nut. Not being familiar with the mechanism and procedure involved in
removing the switch, I began to request tips on how to remove it. I trully appreciate the suggestions
made by some fellow org members.
Parts and procedure are as follows:
The picture below shows the Stop Lamp Switch (also known as Brake Light Switch) along with the
packaging displaying the . At a local Nissan dealer, the price out-the-door, including taxes,
was $37.73.
bracket
bolt
lock nut
shift lock
part number
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
3 of 15 1/10/2015 11:59 PM
Since it was a little uncomfortable for me, I removed the plastic cover under the steering wheel so I
can give myself more room to maneuver. Some people may not need to go through this step and save
some time in the process.
The next picture shows the general area where the Stop Lamp and the Automatic Speed Control Device
(ASCD) switches are located. This view is from the driver side floor looking up towards the dashboard.
In order to release the defective part, hold it by the body (where the Nissan logo is) and turn it 45
degrees, in the direction of the arrow shown in the picture below.
This twisting action will cause the switch to pop out towards the harness. (Note the position of the
switch as it is being released).
Completely slide out the switch, disconnect it from the harness and set it aside.
Grab the new switch and connect it to the harness.
Slide it through the hole and push it against the stopper attached to the brake pedal, holding the switch
in the same position as the old switch was when it was released.
While pushing the switch against the stopper, turn it 45 degrees, this time in the opposite direction as
the arrow shows in the picture above, in order to secure it in place.
To finalize, depress and release the brake pedal a few times to make sure the switch is securely in
place, and to test that your brake lights are working.
If everything is in working order, you are done.
__________________
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
4 of 15 1/10/2015 11:59 PM
08-03-2009, 12:21 PM #9
andrew629Newbie - Just Registered
Garage is empty, add now
2001 Maxima GLE
Join Date: Apr 2008
Location: Plano, TX
iTrader: (0)
Posts: 10
You rock dude, thanks for taking the time and putting so much attention to detail in this! You probably
just saved me from dropping a couple hundred out of complete frustration!
08-03-2009, 01:33 PM #10
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Quote:
Originally Posted by andrew629
You rock dude, thanks for taking the time and putting so much attention to detail in this! You
probably just saved me from dropping a couple hundred out of complete frustration!
Thanks. I'm glad this write-up can be of help.
__________________
02-01-2010, 10:01 AM #11
ColombianMaxPlease. Call me John. I
insist
Garage is empty, add now
Maxima
Join Date: Sep 2005
Location: Chicago
iTrader: (7)
Posts: 4,911
Points: 12,821, Level:
73
Activity: 0%
Quote:
Originally Posted by Nelsito65
Got it!!!!.. This is my humble contribution to the Org for those of you who are in need of replacing
the Stop Lamp Switch (or brake light switch). (Moderators, feel free to move it to the "How-To's" if
you feel it might be helpful to someone).
I became aware of a malfunctioning Stop Lamp Switch in my car when I began having trouble with
my gear selector being "locked", unable to move from Park, unless I manually depressed the shift
lock. This started happening on rare ocassions, so I paid little attention to it at first. As it was
happening more often, I began to search for information and found out that the culprit was indeed
a defective stop lamp swicth. I also found out that, while I was having this issue, my brake lights
were not working, and I began noticing that cars behind me were stopping dangerously close to my
rear end, since my brake lights were not doing its job of warning them when I was slowing down.
Before getting down to the brake pedal area to meet in person the cause of the trouble, I was
hoping that it was held in place simply by a couple of metal nuts, like many other cars. To my
surprise, it was held by some kind of plastic lock nut. Not being familiar with the mechanism and
procedure involved in removing the switch, I began to request tips on how to remove it. I trully
appreciate the suggestions made by some fellow org members.
Parts and procedure are as follows:
The picture below shows the Stop Lamp Switch (also known as Brake Light Switch) along with the
packaging displaying the part number. At a local Nissan dealer, the price out-the-door, including
taxes, was $37.73.
Since it was a little uncomfortable for me, I removed the plastic cover under the steering wheel so
I can give myself more room to maneuver. Some people may not need to go through this step and
save some time in the process.
