NewAge Industries' Tubing and Hose for Medical …...4 Silcon ® Silicone Tubing Meets FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces Able to resist extreme

® Medical Tubing

www.newageindustries.com

2 www.newageindustries.com

Tu b i n g f o r M e d i c a l D e v i c e s & A p p l i c a t i o n s

123c Medical Tubing

Tubing for medical applications mustmeet a number of requirements. Amongthose are cleanliness, flexibility, non-toxicity, the ability to withstandsterilization, chemical compatibility andresistance, and the absence of certainplasticizers and other leachables. NewAgeIndustries offers a broad line of tubing andhose products engineered to meet thesedemands.

Our silicone products offer a wide rangeof temperature use and are clean roommanufactured for purity. Peroxide cured

silicone offers added durability, thanks toits post-production curing, while ourplatinum cured products providesmoother surfaces, higher purity, fewerleachables, better clarity and lower proteinbinding.

TPE tubing is sterile weldable and heatsealable for aseptic connectivity. Itcontains no silicone oils and offers lowpermeability as compared to silicone.

Polyurethane provides excellent tensilestrength along with flexibility. Thisbiocompatible material is highly resistantto kinking and abrasion and is well suitedfor pneumatic control systems.

Cost-effective PVC handles a variety offluids and gases in pressure and vacuum

applications. It’s made from non-toxicingredients that conform to FDA

standards, and it may be RF (radiofrequency) welded and sealed.

Most styles offered by NewAgeIndustries meet USP Class VIrequirements and do notcontain DEHP or BPA.NewAge also offers anantimicrobial formulation.

Thermoplastic rubber, or TPR,tubing offers outstanding

compression characteristicsand toughness for peristaltic

pump use and maintains goodflexibility at low temperatures.

Contact us today with your medicaltubing application questions!

800-506-2934 • [email protected]


Note: NewAge Industries does not produce or sell human-implantable silicone products.

Made in U.S.A.

3www.newageindustries.com

123c

Tu b i n g f o r M e d i c a l D e v i c e s & A p p l i c a t i o n s

Medical Tubing

Look for these icons signifying products made inU.S.A. and with solar power, those certified as

Animal Derived Ingredient Free, and those listed byNSF, the National Sanitation Foundation.

C O N T E N T S

Silcon®

Silicone tubing . . . . . . . . . . . . . . . . . .4

Silcon Medical Medical grade silicone tubing . . .5

Silbrade®

Braid reinforced silicone hose . . .6

Silbrade Medical Medical grade braid reinforced silicone hose . . . . . . . . . . . . . . . . . . . .7

AdvantaSil® APST Platinum cured silicone tubing . .8

AdvantaSil APSH Platinum cured braid reinforced silicone hose . . . . . . . . . . . . . . . . . . .10

AdvantaSil APHP Platinum cured high pressure silicone tubing . . . . . . . . . . . . . . . . .11

AdvantaSil APSPG Platinum cured pump grade silicone tubing . . . . . . . . . . . . . . . . .12

AdvantaFlex®

Biopharmaceutical grade TPE tubing . . . . . . . . . . . . . . . . . . . . . . . . .13

Superthane®

Transparent polyurethane tubing . . . . . . . . . . . . . . . . . . . . . . . . .15

Urebrade®

Transparent braid reinforced polyurethane hose . . . . . . . . . . . . .17

Clearflo® 70 Clear, phthalate free PVC tubing . . . . . . . . . . . . . . . . . . . . . . . . .18

Clearflo Ag-47 Clear antimicrobial phthalate free tubing . . . . . . . . . . . . . . . . . . . .20

Nylobrade®

Clear, phthalate free, braid reinforced PVC hose . . . . . . . . . . .21

Newflex®

Spiral reinforced PVC suction hose . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Suprene®

TPR tubing . . . . . . . . . . . . . . . . . . . .23

Made withSolar Power


Silcon®

S i l i c o n e Tu b i n g

■ Meets FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces

■ Able to resist extreme temperature variation: -100°F to 500°F(350°F maximum for NSF applications†)

■ Translucent natural color for visual contact with the flow

■ Resilient, stretchable, and resistant to compression set

■ Reusable — will withstand repeated sterilization^■ Odorless, tasteless and inert

■ Good electrical and weatherability properties— resists U.V., ozone, gases and moisture

■ Listed by the National Sanitation Foundation(NSF-51) for food equipment materials†

■ Conforms to 3-A Sanitary Standards for Number 18-03(Multiple Use Rubber and Rubber-Like Materials)

■ Free of BPA, latex and phthalates; RoHS compliant

NotesThe most outstanding properties of SILCON are its

flexibility and resistance to temperature extremes. These,plus its good electrical properties and ability to self-extinguish, make SILCON an excellent choice for medicalappliances.

Peroxide-cured SILCON contains no sulphur or otheracid-producing chemicals, thereby eliminating thepossibility of staining, corroding, or deterioratingmaterials it contacts. It is extremely resistant to ozoneand U.V. over long time periods.

Care is recommended in the selection of fittings andclamps for SILCON as sharp barbed fittings or unlinedmetal clamps could tear into the tubing wall and possiblycause a failure.

^SILCON may be low pressure steam sterilized in-line orautoclaved at up to 250°F in a normal autoclaving cycle.However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventuallyrelax and become gummy. It should then be replaced.

Colors for industrial applications are availablethrough minimum order — call for details.

SILCON is not recommended for implantable or in-body uses or for continuous steam applications.

Physical Properties**Hardness, Shore A ±5 50Tensile Strength, psi 1444Elongation at Break, % 608Tear Resistance, Die B, ppi 125Modulus at 100%, psi 186Brittle Temperature, °F -100Max. Operating Temperature, °F 500†Max. Operating Temperature for NSF, °F 350

**Values listed are typical for the material used in manufacture,except where noted, and are meant only as a guide to aid indesign. Field testing should be performed to find the actual valuesfor your application.

LBS.PER

100 FT. 0.50 1.34 0.66 1.58 0.88 2.00 3.32 4.92 2.14 3.64 1.22 2.64 4.12 6.14 1.50 3.34 5.12 7.50 3.66 6.30 4.32 7.14 10.16 16.72 7.70 5.84 9.50 13.12 15.00 6.86 11.34 13.38 22.86 17.64 26.56

WORKINGPSI AT 70°F*

102010151020252820205

202015105

20151010101010151055

1010555

105

10

ID(IN.)

1/161/163/323/321/81/81/81/8

5/325/323/163/163/163/161/41/41/41/4

5/165/163/83/83/83/8

7/161/21/21/21/25/85/85/85/83/43/4

OD(IN.)

1/83/165/327/323/161/4

5/163/8

9/3211/321/4

5/163/8

7/165/163/8

7/161/2

7/161/21/2

9/165/83/45/85/8

11/163/47/83/4

13/167/811

1-1/8

STANDARDLENGTH

(FT.)100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100

5050

PART NO.

280 0084280 0161280 0315280 0392280 0469280 0546280 0623280 0700280 0854280 0931280 1008280 1085280 1162280 1239280 1393280 1470280 1547280 1624280 1778280 1855280 1932280 2009280 2086280 2163280 2240280 2317280 2394280 2471280 2548280 2625280 2702280 2779280 2856280 3087280 3164

Add length suffix to part number whenordering. Example: 100 ft. of 1/16” I.D. x 1/8”O.D. tubing is part number 280 0084-100.Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.BOLD indicates the critical dimension for fittings application.

Made in U.S.A.

Custom Services■ Cut ■ Size ■ Color ■ Hardness ■ And More

Call for more information: 800-506-3924 or 215-526-2300

Recommended Fittings & Clamps ■ Thermobarb® barbed fittings■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond hose clamps ■ Worm gear clamps

Peroxide Cured

123c Medical Tubing

APPLICATIONS• Surgical drains • Fluid handling• Drug delivery • Blood analysis• Suction and irrigation lines• Dialysis equipment



123c

M e d i c a l G r a d e S i l i c o n e Tu b i n g

Silcon® Medical

ID(IN.)

.0301/32.0401/161/165/64.1041/8

3/163/161/41/41/4

5/165/163/81/2

OD(IN.)

.0655/32.0851/8

3/161/8

.1921/4

5/163/83/8

7/161/2

7/161/25/85/8

STANDARDLENGTH

(FT.)5050505050505050505050252525252525

SUGGESTEDSIZES FORPUMPS††

•

•

• • • •

• •

PART NO.

281 0304281 0381281 0458281 0689281 0766281 0843281 0920281 0997281 1151281 1228281 1305281 1382281 1459281 1536281 1613281 1844281 1921*

WALL(IN.)

