Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
NEW XL³ 125 CABINET
Now it’sso easy
UP TO 125 A1 TO 4 ROWS OF 18 MODULESWorld Headquarters
and International Department128, av. du Maréchal-de-Lattre-de Tassigny87045 Limoges Cedex - France
: + 33 (0) 5 5506 87 87
email: [email protected]
www.legrandgroup.com
EXB
1006
1 -
July
201
0
I Tool-free removable railRails can be removed individually in asingle movement, and without any tools,for easier cable routing.
WIRING ON-SITEThe XL3 125 cabinet makes on-site installation easy,with the 3 functions opposite:
WIRING ON-SITE (CONTINUED)
Cable connection is easy, simply tilt the chassis up or downaccording to the direction of cable entry.
II Plug-in earth terminal blockTool-free removal of the earth terminalblock for easier cable routing.
Optimised wiring formaximum ease of installationand time-saving
III Removable cable entry plateThe cable entry plate can be removedwithout using any tools, to allow directcable entry.
I Tool-free removable railRails can be removed individually in asingle movement, and without any tools,for easier cable routing.
Tool-free pivoting chassisUnlock the chassis with a single action -no tools required.
WIRING ON-SITE (CONTINUED)
Cable connection is easy, simply tilt the chassis up or downaccording to the direction of cable entry.
WIRING IN THE WORKSHOPYou can also prepare yourinstallation flat with thechassis out of the cabinet.
II Plug-in earth terminal blockTool-free removal of the earth terminalblock for easier cable routing.
Integrated fittings for cable tiesCables can be anchored without anyadditional accessories. The fittings forcable ties are incorporated at the backof the cabinet, saving both time andmaterials.
Optimised wiring formaximum ease of installationand time-saving
III Removable cable entry plateThe cable entry plate can be removedwithout using any tools, to allow directcable entry.
New
XL³
125
cabi
net
01
FaceplateThe faceplate can beremoved one row at a time;fixed with ¼ turn screws.
Easy to install,maintain and use
EASY ACCESSThe faceplate can be removed one row at a time, orthe whole cover can be taken off, depending on theextent of the work to be carried out inside the cabinet:wiring or maintenance.
ALIGNING THE COVERPositioning the cover is simplicity itself.The alignment system ensures the cover is correctlypositioned in relation to the back of the cabinet,preventing incorrect fitting.
RAIL/FACEPLATE MARKINGEach rail and each faceplate can be markedfor easy positioning on the chassis or forquicker re-assembly after maintenance.
1/4
OR
02
Rail markingEach rail can be markedfor easy positioning onthe chassis.
Easy to install,maintain and use
CABLE ENTRY PLATEThe cable entry plate can be removed in a singleaction. With the various markings and cut-outs youcan adjust the wall trunking entry point in the cabinet.
The cabinet is compatiblewith the most commonlyused sizes of wall truningavailable on the market
ALIGNING THE COVERPositioning the cover is simplicity itself.The alignment system ensures the cover is correctlypositioned in relation to the back of the cabinet,preventing incorrect fitting.
RAIL/FACEPLATE MARKINGEach rail and each faceplate can be markedfor easy positioning on the chassis or forquicker re-assembly after maintenance.
Faceplate markingEach faceplatecan be markedfor even fastermounting.
New
XL³
125
cabi
net
03
Easy to install,maintain and use (continued)
FULLY REVERSIBLEThe base, chassis, faceplate and door are all fullyreversible, ensuring you have a faultless finishwhatever the location.
TOTAL FLEXIBILITY WHEN FITTINGTHE DOORThe door has a temporary fixing system to makeinstallation as easy as possible.
FIXING CENTRES MARKEDThe fixing centres (horizontal and vertical) aremarked directly on the base of the cabinet.No need for any additional drilling template.
DOCUMENT HOLDERThe self-adhesive document holder can be fixed directlyon the cabinet’s bottom faceplate.
180°
Temporary fixingThe door hinges are simplyclipped onto the cover.
Awaiting final fixingThe door is held in place withno additional support beforeit is finally fixed with screws.
Final fixingIt is finally fixed by screwingin the 2 cover screws.
04
Easy to install,maintain and use (continued)
TOTAL FLEXIBILITY WHEN FITTINGTHE DOORThe door has a temporary fixing system to makeinstallation as easy as possible.
FIXING CENTRES MARKEDThe fixing centres (horizontal and vertical) aremarked directly on the base of the cabinet.No need for any additional drilling template.
DOCUMENT HOLDERThe self-adhesive document holder can be fixed directlyon the cabinet’s bottom faceplate.
CHOICE OF MOUNTINGThe fixing holes are pre-cut and positionedso that it is easy to adjust the position ofthe cabinet on the wall.
