NIE INSTITUTE OF TECHNOLOGY · Board / IIT / University Institute and place where studied Year of passing B.E Mysore University ... Harsha N, Dr. A V Suresh and ... in Simulation

NIE INSTITUTE OF TECHNOLOGY

(Approved by AICTE. New Delhi and affiliated to VTU, Belgaum)

No. 50 (part), Hootagalli Industrial Area, Koorgalli Village, Mysore – 570018 Phone :0821-2403734 Fax: 0821-2403732

Email:[email protected] Website: www.nieit.ac.in

FACULTY PROFILE

FACULTY ROFILE

FACULTY PROFILE

Teaching Research Industry

31 Year

20Year 01 Year

Name of the Faculty: Dr. A.V SURESH

Designation PROFESSOR & HEAD

Contact Number 9243111460

Email Id [email protected],

[email protected]

Education Qualification:

Qualifications

Board / IIT / University Institute and place

where studied

Year of passing

B.E Mysore University

National Institute

of Engineering,

Mysore

1984

M.E Bharathiar University

P.S.G. College of

Technology

(Through GATE)

1992

Ph. D. Mysore University C.M.R.T.U,

Bangalore 2003

Work Experience:

mailto:[email protected]

mailto:[email protected]





RESEARCH/ WORKING EXPERIENCE:

Sl.

No.

Period Post & Organization No. of Years and

months

Year Month

1 July 1st .2019 till date Professor & Head, Dept.Mech. Engg.NIEIT,Mysuru 0 03

2 Sept.2013 to

June.2019 Professor, Department of Mech. Engg. BMSIT 05 09

3 Feb.2012 to Aug.2013 Professor and Dean Academics,RVCE 01 06

4 Jan 2009 to 2012 Professor & Head IEM department,RVCE 03

5 DEC.2006 to Jan2009 Director / AP, EDC, Dept. of Mech. Engg. RVCE 03 02

6 Aug2004 to Dec 2006 Asst. Professor, Dept. of ME, RVCE 02 03

7 Sep1999 to Aug.2004 Sr. Lecturer , Dept. of ME, RVCE 05

8 Sep.1993- sep1999 Lecturer, R V C E, Bangalore 06

9 Mar.1992- Jan.1993 Design Engineer, Batliboi, & Company, Surat, Gujarat

State 10

10 Feb1987- Aug1990 Lecturer, Dept. Of ME, College of Engineering, Loni,

Maharastra State 03 06

12 July1985- Dec1986

Lecturer, Dept.of Mech. Engg., Bapuji Institute of

Engineering & Technology, Davanagere, Karnataka

State

01 05

RESEARCH SPECIALIZATION

i) Design & Manufacturing

ii) Sensor Technology and Automation

iii) Materials Science

iv) Supply Chain Management

v) Software Quality Engineering

vi) Software Reliability Engineering

vii) E-Procurement

viii) Information Security

ix) Rapid Prototyping





RESEARCH PROJECT UNDER TAKEN :

Sl. No Project Title Sponsored

Agency Period

Grant

(Lakhs)

(INR) or(₹)

Capacity

01

Development of S/W

for the Design &

Drafting of Mirror

Drill Jigs

DST 1996-99

4.93

PRINCIPAL

INVESTIGATOR

02

Variation of

Corrosion Behavior of

Cryogenic

Temperature Chilled

Cast Iron

UGC

1997-

2000.