.0181/16.0231/321/16.024.0441/161/163/321/163/321/8

1/163/321/8

1/16

Sold by standard coil length only. Add length suffix to part number when ordering.Example: 50 ft. of .030” I.D. x .065” O.D. tubing is part number 281 0304-50.††Most common peristaltic pump sizes based on I.D. and wall requirements.BOLD indicates the critical dimension for fittings application.*Limited stock availability; lead times and minimums may apply — call for details.

Recommended Fittings & Clamps

■ Thermobarb® barbed fittings ■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond hose clamps ■ Worm gear clamps

■ Finished product meets USP Class VI requirements

■ Manufactured under good manufacturing procedures in acontrolled environment

■ Able to resist extreme temperature variation: -100°F to 400°F

■ Reusable — will withstand repeated sterilization^■ Translucent natural color for visual contact with the flow

■ Odorless, tasteless and inert

■ Raw materials meet FDA requirements per FDA 21 CFR 177.2600for use with food contact surfaces

■ May be used in peristaltic pumps


Made in U.S.A.

Peroxide Cured

Notes

SILCON MEDICAL tubing is made under goodmanufacturing procedures and conforms to thebiocompatibility requirements of USP Class VI.SILCON MEDICAL’s surface properties resiststicking and encrustation and will not supportbacteria growth. The tubing is soft, pliable, andcontains no plasticizers which could leach out,causing flow contamination or tube hardening.

Care is recommended in the selection andapplication of fittings and clamps as sharpbarbed fittings or unlined metal clamps couldtear into the tubing wall.

^If exposed to repeated steam sterilization orlong-term high temperature or pressure, siliconewill eventually relax and become gummy. Itshould then be replaced.

Peroxide-cured SILCON MEDICAL tubing issupplied in individual, non-sterile, heat-sealedpolybags and should be sterilized prior to use.

Platinum-cured silicone tubing is available;see page 6.

SILCON MEDICAL is not recommended forimplantable or in-body uses or for continuoussteam applications.

Physical Properties**

Hardness, Shore A ±5 60Tensile Strength, psi 1305Elongation at Break, % 429Tear Resistance, Die B, ppi 177Modulus at 100%, psi 230Brittle Temperature, °F -100Maximum Operating Temperature, °F 400

**Values listed are typical for the material used in manufacture, except where noted, and are meant only asa guide to aid in design. Field testing should be performed to find the actual values for your application.

Medical Tubing

APPLICATIONS• Surgical drains• Drug delivery• Suction and irrigation lines• Dialysis equipment• Fluid handling• Blood analysis

Custom Services■ Size ■ Color ■ Hardness ■ And More



■ Open mesh polyester braiding incorporated within the walls of silicone tubing

■ Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for usewith food contact surfaces

■ Reusable — will withstand repeated sterilization^■ Translucent natural color for visual contact with the flow


■ Odorless, tasteless and inert

■ Excellent weatherability properties — resists U.V., ozone, gases,moisture, and extreme temperatures

■ Designed for elevated pressure applications

■ Listed by the National Sanitation Foundation (NSF-51) for food equipmentmaterials





Silbrade®

B r a i d R e i n f o r c e d S i l i c o n e H o s e

Custom Services■ Color■ Hardness ■ Overbraid ■ And More


■ Cut■ Size

LBS. PER

100 FT.579

111317232836

WORKINGPSI AT 70°F

233 216 208 183 166 141 116 91 75

ID(IN.)

1/83/161/4

5/163/81/25/83/41

OD(IN.)

.365 .447 .520 .592 .655 .800 .9651.1001.380

STANDARDLENGTHS

(FT.)100100100100100

50, 1005050

25, 50

PART NO.

290 0072 290 0149 290 0226 290 0303 290 0380 290 0457 290 0534 290 0611 290 0765*

WALL(IN.)

.120

.130

.135

.140

.140

.150

.170

.175

.190Cut coils are available; charges apply — call for details.Add length suffix to part number when ordering. Example: 100 ft. of 1/8” I.D. x .365” O.D.hose is part number 290 0072-100.Working pressures are calculated from burst testing using a 3:1 safety factor. Applicationtesting is recommended.BOLD indicates the critical dimension for fittings application.*Limited stock item in 25 ft. length; lead times and minimums may apply — call for details.

Peroxide Cured

NotesThe construction of SILBRADE enables

silicone tubing to handle increased pressureapplications. SILBRADE offers outstandingresistance to temperature extremes and is madefrom raw materials that meet FDA requirements.

The flexible design and construction ofSILBRADE also allows excellent bend radii andpermits instal lation in restricted spaces withoutimpeding flow.

SILBRADE, a peroxide-cured product, containsno sulphur or other acid-producing chemicalsthereby eliminating the possibility of staining,corro ding, or deteriorating other materials itcontacts. It is also resistant to ozone and U.V. overlong time periods.

Care is recommended in the selection offittings and clamps, as sharp barbed fittings orunlined metal clamps could tear into the hosewall and possibly cause a failure, especially atelevated pressures.

^SILBRADE may be low pressure steam sterilizedin-line or autoclaved at up to 250°F in a normalautoclaving cycle. However, if exposed to repeatedsteam sterilization or long-term high temperature orpressure, silicone will eventually relax and becomegummy. It should then be replaced.

SILBRADE is not recommended forimplantable or in-body uses or for continuoussteam applications.

Physical Properties**Hardness, Shore A ±5 – Liner 70Hardness, Shore A ±5 – Cover 60Tensile Strength, psi 1460Elongation at Break, % 320Tear Resistance, Die B, ppi 100Modulus at 100%, psi 415Brittle Temperature, °F -99Maximum Operating Temperature, °F 350

**Values listed are typical for the material used in manufacture except where noted, apply to the hose linerexcept where noted, and are meant only as a guide to aidin design. Field testing should be performed to find theactual values for your application.

123c Medical Tubing

Made in U.S.A. Made withSolar Power


123c

M e d i c a l G r a d e B r a i d R e i n f o r c e d S i l i c o n e H o s e

Silbrade® MedicalPeroxide Cured

■ Open mesh polyester braiding incorporated within the walls of silicone tubing


■ Translucent natural color for visual contact with the flow


■ Reusable — will withstand repeated sterilization^■ Odorless, tasteless and inert

■ Raw materials meet FDA requirements per FDA 21 CFR 177.2600for use with food contact surfaces

■ Manufactured under good manufacturing procedures in acontrolled environment


NotesSILBRADE MEDICAL’s construction consists of

a liner of silicone elastomer, an open polyesterbraid reinforcing layer, and a cover layer of silicone elastomer. Good manufacturingprocedures, including lot traceability, are applicable to all Class VI ingredients. SILBRADEMEDICAL is a peroxide-cured product.

The hose’s smooth bore, coupled with itsresistance to allow material to adhere to the tubewall, facilitates easy cleaning and system purging.

^SILBRADE MEDICAL may be low pressure sterilized in-line or autoclaved up to 250°F in anormal autoclaving cycle. If exposed to repeatedsteam sterilization or long-term high temperatureor pressure, silicone will eventually relax andbecome gummy. It should then be replaced.

Care is recommended in the selection andapplication of fittings and clamps, as sharpbarbed fittings or unlined clamps could tear intothe hose wall and possibly cause a failure, especially at elevated pressures.

Peroxide-cured SILBRADE MEDICAL hose issupplied in individual, non-sterile, heat-sealedpolybags and should be sterilized prior to use.

Platinum-cured, braid-reinforced silicone hoseis available; see page 8.

SILBRADE MEDICAL is not recommendedfor implantable or in-body uses or forcontinuous steam applications.

Physical Properties**Hardness, Shore A ±5 – Liner 70Hardness, Shore A ±5 – Cover 60Tensile Strength, psi 1460Elongation at Break, % 320Tear Resistance, Die B, ppi 100Modulus at 100%, psi 415Brittle Temperature, °F -99Maximum Operating Temperature, °F 350




Custom Services■ Cut■ Size

■ Overbraid■ And More

Call for more information800-506-3924

LBS. PER100 FT.

91113172836

WORKINGPSI AT 70°F

208 183 166 141 91 75

ID(IN.)

1/45/163/81/23/41

OD(IN.)

.520 .592 .655 .800 1.100 1.380

PART NO.

291 0334291 0411291 0488291 0565291 0719291 0873

Sold by standard coil length only (25 ft.). Add length suffix to part number when ordering. Example: 25 ft. of 1/4” I.D. hose is part number 291 0334-25.Working pressures are calculated from burst testing using a 3:1 safety factor. Applicationtesting is recommended.BOLD indicates the critical dimension for fittings application.

WALL(IN.)