The next picture shows the general area where the Stop Lamp and the Automatic Speed Control
Device (ASCD) switches are located. This view is from the driver side floor looking up towards the
dashboard.
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
5 of 15 1/10/2015 11:59 PM
In order to release the defective part, hold it by the body (where the Nissan logo is) and turn it 45
degrees, in the direction of the arrow shown in the picture below.
This twisting action will cause the switch to pop out towards the harness. (Note the position of the
switch as it is being released).
Completely slide out the switch, disconnect it from the harness and set it aside.
Grab the new switch and connect it to the harness.
Slide it through the hole and push it against the stopper attached to the brake pedal, holding the
switch in the same position as the old switch was when it was released.
While pushing the switch against the stopper, turn it 45 degrees, this time in the opposite direction
as the arrow shows in the picture above, in order to secure it in place.
To finalize, depress and release the brake pedal a few times to make sure the switch is securely in
place, and to test that your brake lights are working.
If everything is in working order, you are done.
Thank you sir, this definitely should be in the stickies. I have to do this on Thursday for a friend's 5th gen
so now I know what to expect. Approximately how long did it take you to do this? Don't mean to bring an
old thread back but why make a new one..
__________________
SHIFT_I cant it's Automatic!!
1993 Maxima GXE Super White, Ebay FSTB, 97-99 SE Rims, KYB GR2s, BlehmCo Lower Tiebar, BlehmCo
Parallel Link Kit, BlehmCo RSTB, BlehmCo Swaybar Links, Addco RSB, z31 rear disc upgrade, Assurance
TripleTreds.
1995 Maxima GXE-5 Dark Blue Pearl, 03 SE TE RIMs, I30 leather w/rear headrests, KYB GR2 on Progress
springs, Progress RSB, ES Poly in front end suspension,WarpSpeed YPipe, Pioneer InDash Navi, Kzoosho
LED tails and FX35 HID retrofit
2002 Maxima SE 6spd Sterling Mist, Tokico Illuminas on Tein H-Techs, Progress Rear Sway Bar
02-01-2010, 10:40 AM #12
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
6 of 15 1/10/2015 11:59 PM
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Quote:
Originally Posted by ColombianMax
Thank you sir, this definitely should be in the stickies. I have to do this on Thursday for a
friend's 5th gen so now I know what to expect. Approximately how long did it take you to do
this? Don't mean to bring an old thread back but why make a new one..
I'd say no more than 10 minutes.
__________________
02-01-2010, 03:14 PM #13
mandyfigSenior Member
Garage is empty, add now
2000 Maxima GLE AT
Join Date: Oct 2009
Location: Atlanta
iTrader: (0)
Posts: 1,228
Points: 3,378, Level: 36
Activity: 1.9%
Thanks for an excellent write up! Nice with great instructions! I hope I never have to do this, but
with your DIY, I shall not be afraid.
__________________
2K Max GLE AT Lustre Gray, SE Titanium Rims...pushing 184k...
04-13-2010, 08:54 AM #14
MatMax01Junior Member
Garage is empty, add now
2001 SE
Join Date: Jan 2004
Location: Pennsylvania
iTrader: (0)
Posts: 15
Points: 7,563, Level: 58
Activity: 0%
WOW thanks for the detail pics. I have been having this problem for months and though is was a
problem with my park neutral switch. My problem wasn't as bad as yours I would press the brake pedal
and after a minute or more I would be able to hear the click and move out of park. Every time I have a
problem with my Max I just search the org site and find my answer. Keep up the good work everyone. I
have been a member for a lot of years and haven't had a chance to reply to post with any good info
that isn't already there
If anyone is in the market for coil packs go to Autozone Duralast. they are the cheapist and they are
from Nissan. but the Nissan logo and part number are ground off. I tried to post this info but I guess I
don't have enough post to do so. I posted pics in my album to see the comparison.
04-13-2010, 08:10 PM #15
MatMax01Junior Member
Garage is empty, add now
2001 SE
Join Date: Jan 2004
Location: Pennsylvania
iTrader: (0)
Posts: 15
Points: 7,563, Level: 58
Activity: 0%
Maybe not the brake light switch
I just when out to see if my brake lights were working and they are just fine. When I turn the key to
accessories I hear a click in the shifter console. when I turn on the car I hear it again. Then I put my
foot on the brake (tail lights work fine) I hear the click again. but I can't push in the button on the
shifter. I have to wait a while for the second click in the shifter handle. sometime this waiting could last
two min. Which switch is going bad.