6.5

PRINCIPAL

INVESTIGATOR

03

Computer Aided

Design and Drafting

of Machine Tool Gear

Box

UGC 1999-

2002 4

PRINCIPAL

INVESTIGATOR

04

Evaluation of Thermal

Properties of E-Glass

Short Fiber and

Silicon Carbide

Reinforced

composites

ISRO 2004-

2006

4.2

PRINCIPAL

INVESTIGATOR

05

Investigation on

Degradation of Glass

Fiber Reinforced

Epoxy Composites by

Ultraviolet radiation

and condensation

UGC 2004-

2006 1

PRINCIPAL

INVESTIGATOR





06

Development and

Characterization of

Nanometallic

Magnets for Naval

applications

NRB, DRDO 2008-2010 49.80

PRINCIPAL

INVESTIGATOR

07

Fretting and HCF

Behavior of Blade-

Disc Dovetail root-

Joints of Fan Module

of Gas-Turbine

Engines

ARDB, DRDO 2007-

2009

9.10

PRINCIPAL

INVESTIGATOR

08

Fretting of Blade-Disc

Dovetail root-Joints of

Fan Module of Gas-

Turbine Engines

AICTE 2007-

2009

7.00

PRINCIPAL

INVESTIGATOR

09

Development,

characterization and

testing of MWCNT

polymer composite

for fused deposition

process

NRB

2010 –

2012 42 CO INVESTIGATOR

10

Establishing Non

Destructive Testing

Laboratory for Post

Graduate Courses and

Research

VISION GROUP

ON SCIENCE &

TECHNOLOGY

2012 –

2013

40.00

PRINCIPAL

INVESTIGATOR





PAPERS PRESENTED / PUBLISHED IN INTERNATIONAL & NATIONAL

JOURNALS 1. Minal Moharir and A V Suresh published a paper on “An adaptive technique using Advanced

Encryption standard to implement hard disk security” at International Journal of Innovative

Technology and Creative Engineering, Vol. 1, No.2, pp. 8-11, ISSN: 2045-8711, April 2011.

2. D Venugopal Setty, T.M. Rangaswamy and A.V. Suresh – research article on “Analysis and

Clustering of Nifty Companies of Share Market using Data Mining Tools” published in International

journal of Advanced Engineering Technology (IJAET), Vol. 1, Issue 1, PP 152 – 164, ISSN 0976

7916, 2010.

3. M N Vijaya Kumar, A.V. Suresh and K N Subramanya published a paper on “Application of an

Analytical Hierarchy Process to Prioritize the Factors Affecting ERP Implementation” at

International Journal of Computer Application (IJCA), May 15, 2010.

4. Vikram N B and A V Suresh published a paper on “AN APPROACH FOR SOFTWARE TESTING

TO IMPROVE RELIABILITY” at International Journal of Mathematics, Computer Sciences and

Information Technology Vol. 4, No 1, January-June 2011, pp. 125-135

5. Vikram N B, A V Suresh and N.S. Narahari “Feasibility Study to Implementation Open source ERP

software” at International journal of Applied Engineering Research (IJAER)

6. Suinl R Y and A.V. Suresh published a paper on “Empirical Study of Current Procurement practices in

SME’s in India” at Internal Journal of Mathematics, Computer Sciences and Information Technology, Vol. 3,

No. 2, pp 115-120.

7. Minal Moharir and A V Suresh published a paper on “An adaptive technique to implement Disk

security” at International Journal of Engineering Studies, Vol. 2, No.3, pp. 285-289, ISSN: 0975-

6469, July 2010.

8. A.V. Suresh and Minal Moharir “Comparison and analysis of advanced Encryption Standards with

safety” at International Journal of Engineering Research and Technology, Vol. 3, No. 3, pp. 499 –

507, ISSN: 0974 - 3154, August 2010.

9. Minal Moharir and Dr. A V Suresh published a paper on “TrueCrypt: An Innovative Approach for

Hard disk security” at Advances in Computational Sciences and Technology, Vol. 3, No.3, pp. 305 -

312, ISSN: 0973 - 6107, August 2010.

10. Minal Moharir and A V Suresh published a paper on “Comparison and Analysis of Advanced

Encryption Standards” at International Journal on Computing, pp. 445-451, ISSN: 2010-2283

11. A.V Suresh & H.D Gopala Krishna, “Cold expansions of holes and resulting fatigue life

enhancement and residual stresses in AL 2024 T3 alloy – An experimental study”; International

journal on engineering failure analysis of elsevier. (DOI INFO: 10.1016 / JENGFAILANAL), 2009.