.135

.140

.140

.150

.175

.190

Medical Tubing


8

AdvantaSil® APSTP l a t i n u m C u r e d S i l i c o n e Tu b i n g

■ Manufactured and packaged in an ISO Class 7 clean room

■ Low volatile grade silicone suitable for pharmaceutical and biopharmapplications

■ Listed by the National Sanitation Foundation for food equipmentmaterials (NSF-51)

■ Particulate testing per USP 788 is performed quarterly

■ Certified free of animal-derived ingredients

■ General temperature range: -100°F (-73.3°C) to 400°F (204.4°C)

■ Resists temperature extremes, compression set, chemical attack,ozone, radiation, moisture and environmental exposure

■ Sterilizable by autoclave or gamma radiation

■ Available with validated sterility assurance of 10-6 via gamma irradiationper ISO 11137 method VDmax 25

■ Documented lot traceable with identification on packaging

■ Documented quality control per ISO 9001:2015

■ Complete validation package available on request

Platinum Cured

Notes

Low-volatile grade, platinum-cured siliconetubing is clean-room produced for criticalpharmaceutical, biopharm, medical, cosmetic andfood applications. AdvantaSil APST hasundergone extensive physical, chemical andbiological testing and meets USP Class VI, FDACFR 177.2600, ISO 10993, and EuropeanPharmacopoeia 3.1.9 standards. AdvantaSil APSTis third-party tested to the highest standards forthe biopharmaceutical industry. Extractables testresults are available on request.

AdvantaSil APST silicone tubing is notintended for implantation, continuous steamapplications or elevated pressure levels.

Values listed are typical for the material used in manufacture except where noted, apply to the hose linerexcept where noted, and are meant only as a guide to aidin design. Field testing should be performed to find theactual values for your application.

www.advantapure.com

AnProduct

continued >

123c Medical Tubing


(IN.)

.030

.063

.063

.078

.094

.094

.125

.125

.125

.156

.156

.188

.188

.188

.250

.250

.250

.313

.313

.313

.313

.375

.375

.375

.500

.500

.500

.625

.625

.750

.750

.8751.0001.0001.000

PRODUCTNO.

APST-0030-0160APST-0063-0125APST-0063-0188APST-0078-0141*APST-0094-0219APST-0094-0281APST-0125-0250APST-0125-0313APST-0125-0375*APST-0156-0281*APST-0156-0406APST-0188-0313APST-0188-0375†APST-0188-0438APST-0250-0375APST-0250-0438APST-0250-0500APST-0313-0375*APST-0313-0438APST-0313-0500APST-0313-0563*APST-0375-0500APST-0375-0563APST-0375-0625APST-0500-0625*APST-0500-0688APST-0500-0750APST-0625-0875APST-0625-1000APST-0750-1000APST-0750-1125*APST-0875-1000APST-1000-1250APST-1000-1375APST-1000-1500*

(MM)

.761.591.591.982.382.383.183.183.183.973.974.764.764.766.356.356.357.947.947.947.949.539.539.53

12.7012.7012.7015.8815.8819.0519.0522.2325.4025.4025.40

ID(IN.)

.160

.125

.188

.141

.219

.281

.250

.313

.375

.281

.406

.313

.375

.438

.375

.438

.500

.375

.438

.500

.563

.500

.563

.625

.625

.688

.750

.8751.0001.0001.1251.0001.2501.3751.500

(MM)

4.063.184.763.585.567.146.357.949.537.14

10.317.949.5311.119.5311.1112.709.5311.1112.7014.3012.7014.3015.8815.8817.4819.0522.2325.4025.4028.5825.4031.7534.9338.10

OD (REF.)(IN.)

.065

.031

.063

.031

.063

.094

.063

.094

.125

.063

.125

.063

.094

.125

.063

.094

.125

.031

.063

.094

.125

.063

.094

.125

.063

.094

.125

.125

.188

.125

.188

.063

.125

.188

.250

(MM)

1.65.79

1.59.79

1.592.381.592.383.181.593.181.592.383.181.592.383.18.79

1.592.383.181.592.383.181.592.383.183.184.763.184.761.593.184.766.35

WALL(PSI)

532233172534232937

33162125131822

111721101616

111211161014

81113

(BAR)

3.71.52.31.21.72.31.62.02.6

2.31.11.41.7.9

1.21.5

.81.21.4.7

1.11.1

.8

.8

.81.1.7

1.0

.6

.8

.9

WORKINGPRESSURE

AT 70°F (21.1°C)

9www.advantapure.com

P l a t i n u m C u r e d S i l i c o n e Tu b i n g

AdvantaSil® APST

AnProduct

Sold by standard coil length only. Add length suffix code to productnumber when ordering—see the Coil Length Legend at right for lengthsuffix codes. Example: 25 ft. of .030 in. I.D. x .160 in. O.D. tubing isproduct number APST-0030-0160P. Non-listed sizes and custom lengths are available by special order. Working pressures are calculated from burst testing using a 3:1 safetyfactor. Application testing is recommended.Coils and spools are supplied double bagged in heat-sealed polybags and bulkpacked. Contact your Sales Representative for other packaging options.*Limited stock availability; lead times and minimums may apply—call for details.†Available in longer lengths on spools—call for details.

Coil Length Legend: P = 25 feet L = 50 feet K = 100 feet

(FT.)

50505050

100100

50, 100, 500 Spool5050

10050505050

50, 10050, 100, 300 Spool

50, 10050, 10025, 50

50, 10050, 10050, 10050, 100

25, 50, 100, 150 Spool5050

50, 10050, 10025, 50

50, 10025, 50

5050

25, 5050

STANDARD AVAILABLELENGTHS

not available

not available

not available

not available

Platinum Cured

123c Medical Tubing

APPLICATIONS• Surgical drains• Drug delivery• Suction and irrigation lines• Dialysis equipment• Fluid handling• Blood analysis

10 www.advantapure.com

AdvantaSil® APSHP l a t i n u m C u r e d B r a i d R e i n f o r c e d S i l i c o n e H o s e


■ Low volatile grade suitable for pharmaceutical and biopharmapplications






■ Sterilizable by autoclave, CIP, SIP and gamma radiation processes




AnProduct

Platinum Cured

Notes

Low volatile grade, platinum-cured siliconehose is clean-room produced for criticalpharmaceutical, biopharm, medical, cosmetic andfood applications. Polyester yarn braiding insidethe wall enhances pressure capabilities.AdvantaSil APSH has undergone extensivephysical, chemical and biological testing andmeets USP Class VI, FDA CFR 177.2600, ISO 10993and European Pharmacopoeia 3.1.9 standards.AdvantaSil APSH is third-party tested to thehighest standards for the biopharmaceuticalindustry. Extractables test results are available onrequest.

AdvantaSil APSH silicone hose is notintended for implantation or continuoussteam applications.


Sold by standard coil length of 50 feet; APSH-P-0625 andAPSH-P-1000 are also available in 25 foot lengths. Add lengthsuffix code to product number when ordering—see the CoilLength Legend at right for length suffix codes. Example: 50 ft. of.250 in. I.D. hose is product number APSH-P-0250L. Non-listedsizes and custom lengths are available by special order. Coils are supplied double bagged in heat-sealed polybags and bulk packed.Contact your Sales Representative for other packaging options.CF = Consult factory

Coil Length Legend: P = 25 feet L = 50 feet

(IN.)

.063

.125

.188

.250

.375

.500

.625

.750

.8751.000

PRODUCTNO.

APSH-P-0063APSH-P-0125APSH-P-0188APSH-P-0250APSH-P-0375APSH-P-0500APSH-P-0625APSH-P-0750APSH-P-0875APSH-P-1000

(MM)

1.593.184.766.359.53

12.7015.8819.0522.2325.40

NOMINAL ID(IN.)

.282

.375

.462

.500

.625

.875

.9901.1251.2601.405

(MM)

7.169.5311.7312.7015.8822.2325.1528.5832.0035.69

OD(IN.)

.105

.120

.130

.125

.125

.187

.170

.175

.180

.190

(MM)

2.673.053.303.173.174.754.324.454.574.83

WALL(IN.)

CFCFCF1133456

(MM)

CFCFCF

25.425.476.276.2

101.6127.0152.4

MINIMUMBEND RADIUS

PRESSURE RATINGS & WEIGHTS

PRODUCTNO.

APSH-P-0063APSH-P-0125APSH-P-0188APSH-P-0250APSH-P-0375APSH-P-0500APSH-P-0625APSH-P-0750APSH-P-0875APSH-P-1000

(PSI)

200175170140140105100906560

(BAR)

13.7012.0711.729.659.657.246.906.214.484.14

WORKINGPRESSURE

AT 70°F (21.1°C)(PSI)

775700650550550420400350250225

(BAR)

53.4448.2744.8237.9237.9228.9627.5824.1317.2415.51

BURSTPRESSURE

AT 70°F (21.1°C)(LB.)

