104 avenue Frédéric Mistral - 38 670 Chasse-sur-Rhône - FranceTél : +33 (0)4 78 07 38 45 - Fax +33 (0)4 78 07 37 67 - tmsi@condat.fr - www.condat.fr

TBM shield sealing

WR 90 NewGeneration First filling of the brushes

WR 89 NewGeneration Permanent sealing of tail seal brushes

Condat Emergency Seal To be used in case of brushes damage

TBM Bearing sealing & luBricaTion

HBW New Generation Main bearing sealing compound

GR 217 EP / GR 217 S EP Biodegradable* EP grease

GR 130 EP EP grease

CONDAT D HFDU Hydraulic fluids

ground TreaTMenT

CLB F5 Range Foaming agents

TFA Range Polymers & additives

F 11/M Bentonite cake improver for hyperbaric interventions

WT Range Water absorbers

VI Range Viscosity improvers

grouTing & consolidaTion

CONDAT A Stabilizer LCONDAT B Accelerator Bi-component grouting

CONDAT Stab Range Additives for groundconsolidation/Waterproofing

Condat has been supplying the tunnelling market for more than 20 years.Its wide range of high performing products has already been used on more than 4,500 km around the world.Efficiency, safety and protection of the environment are major concerns for Condat.Continuous laboratory research has allowed to develop a comprehensive range of readily biodegradable products with auto extinguishing properties: the NewGeneration “range” proves to have a higher performance with lower environmental impact and increased fire safety for people and equipment.

Other products are available to meet specific jobsite requirements. * OECD 301 B

Cré

a. C

ON

DAT

- Rév

. 2 -

06 -

2014