NGN Seismic Network Bay Kit - Cablcon Seismic Network Bay Kit NEWTON STRUCTURAL COMPONENTS Newton Instrument Company is one of the largest domestic suppliers of hardware solutions

NGN Seismic Network Bay Kit

NEWTON STRUCTURAL COMPONENTS

Newton Instrument Company is one of the largest domestic suppliers of hardware solutions to the Telecommunications market. Cablcon is pleased to offer Newton network infrastructure and cable management products.

Cable & Connectivity Solutions

DALLAS • DETROITCorporate Offices: 379 Executive Drive • Troy, MI 48083-4561Phone: 888.8.CABLCON • Fax: 248.588.1462 • www.cablcon.com

NGN SEISMIC NETWORK BAY KIT, 7’ CLOSED, 1-1/4 X 1/2”

Features• Designed specifically to cross the boundary of EIA Wide and GR-63.• This is a seismically tested (Zone 4) rack with 17.75˝ between the uprights on the 19˝ version (according to the EIA 310 guidelines).• It provides open access to the base and integral cable tie bars for faster installation.• Frame includes anchor kit and junction kit plate.

Notes• Dimensional information: refer to table.• Equipment mounting: refer to tables for mounting hole spacing and mounting spaces. All racks are double side drilled and tapped as shown.• Meets the earthquake criteria (seismic Zone 4) of Telcordia document GR-63-core, issue 1, sections 4.4 and 5.4, when loaded with 500 pounds to simulate rack mounted equipment.• Base mounting pattern (refer to section a-a) meets the criteria of GR-63-core, figure 2-1b.• Product weight (pounds, approximate): 7´–0˝ (100).

Part Number Rack 22317200xx 19”

Rack A B C D E F 19” 17-3/4” 18-5/16” 21-7/8” 19-7/8” 137/16” 8-3/8”

Item QTY Description 1 1 19” Seismic Network Bay 2 1 Seismic Anchor Kit 3 1 Seismic Junction Kit

Seismic Network Bay Kit





SEISMIC NETWORK BAY KIT, 7’ CLOSED, 1-1/4 X 1/2”

Features• Designed specifically to cross the boundary of EIA Wide and GR-63.• This is a seismically tested (Zone 4) rack with 21.50˝ between the uprights on the 23˝ version (according to the EIA 310 guidelines).• It provides open access to the base and integral cable tie bars for faster installation.• Frame includes seismic installation kit, isolation pad and junction plate.

Notes• Dimensional information: refer to table.• Equipment mounting: refer to tables for mounting hole spacing and mounting spaces. All racks are double side drilled and tapped as shown.• Meets the earthquake criteria (seismic Zone 4) of Telcordia document GR-63-Core, Issue 1, Sections 4.4 and 5.4, when loaded with 500 pounds to simulate rack mounted equipment.• Base mounting pattern (refer to section a-a) meets the criteria of GR-63-Core, Figure 2-1b.• Product weight (pounds, approximate): 7´–0˝ (100).• Contains Cable Tie Bar Kit.

Part Number Rack 22317300xx 23”

Item QTY Description 1 1 23” Seismic Network Bay 2 1 Seismic Anchor Kit 3 1 Seismic Junction Kit

Rack A B C D 23” 17-3/4” 22.312” 25.875” 18.432”

XX: Finish Code 30 = Telco Gray 47 = Black

1RU TopTrough Kit





Part Number Rack 22433001xx 19” 22433002xx 23”

Item QTY Description 1 6 Wire Retaining Clip 2 2 120-24 x 3/8 PHMS 3 2 #12 External Tooth Washer 4 1 Cable Trough with 15°

XX: Finish Code 30 = Telco Gray 47 = Black 87 = Yellow

1RU Bottom Trough Kit






Item QTY Description 1 6 Wire Retaining Clip 2 2 120-24 x 3/8 PHMS 3 2 #12 External Tooth Washer 4 1 Cable Trough

XX: Finish Code 30 = Telco Gray 47 = Black 87 = Yellow

Wire Management Rack Kit





Part Number Depth Rack Width 22054453xx 5˝ 19˝ 22054454xx 8˝ 19˝ 22152500xx 4˝ 19˝ 22152600xx 2˝ 19˝ 22152602xx 0˝ 19˝ 22152700xx 6˝ 19˝ 2205445730 10 19” 22054401xx 3˝ 23˝ 22054402xx 4˝ 23˝ 22054403xx 5˝ 23˝ 22054404xx 8˝ 23˝ 22054405xx 2˝ 23˝ 22054406xx 6˝ 23˝ 22054407xx 10˝ 23˝ 22152601xx 0˝ 23˝

Part Number Depth Rack Width 22054409xx 5”-8.5” 23” 22054459xx 5”-8.5” 19” 22054410xx 3”-4.5” 23” 22054460xx 3”-4.5” 19”