12. A.V Suresh & H.D Gopala Krishna, “Experimental study of induced and residual stresses in cold

expanded hole by ball and tapered mandrel methods”; International journal of materials science,

ISSN 0973-4589, Vol. 4, No. 2, pp 115-123, 2009.

13. A.V Suresh & H.D Gopala Krishna, “Enhancement of Fatigue characteristics by Elasto – Plastic

Analysis of pre stressed holes”, International journal on Design and Manufacturing Technologies,

ISSN 0973 – 9106, Vol. 2, No. 1, pp 10 – 13, 2008.

14. Harsha N, Dr. A V Suresh and Nagaraja “Implementation of lean concepts in the construction

engineering project” International Journal of Engineering Research and Technology,ISSN 2278-

0181,vol.2.issue 5.pp.1078-1085,2013.

15. Harsha N, Dr. A V Suresh and Nagaraja “Design and development of lean construction Algorithm to

identify,prioritise,measure and eliminate waste in the construction engineering project ” International

Journal of Civil Engineering Research and Applications,ISSN 2249-426X,vol.1.issue 3.pp. 1-

10,2013.





16. Satishkumar. A.V.Suresh. S.C.Sharma,H.Radha,”Study and analysis of drilled holeon JFRP

sandwich structures in various surrounding conditions”,International Journal of Industrial Research

& Development,ISSN 0976-0979, Vol.5,issue 1, pp.01-09,2014.

17. Satishkumar,A.V.Suresh,Srinivas.S. H.Radha,”Study the chemical stability effect of thermal barrier

coating by thermal Testing and FEA” International Journal of Scientific and Engineering Research

,ISSN 2229-5518,Vol.5,Issue 6,pp498-501,June 2014.

18. Venkatesh hosamani & Dr. A. V Suresh “ Design and Analysis of Rudder Hinges of an Aircraft”

International Journal of Advances in Scientific Research and Engineering (IJASRE) ISSN: 2454-

8006, [Vol. 02, Issue 08, Sep -2016] www.ijasre.net

19. Ambresh Borole | Dr.A.V.Suresh | Dr.N.Suresh | Bincy Rose Vergis “International Journal for

Modern Trends in Science and Technology ISSN: 2455-3778: Volume: 03, Issue No: 12, December

2017.

20. R.N. Nandini,M Krishna and A.V.Suresh “Effect of Calcination Kinetics and Microwave Sintering

Parameters on Dielectric and Pieizo-Electric Properties of (K0.5Na0.5) NBO3 Ceramics” Iranian

Journal of Materials Science & Engineering Vol. 15, No. 2, June 2018. DOI: 10.22068/ijmse.15.2.14

21. Nandini R. Nadar, Krishna M. Suresh A.V., Narasimha Murthy H.N. “Effect of MWCNTs on

piezoelectric and ferroelectric properties of KNN composites” Materials Science & Engineering B

231(2018) 40-56, journal homepage: www.elsevier.com/locate/mseb

PAPERS PRESENTED / PUBLISHED IN INTERNATIONAL & NATIONAL

CONFERENCES

1. A.V Suresh presented a paper on Characterstisation of lead kyanite metal matrix composite in national

seminar conducted on Advanced composite materials at Ghousia college of engineering, Ramnagar,

Bangalore (17th Sept to 19th Sept 2003).

