Night-Vision Spy Camera Watch Manual

Step 1: Hold down button A for 1 second to turn device on.Step 2: Both red and blue light will flash to indicate device is on.*Note: Press buttons A & C at the same time to restart the watch.

unscrew and plug in here

lights will show here

How to Turn On Your Device

How to Charge Your Device

Step 1:Unscrew button E to reveal hidden port.

Plug included cable into port (cylinder side).Plug USB end of cable into included wall outlet charger. Red & blue light will flash

to indicate charging.

Step 2a:Or plug USB end of cable into USB port on

computer to charge device.

Step 2b:

plug here

A. Mode SwitchB. Indicator LightC. IR Mode

D. Time AdjustE. USB PortF. Invisible IR

G. Microphone HoleH. Camera Lens

Watch Key

Microphone Structures

Step 1: Hold down button A for 2 seconds to turn on video mode. Blue light will flash to indicate video mode.Step 2: Press down button C once to start recording video. Blue light will flash to indicate recording has started.Step 3: Press button A twice to stop and save recording. Press button A again to restart recording.

How to Record Video

Step 1: Press button A twice to turn on camera mode. Blue light will flash to indicate camera mode.Step 2: Press button C once to enter camera standby mode. Red light will flash to indicate standby.Step 3: Press button A once to take a picture. Red light will flash to indicate picture was taken & saved.

How to Take a Picture

Step 1: Press button A twice to get to camera mode. Blue light will flash to indicate camera mode.Step 2: Press button C twice to enter voice standby mode. Red and blue light will flash to indicate voice standby.Step 3: Press button A once to start voice recording. Red and blue lights will flash while voice recording.

How to Record Audio

Step 1: Hold down button C until red light flashes 3 times to turn IR on.Step 2: Press button C once, blue light flashes 3 times to turn IR off.

How to Operate IR Night Vision

lights show here -

Nut A: MIC 1 Nut B: MIC 2

1. Microphone2. Hole

3. Nut

4. Rubber Fitting

Nut A and Nut B are both designed to fit over the microphone hole (G) Nut A has a hole and is designed for transmitting sound. You would use Nut A when you would want to record sound. Nut B has a rubber fitting and is designed to repel water and dirt. When you use Nut B you cannot record sound.

*Charging Time - Wall Outlet: 4-6 hours | Computer: 24 hours

!

!

!

!

!

!

!

!

!

!

!

!

Step 1:Unscrew button E to reveal hidden port.

Plug included cable into port (cylinder side).Plug USB end of cable into USB port on

computer.

Step 2:Open My Computer, click on the

removable drive that appears. Files will be in the folder in the drive.

Step 3:

How to View Media Files on Your Computer

unscrew and plug in here

plug here

The watch cameras recording time for video is displayed in this format: year - month - day hour : minutes : secondsStep 1: Connect the watch to your computer via USB cable.Step 2: In My Computer, the watch will show up as a Removable Disk drive.Step 3: Open Notepad program in Windows.Step 4: Type (current date & time) Ex.- 2013.01.05 13:30:30 YStep 5: Save the file as time.txtStep 6: Save the file in the root/main directory of the Removable Disk drive.Step 7: Unplug the USB cable and then reboot/reset the watch.Video and photographs will now display the time and date on the bottom right corner.*Note: If you want to turn the time and date stamp off type an N instead of Y.

How to Set Time and Date

1. If the storage/memory is full, the blue light and red light will shine for about five seconds.2. If the battery is low, the blue light and red light will shine alternately for about five seconds.3. This watch is ONLY to be used in lawfully ways. If you are unsure of your local laws involving audio and video recording, check with your local government before using.4. After not using the watch for a long time, you will need to charge the battery.5. The working temperature of the watch is 0 - 45 C, but it is better to use the watch in room temperature.6. The working humidity of the watch is 20% - 80% with waterproof nut. Before you apply waterproof nut, do not put into water or humid place.7. It is best not to use the watch in a dusty environment.8. It cannot be used in high magnetic or electric fields.

*Please contact us if you need any more information or help with the watch.

Visit - www.GadgetsAndGear.com

Answers to Frequently Asked Questions

*Note: If having problems playing videos, please download and install VLC Player at www.videolan.org

!

!

!

!

!

!

!

!

!

!

!

!