11-02-2010, 04:15 PM #16
tristanstewartNewbie - Just Registered
Garage is empty, add now
Join Date: Jul 2005
iTrader: (0)
Posts: 2
i dont have enough posts to make my own thread so i guess ill post my question here...
my driver side brake light isnt working. all the lights in the taillight function, its just that the red one
doesnt brighten when i press the brake. i replaced the stop light switch today, but that didnt resolve the
issue.
does anybody have any suggestions?
its kinda funny that im listed as "newbie - just registered" even though i registered in 2005....
11-02-2010, 05:20 PM #17
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Quote:
Originally Posted by tristanstewart
i dont have enough posts to make my own thread so i guess ill post my question here...
my driver side brake light isnt working. all the lights in the taillight function, its just that the
red one doesnt brighten when i press the brake. i replaced the stop light switch today, but that
didnt resolve the issue.
does anybody have any suggestions?
pics
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
7 of 15 1/10/2015 11:59 PM
Points: 6,057, Level: 50
Activity: 0% its kinda funny that im listed as "newbie - just registered" even though i registered in 2005....
I'm going to put it out there, just in case, but is it safe to assume that you already tried replacing that
bulb, or at least tried switching that bulb with the one on the passenger side?
By the way, newbie status is determined by the number of posts you have, regardless of when you
registered.
Also, just so you know, there is a thread for those who can't create one yet, but need to post
questions:
http://forums.maxima.org/5th-generat...on-thread.html
EDIT: If you brake light switch was the problem, none of your brake lights would've worked properly,
not just one.
__________________
Last edited by Nelsito65; 11-02-2010 at 06:08 PM..
11-03-2010, 03:06 PM #18
tristanstewartNewbie - Just Registered
Garage is empty, add now
Join Date: Jul 2005
iTrader: (0)
Posts: 2
Quote:
Originally Posted by Nelsito65
I'm going to put it out there, just in case, but is it safe to assume that you already tried
replacing that bulb, or at least tried switching that bulb with the one on the passenger side?
By the way, newbie status is determined by the number of posts you have, regardless of when
you registered.
Also, just so you know, there is a thread for those who can't create one yet, but need to post
questions:
http://forums.maxima.org/5th-generat...on-thread.html
EDIT: If you brake light switch was the problem, none of your brake lights would've worked
properly, not just one.
i checked them before and they worked. so i thought the problem was intermittent and figured it was
something else. thats when i found this. but i checked them again and the bulb is in fact bad. kinda
sucks because i dont have the stock tailights and had to order bulbs.
as for the newbie status thing...im aware of that, i was more referring to how long ive been on this
forum without a single post. thanks for pointing out the other thread.
EDIT: i was replying based on the email i got so i just saw what you said about the switch controlling all
lights. sure, it wouldve been nice to know that earlier and all, but i got some experience actually doing
something car related. i feel a bit more manly now.
Last edited by tristanstewart; 11-03-2010 at 03:10 PM..
06-16-2011, 01:48 PM #19
jmdcarsNewbie - Just Registered
Garage is empty, add now
Join Date: Jun 2011
iTrader: (0)
Posts: 1
Points: 10, Level: 1
Activity: 0.3%
AWESOME posting with gr8 details.........
Quote:
Originally Posted by Nelsito65
Got it!!!!.. This is my humble contribution to the Org for those of you who are in need of replacing
the Stop Lamp Switch (or brake light switch). (Moderators, feel free to move it to the "How-To's" if
you feel it might be helpful to someone).
I became aware of a malfunctioning Stop Lamp Switch in my car when I began having trouble with
my gear selector being "locked", unable to move from Park, unless I manually depressed the shift
lock. This started happening on rare ocassions, so I paid little attention to it at first. As it was
happening more often, I began to search for information and found out that the culprit was indeed
a defective stop lamp swicth. I also found out that, while I was having this issue, my brake lights
were not working, and I began noticing that cars behind me were stopping dangerously close to my
rear end, since my brake lights were not doing its job of warning them when I was slowing down.