2. A.V Suresh presented a paper on Optimization of C/D ratio of adjacent pre-stressed holes using finite

element analysis in National Conference on “Advances in Mechanical sciences” AIMS 2007 at

Kumaraguru college of Technology, Coimbatroe on 23rd March 2007

3. A.V Suresh presented a paper on Finite element analysis of pre-stressed fastener holes for optimum

fatigue performance for automotive applications National Conference on “Advances in Mechanical

sciences”AIMS 2007 at Kumaraguru college of Technology, Ccoimbatroe on 23rd March 2007

4. A.V. Suresh and Chandrakanth.V presented a paper on “Conceptual design and development of

composite fuel tank for a light aircraft” at national conference on Rapid Prototyping and

Manufacturing – RPM 2009 at R.V. College of Engineering, Bangalore during 12th - 13th May 2009

5. A.V.Suresh, K. Sivalingam and Plakkeel Jose presented a paper on “Rapid Prototyping and Rapid

Tooling in injection mold design” at national conference on Rapid Prototyping and Manufacturing –

RPM 2009 at R.V. College of Engineering, Bangalore during 12th - 13th May 2009

6. A.V Suresh presented a paper on “Design considerations for Magnetorheological Fluid Devices” at

National conference on Mechanical Engineering Research and Development (NCMERD) organized

by SNS College of Technology, Coimbatore on 12th March 2009.

7. M N Vijayakumar, A.V. Suresh and Vikram B presented a paper on “Statistical Modeling Approaches

to ERP Implementation” at 2nd National conference on Software Engineering NCSE-09 sponsored by

AICTE, IEEE – SMC and Accenture at Dept. of MCA, M.S. Ramaiah Institute of Technology,

http://www.ijasre.net/

http://www.elsevier.com/locate/mseb





Bangalore during 6th and 7th November 2009.

8. Sunil RY, Dr. A V Suresh, C K Nagendra Guptha presented a paper on “Electronic Procurement: a

Literature Review and Directions for Future Research” at International Conference on Latest Trends

in Simulation Modeling and Analysis, Department of Mechanical Engineering, NIT Calicut, during

17th–19th December 2009.

9. Vikram N B, Dr. A V Suresh, Vijayakumar M N presented a paper on “Review of Literature and

Research opportunities in the field of Software Reliability” at International Conference on Latest

Trends in Simulation Modeling and Analysis, Department of Mechanical Engineering, NIT Calicut,

during 17th–19th December 2009.

10. A.V. Suresh and Minal Moharir presented a paper on “Information Security with Full Disk

Encryption” National Conference on Network Security and Information Retrieval (NCNSIR 2009),

December 14th 2009 at Department of Master of Computer Applications R. V. College of Engineering

Bangalore, Department of Computer Science Avinashilingam University for Women Coimbatore

11. M.N. Vijayakumar and Dr. A.V. Suresh presented a paper on “Study and analysis the Quality issues in

ERP implementation” at International Conference on Emerging trends in Engineering and Technology

(ICETET-09) at Nagpur during 16th – 18th December 2009

12. A.V. Suresh and Minal Moharir presented a paper on “Comparison & Analysis of Full disk

Encryption” at International Conference on ' Emerging Trends in Computer Science, Communication

& Information Technology ' (ICECSCTIT2010), organized by the Department of Computer Science &

Information Technology, Yeshwant Mahavidyalaya, during 09-11 January, 2010 at Nanded

13. V Ravishankar, M N Vijayakumar and Dr. A.V. Suresh presented a paper on “Review of Literature

Survey on CMMI Implementation” at International conference on Advances in Industrial Engineering

Application” department of Industrial Engineering, Anna University Chennai during 6 – 8 January

2010.

14. Vikram N B, A.V. Suresh and Vivekanand S Gogi presented a paper on “Software Reliability and

Testing Strategies” at International conference on Advances in Industrial Engineering Application”

department of Industrial Engineering, Anna University Chennai during 6 – 8 January 2010.

15. Vivekanand S Gogi, Dr. A.V. Suresh and Vikram N B presented a paper on “Knowledge

Management: An Emerging Discipline in Organization” at International conference on Advances in

Industrial Engineering Application” department of Industrial Engineering, Anna University Chennai

during 6 – 8 January 2010.