.031

.051

.073

.077

.102

.211

.241

.287

.336

.401

(KG)

.046

.076

.109

.115

.152

.314

.359

.427

.500

.597

WEIGHTPER

FOOT / METER

123c Medical Tubing



■ Platinum cured for purity

■ Allows for processing at higher flow rates

■ Handles working pressures up to 59 psi non-treated, 70 psi forgamma irradiated

■ Full vacuum capabilities on most sizes

■ Flexible and translucent yet durable

■ Eliminates particulate shedding that can occur when cuttingbraid reinforced hose




■ Sterilizable by autoclave or gamma irradiation

■ Available with validated sterility assurance of 10-6 via gammairradiation per ISO 11137 method VDmax 25




11

H i g h P r e s s u r e U n r e i n f o r c e d S i l i c o n e Tu b i n g

AdvantaSil® APHPPlatinum Cured

www.advantapure.com

AnProduct

NotesPlatinum-cured AdvantaSil High Pressure

silicone tubing – APHP – is a high quality, costeffective solution designed for increased flowrates to reduce processing time. The tubing’sunreinforced characteristic allows for limitedpumpability up to 30 psi back pressure andmakes it easier to see your process fluids.

AdvantaSil APHP has undergone extensivephysical, chemical and biological testing andmeets USP Class VI, FDA CFR 177.2600, ISO 10993,European Pharmacopoeia 3.1.9 and otherstandards. AdvantaSil APHP is third-party testedto the highest standards for the biopharma-ceutical industry. Extractables test results areavailable on request.

AdvantaSil APHP tubing requires propercutting techniques for optimal performance. Seethe instruction video athttp://www.advantapure.com/high-pressure-silicone-tubing.htm.

AdvantaSil APHP high pressure siliconetubing is not intended for implantation orcontinuous steam applications.


(IN.)

.125

.250

.375

.500

.7501.000

PRODUCTNO.

APHP-0125-0250APHP-0250-0375APHP-0375-0625APHP-0500-0750APHP-0750-1000APHP-1000-1375

Sold by standard coil length of 50 ft. Add length suffix code ”L” to product number whenordering. Example: 50 ft. of .250 in. I.D. x .375 in. O.D. tubing is product number APHP-0250-0375L.Vacuum capability (in./Hg) for all sizes; >29.5 Non-listed sizes and custom lengths are available by special order. Coils are supplied double bagged in heat-sealed polybags and bulk packed. Contact your Sales Representative regarding any special product or packaging needs.Recommended working pressures are calculated from burst testing using a 3:1 safetyfactor. Testing was performed at ambient temperature. Application testing is recommended. CF = Consult factory

(MM)

3.186.359.52

12.7019.0525.40

NOMINAL ID(IN.)

.250

.375

.625

.7501.0001.375

(MM)

6.359.52

15.8819.0525.4034.93

OD(IN.)

.063

.063

.125

.125

.125

.188

(MM)

1.601.603.183.183.184.77

WALL(IN.)

.3751

1.21.82.14.1

(MM)

9.525304653

104

BEND RADIUS

(PSI)

CF125177140109115

PRODUCTNO.

APHP-0125-0250APHP-0250-0375APHP-0375-0625APHP-0500-0750APHP-0750-1000APHP-1000-1375

(BAR)

CF8.6

12.29.77.57.9

BURSTPRESSURE

NON-TREATED(PSI)

CF4259473638

(BAR)

CF2.94.13.22.52.6

RECOMMENDEDWORKING

PRESSUREBASED ON 3:1

SAFETY FACTORNON-TREATED

(PSI)

CF144211157123131

(BAR)

CF9.9

14.510.88.59

BURSTPRESSURE

GAMMAIRRADIATED

45 kGy(PSI)

CF4870524144

(BAR)

CF3.34.83.62.83

RECOMMENDEDWORKING

PRESSUREBASED ON 3:1

SAFETY FACTORGAMMA IRRADIATED

45 kGy

PRESSURE RATINGS

APPLICATIONS• High volume fluid transfer• Suction and irrigation lines• Surgical drains• Single-Use• Inline integrity testing of filtration assemblies

123c Medical Tubing

Made in U.S.A.Made with

Solar Power


AdvantaSil® APSPGP u m p G r a d e S i l i c o n e Tu b i n g



■ Special formulation promotes extended life in pumps

■ Outstanding compression characteristics – snaps back to original form

■ Smooth surfaces offer uniform fluid flow and resistance to bacteriabuild-up

■ AdvantaSil APSPG tubing is USP Class VI approved

■ Material meets FDA 21 CFR 177.2600

■ Low volatile grade suitable for pharmaceutical and biopharm uses

■ Translucent for visual contact with the flow


■ Maximum operating temperature: 400°F (204.4°C); brittle temperature: less than -100°F (-73.3°C)

■ Sterilizable/autoclavable




AnProduct

Platinum Cured

Notes

Class VI, platinum-cured silicone elastomercomprises AdvantaSil APSPG pump grade tubing.Engineered for pharmaceutical, biotech, andlaboratory environments, AdvantaSil APSPG isspecially formulated to withstand repeatedcompression and release for consistent,dependable performance – far outlasts standardsilicone tubing. The tubing has undergoneextensive physical, chemical, and biologicaltesting, and meets USP Class VI, FDA CFR177.2600, ISO 10993 and EuropeanPharmacopoeia 3.1.9 standards. AdvantaSilAPSPG is undergoing third-party testing to thehighest standards for the biopharmaceuticalindustry.

AdvantaSil APSPG pump grade siliconetubing is not intended for implantation,continuous steam applications or elevatedpressure levels.


Sold by standard coil length only. Add length suffix code toproduct number when ordering—see the Coil Length Legend atright for length suffix codes. Example: 25 ft. of .031 in. I.D. x.156 in. O.D. tubing is product number APSPG-0031-0156P.Non-listed sizes and custom lengths are available by specialorder. Coils are supplied double bagged in heat-sealed polybags and bulk packed.Contact your Sales Representative for other packaging options.

Coil Length Legend: P = 25 feet L = 50 feet

(IN.)

.031

.063

.125

.188

.250

.250

.250

.313

.375

.375

.500

PRODUCTNO.

APSPG-0031-0156APSPG-0063-0188APSPG-0125-0250APSPG-0188-0313APSPG-0250-0375APSPG-0250-0438APSPG-0250-0500APSPG-0313-0500APSPG-0375-0563APSPG-0375-0625APSPG-0500-0750

(MM)

.791.593.184.766.356.356.357.949.529.52

12.70

ID(IN.)

.156

.188

.250

.313

.375

.438

.500

.500

.563

.625

.750

(MM)

3.974.766.357.949.5211.1112.7012.7014.2915.8819.05

OD(IN.)

.063

.063

.063

.063

.063

.094

.125

.094

.094

.125

.125

(MM)

1.591.591.591.591.592.383.182.382.383.183.18

WALL

2525505050505050505050

STANDARDLENGTH (FT.)

123c Medical Tubing

APPLICATIONS• Peristaltic pumps• Surgical drains• Drug delivery• Suction and irrigation lines• Dialysis• Fluid handling• Blood analysis


■ Sterile weldable and heat sealable

■ Made from FDA-approved ingredients

■ Certified free of silicone oils and animal-derived ingredients

■ Sterilizable by autoclave or gamma radiation

■ Available with validated sterility assurance of 10-6 via gammairradiation per ISO 11137 method VDmax 25

■ Meets various ISO and USP standards, including Class VI

■ Meets European Pharmacopoeia 3.2.2.1 standards

■ REACH, RoHS and California Proposition 65 compliant

■ Excellent low absorption and adsorption characteristics ascompared to silicone

■ Low permeability as compared to silicone

■ Smooth interior for excellent flow and performance

■ Translucent for fluid flow visibility

■ Excellent tubing component for Single-Use systems

■ Sizes from 1/8” (.125) through 1” (1.000) I.D.

■ Custom sizes, lengths and packaging available

■ Supplied double bagged; sealed in polybags at manufacturefor cleanliness



■ Single resin validation — no need to graft to other tubingmaterials like silicone for media filling and sampling thatinvolves peristaltic pumps; helps eliminate operator errors

■ Extractables test portfolio available upon request

13www.advantapure.com

B i o p h a r m a c e u t i c a l G r a d e T P E Tu b i n g

AdvantaFlex®

AnProduct

NotesADVANTAFLEX TPE (thermoplastic elastomer)

tubing addresses the need for a flexible,translucent, sterilizable, moldable, heat sealable,and weldable biopharmaceutical tubing for fluidprocessing. ADVANTAFLEX maintains its physicalproperties following sterilization processes,resists kinking, remains translucent for visibleproduct flow, and does not become gummy.