Before getting down to the brake pedal area to meet in person the cause of the trouble, I was
hoping that it was held in place simply by a couple of metal nuts, like many other cars. To my
surprise, it was held by some kind of plastic lock nut. Not being familiar with the mechanism and
procedure involved in removing the switch, I began to request tips on how to remove it. I trully
appreciate the suggestions made by some fellow org members.
Parts and procedure are as follows:
The picture below shows the Stop Lamp Switch (also known as Brake Light Switch) along with the
packaging displaying the part number. At a local Nissan dealer, the price out-the-door, including
taxes, was $37.73.
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
8 of 15 1/10/2015 11:59 PM
Since it was a little uncomfortable for me, I removed the plastic cover under the steering wheel so
I can give myself more room to maneuver. Some people may not need to go through this step and
save some time in the process.
The next picture shows the general area where the Stop Lamp and the Automatic Speed Control
Device (ASCD) switches are located. This view is from the driver side floor looking up towards the
dashboard.
In order to release the defective part, hold it by the body (where the Nissan logo is) and turn it 45
degrees, in the direction of the arrow shown in the picture below.
This twisting action will cause the switch to pop out towards the harness. (Note the position of the
switch as it is being released).
Completely slide out the switch, disconnect it from the harness and set it aside.
Grab the new switch and connect it to the harness.
Slide it through the hole and push it against the stopper attached to the brake pedal, holding the
switch in the same position as the old switch was when it was released.
While pushing the switch against the stopper, turn it 45 degrees, this time in the opposite direction
as the arrow shows in the picture above, in order to secure it in place.
To finalize, depress and release the brake pedal a few times to make sure the switch is securely in
place, and to test that your brake lights are working.
If everything is in working order, you are done.
01-16-2012, 12:11 PM #20
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
9 of 15 1/10/2015 11:59 PM
CARLOS9827Member
Garage is empty, add now
2003 Maxima SE
Join Date: Apr 2004
Location: San Diego, CA
iTrader: (7)
Posts: 171
Points: 10,150, Level: 67
Activity: 0%
Wow I just wanted to say THANK YOU for this. I almost broke my back (literally)...trying to figure out
where the damn brake switch was and once I came across this thread you made everything a lot easier.
Thanks for the Pics too!
__________________
01 Maxima SE Anniversary Glacier Pearl/Frost Leather - 125k
13 Kia Optima SXL -Snow White Pearl - 21k miles
13 BMW 535i M-Sport Alpine White/Black Leather
01-26-2012, 07:08 PM #21
quark4Newbie - Just Registered
Garage is empty, add now
Join Date: Jan 2012
iTrader: (0)
Posts: 1
Points: 5, Level: 1
Activity: 0.3%
Wow! Perfect instructions
Let's hear it for Nelsito65 who posted such lucid and detailed instructions. You should write a DIY
book, my mate. I know I'll buy it.
01-26-2012, 08:16 PM #22
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Thank you guys; appreciate the encouraging feedback. I'm sure very glad that this modest write-up
has helped a few of you tackle the brake light switch.
__________________
01-27-2012, 09:48 AM #23
DennisMikSenior Member
Garage is empty, add now
2000 GLE
Join Date: Apr 2004
Location: Plano, TX
iTrader: (2)
Posts: 6,862
Points: 19,728, Level: 88
Activity: 64.0%
Sometimes something we might think of as a simple little thing will drive us crazy. Having a "how to"
like you have done is really great. Thanks.
03-15-2012, 04:52 PM #24
tinmanjuggernautNewbie - Just Registered
Garage is empty, add now
Join Date: Feb 2012
iTrader: (0)
Posts: 4
Points: 53, Level: 1
Activity: 1.1%
Quote:
Originally Posted by Nelsito65
Got it!!!!.. This is my humble contribution to the Org for those of you who are in need of
replacing the Stop Lamp Switch (or brake light switch).
Thank you sir! I had error code P1572 ASCD Brake Switch on my 2002 Maxima (Cruise control cancel).