16. A.V. Suresh and Minal Moharir presented a paper on “Automation of Software Testing” at National

conference on Computing, Communication and Technology at R V College of Engineering, during

22nd – 23rd Jan 2010

17. A.V. Suresh and Minal Moharir presented a paper on “Study and Analysis of FDE” at National

conference on Computing, Communication and Technology at R V College of Engineering, during

22nd – 23rd Jan 2010

18. A.V. Suresh and Minal Moharir,“Framework of Disk Security” at National conference on Computing,

Communication and Technology at R V College of Engineering, during 22nd – 23rd Jan 2010

19. A.V. Suresh and Minal Moharir,“Analysis of Encryption Standards” at National conference on

Emerging Trends in Electronics Engineering and Computing E3C 2010” at JD College of Engineering,

Nagpur during 9th & 10th February 2010.

20. A.V. Suresh and Minal Moharir presented a paper on “Comparison & Analysis advanced Encryption

Standards” at IIIrd International Conference on Computer Games, Multimedia & Allied Technology,

6th -7th March 2010 SMU, Singapore





21. A.V. Suresh and Minal Moharir,“Study of Full Disk Encryption” at National conference on

Informative and Innovative Technologies, NCIIT 2010 organized by RR Institute of Technology,

Bangalore during 27th March 2010.

22. Keshavmurthy D B. A.V. Suresh and Sunil R Y presented a paper on “Application of Six-sigma

concept for minimizing in-process rejection – A case study” at International Conference on

Convergence of Science and Engineering in Education and Research A Global perspective in the new

millennium (ICSE 2010) at Dayananda Sagar College of Engineering, Bangalore during April 21st –

23rd April 2010.

23. A.V. Suresh and Minal Moharir, “Disk trust: Design and Implementation of information security” at

4th National conference on Recent Trends in Communication, Electronics and Information

Technology NACTECIT’10 at CMR Institute of Technology during April 23rd – 24th 2010.

24. A.V. Suresh and Minal Moharir presented a paper on “An Adaptive Technique to implement Disk

Security” at National Conference on “Communication Networks and Security” at Dept. of

Telecommunication and PG Studies, R V College of Engineering on May 17 2010.

25. A.V. Suresh,Vikram N B and Dr. N S Narahari “Feasibility Study to Implement Open Source

Enterprise Resource Planning Software” at International Conference on Advanced Materials,

Manufacturing, Management and Thermal Sciences” (AMMMT – 2010)

26. Sunil R Y. A.V. Suresh, and Keshavmurthy D B “An empirical investigation of factors that hinder the

success of implementing e-procurement and strategy towards e-procurement adoption in SME’s in

India” at International Conference on Advanced Materials, Manufacturing, Management and Thermal

Sciences” (AMMMT – 2010)

27. A.V. Suresh, M N Shruthi and Dr. H.N Narasimha Murthy presented a paper on “Process study of D-

SST Fused Deposition Modeling Machine by Experimental Method and FEA” at International

conference on “Operational Excellence for Global Competitiveness” at department of Industrial

Engineering and Management, R.V. College of Engineering, Bangalore during 3rd – 5th February

2011.

28. A.V. Suresh, Mahantesh M Math, Prashant V and W Shivaraj presented a paper on “EPEI: Lean

Implementation tool For Manufacturing Excellence in an Automotive Pump Industry” at International

conference on “Operational Excellence for Global Competitiveness” at department of Industrial

Engineering and Management, R.V. College of Engineering, Bangalore during 3rd – 5th February

2011.

29. M N Vijaya Kumar, A V Suresh and S Karthik, “Changing Goal Post Software Development Life

Cycle Model for Indian Software SME’s” at International conference on “Operational Excellence for

Global Competitiveness” at department of Industrial Engineering and Management, R.V. College of

Engineering, Bangalore during 3rd – 5th February 2011.

30. A V Suresh and M Uday “ Conceptual Design Process for an Assembly fixture designed for an

Aircraft Component using CAD” at National Conference on “Trends and Advances in Manufacturing

Engineering” at PES Institute of Technology during 29th – 30th September 2011.