ADVANTAFLEX is third-party tested to thehighest standards for the biopharmaceuticalindustry. Extractables test results are available onrequest.

Physical Properties**Specific Gravity .89Hardness, Shore A ±5 65Ultimate Tensile Strength, psi 1000Ultimate Elongation, % 550Tensile Modulus at 100%, psi 410Tear Strength, Die B, ppi 240Compression Set, % per ASTM D-395B 25Maximum Operating Temperature, °F 275Brittle Temperature, °F -88


continued >

APPLICATIONS• Aseptic transfer of fluids• Sterile filling of vials and syringes• Filling and production of media• Drug delivery• Sterile filling • Pharmaceutical sampling and delivery systems • Single-Use systems• High purity water transfer • Filtration

123c Medical Tubing



AdvantaFlex®

B i o p h a r m a c e u t i c a l G r a d e T P E Tu b i n g

(IN.)

.125

.188

.188

.250

.250

.250

.313

.313

.375

.375

.375

.500

.625

.750

.7501.000

PRODUCTNO.

APAF-BP-0125-0250APAF-BP-0188-0313APAF-BP-0188-0375APAF-BP-0250-0375APAF-BP-0250-0438APAF-BP-0250-0500APAF-BP-0313-0438APAF-BP-0313-0500APAF-BP-0375-0500APAF-BP-0375-0563APAF-BP-0375-0625APAF-BP-0500-0750APAF-BP-0625-0875APAF-BP-0750-1000APAF-BP-0750-1125APAF-BP-1000-1375

(MM)

3.184.764.766.356.356.357.947.949.529.529.52

12.7015.8819.0519.0525.40

ID(IN.)

.250

.313

.375

.375

.438

.500

.438

.500

.500

.563

.625

.750

.8751.0001.1251.375

(MM)

6.357.949.529.5211.1112.7011.1112.7012.7014.3015.8819.0522.2325.4028.5834.93

OD(IN.)

.062

.062

.094

.063

.094

.125

.062

.094

.062

.094

.125

.125

.125

.125

.188

.188

(MM)

1.571.572.381.592.383.181.572.381.572.393.183.183.183.184.764.76

WALL (REF.)(PSI)

30233220233021241823242218171818

(BAR)

2.11.62.21.41.62.11.41.61.31.61.61.51.31.21.31.3

WORKINGPRESSURE

AT 70°F (21.1°C)

AnProduct

AdvantaFlex Provides Superior Weld Strength

Up to 40% stronger than C-Flex® 374

Increase your process security by reducingthe risk of failure at the weld. AdvantaFlexwelds hold stronger than C-Flex® 374 welds,providing a secure, sterile boundary toprotect your investment.

To see detailed test results and view thetensile and burst test videos, visitwww.advantapure.com/advantaflex.htm

C-Flex® is a registered trademark of Saint-Gobain Performance Plastics and is not endorsed,sponsored, affiliated or associated with NewAge® Industries, Inc.

Sold by standard coil length only. Add length suffix code to productnumber when ordering—see the Coil Length Legend at right for lengthsuffix codes. Example: a 50 foot coil of .125 inch I.D. x .250 inch O.D.tubing is product number APAF-BP-0125-0250L. Add length and “S” todenote “spool” for products with lengths available on spools. Example:a 500 foot spool of .125 inch I.D. x .250 inch O.D. tubing is productnumber APAF-BP-0125-0250-500S. Working pressures are calculated from burst testing using a 3:1 safety factor. Coils and spools are supplied double bagged in heat-sealed polybags and bulkpacked. Contact your Sales Representative for other packaging options.

Coil Length Legend: P = 25 feet L = 50 feet K = 100 feet

(FT.)

50, 10050, 10050, 10050, 10050, 100

5050, 100

50100

550, 10050, 100

5050, 100

10025

STANDARDLENGTHSCOILED

(FT.)

500---

300-

300---

150100

-75--

STANDARDLENGTHS

ON SPOOLS

123c Medical Tubing

15

■ Available in Ester or Ether formulations

■ Both formulations made from non-toxic raw materialsconforming to FDA standards for use with wet and fatty foodcontact surfaces

■ Extremely resistant to weathering†, tearing, impact, radiation,and abrasion

■ Transparent, flexible, resilient, tough; resistant to oils, greases, and fuels††

■ Wide range of temperature resistance: -85°F to 185°F (ester)

■ Ether-based raw material is listed by the National SanitationFoundation (NSF 61) for use with potable water

■ Ester-based raw material is free of animal derived componentsand REACH compliant

■ Free of DEHP, phthalates, BPA and conflict minerals

■ RoHS compliant

■ Can be heat sealed, coiled, fabricated, or bonded

Tr a n s p a r e n t P o l y u r e t h a n e Tu b i n g

Superthane®

continued > www.newageindustries.com

Notes

†Hydrolytic Stability — For resistance tomoisture and fungi, SUPERTHANE ether isrecommended. (Ester polyurethane does not reactwell with water, prolonged humid conditions, orattack from fungi.) The raw material used in itsmanufacture is listed by the National SanitationFoundation (NSF 61).

SUPERTHANE is much more resistant topressure and vacuum applications thancorresponding sizes of PVC or rubber.

††Although polyurethane is commonly usedin fuel applications, due to additives in today’sgasoline and petroleum products, field testingshould be performed.

Custom coiled polyurethane is available —call for details.

For easy identification, SUPERTHANE isimprinted with the trademarked name.


ESTER ETHERHardness, Shore A ±5 85 85Tensile Strength, psi 6100 7500Elongation at Break, % 490 500Brittle Temperature, °F -85 -85Maximum Operating Temp., °F 185 175

**Values listed are typical for the material used inmanufacture, except where noted, and are meant only asa guide to aid in design. Field testing should beperformed to find the actual values for your application.


■ Thermobarb® barbed fittings ■ Cam operated couplings ■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond hose clamps ■ Worm gear clamps


■ Color■ Overbraid

■ Hot Bond®

■ Heat-Form■ Hardness■ And More


123c Medical Tubing

APPLICATIONS• Pneumatic control systems for needle dispensing and catheters/balloons• Compression devices• DVT and respiratory systems


Ester

Superthane®

Tr a n s p a r e n t P o l y u r e t h a n e Tu b i n g

LBS. PER100 FT.ESTER

.48 .79 .79 1.92 1.37 1.13 2.55 1.42 3.19 7.66 3.83 6.24 8.93 4.47

7.16 10.22 11.48 5.75 12.77 10.98 15.33 17.88 20.43 22.99

WORKINGPSI AT

70°F

135 135 72 72 130 70 27 74 CF 33 67 131 65 75 118 59 59 84 100 80 36 36 48 60 40 54 60 43 51 33 40 40 31 22

ID(IN.)

.063

.063

.125

.125

.125

.170

.188

.188

.188

.250

.250

.250

.313

.313

.313

.375

.375

.375

.375

.438

.500

.500

.500

.500

.625

.625

.625

.750

.750

.8751.0001.0001.5002.000

OD(IN.)

.125

.125

.188

.188

.250

.250

.250

.313

.438

.313

.375

.500

.438

.500

.563

.500

.500

.563

.625

.688

.625

.625

.688

.750

.750

.813

.875

.9381.0001.1251.2501.2501.7502.250

WALL(IN.)

.031

.031

.031

.031

.063

.040

.031

.063

.125

.031

.063

.125

.063

.094

.125

.063

.063

.094

.125

.125

.063

.063

.094

.125

.063

.094

.125

.094

.125

.125

.125

.125

.125

.125

STANDARDLENGTH

(FT.)

100500100

1000100, 1500

500100

100, 1000100100

100, 100010010010010010050010010010050

100100

50, 100100100100100

50, 10010050

10010050

PART NO.ESTER

200 0075

200 0152200 0152200 0229200 0383200 0460200 0537*

200 0768200 0845200 0999200 1076200 1153200 1230200 1307

200 1384200 1461200 1615

200 1692

200 1846

200 2000200 2077

200 2231200 2385

200 2539

PART NO.ETHER

210 0070210 0070210 0147

210 0224

210 0455210 0462210 0609210 0686210 0840210 0917

210 1148210 1148210 1225210 1302

210 1533210 1533210 1610210 1687210 1764210 1841210 1918210 1995210 2072210 2226210 2380210 2380210 2534210 2688

Add length suffix to part number when ordering. Example: 100 ft. of .125” I.D. x .188” O.D. ester tubing is part number 200 0152-100.Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.Cut coils are available from coils of 100 ft. or less; charges apply — call for details. Coils over 100 ft. are sold by standard coillength only. Due to the coil diameter, some larger sizes must ship via truck.Tolerances: ID & OD ±3% but not less than ±.005".BOLD indicates the critical dimension for fittings application.CF = Consult factory*Limited stock availability; lead times and minimums may apply — call for details.