Because of your tutorial, I figured out the part I needed to replace, ordered it and swapped it out. I
mistakenly turned it in the wrong direction and it wouldn't come out. (Even with a wrench ). But
when I turned it the correct way, it popped out just as described.
Your contribution is greatly appreciated.
Cory
08-03-2012, 04:47 PM #25
Scott LaRockSenior Member
Garage is empty, add now
Join Date: Mar 2005
iTrader: (5)
Posts: 781
Points: 13,276, Level: 75
Activity: 3.8%
The brake light switch is black and not brown?
__________________
No promotional ads in sigs, thanks
08-03-2012, 07:49 PM #26
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
At least the one I got from Nissan and the defective one in my car were.
__________________
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
10 of 15 1/10/2015 11:59 PM
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
10-05-2012, 07:18 AM #27
shawnmosNewbie - Just Registered
Garage is empty, add now
Join Date: Oct 2012
iTrader: (0)
Posts: 6
Points: 35, Level: 1
Activity: 1.5%
Is this part similar on a 97? I have the opposite problem, my brake lights won't turn off. I had to
unplug the switch so the battery wouldn't run down. The car has been sitting for 1.5years so i think the
rubber stopper dry rotten. I was wondering if just that piece can be fixed.
10-05-2012, 11:31 AM #28
DennisMikSenior Member
Garage is empty, add now
2000 GLE
Join Date: Apr 2004
Location: Plano, TX
iTrader: (2)
Posts: 6,862
Points: 19,728, Level: 88
Activity: 64.0%
It is the same concept but the 4th gen has a 1/4 inch thick metal bar welded to the brake pedal instead
of little tabs that the 5th gen uses. But the 4th gen uses these rubber bumpers to make contact with
the switch.
You can get the bumpers at the dealer or some people have used JB Weld to glue a penny on the brake
arm. Either way, when you are done, the plunger of the switch will still have a little bit of movement
when the brake pedal is not being depressed. If the switch doesn't have any movement, that means
the pedal is resting all its weight on the switch and this will destroy the switch.
Last edited by DennisMik; 10-05-2012 at 11:36 AM..
04-07-2013, 01:35 PM #29
FrankCastroNewbie - Just Registered
Garage is empty, add now
Join Date: Apr 2013
iTrader: (0)
Posts: 1
Points: 10, Level: 1
Activity: 0.5%
Brakes are not responding after replacing rubber stopper.
Hello everyone, I have a 2002 Nissan Maxima.
The other day I realized my brake lights were on after I had turned off my car and had gotten out. I
found a broken stopper for the brake light switch and pulled the fuse when I got home, so I didn't drain
the battery. Fast forward to after I replaced the stopper I had gotten from a dealership, and now the
brake lights are not working at all. I had initially gotten a size to big from the dealerships parts
department, which I installed and then had to cut out because the switch would never be able to
release the plunger. I didn't put the switch back into place because the simply wasn't enough space too.
Not really sure what could be causing this since I had put the fuse back in and even swapped out the
cig lighter fuse which is also a 15 amp fuse. Unless just twisting the switch out of it's harness caused it
to break. I never disconnected it from the wiring, just popped the stopper in and put the switch back in
place.
I should mention the drivers brake light was out when the lights would not turn off. I replaced the bulb
after replacing the stopper, but since all of them stopped working I don't know if that was why it was
out.
Any ideas?
Also, in case anyone else has to put the stopper in, I found a good way to do it is to tape plastic
cards(like an old gift card) together and then put a sticky layer of tape down to hold the stopper to the
card. This allows you to slide into place and then release the brake pedal down onto it. Might need a
little bit of effort to get it in fully.
04-07-2013, 04:14 PM #30
DennisMikSenior Member
Garage is empty, add now
2000 GLE
Join Date: Apr 2004
Location: Plano, TX
iTrader: (2)
Posts: 6,862
Points: 19,728, Level: 88
Activity: 64.0%
Normally the switch having a problem and a burned out bulb are 2 totally separate problems. I suggest
you remove the new bulb that you put in check the fuse for the brake lights and see if the other brake
lights work. Every once in a while you get a bad bulb.
If the brake lights still don't work, remove the brake light switch from the holder and operate it by
hand. If the brake lights work like this, re-install the switch being careful that you don't push it too far
in.