31. Keshavamurthy D.B, Vijayakumar.M.N, Dr. A.V.Suresh presented a paper on “Force Field Analysis

for successful ERP Implementation” at 54th National Convention and International Conference

Paradigms for global Challenges and opportunities: Vision – 2025 organized by Indian Institution of

Industrial Engineering (IIIE) during 29th – 31st October 2012.

32. Harsha N, Dr. A V Suresh and Nagaraja presented a paper on “Business Opportunities and Challenges

created by Lean Construction” at Nation Conference on Emerging Business Opportunities and

Challenges 2013 at R V Institute of Management, Bangalore during 22nd – 23rd March 2013.





33. Harsha N, Dr. A V Suresh and Nagaraja presented a paper on “Challenges and Opportunities in the

implementation of Green Building Technology” at Nation Conference on Emerging Business

Opportunities and Challenges 2013 at R V Institute of Management, Bangalore

CONSULTANCY WORK

Dr. A.V. Suresh the faculty members Mr. K.V.S Rajeswara Rao, Mr. V Ravi Shankar, Mr. Sunil R Y

and Mr. R Shekar successfully completed consultancy work on “Ergonomical evaluation of Hammer

mills” for M/s. Buhler India Ltd.

AWARDS

Dr. A.V. Suresh received awards for “Excellence in Education” given by R.V. College of Engineering

during Republic Day celebration on 26th January 2010.

UGC Carrier Award, 1999-2002, UGC, India

Academic excellence appreciation award by Rapid Prototyping Society of India 2013

SPECIAL ACHIEVEMENTS

Executed a Memorandum of Understanding between RAPITECH Solutions Inc., Bangalore and R.V.

College of Engineering, IEM Department Bangalore to start the state-of-the art Rapid Prototyping and

Manufacturing Centre (RPMC) on 21st August 2009.

Opened a center on “Rapid Prototyping and Manufacturing Centre” at department of Industrial

Engineering and Management on 13th November 2009 to provides intensive training on the RPM

technology to the employees and staff of R V College of Engineering, funded by NRB.

Instrumental in setting up state of art Supply Chain Management for VII Semester Autonomous

Scheme.

Established Non Destructive Testing Laboratory funded by VGST in 2012 at Department of IEM

Guest lecture delivered on” Routing” flight program at Akshaya Pathra 0n june 18-24, 2014

MEMBERSHIP

1. Life Member of Indian Society for Technical Education (LM 6834)

2. Member of Quality Circle Forum of India (QCFI) - 039921110143

3. Life Member of Indian Institution of Industrial Engineer Engineering (IIIE) SS9988

4. Life Member of Institute of Standards Engineers BLM 1089





ADDITIONAL RESPONSIBILITIES

PROFESSOR , DEPARTMENT OF MECHANICAL RVCE:(1993-2009 JAN)

Member of the Internal Project Evaluation Committee

In charge of CAD/CAM Centre

NBA coordinator

PG programme coordinator

Established FMS centre

Modernized Machine shop/Workshop for UG Programme

Research Initiatives to get funds from various Agencies

Time Table Officer Department level

INDUSTRIAL ENGINEERING & MANAGEMENT RVCE(2009-2012) Professor and Head

Chairman of Student club-IDEA

Editor of the Newsletter of department of IEM “The Management”,

Chairman – Board of Studies ( Autonomous Scheme),

Chairman – Board of Examiners ( Autonomous Scheme)

Coordinator – NBA ,TEQUIP

Chief Executive Director - Rapid Prototyping and Manufacturing Centre –

Editor –RP Magazine

Convener - Techno-Cultural exchange program the department of Industrial Engineering and

Management, in conjunction with University of Pittsburgh, USA.