Item QTY Description 1 2 12-24 PHMS 2 1 Wire Rack

Item QTY Description 1 4 12-24 PHMS 2 2 “L” bracket 3 1 “U“ strap

WIRE MANAGEMENT RACK KIT

ADJUSTABLE WIRE MANAGEMENT RACK KIT

Wire Management Panel Kit



Wire management panel with bolt on D-Rings for managing fiber or copper cables

Wire management panel with bolt on D-Rings and spools for managing fiber or copper cables

1RU wire management panel with spools for managing fiber or copper cables









Item QTY Description D1 AR 12-24 Hex Nut 2 AR #12 External Tooth Washer 3 1 Wire Management Panel 4 AR 12-24 X 1/2˝ PHMS 5 AR 3-1/2˝ x 3-1/2˝ D-Ring

Item QTY Description D1 AR 12-24 Hex Nut 2 AR #12 External Tooth Washer 3 1 Wire Management Panel 4 AR 12-24 X 1/2˝ PHMS 5 AR 3-1/2˝ X 3-1/2˝ D-Ring 6 4 Distribution Spool

Item QTY Description D 1 1 1RU Wire Management Panel 2 2 12-24 X 1/2˝ PHMS 3 2 Distribution Spool

WIRE MANAGEMENT PANEL KIT

WIRE MANAGEMENT PANEL KIT WITH SPOOLS

1RU CABLE MANAGER WITH SPOOLS

NSCM (Newton Steel Cable Management)



Follow the steps below to complete your 12 Character ordering number



NSCM A A A B B B X X NSCM: NEWTON STEEL AAA: OVERALL BBB: WIDTH OF XX: FINISH CABLE MANAGEMENT HEIGHT* CABLING SECTION CODE 012 = 1’-0” height 361 = single sided, outside 30 = Telco Gray (extension for 072 or 084) width dimension of 3.65” 47 = Black 024 = 2’-0” height 601 = single sided, outside (extension for 072 or 084) width dimension of 6.00” 072 = 6’-0” height 101 = single sided, outside width dimension of 10.00” 084 = 7’-0” height 365 = double sided, outside width dimension of 3.65” 096 = 8’-0” height 600 = double sided, outside width dimension of 6.00” 108 = 9’-0” height 100 = double sided, outside width dimension of 10.00” *Other heights available. Call your Cablcon Sales Representative for more information. Note: Designed to mount on NEWTON UNEQUAL AND EQUAL FLANGE RACKS.

Cable Management Spools





Part Number Kit QTY 22232700xx 1 22232701xx 6

Item QTY Description 1 AR #8-32 x 5/16” RHMS 2 AR 8-32 Hex Nut 3 AR #8 Flat Washer 4 AR Cable Manager Spool


Ground Bar Kit





Part Number Rack Spaces @ 1” 2243275013 23” 20 2243275113 19” 16

Part Number Rack Spaces @ 1” 2243270013 23” 20 2243270113 19” 16

Item QTY Description D1 1 Ground Bar 3/16” x 1-1/2” 2 2 12-24 x 3/4 RHMS

Item QTY Description D 1 1 Ground Bar 3/16” x 1-1/2” 2 2 12-24 x 1” PHMS 3 2 Ground Bar Insulator 4 2 12-24 x 3/4 RHMS

GROUND BAR KIT

GROUND BAR KIT WITH INSULATORS

Horizontal Separator Manager, 1RU





Newton 23” 1RU cable manager is designed to offset fiber from copper in a single horizontal rack unit space.

Features• 1RU mounting space.• Cable Management Spacer allows for horizontal cable housing with less than 2.5” offset from equipment.• Cable Management is painted yellow for easy identification.• Holes in back of black spacer allow for lacing.• Ambidextrous mounting for left or right side.

Part Number Mounting Rack 22412001xx Inside 19” 22412002xx Inside 23” 22412003xx Outside 19” 22412004xx Outside 23”

Item QTY Description 1 4 12-24 x 1/2” PHMS 2 4 12-24 x 1/4” PHMS 3 8 #12 External Tooth Lock Washer 4 1 1RU Wire Management Panel


Cable Bracket



Notes• xx= Finish Code (Standard finish xx= 30).• Material: Steel.• Kit contains mounting screw.



Part Number L 00404105xx 6


Sufer Isolation Kit





Part Number Spacer Kit 0046160300 21-11/16˝

Item QTY Description 1 4 Insulation bushing 2 1 Isolation pad

Documents

NGN Seismic Network Bay Kit - Cablcon Seismic Network Bay Kit NEWTON STRUCTURAL COMPONENTS Newton Instrument Company is one of the largest domestic suppliers of hardware solutions