04-12-2013, 06:43 PM #31
The MaximaMember
Garage is empty, add now
2001 Nissan Maxima
Join Date: Dec 2012
Location: Tampa, FL
iTrader: (0)
Posts: 106
Points: 1,603, Level: 23
Activity: 0%
Sorry to resurrect such an old problem, but I'm currently sitting in the garage with my Maxima having
the same problem. My rubber seal is still on, so it must be the switch. I've tried turning the switch to
take it out as hard as I can, but I simply can't get it out. Oh well. I'll just have to disconnect the battery
and take it into the shop tomorrow.
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
11 of 15 1/10/2015 11:59 PM
04-12-2013, 06:48 PM #32
The MaximaMember
Garage is empty, add now
2001 Nissan Maxima
Join Date: Dec 2012
Location: Tampa, FL
iTrader: (0)
Posts: 106
Points: 1,603, Level: 23
Activity: 0%
Holy crap I just realized I was pulling the wrong switch all along. I pulled the all black one and it came
right out. I'm so done right now.
10-25-2013, 07:45 AM #33
StanStanMDNewbie - Just Registered
Garage is empty, add now
Join Date: Oct 2013
iTrader: (0)
Posts: 1
Points: 30, Level: 1
Activity: 0.9%
More than just a Brake Light sometimes
Nelsito65, your instructions are great. I have a 2002 Infiniti Q45 and your clear instructions were 100%
applicable and saved me a lot of time and money. Much appreciated!
What was crazy about the issue was that as I was driving along, my TSC, VSC, Slip, and ABS lights all
came on. When I stopped the car, I could only shift into Neutral and Drive. I couldn't shift into reverse
or park, or remove the key . Although, I could turn off the car and restart it in neutral. My brake
lights also stopped working. Pushing the shift lock release on the shifter console didn't help.
Anyway, I replaced the brake light switch for $40 using an adjustable wrench in 5 minutes with the help
of your instructions. That resolved the warning lights, enabled the brake lights, and released the shifter.
Now if you have a solution for burning oil like an old factory, let me know!
11-16-2013, 11:12 AM #34
Lontar1Puerto Rico-Maxima Lover
Garage is empty, add now
Join Date: Apr 2004
Location: Florida
iTrader: (5)
Posts: 4,704
Points: 15,594, Level: 80
Activity: 6.5%
Going to bring this one on again. My rear light are on all the time after replacing the driver side stop
light. Had to remove the fuse not to drain the battery. What could cause the light to be on all the time?
The switch, the stoppers? I need to fix this fast, hate to be putting the fuse on and off until I can fix it.
Anyway to determine which one is bad? Like I said, I just replace the driver side bulb which was bad
and now they are on all the time even with the car been off. Thanks in advance
__________________
AT TRANNY FLUSH
http://www.cardomain.com/ride/335521/3
________________________________________________
2013 Subaru Legacy 2.5L
2001 Maxima SE
________________________________________________
Quote of the Year.....!!!!
djfrestyl - The noobosity is high in this thread.
11-16-2013, 12:43 PM #35
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Quote:
Originally Posted by Lontar1
Going to bring this one on again. My rear light are on all the time after replacing the driver side
stop light. Had to remove the fuse not to drain the battery. What could cause the light to be on
all the time? The switch, the stoppers? I need to fix this fast, hate to be putting the fuse on and
off until I can fix it. Anyway to determine which one is bad? Like I said, I just replace the driver
side bulb which was bad and now they are on all the time even with the car been off. Thanks in
advance
I wonder if the "piston" portion, on the brake light switch, is stuck in the depressed position causing the
brake lights to be on all the time, as if you were pushing on the brake pedal. If you haven't tried it yet,
you might want to take a closer look at that part.
I'm referring to the tip that comes out of the left part in the picture below:
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
12 of 15 1/10/2015 11:59 PM
Never mind the "depressed" part; that piston is supposed to be depressed all the time unless you're
stepping on the brake.
__________________
Last edited by Nelsito65; 11-16-2013 at 12:52 PM..