LBS. PER100 FT.ETHER

.45 .45 .74

1.77 2.38 5.97 1.33 2.98 7.15 3.57 4.17 4.17 6.68 9.54

5.36 5.36 8.47 11.92 6.56 10.25 14.30 12.03 16.69 19.07 21.46 21.46 30.99 40.53


123c Medical Tubing

Tr a n s p a r e n t B r a i d R e i n f o r c e d P o l y u r e t h a n e H o s e

Urebrade®


■ Open mesh polyester braiding incorporated within the wall offlexible, ether-based polyurethane

■ Made from non-toxic raw ingredients conforming to FDAstandards

■ Raw materials are listed by the National Sanitation Foundation(NSF 61) for use with potable water

■ Offers much greater pressure capability than unreinforcedpolyurethane tubing

■ Resistant to weathering†, tearing, impact, abrasion, radiation exposure, oils, greases, and fuels††

■ Wide range of temperature resistance; -90°F to 175°F

■ Free of DEHP, phthalates, BPA and conflict minerals

■ RoHS compliant■ Naturally transparent for visual contact with the flow

Notes

†Hydrolytic Stability — UREBRADE is suppliedin an ether formulation, making it resistant toattack from moisture and fungi. The raw materialsused in UREBRADE are listed by the NationalSanitation Foundation (NSF 61).

Where applications involve repeated flexing,heavy vibration, or abrasion, UREBRADE offerssuperior service life over other materials.

Ester-based UREBRADE is available throughminimum order — call for details.

††Due to additives in today’s gasoline andpetroleum products, field testing should beperformed.

For easy identification, transparent UREBRADEis imprinted with the trademarked name.


Hardness, Shore A ±5 85Tensile Strength, psi 5500Elongation at Break, % 580Brittle Temperature, °F -90Max. Operating Temperature, °F 175

**Values listed are typical for the material used inmanufacture, except where noted, and are meant only as aguide to aid in design. Field testing should beperformed to find the actual values for your application.





■ Hot Bond®

■ Heat-Form ■ And More


123c Medical Tubing

APPLICATIONS• Pneumatic control systems for needle dispensing and catheters/balloons• Compression devices• DVT and respiratory systems

LBS. PER100 FT.

6.04 9.78 11.92 16.34 18.62 26.32 51.94 56.26 85.82

WORKINGPSI AT

70°F 250 190 150 130 100 80 75 50 40

ID(IN.)

.250

.375

.500

.625

.7501.0001.2501.5002.000

OD(IN.)

.470

.630

.750

.9051.0251.3001.7101.9302.500

WALL(IN.)

.110

.127

.125

.140

.137

.150

.230

.215

.250

PART NO.

220 0072*220 0149*220 0226*220 0303220 0380220 0457*220 0534220 0611*220 0688

BENDRADIUS

(IN.).750.750

1.5002.0003.0003.5004.0005.5007.500

STANDARDLENGTH

(FT.)50, 10050, 100

25, 50, 100100

50, 10025, 50, 100

50, 10050, 100

100Add length suffix to part number when ordering. Example: 100 ft. of .250” I.D. x .470” O.D.hose is part number 220 0072-100. Working pressures are calculated from burst testing using a 4:1 safety factor. Applicationtesting is recommended.Cut coils available; charges apply — call for details.Due to the coil diameter, some larger sizes must ship via truck.BOLD indicates the critical dimension for fittings application.*Limited stock availability; lead times and minimums may apply — call for details.


■ Phthalate, DEHP and BPA free

■ Raw materials meet California Proposition 65


■ Made from non-toxic ingredients conforming to FDA standards


■ Glass-like clarity lets users see fluid flow

■ Mirror-smooth surfaces provide outstanding flow characteristics

■ Lightweight yet tough and abrasion resistant

■ As flexible as rubber

■ Handles a wide variety of chemicals, gases, and liquids

■ Raw material meets UL94 HB burn rating

■ REACH and RoHS compliant

■ Replaces original Clearflo tubing with 68 Shore A hardness

Clearflo® 70C l e a r , P h t h a l a t e F r e e P V C Tu b i n g

18

Notes

CLEARFLO 70 is generally unaffected by mostoxidizing and reducing agents. Diluted acids andalkalies have little effect, though if highlyconcentrated they tend to make the tubing lesspliable. If chemical resistance is of major concern,in-plant tests are suggested.

In clean applications, CLEARFLO 70’s smoothsurface prevents lodging of bacteria andsediment buildup. It is easily drained and flushedclean with most available cleaning and sanitizingagents.


Hardness, Shore A ±3 70Tensile Strength, psi 2000Elongation at Break, % 400Brittle Temperature, °F -41Maximum Operating Temp., °F 175



■ Cam operated couplings ■ Thermobarb® barbed fittings ■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond hose clamps ■ Worm gear clamps



■ Hot Bond®

■ Heat-Form■ Hardness■ And More


NEW Clearflo 70 phthalate-free PVC tubing was developed in response to customers’ interest in fluid transfer products that do not contain leachable

phthalates, DEHP (Di-2-ethylhexyl phthalate) or BPA (bisphenol A).Clearflo 70 is an ideal tubing solution for the transfer of fluids, gasesand air in the medical device and health care markets and for brewingand other beverage applications.


123c Medical Tubing

APPLICATIONS• Aspiration/suction• Peristaltic pumps• Surgical drains• Catheters• Fluid handling• Air and gas supply

continued >


C l e a r , P h t h a l a t e F r e e P V C Tu b i n g

Clearflo® 70

19

ID(IN.)

1/163/321/81/8

5/325/323/163/163/163/161/41/41/4

5/165/165/163/83/83/83/8

7/167/161/21/21/21/2

9/165/85/85/85/83/43/43/43/43/47/8111

1-1/41-1/41-1/41-1/21-1/21-1/21-3/41-3/4

22

2-1/42-1/2

34

OD(IN.)

1/85/323/161/4

7/3211/321/4

5/163/8

7/163/8

7/161/2

7/161/2

9/161/2

9/165/83/4

9/1611/165/8

11/163/41

3/43/4

13/167/8

15/167/81

1-1/161-1/81-1/41-1/81-1/41-3/81-1/21-1/21-5/81-3/41-3/41-7/8

22

2-1/42-1/42-1/22-3/4

33-1/24-3/4

STANDARDLENGTH (FT.)

500500500

100, 500500100100

100, 500100100

50, 100, 500100100

100, 500100100

100, 500100

50, 100100100100

100, 500100

50, 100100100100100

100, 300100100

50, 100, 300100100100100

50, 100100100

50, 10050, 100

5050, 100

25, 50, 1005050505050505050

25, 50

WALL(IN.)

1/321/321/321/161/323/321/321/163/321/8

1/163/321/8

1/163/321/8

1/163/321/8

3/161/161/8

1/163/321/81/4

3/321/163/321/8

5/321/161/8

5/323/161/41/81/8

3/161/41/8

3/161/41/8

3/161/41/81/41/81/41/41/41/43/8

WORKINGPSI AT 70°F

14010585

14171

15953

106141169851161417197

12170901111415394526785

141603955718533617385

106534267853977713347612853254767333336

LBS. PER100 FT.

.47 .62 .79 1.9 .95 3.8 1.1 2.5 4.2 6.3 3.1 5.2 7.5 3.8 6.1 8.8 4.4 7.1 10.0 17.0 5.0 11.3 5.7 9.0 12.6 30.1 9.9 6.9 10.9 15.1 19.7 8.2 17.6 22.8 28.3 40.2 20.1 22.6 35.8 50.2 27.6 43.3 60.3 32.7 50.9 70.3 37.7 80.4 42.7 90.4100.5110.5130.6263.7

PART NO.

113 0008113 0029113 0050113 0071113 0092113 0113113 0134113 0155113 0183113 0204113 0225113 0253113 0281113 0302*113 0323113 0344113 0365113 0386113 0407113 0428113 0449113 0477113 0498113 0519113 0547113 0575113 0596113 0624113 0645113 0666113 0687113 0708113 0729113 0750113 0771113 0792113 0813113 0834113 0862113 0883113 0911113 0932113 0953113 0974113 0995113 1037113 1058113 1079113 1100113 1121113 1142*113 1163*113 1184*113 1205*

Add length suffix to part number when ordering. Example: 100 ft. of 1” I.D. x 1-1/4” O.D. tubing is part number113 0834-100. Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.Cut coils are available from coils of 100 ft. or less; charges apply — call for details. C oils over 100 ft. are sold bystandard coil length only.BOLD indicates the critical dimension for fittings application.*Limited stock availability; lead times and minimums may apply — call for details.