COLLEGE RVCE FEB.2012-SEP 2013) DEAN ACADEMICS

Dean Academics-Academic Quality Enhancement & implementation

Conduction of BoS & Academic Council meeting

MoU with Research Lab & other reputed university National/International

Preparation of Institution Academic Calendar

Creation of Centers of Excellence

Expansion of Academic Plan

Registration of students for Academic program

Award of medals and degrees

Up gradation of library and resources

Arranging expert Talks

Maintaining Academic record as per the University rules and regulation and implementing

Academic rules and regulation of autonomous

Member of Academic Monitoring Committee

Academic Council Member

Member of Grading committee

Member – Anti Sexual Harassment and Dress Code Monitoring Committee

Member – Industry Institute Interaction

Secretary & Treasurer – Indian Society for Technical Education





UNIVERSITY: VTU

Valuer for undergraduate courses

Valuer for Post graduate courses

Member of Board of Examiner(VTU)

Involved in the formulation of syllabus for BE (IEM) of VTU

Involved in setting of Model question paper for BE (IEM) of VTU.

Doctoral Review Committee Member – Avanashilingam University, Coimbatore

Member of Board of Examiner – PG Studies PESCE, Mandya

Member of Board of Studies – Dr. AIT, Bangalore

Member of Board of Examination MSRIT,Bangalore.

Local Inquiry Committee (LIC) Member VTU (2014-15,2017-18).

Member of BoS of Dayananda Sagar College of Engineering nominated by VTU(2015-2017)

Presently Member of BoS Mechanical Engineering Board(2015-2019)

Ph.D Thesis Reviewer for VTU &Bangalore University.

Member of Subject Expert for Bangalore University (For Backlog Vacancies)

COLLEGE BMSIT &M:

Departmental Assignment:

Coordinator for VIII semester Technical seminar (Even Semester)

NBA and NAAC Co-coordinator College Level.

Chief Co-coordinator of Student Project Assessment and Review Committee.





PH. D GUIDED / GUIDING:

Sl.

No.

Name of the

Candidate

Date of

Registration

Internal /

External

University Title

Guided

1. H.D.GOPALKRISHNA April 2004 Internal VTU

Study of cold hole expansion

process and evaluation of

fatigue properties of life

limited critical aero-engine

components

Guiding

1. SATISH KUMAR 2012 External Drillability study on FRP

2. NANDINI R 2013 External VTU

Modeling ,Simulation & Analysis

of novel Peizo Electric Materials

3 MANJUNATH.V 2013 External VTU

Crash Analysis And Design

Optimization of Welded Joints

For Automotive

Applications

4 DIVYASHREE.S 2013 External

VTU

(MSc

Engineering by

research )

Reliability Assessment of natural

fiber reinforced laminated composites

CONFERENCES ATTENDED:

• 15thIndia Innovation summit2019,Orgainised by CII Bengaluru & Government of Karnataka

Participated in Indian Technology Congress 2014(ITC 2014) on Advanced Technology as Change

Agent to Make India an Economic Superpower at NIMHANS Convention Centre, Bangalore on

21st and 22nd of August 2014 and also attended workshop on “Delivering High Performance

Collaborative Research and funding opportunities" conducted by National Design and Research

Forum at ITC 2014.

Attended Two Days International Conference on Additive Manufacturing, 3D Printing and 3D

Scanning at Hotel Hilton, Chennai on 6th and 7th of Feb organized by VEL Tech University.

NBA and NAAC Co-coordinator College Level.





COMPUTER SKILL:

i) Solid Edge

ii) ANSYS (FEA Package)

iii) Pro-E

iv) CAPSTURN and CAPSMILL (CAM Software)

WORKSHOP / SEMINARS ORGANIZED / CONDUCTED /ATTENDED:

1. Worked as coordinator in National Seminar on Advances in Composite and metal matrix Technology

and its application sponsored by Aeronautical Society of India Bangalore.

2. Conducted one-day workshop on Condition based maintenance of machineries 2001 sponsored by

RVCE.