Temporary fixingThe door hinges are simplyclipped onto the cover.
Awaiting final fixingThe door is held in place withno additional support beforeit is finally fixed with screws.
Final fixingIt is finally fixed by screwingin the 2 cover screws.
MARKING THE CIRCUITSEach circuit can be clearly marked on the faceplateusing the self-adhesive labels supplied with thecabinet.
“Hanging” fixing (1 point in the centre, 2 points at the bottom),adjustable “peripheral” fixing (4 fixing points).
New
XL³
125
cabi
net
05
Total adaptabilityfor your projectsup to 125 A
EQUIPMENT IN THE CABINET
Perforated plateThe perforated plate isused for easy integrationof non-modular equipment(electronic control box).
Modular equipmentModular equipmentcan be fixed directlyon the DIN rails in thecabinet.
DPX 125DPX 125 MCCBs can befixed on the DIN rail,placed in a low position.
Control unitsThe plain faceplatecan take Signis controland signalling units.
MosaicTM wiringaccessoriesThe optional fixing accessoryenables Mosaic mechanismsto be incorporated on eitherside of the cabinet.
Horizontal joining of two cabinetsof the same capacity
XL3 125 cabinets are designed to be suitable forthe widest variety of applications on your sites inthe residential and small business sectors.They can take a wide range of equipment, such as:- DPX 125 MCCBs- Signis control units- Mosaic sockets
VERTICAL OR HORIZONTALJOINING SYSTEMIt is easy to expand the capacity of the consumer unitwith the joining kit which can be used to joincabinets horizontally or vertically.
06
HandleIntegrated handle,door snaps shut. Canbe locked using theoptional key lock.
Total adaptabilityfor your projectsup to 125 A
Perforated plateThe perforated plate isused for easy integrationof non-modular equipment(electronic control box).
Modular equipmentModular equipmentcan be fixed directlyon the DIN rails in thecabinet.
DPX 125DPX 125 MCCBs can befixed on the DIN rail,placed in a low position.
Control unitsThe plain faceplatecan take Signis controland signalling units.
MosaicTM wiringaccessoriesThe optional fixing accessoryenables Mosaic mechanismsto be incorporated on eitherside of the cabinet.
DoorsThe doors are available in opaque or transparentversions for perfect integration in all locations.
Horizontal joining of two cabinetsof the same capacity
Joining kit(horizontal or vertical)
VERTICAL OR HORIZONTALJOINING SYSTEMIt is easy to expand the capacity of the consumer unitwith the joining kit which can be used to joincabinets horizontally or vertically.
NEAT DESIGN
Vertical joining of two differentcapacity cabinets
New
XL³
125
cabi
net
07
cex-EP0
for example: xxxxxxxxxxxxxxx
8Bold pack quantities: Minimum quantities to be ordered
XL3 125surface mounting distribution cabinets from 18 to 72 modules
XL3 125surface mounting distribution cabinets from 18 to 72 modules
4016 79 4016 764016 78 4016 77 4016 79 + 4018 64 4016 77 + 4018 72 4018 44
Technical characteristics (see opposite)
IP 40 - IK 09 with doorIP 30 - IK 09 without doorClass IISelf-extinguishing: resistance to incandescent wire 650°Conform to IEC 60439-3 and IEC 60670-24
Pack Cat.Nos Surface-mounting distribution cabinets
Capacity 18 modules per rowWhite RAL 9003Fully reversible cabinet (base, door and faceplates)Supplied with:- removable and pivoting chassis with 4 railsfitted. Rails can be individually removed for easycabling on site- removable cable entry plate (top and bottom)- removable faceplates (for each row)- IP 2X screw terminal blocks for neutral and earth- blanking plates (5 modules, separable per moduleor 1/2 module)- 1 sheet of self-adhesive labels for circuitidentification (marking per module)Spacing between rails 150 mmAdjustable 4 rail (2-position) for fitting modularequipment or DPX 125 moulded case circuitbreakersCan be fitted with perforated plates and solidfaceplates for mounting non-modular products(2, 3 to 4-row cabinets)Doors to be ordered separatelyNumber of
rowsNumber ofmodules
Height(mm)
Width(mm)
Depth(mm)
1 4016 76 1 18 300 450 1281 4016 77 2 36 450 450 1281 4016 78 3 54 600 450 1281 4016 79 4 72 750 450 128