123c Medical Tubing

■ Made from non-toxic ingredients conforming to FDA standards

■ Free of phthalates, latex and animal-derived ingredients

■ Listed by the National Sanitation Foundation (NSF-51) for foodequipment materials

■ Antimicrobial ingredient is throughout the tubing, not only on aninside liner as with other products

■ Transparent for visual flow contact

■ Contains antimicrobial technology to guard against bacteria such asE. coli, listeria, salmonella, legionella, MRSA, campylobacter andpseudomonas

■ Well suited for food and beverage applications including non-fattyaqueous, milk and alcoholic beverages (up to 20% ABV)

■ Heat sealable

■ REACH and RoHS compliant


Clearflo® Ag-47 C l e a r A n t i m i c r o b i a l P h t h a l a t e - F r e e Tu b i n g

NotesCLEARFLO Ag-47 is suitable for a wide variety

of food contact applications and designed toprotect your food or beverage product fromharmful bacteria. It’s manufactured from a clearflexible Shore A74 phthalate-free compound withthe addition of antimicrobial protection. Theantimicrobial technology is especially effectivewhere there is infrequent use of fluids in warm orhumid conditions and the tubing has noopportunity to dry thoroughly between uses.

The antimicrobial properties protect thetubing against organisms that can cause growth-based discoloration and odors. Testing hasproven that the active ingredients neutralizebacteria rapidly, and because the ingredients donot dissipate with use, they can be expected tooffer protection for an extended time undernormal conditions. CLEARFLO Ag-47 offersantibacterial performance to ISO 22196:2011.

Unlike some products CLEARFLO Ag-47 is100% protected with the effective additive, whichis present throughout the tube and not only onthe liner, for protection on all surfaces. This isimportant in applications where the tubing issubmerged or dipped into fluid or if any surfaceof the tubing is cut or becomes compromised.Also, tubing products that only offer a liner layerof antimicrobial protection risk the linerbecoming separated from the cover. If theantimicrobial layer is cut, the tubing under thatcut becomes susceptible to bacteria growth. Thiscan often happen at the fitting.

123c Medical Tubing


■ Thermobarb® plastic barbed fittings ■ Stainless steel barbed fittings ■ Oetiker® ear type clamps ■ Kwik Clamp™ nylon double bond

hose clamps ■ Worm gear clamps


Hardness, Shore A ±5 74Operating Temperature Range, °F -40 to 125Operating Temperature Range, °C -40 to 52

**Values listed are typical for the material used inmanufacture, except where noted, and are meant onlyas a guide to aid in design. Field testing should be per-formed to find the actual values for your application.

ID(IN.)

1/81/8

3/163/161/41/4

5/165/163/83/81/21/25/85/83/43/41

OD(IN.)

1/43/8

5/167/163/81/2

7/169/161/25/85/83/43/47/87/81

1-1/4

WALL(IN.)

1/161/8

1/161/8

1/161/8

1/161/8

1/161/8

1/161/8

1/161/8

1/161/81/8

WORKINGPSI AT 70°F16024212019097

16080

13768

12053934377376750

LBS.PER

100 FT.1.955.192.596.483.257.793.899.084.55

10.385.85

12.987.14

15.588.44

18.1723.37

PART NO.

11900141190021119003511900491190112119012611901891190203119026611902801190343119035711903921190399119044811904551190497

BENDRADIUS

(IN.).5118.5512.7874.7874

1.1417.9843

1.53541.25981.96851.57483.11022.24414.48823.14966.10243.9370

10.0394Standard coil length is 100 ft. Add length suffix to part number when ordering.Example: 100 ft. of 3/16” I.D. x 5/16” O.D. tubing is part number 119 0035-100. Sold by standard coil length only.BOLD indicates the critical dimension for fittings application.

C l e a r , P h t h a l a t e - F r e e , B r a i d R e i n f o r c e d P V C H o s e

Nylobrade®

21

■ Open mesh polyester braiding permanently encapsulated inwalls of clear, flexible PVC tubing

■ Phthalate, DEHP and BPA free

■ Raw materials meet California Proposition 65

■ Listed by the National Sanitation Foundation for food equipment materials (NSF-51) and potable water (NSF-61)

■ Non-toxic raw materials conform to USP Class VI and FDAstandards

■ Offers much greater pressure capabilities than unreinforcedPVC tubing

■ Mirror smooth interior permits outstanding flow characteristics

■ Crystal clear for full visual flow*

■ Corrosion and abrasion resistant with flexibility similar to rubberbut with much longer life

■ REACH and RoHS compliant NotesNYLOBRADE is made from non-toxic raw

materials that conform to Food and DrugAdministration (FDA) standards for use infood contact applications. Its NSF listingmakes NYLOBRADE a good choice fordrinking water applications, those involvingwater at temperatures up to 60°C (140°F),and food processing applications.

NYLOBRADE is generally unaffected bymost oxidizing and reducing agents. Dilutedacids and alkalies have little effect, though ifhighly concentrated tend to make the hoseless pliable. If chemical resistance is inquestion, in-plant tests are suggested.

Gasoline and oils will harden PVC overperiods of intermit tent use. In theseapplications, continuous use will slow thehardening process.

*NYLOBRADE HP (High Pressure) sizes3/8” I.D. and up have a tighter braid patternand therefore reduce the visual flow contactand increase the hose’s resistance tobending and flexing. Heavier walls on similarI.D.s will be more resistant to kinking.

Physical Properties**Hardness, Shore A ±5 80Tensile Strength, psi 2500Elongation at Break, % 300Brittle Temperature, °F -50Maximum Operating Temperature, °F 175Maximum Operating Temp. for NSF, °F 140


CALCU-LATED

LBS. PER100 FT.

3.005.065.356.037.907.778.029.26

10.5010.7311.8220.0018.1720.5330.0029.0337.8060.7060.7062.1265.5095.0295.02

STANDARDLENGTH(FT.)††

100100, 300, 500100100100100100100, 50050, 100, 300100100, 300, 500100100, 300100, 300, 500100100100100100100100100100

ID(IN.)

1/83/161/41/41/4

5/163/83/83/81/21/21/25/83/43/411

1-1/41-1/41-1/21-1/2

22

OD(IN.)

.315

.394

.43529/64

1/217/32.575.6005/8

.710

.728

.85029/321.0241-1/81.2991-3/81.7321.7321.9291.9502-1/22-1/2

PART NO.

100 0076100 0230*103 0309100 0307102 0061100 0461103 0540100 0538102 0075103 0694100 0692102 0096100 0846100 0923102 0117100 1154102 0005100 1308102 0012100 1385102 0019100 1462102 0026

WALLTYPE†

Std.Std.ThinStd.HPStd.ThinStd.HP

ThinStd.HPStd.Std.HPStd.HPStd.HPStd.HPStd.HP

†Std. = standard; HP = high pressure.††Add length suffix to part number when ordering. Example: 100 ft. of 1/8" I.D. x .315" O.D. hose ispart number 100 0076-100. Working pressures are calculated from burst testing using a 3:1 safetyfactor. Application testing is recommended.BOLD indicates the critical dimension for fittings application.*Limited stock availability; lead times and minimums may apply — call for details.

WORKINGPSI

AT 70°F465315316300400280215230265191215258200150233130185110150

709050

133

WALL(IN.)

.095

.103

.093

.1021/8

3/32.100.1131/8

.105

.114

.1759/64.1373/16.1503/16.241.241.215.2251/41/4



123c Medical Tubing

APPLICATIONS• Aspiration/suction• Surgical drains• Fluid handling• Air and gas supply


Custom Services■ Overbraid■ Hot Bond■ Heat-Form■ Hardness

■ Cut■ Size■ Color■ More

Call for more information800-506-3924

Newflex®

S p i r a l R e i n f o r c e d P V C S u c t i o n H o s e

22

■ 100% PVC construction

■ Spiral reinforcement made from rigid PVC to resist impact, crushing andkinking

■ Lighter than ply-wrapped rubber and other similar hoses

■ Made from non-toxic ingredients conforming to FDA and 3-A standards

■ Smooth interior produces low friction losspermitting maximum flow

Made in U.S.A.


NEWFLEX VFH – Light Duty – Clear with White Helix, Convoluted O.D.

NEWFLEX FH – Standard Duty – Clear, Convoluted O.D.LBS. PER

100 FT.19293440505577

102164

WORKINGPSI AT 70°F605050454540403535

ID(IN.)

11-1/41-1/21-3/4

22-1/42-1/2

34

OD(IN.)