3. Conducted One-day workshop on Advances in Heat Transfer, Nov 2000, sponsored by R.V.C.E.

4. Worked as coordinator for Indo-German workshop on Automotive Engineering, sponsored by R.V.C.E.

5. Worked as a coordinator for one-day national seminar on Cold Hole expansion Technology, sponsored

by AICTE and RVCE.

6. Worked as coordinator for one-day seminar on Advanced welding Techniques sponsored by L&T and

R.V.C.E.

7. Attended a Three day National Workshop on “ADVANCES IN MANUFACTURING PROCESSES

AMP-2008” at NIT, Warangal from 8th to 10th August 2008.

8. Attended a two day international conference “Design 1st conference”at M.S. Ramaiah School of

Advanced studies, Bangalore, on 16th and 17th October 2008.

9. Attended one day Leadership Development programme organized by R.V. College of Engineering, at

Shakthi Hill Resort, Bangalore on 31st October 2009

10. Attended Bangalore IT.biz India’s premier ICT event 2011 at Lalit Ashok on 18th October 2011

11. Attended CII Karnataka Annual Conference on “Environment and Sustainability: Sustainability

from Strategy to Growth” at Hotel Chancery Pavilion, Bangalore on 6th February 2012.

12. Two days Leadership Excellence Workshop organized by International Academy for Competency

Enhancement at Hotel Atria during 24th & 25th June 2013.

13. Guest lecture delivered on” Routing” flight program at Akshaya Pathra 0n june 18-24 2014.





CONFERENCE / SEMINAR / WORKSHOP CONDUCTED :

Two days National Conference on “Rapid Prototyping and Manufacturing-RPM 2009” organized

by Dept. of Industrial Engineering and Management, R.V. College of Engineering, Bangalore in

collaboration with Rapitech Solutions INC, India during 12th – 13th May 2009.

As a part of Techno-Cultural exchange program the department of Industrial Engineering and

Management, R V College of Engineering, Bangalore in conjunction with University of Pittsburgh,

USA is offered a two week, 3 credit summer program in India during 9th – 20th August 2009.

Walk a thon was arranged to propagating the message Go Green as a part of the department’s social

concern for environmental protection on 8th November 2009.

SYNERGY – 2009, a techno management festival organized by department of IEM, RVCE during 14th

– 15th November 2009.

One day seminar on “Energy Conservation by M/s. Petroleum Conservation Research Association

(PCRA)” by Mr. B.V.S Prasad at dept. of IEM, RVCE on 02/02/2010.

One day seminar on “Application of QA in Industries” by Venkat Ramkrishna Akkina, HP on 20th

February 2010.

One day workshop on “e-Waste Management” organized by Dept. of IEM, RVCE sponsored by ED

Cell, RVCE on 25th March 2010

Two days orientation program on “Intellectual Property Right” during 30th – 31st July 2010.

One day Preconference workshop of three days International conference on “Operational Excellence for

Global Competitiveness” – ICOEGC-2011, organized by Dept. of IEM, RVCE on 3rd -5th February

2011.

International Conference on Operational Excellence for Global competitiveness, organized by

Dept of Department of Industrial Engineering & Management R.V.College of Engineering, Bangalore-

560059 in association with ABCON Information Systems Pvt Ltd, during Feb 3rd -5th 2011.

One day seminar on “ Recent trends in Software Quality and Reliability” organized by Dept of

Industrial Engineering & Management, R V College of Engineering with the support from ED Cell,

RVCE on April 13, 2011

Two days’ workshop on “Intellectual Property Right” during 18th – 19th August 2011.

SYNERGY – 2011, a techno management festival organized by department of IEM, RVCE during 3rd

– 5th November 2011

Three days’ workshop on “Management Practices for Business Excellence and Sustainability”

organized by Department of Industrial Engineering and Management, RVCE during 8th – 10th August

2012

Documents

NIE INSTITUTE OF TECHNOLOGY · Board / IIT / University Institute and place where studied Year of passing B.E Mysore University ... Harsha N, Dr. A V Suresh and ... in Simulation