Doors - IP 40 - IK 09For XL3 125 distribution cabinetsFully reversibleCan be equipped with lock and key n° 850Cat.No 4018 51
White RAL 90031 4018 61 For distribution cabinet Cat.No 4016 761 4018 62 For distribution cabinet Cat.No 4016 771 4018 63 For distribution cabinet Cat.No 4016 781 4018 64 For distribution cabinet Cat.No 4016 79
Transparent1 4018 71 For distribution cabinet Cat.No 4016 761 4018 72 For distribution cabinet Cat.No 4016 771 4018 73 For distribution cabinet Cat.No 4016 781 4018 74 For distribution cabinet Cat.No 4016 79
Pack Cat.Nos Accessories
Key lock2 4018 51 To be fitted on white or transparent doors
Supplied with key N° 850
Horizontal or vertical joining kit2 4018 45 For joining 2 cabinets
Fixing lugs1 4018 56 Set of 4 wall fixing lugs
Document holder2 4018 44 Self-adhesive document holder for plans
To be fitted on the cabinet
Blanking platesSeparable per module or 1/2 module
20 016 60 5 modules - white RAL 9003
Plain faceplates2 4018 55 For 2, 3 or 4-rows cabinets
Allow fitting of non-modular equipments such ascontrol and signalling units
Perforated platesTo be used instead of the one 4 rail whenintegrating non-modular products
1 4018 53 For 18 modules cabinets. Height 150 mm
Fixing accessory for Mosaic wiring devices5 4018 50 For fixing 2-module mechanisms on the side of the
cabinet
4018 45 4018 51
4018 50
4018 56
EnclosureCat.Nos
Neutral terminal blocksScrew connection
Earth terminal blocksScrew connection
6 - 25 mm2 1.5 - 16 mm2 6 - 25 mm2 1.5 - 16 mm2
4016 76 1 17 1 17
4016 77 1 21 1 21
4016 78 1 26 1 26
4016 79 1 34 1 34
EnclosureCat.Nos
Number ofblanking plates
5 modules
4016 76 1
4016 77 2
4016 78 3
4016 79 3
Number of connections per neutral and earth terminalblock (supplied with enclosure)
Number of blanking plates supplied per enclosure
Dimensions
x 2
x 4
x 4
450
A15
0
260B
Front view
Fixing centresand distance between rails
cex-EP0
for example: xxxxxxxxxxxxxxx
cex-EP0
9Bold pack quantities: Minimum quantities to be ordered
XL3 125surface mounting distribution cabinets from 18 to 72 modules
XL3 125surface mounting distribution cabinets from 18 to 72 modules
4018 44
Pack Cat.Nos Accessories
Key lock2 4018 51 To be fitted on white or transparent doors
Supplied with key N° 850
Horizontal or vertical joining kit2 4018 45 For joining 2 cabinets
Fixing lugs1 4018 56 Set of 4 wall fixing lugs
Document holder2 4018 44 Self-adhesive document holder for plans
To be fitted on the cabinet
Blanking platesSeparable per module or 1/2 module
20 016 60 5 modules - white RAL 9003
Plain faceplates2 4018 55 For 2, 3 or 4-rows cabinets
Allow fitting of non-modular equipments such ascontrol and signalling units
Perforated platesTo be used instead of the one 4 rail whenintegrating non-modular products
1 4018 53 For 18 modules cabinets. Height 150 mm
Fixing accessory for Mosaic wiring devices5 4018 50 For fixing 2-module mechanisms on the side of the
cabinet
4018 45 4018 51
4018 50
4018 56
EnclosureCat.Nos
Neutral terminal blocksScrew connection
Earth terminal blocksScrew connection
6 - 25 mm2 1.5 - 16 mm2 6 - 25 mm2 1.5 - 16 mm2
4016 76 1 17 1 17
4016 77 1 21 1 21
4016 78 1 26 1 26
4016 79 1 34 1 34
EnclosureCat.Nos
Number ofblanking plates
5 modules
4016 76 1
4016 77 2
4016 78 3
4016 79 3
EnclosureCat.Nos
A(mm)
B(mm)
4016 76 300 250
4016 77 450 365
4016 78 600 515
4016 79 750 665
Number of connections per neutral and earth terminalblock (supplied with enclosure)
Removable and pivoting chassis
Removable cable entry plate
Removable faceplate
Number of blanking plates supplied per enclosure
Dimensions
x 2
x 4
x 4
450
A15
0
260
B
Front view
Fixing centresand distance between rails
128.2
Side viewwithout door
150
Side viewwith door
Removablechassis
Pivotingchassis
Precut cable entry plate fordifferent sizes of trunking
Cabinet with rails, perforated plate, faceplates for DIN-railequipment and plain faceplate
Removablerail
NEW XL³ 125 CABINET
Now it’sso easy
World Headquartersand International Department128, av. du Maréchal-de-Lattre-de Tassigny87045 Limoges Cedex - France
: + 33 (0) 5 5506 87 87
email: [email protected]
www.legrandgroup.com
EXB
1006
1 -
July
201
0