NFW7300WW_Dimension Guide_EN

Embed Size (px)

Citation preview

  • 8/7/2019 NFW7300WW_Dimension Guide_EN

    1/1

    Front-Loading Automatic Washer

    PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

    NFW7300W

    Electrical:A 120 volt, 60 Hz., AC only, 15- or 20-amp,used electrical supply is required. A time-delay useor circuit breaker is recommended. It is recommendedthat a separate circuit serving only this washer beprovided.

    Custom undercounter installation-washer onlyWasher dimensions

    Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are or planning purposes only. For complete details, see Installation

    our products, we reserve the right to change materials and specifcations without notice. Instructions packed with product. Specifcations subject to change without notice.

    Re. W1025271

    06/201

    For closet installation, with a door, the minimum ventilation openings in the topand bottom o the door are required. Louvered doors with equivalent air ventilationopenings are acceptable.

    For cabinet installation, with a door, the minimumventilation openings in the top are required.

    Drain System Options

    Standpipe drain system - wall or foor (views A & B)The standpipe drain requires a minimum diameterstandpipe o 2" (50 mm). The minimum carry-awaycapacity can be no less than 17 gal. (64 L) per minute.

    The top o the standpipe must be at least 30" (762 mm)high and no higher than 96" (2.4 m) rom the bottomo the washer.

    Laundry tub drain system (view C)The laundry tub needs a minimum 20 gal. (76 L)capacity. The top o the laundry tub must beat least 30" (762 mm) above the foor.

    Floor drain system (view D)The foor drain system requires a siphon break thatmay be purchased separately. See Tools and Parts.

    The siphon break must be a minimum o 28" (710 mm)rom the bottom o the washer. Additional hoses mightbe needed.

    *** Min. top and bottom air openingsor closet door.

    *** External exhaust elbow requiresadditional space.

    *** Wall, door and foor molding mayrequire additional spacing.

    501/4"

    (1276 mm)

    27"(686 mm)

    36"(914 mm)

    301/2"(775 mm)

    27"(686 mm)

    1"(25 mm)

    1"(25 mm)

    2" (50 mm)

    36" min.(914 mm)

    3"(76 mm)

    48"(1220 mm)

    3"(76 mm)

    48 in.2

    (310 cm2)

    24 in.2

    (155 cm2)

    1"(25 mm)

    4"(102 mm)

    301/2"(775 mm)

    A B

    38" min.(965 mm)

    1"(25 mm)

    27"(686 mm)

    A B

    1"(25 mm)

    1"(25 mm)

    4"(102 mm

    301/2"(775 mm)

    3"(76 mm)

    3"(76 mm)

    48 in.2*

    (310 cm2)

    24 in.2*

    (155 cm2)

    1"***(25 mm)

    1" (25 mm)

    27"(686 mm)

    1"***(25 mm)

    51/4"**(133 mm)

    12" (305 mm)

    72"(1829 mm)

    1"(25 mm)

    (178 mm)7"

    (178 mm)7"

    (229 mm)9"

    (102 mm)4" (25 mm)

    1"

    (686 mm)27"

    (800 mm)311/2"

    30" min.(762 mm)

    30" min.(762 mm)

    28" min.(710 mm)

    A - Side view - closet or confned area

    B - Closet door with vents

    A - Recessed area

    B - Side view - closet or confned area

    A. B.

    C. D..

    Recessed or closet installation - Washer on pedesta

    Recessed or closet installation - Stacked washer and dryer