11-16-2013, 12:52 PM #36
Lontar1Puerto Rico-Maxima Lover
Garage is empty, add now
Join Date: Apr 2004
Location: Florida
iTrader: (5)
Posts: 4,704
Points: 15,594, Level: 80
Activity: 6.5%
Checked the switch and its a broken stopper. Funny, thy want 5 bucks for a piece is rubber... you got to
be kidding me. Oh well, going to order it on Monday
__________________
AT TRANNY FLUSH
http://www.cardomain.com/ride/335521/3
________________________________________________
2013 Subaru Legacy 2.5L
2001 Maxima SE
________________________________________________
Quote of the Year.....!!!!
djfrestyl - The noobosity is high in this thread.
11-16-2013, 12:55 PM #37
Nelsito65Senior Member
2003 Nissan Maxima
My Garage
2003 Maxima SE TE
Join Date: Aug 2008
Location: Brandon, FL
iTrader: (0)
Posts: 896
Points: 6,057, Level: 50
Activity: 0%
Quote:
Originally Posted by Lontar1
Checked the switch and its a broken stopper. Funny, thy want 5 bucks for a piece is rubber...
you got to be kidding me. Oh well, going to order it on Monday
I thought about the stopper after I posted the reply. That allows the piston to freely stick out all the
way,causing the switch to "read" as if you are applying the brakes.
__________________
11-17-2013, 05:25 PM #38
Lontar1Puerto Rico-Maxima Lover
Garage is empty, add now
Got an easy fix on the stopper. Glue together 5 pieces of plastic and then, JB weld it to the metal
harness. Problem fixed for now until I get the part I ordered.
__________________
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
13 of 15 1/10/2015 11:59 PM
Tweet 0
Join Date: Apr 2004
Location: Florida
iTrader: (5)
Posts: 4,704
Points: 15,594, Level: 80
Activity: 6.5%
AT TRANNY FLUSH
http://www.cardomain.com/ride/335521/3
________________________________________________
2013 Subaru Legacy 2.5L
2001 Maxima SE
________________________________________________
Quote of the Year.....!!!!
djfrestyl - The noobosity is high in this thread.
03-08-2014, 04:29 PM #39
raincityJunior Member
Garage is empty, add now
2000 I30
Join Date: Dec 2009
Location: Pacific Northwest
iTrader: (0)
Posts: 29
Points: 3,686, Level: 38
Activity: 1.1%
Stop lamp replacement on a 2000 I30 / Maxima
These pictures were extremely helpful but on my 2000 I30 the crowded area around the brake light
switch made it pretty much impossible to get a grip on, either with tools or with my hand. The solution
that worked was removing the cruise control switch to create enough clearance to access the brake
light switch. Once that was done I was able to get a grip on the brake light switch with a pliers and
twist it. Snapping them both back into place was very easy.
10-15-2014, 01:25 PM #40
20th_Anniv. MaxNewbie - Just Registered
Garage is empty, add now
Join Date: Jun 2013
iTrader: (0)
Posts: 3
Points: 1,011, Level: 17
Activity: 4.2%
Thank you very much for the informative instructions on changing the brake light switch. What was
seemingly an easy part swap-out, turned into a difficult project unless you are a small framed
individual...which I am not!
I dropped the dash panel for better access which helped and pulled out the cruise control switch (brown
capped connector). Although I could barely see the brake light switch due to the steering column and
very tight quarters, I was able to feel my way thru and made the swap.
A couple things to keep in mind when changing out the switch:
1. Using long needle nose pliers to loosen the switch(s) and turning counter clockwise to remove is
much easier than by hand
2. Don't confuse the brake light switch with the cruise control switch (brown connector housing on
end).
Found my brake light switch at AutoZone for $30.
10-15-2014, 01:25 PM
MaximaOrgNissan Maxima
Paid Advertisement
Previous Thread | Next Thread
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
14 of 15 1/10/2015 11:59 PM
Posting Rules
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off
Forum Rules
All times are GMT -7. The time now is 02:55 AM.
Advertising - Jobs - Contact Us - Maxima Forums - Archive - Privacy Statement - Terms of Service - Top
Need help removing brake light switch - Maxima Forums http://maxima.org/forums/5th-generation-maxima-2000-2003/581812-need-help-removing-brak...
15 of 15 1/10/2015 11:59 PM