1-1/41-5/8

1-13/162-3/322-3/82-5/8

2-15/163-7/164-9/16

PART NO.

120 0101 120 0178 120 0255 120 0332 120 0409 120 0486* 120 0563* 120 0640* 120 0717*

BEND RADIUS

(IN.) 2 3 3 4 4 5 6 8 10

This series has no positive pressure ratings. Increasing pressure will cause the hose to elongate andexpand. If pressure is a concern, in-plant testing is advised. Standard coil length is 100 ft. Add lengthsuffix to part number when ordering. Example: 100 ft. of 3/8” I.D. x .570” O.D. hose is part number 124 0176-100. Cut coils are available; charges apply — call for details.BOLD indicates the critical dimension for fittings application.*Limited stock item; lead times and minimums may apply — call for details.

NEWFLEX FHS – Heavy Duty – Clear, Smooth O.D.ID

(IN.)

3/41

1-1/41-1/2

22-1/2

34

OD(IN.)

15/161-1/41-1/2

1-13/162-3/82-7/8

3-7/164-1/2

WORKING PSI AT 70°F

105 100 95 85 80 75 65 50

LBS. PER

100 FT.202730406085

115175

ID(IN.)

3/81/25/83/41

1-1/41-1/2

2

LBS. PER100 FT.

568

1014152034

PART NO. 124 0176 124 0253 124 0330 124 0407 124 0484 124 0561 124 0638 124 0715*

OD(IN.).570.700.830.9651-1/41-1/2

1-13/162-3/8

VAC. RATE(IN./Hg.)

2424242424222018

BEND RADIUS (IN.)

1/21/25/83/41122

VAC.RATE

(IN./Hg.)2828282828282828

BEND RADIUS

(IN.) 3 3 3 4 5 7 8 10

VAC.RATE

(IN./Hg.)282828282828282828

Standard coil length is 100 ft. Add length suffix to part number when ordering. Example: 100 ft. of1-1/4” I.D. x 1-5/8” O.D. hose is part number 120 0178-100. Cut coils available; charges apply — call for details. Working pressures are calculated from burst testing using a 3:1 safety factor.Application testing is recommended. BOLD indicates the critical dimension for fittings application.*Limited stock item; lead times and minimums may apply — call for details.

PART NO.

121 0181 121 0258 121 0335 121 0412 121 0489 121 0566* 121 0643* 121 0797*Standard coil length is 100 ft. Add length suffix to part number when ordering. Example: 100 ft. of 3/4”I.D. x 15/16” O.D. hose is part number 121 0181-100. Cut coils available; charges apply — call fordetails. Working pressures are calculated from burst testing using a 3:1 safety factor. Applicationtesting is recommended. BOLD indicates the critical dimension for fittings application.*Limited stock item; lead times and minimums may apply — call for details.

123c Medical Tubing

Heavy Duty NEWFLEX FHS is also available in an industrial grade.



NotesNEWFLEX reinforced suction hose is used for

both positive and negative pressure applications.Its advanced design allows the use of light-weight,corrosion-resistant PVC to replace bulkier andheavier ply-wrapped rubber hose.

NEWFLEX series ‘FH’ and ‘FHS’ are clear,allowing the user to have full visual contact withthe flow of material inside. The hoses are madefrom FDA-approved ingredients suitable for foodand beverage handling. Their smooth interiors areeasily sterilized and cleaned. Both types have avacuum rating of 28 in./Hg.

NEWFLEX series ‘VFH’ is produced from a clearFDA core with an industrial grade white helix,which is not exposed to the hose I.D. It can handlelight-duty pressure discharge, gravity feed, andmoderate vacuum applications.

Physical Properties** SERIES SERIES FH & FHS VFHHardness, Shore A ±5 65 70Tensile Strength, psi 1900 2000Elongation at Break, % 440 420Brittle Temperature, °F -45 -42Max. Operating Temperature, °F 150 140

**Values listed are typical for the material used inmanufacture, except where noted, and are meant only as aguide to aid in design. Field testing should beperformed to find the actual values for your application.

T P R Tu b i n g

Suprene®

23

■ Made of first-quality, polypropylene-based, thermoplastic rubber (TPR)

■ Outstanding compression characteristics and toughness for peristalticpump uses

■ Maintains good flexibility at low temperatures

■ Free of conflict minerals, BPA and animal-derived ingredients

■ RoHS compliant

■ Autoclavable

■ FDA raw material complies with National Sanitation Foundationstandards (NSF-51) and FDA 21 CFR 177.2600

■ Meets UL94 HB burn rating


123c Medical Tubing

Notes

SUPRENE offers excellent flex fatigueresistance and good tear resistance, making it anideal choice for peristaltic pump applications. TheFDA raw material is suitable for a variety of cleanuses and is autoclavable to ensure cleanliness.

Physical Properties**Hardness, Shore A, ±5 69Tensile Strength, psi 957Elongation at Break, % 490Tear Strength, ppi 131Brittle Temperature, °F -76Maximum Recommended

Operating Temp., °F 275




Custom Services

Call for more information: 800-506-3924 or215-526-2300

■ Cut ■ Size

ID(IN.)1/8

3/161/41/4

5/163/83/81/25/83/4

OD(IN.)1/4

5/163/81/2

7/161/25/83/47/81

LBS. PER100 FT.

1.552.061.156.193.093.618.26

10.3212.3914.45

PART NO.

460 0246460 0414460 0582460 0638460 0694460 0862460 0974460 1310460 1646460 1926

WALL(IN.).062.062.063.125.062.062.125.125.125.125

Sold by standard length only (50 ft). Add length suffix to part number when ordering.Example: 50 ft. of 1/8” I.D. x 1/4” O.D. tubing is part number 460 0246-50. BOLD indicates the critical dimension for fittings application.

Made in U.S.A.

Custom ServicesCut

SizeColorCoilOver-

braidHeat Form

Hot Bond®Assemblies

HardnessMore

Tubing & HosePVCPolyurethaneSiliconeFluoropolymerNylonPolyethylenePolypropyleneTPRViton™LatexHytrel®

DISTRIBUTOR PARTNER 800-50-NEWAGE(800-506-3924)

215-526-2300Fax: 800-837-1856

[email protected]

145 James WaySouthampton, PA 18966www.newageindustries.com

AdvantaFlex®, AdvantaSil®, Clearflo®, “Fluid Transfer Specialists®,” Hot Bond®, Kwik Clamp™, NewAge®, NewAge Industries AdvantaPure®, Newflex®, Nylobrade®, Silbrade®, Silcon®, Superthane®, Suprene®, The "N" Logo, Thermobarb®,and Urebrade® are trademarks of NewAge® Industries, Inc. • Oetiker reg. TM Oetiker, Inc. • Hytrel reg. TM E. I. du Pont de Nemours and Company • Viton trademark The Chemours Company

NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 1954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age.

WARRANTY: NewAge Industries’ products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge. This warranty is limited only to the replacement of NewAge Industries'products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability. The data supplied is provided as a helpful guideline and is believed to be reliable; however, nothingstated shall constitute a guarantee, recommendation, or warranty for any application.

6/11/20© NewAge Industries, Inc. 2020 Specifications are subject to change without notice.

Other NewAge Industries Products

High Purity Tubing & HoseSanitary tubing, hose, fittings, assemblies,and molded components from ourAdvantaPure division meet the needs of the pharmaceutical, biopharm, food andbeverage, dairy and chemical industries, as well as other sanitary applications. Visitwww.advantapure.com to learn more.

123c

Fittings & ClampsThermobarb® Plastic - Precision molded barbed fittings in nylon-6, high density polyethylene, PVDF, polypropylene, reinforced nylon, or reinforced polypropylene. Sizes for 1/8” to 1” I.D. tubing in 15 styles.

Thermobarb® Brass - Durable brass barbed fittings. Sizes for 1/8” to 1” I.D. tubing in 10 styles.

Cam Operated Couplings - Molded from glass-fiber reinforced nylon or glass-fiber reinforced polypropylene. Sizes from 1/2” to 4” in 8 styles.

Oetiker® Ear Type Clamps - Stainless steel or zinc- plated carbon steel clamps with a unique breathable design. 35 sizes from 5/32” to 1-9/16” in 3 styles.

Kwik Clamp™ - Nylon double-bond hose clamps. 31 sizes from 1/4” to 4-1/4” nominal O.D.

Worm Gear Clamps - Stainless steel worm screw clamps. 28 sizes from 3/8” to 6” in 6 styles.

Tubing & Hose Cutting Tools

Sign up for our eNewsletter at www.newageindustries.com/extrusions

Documents

NewAge Industries' Tubing and Hose for Medical …...4 Silcon ® Silicone Tubing Meets FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces Able to resist extreme